Skidders - US Forest Service

I N D E X SKIDDERS Wheeled Allied Systems

SKIDDERS

CAT 515 CAT 525B CAT 535B CAT 545 Franklin S2 Grapple Franklin Q70 Grapple Franklin Q-80 Grapple Franklin Q88 M-56 Grapple Franklin Q90 Grapple Franklin S2 Cable Franklin Q70 Cable Franklin Q90 Cable Franklin Q80 Cable Franklin 185 S2 Cable John Deere 540G / 640G John Deere 548G / 648G / 748G Morgan SX-704 SB Morgan SX-706 DF Prentice 490 Tigercat 620 Tigercat 630B Tigercat 635 Timbco TS820-D Arch Grapple Timbco TS820-D Clam Bunk Timberjack 240C Timberjack 360D Timberjack 360D Single Arch Timberjack 460 Timberjack 460D Dual Arch Timberjack 560D Dual Arch Timberjack 560D Single Arch Timberjack 660D Timberjack 660D Dual Arch Timberpro TF820 “E” Series Clam Bunk Timberpro TS820 “E” Series Clam Bunk Trans-Gesco TG88C

I N D E X

SKIDDERS

Tracked CAT 517 CAT 527 Jonsered KMC Utility Carrier KMC Extendable Choker Arch KMC Single Arch or Dual Function Grapple KMC Swing Grapple SC UTV International Smart Vehicle SV-125

Attachments Botex Brave Products Future Forestry Products

Allied Systems Company - Ranger Skidder

http://www.alliedsystems.com/ranger/skidder.htm

For 30 years, Ranger has been the leader in the development of skidders that meet the real logger's need for simplicity and reliability. Components are typically more robust than the competition. This means durability and better resale value. Competitors often adapt general-purpose components for use on their skidders. Not Ranger. Ranger's Clark torque converters and transmissions, drivelines and, differentials, axles and final drives are configured specifically for skidders. Some key specifications for the Ranger Skidder: Head-to-toe keel-shaped belly guard Dependable Cummins engine Protected blade cylinders On-the-go differential lock Reliable Clark powershift transmission Rugged large-drum capacity winch; OR 360-degree grapple rotation head

Ranger Cable Skidder Specifications

http://www.alliedsystems.com/ranger/cablespecs1.htm

Ranger Cable Skidder Specifications POWER UNIT

F65C

H66DSC-II

H67C-II

F68C

Engine Make

Cummins

Cummins

Cummins

Cummins

Model

4BTA 3.9

6BTA 5.9

6BTA 5.9

6CTA 8.3

Maximum Rating

116 Hp (86.5 kW)

174 Hp (130 kW)

185 Hp (138 kW)

230 Hp (171 kW)

Flywheel Rating

104 Hp (77.6 kW)

159 Hp (118 kW)

170 Hp (126 kW)

211 Hp (158 kW)

Governed RPM

40 gal (152 L)

74 gal (280 L)

74 gal (280 L)

84 gal (318 L)

Cooling System

7.5 gal (28 L)

10 gal (38 L)

10 gal (38 L)

10.2 gal (39 L)

Engine Lubrication Including Filter

2.4 gal (9.1 L)

3.6 gal (14 L)

3.6 gal (14 L)

5.9 gal (22 L)

Hydraulic Reservoir

17 gal (63 L)

14 gal (53 L)

14 gal (53 L)

17 gal (64 L)

OPERATING WEIGHT

F65C

H66DSC-II

H67C-II

F68C

Front Axle

10,150 lbs (4,604 kg)

15,200 lbs (6,895 kg)

15,210 lbs (6,900 kg)

21,100 lbs (9,571 kg)

Rear Axle

7,250 lbs (3,289 kg)

8,000 lbs (3,629 kg)

9,690 lbs (4,396 kg)

12,300 lbs (5,580 kg)

Total

17,400 lbs (7,893 kg)

23,200 lbs (10,524 kg)

24,900 lbs (11,295 kg)

33,400 lbs (15,151 kg)

Ranger Grapple Skidder Specifications

1 of 2

http://www.alliedsystems.com/ranger/grapplespecs1.htm

Ranger Grapple Skidder Specifications POWER UNIT

F65G

H66DS-II

H67G-II

F68G

Engine Make

Cummins

Cummins

Cummins

Cummins

Model

4BTA 3.9

6BTA 5.9

6BTA 5.9

6CTA 8.3

Maximum Rating

116 Hp (86.5 kW)

174 Hp (130 kW)

185 Hp (138 kW)

230 Hp (171 kW)

Flywheel Rating

104 Hp (77.6 kW)

159 Hp (118 kW)

170 Hp (126 kW)

211 Hp (158 kW)

Governed RPM

2500

2500

2500

2200

Maximum Torque

298 ft-lb (404 N-m)

447 ft-lb (605 N-m)

550 ft-lb (748 N-m)

632 ft-lb (857 N-m)

Cylinders

4

6

6

6

Displacement

239 cu in (3.9 L)

359 cu in (5.88 L)

359 cu in (5.88 L)

504.5 cu in (8.26 L)

Electrical System

12 V, 65 A

24 V, 70 A

24 V, 70 A

12 V, 65 A

DRIVE TRAIN

F65G

H66DS-II

H67G-II

F68G

Torque Converter

Clark

Clark

Clark

Clark

Transmission

Clark 18,000

Clark 32,000

Clark 32,000

Clark 32,000

1

2.6 mph (4.2 km/h)

3.6 mph (5.8 km/h)

3.5 mph (5.6 km/h)

4.3 mph (7.0 km/h)

2

5.3 mph (8.5 km/h)

6.8 mph (10.9 km/h)

6.9 mph (11.1 km/h)

8.3 mph (13.5 km/h)

3

12.1 mph (19.5 km/h)

13.6 mph (21.9 km/h)

14 mph (22.5 km/h)

16.7 mph (26.9 km/h)

Travel Speeds

BRAKES

F65G

H66DS-II

H67G-II

F68G

Service Brakes

Clark, Multi-Disc, Oil-Cooled




Secondary Brakes

Rear Axle, Multi-Disc, Oil-Cooled

Front Axle Disc

Rear Axle, Multi-Disc, Oil Cooled

Mid-Mount

Parking Brake

Lever Actuated

Lever Actuated

Lever Actuated

Lever Actuated

HYDRAULIC SYSTEM Pump

F65G

H66DS-II

H67G-II

F68G

Gear Type

Gear Type

Gear Type

Gear Type

29.8 gpm (112 L/min)

36.8 gpm (139 L/min)

36.8 gpm (139 L/min)

52 gpm (196 L/min)

2,200 psi (15,000 kPa)

2,750 psi (19,000 kPa)

2,750 psi (19,000 kPa)

2,100 psi (14,500 kPa)

Maximum Rated Flow @ Governed RPM

Pressure

WINCH

F65G

Winch Model

H66DS-II

H67G-II

F68G

W3C

W3C

W3C

WD 411-5

5/8 in (15 mm)

227 ft (69 m)

227 ft (69 m)

227 ft (69 m)

N/A

3/4 in (19 mm)

160 ft (49 m)

160 ft (49 m)

160 ft (49 m)

216 ft (66 m)

1 in (25 mm)

N/A

N/A

N/A

92 ft (28 m)

Maximum Line Pull

31,432 lbs (14,258 kg)

43,750 lbs (19,846 kg)

52,000 lbs (23,588 kg)

39,900 lbs (18,099 kg)

Maximum Line Speed (Bare Drum)

292 ft/min (89 m/min)




Cable Capacity

FLUID CAPACITIES

F65G

H66DS-II

H67G-II

F68G

11/18/02 9:00 AM

Ranger Grapple Skidder Specifications

http://www.alliedsystems.com/ranger/grapplespecs1.htm

Fuel Tank

40 gal (152 L)

67 gal (254 L)

92 gal (348 L)

84 gal (318 L)

Cooling System

7.5 gal (28 L)

10 gal (38 L)

10 gal (38 L)

10.2 gal (39 L)

Engine Lubrication Including Filter

2.4 gal (9.1 L)

3.6 gal (14 L)

3.6 gal (14 L)

5.9 gal (22 L)

Hydraulic Reservoir

16.6 gal (63 L)

14 gal (53 L)

14 gal (53 L)

17 gal (64 L)

OPERATING WEIGHT

F65G

H66DS-II

H67G-II

F68G

SINGLE-ARCH

SINGLE ARCH

PARALLELOGRAM

PARALLELOGRAM

Front Axle

9,450 lbs (4,287 kg)

15,500 lbs (7,031 kg)

15,650 lbs (7,699 kg)

19,540 lbs (8,964 kg)

Rear Axle

9,950 lbs (4,514 kg)

10,030 lbs (4,550 kg)

15,200 lbs (6,895 kg)

19,060 lbs (8,646 kg)

Total

19,400 lbs (8,800 kg)

25,530 lbs (11,581 kg)

30,850 lbs (13,994 kg)

38,600 lbs (17,610 kg)

OPERATING WEIGHT

H66DS-II

H67G-II

HI-VIS

HI-VIS

Front Axle

13,540 lbs (6,142 kg)

15,650 lbs (7,099 kg)

Rear Axle

12,900 lbs (5,852 kg)

14,900 lbs (6,758 kg)

Total

26,440 lbs (11,994 kg)

30,550 lbs (13,859 kg)

TS820-D Arch Grapple Arch Grapple Area 25 ft.2 (2,32 m2)

67” (170 cm)

14” (36 cm) 188” (478 cm) 26’9” (8,15 m)

“D” Model Improvements & Features • Short center-to-center axle design for better maneuverability and smaller turning diameter. • Bronze tint in all cab windows. • High capacity radiator/oil cooler design for maximum cooling.

12’0” (3,66 m)

• Fuel tank below rotation for easier refueling. • 6-section main control valve is located behind operator’s cab. Centralized hydraulic pressure check. • Pump drive speed increaser allows lower engine RPM for fuel efficiency and noise reduction. • Set back center of rotation and wheel drive motors moved to rear frame for better weight distribution.

64” (163 cm) 22” (56 cm)

28” (71 cm) 28” (71 cm)

*10’10” (3,30 m)

Axle Weight - Front ........................ 30,240 lb. (13 716 kg) Axle Weight - Rear ............................ 21,520 lb. (9 760 kg) Base Machine Weight .................... 51,760 lb. (23 476 kg) Approximate “woods ready operating weight, fully serviced including 1/2 full fuel tank [55 gal. (208 litres) @ 451 lb. (186 kg)} and 175 lb. (80 kg) operator.

12’9” (3,89 m)

Axle C/L

98” (249 cm)

*9’7” (2,92 m) with rim dish turned in.

P.O. Box 516 • 1075 Airport Drive • Shawano,WI 54166

TS820-D Arch Grapple Standard Equipment

Optional Equipment • 4 different wheel combinations including a dual wheel configuration.

• N.A.F. gear drive dual bogie axles with differential lock, Firestone 28L-26/14 ply tires, and 40,000 lb. (18 144 kg) capacity.

• Fire Suppression system. • Superior custom designed gearbox. • Cold weather starting aids. • Hydrostatic wheel drive with a Rexroth 125cc 80 gpm (303 litres) pump and Rexroth A6VM160 2-speed auto-shift drive motors with 53,795 lb. (24 401 kg) drawbar pull and 0-9.0 mph (14.48 km/h) travel speed.

• Heavy-duty frame lock brake caliper. • Extended machine warranty.

• Cummins C8.3-C 260HP (193 kW) Elite engine with 130 Amp alternator. • Rexroth AA11V095 62 gpm (235 litres) implement pump and 6-section VOAC LS90 main control valve. • 25 ft2. (2,32 m2) capacity arch grapple. • Excellent component accessibility for easy service and maintenance. • Strongest, safest cab in the industry with full ROPS/FOPS/OPS certification, excellent visibility, 3 emergency escapes, and rubber isolator mounted for sound suppression. Other features include a Red Dot air conditioner and heater, AM/FM radio with cassette, and full halogen lighting package.

Sold and Serviced By:

• 109 gal. (412 litres) fuel capacity.

Ground Pressures Front Axle Empty / Max. Load Firestone 28L-26 (Standard) .................. 8.19 psi / 8.19 psi Firestone 28L-26 & 23.1 Dual ................ 4.70 psi / 4.70 psi Firestone 700/50-26.5........................ 12.85 psi / 12.85 psi Nokian 750/55-26.5 .............................. 9.99 psi / 9.99 psi Firestone 54 x 37 .................................. 7.75 psi / 7.75 psi

Rear Axle Empty / Max. Load

Front Axle w/Tracks Empty / Max. Load

Rear Axle w/Tracks Empty / Max. Load

.................... 5.82 psi / 11.24 psi ...................... 5.68 psi / 5.68 psi ...................... 3.94 psi / 7.50 psi ...................... 4.16 psi / 7.16 psi ............................................ - - - ............................................ - - .................. 11.16 psi / 20.61 psi ...................... 6.39 psi / 6.39 psi ...................... 5.65 psi / 9.75 psi .................... 8.70 psi / 15.89 psi ...................... 6.30 psi / 6.30 psi ...................... 4.92 psi / 8.35 psi .................... 6.78 psi / 12.21 psi ............................................ - - - ............................................ - - -


TS820-D Clam Bunk

Clam Bunk Capacity 32 ft.2 (2,97 m2)

67” (170 cm)

14” (36 cm) 188” (478 cm) 26’9” (8,15 m) 8’9” (23 cm)

“D” Model Improvements & Features • Short center-to-center axle design for better maneuverability and smaller turning diameter. • “Clear-view” cab design for better visibility of load in the air. • Bronze tint in all cab windows. 12’0” (3,66 m)

• High capacity radiator/oil cooler design for maximum cooling. • Thicker and rounded clam bunk arm tips for greater durability. • Heavy-duty frame lock caliper brake. • Fuel tank below rotation for easier refueling. • 6-section main control valve is located behind operator’s cab. Centralized hydraulic pressure checks. • Pump drive speed increaser allows lower engine RPM for fuel efficiency and noise reduction. • Set back center of rotation and wheel drive motors moved to rear frame for better weight distribution.

Lift Capacities Radius 10’ (3,05 m) 15’ (4,57 m) 20’ (6,10 m) 25’ (7,62 m)

(w/Hultdin’s 360S grapple)

Lift Capacity .................................... 9,600 lb. (4 355 kg) .................................... 6,700 lb. (3 039 kg) .................................... 5,000 lb. (2 268 kg) .................................... 3,100 lb. (1 406 kg)

*9’7” (2,92 m) with rim dish turned in.

64” (163 cm) 22” (56 cm)

28” (71 cm) 28” (71 cm)

*10’10” (3,30 m)

Axle Weight - Front ........................ 35,540 lb. (16 119 kg) Axle Weight - Rear ............................ 16,200 lb. (7 348 kg) Base Machine Weight .................... 51,740 lb. (23 467 kg) Approximate “woods ready operating weight, fully serviced including 1/2 full fuel tank [55 gal. (208 litres) @ 451 lb. (186 kg)} and 175 lb. (80 kg) operator).

Lift capacities shown are with a Hultdins Supergrip 360S grapple with GV17US indexator [800 lb. (363 kg)].


TS820-D Clam Bunk Standard Equipment

Optional Equipment • 4 different wheel combinations including a dual wheel configuration.

• N.A.F. gear drive dual bogie axles with differential lock, Firestone 28L-26/14 ply tires, and 40,000 lb. (18 144 kg) capacity.

• Several different grapple/grapple saw configurations including Hultdin’s Supergrip 360S or 520S with GV17US rotator and Supergrip TL430 with R10 rotator.

• Superior custom designed gearbox. • Hydrostatic wheel drive with a Rexroth 125cc 80 gpm (303 litres) pump and Rexroth A6VM160 2-speed auto-shift drive motors with 53,715 lb. (24 401 kg) drawbar pull and 0-9.0 mph (14,48 km/h) travel speed.

• Fire Suppression system. • Up to 2 additional auxiliary loader functions. • Cold weather starting aids.

• Cummins C8.3-C 260HP (193 kW) Elite engine with 130 Amp alternator.

• Grapple snubber. • Rexroth AA11V095 62 gpm (235 litres) implement pump and 6-section VOAC LS90 main control valve.

• Stick boom heel

• 32 sq. ft. (2.97 m2) capacity clam bunk.

• Extended machine warranty.

• Excellent component accessibility for easy service and maintenance. • Strongest, safest cab in the industry with full ROPS/FOPS/OPS certification, excellent visibility, 3 emergency escapes, and rubber isolator mounted for sound suppression. Other features include a Red Dot air conditioner and heater, AM/FM radio with cassette, and full halogen lighting package.

Sold and Serviced By:

• 109 gal. (412 litres) fuel capacity.

Ground Pressures Front Axle Empty / Max. Load Firestone 28L-26 (Standard) .................. 9.62 psi / 9.62 psi Firestone 28L-26 & 23.1 Dual ................ 5.78 psi / 5.78 psi Firestone 700/50-26.5........................ 16.24 psi / 16.24 psi Nokian 750/55-26.5 .......................... 15.59 psi / 15.59 psi Firestone 54 x 37-25 .............................. 9.70 psi / 9.70 psi

Rear Axle Empty / Max. Load

Front Axle w/Tracks Empty / Max. Load

Rear Axle w/Tracks Empty / Max. Load

...................... 4.38 psi / 9.80 psi ...................... 6.53 psi / 6.53 psi ...................... 3.40 psi / 6.64 psi ...................... 2.88 psi / 5.88 psi ............................................ - - - ............................................ - - .................... 7.10 psi / 16.55 psi ...................... 7.86 psi / 7.86 psi ...................... 3.90 psi / 8.00 psi .................... 5.61 psi / 12.81 psi ...................... 6.76 psi / 6.76 psi ...................... 3.45 psi / 6.88 psi ...................... 4.45 psi / 9.88 psi ............................................ - - - ............................................ - - -


Timberjack

240C

Cable Skidder

Technical Data Engine

Engine Lubrication

Cylinders Displacement

Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

Cummins 4BTA 4 litres 3.9 cu.in. 239 Maximum power* kW 87 hp 116 Flywheel power* kW 75 hp 102 Maximum torque* Nm 400 lb.-ft. 297 Governed rpm 2200 *Engine performance per SAE test criteria/conditions

Electrical System 12 volt 105 amp alternator Batteries - 2 x12 volt, 750 CCA 180 ah each Electrical cut-off in cab

Fuel System Air Cleaner Dry type, 2 stage, Evacuator valve Pre-cleaner, optional

Fuel capacity - 113 litres (30 usg) Water separator standard

Transmission Cooling System 8 row, inline, 3 pass radiator Fan side has steel reinforced copper fins System pressure 103 kPa (15 psi) Steel surge tank

Fan Blower type,10 Blade

Standard Shift 4 speeds Stick shift control Transfer Case Timberjack designed and built 2 speed reversing Manual lever/cable operated from cab

240C

Timberjack Cable Skidder Axles

Hydraulic System

Heavy duty outboard planetary type Front - NoSpin auto engagement Rear - lockable differential

Pump Main pump - open center, constant displacement, gear type Flow 100 lpm (25.1 gpm) Pressure 17 125 Pa (2,500 psi)

Steering Frame articulation +/- 45 degrees

Auxilliary pump - open center, gear type Flow 32.4 lpm (8.1 gpm) Pressure 1 711 Pa (250 psi)

Oscillation Front axle +/- 15 degrees

Service Brakes

Hydraulic tank Capacity Pressure

Enclosed dry disc, hydraulic/mechanical Actuation, mounted on transfer case

34 litres 105 kPa

(7.5 usg) (15 psi)

Parking Brake Lever control/cable actuation of service brake

Filter - In tank return filter, bypass type

Travel speeds (Based on standard 23.1-26 tires)

Hydraulic Cylinders

1 2 3 4

F F F F

kph 3.0 5.2 8.6 12.8

/ / / / /

Maximum speeds mph 1.83 1R 3.25 2R 5.39 3R 7.97 4R

kph 3.0 5.2 8.6 12.8

/ / / / /

mph 1.83 3.25 5.39 7.97

T40D Winch Rated Brake Capacity - 178 kN (40,000 lbs.) Rated Line Pull Bare drum 125 kN (28,067 lbs.) Full drum 91 kN (20,583 lbs.) Line speed Bare drum 0-46 m/min (0-153 ft./min) Full drum 0-63 m/min (0-209 ft./min) Drum Diameter - 203 mm (8 in.) Cable Diameter - 16 mm (5/8 in.); 19 mm (3/4 in.) Drum Capacity - 77m (254 ft.); 54m (179 ft.)

Fairlead Assembly Fairlead roller type - Concave shape, induction hardened Diameter Length mm/inch mm/inch 168 / 6.6 284 / 11.2 Vertical rollers 95 / 3.75 443 / 17.5 Horizontal rollers 95 / 3.75 443 / 17.5

Fenders Integral with rear chassis weldment Heavy duty, ‘rolled’ design Designed to provide protection for tires

Bore

Steer (1)

Double acting 114 4.5 Decking Blade (2) Double acting 100 4.0

Rod dia. mm/inches 50 2.0 45 1.75

Stroke 419 16.5 273 11.0

Machine Weight Based on Standard Machine Configuration, as follows: 23.1-26 tires 86" Decking blade Open cab All tanks filled, plus T40D Winch 90Kg (200lb.) operator

Weight distribution Kg lbs. %

Front axle 4 889 10,755 58.0

Rear axle 3 520 7,745 42.0

Total 8 409 18,500

240C

Timberjack Cable Skidder

A= B= C= D=

2 601 mm (102") 2 016 mm (79") 2 375 mm (96") +/- 45°

Tire Size 18.4-34 28L-26 24.5-32 30.5L-32 67/34.00-26

E = 1 647 mm F = 832 mm H = 726 mm J1 = 1 166 mm

2 2 2 3 3

500 800 832 010 211

A mm mm mm mm mm

(65") J2 = 1 478 mm (58") N = (33") K = 848 mm (33") O = (29") L = 2 911 mm (115") P = (46") M = 1 692 mm (67") Q =

(98") (110") (112") (119") (126")

2 2 2 2 2

302 085 210 235 355

B mm mm mm mm mm

(80") (82") (87") (88") (93")

Note: Machine height is approximate. Tire dimensions may vary +/- 50 mm (2"). Dimensions “A” through “Z” are based on 23.1-26 Tires.

2 2 5 3

986 968 258 563

mm mm mm mm

2 2 2 3 2

(118") R = 5 852 mm (230") (117") S1 = 406 mm (16") (207") S2 = 517 mm (20") (140") T = 343 mm (14")

961 926 984 028 954

L mm mm mm mm mm

(117") (115") (118") (119") (116")

615 579 638 681 607

X = 5 750 mm (226") Y = 178 mm (7") Z = 565 mm (22")

Z mm (24") mm (23") mm (25") mm (27") mm (24")

240C

Timberjack Cable Skidder Standard and Optional Equipment Engine Air filter, dry type, two stage with vacuator valve Air intake precleaner Antifreeze-33F (-36C) Blower type cooling fan Coolant Recovery tank Electric Fuel Shutoff, key activated Fuel filters, primary/secondary, spin on type Fuel/water separator, with drain Iso-mounted engine/transmission assemblies Muffler/spark arrestor Oil drain with "Enviro-rite" drain system Oil filter, spin on, vertical mount Oil to coolant type engine oil cooler Padlock ready side panels

•

Electric engine oil pan heater Lights, none Lights, 3 front, 2 rear

■

■

• •• •• • •• • • • • Electrical Alternator, 12 volt, 105 amperes • Batteries, dual, 750 CCA each, 185 ah reserve each • Electric shut off master switch, cab mounted •■ Electric engine block heater

Transmission

• • • • •

Manual Shift 4 speeds synchronized

Axles Heavy duty outboard planetary type Front - NoSpin-auto engagement Rear - Lockable Differential

Brakes Service brakes Single disc type, transfer case mounted Fully enclosed

• •

Parking brake, cable actuated/manually

•■

Standard

•

Optional ■

240C

Timberjack Cable Skidder Standard and Optional Equipment Cab - Standard Fully screened Cab* Tinted Lexan Front Window Washer/Wiper Integral cab with ROPS, OPS, FOPS rating * (except for front window) Front washer/wiper Right half door, opening Adjustable seat with seat belt Dash mounted ignition switch Master Cut off switch, dash mounted Foot operated throttle Foot operated brake Parking brake 5 lb. Fire extinguisher 10 lb. Fire extinguisher

• • • • • • • •• • • • •■

Cab - Optional Enclosed, including the following: Integral cab with ROPS, OPS, FOPS rating Tinted Lexan windows Left opening door, with sliding windows Heater

• • • •

Instrumentation Full gauge/warning package as follows: Engine Hourmeter Meter Engine oil pressure Gauge Engine coolant temperature Gauge Charging system VOH meter Parking brake Light Diff lock on/off Light Back-up alarm

• • • • • • •

Standard

•

Optional ■

Tire Chart Overall Width mm / Inch

Ground Clearance mm / Inch

Ground Pressure Front kPa/psi Rear kPa/psi

18.4-34

2 500 98

570 22.3

62/9.1 44/6.4

23.1-26* (narrow track)

2 590 102

565 22.2

50/7.2 36/5.2

23.1-26 (wide track)

2 873 113.1

565 22.2

50/7.2 36/5.2

28L-26 (narrow track)

2 800 110.2

579 22.8

42/6.0 30/4.4

28L-26 (wide track)

2 928 115.3

579 22.8

42/6.0 30/4.4

24.5-32

2 832 111.5

668 25.1

45/6.6 33/4.8

30.5L-32**

3 010 118.5

681 26.8

38/5.5 28/4.1

67x34.00-26**

3 211 126.4

607 23.9

38/5.5 28/4.1

®Timberjack and the donkey symbol are trade marks of Timberjack. Printed in Canada by BP-10M-2/00

Tire Size

* Standard tire ** Not approved with tire chains • • • •

All dimensions based on unit equipped with Heavy Duty 84" axles. Based on standard equipped machine Narrow track/wide track dimensions refer to reversible rim feature. Footprints or tire contact area from manufacturer's data, at 76 mm (3") penetration.

The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufacturered previously.

www.timberjack.com

Timberjack

360D Cable Skidder


Electrical System

John Deere - 6068T with altitudecompensating, spark-arresting turbocharger Rated power 89kW (119hp) net* 95kW (127 hp) gross* Governed rpm 2 200 rpm Cylinders 6 Displacement 6,8L (414 cu.in.) Max. net torque 39% @ 1 400 rpm 537 Nm (398 lb.ft.) @ 1 400 rpm Fuel consumption 9-14 L/h (2.5 to 3.8 usg/hr.) Air cleaner Dual stage with safety element and dust unloader valve Cooling system Heavy duty radiator with in-line core coolant recovery reservoir Cooling fan - blower Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

12 volt with 65 amp alternator

*Engine performance per SAE test criteria/conditions

Battery (2-12 volt) Reserve capacity: 360 min., 1,850 cca

Transmission Direct drive powershift, planetary Oil filtration-10 micron pressure side with bypass

Axles Final drives-heavy duty planetary, mounted inboard Differentials-hydraulic locking, operated on the go Front axle oscillation - 30 degrees, stop to stop

360D

Timberjack Cable Skidder Steering

Hydraulic System

Frame articulation +/- 45 degrees Orbitrol ™ valve, priority steering control

Pump - variable displacement axial piston Maximum rated flow 102 lpm (27 gpm) @ 2,200 rpm Pressure 20 685 kPa (3,000 psi)

Oscillation

Oil filtration

one 10 micron return oil with bypass

Front axle +/- 15 degrees

Power train performance (with 23.1-26 tires) No tire slip Forward Gear Gear Gear Gear Gear Gear Gear Gear Reverse Gear Gear Gear Gear Gear Gear Gear

maximum speed @ 2,200 rpm

maximum drawbar @ peak torque

1 2 3 4 5 6 7 8

2.3 km/h (1.4 mph) 3.1 km/h (1.9 mph) 4.1 km/h (2.5 mph) 5.4 km/h (3.4 mph) 7.3 km/h (4.5 mph) 9.6 km/h (6.0 mph) 14.3 km/h (8.9 mph) 19.0 km/h (11.8 mph)

175 kN (39,107 lb.) 129 kN (29,457 lb.) 99 kN (22,134 lb.) 75 kN (16,672 lb.) 56 kN (12,480 lb.) 42 kN (9,399 lb.) 28 kN (6,323 lb.) 21 kN (4,764 lb.)

1 2 3 4 5 6 7

2.3 km/h (1.4 mph) 3.1 km/h (1.9 mph) 4.1 km/h (2.5 mph) 5.4 km/h (3.4 mph) 7.3 km/h (4.5 mph) 9.6 km/h (6.0 mph) 14.3 km/h (8.9 mph)

175 kN (39,107 lb.) 132 kN (29,457 lb.) 99 kN (22,134 lb.) 75 kN (16,672 lb.) 56 kN (12,480 lb.) 42 kN (9,399 lb.) 28 kN (6,323 lb.)

Hydraulic oil cooler Air to oil type Filter Spin on return filter Bypass type

Capacities Fuel tank Cooling System Engine lubrication, including filter Transmission Differentials Front Rear Winch Hydraulic reservoir

159.0 L (42.0 US gal) 28.4 L (30.0 US qt.) 18.9 L (20.0 US qt.) 29.3 L (7.8 US gal) 17.0 17.0 35.2 30.3

L L L L

(4.5 (4.5 (9.3 (8.0

US US US US

gal) gal) gal) gal)

Machine Weight Based on Standard Machine Configuration, as follows: 23.1-26 tires Screened cab Winch Weight

Brakes

Ground Pressure Data

Service brakes - long life, inboard-mounted wet disc oil cooled, self adjusting and self-equalizing front and rear axles. Parking brake - automatically spring-applied, hydraulically released, sealed and lubricated, wet multi-disc, integrally mounted in transmission.

Tires 23.1-26 28L-26 24.5-32

Standard decking blade All tanks filled, plus 79kg (175lb.) operator 9,933 kg (21,990 lbs.)

50.7 kPa (7.4 psi) 42.5 kPa (6.2 psi) 46.0 kPa (6.7 psi)

360D


K = Ground Clearance L = Wheel M = Overall Width

Tire - 23.1-26

Turning radius over tires Tire - 28L-26

Turning radius over tires Tire - 24.5-32

Turning radius over tires

K - 498 mm (19.6 in.) L - 2,21 m (7 ft. 3 in.) M - 2,79 m (9 ft. 2 in.) 5,47 m (17 ft. 11 in.) K - 514 mm (20.2 in.) L - 2,29 m (7 ft. 6 in.) M - 3 m (9 ft. 10 in.) 5,51 m (18 ft. 1 in.) K - 598 mm (23.5 in.) L - 2,38 m (7 ft. 9.5 in.) M - 3 m (9 ft. 10 in.) 5,48 m (18 ft. 0 in.)

Tire - 23.1-26 (Narrow gauge)

Turning radius over tires Tire - 28L-26 (Narrow gauge)

Turning radius over tires Tire - 24.5-32 (Narrow gauge)


K - 498 mm (19.6 in.) L - 2,06 m (6 ft. 9 in.) M - 2,64 m (8 ft. 8 in.) 5,33 m (17 ft. 6 in.) K - 514 mm (20.2 in.) L - 2,18 m (7 ft. 2 in.) M - 2,9 m (9 ft. 6 in.) 5,50 m (17 ft. 11 in.) K - 598 mm (23.5 in.) L - 2,15 m (7 ft. 0.5 in.) M - 2,77 m (9 ft. 1 in.) 5,36 m (17 ft. 7 in.)

Winch Type sealed, wet multi-disc clutch and brake pressurized lubrication, single lever control Cable capacity 4000 (203 mm (8 in.) drum) 15.8 mm (0.625 in.) cable 77,4 m (254 ft.) 19.1 mm (0.75 in.) cable 54,6 m (179 ft.) 22.2 mm (0.875 in.) cable 39,3 m (129 ft.) 25.4 mm (1 in.) cable 30,5 m (100 ft.)

4000 (254 mm (10 in.) drum) 60,6 m (199 ft.) 43 m (141 ft.) 30,8 m (101 ft.) 23,8 m (78 ft.)

Linepull @ peak engine and 15,8 mm (0.625 in.) cable 4000 (203 mm (8 in.) drum high speed) 4000 (203 mm (8 in.) drum standard speed) 4000 (254 mm (10 in.) drum high speed) Linespeed @ 2,200 rpm and 15,8 mm (0.625 in.) cable 4000 (203 mm (8 in.) drum high speed) 4000 (203 mm (8 in.) drum standard speed) 4000 (254 mm (10 in.) drum high speed)

full drum 95 kN (21,437 lb.) 111 kN (24,974 lb.) 111 kN (24,974 lb.) full drum 73.8 m/min. (242 fpm) 66.4 m/min. (218 fpm) 63.4 m/min. (208 fpm)

bare drum 155 kN (34,786 lb.) 180 kN (40,525 lb.) 147 kN (32,985 lb.) bare drum 44.5 m/min. (146 fpm) 40.0 m/min. (131 fpm) 47.9 m/min. (157 fpm)

360D


A B B

GROUND LINE

D

F

E

G H

A - Overall Height

3011 mm (9 ft 10.5 in.)

A - Overall Height with Factory-Installed Water Tank 3171 mm (10 ft 4.8 in.) B - Maximum Blade Lift Above Ground C - Maximum Blade Dig Below Ground D - Front Axle to Front of Machine

1220 mm (3 ft 11.6 in.)

C

E - Front Axle to Blade Cutting Edge Arc

2112 mm (6 ft 11.1 in.)

F - Front Axle to Articulation Joint

1575 mm (5 ft 2 in.)

G- Wheelbase

2920 mm (9 ft 7 in.)

H - Overall Length

6330 mm (20 ft 9 in.)

288 mm (11 ft 3 in.)

1507 mm (4 ft 11 in.)

Note: Side view dimensions are for machine equipped with 28L-26 10 PR LS2 tires and adjustable log arch.

360D

Timberjack Cable Skidder Standard and Optional Equipment Engine Antifreeze, -36°C (-33°F) Blower-type cooling fan, enclosed with guard Coolant recovery tank Electric fuel shutoff with start key Fuel filter, vertically mounted, quick release Fuel/water separator, vertically mounted, quick release Isolation-mounted engine Oil drain shutoff for spill-free oil changes Oil filter, spin-on, vertical mount, full flow with bypass Oil-to-coolant engine oil cooler Padlock-ready engine side shields Perforated hood and side shields Side-by-side mounted radiator, transmission, and hydraulic oil cooler Electric ether starting aid

Electrical Alternator, 65 amp Alternator, 95 amp Alternator, 120 amp Battery disconnect Battery, dual, heavy duty, low maintenance Load center electrical system with blade-type fuses Work lights (halogen, 2 front, 2 rear) Work lights (halogen, 4 front, 4 rear)

Transmission Direct drive power shift with eight forward and seven reverse speeds Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator

Axles Differential lock, with switch in shifter knob and indicator on dash Self-contained differential: Lock hydraulic circuit with filter Heavy-duty inboard planetary final drives Inboard sealed and lubricated wet disc brakes, front and rear

• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

• • • • • • • • •

Brakes Service brakes Disc type, mounted inboard of axle final drives, sealed and lubricated, self-adjusting and self-equalizing front and rear Parking brake Spring applied, hydraulically released, wet multi-disc, integrally mounted in transmission

Operator’s Station Accessory power ports (2), 12-volt/15amp fuse Beverage holder Cab hydraulic tilt for service Canopy cab with tinted polycarbonate front windows and screens on all other openings Cab, fully enclosed, with polycarbonate windows on all openings with screens on the door windows only; also included: Air conditioner, R134a refrigerant / Heater, 40,000 Btu/hr. (11.8 kW) / Pressurizer Deluxe interior trim package Dome light Door storage bins Fire extinguisher: 5 lb. 10 lb. Floormat Foot throttle Hand throttle Front wiper with washer Rear wiper with washer Full-function monitor instrumentation with audible warning alarm for: Air filter restriction indicator / Alternator voltage / Engine coolant temperature / Engine oil pressure / Hydraulic oil filter restriction / Hydraulic oil temperature / Park brake / Transmission oil pressure / Transmission oil temperature / Transmission oil filter restriction Full heating and ventilation ducting Gauges, electric, illuminated: Engine coolant temperature / Fuel level Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degrees positions Tilt-telescopic steering wheel with spinner knob

Standard

•

• • • • • • ■

• • • •■ • •■ •■ •

• • • • •

Optional ■

Standard and Optional Equipment

®Timberjack and the donkey symbol are trade marks of Timberjack. Orbitrol is a registered trademark of Eaton Corporation. BP-10M-11/00

Operator’s Station (continued) Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system AM/FM/WB/ cassette stereo sound system (field installed) Premium AM/FM/WB/CD stereo sound system Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)

• ■

Tires:

•■

23.1-26,14 ply rating 23.1-26,14 ply rating, narrow gauge 28L-26,12 ply rating 28L-26,12 ply rating, narrow gauge 28L-26,14 ply rating 24.5-32,16 ply rating

■ ■ ■ ■

Hydraulic System: ■

■

Hydraulic oil cooler, side-by side mounted to radiator Single-lever, blade control Vertical, spin-on return oil filter, 10 micron with bypass

Winch: ■ ■ ■ ■ ■ ■

Model 4000 (203 mm/8 in. drum standard speed) Model 4000 (203 mm/8 in. drum high speed) Model 4000 (254 mm/10 in. drum high speed)

Frames:

• • • •■ ■

• • •

Articulation locking bar, self storing Frame clean-out and service doors Stacking blade, 2184 mm (86 in.) wide, with replaceable cutting edge Stacking blade extensions, 381 mm (15 in.) per side ■

Standard

•

Optional ■

Note: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with ICED and SAE standards. Except where otherwise noted, these specifications are based on a unit with roll-over protective structure, full fuel tank, 80 kg (175 lb) operator, and standard equipment.

The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufactured previously.

www.timberjack.com

Timberjack

360D Single Arch Grapple Skidder


Electrical System







360D

Timberjack Single Arch Grapple Skidder Steering

Brakes


Power train performance (with 28L-26 tires)


No tire slip

Hydraulic System


Forward Gear Gear Gear Gear Gear Gear Gear Gear Reverse Gear Gear Gear Gear Gear Gear Gear

1 2 3 4 5 6 7 8





Pump - variable displacement axial piston Maximum rated flow 102 lpm (27 gpm) @ 2,200 rpm Pressure 20 685 kPa (3,000 psi) Oil filtration



Capacities 1 2 3 4 5 6 7



Fuel tank Cooling System Engine lubrication, including filter Transmission Differentials Front Rear Winch Hydraulic reservoir

189.0 L (50.0 US gal) 28.4 L (30.0 US qt.) 18.9 L (20.0 US qt.) 29.3 L (7.8 US gal) 17.0 17.0 35.2 30.3

L L L L

(4.5 (4.5 (9.3 (8.0

US US US US

gal) gal) gal) gal)

Winch (Optional) Type sealed, wet multi-disc clutch and brake pressurized lubrication, single lever control Cable capacity 15.8 mm (0.625 in.) cable 19.1 mm (0.75 in.) cable 22.2 mm (0.875 in.) cable 25.4 mm (1 in.) cable

4000 (203 mm (8 in.) drum) 77,4 m (254 ft.) 54,6 m (179 ft.) 39,3 m (129 ft.) 30,5 m (100 ft.)





360D

Timberjack Single Arch Grapple Skidder

K = Ground Clearance L = Wheel Tread M = Overall Width

Tire - 23.1-26

K - 498 mm (19.6 in.) L - 2,21 m (7 ft. 3 in.) M - 2,79 m (9 ft. 2 in.)

Tire - 23.1-26 (Narrow gauge) K - 498 mm (19.6 in.) L - 2,06 m (6 ft. 9 in.) M - 2,64 m (8 ft. 8 in.)

Tire - 28L-26

K - 514 mm (20.2 in.) L - 2,29 m (7 ft. 6 in.) M - 3 m (9 ft. 10 in.)

Tire - 28L-26 (Narrow gauge)

Tire - 24.5-32

K - 598 mm (23.5 in.) L - 2,49 m (8 ft. 2 in.) M - 3.11 m (10 ft. 2.5 in.)

Tire - 24.5-32 (Narrow gauge) K - 598 mm (23.5 in.) L - 2,26 m (7 ft. 5 in.) M - 2,88 m (9 ft. 5.5 in.)

K - 514 mm (20.2 in.) L - 2,18 m (7 ft. 2 in.) M - 2,9 m (9 ft. 6 in.)

A = Tong Opening at Tips B = Minimum Diameter of Stem C = Enclosure Area Tongs Tip-To-Tip

2160 mm (85 in.) 124 mm (5 in.) 0.75 sq. m (8 sq. ft.)

Grapple: the grapple has been engineered to provide durability and performance. A grease adjustable oscillation damper improves component life and reduces maintenance requirements. Constant pressure to keep the grapple closed on the load is a standard feature. Grapple shape and clamping force have been engineered to maximize load retention.

360D


G - Wheelbase

2920 mm (9 ft 7 in.)

A - Overall Height with Factory-Installed Water Tank 3170 mm (10 ft 4.8 in.)

H - Height of Grapple from Ground Level

864 mm (2 ft 10 in.)

B - Maximum Blade Lift Above Ground

1210 mm (3 ft 11.6 in.)

I - Reach of Grapple at Ground Level

1970 mm (6 ft 5.6 in.)

288 mm (11 ft 3 in.)

J - Reach of Grapple at Full Reach

2158 mm (7 ft 1 in.)

A - Overall Height

C - Maximum Blade Dig Below Ground D - Front Axle to Front of Machine E - Front Axle to Blade Cutting Edge Arc F - Front Axle to Articulation Joint

3010 mm (9 ft 10.5 in.)

K - Maximum Boom Height 1507 mm (4 ft 11 in.) 2112 mm (6 ft 11.1 in.)

L - Below Ground Reach of Grapple at Full Reach M - Overall Length

872 mm (34 in.) 6330 mm (20 ft 9 in.)

1575 mm (5 ft 2 in.)

Machine Weight


Based on Standard Machine Configuration, as follows:

Tires 23.1-26 28L-26 24.5-32

23.1-26 tires Screened cab Weight

2991 mm (9 ft 10 in.)

Standard decking blade All tanks filled 9,861 kg (21,740 lbs.)

50.3 kPa (7.3 psi) 42.2 kPa (6.1 psi) 45.7 kPa (6.6 psi)

360D

Timberjack Single Arch Grapple Skidder Standard and Optional Equipment

Brakes

Engine

Service brakes

Antifreeze, -36°C (-33°F) Blower-type cooling fan, enclosed with guard Coolant recovery tank Electric fuel shutoff with start key Fuel filter, vertically mounted, quick release Fuel/water separator, vertically mounted, quick release Isolation-mounted engine Oil drain shutoff for spill-free oil changes Oil filter, spin-on, vertical mount, full flow with bypass Oil-to-coolant engine oil cooler Padlock-ready engine side shields Perforated hood and side shields Side-by-side mounted radiator, transmission, and hydraulic oil cooler Electric ether starting aid


Transmission Direct drive power shift with eight forward and seven reverse speeds Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator

Axles Differential lock, with switch in shifter knob and indicator on dash Heavy-duty inboard planetary final drives Inboard sealed and lubricated wet disc brakes, front and rear Self-contained differential: Lock hydraulic circuit with filter

• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

• • • • • • •• •

Disc type, mounted inboard of axle final drives, sealed and lubricated, self-adjusting and self-equalizing front and rear Parking brake Spring applied, hydraulically released, wet multi-disc, integrally mounted in transmission

Operator’s Station Accessory power ports (2), 12-volt/15amp fuse Beverage holder Cab hydraulic tilt for service Canopy cab with tinted polycarbonate front windows and screens on all other openings/ Heater, 40,000 Btu/hr. (11.8 kW) Cab, fully enclosed, with polycarbonate windows on all openings with screens on the door windows only; also included: Air conditioner, R134a refrigerant / Heater, 40,000 Btu/hr. (11.8 kW) / Pressurizer Cell-phone storage compartment and power port in right hand armrest Deluxe interior trim package Dome light Door storage bins Fire extinguisher: 5 lb. 10 lb. Floormat Foot throttle Hand throttle Front wiper with washer Rear wiper with washer Full-function monitor instrumentation with audible warning alarm for: Air filter restriction indicator / Alternator voltage / Engine coolant temperature / Engine oil pressure / Hydraulic oil filter restriction / Hydraulic oil temperature / Park brake / Transmission oil pressure / Transmission oil temperature / Transmission oil filter restriction Full heating and ventilation ducting Gauges, electric, illuminated: Engine coolant temperature / Fuel level Hourmeter in monitor Lockable doors with start switch key Meets noise regulation: SAE J1166 (OSHA and BC) Mirror, interior rearview Operator manual with storage compartment Standard

•

• • • • • • ■

• • • • • •■ • •■ •■ •

• • • •• • •

Optional ■



Operator’s Station (continued) Operator protection with integral ROPS, FOPS, and OPS structure Retractable seat belt: 51 mm (2-in.) 76 mm (3-in.), anti-cinch Sunscreen (front and rear) Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degrees positions Tilt-telescopic steering wheel with spinner knob Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system Premium AM/FM/WB/CD stereo sound system (field installed) Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)

Tires: 23.1-26,14 ply rating 23.1-26,14 ply rating, narrow gauge 28L-26,12 ply rating 28L-26,12 ply rating, narrow gauge

Tires: (continued)

• •■ • • • • • ■ ■ ■

■ ■ ■

28L-26,14 ply rating 24.5-32,12 ply rating, narrow gauge 24.5-32,16 ply rating

Hydraulic System: “Constant hold” grapple close “Four wire” grapple hoses Hydraulic oil cooler, side-by side mounted to radiator Push button grapple rotate Single-lever controls (single-function grapples) Dual-lever controls (dual-function grapples) Vertical, spin-on return oil filter, 10 micron with bypass

Grapple: Cast-steel, wear-resistant tong tips Continuous 360° grapple head rotation Dual cylinder bunching style grapple head Heavy duty, high-torque rotate motor with gear reduction Single function with 2160 mm (85-in.) tong opening

• • • •• •• • • • • •

Winch: ■ ■ ■ ■ ■

•■

Model 4000 (203 mm 8 in. drum high speed) Model 4000 (203 mm 8 in. drum standard speed) Model 4000 (254 mm 10 in. drum high speed)

Frames:

■ ■ ■

• • •


■ ■

•

Standard Optional ■ Note: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on a units with full fuel tanks, 80 kg (175 lb.) operators, and standard equipment. The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufactured previously.

www.timberjack.com

Timberjack

460D Cable Skidder

Technical Data Engine John Deere - 6068T with altitudecompensating, spark-arresting turbocharger Peak power 114kW (151hp) net* Rated power 117kW (157 hp) gross* Governed rpm 2 200 rpm Cylinders 6 Displacement 6,8L (414 cu.in.) Max. net torque 41% @ 1400 rpm 647 Nm (479 lb.ft.) @ 1 400 rpm Fuel consumption 12-18 L/h (3.1 to 4.7 usg/hr.)

Air cleaner Dual stage with safety element and dust unloader valve Cooling system Heavy duty radiator with in-line core coolant recovery reservoir Cooling fan - blower Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

Engine (w/optional TC transmission)


John Deere – 6068T with altitudecompensating, spark-arresting turbocharger Peak Power 118kW (159hp) net* Rated Power 127kW (170hp) gross* Governed rpm 2 200 rpm Cylinders 6 Displacement 6,8L (414 cu.in.) Max. net torque 41% @ 1 400 rpm 680 Nm (504 lb.ft.) @ 1 400 rpm Fuel consumption 15-22L/h (3.9 to 5.8 usg/hr.)


Transmission (Optional) Single stage powershift with torque converter 6 Forward/6 Reverse Gears 'Bump Shift' transmission control

460D

Timberjack Cable Skidder Electrical System

Brakes





Steering Frame articulation +/- 45 degrees Orbitrol ™ valve, priority steering control

Oscillation

Power train performance (with 28L-26 tires)






No tire slip

Hydraulic System



1 2 3 4 5 6 7 8



1 2 3 4 5 6 7




159.0 L (42.0 US gal) 28.4 L (30.0 US qt.) 18.9 L (20.0 US qt.) 29.3 L (7.8 US gal) 17.0 L (4.5 28.4 L (7.5 35.2 L (9.3 41.6 L (11.0

US US US US

gal) gal) gal) gal)

Machine Weight Based on Standard Machine Configuration, as follows: 23.1-26 tires Screened cab Winch Weight

Standard decking blade All tanks filled, plus 79kg (175lb.) operator 10,841 kg (23,990 lbs.)

Ground Pressure Data Tires 23.1-26 28L-26 24.5-32 30.5L-32

55.3 46.2 49.9 44.0

kPa kPa kPa kPa

(8.0 (6.7 (7.2 (6.4

psi) psi) psi) psi)

460D


K = Ground Clearance L = Wheel K

M = Overall Width

L M

Tire - 23.1-26

Turning radius over tires Tire - 28L-26

Turning radius over tires Tire - 24.5-32

Turning radius over tires Tire - 30.5L-32


K - 498 mm (19.6 L - 2,21 m (7 ft. 3 M - 2,79 m (9 ft. 2 5,5 m (18 ft. 3 K - 514 mm (20.2 L - 2,28 m (7 ft. 6 M - 3 m (9 ft. 10 5,6 m (18 ft. 7 K - 598 mm (23.5 L - 2,38 m (7 ft. 9.5 M - 3 m (9 ft. 10 5,6 m (18 ft. 7 K - 615 mm (24.2 L - 2,35 m (7 ft. 8 M - 3.12 m (10 ft. 3 5,70 m (18 ft. 9

in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.)

Tire - 23.1-26 (Narrow gauge)

Turning radius over tires Tire - 28L-26 (Narrow gauge)

Turning radius over tires Tire - 24.5-32 (Narrow gauge)


K - 498 mm (19.6 L - 2,06 m (6 ft. 9 M - 2,64 m (8 ft. 8 5,4 m (17 ft. 11 K - 514 mm (20.2 L - 2,18 m (7 ft. 2 M - 2,9 m (9 ft. 6 5,6 m (18 ft. 4 K - 598 mm (23.5 L - 2,15 m (7 ft. 0.5 M - 2,77 m (9 ft. 1 5,5 m (18 ft. 2

in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.) in.)

Winch Type sealed, wet multi-disc clutch and brake pressurized lubrication, single lever control Cable capacity 4000 (203 mm (8 in.) drum) 15.8 mm (0.625 in.) cable 77,4 m (254 ft.) 19.1 mm (0.75 in.) cable 54,6 m (179 ft.) 22.2 mm (0.875 in.) cable 39,3 m (129 ft.) 25.4 mm (1 in.) cable 30,5 m (100 ft.) Linepull @ peak engine and 15,8 mm (0.625 in.) cable 4000 (203 mm (8 in.) drum high speed) 4000 (203 mm (8 in.) drum standard speed) 4000 (254 mm (10 in.) drum high speed) Linespeed @ 2,200 rpm and 15,8 mm (0.625 in.) cable 4000 (203 mm (8 in.) drum high speed) 4000 (203 mm (8 in.) drum standard speed) 4000 (254 mm (10 in.) drum high speed)



460D


A B B

GROUND LINE

D

F

E

G H

A - Overall Height

3023 mm

A - Overall Height with Factory-Installed Water Tank 3183 mm (10 ft 5.3 in.) B - Maximum Blade Lift Above Ground

1308 mm (4 ft 3.5 in.)

C - Maximum Blade Dig Below Ground

367 mm (14 ft 5 in.)

D - Front Axle to Front of Machine

C

E - Front Axle to Blade Cutting Edge Arc

2292 mm (7 ft 6 in.)

F - Front Axle to Articulation Joint

1727 mm (5 ft 8 in.)

G- Wheelbase H - Overall Length

3430 mm (11 ft 3 in.) (23 ft 8.6 in.)

1685 mm (5 ft 6.3 in.)

Note: Side view dimensions are for machine equipped with 28L-26 10 PR LS2 tires and adjustable log arch.

460D

Timberjack Cable Skidder Standard and Optional Equipment Engine Antifreeze, -36°C (-33°F) Blower-type cooling fan, enclosed with guard Coolant recovery tank Electric fuel shutoff with start key Fuel filter, vertically mounted, quick release Fuel/water separator, vertically mounted, quick release Isolation-mounted engine Oil drain shutoff for spill-free oil changes Oil filter, spin-on, vertical mount, full flow with bypass Oil-to-coolant engine oil cooler Padlock-ready engine side shields Perforated hood and side shields Side-by-side mounted radiator, transmission, and hydraulic oil cooler Electric ether starting aid


Transmission Direct drive power shift with eight forward and seven reverse speeds Single stage powershift with torque converter Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator Transmission disconnect, for cold weather starting

Axles Differential lock, with switch in shifter knob and indicator on dash Self-contained differential: Lock hydraulic circuit with filter Heavy-duty inboard planetary final drives Inboard sealed and lubricated wet disc brakes, front and rear

• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

• ■

• • • • ■

• • • •

Brakes Service brakes Disc type, mounted inboard of axle final drives, sealed and lubricated, self-adjusting and self-equalizing front and rear Parking brake Spring applied, hydraulically released, wet multi-disc, integrally mounted in transmission

Operator’s Station Accessory power ports (2), 12-volt/15amp fuse Beverage holder Cab hydraulic tilt for service Canopy cab with tinted polycarbonate front windows and screens on all other openings Cab, fully enclosed, with polycarbonate windows on all openings with screens on the door windows only; also included: Air conditioner, R134a refrigerant / Heater, 40,000 Btu/hr. (11.8 kW) / Pressurizer Deluxe interior trim package Dome light Door storage bins Fire extinguisher: 5 lb. 10 lb. Floormat Foot throttle Hand throttle Front wiper with washer Rear wiper with washer Full-function monitor instrumentation with audible warning alarm for: Air filter restriction indicator / Alternator voltage / Engine coolant temperature / Engine oil pressure / Hydraulic oil filter restriction / Hydraulic oil temperature / Park brake / Transmission oil pressure / Transmission oil temperature / Transmission oil filter restriction Full heating and ventilation ducting Gauges, electric, illuminated: Engine coolant temperature / Fuel level Hourmeter in monitor Lockable doors with start switch key Meets noise regulation: SAE J1166 (OSHA and BC) Mirror, interior rearview Operator manual with storage compartment Operator protection with integral ROPS, FOPS, and OPS structure Standard

•

• • • • • • ■

• • • •■ • •■ •■ •

• • • • • • • •

Optional ■



Operator’s Station (continued) Retractable seat belt: 2-in. (51 mm) 3-in. (76 mm) Sunscreen (front and rear) Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degree positions Tilt-telescopic steering wheel with spinner knob Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Adjustable lumbar support / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system AM/FM/WB/ cassette stereo sound system (field installed)* Premium AM/FM/WB/CD stereo sound system Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)*

• •■ • • •• • ■

■

■

■ ■ ■ ■ ■ ■

Tires:

•■

23.1-26,14 ply rating 23.1-26,14 ply rating, narrow gauge 28L-26,12 ply rating 28L-26,12 ply rating, narrow gauge 28L-26,14 ply rating 24.5-32,16 ply rating 30.5L-32,16 ply rating

■ ■ ■ ■ ■

Hydraulic System: Hydraulic oil cooler, side-by side mounted to radiator Single-lever, blade control Vertical, spin-on return oil filter, 10 micron with bypass

Winch: Model 4000 (203 mm/8 in. drum standard speed) Model 4000 (203 mm/8 in. drum high speed) Model 4000 (254 mm/10 in. drum high speed)

Frames:

• • • •■ ■

• • •


Standard

•

Optional ■

Note: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with ICED and SAE standards. Except where otherwise noted, these specifications are based on a unit with roll-over protective structure, full fuel tank, 80 kg (175 lb) operator, and standard equipment. The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufactured previously.

www.timberjack.com

Timberjack

460D Dual Arch Grapple Skidder

Technical Data Engine John Deere - 6068T with altitudecompensating, spark-arresting turbocharger Peak power 114kW (151hp) net* Rated power 117kW (157 hp) gross* Governed rpm 2 200 rpm Cylinders 6 Displacement 6,8L (414 cu.in.) Max. net torque 41% @ 1 400 rpm 647 Nm (479 lb.ft.) @ 1 400 rpm Fuel consumption 12-18 L/h (3.1 to 4.7 usg/hr.)

Air cleaner Dual stage with safety element and dust unloader valve Cooling system Heavy duty radiator with in-line core coolant recovery reservoir Cooling fan - blower Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

Engine (w/optional TC transmission)


John Deere – 6068T with altitudecompensating, spark-arresting turbocharger Peak Power 118kW (159hp) net* Rated Power 127kW (170hp) gross* Governed rpm 2 200 rpm Cylinders 6 Displacement 6,8L (414 cu.in.) Max. net torque 41% @ 1 400 rpm 680 Nm (504 lb.ft.) @ 1 400 rpm Fuel consumption 15-22L/h (3.9 to 5.8 usg/hr.)


Transmission (Optional) Single stage powershift with torque converter 6 Forward/6 Reverse Gears 'Bump Shift' transmission control

460D

Timberjack Dual Arch Grapple Skidder Electrical System

Brakes





Hydraulic System


Pump - variable displacement axial piston Maximum rated flow 159 lpm (42 gpm) @ 2,200 rpm Pressure 20 685 kPa (3,000 psi)

Oscillation

Oil filtration


Hydraulic oil cooler Air to oil type

Steering

Power train performance (with 30.5L-32 tires) No tire slip Forward Gear Gear Gear Gear Gear Gear Gear Gear Reverse Gear Gear Gear Gear Gear Gear Gear



1 2 3 4 5 6 7 8



1 2 3 4 5 6 7




Filter Spin on return filter Bypass type



US US US US

gal) gal) gal) gal)

Winch (Optional) Type sealed, wet multi-disc clutch and brake pressurized lubrication, single lever control Cable capacity 4000 (203 mm (8 in.) drum) 15.8 mm (0.625 in.) cable 77,4 m (254 ft.) 19.1 mm (0.75 in.) cable 54,6 m (179 ft.) 22.2 mm (0.875 in.) cable 39,3 m (129 ft.) 25.4 mm (1 in.) cable 30,5 m (100 ft.)





460D

Timberjack Dual Arch Grapple Skidder

K = Ground Clearance L = Wheel Tread K

M = Overall Width L M

Tire - 28L-26

K - 514 mm (20.2 in.) L - 2,4 m (7 ft. 10.5 in.) M - 3,11 m (10 ft. 2.5 in.)

Tire - 28L-26 (Narrow gauge)

Tire - 24.5-32

K - 598 mm (23.5 in.) L - 2,49 m (8 ft. 2 in.) M - 3,11 m (10 ft. 2.5 in.)

Tire - 24.5-32 (Narrow gauge) K - 598 mm (23.5 in.) L - 2,26 m (7 ft. 5 in.) M - 2,88 m (9 ft. 5.5 in.)

Tire - 30.5L-32

K - 615 mm (24.2 in.) L - 2,46 m (8 ft. 1 in.) M - 3.23 m (10 ft. 7.5 in.)

K - 514 mm (20.2 in.) L - 2,29 m (7 ft. 6.5 in.) M - 3,01 m (9 ft. 10.5 in.)

Standard Grapple Head A = Tong Opening at Tips 2921 mm (115 in.) B = Minimum Diameter of Stem 140 mm (5.5 in.) C = Enclosure Area Tongs 0.97 sq. m (10.4 sq. ft.) Tip-To-Tip High Capacity Grapple Head A = Tong Opening at Tips 3124 mm (123 in.) B = Minimum Diameter of Stem 132 mm (5.2 in.) C = Enclosure Area Tongs 1.09 sq. m (11.7 sq. ft.) Tip-To-Tip Grapple: the grapple has been engineered to provide durability and performance. A grease adjustable oscillation damper improves component life and reduces maintenance requirements. Constant pressure to keep the grapple closed on the load is a standard feature. Grapple shape and clamping force have been engineered to maximize load retention.

460D


A K

K

B

H

I J

F

D

G

L

E M

C

3030 mm (9 ft 11 in.)

G - Wheelbase

3190 mm (10 ft 5 in.)


1376 mm (4 ft 6 in.)


1310 mm (4 ft 3.5 in.)


1536 mm (5 ft 1 in.)

C - Maximum Blade Dig Below Ground

367 mm (1 ft 2.5 in.)


2968 mm (9 ft 8.9 in.)

K - Maximum Boom Height

3680 mm (12 ft 1 in.)

A - Overall Height A - Overall Height with Factory-Installed Water Tank

D - Front Axle to Front of Machine E - Front Axle to Blade Cutting Edge Arc F - Front Axle to Articulation Joint

1685 mm (5 ft 6.3 in.) 2292 mm (7 ft 6.2 in.)


1072 mm (4 ft 2 in.) 7345 mm (24 ft 1 in.)

1727 mm (5 ft 8 in.)

Machine Weight



Tires 24.5-32 30.5L-32

30.5L-32 tires Screened cab Weight

3683 mm (12 ft 1 in.)


56.7 kPa (8.2 psi) 47.0 kPa (6.8 psi)

460D

Timberjack Dual Arch Grapple Skidder Standard and Optional Equipment

Brakes

Engine

Service brakes



• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

Transmission Direct drive power shift with eight forward and seven reverse speeds Single stage powershift with torque converter Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator Transmission disconnect, for cold weather starting


• ■

• • • • ■

• • • •



•

• • • • • • ■

• • • • •■ • •■ •■ •

• • • •• • •

Optional ■



Operator’s Station (continued) Operator protection with integral ROPS, FOPS, and OPS structure Retractable seat belt: 51 mm (2-in.) 76 mm (3-in.), anti-cinch Sunscreen (front and rear) Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degrees positions Tilt-telescopic steering wheel with spinner knob Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system Premium AM/FM/WB/CD stereo sound system (field installed) Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)

Tires:

• •■ • • • • • ■ ■ ■

■ ■ ■ ■ ■

■ ■ ■ ■

28L-26,12 ply rating, narrow gauge 28L-26,14 ply rating 24.5-32,12 ply rating, narrow gauge 24.5-32,16 ply rating 30.5-32,16 ply rating

Hydraulic System: “Constant hold” grapple close “Four wire” grapple hoses Hydraulic oil cooler, side-by side mounted to radiator Push button grapple rotate Dual-lever controls Single lever pilot operated grapple control Vertical, spin-on return oil filter, 10 micron with bypass

Grapple: Cast-steel, wear-resistant tong tips Continuous 360° grapple head rotation Dual cylinder bunching style grapple head Heavy duty, high-torque rotate motor with gear reduction 2 921 mm (115”) tong opening 3 124 mm (123”) tong opening

• • • • •• ■ • • • • • •■

Winch: Model 4000 (203 mm/8 in. drum high speed) Model 4000 (203 mm/8 in. drum standard speed) Model 4000 (254 mm/10 in. drum high speed)

Frames:

■ ■ ■

• • •

Articulation locking bar, self storing Frame clean-out and service doors Stacking blade, 2184 mm (86 in.) wide, with replaceablecutting edge Stacking blade extensions, 381 mm (15 in.) per side ■

•

Standard Optional ■ Note: Specifications and design subject to change without notice. Whenever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on a units with full fuel tanks, 175 lb. (79 kg) operators, and standard equipment. The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufactured previously.

www.timberjack.com

Timberjack



Electrical System







560D

Timberjack Dual Arch Grapple Skidder Steering

Brakes


Power train performance (with 30.5L-32 tires)


No tire slip

Hydraulic System



1 2 3 4 5 6 7 8













US US US US

gal) gal) gal) gal)

Winch (Optional) Type sealed, wet multi-disc clutch and brake, pressurized lubrication, single lever control Cable capacity 6000 (2794 mm (11 in.) drum) 15.8 mm (0.625 in.) cable 114 m (373 ft.) 19.1 mm (0.75 in.) cable 80.2 m (263 ft.) 22.2 mm (0.875 in.) cable 58 m (189 ft.) 25.4 mm (1 in.) cable 45 m (147 ft.) Linepull @ peak engine and 15,8 mm (0.625 in.) cable 6000 Linespeed @ 2,200 rpm and 15,8 mm (0.625 in.) cable 6000

bare drum 208 kN (46,861 lb.) bare drum 44.2 m/min. (145 fpm)

full drum 135 kN (29,763) full drum 69.5 m/min. (228 fpm)

560D



Tire - 24.5-32


K - 582 mm (22.9 in.) L - 2,49 m (8 ft. 2 in.) M - 3,11 m (10 ft. 2.5 in.) 6,4 m (21.0 in.)

Tire - 30.5-32



560D


A K

K

B

H

I J

D

G

L

A - Overall Height

F

E M

3130 mm (10 ft 3.1 in.)

C

3680 mm (12 ft 1 in.)



1331 mm (4 ft 4 in.)


1500 mm (4 ft 11 in.)


1547 mm (5 ft 1 in.)

360 mm (1 ft 2.2 in.)


2968 mm (9 ft 8.9 in.)

C - Maximum Blade Dig Below Ground D - Front Axle to Front of Machine E - Front Axle to Blade Cutting Edge Arc

K - Maximum Boom Height 3781 mm (12 ft 4.9 in.) 1777 mm (5 ft 8 in.) 2474 mm (8 ft 1.4 in.)


1117 mm (4 ft 4 in.) 7763 mm (25 ft 5.6 in.)

F - Front Axle to Articulation Joint 1727 mm (5 ft 8 in.)G - Wheelbase

Machine Weight



Tires 24.5-32 30.5L-32



62.2 kPa (9.0 psi) 51.5 kPa (7.5 psi)

560D

Timberjack Dual Arch Grapple Skidder Standard and Optional Equipment

Brakes

Engine

Service brakes



• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

Transmission Direct drive power shift with eight forward and seven reverse speeds Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator Transmission disconnect, for cold weather starting


• • • • • ■

• • • •



•

• • • • • • ■

• • • • •■ • •■ •■ •

• • • •• • •

Optional ■



Tires:

Operator’s Station (continued)

24.5-32,16 ply rating 30.5-32,16 ply rating

Operator protection with integral ROPS, FOPS, and OPS structure Retractable seat belt: 51 mm (2-in.) 76 mm (3-in.), anti-cinch Sunscreen (front and rear) Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degrees positions Tilt-telescopic steering wheel with spinner knob Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system Premium AM/FM/WB/CD stereo sound system (field installed) Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)

• •■ • • • • •

■

Hydraulic System: “Constant hold” grapple close “Four wire” grapple hoses Hydraulic oil cooler, side-by side mounted to radiator Push button grapple rotate Dual-lever controls Vertical, spin-on return oil filter, 10 micron with bypass

Grapple: ■ ■ ■

Cast-steel, wear-resistant tong tips Continuous 360° grapple head rotation Dual cylinder bunching style grapple head Heavy duty, high-torque rotate motor with gear reduction 3 124 mm (123”) tong opening 3 226 mm (127”) tong opening

Winch: Model 6000 (2794 mm/11 in.) drum high speed)

■ ■ ■ ■ ■

• • • • •• •• • • • • •■

Frames:

■

• • •


•


www.timberjack.com

Timberjack

560D Single Arch Grapple Skidder


Electrical System







560D

Timberjack Single Arch Grapple Skidder Steering

Brakes


Power train performance (with 30.5L-32 tires)


No tire slip

Hydraulic System



1 2 3 4 5 6 7 8













US US US US

gal) gal) gal) gal)

Winch (Optional) Type sealed, wet multi-disc clutch and brake, pressurized lubrication, single lever control Cable capacity 6000 (2794 mm (11 in.) drum) 15.8 mm (0.625 in.) cable 114 m (373 ft.) 19.1 mm (0.75 in.) cable 80.2 m (263 ft.) 22.2 mm (0.875 in.) cable 58 m (189 ft.) 25.4 mm (1 in.) cable 45 m (147 ft.) Linepull @ peak engine and 15,8 mm (0.625 in.) cable 6000 Linespeed @ 2,200 rpm and 15,8 mm (0.625 in.) cable 6000

bare drum 208 kN (46,861 lb.) bare drum 44.2 m/min. (145 fpm)

full drum 135 kN (29,763) full drum 69.5 m/min. (228 fpm)

560D



Tire - 24.5-32


K - 582 mm (22.9 in.) L - 2,49 m (8 ft. 2 in.) M - 3,11 m (10 ft. 2.5 in.) 6,4 m (21.0 in.)

Tire - 30.5L-32


Tire - 24.5-32 (Narrow Guage) K - 598 mm (23.5 in.) L - 2,26 m (7 ft. 5 in.) M - 2,88 m (9 ft. 5.5 in.)


560D


A K

K

B

H

I J

D

G

L

A - Overall Height

F

E M

3130 mm (10 ft 3.1 in.)

G - Wheelbase

C

3680 mm (12 ft 1 in.)




1500 mm (4 ft 11 in.)


2222 mm (7 ft 3.5 in.)

360 mm (1 ft 2.2 in.)


2968 mm (9 ft 8.9 in.)

C - Maximum Blade Dig Below Ground D - Front Axle to Front of Machine E - Front Axle to Blade Cutting Edge Arc F - Front Axle to Articulation Joint

K - Maximum Boom Height 3296 mm (10 ft 9.8 in.) 1777 mm (5 ft 8 in.) 2474 mm (8 ft 1.4 in.)


1117 mm (4 ft 4 in.) 7821 mm (25 ft 7.9 in.)

1727 mm (5 ft 8 in.)

Machine Weight



Tires 24.5-32 30.5L-32


863 mm (2 ft 10 in.)


60.3 kPa (8.6 psi) 49.9 kPa (7.2 psi)

560D

Timberjack Single Arch Grapple Skidder Standard and Optional Equipment

Brakes

Engine

Service brakes



• • • • • • •• • • • • • ■

•■ ■

• • •■ ■

Transmission Direct drive power shift with eight forward and seven reverse speeds Isolation-mounted transmission Oil filter, pressure side, 10 micron with bypass, spin-on, vertical mount Park brake, wet multi-disc, spring applied, hydraulically released, sealed and lubricated Transmission oil cooler, side-by-side mounted with radiator Transmission disconnect, for cold weather starting


• • • • • ■

• • • •



•

• • • • • • ■

• • • • •■ • •■ •■ •

• • • •• • •

Optional ■



Tires:

Operator’s Station (continued)

24.5-32,16 ply rating 30.5-32,16 ply rating

Operator protection with integral ROPS, FOPS, and OPS structure Retractable seat belt: 51 mm (2-in.) 76 mm (3-in.), anti-cinch Sunscreen (front and rear) Sunvisor (front) Swivel seat with 15-, 22.5-, and 30-degrees positions Tilt-telescopic steering wheel with spinner knob Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weight adjustment / Adjustable backrest angle / Armrests, two position AM/FM/WB/ stereo sound system AM/FM/WB/ cassette stereo sound system Premium AM/FM/WB/CD stereo sound system (field installed) Cab fresh-air precleaner Window glazing kit (canopy to cab field conversion)

• •■ • • • • •

■

Hydraulic System: “Constant hold” grapple close “Four wire” grapple hoses Hydraulic oil cooler, side-by side mounted to radiator Push button grapple rotate Dual-lever controls Vertical, spin-on return oil filter, 10 micron with bypass

Grapple: ■ ■ ■

Cast-steel, wear-resistant tong tips Continuous 360° grapple head rotation Dual cylinder bunching style grapple head Heavy duty, high-torque rotate motor with gear reduction 3 124 mm (123”) tong opening 3 226 mm (127”) tong opening

Winch: Model 6000 (2794 mm/11 in.) drum high speed)

■ ■ ■ ■ ■

• • • • •• •• • • • • •■

Frames:

■

• • •


•


www.timberjack.com

Timberjack

660D Cable Skidder

Technical Data Fan Engine

John Deere Cylinders 6 Displacement litres 8.10 cu.in. 496 Max. peak power* kW 156 @2000 rpm hp 209 Rated Max. torque* Nm 914 @1400 rpm lb.-ft. 674 Flywheel power* kW 134 @2200 rpm hp 180 Flywheel Max. torque*Nm 875 @1400 rpm lb.-ft. 645 Governed rpm

2200

*Engine performance per SAE test criteria/performance

Air Cleaner Dry type, 2 stage with safety element Evacuator valve

Cooling System 8 row, inline, 3 pass radiator Fan side, steel reinforced copper fins System pressure 103 kPa (15 psi) Steel surge tank

Blower type 9 Blade

Engine Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

Electrical System 12 volt 130 amp alternator Batteries - 2 x12 volt, 950 CCA 185 ah each Electrical cut-off in cab

Fuel System Fuel capacity - 321 litres (84.7 usg) Water separator standard

Transmission Single stage torque converter Modulated powershift transmission 6 speeds forward/3 speeds reverse EGS Electronic Gear Shift single lever bumpshift controller Transmission declutch PTO clutch for winch drive Transmission oil to coolant type cooler

660D

Timberjack Cable Skidder Axles

Hydraulic Cylinders Bore

Extreme duty outboard planetary type Hydraloc differential locks, front and rear On the go engagement

Steer Decking Blade

Steering Frame articulation +/- 45 degrees Orbitrol ™ valve, priority steering control

T60D Winch


Service Brakes Wet wheel end brakes, both axles

Parking Brake Spring applied, hydraulic off, wet brake, sealed, in rear of transmission

Travel speeds (Based on standard 30.5L-32 tires)

1 2 3 4 5 6

F F F F F F

Maximum speeds kph / mph 4.9 / 3.02 1R 6.6 / 4.12 2R 9.1 / 5.63 3R 12.3 / 7.70 21.4 / 13.30 29.2 / 18.11

kph 4.9 9.1 21.4

/ mph / 3.02 / 5.63 / 13.30

Hydraulic System Pump Closed center, variable displacement, axial type piston Pressure compensated Flow @2200 rpm 165 lpm (43.5 gpm) Pressure 20 685 Pa (3,000 psi) Hydraulic tank Capacity 45.2 litres (11.9 usg) Pressure 35 kPa (5 psi) Fluid level sight gauge Manual transfer pump Hydraulic oil cooler Air to oil type Front mounted,hinged for service Filter Spin on return filter Bypass type

Rod dia. Stroke mm/inches 100 50 455 4 2 18 100 50 455 4 2 18

Rated Brake Capacity 267 kN (60,000 lbs.) Rated Line Pull Bare drum 158 kN (35,640 lbs.) Full drum 107 kN (26,185 lbs.) Line speed Bare drum 0-99 m/min (0-326 ft/min) Full drum 0-135 m/min (0-444 ft/min) Drum Diameter - 280 mm (11 in.) Cable Diameter - 16 mm (5/8 in.); 19 mm (3/4 in.) Drum Capacity 114m (379 ft) with 16 mm (5/8 in.) Cable diameter 81m (267 ft) with 19 mm (3/4 in.) Cable diameter

Fairlead Assembly Fabricated weldment, multi position, with fairlead, 15 cm (6 in.) fairlead spacer and side rollers. Fairlead roller type - Concave shape, induction hardened Diameter Length mm/inch mm/inch 168 / 6.6 284 / 11.2 Vertical rollers 95 / 3.75 443 / 17.5 Horizontal rollers 95 / 3.75 443 / 17.5 Horizontal Top rollers - available - factory installed option

Fenders Integral with rear chassis weldment Heavy duty, “rolled” design Designed to provide protection for tires

Machine Weight Based on standard machine configuration, as follows: 30.5L-32 Tires 3000 mm (118") Decking blade Open cab All tanks filled, plus T60D Winch 90Kg (200 lb.) Operator


Front axle 8 900 19,579 59.4

Rear axle 6 072 13,359 40.6

Total 14 972 32,938

660D


A= B= C= D=

3 162 mm (124.5") E = 1 438 mm 3 000 mm (118") F = 936 mm 2 388 mm (94") H = 843 mm J1 = 1 463 mm +/- 45°

Tire Size 35.5L-32 68/50.00-32 73/44.00-32

A 3 493 mm (138") 4 089 mm (161") 3 860 mm (152")

(57") J2 = 1 610 mm (63") N = (37") K = 655 mm (26") O = (33") L = 3 260 mm (128") P = (58") M = 1 825 mm (72") Q = C 2 591 mm (102") 2 819 mm (111") 2 795 mm (110")

3 3 6 4

780 293 580 213

mm mm mm mm

(149") R = 7 230 mm (285") (130") S1 = 439 mm (17.3") (259") S2 = 478 mm (18.8") (166") T = 265 mm (10")

L1 3 362 mm (132") 3 284 mm (129") 3 301 mm (128")

Note: Machine height is approximate. Tire dimensions may vary +/- 50 mm (2"). Dimensions "A" through "Z" are based on 30.5L-32 Tires with 6" fairlead spacer.

L2 3 380 mm (133") 3 246 mm (128") 3 302 mm (130")

X = 6 340 mm (250") Y = 169 mm (6.7") Z = 648 mm (25")

Z 699 mm (27.5") 565 mm (22.2") 621 mm (24.4")

L1 = With water tank option L2 = With working light option

660D

Timberjack Cable Skidder Standard and Optional Equipment Engine

Transmission

Air filter, dual, outer/inner safety element type, with vacuator valve Air intake precleaner Antifreeze -36°C (-33°F) Blower type cooling fan Suction type cooling fan Coolant Recovery tank Electric Fuel Shutoff, key activated Fuel filters, primary/secondary, spin on type Fuel/water separator, with drain High capacity water separator Iso-mounted engine/transmission assemblies Muffler/spark arrestor Oil drain with “Enviro-rite” drain system Oil filter, spin on, vertical mount Oil to coolant type engine oil cooler Padlock ready side panels Pump (hydraulic) unloading feature

Single stage torque converter Modulated powershift 6 speeds forward/3 speeds reverse EGS Electronic Gear Shift Transmission declutch Winch PTO clutch Transmission oil to coolant type cooler

• •• •■ • • • •■ • • • • • • • Electrical Alternator, 12 volt, 130 amperes • Batteries, dual, 950 CCA each, 185 ah reserve each • Electric Shut Off Master Switch, cab mounted •■ Electric engine block heater Electric engine oil pan heater Lights, none Lights, roading with open cab Lights, working with enclosed cab

■

•■

Axles Extreme duty outboard planetary type Front - Lockable differential On the go engagement Rear - Lockable differential On the go engagement Note: Front and rear differential locks can be independently activated.

• • • • • • • •• • • •

Brakes Service brakes Enclosed disc type, oil cooled, wheel end mounted Fully enclosed, self adjusting

•

Parking brake Spring applied, hydraulic released, Multi disc, oil cooled, sealed, in rear of transmission

•

■

Standard

•

Optional ■

660D

Timberjack Cable Skidder Standard and Optional Equipment Cab - Standard Fully screened Cab Tinted Lexan Front Window Washer/Wiper Rear heater Integral cab with ROPS, OPS, FOPS rating

• • • • •

Instrumentation - Standard Cab Full gauge/warning package as follows: Engine oil pressure Light Engine coolant temperature Gauge Transmission oil pressure Light Transmission oil temperature Gauge Hydraulic temperature Gauge Charging system Light Parking brake Light Declutch on/off Light Diff lock on/off Light Air filter warning Light Water tank warning Light Secondary steering Light

• • •• • • • •• •■ ■

Cab - Optional Fully enclosed, including the following: Unitized cab with ROPS, OPS, FOPS rating Tinted Lexan windows Front washer/wiper Left/Right opening doors, with sliding windows Heater/pressurizer/Air conditioner module Fully adjustable seat with seat belt Floormat Dash mounted ignition switch Master electrical cut off switch, dash mounted Foot operated throttle Foot operated brake Dash mounted parking brake Wheel type steering, power assist, orbitrol Joystick controls for blade Water Tank Auxiliary Steering System 5 lb. Fire extinguisher 10 lb. Fire extinguisher

Standard

•

• • • • • •• • • • • • • • • •■ •■

Optional ■

Tire Chart Overall Width mm / Inch

Ground Clearance mm / Inch


30.5L-32*

3 162 124.5

638 25.1

62/9.04 42/6.10

35.5L-32

3 493 137.5

698 27.5

51/7.40 35/5.03

68x50.00-32

4 089 161

565 22.2

42/6.09 28/4.11

73x44.00-32

3 860 152

725.7 28.6

47/6.78 32/4.58


Tire Size

* Standard tire NOTES: • All dimensions based on unit equipped with Extreme Duty 2 515 mm (99 in.) axles • Based on standard equipped machine • Footprints or tire contact area from manufacturer’s data, at 76 mm (3") penetration


www.timberjack.com

Timberjack



Cooling System

Cylinders Displacement

8 row, inline, 3 pass radiator Fan side, steel reinforced copper fins System pressure 103 kPa (15 psi) Steel surge tank

John Deere 6 litres 8.10 cu.in. 496 Max. peak power* kW 156 @2000 rpm hp 209 Rated Max. torque* Nm 914 @1400 rpm lb.-ft. 674 Flywheel power* kW 134 @2200 rpm hp 180 Flywheel Max. torque*Nm 875 @1400 rpm lb.-ft. 645 Governed rpm

2200


Air Cleaner Dry type, 2 stage with safety element Evacuator valve

Fan Blower type 9 Blade

Engine Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted

Electrical System 12 volt 130 amp alternator Batteries - 2 x12 volt, 950 CCA, 185 ah each Electrical cut-off in cab

Fuel System Fuel capacity - 349 litres (92.3 usg) Water separator standard

660D

Timberjack Dual Arch Grapple Skidder Transmission

Hydraulic System

Single stage torque converter Modulated powershift transmission 6 speeds forward/3 speeds reverse EGS Electronic Gear Shift single lever bumpshift controller Transmission declutch PTO clutch for winch drive Transmission oil to coolant type cooler

Pump Closed center, variable displacement, axial type piston Pressure compensated Flow @ 2200 rpm lpm 165 gpm 43.5 Pressure Pa 20 685 psi 3 000 Hydraulic tank Capacity litres 45.2 Pressure kPa 35 Fluid level sight gauge Manual transfer pump

Axles Outboard planetary type Hydraloc differential locks, front and rear On the go engagement


Oscillation

Hydraulic Cylinders


Bore

Service Brakes Wet wheel end brakes, both axles

Steer

Parking Brake

Decking Blade

Spring applied, hydraulic off, wet brake, sealed, in rear of transmission

Grapple, Boom

Travel speeds

Grapple, Arch

Based on standard 30.5L-32 tires

1 2 3 4 5 6

F F F F F F

11.9 5

Filter Spin on return filter Bypass type Indicator light standard with Monitor

Steering

Maximum speeds kph / mph 4.9 / 3.02 1R 6.6 / 4.12 2R 9.1 / 5.63 3R 12.3 / 7.7 21.4 / 13.30 29.2 / 18.11

usg psi

100 4 100 4 90 3.5 100 4

Rod dia. Stroke mm/inches 50 455 2 18 50 455 2 18 50 686 2 27 50 686 2 27

Weight kph 4.9 9.1 21.4

/ mph / 3.02 / 5.63 / 13.30

T40D Winch Rated brake capacity 178 kN (40 000 lbs.) Line speed Bare drum m/min 0-99 ft/min 0-326 Full drum m/min 0-135 ft/min 0-444

Based on standard machine configuration, as follows: 30.5L-32 Tires TJ 130" Bunching head Enclosed cab, heater, A/C All tanks filled, plus T40D Winch 90Kg (200 lb.) Operator 3000 mm (118") Decking blade


Front axle 9 081 19 980 51.6

Rear axle 8 486 18 670 48.4

Total 17 567 38 650

660D


A= B= C= D=

3 162 mm(124.5") 2 388 mm (94") 3 000 mm (118") +/- 45°

Tire Size 35.5L-32 73/44.00-32 30.5L-32/24.5-32 Dual

E= F= H= J1 =

1 438 mm 936 mm 843 mm 1 756 mm

A 3 493 mm (138") 3 860 mm (152") 4 250 mm (167")

(57") J2 = 2 676 mm (105") N = 3 (37") K = 655 mm (26") O = 3 (33") L = 3 260 mm (128") P = 6 (69") M = 1 825 mm (72") Q = 4 B 2 591 mm (102") 2 795 mm (110") 2 880 mm (114")

780 293 811 213

mm mm mm mm

(149") R = 7 (130") S1 = 1 (268") S2 = 1 (166") S3 = 2 S4 = 2

L1 3 362 mm (132") 3 284 mm (129") 3 301 mm (130")

Note: Machine height is approximate. Tire dimensions may vary +/- 2" (50 mm). Dimensions "A" through "Z" are based on 30.5L-32 Tires and Timberjack 130" head.

818 462 589 443 958

(10") mm (308") T = 265 mm mm (58") V1 = 240 mm (9.4") mm (63") V2 = 953 mm (38") mm (96") X = 6 340 mm (250") mm (116") Z = 648 mm (25")

L2 3 407 mm (134") 3 329 mm (131") 3 346 mm (132")

Z 709 mm (28") 631 mm (25") 735 mm (29")

L1 = With water tank option L2 = With working light option

660D

Timberjack Dual Arch Grapple Skidder Bunching Head

Grapple Head

Timberjack 130”

K-Maximum Opening

3 309.8 mm (130.3 in.)

L-Contained Area

190 mm (7.48 in.)

M-Minimum Opening

148 m2 (16.0 ft.2)

N-Fully Open Height

1 626.1 mm (64.0 in.)

O-Tip to Tip Height

2 015.6 mm (79.35 in.)

P-Fully Closed Height

1 248 mm (49.1 in.)

660D

Timberjack Dual Arch Grapple Skidder Standard and Optional Equipment Engine

Cab

Air filter, dual, outer/inner safety element type, with vacuator valve Air intake precleaner Antifreeze -33°F(-36°C) Blower type cooling fan Suction type cooling fan Coolant Recovery tank Electric Fuel Shutoff, key activated Fuel filters, primary/secondary, spin on type Fuel/water separator, with drain High capacity water separator Grapple tong constant pressure feature Iso-mounted engine/transmission assemblies Muffler/spark arrestor Oil drain with “Enviro-rite” drain system Oil filter, spin on, vertical mount Oil to coolant type engine oil cooler Padlock ready side panels Pump (hydraulic) unloading feature

Integral cab with ROPS, OPS, FOPS rating Iso mounted, tilting cab Fully enclosed, including the following: Tinted Lexan windows Front washer/wiper Left/Right opening doors, with sliding windows Heater/pressurizer/Air conditioner module Fully adjustable seat with anti-cinch seat belt Floormat Dash mounted ignition switch AM/FM Radio/Cassette Electrical cut off switch, dash mounted √ Foot operated throttle Foot operated brake Dash mounted parking brake Wheel type steering, power assist, orbitrol Single lever joystick control (pilot/electric for: arch, boom, grapple, grapple constant pressure and rotate. Manual joystick controls for blade 5 lb. Fire extinguisher Fully Screened Cab with Tinted Lexan Front Windshield, Washer/Wiper, Rear Heater Water Tank Auxiliary Steering System 10 lb. Fire extinguisher Full Monitor Package with Bargraphs and Alarm (STOP) Light and Buzzer for : Engine Coolant Temperature Transmission Oil Temperature Hydraulic Oil Temperature Fuel Level Digital display for Hourmeter, Gear Selector, RPM, Temperature Functions. Indicator Lights for : Engine Oil Pressure Transmission Oil Pressure Low Coolant Level Auxiliary Steering (when equipped) Parking Brake Alternator Charging Air Filter Indicator Water Tank Warning (when equipped) Hydraulic Oil Filter Differential lock(s) “on” indicator Transmission declutch Fault Detection Display Low Brake Pressure Indicator

• •• •■ • • • •■ • • • • • • • • Electrical Alternator, 12 volt, 130 amperes • Batteries, dual, 950 CCA each, 185 ah reserve each • Electric Shut Off Master Switch, cab mounted •■ Electric engine block heater Electric engine oil pan heater Lights, none Lights, roading Lights, working

Transmission Single stage torque converter Modulated powershift 6 speeds forward/3 speeds reverse EGS Electronic Gear Shift Transmission declutch Winch PTO clutch Transmission oil to coolant type cooler

Brakes Service brakes Independent, front and rear, wet wheel end type Fully enclosed, self adjusting, Parking brake Spring applied, hydraulic off, wet brake, sealed, in rear of transmission

Axles Outboard planetary type "Hydraloc" differential locks, front and rear On the go engagement

■ ■

•■ • • • • • • • • • • • •

Standard

•

• • • • • • • • • • • • • • • • • • ■ ■ ■ ■

• • • • • • •• • • • • • • • • • • •

Optional ■

Tire Chart


Tire Size

Overall Width mm/Inch

Ground Clearance mm/Inch


* 30.5L-32

3 162 124.5

640 25.1

60/8.7 56/8.1

35.5L-32

3 493 137.5

700 27.5

50/7.2 46/6.7

73x44.00-32

3 860 152

630 24.4

45/6.5 42/6.1

4 242 167

640 25.1

36/5.3 35/5.2

Dual tires 30.5L-32 24.5-32 * Standard tire

NOTES: • Based on standard equipped machine • Footprints or tire contact area from manufacturer’s data at 76 mm (3”) penetration.


www.timberjack.com

YOUR YEAR ROUND SKIDDING SOLUTION ! The TG88C grapple has been specifically designed to perform in sensitive ground conditions. A massive 45 ft2 (4,2 m2) grapple is mounted on a dual boom arch providing over 18 feet travel (5,5 m). These booms fold over the main frame and distribute the load toward to the front of the machine for better weight distribution. An optional heel can be mounted on the arch to lift and accumulate multiple tree bunches. The result is a highly productive immense grapple skidder on Trans-Gesco's proven environmental friendly eight-wheel drive computer controlled traction system, which provides the following advantages : - Extremely low ground pressure for minimum ground disturbance, in site sensitive situations - Faster loading time and higher productivity on short skid distances - Easier to load and skid the large and long trees typically found in Western North American timber stands - The machine can push itself with its boom in difficult ground situations - Easier and faster to unload at road side in downhill slope conditions This innovative grapple skidder is Trans-Gesco's new economical solution to high volume producers facing the extreme logging conditions found in today's ever changing forest industry

Note : Trans-Gesco reserves the right to change specifications without notice.

www.transgesco.com [email protected] 1-418-275-6808 1 800-472-3527

DIESEL ENGINE

HYDRAULIC SYSTEM

CAB AND CONTROLS

· Cummins M11, Aftercooled · Power : 350 hp (261 kw) @ 2 100 rpm · Torque : 875 ft-lb (1 181 N-m) @ 2 100 rpm · Displacement : 661 in3 (10,8 litres) · Fuel tank capacity : 291 USgal (1 100 liters)

· Two 65 gpm (246 l / min) implement pumps with load sensing valves to run booms, grapple, steering and dozer blade · Operating pressure : 3 500 psi (241 bar) · Two main hydraulic tanks combined for a total capacity of 154 USgal (583 l) · One 13,2 USgal (50 l) refill tank. An electrical pump transfers the filtered oil to the main tanks. · Full flow return line filters, immersion type with easy to replace cartridges · ORS fittings through out

· Hydraulically tiltable cab for easy access (Electrical pump) · Lexan windows · Front and rear windshield wipers · Front and rear defroster fans · Air conditioning and heating system · Comfortable swivel mount chair with armrests and fore / aft / height adjustments · Electro-proportional joystick controls. (No oil in cab compartment) · Safety seat belt · Three large built-in tool boxes · Complete instrumentation panel · ROPS / FOPS / OPS certified structure · Sound level under 80 dBA

OPERATING WEIGHT · Approximate weight : 66 000 lbs (29 940 kg) without tracks

HYDROSTATIC DRIVE SYSTEMS · Draw bar pull : 160 000 lbs (716 kN) · Eight 80 cc variable displacement drive motors mounted on a planetary gear reduction final drive · Four 75 gpm (284 l / min) variable displacement drive pumps · In-board computer controlling traction and steering. Also dual horsepower limiter adjusting driving speed to available horsepower · Operating pressure : 6 000 psi (413 bar) · Hydrostatic brakes and spring applied parking brake on each wheel · Tandem oscillation : ± 19° · Steering : ± 35° · Travel speeds : Low : 0 - 2,2 mph (0 - 3,5 km/h) High : 0 - 4,4 mph (0 - 7,1 km/h)

TIRES · Eight 17,5 X 25, 20 ply with Trans-Gesco traction grooving · Optional R.L. tire inserts or Permafill filling for real heavy payloads

ELECTRICAL SYSTEM · 24 V DC, dual batteries · 100 A alternator · Electronic warning system for all critical engine and hydraulic functions. · (18) 75 W halogen lights

GRAPPLE · Maximum load capacity : 70 000 lbs (31 750 kg) · Accumulating area closed tip-to-tip : 45 ft2 (4,18 m2) · Lift capacity of 15 500 lbs (7 030 kg) at full reach · Reach : 18 ft (5,5 m) · Optional heel for lifting and bunching multiple tree bunches

Note : Trans-Gesco reserves the right to change specifications without notice.

OPTIONS · Choice of single grouser tracks shoes from 28 to 60 inches wide (711 to 1 524 mm) standard or "Banana" style · Dozer Blade · Fire suppression system · Proheat system · Quadco Snubber

www.transgesco.com [email protected] 1-418-275-6808 1 800-472-3527

The KM C SO FT TRA CK PRIM E M O VER has THREE M A JO R Design A dvantages over Conventional Utility Carriers. BA LA N CED W EIGHT DISTRIBUTIO N Because of the forw ard m ounting of the pow er train, and the m achine’s ability to carry the load or m ount an attachm ent w ell forw ard on the m achine, the com bined w eight of the vehicle and its payload is spread over the entire length of

TO RSIO N BA R SPRUN G SUSPEN SIO N

HIGH SPEED STEEL TRA CK (HSST)

Ten torsion bars attached individually to roadarm s provide the sprung suspension. Each set of road w heels can m ove up and dow n independently, there-by allow ing the tracks to conform to uneven surfaces.

Cast Steel track pads, connected w ith patented rubberbushed steel pins, perm it track flexibility w hile preventing m etal-to-m etal w ear and track contam ination from soils.

The KM C 2100 is designed for totalversatility in any industry requiring an A ll-Terrain, A ll-W eather utility carrier. The traction,speed,flotation and low ground pressure are an idealcom bination for w orking on m uskeg,sensitive soils or steep slopes. THE KM C SO FT TRA CK PRIM E M O VER M EETS A LL CURREN T EN VIRO N M EN TA L REQ UIREM EN TS FO R M IN IM A L SITE DEGRA DA TIO N . KEY O PERA TIO N A L DA TA

PRIM E A PPLICA TIO N S

M axim um Payload: 35,000lbs (15,873kg) M axim um W eight on Vehicle: 23,000lbs (10,431kg) Gross Vehicle W eight: 27,250lbs (12,358kg) Ground Pressure: 4.69psiat 0” soilpenetration 4.24psiat 6” soilpenetration

• • • • • •

CO N FIGURA TIO N S A VA ILA BLE:

TRA ILER O PTIO N S

O il& Gas Exploration O ffH ighw ay Fire Fighting Seism ic Silviculture/Site Preparation Electric and Pow erline M aintenance A griculture

• Basic “m ounting railrearfram e” KM C Torsion Bar Suspension trailer available • 7½ ’x 10’flatdeck • Custom attachm ent,on the deck/railsystem or on the front ofthe Carrier

KMC Hotline: 1 - 800 - KMC - 5303 606 Lakeside Dr., Nelson, B.C., Canada V1L 5S7 Ph. (250) 352-5303 / Fax (250) 352 -5302

Printed in Canada

The KM C SO FT TRA CK SKIDDER has Three M A JO R Design A dvantages over Conventional Ground Skidding

BA LA N CED W EIGHT DISTRIBUTIO N



Because of the forw ard m ounting of the pow er train, and the skidder’s ability to carry the log load w ellforw ard on the m achine,the com bined w eight of the vehicle and its payload is spread over the entire length ofthe tracks.

Ten torsion bars attached individually to roadarm s provide the sprung suspension. Each set ofroad w heels can m ove up and dow n independently,thereby allow ing the tracks to conform to uneven surfaces.

Cast Steel track pads, connected w ith patented rubberbushed steel pins, perm it track flexibility w hile preventing m etal-to-m etal w ear and track contam ination from

The KM C 2400 is designed to haulm edium and large tim ber in virtually any operating conditions.The choker arch extends hydraulically tow ard the load,then retracts as the load is w inched in,lifting the butts onto the rear deck ofthe m achine,close to its center ofgravity. This elim inates butt dozing,and aids in balancing the w eight distribution w hich results in better traction,higher speeds,greater productivity and consistent low Dynam ic ground pressure. KEY O PERA TIO N A L DA TA


M axim um Payload: 35,000lbs (15,873kg) M axim um W eight on Vehicle: 21,000lbs (9,524kg) Gross Vehicle W eight: 30,700lbs (13,923kg)

• • • • • •

Ground Pressure: 5.29psiat 0” soilpenetration 4.78psiat 6” soilpenetration

Steep Slopes W et or Boggy A reas Sensitive Soils Big W ood Long Skids SpecialM anagem ent Zones

SPECIA L O PTIO N

IN TEGRA TES W ELL W ITH

Pin-O n Grapple A ttachm ent

• Cable Yarders • H elicopter Logging


Printed in Canada

The KM C SO FT TRA CK SKIDDER has Three M A JO R Design A dvantages over Conventional Ground Skidding m achines.

BA LA N CED W EIGHT DISTRIBUTIO N



Because of the forw ard m ounting of the pow er train, and the skidder’s ability to carry the log load w ell forw ard on the m achine, the com bined w eight of the vehicle and its payload is spread over the entire length of the

Ten torsion bars attached individually to roadarm s provide the sprung suspension. Each set ofroad w heels can m ove up and dow n independently,thereby allow ing the tracks to conform to uneven surfaces.

Cast Steel track pads, connected w ith patented rubberbushed steel pins, perm it track flexibility w hile preventing m etal-to-m etal w ear and track contam ination from soils.

The KM C 2600 is a m ore versatile skidder,equipped w ith a sw inging boom skidding grapple. A ble to pick up loads on either side ofthe m achine and w ellto the rear,the KM C 2600 is particularly effective on steep slopes,w et and m uddy areas,or on sensitive soils. The 2600 is better suited to hand-felled w ood than the conventionalM odel2500 Fixed A rch Grapple. Excellent productivity w ith pre-bunched w ood on Steep Slopes or W et Ground. The Sw ing Grapple can help m aneuver logs around standing trees and be used to shift the w eight of the m achine w hen w orking on very soft ground or steep slopes. Bringing the load forw ard onto the m achine aids in balancing the w eight distribution w hich results in better traction,higher speeds,greater productivity and consistent low Dynam ic ground pressure. KEY O PERA TIO N A L DA TA


M axim um Payload: 30,000lbs (13,605kg) M axim um W eight on Vehicle: 18,000lbs (8,163kg) Gross Vehicle W eight: 37,180lbs (16,862kg)

• • • • •

Ground Pressure: 6.40psiat 0” soilpenetration 5.79psiat6” soilpenetration

Steep Slopes Broken Ground W et or Boggy A reas Sensitive Soils SpecialM anagem ent Zones

IN TEGRA TES W ELL W ITH Grapple: Young M odel172, w ith 90” bunching tongs

• W heelSkidders • Clam Bunks/CTL • Cable Yarders


Printed in Canada

BOTEX Grapple-Skidders : The cost-effective system for timber extraction for the farmer and small estate. The tractor-mounted skidder can be used to extract or move the timber. These skidders offer a quick and easy way to move large quantities of timber at a very economical price without the driver having to leave his cab. The grapple connecting link to the main boom is free to rotate with a built in self-aligning action, relieving any stress on the steering and ensuring that the operator retains full control of the tractor. All hoses are 3/8" (10mm.) double-braided with standard BSP fittings. The tractor is reversed so that the A-frame is just over the end of the load to be transported, the three-point linkage then being able to lift the front part of the whole load clear of the ground. The weight carried is in proportion to the weights fitted to the front of the tractor. When extracting timber by the general skidding-out of long tree lengths, the grapple is set near the butt end, to allow room for turning and steering the tractor. The grapples are the same successful types used on BOTEX cranes and loaders. For further details, contact us by e-mail, fax or telephone.

Examples of the Grapple-Skidder range available

Standard 3-point linkage

Extending Boom (3-point linkage)

Heavy duty grappleskidder

Inverted grapple (Clam Bunk)

Standard 3-Point Linkage model : Fitted with G.25 grapple which opens to 41" (1050 mm.) between the points and has a 3" (75 mm.) hydraulic ram. Alternatively, one of the following can be fitted :G35 min. opening between the points 48"

(1220 mm.) 3½" (88 mm.) ram.

G45 min. opening between the points 54"

(1370 mm.) 3½" (88 mm.) ram.

G45L min. opening between the points 63" (1600 mm.) 3½" (88 mm.) ram. Extending Boom 3-Point Linkage model : Fitted with G.35 grapple which opens to 48 mm. (1020 mm.) between the points and has a 3" (75 mm.) hydraulic ram. Alternatively, one of the following can be fitted :G45 min. opening between the points 54" (1370 mm.) 3½" (88 mm.) ram. G45L min. opening between the points 63" (1600 mm.) 3½" (88 mm.) ram. Heavy Duty model : This bolts onto the tractor back axle with adaptor plates (these varying according to tractor type) to give a high ground clearance. The hydraulically-operated boom has a 90° slewing arc, and is powered both up and down. The boom has a housed length of 1.5 metres, going to a full 2.3 metres at full hydraulic extension. The grapple can thus be easily raised to reach brushwood stacks 2 metres high and wide, the grapple compressing this into the one load. The 4-way double-acting spool valve block is protected by a main pressure relief valve. Service line pressure relief valves are also fitted to the slewing and lift rams. A fullprotection guard is fitted to the main lift ram. Inverted Grapple Skidder (Clam Bunk) : Open grapple sizes : Max. width inside jaws 63" (1600 mm.). Max. width between tips 45"(1100 mm.). Depth : 45" (1100 mm.). This will close completely around a 7" (180 mm.) log. The grapple is operated by two hydraulic rams with balancing links, and one double-acting spool valve is required on the towing tractor. No wires or cables are required. The grapple is mounted on a turntable providing 90° slewing arc to left and right, permitting turning without placing extra strain ob the towing equipment. The grapple mounting also permits 10° forward ar movement, of importance when crossing slopes, ditches, etc. The turntable is mounted on an 'A' frame chassis 8'3" (2.5 metres) long, supported by a high clearance axle beam fitted with two 400 x 15.5 x 14-ply tyres. There is no limit to the weight or length of timber being skidded, other than the maximum 6.5 tonne loading downward pressure on the grapple.

This inverted grapple-skidder is usually towed behind a forwarding tractor fitted with a roof mounted crane. This crane allows the operator to load and unload the the skidder without leaving the safety of the cab. The inverted grapple-skidder is also suitable for skyline work,where the loads can be dropped directly onto the inverted skidder and then towed and unloaded by any tractor (with or without a fitted crane) to keep the skyline landing area clear. The rear of the chassis is fitted with an extended crossmember specially designed for cab-mounted cranes, to lift the whole skidder assembly off the ground when reversing unloaded up difficult steep terrain.

Return to Index Go to Î

Delimbers Feller Bunchers

SMALLWOOD II

Forwarders Grapples Harvesters Harvesting Heads Log Loaders Masticators Processing Winches Yarders