Soft Cells data sheet - Kvadrat

61 downloads 130 Views 290KB Size Report
Kvadrat Soft Cells. Soft Cells - the original version - rely on two layers of tensioned textile to control sound. Typically, this version offers Class-C sound ...
Kvadrat Soft Cells Soft Cells - the original version - rely on two layers of tensioned textile to control sound. Typically, this version offers Class-C sound absorption. At a glance The patented aluminium frame has a hidden tensioning mechanism, which ensures that the covering textile stays perfectly taut Thanks to the tensioning mechanism, the textile covering is unaffected by changes in temperature and humidity Suitable for all kinds of interior The textile tension of each frame can be individually adjusted Easy to mount on walls and ceilings - at any angle Can be manufactured in large sizes Corner insert prevents folds and creases Selection of eight standard fabric coverings, offering a total of 267 different colours Can easily be taken down, reassembled and reupholstered to meet changing requirements. Optimum coverage of the 1000-Hz frequency range, Class C sound absorber All Soft Cells systems installed by our Certified White-Glove Technicians are covered by a 10-year technical guarantee The Soft Cells specialists and architectural support work closely with the architects in developingcustomised solutions

Technical data Applications Interior walls and ceilings Structural form Single-sided, double-layer tensioned textile, air cavity 18 mm Dimensions From 200x200 mm to 2100x6000 mm, depending on choice of textile (textile width of 200 mm = maximum panel width) System depth Wall-mounted version: 55 mm from installation surface. Ceiling-mounted version with magnet: 55 mm from installation surface. Ceiling-mounted version with steel wire: min. 120 mm Frame profile Aluminium hollow section profile, height: 36 mm Frame colour Silver anodised Mounting system Walls: magnets or C-section profiles Ceilings: magnets or steel wire Textile Standard fabric collection: Topas 2, Pro 2, Toto, Time 300, Remix 2, Divina 3, Greenfield, Highfield and Zap. All textiles have been tested for sound absorption according to EN ISO 354 Acoustic felt Incorporated 18 mm behind covering textile The covering fabric and acoustic felt filter sound System is based on the reflection of sound Distance to ceiling/wall: max. 200 mm

Acoustic performance The graph shows the sound absorption coefficients for Kvadrat Soft Cells when used as wall absorbers, with a depth of 55 mm:

Sound absorption coefficient

1.2 1.0 0.8 0.6 0.4 0.2

0

100

125

160

200

250

315

400

α w 0.45

500

630

800

1000 1260 1600 2000 2500 3160 4000 5000

Frequency, Hz

Ceiling absorbers, 200 mm depth

Sound absorption coefficient

1.2 1.0 0.8 0.6 0.4 0.2

0

100

125

160

200

250

α w 0.7

315

400

500

630

800

1000 1260 1600 2000 2500 3160 4000 5000

Frequency, Hz

The textile chosen, Toto, typifies the performance of most acoustically tested Soft Cells textiles. Acoustic results for specific textiles can be supplied upon request, or downloaded from www.softcells.com

Cross-section Kvadrat Soft Cells, Mounting type: magnet, Wall mounting: depth 55 mm

Top view Holding plate End cap

Magnet

Wall

Textile layer

Kvadrat SC frame

Accessories Magnets allow for the dismantling of panels without tools Suitable for mounting on walls and ceilings. Material: pot magnet, steel. Overall depth of the panels from the face of the installation surface: 55 mm Steel wire for ceiling mounting where a suspended ceiling is required. Material: stainless steel wire. Minimum dimension of the front side of the panel to the installation surface: 120 mm Brackets and magnets for mounting on ceilings where access from above is required. Material: steel, pot magnet. Dimensions from the front side of the Soft Cells to the installation brackets: 90 mm End caps for covering the small gap between wall and Soft Cells. Material: aluminium. Width: 55 mm, length adjusted to length or width of Soft Cells, max. 3000 mm in one piece