FECKEN-KIRFEL Splitter, M/N M8377, Type K-11, 460 Volts, 220mm/87”.
Working Width, New Spark/Dust Collector w/ 10 HP Variable Speed Drive Motor.
AUCTION
CAN’T ATTEND? JUST CLICK & BID!
BALTIMORE LOCATION CLOSED REAL ESTATE SOLD
ALL EQUIPMENT MUST BE SOLD!
RUBBER PRODUCTS
MANUFACTURING EQUIPMENT NEW 1996
3500 Pulaski Highway Baltimore, Maryland 21224 • SKINNER-SHAW K6A Intermix System
SKINNER-SHAW Intermix Mixer, #K6A, S/N 958A95291
NEW 1988
• FARREL BIRMINGHAM #11A Mixing System • FECKEN-KIRFEL K-11 Splitter • ERIE & FARRELL Drop Mills • FARRELL BIRMINGHAM Feed Mill • ALLEN Calendar • (10) EEMCO Presses • Lab Mixers, Presses & Ovens • Steam Generators • Dry Laminating System • Chiller
FECKEN-KIRFEL K-11 Splitter, M/N M8377
• Cooling Towers
THURSDAY, NOVEMBER 4 AT 10:00 A.M. (800) 722-3334 http://www.michaelfox.com email:
[email protected] NORTH AMERICAN OFFICES: CALIFORNIA, CANADA, FLORIDA, ILLINOIS, MARYLAND, NEBRASKA, NEW YORK, OREGON, PENNSYLVANIA, TEXAS, WASHINGTON ADDITIONAL OFFICES WORLDWIDE
FARRELL Drop Mill, 84”, S/N N-1132-R FARRELL BIRMINGHAM Mixer, #11A, S/N 75V412473
SKINNER-SHAW K6A INTERMIX SYSTEM - NEW 1996 SKINNER-SHAW INTERMIX Mixer, S/N 958A95291, Size K6A D.O. JAMES CHICAGO GEAR Gearbox, S/N 259042, Size SA402-23PRH, 16.94:151:1 HP, 850 RPM GE Motor, S/N JOB#2-313-06, 1500 HP, 700 Volts, 900 RPM BUDZAR Temperature Control W/(3) Zones For Sides, Rotors & Doors, M/N MXR-11-CSP, S/N 9509-380-2, 460 Volts, 3 Phase BUDZAR Oil Weigh-Up Temperature Unit, S/N 9503-380-1, 460 Volt, 3 Phase JOILET Digital Drive System, 2000A-3-Pole Unit, 600 Vac-Type RS OLSON Drytype Transformer, No. 20869-1DS-70861, 1500 KVA, 3 Phase BGE Switch Gear, Requisition #300-70799, Summary #0258A1453
ERIE Drop Mill, 100”, S/N M1185A5611
FACTS, INC. Process Control System-Facts-Mix-104, JOB-S0665, Red. Sch#S-0665-E1 (New 1995)
NEW 1996
FOREMOST Pellet Weigh-Up System, 460 Volts, 3 Phase
FARRELL BIRMINGHAM MIXING SYSTEM
A 10%
FARRELL BIRMINGHAM Mixer, S/N 75V412473, Size #11A
BUYER’S
FARRELL BIRMINGHAM Gear Box, S/N 1871, Order #D6075, Type SRH, Size 302, 300/600 HP, 450/900 RPM
PREMIUM
GE Motor, S/N 544942, 400 HP, 440 Volts, 720 RPM BAGHOUSE Automatic Dust Collector, S/N DS4110460, 460 Volts
APPLIES TO
Mill, 60” Size, 22”F/20”B Rolls
DROP & FEED MILLS
ALL ON-SITE
ERIE Drop Mill #1, S/N M1185A5611, Size 100”, 26”F/24”B Rolls, HORSHBURGH & SCOTT Gear Box, Size 280T, 41.10 Ratio, HP Rating 957 @ 1600 RPM, Unitized Frame WESTINGHOUSE Drop Mill #1 Drive Motor, S/N 10877M, 400 HP, 1000 RPM, 480 DC Volts w/ Drop Mill Drive-D-Line, S/N 10877, 400 HP, 480 Volts, 565 Amps FARRELL Drop Mill #2, S/N N-1132-R, Size 84”, 26”F/22”B Rolls, HORSHBURGH & SCOTT Gear Box, Size 280T, 41.10 Ratio, HP Rating 700 @ 1800 RPM, Blender & Drive on a Unitized Frame w/ RELIANCE, Drive Motor, S/N IEX827331-F1, 350 HP, 886 RPM, 480 DC Volts
2
FARRELL BIRMINGHAM Feed Mill, S/N 165, Size 84”, 26”F/24”B Rolls, LUFKIN Gear Box, Size D912, 39.2 Ratio, HP Rating 200 @ 720 RPM, Blender & Drive on a Unitized Frame w/ GENERAL ELECTRIC, Drive Motor, S/N 661209, 250 HP, 705 RPM, 440 DC Volts
< FOREMOST Pellet Weigh-Up System
PURCHASES CALENDAR ALLEN Calendar, S/N 62AD1375, 2-16” x 48” Rolls, WESTINGHOUSE Control, Gear Box, Farrel Size SRA11, HP Rating 75 @ 1700 RPM
SPLITTER FECKEN-KIRFEL Splitter, M/N M8377, Type K-11, 460 Volts, 220mm/87” Working Width, New Spark/Dust Collector w/ 10 HP Variable Speed Drive Motor (New 1988)
NEW 1997
ALLEN Calendar, 2-16” x 48” Rolls
STEAM GENERATORS CLAYTON Steam Generator, S/N 23435, 240 HP, Max. Working Pressure 300, Max. Heat Input 0680.000 Btu/Hr, 460 Volts, 3 Phase (New 1997) CLAYTON Steam Generator, S/N 23433, 240 HP, Max. Working Pressure 300, Max. Heat Input 96380.000 Btu/Hr, 460 Volts, 3 Phase (New 1997) CLAYTON Steam Generator, S/N 23434, 240 HP, Max. Working Pressure 300, Max. Heat Input 96380.000 Btu/Hr, 460 Volts, 3 Phase (New 1997)
MOLD CLEANING SYSTEM MAXI-BLAST, INC. Mold Cleaning System (New 1996)
CLAYTON Steam Generator System, 240 HP Each, S/N’s23433, 23434, 23435
PRESSES
NOTE: Exclusive rigging rights for these presses has been awarded to North American Millwright. For price quotes, contact Bruce Boggan (410) 335-1396. Each Press Includes a Set of 7-8 Platens Plus Bolster & Ram
TANKS
Press #2, 46” Openings/Daylight w/o Platen, 7/24-1/2” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 585 Tons @ 2500 Psi, 5-1/2” Strain Rod Diameter, 24” Ram Size, 2” Pipe Opening
BRUNNER ENGINEERING AND MANUFACTURING High Pressure Make-up Tank, S/N XX, 16” Dia. X 13’ Tall, Max. Working Psi: 3000 Psi @ 450° (New 2000)
EEMCO Press #3, 41” Openings/Daylight w/o Platen, 5/23-1/2” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 585 Tons @ 2500 Psi, 5-1/2” Strain Road Diameter, 24” Ram Size, 2” Pipe Opening
(2) CODD FABRICATORS High Pressure Make-up Tanks, S/N 37228-1 & 37228-2, 18” Dia. X 20’ Tall, Max. Working Psi: 450 Psi @ 650°F (New 1999)
EEMCO Press #4, 42” Openings/Daylight w/o Platen, 5/25” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 585 Tons @ 2500 Psi, 5-1/2” Strain Rod Diameter, 24” Ram Size, 2” Pipe Opening
EMBOSSER
EEMCO Press #6, 45” Openings/Daylight w/o Platen, 4/24” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 884 Tons @ 2500 Psi, 7-3/4” Strain Rod Diameter, 30” Ram Size, 3” Pipe Opening
CIMATEC Embosser, 48”W Pattern Roll (New 1983) < EEMCO Press, Openings/ Daylight w/o Platen - 44”, 770 Tons @ 2500 Psi (Includes a Set of 7-8 Platens Plus Bolster & Rams)
EEMCO Press #7, 45” Openings/Daylight w/o Platen, 4/28” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 884 Tons @ 2500 Psi, 7-3/4” Strain Rod Diameter, 30” Ram Size, 3” Pipe Opening EEMCO Press #8, 41” Openings/Daylight w/o Platen, 585 Tons @ 2500 Psi, 5-1/2” Strain Rod Diameter, 24” Ram Size, 3” Pipe Opening EEMCO Press #9, 45-1/2” Openings/Daylight w/o Platen, 6/25-3/4” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 585 Tons @ 2500 Psi, 5-1/4” Strain Rod Diameter, 24” Ram Size, 2” Pipe Opening EEMCO Press #10, 44” Openings/Daylight w/o Platen, 770 Tons @ 2500 Psi, 6-1/2” Strain Rod Diameter, 28” Ram Size, 2” Pipe Opening EEMCO Press #14, 45-1/2” Openings/Daylight w/o Platen, 4/27-1/4” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 884 Tons @ 2500 Psi, 8-1/2” Strain Rod Diameter, 30” Ram Size, 3” Pipe Opening EEMCO Press #17, 44” Openings/Daylight w/o Platen, 4/24-1/2” Openings/Daylight w/ Platen, 42” x 42” Deck Size, 884 Tons @ 2500 Psi, 7-1/8” Strain Rod Diameter, 30” Ram Size, 3” Pipe Opening
CHILLERS > ERIE Press, 884 Tons @ 2500 Psi (Includes a Set of 7-8 Platens Plus Bolster & Rams)
PRECISION HEAT EXCHANGE CO. Twin Chiller Unit, Compressor Make/Size: Vilter/VMC 440, S/N 0002458, DELCO Compressor Motors, 150 HP Each, 440 Volts, 1780 RPM, Compressor S/N 1-D-67/2-2-67, (New 1967, Re-tubed 1997, Compressors Rebuilt 1997)
SOME ITEMS MAY BE SUBJECT TO PRIOR SALE 3
REB UI 1997 LT
^ BALTIMORE AIR COIL Cooling Tower, M/N VT1-395-RC, S/N 41101120 BID LIVE ON-LINE
PRECISION HEAT EXCHANGE Twin Chiller Unit, 150 HP, S/N 0002458
COOLING TOWERS MAYER REFRIGERATION INC. Cooling Tower #1, Overall Size: 10’W x 14’l x 16’H, Piping Size: 5” Feed, 6” Return w/ (2) WESTINGHOUSE Motors, 15 HP, 220/440 Volts, 1755 RPM BALTIMORE AIR COIL Cooling Tower #2, M/N VT1-395-RC, S/N 41101120, Overall Size: 8’W x 16’L x 14’H, Piping Size: 8” Feed, 8” Return
www.michaelfox.com
> (2) FOREMOST 40’ x 12’ Storage Silos
NEW 1997
BALTIMORE AIR COIL Cooling Tower #3, M/N VT0-176-OMCXR, S/N R99108451, Overall Size: 5’W x 12’L x 13’H, Piping Size: 6” Feed, 12” Return
STORAGE SILOS (2) FOREMOST, Storage Silos, 12’ Diameter, 40’ Tall (New 1978)
LAB PRESSES (2) RELIABLE Lab Presses, Electric – Left/Right, 28” Openings/ Daylight w/o Platen, 2/24-1/2” Openings/Daylight w/ Platen, 24” x 24” Deck Size, 2500 Ton, 100 Psi, 3-1/2” Strain Rod Diameter, 3-1/2” Ram Size, 2-1 Bushing Pipe Opening, 460 Volts, 3 Phase, Self-Contained Hydraulic Unit (New 1997) Lab Press #2, 27-1/2” Openings/Daylight w/o Platen, 2/12-1/2” Openings/Daylight w/ Platen, 24” x 24” Deck Size, Ton 2500, 141 Psi, 3-1/4” Strain Rod Diameter, 12” Ram Size, 1” Pipe Opening, (3) Unused Decks Lab Press #1, 23” Openings/Daylight w/o Platen, 2/13-1/2” Openings/Daylight w/ Platen, 24” x 24” Deck Size, Ton 2500, 141 Psi, 3-1/4” Strain Rod Diameter, 12” Ram Size, 1” Pipe Opening, (1) Unused Deck
OVENS
(2) Electric Lab Presses, 2500 Ton
DESPATCH Oven, S/N 68398, Size: 14’W x 15’8” Deep x 14’H, Motor: 440 Volts, 3 Phase, 60 Cycle, Max. Operating Temperature: 350°F, DESPATCH Gas Fired Batch Type Oven (2) KOCH Ovens, M/N HBG-5-17-10, S/N 932-1350, Size: 15’4”W x 17’10” Deep x 9’6”H, Motor: 460 Volts, 3 Phase, 60 Cycle, Max. Operating Temperature: 650°F, Gas Oven (New 1983) DEVILBIS Oven, Size: 9’W x 9’8.5” Deep x 11’H, 350° Temperature Range, Gas Oven DEVILBIS Oven, Size: 9’W x 9’8.5” Deep x 11’H, 350°F Temperature Range, Electric Oven
LAB OVENS DESPATCH Lab Oven 14649-1, S/N 75938, 2-19” x 19” Shelf Opening, 600°F Temperature AMINCO Lab Oven, S/N 14649-1, 3-24” x 36” Shelf Opening, 550°F Temperature
DESPATCH Gas Fired Batch Type Oven, 14’ x 15’8” x 14’, S/N 68398
4
NEW 1997
REB U 200 ILT 0
DAVID BRIDGE Lab Mixer #2
FORKLIFTS RELIABLE Lab Mixer #1, 6-1/2” x 7”
LAB MIXERS
RELIABLE Lab Mixer #1, Size 6-1/2” x 7”, 40 HP Variable Speed, 440 Volts, 3 Phase, Ram/Stroke: 1-1/2”/21” DAVID BRIDGE Lab Mixer #2, 30 HP, 1750 RPM, 500/240 Volts, Ram/Stroke: 1”/14” (Rebuilt 2000)
AIR COMPRESSORS
INGERSOLL RAND Air Compressor, S/N L1135D93, Size: 13.5” x 8.25” x 5”, Type LL3A100, 100 HP, 880 RPM, 230/460 Volts, Discharged Pressure: 125 (New 1993) WAYNE Air Compressor, M/N 350-19, S/N 231324-L, Size: 6” x 3-1/4” x 3-1/2”, 220/440 Volts, Discharged Pressure: 200 Max. (New 1990/91)
LAMINATING SYSTEM
HYSTER Riding Electric Forklift, M/N E408, S/N B108V08084C, 5000 Lb. Capacity, Side Shift w/ Charger HYSTER Riding Electric Forklift, M/N E50XM, S/N F108V03328S, 5000 Lb. Capacity, Side Shift w/ Charger HYSTER Riding Electric Forklift, M/N E50XL-33, S/N C108V01536F, 5000 Lb. Capacity, Side Shift w/ Charger HYSTER LP Gas Riding Forklift, M/N 840-XMS, S/N D001H05287W, 4000 Lb. Capacity, Side Shift
MAINTENANCE SHOP CLEVELAND Milling Machine, M/N 2U, S/N 2.066, 11” x 55” Table w/ 39” Travel, 9.75 HP, 550/3 Volts REED PRENTICE Sliding Gear Head Lathe, S/N 62211, Drive Pulley 450 RPM, 20” Stand HOBART Generator/Welder, S/N AAW-1640, 10 HP
KANNEGIESSER Dry Laminating System, M/N D4973, S/N 53585 w/ TRIMAR Positioning/Feed System, M/N 10615, 12’L x 5.5’W Cooling Table & Cutter
LINCWELDER Welding Machine, M/N DC250MK, S/N A17646
PUMPS
MILWAUKEE Heavy Duty Band Saw
G&L PUMPS.ITT INDUSTRIES Process Water Pump, M/N 772B2M5E0, S/N 2182874, Size: 8” x 6” x 11”, UNIMOUNT 125 Motor, 15 HP, 1765 RPM, 230/460 Volts
Wrenches, Chains, Sockets, Machines, Ladders and More!
INGERSOLL RAND Process Water Pump, M/N Type HC, S/N 0791/4040, Size: 5” x 4” x 12”B, GENERAL ELECTRIC Motor, 40 HP, 1770 RPM, 230/460 Volts INGERSOLL DRESSER Process Water Pump, M/N D814, S/N 30868931, Size: 3” x 3” x 8”, BALDOR Motor, 40 HP, 3540 RPM, 230/460 Volts INGERSOLL DRESSER Process Water Pump, S/N 6019885, Size: 4” x 3” x 8”, MARATHON Motor, 40 HP, 3540 RPM, 230/460 Volts G&L PUMPS.ITT INDUSTRIES Process Water Pump, M/N SST, S/N F9812974, Size: 1” x 2” x 6”, BALDOR Motor, 5 HP, 3540 RPM, 230/460 Volts GOULDS Low Pressure Pump, M/N 3316, S/N 299B646, Size: 2” x 3” x 11”, BALDOR Motor, 100 HP, 3530 RPM, 230/460 Volts (New Motor 2002)
EVOCUTION Metal Cutting Circular Saw, M/N TCT JOHNSON Horizontal Band Saw, S/N 7867 Worktables,
Strapping
MISCELLANEOUS Modular Offices, 12’W x 20’L x 7’5”H, (2) Corner Windows, (1) Standard Door (New 1998) w/ CARRIER, Window Unit Air Conditioner Modular Walls in Z Formation (Lab), Track Mounted (Can Be Reconfigured), (6) 4’ x 8’ Panels w/ Windows, (9) 3’ x 8’ Plain Panels, 6’ x 6’8” Double Doors CORAYVAC Ceiling Mounted Ultra Violet Heating System w/ R.G. ROBERTS GORDON SYSTEM Control & Blower, Approx. 1200’ CONTINENTAL Hydraulic Rubber Cutter w/ Polypac System Center SOUTHWORTH 2’ x 4’ Scissor Lift WESTINGHOUSE Air Circuit Breaker, Type D875
NEW 1993
5
KANNEGIESSER M/N D4973 Dry Laminating System, S/N 53585
HYSTER 5000 Lb. Cap. Riding Electric Forklift
INGERSOLL RAND 100 HP Air Compressor, S/N L1135D93
This Sale will be a 'Webcast' auction, which enables you to bid securely in real-time from the comfort of your own computer. To utilize this service, register with Michael Fox International at www.michaelfox.com. To learn more about how a webcast works, please go to the Support section on our homepage and choose "Webcast Instructions". TERMS OF SALE
NO WARRANTIES: Every item and lot in the "Auction" is sold: (a) "AS IS, WHERE IS, AND WITHOUT RECOURSE," and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise. PAYMENT: A 10% buyer's premium applies to the purchase price of all on-site purchases. A 13-½ % buyer's premium applies to the purchase price of all on-line purchases. A minimum deposit of 25% will be required in order to bid. Cash or certified funds required in full at the time and place of auction. Non-certified checks will NOT be accepted unless accompanied by a valid bank letter of guarantee, which must be in the following format: This bank guarantees payment to Michael Fox International, Inc. from (name of customer) on account #_______ up to the amount of $ _____. This letter is valid for purchases at the auction held at Monarch Rubber Company on November 4.
INSPECTION
Wednesday, November 3 from 10:00 A.M. to 4:00 P.M. or by appointment.
REMOVAL
ALL equipment must be removed no later than Wednesday, November 24.
OVERNIGHT ACCOMMODATIONS
AIRPORT: Hampton Inn.........................................................................(410) 850-0600 Holiday Inn............................................................................(410) 859-8400 Marriott BWI Airport.............................................................(410) 859-8300 DOWNTOWN: Hilton....................................................................................(410) 539-8400 Holiday Inn............................................................................(410) 685-3500 Marriott.................................................................................(410) 385-3000
DIRECTIONS
E
From Baltimore/ Washington International Airport: Take the airport exit (I-195 West) to Exit 295 North, the Baltimore/Washington Parkway. Follow 295 North to the I-895/Harbor Tunnel exit. Go through tunnel. Take exit 12 (Lombard St.). At end of ramp turn right. At the second traffic light make a right onto Kresson St. At the light make a left onto Pulaski Highway (Route 40 west) to the auction site on the right.
SIT
RT
O
RP
AI
N
IO
CT
AU
AIRPORT & TRANSPORTATION
The area is served by the Baltimore/Washington International Airport, approximately 14 miles southwest of the auction site. INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED.
EVER WONDER.....WHAT ARE MY ASSETS WORTH? For a confidential appraisal of your assets, please call (800) 722-3334!
FINANCE YOUR AUCTION PURCHASE
Conserve Your Cash and Increase Your Bidding Power AuctionLease Provides M&E Financing With Approvals from $5,000 to $999,000 (800)438-1470 * Apply Online: www.AuctionLease.com "Buy What Appreciates, Lease What Depreciates" J. Paul Getty
AUCTION BALTIMORE LOCATION CLOSED • ALL EQUIPMENT MUST BE SOLD!
RUBBER PRODUCTS MANUFACTURING EQUIPMENT FIRST CLASS MAIL
POSTMASTER: Dated Material. Please Deliver Promptly. EXECUTIVE OFFICES:
11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117 (410) 654-7500 (800) 722-3334 FAX (410) 654-5876
40 OFFICES IN 20 COUNTRIES GoIndustry · Michael Fox International · Henry Butcher International · Karner & Co · Appelboom
http://www.michaelfox.com email:
[email protected]
MONARCH RUBBER COMPANY BALTIMORE, MARYLAND
THURSDAY, NOVEMBER 4 AT 10:00 A.M. MFI-7654
PRESORTED First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 305