PROFIBUS DP V1 Master Class 1 & Class 2 TCSEGPA23F14F. ○ Din rail IP20
Modbus TCP to PROFIBUS gateway. ○ Master DTM for UNITY V5.0 / Com DTM
...
Flash News:
Launch of PROFIBUS DP V1 Master Interface module for Modicon PAC Platform …………………………………………………………………………………………………………………………
Offer Description This module allows connecting the Quantum, Premium and M340 PACs to PROFIBUS DP V1 (and/or PA via an external gateway). A specific communication DTM is also part of the delivery, in order to allow FDT compliant Asset management tools to access the PROFIBUS Devices directly from Ethernet. Profibus PRM offer Main characteristics PROFIBUS DP V1 Master Class 1 & Class 2 TCSEGPA23F14F ●
Din rail IP20 Modbus TCP to PROFIBUS gateway
●
Master DTM for UNITY V5.0 / Com DTM for third party FDT
●
Same I/O capacity than the Ethernet I/O scanner (2KW in/ 2KW out)
●
Certified by PROFIBUS International and FDT Group
●
SubD 9 pts female connector.
●
Isolated RS485 Interface.
●
Supported throughputs: from 9.6 Kbd to 12 Mbd (standard EN50170 and IEC61158).
●
Diagnostic by leds on the front panel.
●
External 24V power supply.
●
Standard version: 0° to 60°.
●
Harsh version: Extended temperature (-25° to +70°) and coated.
PROFIBUS Services: ●
Support of 125 slaves.
●
Acyclic communication (Read / Write) in Class 1 or Class 2.
●
Sync & Freeze.
●
Extended Diagnostic.
●
Max capacity (cyclical variables): 2KW IN / 2 KW OUT
●
Several PRMs can be connected on the same PLC Ethernet port, assuming that the capacity of the I/O scanner itself is not over passed.
●
Configuration integrated in UNITY V5.0 based on the Device DTMs or the GSD files.
●
PLC I/O Scanner lines automatically configured in Unity Pro to scan the PRM process image.
●
Ready-to-use structured variables automatically created in Unity Pro for the Profibus devices.
●
Configuration saved as part of the Unity Pro application.
●
Certifications CE, UL, CSA, C-TICK, merchant navy.
PRM Com DTM
UNITY V5.0
Ethernet
PRM master DTM
PRM
DP Class 1 Profibus DP
I n
Profibus PA
Customer benefits ● Only one product for all the PLCs supported by UNITY Pro. UNITY performs necessary adaptations that are specific to each platform: alignment, parameters of the I/O scanner, DFBs, etc… ●
Complete diagnostic of the architecture from UNITY, up to the PROFIBUS slave.
●
An offer opened to third party asset management tools based on FDT/DTM.
●
The offer allows to adapt the network topology to the length constraints that are linked to PROFIBUS (mainly PA) by positioning the PRM at the nearest of the process.
●
PRM is compatible with HSBY architectures.
●
Simplified configuration thanks to the auto-scan.
Reduced recovery time in case of failure: ●
In the case of a PRM default, and change for a new product, the FDR function allows to recover the previous configuration and to restart automatically.
●
In the case or a device default, and change for a new product, the initial communication parameters are automatically re-transferred in the new device from the PRM.
For more info on the offer, Pls. visit: http://sopna01.aut.schneiderelectric.com/launch/ProfibusRemoteMaster.nsf/PlanetFrameSetHP?ReadForm&L=Us&
Flash News:
Launch of the next generation Ethernet communication modules for Modicon PAC Platform: “First of its kind in the market”
1 40 NOC 7 71 01 TSX ETC 1 01
BMX NOC 04 01
…………………………………………………………………………………………………………………………
Offer Composition
140 NOC 771 01
Quantum EtherNet/IP communications module
TSX ETC 101
Premium EtherNet/IP communications module
BMX NOC 04 01
M340 EtherNet/IP communications module
Unity Pro V5.0
Unity Pro version 5.0 is required
Ethernet Configuration Tool
Master DTM and extras delivered in a CD with each module
Ethernet, multiple protocols Flexibility, freedom to choose best protocol for application
PLC, one network Efficiency, lower Cost of Ownership
Programming software Consistency, ease of support
Common configuration environment Simplicity, fast configuration, extensive diagnostics
Policy: standard Ethernet Openness, transparency, performance
Product Introduction
EtherNet/IP Modules A single module for all communications • Modbus TCP devices • EtherNet/IP devices • Peer to Peer exchanges • HMI • SCADA A single programming environment • Unity Pro v5.0 • Configure module, network, and devices A truly transparent network architecture • Seamless support of Modbus TCP and EtherNet/IP devices • Easy integration of 3rd party devices and PLCs in the network • Broader access to diagnostic information
Key Features & Benefits
Protocol convergence Configure, control, monitor, and diagnose Modbus TCP and EtherNet/IP devices simultaneously on the same Ethernet network Expanded communication Capacity Perform more transactions per second than legacy products or the competition • •
Expand network capacity with the addition of a single EtherNet/IP module for all needs. Conserve energy by getting the most of your existing PLC before expanding
with another rack Ring architectures for I/O Use the M340 NOC to construct redundant I/O topologies, such as Daisy Chain Loops or Rings, to ensure consistent delivery of I/O data • • •
Reduce solution cost by minimizing the cable requirements and the number of switches in the network Self-healing I/O rings help minimize downtime, allowing the network to operate continuously Diminish the risk of broadcast storms damaging end devices, thanks to RSTP
DTM-based configuration utility Configure communications and diagnose any device, including those from 3rd parties, using Unity Pro, regardless of protocol • • •
Product Functionality
Simplify training requirements by using a single configuration software: Unity Pro Obtain a comprehensive view of the network and the status of all devices at a single glance Diagnose communication problems faster and establish the status of all devices with a single click
I/O Communications • • •
Modbus TCP: Server and Client functionality EtherNet/IP: o Full support of CIP Implicit Messaging functions as a Scanner o Support of CIP Implicit Messaging as an Adapter Compatibility with any ODVA compliant device.
Messaging Communications • •
Modbus TCP: Messaging Server and Client functionality EtherNet/IP: CIP Explicit Messaging Server and Client functionality
PLC Integration • •
PLC programming available through new modules Modules per PLC o Quantum: up to 6 communication modules per PLC o Premium: up to 4 communication modules per PLC o M340: up to 2 communication modules per PLC
Peer-to-Peer Communications EtherNet/IP modules can present themselves as EtherNet/IP adapters (slaves) to other PLCs. Data exchange can take place using standard I/O communications (e.g. Implicit Messaging).
HMI HMI communications possible with both EtherNet/IP and Modbus TCP messaging.
SCADA Modbus Server and OFS supported
Basic Architecture
1
5
6
1. Quantum, Premium or M340 PLC with new Ethernet communications module
PLC
PLC
2. PC running Unity Pro v5.0
SCAD A 7
3. Modbus TCP devices 4. EtherNet/IP devices
2
5. & 6. Additional PLCs
9
6. SCADA system 8
4
3
7. HMI device
HMI
8. ConneXium switches Modbus TCP
EtherNet/IP
Devices
Devices
:Schneider Electric equipment
: Third party equipment
Flash News:
Launch of the RTU module in Modicon M340 PAC platform providing built-in DNP3.0 & IEC 608750 protocols
…………………………………………………………………………………………………………………………
OBJECTIVE: The main objectives of this new offer summarized as below:
Put on the market a cost effective modular RTU offer based on a durable PLC platform targeting mainly Water and Oil & Gas applications
Launch a Schneider offer for RTU based on the Modicon M340 PAC platform
Fill the gap in the Schneider modular RTU offer
Boost Business Growth in WWW and O&G markets
Current offer: This new offer is intended to improve our current RTU offer in the PLC based modular RTU segment for customers looking for a more integrated and cost effective solution when higher processing capabilities are required no more relying on RTU gateways or partner products
New offer: This new modular RTU offer relies on an in-rack M340 module providing RTU protocols (DNP3, IEC60870-5) built-in the Modicon M340 PAC
Customer values:
Offer Simplification: Easy to use Integrated RTU offer: an in-rack RTU module for Modicon M340 PAC
a Cost effective modular RTU offer based on a durable PLC platform
Built-in RTU protocols (IEC 60870-5 101/104, DNP3) directly at PLC level allowing direct connectivity with Telemetry SCADA
Modicon M340 for RTU and Telemetry applications Modicon M340 PAC offers extensive features and modularity suitable for RTU & Telemetry applications •
In-rack RTU module with support of IEC60870-5-101 / 104 and DNP3 protocols
•
Full range of CPU and IO modules for Operations in extended temperature range & Harsh environment (Conformal Coating)
•
Specialized Functions blocks (flow calculations, AGA FBs, AGA 3-7, 8, 9-5 and 11)
•
Expandable rack-based modular I/O configurations and Remote I/O capabilities
•
Serial and Ethernet Communication Ports built-in CPU and modules
•
Support of Modbus, Modbus TCP, CanOpen, ASi interface and Ethernet IP networks
M340 RTU Application targets The main targets are Water / Waste Water and Oil and Gas applications but the offer can also well fit in any other infrastructures such as Power, Hydro Power, Transportation, utilities where RTU protocols builtin a PLC are required along with high level of processing capabilities as opposed to compact RTU systems.
Hardware characteristics ● ● ● ● ●
Extended Temperature: -25°C to- +70°C in operation Conformal coating for Harsh environment 2 ports: 1 Ethernet port (RJ45), 1 Serial port (RJ45, RS232/485) Management of external modems (PSTN, GSM /GPRS, Radio) HW Configuration taken into account in Unity Pro V5.0 Up to 2 modules in total per M340 rack configuration (for all M340 CPU type)
SD card slot: 128 MB for Data Logging csv files & Web pages
1 Ethernet port DNP3 IP, IEC 104, Modbus TCP
1 Serial port DNP3 serial, IEC 101, External Modems management
BMXNOR0200H RTU features:
RTU communications on Ethernet port or Serial port: • • •
As Server or Slave: Upstream communication with the SCADA As Master: Downstream communication with field devices and other stations Remote Access for Unity Pro and remote monitoring / diagnostic (over IP)
Built-in Protocols • • • • •
DNP3 serial – Master or Slave DNP3 IP – Client or Server IEC 60870-5-101(over serial) – Master or Slave IEC 60870-5-104 (over IP) – Client or Server Modbus TCP – Client and Server
Built-in Functions • • •
Data logging with Time stamping inside module SD card Email / SMS for Alarm and report notifications Web server for RTU Protocols setup, diagnostic and monitoring
