information (for e.g. course content, address/location etc.) ... Siemens Motion
Control Courses are held at our Eklavya Training Center in Bangalore.
s Siemens Training Centres in India (Address & Contacts) Siemens-SITRAIN Centres, India 1) SITRAIN - India Siemens Training Centre TSDC, Kalwa Works, Thane-Belapur Road Thane-400601 Contact: Ms. Avanti Satam Phone: 022 27623024/3566 Email:
[email protected]
3) ATC - West Esskay Services Block No-801-802, B Wing Techno City Plot No. X-4/1 & X-4/2 TTC Inductrial Area, Mahape Navi Mumbai-460710 Contact: Ms. Priyanka Phone: 022-27882881 Email:
[email protected]
5) ATC - East Esskay Services G-09, Matrix Tower, Plot#24, Block DN Sector-5, Salt Lake City Kolkata-700091 Contact: Ms. Priyanka Phone: 033-40044078 Email:
[email protected]
2) ATC - South Karunya University Karunya Nagar Coimbatore-641114 Contact: Dr. Suresh Kumar Phone: 09487846530 Email:
[email protected]
4) ATC - North Industrial Automation Training Centre 178, Phase II, Industrial Area, Panchakula-134113 HARYANA, Contact : Ms. Jyoti Bharti, Tel: 0172-5044417 Contact : Ms. Jyoti Bharti, Tel: 0172-5044417 Email:
[email protected]
6) ATC - Central City: Nagpur (Detail-address will be announced soon)
7) Siemens Machine Tools Drives Training Eklavya Learning Centre 2nd Floor, Du Parc Trinity (Next to Big-Kids Kemp No-17, M.G. Road, Bangalore-560001 Tel: 080 67891665, Contact: Ms. Vidya Balakrishna Contact: Ms. Vidya Balakrishna Email:
[email protected] All the transactions for Industry or Colleges (mainly commercial transactions) like Training Order, Payment should be done necessarily through your nearest Siemens Regional (Sales or Service) Office only. You may contact us here at KALWA Training Centre or Bangalore Training Centre directly, for respective general / technical information (for e.g. course content, address/location etc.)
© Siemens Ltd., 2010
s SITRAIN-India (Siemens Training, Industry Sector) Future-Oriented CNC Training A team of qualified professionals is a decisive success factor in the metalworking industry. Trained CNC operators and programmers are the key to increased productivity. Innovative, efficient and holistic solutions are a must to help the trainees be optimally prepared to perform their tasks quickly and efficiently. Siemens offers effective and integrated training solutions, encompassing all requirements.
Siemens CNC Training Siemens Motion Control Courses are held at our Eklavya Training Center in Bangalore. These classes are small by design and are led by experienced Siemens personnel as well as by qualified external faculty with extensive Fill this registration form and send it to us via fax or courier. Alternatively, our training partners can be contacted for Siemens Authorized CNC Training Centers: 1) Siemens Esskay Training Center, Pune Tel:. +91 20 27111065, 27111066,
[email protected] 2) Government Tool Room and Training Center (GTTC), Bangalore Tel No. +91 80 32510197,
[email protected] www.gttcnet.com 3) Christiani Sharpline Pvt. Ltd., MumbaiTel: +91 22 22948254,
[email protected] 4) GKD Institute for Technological Resources, Coimbatore Tel : +91 422 2360395,
[email protected] http://www.gkditr.co.in/ 5) Indo Danish Tool Room (IDTR), Jamshedpur Tel: +91 657 2904073,
[email protected] www.idtrjamshedpur.com 6) Don Bosco Technical School, Kolkata Tel: +91 33 26555431
[email protected] www.dbllh.org 7) Don Bosco - St. Joseph’s I.T.I., Kurla, Mumbai Tel: +91 22 25042424,
[email protected] Siemens also offers Worldwide Training Courses. Learn more
Siemens On-Site Training Bringing our knowledge to your doorstep Siemens offers the facility of training a large number of staff with our on-site training option. Our engineers will travel to the required location and conduct courses on-site without compromising on quality of training.
CNC Training Software – SINUTRAIN Ever-increasing complexity of training needs call for comprehensive turnkey for CNC training systems. At Siemens, we tackle this need with SINUTRAIN, a control-identical, field-oriented, PC based training software. We offer a complete range of optimized solutions for efficient CNC training – across all training levels, fromthe basics all the way to final
Benefits at a glance: First steps on the PC with control-identical software DIN-compliant programming and ShopMill, ShopTurn programming Simple programming with integrated online help Trainee locations can be linked to form a didactic network Optional linking to CAD system for rapid program creation
© Siemens Ltd., 2010
s General Notes & Commercial Terms (Common to all Training Centres under SITRAIN-India) Note : Training Centre (SITRAIN-Siemens Kalwa) & 4-ATCS (Authorised Training Centres) are all centrally coordinated, monitored & controlled by Siemens-Sitrain, Kalwa. MCMT (Machine Tool Drives) Training at Bangalore/Pune & GTTC are controlled from Bangalore. 1> (a) All the Basic & Advanced courses will be conducted at Siemens Ltd., Kalwa Works, Thane-Belapur Road, Thane - 400 601 (Maharashtra). (b) Basic courses, will be also conducted, in our Authorized Training Centres (ATCs) i.e. Esskay-Navi-Mumbai, Karunya-Coimbatore, IATC- Patchouli, Esskay-Calcutta & ATC-C (Nag 2> Registration-booking of seats for all clients at All Training Centres & Courses will continue to be made Centrally at SITRAIN-Kalwa by Email / Phone: +91 (022) 27623208 / 27623024. (Contact Ms Avanti Satam or Mr. Nilesh Sawant) or through nearest Siemens IA-DT-BT/LV Sales/Service office. E-mail :
[email protected], You may also contact nearest Siemens Regional Office3> Course fee is to be paid in advance only on confirmation of seat, in the form of DD/Cheque drawn in favor of Siemens Ltd. & payable at Mumbai or location of our Regional Office The course fee includes the course material, breakfast, lunch and tea. The training is non residential. 4> Since there are limited seats in each programme, the seats are confirmed on 1st come 1st served basis. The course timings are from 8.30 AM to 5.00 PM. 5> (A) Every attempt will be made to conduct the courses as announced. We shall do our best to send timely communication in such situations, if possible. However we reserve the right to postpone or cancel the courses due to inadeqaute booking or circumstances beyond our control. We shall do our best to send timely communication in such situations. (B) Every attempt will also be made to accommodate the participants with Seats at nearest (geographically) Siemens Training Centre in your area. This is valid for all parts of India including North/South/East/West. Presently (till 31.12.10) Central region clients will be given seats in any one of other 5-Training Centres. 6> Kindly contact us for course contents and information on pre-requisite qualification / knowledge to attend the courses. (Almost all courses require Diploma/Degree in Engineering as basic qualification) 7> Please note that the course fee is inclusive of service tax at present applicable rate of 10.3 %. However any change in the service tax rate will be accordingly applied at actuals. 8> Please note that Rupees rates are applicable only for Indian Nationals sponsored by Indian Companies (Companies physically located in India). For Foreign Nationals or Indian Nationals sponsored by Foreign Companies rates will be quoted in EURO. Kindly contact us for more details on the same 9> (a) Participants attending courses like TIA Advanced, WinCC, NET, PCS 7 are recommended to attend TIA Basic with S7 300/400 before they come for these courses, or should have an equivalent knowledge / experience on S7 - 300 & Step-7 Programming. (b) Participants attending MASTERDRIVES MC or SIMOTION-D should have good knowledge about AC Drives (like Master Drives or Sinamics S120 or attended these courses). (c) Participants attending DCS courses (PCS-7 Basic or Advance) should have good knowledge on PLCs preferrably Simatic S-7 PLCs & Step-7 Programming (or attended these courses). 10) All the transactions (mainly commercial) like Training Order, Payment should be done necessarily through your nearest Siemens Regional (Sales or Service) Office only. You may contact us here at Kalwa Training Centre or Bangalore Training Centre directly for respective general / technical information (for e g course content address/location 11) Very Special Discounted Prices are available for College-Courses (But Subject to Training-Order of Minimum 50-60 Students in 1-Order) 12) Stay-Hotel Notes : For Thane/Kalwa & Navi-Mumbai, we have attached list of Hotels for your reference. For Coimbatore, Chandigarh, Calcutta, Bangalore & Pune, please contact the respective Training Centres directly to get the Hotel-list from them. General Notes for MCMT Training Centres (Eklavya-Bangalore & Esskay-Pune) Please Note : We have already attached the complete calendar (Oct.10-Mar.11) along with the realted terms conditions for Machine tool drive-trainings herewith (please refer). 1> The courses are conducted at Siemens Ltd., Eklavya Learning Center, 2nd Floor, Du parc Trinity (Next to Big Kids Kemp) No. 17, M.G. Road, Bangalore - 560001 (Karnataka). 2> Registration of seats for Training Courses can be made by fax or email . Phone: +91 (080) 6789 1665 Fax: +91(080) 6789 1580
(Contact : Ms Vidya Balakrishna.)
For further details please mail to
[email protected] . Alternatively your order can be sent to our Training Center via post courier. 3> It is recommended that you contact Eklavya-Bangalore for all the further detailed Techno-Commercial information on our MCMT-Drives Training at Bangalore & Pune. 3> It is recommended that you contact Eklavya-Bangalore for all the further detailed Techno-Commercial information on our MCMT-Drives Training at Bangalore & Pune.
© Siemens Ltd., 2010
s Siemens Machine Tool Drives Training Schedule: Oct’10– Mar’11 (At Bangalore) Product
Topic
Duration
Schedule
*Sinumerik 802D / 802Dsl
Turning Operating and Programming
5 days
11.10 – 15.10.2010 AT GTTC
7,000.00
Sinumerik 802D Solution Line + Sinamics
Maintenance & Commissioning
5 days
11.10 -15.10.2010
10,000.00
Simatic S7-300
Basics & integration with Sinumerik controls
5 days
18.10 -22.10.2010
Sinumerik 810D/840D
Maintenance & Commissioning
5 days
+10.3% ST + 10.3% ST 13,700.00 + 10.3% ST 13,700.00
Sinumerik 810D/840D
Advanced-Commissioning
5 days
25.10 - 29.10.2010 (At GTTC) 08.11 - 12.11.2010
Sinumerik 810D/840D/840Di
Maintenance-Commissioning
5 days
15.11- 19.11.2010
Simodrive 611 A / U + Profibus
Commissioning & Diagnosis
5 days
22.11 -26.11.2010
Sinumerik 840Dsl
Maintenance-Commissioning
5 days
29.11 – 03.12.2010
*Sinumerik 810 / 840 D
Milling Operating and Programming
5 days
06.12 -- 10.12.2010 AT GTTC
Sinumerik 810D/840D
Maintenance & Commissioning
5 days
+ 10.3% ST 13,700.00 + 10.3% ST 13,700.00 + 10.3% ST 13,700.00 + 10.3% ST 13,700.00 + 10.3% ST
(Solution Line)
8,000.00 +10.3% ST 13,700.00
06.12 -10.12.2010
+ 10.3% ST
Sinumerik 802D
Maintenance & Commissioning
5 days
10,000.00 13.12 - 17.12.2010
+ 10.3% ST
Simatic-S7 300
Basics & integration with Sinumerik controls
5 days
20.12 -24.12.2010
13,700.00
Sinumerik 810D/840D
Maintenance & Commissioning
5 days
27.12 – 31.12.2010
Sinumerik 810D/840D
Milling Operating and Programming
5 days
17.01 – 21.01.2011
+ 10.3% ST 13,700.00 + 10.3% ST 8,000.00 + 10.3% ST 10,000.00
5 days
24.01 – 29.01.2011 26th Holiday in lieu of Republic day 31.01 -04.02.2011
Basics & integration with Sinumerik controls
5 days
07.02 -11.02.2011
13,700.00
Maintenance-Commissioning
5 days
14.02 -18.02.2011
Maintenance & Commissioning
5 days
21.02 -25.02.2011
* Sinumerik 802D / 802D sl
Turning Operating and Programming
5 days
28.02 – 04.03.2011 AT 7,000.00 GTTC +10.3% ST
Sinumerik 810D/840D
Tool Management
5 days
28.02 – 04.03.2011
Sinamics-S110 / 120
Standalone Start up / commissioning / Integration on Profibus
5 days
07.03 -11.03.2011
Sinumerik 802D Solution Line + Sinamics
Maintenance & Commissioning
5 days
14.03 -18.03.2011
Sinumerik 810D/840D
Maintenance & Commissioning
5 days
21.03 -.25.03.2011
Sinumerik 802D Solution Line + Sinamics
Maintenance & Commissioning
5 days
Sinumerik 810D/840D
Maintenance & Commissioning
Simatic-S7 300
Sinumerik 840Dsl
+ 10.3% ST 13,700.00 + 10.3% ST + 10.3% ST 13,700.00 + 10.3% ST
Sinumerik 810D/840D
13,700.00 + 10.3% ST
13,700.00 + 10.3% ST 13,700.00 + 10.3% ST 10,000.00 + 10.3% ST 13,700.00 + 10.3% ST
NOTE : For all further Technical & commercial details like Course-contents, Information on Hands-on/Practicals & Quotations, Proforma-Invoive, Invoicing/Billing & payment terms/conditions etc., please contact the MCMT Training-centre at Bangalore. Address & Phone numbers mentioned on last page.
Eklavya Learning Centre, Bangalore 2nd Floor, Du Parc Trinity (Nxt to Big Kids Kemp) Contact: Ms. Vidya Balakrishna e.mail:
[email protected] No. 17, M. G. Road, Bangalore - 560001 Tel:080 6789 1665
© Siemens Ltd., 2010
s Siemens Training Centres in India (Address & Contacts) Siemens-SITRAIN Centres, India 1) SITRAIN - India Siemens Training Centre TSDC, Kalwa Works, Thane-Belapur Road Thane-400601 Contact: Ms. Avanti Satam Phone: 022 27623024/3566 Email:
[email protected]
3) ATC - West Esskay Services Block No-801-802, B Wing Techno City Plot No. X-4/1 & X-4/2 TTC Inductrial Area, Mahape Navi Mumbai-460710 Contact: Ms. Priyanka Phone: 022-27882881 Email:
[email protected]
5) ATC - East Esskay Services G-09, Matrix Tower, Plot#24, Block DN Sector-5, Salt Lake City Kolkata-700091 Contact: Ms. Priyanka Phone: 033-40044078 Email:
[email protected]
2) ATC - South Karunya University Karunya Nagar Coimbatore-641114 Contact: Dr. Suresh Kumar Phone: 09487846530 Email:
[email protected]
4) ATC - North Industrial Automation Training Centre 178, Phase II, Industrial Area, Panchakula-134113 HARYANA, Contact : Ms. Jyoti Bharti, Tel: 0172-5044417 Contact : Ms. Jyoti Bharti, Tel: 0172-5044417 Email:
[email protected]
6) ATC - Central City: Nagpur (Detail-address will be announced soon)
7) Siemens Machine Tools Drives Training Eklavya Learning Centre 2nd Floor, Du Parc Trinity (Next to Big-Kids Kemp No-17, M.G. Road, Bangalore-560001 Tel: 080 67891665, Contact: Ms. Vidya Balakrishna Contact: Ms. Vidya Balakrishna Email:
[email protected] All the transactions for Industry or Colleges (mainly commercial transactions) like Training Order, Payment should be done necessarily through your nearest Siemens Regional (Sales or Service) Office only. You may contact us here at KALWA Training Centre or Bangalore Training Centre directly, for respective general / technical information (for e.g. course content, address/location etc.)
© Siemens Ltd., 2010