rated breakers for each circuit. • Programming stored in non-volatile memory. •
Individually replaceable relays with Variable. Relay Timing Technology.
iLumin
Technical Data
SC-RPB – Universal Source Controllers – with Circuit Breakers Catalog#
Prepared by
Project
Date
Comments
Type
Overview The Switched Relay Controllers with circuit breakers are scalable to any size application. The LCD graphical user interface and keypad permit programming and monitoring for complete system control and integration. Each Switched Relay Controller can control up to 48 relays per panel with two discrete inputs for use with occupancy sensors or other input devices. The Switch Relay Controller family can be networked with other iLumin Source Controllers to provide both architectural and non-dimmed control. Each Switched Relay Controller includes fully populated SWD rated 20 Amp circuit breakers. Each panel has an onboard Ethernet and RS485 ports that may be used for ASCII integration to A/V or other third party systems, a DMX interface for complete system integration and optional support for up to 24, 0-10V dimming outputs. Variable Relay Timing Technology automatically senses the optimal time to switch lighting loads, based on the load attached to each output. This not only extends the life of the relays but also reduces the switching impact on the connected loads. Each output provides real-time Power Metering data available from both the LCD graphical user interface and via the Ethernet port.
Features Integrated circuit breakers and relays in a single, space saving enclosure Real-time power metering Single or three phase versions Continuous duty, thermal magnetic SWD rated breakers for each circuit Programming stored in non-volatile memory Individually replaceable relays with Variable Relay Timing Technology RoHS compliant Up to 24, 0-10V Dimming channels (optional) 30 Amp relays used on all 20A relay cards to extend relay life Control receptacle loads with Latching Relay
SC-RPB – Universal Source Controllers – with Circuit Breakers July 2015
Dimensions
Mechanical
Wall mounted design Surface, enclosures Integral 20A breakers Low voltage input connections Main Lug Bottom Feed An LCD graphical user interface and keypad for ease of programming and configuration. The interface can be used for programming single area systems there is no need to use a PC. The GUI also allows programming of the astronomical timeclock. All SC-RPB Source Controllers have RS485 and UDP over Ethernet connections to allow for control by third party systems (Building Management System, Audio/Visual, etc.) through the use of open protocol ASCII message commands Two contact closure inputs for integration with auxiliary equipment and emergency lighting input DMX512 input for control by entertainment systems Power metering information is available via UDP over Ethernet through the use of open protocol ASCII message commands
Programming
Interfacing
(Inches/mm) SC-RPB 18: 54”H X 24”W X 6”D (up to 18 relays) SC-RPB 30: 76”H X 24”W X 6”D (up to 36 relays) SC-RPB 42: 90”H X 24”W X 6”D (up to 48 relays)
24 in. (609.6 mm)
6 in. (152.4 mm)
54 in. (1371.6 mm)
Features
24 in. (609.6 mm) 24 in. (609.6 mm)
Standards
6 in. (152.4 mm)
24 in. (609.6 mm)
Relay Ratings (All relay’s have a 25KA SCCR at 277 VAC)
Latching Relay Ratings:
6 in. (152.4 mm)
54 in. (1371.6 mm)
Up to 24, 0-10V Dimming channels (optional) − Each 0-10V output supports up to 50 ballasts/drivers that draw the standard 2mA each
76 in. (1676.4 mm)
Non-dim (Switched)
90 in. (2286.0 mm)
Load Types
20A, incandescent 120 VAC 20A, ballast 277 VAC 20A, ballast 347 VAC Maximum wire size: 8 AWG
24 in. (609.6 mm)
1HP @ 120 VAC, 2HP @ 277 VAC 24 in. (609.6 mm)
Two Pole Relay Ratings:
6 in. (152.4 mm)
Normally open 20A, ballast 480 VAC
2
www.eaton.com/lightingsystems
90 in. (2286.0 mm)
1HP @ 120 VAC, 2HP @ 277 VAC
76 in. (1676.4 mm)
Maximum wire size: 8 AWG
6 in. (152.4 mm)
(1
SC-RPB – Universal Source Controllers – with Circuit Breakers July 2015
Wiring Diagram Latching Relay Receptacle Control
Low voltage connections for iCANnet, DMX512, RS485, Ethernet, Contact Closures, 0-10V Dimming come into the center top section of the enclosure Relay connections to lighting loads (conduit may enter through side or side top of the enclosure)
Branch Circuit Breaker feeds to relays Branch Circuit Breaker direct feed to loads not controlled by relays in the enclosure Main Breaker feeds to the Main Lugs
Sample System Topology
www.eaton.com/lightingsystems
3
SC-RPB – Universal Source Controllers – with Circuit Breakers July 2015
Ordering SC - 120 - 18 - RPB - 1P - ML - 20 - S - 12 - 3 - HF1 Product
Interior Options
SC = Source Controller
0 = 0, 0-10V Dimming Channels (18, 36, 48) HF1 = 12, 0-10V Dimming Channels (18, 36, 48) HF2 = 24, 0-10V Dimming Channels (36, 48)
Voltage 120V, 277V, 347V
Number of Two Pole Relays (Two Pole Relays count as 2, Single Pole Relays)
Number of Circuits
0-8 = 18 Size 0-18 = 36 Size 0-24 = 48 Size
18, 36, 48 Source Controller Type RPB = Relay Panel with Breakers
Number of Single Pole Relays 0-18 = 18 Size 0-36 = 36 Size 0-48 = 48 Size
Phase 1P = Single Phase (18 Size Only) 3P = Three Phase
Enclosure/Interior Options
Panel Feed
S
ML = Main Lugs
= Surface
Branch Breaker Rating (Amps) 20 = 20 Amps
18 Relay
SC120V-18-RPB-3P-ML-20-S-18-0-0 SC277V-18-RPB-3P-ML-20-S-18-0-0 SC347V-18-RPB-3P-ML-20-S-18-0-0
Switched Relay Controller with 18 - 20A 120V breakers, 3P - 250A Main Lugs and 18 latching relays Switched Relay Controller with 18 - 20A 277V breakers, 3P - 250A Main Lugs and 18 latching relays Switched Relay Controller with 18 - 20A 347V breakers, 3P - 400A Main Lugs and 18 latching relays
36 Relay
SC120V-30-RPB-3P-ML-20-S-36-0-0 SC277V-30-RPB-3P-ML-20-S-36-0-0 SC347V-30-RPB-3P-ML-20-S-36-0-0
Switched Relay Controller with 30 - 20A 120V breakers, 3P - 250A Main Lugs and 36 latching relays Switched Relay Controller with 30 - 20A 277V breakers, 3P - 250A Main Lugs and 36 latching relays Switched Relay Controller with 30 - 20A 347V breakers, 3P - 400A Main Lugs and 36 latching relays
48 Relay
SC120V-42-RPB-3P-ML-20-S-48-0-0 SC277V-42-RPB-3P-ML-20-S-48-0-0 SC347V-42-RPB-3P-ML-20-S-48-0-0
Switched Relay Controller with 42 - 20A 120V breakers, 3P - 400A Main Lugs and 48 latching relays Switched Relay Controller with 42 - 20A 277V breakers, 3P - 400A Main Lugs and 48 latching relays Switched Relay Controller with 42 - 20A 347V breakers, 3P - 400A Main Lugs and 48 latching relays
SC-RP Additional Components
iBarrier HF1 HF2
Individual Relay Barrier, Voltage and Power Source Separation Field Installable, 12, 0-10V Dimming Channels (Only supported in the 18, 36 & 48 size panels) Field Installable, 24, 0-10V Dimming Channels (Only supported in the 36 & 48 size panels)
Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton Lighting systems 203 Cooper Circle Peachtree City, GA 30269 www.eaton.com/lightingsystems © 2015 Eaton All Rights Reserved Printed in USA Publication No. TD503025EN July 10, 2015
Eaton is a registered trademark. All other trademarks are property of their respective owners.
