and elbows are manufactured to NEMA TC-2, Federal specification WC1O94A
and UL 651 specifications. Fittings are manufactured to NEMA TC-3, Federal ...
Rigid Nonmetallic Conduit – Schedule 40 and Schedule 80 Carlon Rigid Nonmetallic Conduit (RNC), Fittings & Accessories ®
Carlon® manufactures the most complete line of nonmetallic conduits and fittings in the electrical industry. Carlon Schedule 40 and Schedule 80 conduits are designed for use aboveground and underground as described in the National Electrical Code. Specify only Carlon conduits and fittings to insure raceway system integrity.
Impact Resistant Carlon Schedule 40 and Schedule 80
Features
nonmetallic and will not rust or corrode. Carlon nonmetallic Schedule 40 and Schedule 80 conduits and elbows are manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. Fittings are manufactured to NEMA TC-3, Federal specification WC1094A and UL 651. Both conduit and fittings carry respective UL or ETL Listings and UL or ETL labels.
nonmetallic conduits are resistant to sunlight and are listed for exposed or outdoor usage. The use of expansion fittings allows the system to expand and contract with temperature variations.
Corrosion Resistant Carlon conduits and fittings are
Ease of Installation Nonmetallic conduits are 1/4 to 1/5 the weight of metallic systems, can be installed in less than half the time, and are easily fabricated on the job.
Safety Nonmetallic conduits are nonconductive, assuring a safe system.
Carlon Schedule 40 PVC Rigid Nonmetallic Conduit (RNC). (Heavy Wall EPC)
Listed for underground applications encased in concrete or direct burial. Also for use in exposed or concealed applications aboveground. • Sunlight resistant • Rated for use with 90˚C conductors • Superior weathering characteristics • Made in USA
ETL Listed to UL 651 in compliance to the NEC
E35297
RUS Accepted
Schedule 40 Heavy Wall With Integral Bell*
Part No. 10' 20' 49005-010 49007-010 49007-020 49008-010 49008-020 49009-010 49009-020 49010-010 49010-020 49011-010 49011-020 49012-010 49012-020 49013-010 49013-020 49014-010 49014-020 49015-010 49015-020 49016-010 49016-020 49017-010
49017-020
Trade Size 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6"
Std. Crate Qty. 10' 20' 6000' 4400' 8800' 3600' 7200' 3300' 6600' 2250' 4500' 1400' 2800' 930' 1860' 880' 1760' 630' 1260' 570' 1140' 380' 760' 260'
520'
Wt. Per 100' 17 23 34 46 55 73 124 163 196 232 315 409
Dimensions O.D. I.D. .840 .622 1.050 .824 1.315 1.049 1.660 1.380 1.900 1.610 2.375 2.067 2.875 2.469 3.500 3.068 4.000 3.548 4.500 4.026 5.563 5.047
Wall .109 .113 .133 .140 .145 .154 .203 .216 .226 .237 .258
6.625
.280
6.065
Rigid nonmetallic conduit is normally supplied in standard 10' lengths, with one belled end per length. For specific requirements, it may be produced in lengths shorter or longer than 10', with or without belled ends.
Use RNC Fittings with Schedule 40 and Schedule 80 Conduit.
220
Notes: 1. Special fittings and conduit sizes will be quoted on request. 2. DON’T FORGET TO ORDER CEMENT. 3. Carlon reserves the right to ship to the nearest unitized quantity.
w w w. c a r l o n . c o m
Rigid Nonmetallic Conduit – Support in Aboveground Installations Carlon Schedule 80 PVC Rigid Nonmetallic Conduit (RNC) (Extra Heavy Wall EPC-80) Listed for use in aboveground and belowground applications including areas subject to physical damage. • Sunlight resistant • Rated for use with 90˚C conductors • Superior weathering characteristics • Identified for use in areas subject to physical damage in accordance to 352.12(C)
With Integral Bell*
ETL Listed to UL 651 in compliance to the NEC
E35297
RUS Accepted
Schedule 80 Extra Heavy Wall Part No. 10' 20' 49405-010 49405-020 49407-010 49407-020 49408-010 49408-020 49409-010 49409-020 49410-010 49410-020 49411-010 49411-020 49412-010 49412-020 49413-010 49413-020 49415-010 49415-020 49416-010 – 49417-010 49417-020
Trade Size 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 4" 5" 6"
Std. Crate Qty. 10' 20' 6000' 12000' 4400' 8000' 3600' 7200' 3300' 6600' 2250' 3600' 1400' 2800' 930' 1880 880' 1760' 570' 1140' 380' – 260' 520'
Wt. Per 100' 21 30 44 60 72 101 154 210 308 428 588
Dimensions O.D. I.D. .840 .546 1.050 .742 1.315 .957 1.660 1.278 1.900 1.500 2.375 1.939 2.875 2.323 3.500 2.900 4.500 3.826 5.563 4.813 6.625 5.761
Wall .147 .154 .179 .191 .200 .218 .276 .300 .337 .375 .432
Rigid nonmetallic conduit is normally supplied in standard 10' lengths, with one belled end per length. For specific requirements, it may be produced in lengths shorter or longer than 10', with or without belled ends.
Notes: 1. Special fittings and conduit sizes will be quoted on request. 2. DON’T FORGET TO ORDER CEMENT. 3. Carlon reserves the right to ship to the nearest unitized quantity.
Use RNC Fittings with Schedule 40 and Schedule 80 Conduit.
Support of Carlon Rigid Nonmetallic Conduit in Aboveground Installations Table 352.30(B) NEC shows the support requirements for Schedule 40 and Schedule 80 rigid PVC nonmetallic conduit. Plastic conduit should always be installed away from steam lines, etc. Support straps should allow for lineal movement caused by expansion and contraction. Maximum ambient temperature is 122°F (50°C).
Trade Size 1/2 - 1 11/4 - 2 21/2 - 3 31/2 - 5 6
Maximum Spacing Between Supports (feet) 3 5 6 7 8
Acceptable Dimensions in Inches of Integral Bell per UL 651
A
C B
Table 352.30(B), NEC
Trade Size 1/2 3/4 1 11/4 11/2 2 21/2 3 31/2 4 5 6
A At Entrance (in.) Maximum
0.860 1.074 1.340 1.689 1.930 2.405 2.905 3.530 4.065 4.565 5.643 6.708
Minimum
0.844 1.054 1.320 1.665 1.906 2.381 2.875 3.500 3.965 4.465 5.543 6.608
B At Bottom (in.) Maximum
Minimum
0.844 1.056 1.320 1.667 1.906 2.381 2.883 3.507 4.007 4.506 5.583 6.644
0.828 1.036 1.300 1.643 1.882 2.357 2.853 3.477 3.977 4.476 5.523 6.584
w w w. c a r l o n . c o m
C Nominal Bell Depth (in.) 1.375 1.500 1.750 1.875 2.750 3.250 3.250 3.875 3.875 4.625 5.625 6.375 221
Canadian Rigid Nonmetallic Conduit – Schedule 40
Carlon Schedule 40 PVC Rigid Nonmetallic Conduit(RNC) (Heavy Wall EPC)
Certified for underground applications encased in concrete or direct burial. Also for use in exposed or concealed applications aboveground. • Sunlight resistant • Rated for use with 75˚C conductors • Superior weathering characteristics • Meets CSA Standard C22.2 No. 211.1 • 3/4"– 4" are FT-4 Rated
With Integral Bell*
Schedule 40 Heavy Wall Part No. 10' 20' 49005CC-010 49005CC-020 49007CC-010 49007CC-020 49008CC-010 49008CC-020 49009CC-010 49009CC-020 49010CC-010 49010CC-020 49011CC-010 49011CC-020 49012CC-010 49012CC-020 49013CC-010 49013CC-020 49014CC-010 – 49015CC-010 49015CC-020 49016CC-010 49016CC-020 49017CC-010 49017CC-020
Nom. Size 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6"
Std. Crate Qty. Wt. Per 10' 20' 100' 6000' 12000' 17 4400' 8800' 23 3600' 7200' 34 3300' 6600' 46 1800' 3600' 55 1400' 2800' 73 930' 1860' 124 880' 1760' 163 630' – 196 570' 1140' 232 380' 760' 315 260' 520' 409
Dimensions O.D. I.D. .840 .622 1.050 .824 1.315 1.049 1.660 1.380 1.900 1.610 2.375 2.067 2.875 2.469 3.500 3.068 4.000 3.548 4.500 4.026 5.563 5.047 6.625 6.065
Wall .109 .113 .133 .140 .145 .154 .203 .216 .226 .237 .258 .280
Acceptable Dimensions in Inches of CSA Listed Integral Bell A
C B
Trade Size of Conduit in Inches 1/2 3/4 1 1 1 /4 11/2 2 21/2 3 31/2 4 5 6
A At Entrance Maximum
0.860 1.074 1.340 1.689 1.930 2.405 2.905 3.530 4.065 4.565 5.643 6.708
B At Bottom
C Socket Depth
Minimum
Maximum
Minimum
Maximum
Minimum
0.844 1.054 1.320 1.665 1.906 2.381 2.875 3.500 3.965 4.465 5.543 6.608
0.844 1.056 1.320 1.667 1.906 2.381 2.883 3.507 4.007 4.506 5.583 6.644
0.828 1.036 1.300 1.643 1.882 2.357 2.853 3.477 3.977 4.476 5.523 6.584
1.500 1.500 1.875 2.000 2.000 2.000 3.000 3.125 3.250 3.375 3.625 3.750
0.652 0.719 0.875 0.938 1.062 1.125 1.469 1.594 1.687 1.750 1.937 2.125
Rigid nonmetallic conduit is normally supplied in standard 10' lengths, with one belled end per length. For specific requirements, it may be produced in lengths shorter or longer than 10', with or without belled ends.
Use RNC Fittings with Schedule 40 Conduit.
222
Notes: 1. Special fittings and conduit sizes will be quoted on request. 2. DON’T FORGET TO ORDER CEMENT. 3. Carlon reserves the right to ship to the nearest unitized quantity.
w w w. c a r l o n . c o m
LR90813
Carlon PVC Conduit Repair System The new, revolutionary, patented design Carlon PVC Conduit Repair System significantly reduces the time and money associated with repairing broken PVC conduits a.k.a. “stub-ups” in concrete slabs. The system is a line of couplings, adapters, reamers and plugs designed to allow contractors to quickly and easily repair broken PVC conduits without having to chip-away and re-pour concrete, while still maintaining the inside diameter of the conduit. Simply cut off the broken conduit; ream the ID of the conduit; and insert a coupling or adapter, it’s that easy. A job that normally takes 20 minutes can now be done in 2 minutes or less!
at A job thtakes ly normal nutes, 20 mi n 2 DONE i r so minute ! less
Features: • C-UL-US Listed • PVC Repair Fittings are listed in accordance with the NEC and Section 352.6 • Nonmetallic couplings, adapters and plugs won’t rust or corrode • Available in sizes 1/2" through 2" • Patented designed system
Benefits:
Reamer Kit
Reamer
• Saves time and money • Maintains inside diameter of conduit • Metallic Reamers for extra strength, durability and longer life • Quickly and easily repair broken PVC conduits Male Threaded Adapter
Specifications Couplings
Coupling
Plug
Male Threaded Adapters
Part No.
Trade Size
E910D E910E E910F E910G E910H E910J
1/2" 3/4"
1" 1 1/4" 1 1/2" 2"
Std. Ctn. Qty.
25 25 15 10 10 10
Reamers
Part No.
Trade Size
Std. Ctn. Qty.
E920D E920E E920F E920G E920H E920J
1/2"
25 25 15 10 10 10
3/4"
1" 1 1/4" 1 1/2" 2"
Schedule 40 Plugs
Part No.
Size
Std. Ctn. Qty.
E910REAMD E910REAME E910REAMF E910REAMG E910REAMH E910REAMJ
1/2"
12 12 10 10 10 10
3/4"
1" 1 1/4" 1 1/2" 2" All sizes - 1/2", E910REAMKIT 3/4", 1", 1 1/4", 1 1/2", and 2"
5
Part No.
Size
Color
Part No.
Size
Color Part No.
Size
Color
HL-6XR
1/2"
Red
HL-6XB
1/2"
Blue
HL-6XY
1/2"
Yellow 1 Bag of 50
HL-10R
3/4"
Red
HL-10B
3/4"
Blue
HL-10Y
3/4"
Yellow 1 Bag of 50
HL-13AR
1"
Red
HL-13AB
1"
Blue
HL-13AY
1"
Yellow 1 Bag of 50
HL-16R
1 1/4"
Red
HL-16B
1 1/4" Blue
HL-16Y
1 1/4" Yellow 1 Bag of 50
HL-18R
1 1/2"
Red
HL-18B
1 1/2" Blue
HL-18Y
1 1/2" Yellow 1 Bag of 50
HL-21R
2"
Red
HL-21B
w w w. c a r l o n . c o m
2"
Blue
HL-21Y
2"
Std. Ctn. Qty.
Yellow 1 Bag of 50
223