PCB Mount Solid State Relays - AC Output. DPA. 1Amp ... Crydom's DPA solid
state relays are compact 16-pin DIP packages that are ideal for high density ...
Solid State Relays & Contactors
The Global Expert in Solid State Switching Technology
Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Solid State Contactors, and specializes in custom designed solid state switching solutions for any load control application. Crydom is a brand of Sensata Technologies.
www.crydom.com
Sensata Technologies is one of the world’s leading suppliers of sensing, electrical protection, control and power management solutions with operations and business centers in 13 countries. Sensata’s products improve safety, efficiency and comfort for millions of people every day in automotive, appliance, aircraft, industrial, military, heavy vehicle, heating, air-conditioning and ventilation, data, telecommunications, recreational vehicle and marine applications. For more information please visit Sensata’s website at:
www.sensata.com
AC
About this catalog... Page 8
C
D
E
F
H
J
K L
Page 35
DC
PCB Mount
AC
G
one, two or three single or dual SSRs, or one threephase SSR. Installing a CN Series SSR in a socket that does not have matching input/output specifications may result in non-operation or damage to either the SSR, socket or both. See socket-relay compatibility table available in CN Series SSR datasheet. In addition to the possible combinations shown in the part number nomenclature, any standard Crydom PCB Mount SIP type SSR with similar pin centers can be offered as an assembly. Listed agency approvals may not apply to all part numbers available within a series. To determine agency approvals for a specific part number contact Crydom Technical Support. Required external heat sink for all ratings. Heat sink includes the necessary hardware to mount the relay(s) onto the heat sink. The number of hardware kits (HK1 or HKM1) included depends upon the number and type of SSRs possible to install on each heat sink.
DIN Rail Mount Page 47
DC
B
All dimensions in drawings are in inches [millimeters] and are for reference only. Dimensional drawings shown are for illustrative purposes only. They do not represent the complete variety of products within each series. For complete dimensional drawings for a particular Crydom product visit the CAD Drawings section in the Crydom website. Part Number Nomenclature is color coded as follows: Required for valid part number For options only and not required for valid part number Not all part number combinations are available. Contact Crydom Sales Support for information on the availability of a specific part number. Safety agency approvals for SSR/Heat Sink Assemblies may vary depending upon selected SSR. Heat sinks do not require safety agency approval. The standard Crydom SSR/Heat Sink Assemblies are either DIN Rail or Panel Mounted depending upon model selected and are available with either
AC
A
AC
The following conditions are applicable to product families where specifically noted:
DC
Panel Mount
Plug-In Mount Page 66
Assemblies Page 71
Accessories Page 73
DC
Products included in this catalog are only part of the Crydom offer of Solid State Relays and Contactors. To facilitate the use of this catalog, products have been categorized into 6 product groups mainly defined by mounting type.
What is a Solid State Relay/Contactor? A Solid State Relay or Contactor (SSR or SSC) is an electronic component that switches Power (AC or DC current) to a load circuit and provides electrical isolation between an application’s control circuit and load circuit. It is a competitive technology to Electromechanical Relays (EMRs) and other switching technologies such as Mercury Displacement Relays (MDRs) and discrete component assemblies.
Trigger Circuit
Switch
0
Control
Why use Solid State Switching Technology? DEC
Long life
Compatibility with control systems
Quiet operation
Fast switching
Minimum electrical noise
Position insensitive
Low power consumption
kg
Reduced weight
Shock & vibration resistant
Magnetic noise immunity
Ideal for harsh environments
Reduced energy cost
Applications Although there are literally thousands of individual uses for Solid State Relays and Contactors, most can be categorized into the following applications: Includes elevators, lifts, hoists, exercise equipment, conveyor systems, solar trackers, fans, solenoid and valve control. Benefits: Endurance, shock & vibration resistance, Soft Start, reversing, no arcing, fast switching, long life, no maintenance, easy to interface, reduced parts count. This encompasses the largest segment of solid state relay users. Applications include, but are not limited to: professional food equipment, plastic molding/extrusion machinery, HVAC&R and soldering equipment. Benefits: Long life, no maintenance, safe product, easy to interface, as well as enabling temperature accuracy. Suitable for heater, fan, blower and valve control. Includes power supplies, transformers, regulators, inverters, converters, UPS systems, etc. as well as any load that is not specifically for heating, lighting or motion control. Benefits: Long life, silent operation, high speed switching, endurance, mechanical shock and vibration resistance, position insensitive, logic compatibility, arc and bounce free switching, and low electromagnetic emissions. These applications are usually broken down into three categories: theatrical, warehouse and commercial. Many of the products used in this segment are custom designed. Benefits: Dimming, silent operation, fast switching, long life, no maintenance, safe product, easy to interface, reduced parts count.
Solid State Relays versus Solid State Contactors Crydom has been well known for over 40 years as a supplier of Solid State Relays (SSRs). However, Crydom also designs, manufactures and markets Solid State Contactors (SSCs). What is the difference between SSRs and SSCs?
engineers immediately think of Solid State “Contactors”, not Solid State “Relays”. So they are disposed to consider SSCs rather than SSRs despite the fact that SSRs can perform exactly the same switching function as a Contactor.
Remarkably, there is very little actual difference. They use similar power semiconductors and control circuits, and in some cases, even the same housings. SSRs, being considered as components, are applied in a large variety of applications and uses. SSCs, are generally applied in 3 phase AC heater and motor control applications although the SSCs themselves can be used successfully in almost any load control application. Why then are they viewed and applied differently?
Ratings
There are two main reasons: Tradition and Ratings.
Tradition
is that for most AC power control applications utilizing 3 phase AC power and some DC applications, traditional mechanical contactors are employed. (Note: mechanical contactors rated to switch AC loads are quite different from those rated for DC loads of similar currents due to the arcing and contact degradation associated with making and breaking a DC circuit). Therefore when the need arises to use solid state technology in these type applications rather than EMRs,
of contactors, whether Solid State or Mechanical, always include allowed motor load ratings and allowed resistive load ratings. The reason for this is again tradition because for most mechanical contactors, the switching capabilities and life expectancy vary significantly for each type of load. Further, motor control requires consideration of such aspects as Locked Rotor Rating, Full Load Current Ratings and Horse Power Rating, while resistive load ratings must account for significant inrush current that also degrades mechanical contacts. SSRs and SSCs don’t suffer the same type degradation due to load characteristics as mechanical contacts do and therefore the motor and resistive load ratings are not as widely different. However the one significant differentiator is that to be considered a contactor, the SSR or SSC must be evaluated to and carry ratings appropriate for motor control. So in summary, the major technical difference between an SSR and SSC has to do with the mandatory motor ratings required to be defined as a “Contactor”.
Panel Mount Crydom Panel Mount Solid State Relays and Contactors are designed to easily mount on panels or heat sinks for applications which require single, dual or 3 phase output ratings in the range of 5 to 125 Amps at 24 to 660 VAC or 1 to 160 Amps at 1 to 1000 VDC. Available inputs include 24 to 280 VAC, 3 to 32 VDC or analog control depending upon model. Offered in several configurations including three industry standard size and mounting styles, Crydom Panel Mount SSRs and Contactors provide both an easy means to mechanically secure them in equipment and provide a reliable thermal path to dissipate thermal energy. Models and options include screw termination, quick connections, optional protective covers, input indicator LEDs and thermal interface pads, as well as heat sinks and SSR/Heat Sink Assemblies. See the product pages for a summary of available ratings, features and Safety Agency approvals. Visit the SSR Accessories and Assemblies sections of the catalog or the Crydom website for additional information on Crydom SSRs, Contactors and available accessories for Panel Mount SSRs, Contactors and Assemblies.
AC Output Page Series
Description
9 10 11 12 13 14 15 16
Series 1 HA/HD Series H1 CW CSW CL EL EZ
530 V
17 18 19 20 21
MCBC MCPC PCV LPCV SMR-6
Burst Ctrl
5
Rating Amps 10 12 15 18 20 25 40 50 75 90 110 125 Solid State Relays
530 V 690 V HD 660 V HD 280 V Econ 280 V Mini 280 V Low Pro 660 V Control Solid State Relays Phase Ctrl V in Phase Ctrl Linear Ph Ctrl Monitoring Solid State Dual Relays
22 Evolution Duals 23 Series 1 Duals
Screw Term
24 53TP 25 53RV
3 Phase
Quick Connect Solid State Contactors Reversing
DC Output Page Series
26 27 28 29 30 31 32
DC60 D06D PowerPlus DC Series 1 DC EL SSC LVD
Description
3
5
7
Rating Amps 10 12 20 25 40 60 80 100 120 160 Solid State Relays
1 - 60 V Econ 1 - 60 V 1 - 500 V 1 - 400 V Mini 1 - 100 V 1 - 1000 V Disconnect Solid State Contactors
33 DP 34 HDC
Reversing High Current
PANEL MOUNT • AC Output • Relays
6] 2.
5]
[2
4.
89
[4 75 1.
heavy industrial applications
PCB Mount
• Flexible 3-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage • Elective “ultra-low” input current draw (2-4 mAmps DC typical, “T” suffix option) • Optional output R-C Snubber for additional dv/dt attenuation • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output
• Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal
2.2
5[
compound using the “H” suffix • Optional Normally Closed output (“-B” suffix option) • UL 508 overload endurance rated and 100 kA Short Circuit Current Rating (SCCR) K
3]
4
A
Output Frecuency Blank: 47-440 Hz 4: 400 Hz (12 & 24 suffixes only)
12
10
Operating Voltage 12: 24-140 VAC 24: 24-280 VAC 48: 48-530 VAC
E
K
P
G
Rated Load Current Termination 10: 10 Amp Blank: Screw (12 & 24 suffixes only) F: Quick Connect 25: 25 Amp (Single pair 40: 40 Amp (12 suffix only) [up to 25 Amp] 50: 50 Amp Double pair [50 Amp]) (24 & 48 suffixes only) K: Installed standoffs for 75: 75 Amp PC Board mounting (24 & 48 suffixes only) 90: 90 Amp (24 & 48 suffixes only) 110: 110 Amp (24 suffix only) 125: 125 Amp (24 suffix only)
Complete specifications of these & other Crydom products available at: www.crydom.com
S
Input Status LED (12 & 24 suffixes only) Blank: Not Included G: Included
H
T
Thermal Pad Blank: Not Included H: Included
-10
-B
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
Plug-In Mount
Overvoltage Protection (12 & 24 suffixes only) Blank: Not Included P: Included
Output Type Blank: Normally Open -B: Normally Closed (12 & 24 suffixes only. Snubber included, not available with -10 option)
Assemblies
Control Voltage A: 90-280 VAC D: 3-32 VDC (4-32 VDC for 48 suffix) AxxxxE: 18-36 VAC (12 & 24 suffixes only)
Trigger Circuit Blank: Phototriac Snubber T: Low Current Blank: Not Included Phototransistor S: Included (Not needed with (Not needed with T suffix, -B suffix, included included as standard) as standard)
Accessories
J
3.
D
[2
C
92
B
.2]
0.
Notes: A
57
DIN Rail Mount
• Crydom’s Signature family of Solid State Relays • Ratings from 10 to 125 Amps @ 24-280 VAC and from 25 to 90 Amps @ 80-530 VAC • Back-to-back SCR output provides added reliability in commercial and
Panel Mount Panel Mount AC
10-125 Amps
0.
Series 1
9
PANEL MOUNT • AC Output • Relays HA/HD Series
2.
5]
[2
4.
89
[4 75
heavy industrial applications
PCB Mount
• Flexible 4-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage
• Elective “ultra-low” input current draw (2-4 mAmps DC typical, “T” suffix option) • R-C Snubber network for additional dv/dt attenuation (for HA48/HD48 models only) • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output
• Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage
2.2
5[
Plug-In Mount Assemblies
Series
H
Control Voltage A: 90-280 VAC D: 4-32 VDC AxxxxE: 18-36 VAC
A
48
3]
J
K
3.
D
[2
C
Overvoltage Protection Blank: Not Included P: Included
25
Accessories
Operating Voltage 48: 48-530 VAC 60: 48-660 VAC
E
K
Rated Load Current 12: 12 Amp (48 suffix only) 25: 25 Amp 50: 50 Amp 75: 75 Amp (48 suffix only) 90: 90 Amp 110: 110 Amp (48 suffix only) 125: 125 Amp
.2]
92
B
57
0.
DIN Rail Mount
Protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix • UL 508 overload endurance rated and 100 kA Short Circuit Current Rating (SCCR) Notes: A
10
1.
0.
Panel Mount Panel Mount AC
• Solid State Relay with ratings from 12 to 125 Amps @ 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and
6]
12-125 Amps
P
G
Snubber Blank: Not Included S: Included Trigger Circuit (Hx48xx and Hx48xxT only Blank: Phototriac Not needed with T suffix, T: Low Current included as standard) Phototransistor
S
Termination Input Status LED Blank: Screw Blank: Not Included F: Quick Connect G: Included (Single pair [up to 25 Amp] Double pair [50 Amp]) K: Installed standoffs for PC Board mounting
H
T
Thermal Pad Blank: Not Included H: Included
-10 Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Relays Panel Mount Panel Mount AC
25-125 Amps
PCB Mount
• Solid State Relay with ratings from 25 to 125 Amps @ 48-690 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Flexible 4-32 VDC Control Voltage • Low output off-state leakage current (2WD & 6WD suffixes only, snubberless)
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection (2D & 2WD suffixes only) • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix • UL 508 overload endurance rated and 100 kA Short Circuit Current Rating (SCCR)
DIN Rail Mount
K
Assemblies Page 71
2WD
48
25
K
6] [2 2. 9
P
G
H
-10 2.2
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
5[
57
.2]
0. 9
2
Termination Input Status LED Operating Voltage Blank: Not Included 48: 48-530 VAC (2D suffix only) Blank: Screw G: Included 48-660 VAC (2WD suffix only) F: Quick Connect (Single pair [25 Amp] 60: 48-690 VAC (6WD suffix only) Double pair [50 Amp]) K: Installed standoffs for PC Board mounting
0. 8
Overvoltage Protection (2D & 2WD suffixes only) Thermal Pad Blank: Not Included Blank: Not Included P: Included H: Included
Assemblies
H1
Page 73
]
Series
Rated Load Current 25: 25 Amp 50: 50 Amp 75: 75 Amp Transient Overvoltage 90: 90 Amp 2D: 1200 Vpk (with Snubber) 2WD: 1200 Vpk (without Snubber) 125: 125 Amp (2D & 2WD suffixes only) 6WD: 1600 Vpk (without Snubber)
Compatible Accessories
Plug-In Mount
J
.3
D
[2 3
C
[4 4. 5]
B
1. 75
Notes: A
Accessories
Series H1
Other Crydom Motion Control solutions available at: motion.crydom.com
11
PANEL MOUNT • AC Output • Relays CW Series
10-125 Amps
Panel Mount Panel Mount AC PCB Mount
20-48 VDC
• Heavy duty Solid State Relay with ratings from 10 to 125 Amps @ 24-280 VAC or 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments • Flexible 3-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage and universal AC/DC control of 20-280 VAC and
DIN Rail Mount
• LED indicator for easy identification of control status • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • IP20 “touch safe” Cover provides additional user protection • Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix • UL 508 overload endurance rated and 100 kA Short Circuit Current Rating (SCCR) Notes: A
B
C
D
J
K
Plug-In Mount
Assemblies Page 71
Compatible Accessories Page 73
48
50
Accessories
Operating Voltage 24: 24-280 VAC 48: 48-660 VAC
] 2. 9 [3 1.
29
E
Rated Load Current 10: 10 Amps 25: 25 Amps 50: 50 Amps 90: 90 Amps 125: 125 Amps
P
H
-10
Overvoltage Protection Blank: Not Included P: Included
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
]
8.3
0 [5
2.3
5]
U
1. 7
5
CW
Thermal Pad Blank: Not Included H: Included
[4 4.
Assemblies
Series
Control Voltage A: 90-280 VAC D: 3-32 VDC (4-32 VDC for 48 suffix) U: 20-48 VDC or 20-280 VAC AxxxxE: 18-36 VAC
12
Other Crydom Motion Control solutions available at: motion.crydom.com
PANEL MOUNT • AC Output • Relays Panel Mount Panel Mount AC
10-90 Amps
PCB Mount
• Heavy duty Solid State Relay with ratings from 10 to 90 Amps @ 24-280 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments • Flexible 3-32 VDC Control Voltage
B
C
D
J
K Assemblies Page 71
Compatible Accessories
Plug-In Mount
Notes: A
DIN Rail Mount
• Low output off-state leakage current (without option “S”) • Elective R-C Snubber network for additional dv/dt attenuation (option “S”) • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase-control or inductive loads) output • Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix • UL 508 overload endurance rated and 100 kA Short Circuit Current Rating (SCCR)
10
K
G
Overvoltage Protection Blank: Not Included P: Included
S
1. 75
[4 4. 5]
[2 2. 9 0. 8
H
Snubber Blank: Not Included S: Included
-10 2.2
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
5[
57
.2]
0. 9
2
[2 3
Rated Load Current 10: 10 Amp 25: 25 Amp 50: 50 Amp 75: 75 Amp 90: 90 Amp
P
Assemblies
24
]
CSW
Thermal Pad Blank: Not Included H: Included
.3
Series
Operating Voltage 24: 24-280 VAC
6]
Page 73
Termination Blank: Screw F: Quick Connect (Single pair [up to 25 Amp] Double pair [50 Amp]) Input Status LED K: Installed standoffs for Blank: Not Included PC Board mounting G: Included
Accessories
CSW Series
Complete specifications of these & other Crydom products available at: www.crydom.com
13
PANEL MOUNT • AC Output • Relays CL Series
5-10 Amps
Panel Mount Panel Mount AC PCB Mount
• Economical Solid State Relay with ratings of 5 or 10 Amps @ 24-280 VAC • Optional IP20 “touch safe” Cover for additional user protection • Economical Triac based construction • LED indicator for easy identification of control status
• Regulated AC or DC Control Voltage • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output
Notes: A
B
C
D
J
K
DIN Rail Mount
Assemblies Plug-In Mount
Page 71
Assemblies Accessories
14
Compatible Accessories
Control Voltage A: 90-250 VAC D: 3-32 VDC
Series
CL
240
A
Load Voltage 240: 24-280 VAC
10
.5 ] [4 4 1. 75
0. 89
[2 2
.5 ]
Page 73
Switching Type Thermal Pad Blank: Zero Voltage Blank: Not Included Turn-On R: Instantaneous Turn-On H: Included
R
Rated Load Current 05: 5 Amps 10: 10 Amps
C
H
Cover Blank: Not Included (IP00) C: Included (IP20)
2.2
5[
57
.2]
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Relays 5-20 Amps Panel Mount Panel Mount AC
EL Series
PCB Mount
• Mini-puck Solid State Relay to maximize panel space • Ratings up to 20 Amps @ 24-280 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or
inductive loads) output
• Quick Connect control & output termination for easy installation • 3.75k VAC optical isolation B
C
D
J
K DIN Rail Mount
Notes: A
0[
4. 3] [1 57 0. 46
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
]
1.4
0.
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
[6 .4
05
[1 1. 7]
Output Voltage 240 A: 24-280 VAC
R
25
5
0.
240A
.3 ]
EL
[4
Series
Control Voltage 05: 4-8 VDC 12: 10-14 VDC 24: 21-27 VDC
0. 17
Rated Load Current 5: 5 Amps 10: 10 Amps 20: 20 Amps
0. 83
[2 1. 1]
Page 83
Plug-In Mount
Thermal Pad
Page 71
35
.6]
Accessories
Assemblies
15
PANEL MOUNT • AC Output • Relays EZ Series
5-18 Amps
Panel Mount Panel Mount AC PCB Mount
• Low profile Solid State Relay • Ratings from 5 to 18 Amps @ 24-280 VAC or 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Elective R-C Snubber network (240 VAC models) for additional dv/dt attenuation
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • AC or DC Control Voltage options • Quick Connect control & output termination for easy installation Notes: A
B
C
D
J
K
DIN Rail Mount
EZ
E
240
A
Accessories
Operating Voltage 240: 24-280 VAC 480: 48-660 VAC
12
[1 7
2. 62
[6 6
.5 ]
0. 5
S
Rated Load Current 5: 5 Amps (EZ240D suffix only) 12: 12 Amps 18: 18 Amps
R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
5
[6
.4
]
Snubber Blank: Not Included S: Included (240 suffix only) 0. 2
Assemblies
Series
4.
4]
Plug-In Mount
16
Control Voltage D: 3-15 VDC (4-15 for 480 suffix) A: 90-140 VAC ExxxA: 18-36 VAC ExxxD: 15-32 VDC
1.5
0[
38
.0]
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays 25-90 Amps Panel Mount Panel Mount AC
MCBC Series
PCB Mount
• Microprocessor based burst fire controller / SSR • Ratings from 25 to 90 Amps @ 48-530 VAC • R-C Snubber network for additional dv/dt attenuation • Industry standard analogue input (voltage or current) or potentiometer control
• LED indicator for easy identification of output status • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Two time-base periods available (10 & 20 cycles) • Designed to provide proportional AC power to a wide range of resistive loads B
D
J
K
DIN Rail Mount
Notes: A
Page 71
MC
BC
24
C
Rated Load Current 25: 25 Amps 50: 50 Amps 90: 90 Amps
F
.2 ] [4 5 1. 78
]
8.7
1 [5
2.3
Time Base Period F: 10 AC Cycles L: 20 AC Cycles
1. 19
[3
0. 0
]
Product Type BC: Burst Fire Controller
25
Assemblies
Series
Accessories
Line Voltage 12: 48-140 VAC 24: 180-280 VAC 48: 300-530 VAC
Analog Control Signal A: 0-5 VDC B: 0-7 VDC C: 0-10 VDC D: 4-20 mA E: Internal Potentiometer
Page 74
Plug-In Mount
Assemblies Protective Cover
Complete specifications of these & other Crydom products available at: www.crydom.com
17
PANEL MOUNT • AC Output • Control Relays MCPC Series
25-90 Amps
Panel Mount Panel Mount AC PCB Mount
• Microprocessor based phase angle controller / SSR • Ratings from 25 to 90 Amps @ 48-530 VAC • R-C Snubber network for additional dv/dt attenuation • Industry standard analogue input (voltage or current) or potentiometer control for setpoint
• LED indicator for easy identification of output status • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Designed to provide proportional AC power to a wide range of resistive loads Notes: A
B
D
J
K
DIN Rail Mount
Assemblies Protective Cover
Assemblies
Line Voltage 12: 48-140 VAC 24: 180-280 VAC 48: 300-530 VAC
Series
PC
24
25
C
.2 ] [4 5
Analog Control Signal A: 0-5 VDC B: 0-7 VDC C: 0-10 VDC D: 4-20 mA E: Internal Potentiometer ]
8.7
1 [5
2.3
Accessories
Rated Load Current Product Type PC: Phase-Angle Controller 25: 25 Amps 50: 50 Amps 90: 90 Amps 1. 19
[3
0. 0
]
MC
Page 74
1. 78
Plug-In Mount
Page 71
18
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays 15-90 Amps Panel Mount Panel Mount AC
PCV Series
B
D
J
K
Page 71
Compatible Accessories
10
PCV
Control Voltage 7: 2-7 VDC 10: 2-10 VDC
24
2] [4 5. 8
Operating Voltage 24: 100-240 VAC
Assemblies
Series
1. 7
0.
87
[2
2. 0
]
Page 73
25 Rated Load Current 15: 15 Amps 25: 25 Amps 50: 50 Amps (10 prefix only) 75: 75 Amps (10 prefix only) 90: 90 Amps (10 prefix only)
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
• Easy to use proportional (phase angle) controller • Ratings from 15 to 90 Amps @ 100-240 VAC • Simple 2-7 VDC or 2-10 VDC analogue Control Voltage • Designed to provide proportional AC power to a wide range of resistive loads
19
PANEL MOUNT • AC Output • Control Relays LPCV Series
15-110 Amps
Panel Mount Panel Mount AC PCB Mount
• Easy to use linear proportional (phase angle) controller • Ratings from 15 to 110 Amps @ 20-300 VAC • Simple 0-5 VDC, 0-10 VDC or 4-20 mAmps analogue Control Voltage • Included 12 VDC source for use with external potentiometer control
• Requires accessory power supply PS120 or PS240 to provide 20 VAC for internal logic circuit • Designed to provide proportional AC power to a wide range of resistive loads Notes: A
B
D
J
K
DIN Rail Mount Plug-In Mount
Compatible Accessories
2.
19
[5
5. 5
]
Page 81
Series Assemblies
10
LPCV
24
25 Rated Load Current 15: 15 Amps 25: 25 Amps 40: 40 Amps 75: 75 Amps 110: 110 Amps
3.0
0[
5
0.2
] [6.4
76
.2]
1. 6
1
[4
0.
9]
Accessories
Control Voltage 5: 0-5 VDC 10: 0-10 VDC 20: 4-20 mAmps
Operating Voltage 24: 20-300 VAC
20
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays
• Normally Open or Normally Closed alarm output • Wide range of built-in fault condition monitoring alarms • Zero Voltage Turn-On (resistive loads) output • UL 508 overload endurance rated B
D
J
K
DIN Rail Mount
Notes: A
Assemblies
Protective Cover Page 74
24
25
]
8.7
1 [5
2.3
Features Input: Inverting or Non Inverting Alarm Output: Normally Open or Normally Closed
1.
37
[3
4.
7]
Operating Voltage 24: 60-280 VAC 48: 96-553 VAC
-6
Assemblies
Rated Load Current 25: 25 Amps 50: 50 Amps 90: 90 Amps
Accessories
SMR
1.
78
[4
5. 2
]
Page 71
Series
PCB Mount
• Solid State Relay with built-in current monitoring & diagnostics circuit • Ratings from 25 to 90 Amps @ 60-280 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Inverting or non-inverting Control Voltage (flexible 8-32 VDC)
Panel Mount Panel Mount AC
25-90 Amps
Plug-In Mount
SMR-6 Series
Complete specifications of these & other Crydom products available at: www.crydom.com
21
PANEL MOUNT • AC Output • Dual Relays Evolution Dual Series
25-50 Amps
Panel Mount Panel Mount AC PCB Mount
• Independently controlled dual output Solid State Relay • Ratings of 25 & 50 Amps @ 24-280 VAC or 48-600 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Optional IP20 “touch safe” Cover for additional user protection
• Flexible 4-32 VDC Control Voltage • Three Input Connector options for additional assembly flexibility • LED indicator for each output channel for easy identification of control status • Zero Voltage Turn-On (resistive loads) output
DIN Rail Mount
Notes: A
B
C
D
K
Input Connector options Connector 2
24
Accessories
Cover C: Included D: Not Included * Drawing shown on the right
25
W
Rated Load Current 25: 25 Amps 50: 50 Amps
2
V
H
Thermal Pad Input Connector 2: Key Locking Connector Blank: Not Included H: Included 3: 4 Pin Connector accepting Screw Terminals 4: 4 Pin Spring Terminal *
7] [4 5. 0 1. 8
]
8.3
0 [5
2.3
.4]
1 [5
0.2
]
D
5. 1
C
Control Voltage W: 4-32 VDC
[2
Series
Output Terminal Orientation U: A channel top, B channel bottom V: A channel on left, B channel on right
Connector 4
99
Assemblies
Operating Voltage 24: 24-280 VAC 48: 48-660 VAC
Connector 3
0.
Plug-In Mount
22
J
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Dual Relays Panel Mount Panel Mount AC
25-40 Amps • Independently controlled dual output Solid State Relay • Ratings of 25 Amps & 40 Amps @ 24-280 VAC or 48-530 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • 4-15 VDC or 15-32 VDC Control Voltage
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • Quick Connect termination; 120/240 V models (D24) include pin control termination • UL 508 overload endurance rated B
C
D
J
K
480 V Model
(D24)
Assemblies
(H12D48)
Heat Sinks & other Accessories
Page 71
H12D48
25
Operating Voltage D24: 24-280 VAC H12D48: 48-530 VAC
D
H
Control Voltage D: 4-15 VDC DE: 15-32 VDC
-10
.4 ] 0.
25
Series
Thermal Pad Blank: Not Included H: Included
[6
Rated Load Current 25: 25 Amps 40: 40 Amps
Assemblies
1.
78
[4
0.
5. 2
86
]
[2
1. 8
]
Page 75
2.3
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
1[
58
.7]
Accessories
120/240 V Model
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
Series 1 Duals
.9]
5 [8
0.3
Complete specifications of these & other Crydom products available at: www.crydom.com
23
PANEL MOUNT • AC Output • Contactors 53TP Series
25-50 Amps
Panel Mount Panel Mount AC PCB Mount
• 3 Phase Solid State Contactor with ratings of 25 & 50 Amps per phase @ 48-530 VAC • Up to 7.5 HP / 5.5 kW Motor Controller ratings • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
DIN Rail Mount
• Direct Bond Copper (DBC) substrate for superior thermal performance • R-C Snubber network for additional dv/dt attenuation • Flexible 4-32 VDC, 18-36 VAC or 90-140 VAC / 180-280 VAC Control Voltage • LED indicator for easy identification of control status • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output
• Optional IP20 “touch safe” Cover (shown) provides additional user protection • Internal TVS eliminates the need for external Overvoltage Protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix
• UL 508 overload endurance rated Plug-In Mount
Notes: A
B
C
D
J
K
Assemblies Page 71
Heat Sinks & other Accessories
4. 0
]
[3 5.
4. 09
[1 0
1. 4 7] [2 9. 17
Thermal Pad Blank: Not Included H: Included
Accessories
Control Voltage A: 90-280 VAC (without IP20 cover) B: 90-140 VAC (with IP20 cover) C: 180-280 VAC (with IP20 cover) D: 4-32 VDC E: 18-36 VAC (with IP20 cover)
D
H
Cover D: Not Included (IP00) C: Included (IP20)
-10
.6 ]
25
[1 04
53TP
4. 12
A
1.
Assemblies
Series
Rated Load Current 25: 25 Amps 50: 50 Amps
5]
Page 78
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
3.1
4[
2.8
9[
73
.5]
79
.8]
IP20
IP00
24
Other Crydom Motion Control solutions available at: motion.crydom.com
PANEL MOUNT • AC Output • Contactors Panel Mount Panel Mount AC
25-50 Amps • Motor Reversing Contactor with ratings of 25 & 50 Amps per phase @ 48-530 VAC • Up to 7.5 HP / 5.5 kW Motor Controller ratings • Built-in interlock circuit protects the relay/load if both Forward & Reverse inputs are
PCB Mount
simultaneously actuated
DIN Rail Mount
• Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments • Direct Bond Copper (DBC) substrate for superior thermal performance • R-C Snubber network for additional dv/dt attenuation • Flexible 4-32 VDC Control Voltage • LED indicators for easy identification of the Forward / Reverse control status • IP20 “touch safe” Cover provides additional user protection • A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix
• UL 508 overload endurance rated B
C
D
J
Assemblies Page 71
K
Heat Sinks & other Accessories Page 78
D
53
Control Voltage D: 4-32 VDC
RV
25
Cover C: Included
C
H
Rated Load Current/phase Thermal Pad 25: 25 Amps Blank: Not Included 50: 50 Amps H: Included
Other Crydom Motion Control solutions available at: motion.crydom.com
Assemblies
Series
Type RV: 3 Phase Motor Reversing SSR
4. 09
[1 0
4. 0
]
1. 40
[3 5. 5]
Notes: A
Plug-In Mount
3.1
4[
79
.8]
Accessories
53RV Series
25
PANEL MOUNT • DC Output • Relays DC60 Series
3-7 Amps
Panel Mount Panel Mount DC PCB Mount
• Economical bipolar transistor output Solid State Relay • Ratings up to 7 Amps @ 60 VDC • Available with either a Normally Open (standard) or Normally Closed (“-B” option) output • Flexible 3.5-32 VDC or 90-280 VAC/DC Control Voltage
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
Notes: A
B
C
D
J
K
DIN Rail Mount
Assemblies Plug-In Mount
Page 71
Assemblies Accessories
26
Compatible Accessories
2] [4 5. 1. 7
8
0.
87
[2
2. 0
]
Page 73
Series
DC60
Control Voltage S: 3.5-32 VDC SA: 90-280 VAC/DC
SA
3
Output Type Blank: Normally Open -B: Normally Closed
-B
Rated Load Current 3: 3 Amps 5: 5 Amps 7: 7 Amps
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays Panel Mount Panel Mount DC
60-100 Amps • Solid State Relay with low impedance MOSFET output to minimize total power dissipation • Ratings from 60 to 100 Amps @ 60 VDC • Easily paralleled for high current applications • Flexible 3.5-32 VDC Control Voltage
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed) B
D
J
K
Page 71
Compatible Accessories
.2 ] [4 5 1. 78
0. 87
[2 2. 0]
Page 73
D
Operating Voltage 06D: 0-60 VDC
06D
Assemblies
Series
60 Rated Load Current 60: 60 Amps 80: 80 Amps 100: 100 Amps
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
D06D Series
27
PANEL MOUNT • DC Output • Relays PowerPlus DC Series
10-100 Amps
Panel Mount Panel Mount DC
• Solid State Relay with ratings up to 100 Amps @ 60 VDC, 100 Amps @ 100 VDC, 60 Amps @ 200 VDC and 20 Amps @ 400 VDC
PCB Mount
• Flexible 4-32 VDC or 90-140 VAC Control Voltage • Optional IP20 “touch safe” Cover for additional user protection (option “C”) & thermal interface pad (option “H”)
• Optically isolated high speed trigger circuit for enhanced switching • Easily paralleled for high current applications • Low impedance MOSFET output minimizes total power dissipation • LED indicator for easy identification of control status • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be
DIN Rail Mount
diode suppressed)
• UL General Use (resistive) ratings Notes: A
B
C
D
J
K Assemblies
Plug-In Mount Assemblies
DC
100
A
Accessories
Operating Voltage 60: 7-48 VDC 100: 7-72 VDC 200: 7-150 VDC 400: 7-300 VDC
40
C
5] [4 4. 1. 7
5
[2 2.
Thermal Pad Blank: Not Included H: Included
9
Cover Blank: Not Included C: Included
0. 8
Control Voltage A: 90-140 VAC D: 4-32 VDC
5]
Page 73
Series
28
Compatible Accessories
Page 71
H
Rated Load Current 10: 10 Amps 20: 20 Amps (Not valid with 400A suffix) 40: 40 Amps (Not valid with 400x suffixes) 60: 60 Amps (Not valid with 200A, 400x suffixes) 80: 80 Amps (60D & 100D suffixes only) 100: 100 Amps (60D & 100D suffixes only)
2.2
5[
57
.2]
Other Crydom Motion Control solutions available at: motion.crydom.com
PANEL MOUNT • DC Output • Relays
• Solid State Relay with low impedance MOSFET output to minimize total power dissipation • Ratings up to 100 Amps @ 100 VDC, 40 Amps @ 200 VDC, 12 Amps @ 400 VDC,and 10 Amps @ 500 VDC • Easily paralleled for high current applications • Flexible 3.5-32 VDC Control Voltage
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed) B
D
J
K
Page 71
D
1D
2] [4 5. 8 1. 7
0.
87
[2
2. 0
]
Page 73
Assemblies
Series
Operating Voltage 1D: 0-100 VDC 2D: 0-200 VDC 4D: 0-400 VDC 5D: 0-500 VDC
Compatible Accessories
07 Rated Load Current 07: 7 Amps 10: 10 Amps (500 VDC only) 12: 12 Amps (not for 500 VDC) 20: 20 Amps (100 VDC only) 40: 40 Amps (100 & 200 VDC only) 60: 60 Amps (100 VDC only) 80: 80 Amps (100 VDC only) 100: 100 Amps (100 VDC only)
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
Panel Mount Panel Mount DC
7-100 Amps
PCB Mount
Series 1 DC
29
PANEL MOUNT • DC Output • Relays EL Series
5-10 Amps
Panel Mount Panel Mount DC PCB Mount
• Mini-puck Solid State Relay to maximize panel space • Ratings of 5 & 10 Amps @ 3-100 VDC • Easily paralleled for high current applications • Low impedance MOSFET output minimizes total power dissipation
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
• Quick Connect control & output termination for easy installation Notes: A
B
D
J
K
DIN Rail Mount
Assemblies
Page 83
1.4
0[
35
.6]
]
3] 4. [1 7 0. 5 [1 1. 7] 0. 46
Accessories
Output Voltage 100D: 3-100 VDC
05
0. 25
5
[4 .3
100D
17
EL
[6 .4
]
Series
Control Voltage 05: 4-8 VDC 12: 10-14 VDC 24: 21-27 VDC
0.
Assemblies
Rated Load Current 5: 5 Amps 10: 10 Amps
0.
83
[2
1. 1
]
Plug-In Mount
30
Thermal Pad
Page 71
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays 25 Amps • Solid State Relay with ratings of 25 Amps @ up to 1k VDC • High voltage IGBT output • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid B
D
J
K
Page 71
Compatible Accessories
.2 ] [4 5 1. 78
0. 87
[2 2. 0]
Page 73
SSC
1000 Operating Voltage 1000: 0-1000 VDC
25
Assemblies
Rated Load Current 25: 25 Amps
Series
24 Control Voltage 12: 8-16 VDC 24: 20-28 VDC 36: 32-40 VDC
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
coils must be diode suppressed)
Panel Mount Panel Mount DC
SSC Series
31
PANEL MOUNT • DC Output • Relays LVD Series
40-100 Amps
Panel Mount Panel Mount DC
• Low Voltage Disconnect with ratings up to 100 Amps @ 3-75 VDC • Monitors and automatically disconnects battery systems from loads at low voltage conditions to prevent
deep discharge of the batteries
PCB Mount
• Low impedance MOSFET output minimizes total power dissipation
• Six DC control ranges available for a variety of 12 VDC and 24 VDC battery systems Notes: A
B
C
D
J
K
DIN Rail Mount
Assemblies Plug-In Mount
Page 71
Assemblies Accessories
32
Compatible Accessories
Series
LVD
Operating Voltage 75: 3-75 VDC
75
A
40
2. 0
1. 7
8
[4 5.
2]
[2 87 0.
Rated Load Current 40: 40 Amps 60: 60 Amps Thermal Pad 80: 80 Amps Blank: Not Included 100:100 Amps H: Included
]
Page 73
H
Control Voltage Code A: 36 VDC max., Hysteresis 11.0-11.5 VDC B: 36 VDC max., Hysteresis 11.5-12.0 VDC C: 36 VDC max., Hysteresis 12.0-12.5 VDC D: 36 VDC max., Hysteresis 23.0-24.0 VDC E: 36 VDC max., Hysteresis 24.0-25.0 VDC F: 36 VDC max., Hysteresis 25.6-26.6 VDC
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Contactors DP Series
Panel Mount Panel Mount DC
20-60 Amps • Motor Reversing Contactor with ratings up to 60 Amps @ 48 VDC • Low impedance MOSFET switches in an H-Bridge configuration for motor reversing • Control features to combine Soft Start/Ramp Up, Soft Stop/Ramp Down & Braking functions
PCB Mount
on each polarity
DIN Rail Mount
K
Series
DP
4R
SB
Function 4R: 4 Channel DC Reversing
60
D
Operating Voltage 60: 48 VDC
Other Crydom Motion Control solutions available at: motion.crydom.com
40
B
Load Rated Current 20: 20 Amps 40: 40 Amps 60: 60 Amps
Compatible Accessories
Page 71
Plug-In Mount
Stop Mode Blank: Stop Mode matches Start Mode B2: Dynamic Brake, 0.2 sec B5: Dynamic Brake, 0.5 sec B8: Dynamic Brake, 0.8 sec B: Dynamic Brake, Continuous
Assemblies
Page 73
Assemblies
Start Mode Blank: Instant Start SA: Soft Start/Ramp Up, 0.2 sec Control Voltage SB: Soft Start/Ramp Up, 0.5 sec D: 4.5-15 VDC E: 18-32 VDC SC: Soft Start/Ramp Up, 1 sec
40 & 60 Amps Model
.0 ]
20 Amps Model
[1 04
J
9
D
4. 0
C
[3 5. 1]
B
1. 38
Notes: A
H Thermal Pad Blank: Not Included H: Included
2.8
9[
73
.5]
Accessories
• Built-in interlock circuit protects the relay/load if both Forward & Reverse inputs are simultaneously actuated • UL & IEC General Use & Motor Controller ratings • LED indicators for easy identification of the Forward / Reverse control status
33
PANEL MOUNT • DC Output • Contactors HDC Series
120-160 Amps
Panel Mount Panel Mount DC PCB Mount
• High current solid state contactor with rating up to 160 Amps @ 150 VDC • Single Pole Single Throw Normally Open Operation (SPST/N.O.) • Flexible 4.5-32 VDC or 90-140 VAC Control Voltage • Low impedance MOSFET output minimizes total power dissipation
• LED Input Status indicator standard • 5/16 inch diameter output terminal studs for large diameter wires and lugs • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
DIN Rail Mount
• A pre-attached Thermal Pad can be ordered to eliminate the need for thermal compound using the “H” suffix • UL 508 overload endurance rated Notes: A
B
C
D
J
K Assemblies
Plug-In Mount Assemblies Accessories
34
Heat Sinks & other Accessories
Page 71
Series
HDC
100
A
Operating Voltage 60: 7-48 VDC 100: 7-72 VDC 200: 7-150 VDC
120
04 .0 ] [1 09 4.
Thermal Pad Blank: Not Included H: Included
1.
Control Voltage A: 90-140 VAC D: 4.5-32 VDC
70
[4
3. 1
]
Page 78
H
Rated Load Current 120: 120 Amps 160: 160 Amps
2.8
9[
73
.5]
Other Crydom Motion Control solutions available at: motion.crydom.com
PCB Mount Crydom offers an extensive line of PCB Mount Solid State Relays including the popular industry standard footprint SIP, Mini SIP and DIP configurations and most Crydom SIP type SSRs are also offered as DIN Rail mountable Assemblies. Models are available for applications requiring ratings from 1 to 25 Amps at 24 to 660 VAC or 1 to 20 Amps at 1 to 200 VDC. Inputs are available covering 24 to 140 VAC or 3 to 32 VDC depending upon model. Excepting some AC output models rated greater than 10 Amps where forced air is used for improved output ratings (forced air is not required for DC output), all Crydom PCB Mount Relay output ratings are based upon free air and 40 °C ambient. See the product pages for a summary of available package size and pin out, ratings, features and Safety Agency approvals. Visit the SSR Assemblies section of the catalog or the Crydom website for additional information on Crydom PCB Mount SSRs and Assemblies. AC Output Page Series
36 37 38 39 40 41 42 43
ASO MP CX MCX LS PF DPA SDV
Description
44 DMO 45 CMX 46 MP
1.5
2
3
Rating Amps 4 5 8 12 25 Solid State Relays
Mini SIP SIP SIP SIP SIP SIP DIP DIP
DC Output Page Series
1
Description Mini SIP SIP SIP
Rating Amps 3 5 6 10 20 Solid State Relays
PCB MOUNT • AC Output • Relays ASO Series
1.5-2 Amps
Panel Mount PCB Mount PCB Mount AC
• Compact design Solid State Relay ideally suited for high density PCB applications • Ratings up to 2 Amps @ 12-280 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive
loads) output
• Solderable 0.015” x 0.030” [0.4 mm x 0.8 mm] pins can also plug fit SIP type IC socket Notes: A
B
C
D
J
DIN Rail Mount 0. 93
[2 3
.6 ]
0.
16
[3
.9
]
Plug-In Mount Assemblies
Series
ASO
Rated Load Current 241: 1.5 Amps 242: 2 Amps
241
R 0.20 [5.1 ]
2] ] 5. .8 [1 [17 60 0 0. 0.7
Accessories
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
0.5
0[
12
0.2
4[
0.0
6.0
3[
36
.6]
]
0.8
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays 3-4 Amps Panel Mount
MP Series
B
D
J
DIN Rail Mount
Notes: A
PCB Mount PCB Mount AC
• SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 4 Amps @ 24-280 VAC • Control Voltage of 3-32 VDC • 10 mm plastic housing allows for operation at -40ºC
Sockets Page 81
1. 6
7
[4 2.
4]
0.
40
[1
0.
2]
Page 49
240
D
Assemblies
MP
Rated Load Current 3: 3 Amps 4: 4 Amps (240 suffix only)
3 1.0
0[
25
.4]
40
0.
Control Voltage D: 3-32 VDC
0 .7] 0.2 12 0[ 0.5
2] 0. [1
] .1
[5
Complete specifications of these & other Crydom products available at: www.crydom.com
0.2
5[
Accessories
Series
Operating Voltage 120: 12-140 VAC 240: 24-280 VAC
Plug-In Mount
DIN Rail Model
6.4
]
37
PCB MOUNT • AC Output • Relays CX Series
5 Amps
Panel Mount PCB Mount PCB Mount AC
• SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 5 Amps @ 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • High surge current rating
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • AC or DC Control Voltage options • UL 508 overload endurance rated Notes: A
B
C
D
J
DIN Rail Mount 0. 0. 30 [ 25 7 [6 .6] .4 ]
Series Assemblies
CX
E
240
D
Page 81
0
[4 1.
7]
Page 49
1. 6
Plug-In Mount
Operating Voltage 240: 12-280 VAC 380: 48-530 VAC 480: 48-660 VAC
Sockets
DIN Rail Model
Rated Load Current 5: 5 Amps
5
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
0.9
0[
0.20 [5.1 ]
22
.9]
0
7 0. 9] 8] 7. 7. [2 [1 .10 1
Accessories
Control Input Type Control Voltage Blank: 3-15 VDC D: DC Input (240 & D suffix only) A: AC Input 4-15 VDC (380/480 & D suffix only) 90-140 VAC (A suffix only) E: 15-32 VDC (D suffix only) 18-36 VAC (A suffix only)
R
0.3
5[
0.0
8.9
]
4[
38
1]
Other Crydom Motion Control solutions available at: motion.crydom.com
PCB MOUNT • AC Output • Relays Panel Mount
5 Amps • SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 5 Amps @ 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • High surge current rating
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • AC or DC Control Voltage options • 10 mm plastic housing allows for operation at -40ºC B
C
D
J DIN Rail Mount
Notes: A
PCB Mount PCB Mount AC
MCX Series
Sockets Page 81
MCX
E
240
D
[4 7
Assemblies
1. 6
R 0 .7] 0.2 12 0[ 0.5
2]
] .1 [5
Complete specifications of these & other Crydom products available at: www.crydom.com
0[
25
.4]
0. [1
Rated Load Current 5: 5 Amps
1.0
40 0.
Operating Voltage 240: 12-280 VAC 380: 48-530 VAC 480: 48-660 VAC
5
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
0.2
5[
0.0
4[
1]
6.4
Accessories
Series
Control Voltage Blank: 3-15 VDC (240 & D suffix only) 4-15 VDC (380/480 & D suffix only) 90-140 VAC (A suffix only) Control Input Type E: 15-32 VDC (D suffix only) D: DC Input 18-36 VAC (A suffix only) A: AC Input
2.
4]
0.
40
[1
0.
2]
Page 49
Plug-In Mount
DIN Rail Model
]
39
PCB MOUNT • AC Output • Relays LS Series
8-12 Amps
Panel Mount PCB Mount PCB Mount AC
• SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 12 Amps @ 24-280 VAC with external heat sink • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive
loads) output Notes: A
B
C
D
J
DIN Rail Mount 1.
39
[3
5.
3]
Plug-In Mount
12
Control Input Type D: DC Input
R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
1.2
2[
.3] 7 [4 0.1 0.30
31
.0]
[7.6
]
8] 7. ] [1 2.9 70 [2 0. .90 0
Accessories
Control Voltage Blank: 4-10 VDC E: 20-28 VDC
D
]
240
3. 1
E
[1
LS
52
Series
Rated Load Current 8: 8 Amps 12: 12 Amps
0.
Assemblies
Operating Voltage 240: 24-280 VAC
Pin Terminal 0.032 sq (4 places)
40
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
• SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 10 Amps (convection) or 25 Amps (forced air flow) @ 48-660 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive
loads) output
• AC or DC Control Voltage options B
C
D
J
DIN Rail Mount
Notes: A
Panel Mount
25 Amps
PCB Mount PCB Mount AC
PF Series
Sockets Page 81
E
240
D
] [4 1
.7
85
1. 64
25
R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On 0.40
1.3
3[
[10
.2]
9] 2. ] [2 7.9 90 [2 0. .10 1
Control Input Type Control Voltage D: DC Input Blank: 3-15 VDC (240 & D suffix only) A: AC Input 4-15 VDC (380/480 D suffix only) 90-140 VAC (A suffix only) E: 15-32 VDC (D suffix only) 18-36 VAC (A suffix only)
Assemblies
PF
Rated Load Current 25: 25 Amps
0.3
0.0
0[
4[
Complete specifications of these & other Crydom products available at: www.crydom.com
1]
33
.7]
Accessories
Series
0.
Operating Voltage 240: 12-280 VAC 380: 48-530 VAC 480: 48-660 VAC
[2
1.
5]
Page 49
Plug-In Mount
DIN Rail Model
7.6
]
41
PCB MOUNT • AC Output • Relays DPA Series
1 Amp
Panel Mount PCB Mount PCB Mount AC
• DIP Solid State Relay ideally suited for high density PCB applications • Ratings to 1 Amp @ 280 VAC • Control options include 3.5-10 VDC or 10-35 mAmps DC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
• Solderable Pin layout fits IC grid pattern and pluggable IC DIP type sockets Notes: A
B
D
J
DIN Rail Mount Plug-In Mount
0.2
2[
19
1. 6]
41
]
[2
DPA
5.5
.6 ] [6 26 0.
58 0. ] .4 7] 17 4. [ [1 0.69
Accessories
42
Control Voltage 11: 10-35 mA DC 19: 3.5-10 VDC
0.
85
Assemblies
Series
Operating Voltage 41: 20-140 VAC 61: 20-280 VAC
0.2
2[
5.6
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays SDV Series
• Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • Solderable Pin layout fits IC grid pattern and pluggable IC DIP type sockets B
C
D
J
2[
] .4
7] 17 4. [ [1 0.69
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies .6 ] [6
58
0.
Rated Load Current 15: 1.5 Amps
0. 26
R
]
15
1. 6
24
[2
SDV
Operating Voltage 24: 12-280 VAC
]
0. 85
Series
5.5
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
0.2
2[
5.6
]
Accessories
0.2
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount PCB Mount AC
• DIP Solid State Relay ideally suited for high density PCB applications • Ratings to 1.5 Amps @ 280 VAC • Control Voltage of 3.5-10 VDC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
Panel Mount
1.5 Amps
43
PCB MOUNT • DC Output • Relays DMO Series
3 Amps
Panel Mount PCB Mount PCB Mount DC
• Compact design Solid State Relay ideally suited for high density PCB applications • Ratings up to 3 Amps @ 60 VDC • 3-10 VDC Control Voltage • Low impedance MOSFET output minimizes total power dissipation
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
• Solderable 0.015” x 0.030” [0.4 mm x 0.8 mm] pins can also plug fit SIP type IC socket • Easily paralleled for high current applications B
D
J
0. 93
[2 3
.6 ]
0.
20
[5
Plug-In Mount
.0
]
DIN Rail Mount
Notes: A
Assemblies
Series
DMO
Rated Load Current 063: 3 Amps
063
2] ] 5. .8 [1 [17 60 0 0. 0.7
Accessories
0.20 [5.1 ]
0.5
0[
12
0.2
7[
0.0
6.8
3[
44
.6]
]
0.8
]
Specifications are subject to change without prior notice
PCB MOUNT • DC Output • Relays Panel Mount
3-20 Amps • SIP Solid State Relay ideally suited for high density PCB applications • Low impedance MOSFET output minimizes total power dissipation • Ratings up to 20 Amps @ 60 VDC, 10 Amps @ 100 VDC or 3 Amps @ 200 VDC • Easily paralleled for high current applications
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed) B
C
D
J
DIN Rail Mount
Notes: A
PCB Mount PCB Mount DC
CMX Series
Sockets Page 81
0.
28
[7
.1
]
Page 61
CMX
E
200
5
[4 1. 7] 1. 64
0.9
0.20 [5.1 ]
0[
9] 8] 7. 7. [2 [1 .10 1 0.0
4[
Complete specifications of these & other Crydom products available at: www.crydom.com
22
0
Control Input Type D: DC Input
7 0.
Control Voltage Blank: 3-10 VDC E: 20-28 VDC
D
Assemblies
Series
.9]
Accessories
Operating Voltage 60: 0-60 VDC 100: 0-100 VDC 200: 0-200 VDC
Rated Load Current 3: 3 Amps (200 VDC only) 5: 5 Amps (60 VDC only) 6: 6 Amps (100 VDC only) 10: 10 Amps (60 & 100 VDC only) 20: 20 Amps (60 VDC only)
Plug-In Mount
DIN Rail Model
1.0
]
45
PCB MOUNT • DC Output • Relays MP Series
3 Amps
Panel Mount PCB Mount PCB Mount DC
• SIP Solid State Relay ideally suited for high density PCB applications • Ratings up to 3 Amps @ 60 VDC • 10 mm plastic housing allows for operation at -40ºC • Normally Closed version available (“-B” suffix option)
• Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
Notes: A
B
C
D
J
DIN Rail Mount
DIN Rail Model
Assemblies
Page 81
0. [1 40
1.
67
[4
2. 4
]
0.
Series
MP
Operating Voltage DC: 3-60 VDC
DC
D
Rated Load Current 3: 3 Amps
3
Control Voltage D: 3-32 VDC
-B Output Form Blank: Normally Open -B: Normally Closed
1.0
0[
25
.4]
40 0. 0 .7] 0.2 12 0[ 0.5
2]
0. [1
Accessories
] .1 [5
46
Sockets
2]
Plug-In Mount
Page 61
0.2
5[
6.4
]
Specifications are subject to change without prior notice
DIN Rail Mount Crydom DIN Rail Mounted Solid State Relays and Contactors are available with single, dual and 3 phase outputs. Industry standard 22.5 mm and 45 mm single phase packages are available from 10 to 65 Amps. Slim 6 to 18 mm high power density packages are available from 0.1 to 12 Amps for space restricted panels. Inputs cover the range of 24 to 280 VAC or 3 to 32 VDC and feature LED input status indicator.
AC Output Page Series
DRA-CN DRA 50 SeriesOne DR 51 CKR 52 CMR 53 SeriesOne DR Dual
Description 2 2.4 3
48
6 mm
49
10/54 mm
4 4.2 4.8 5
6 7.6 8
Rating Amps 10 12 20 25 30 35 45 55 65 Solid State Relays
11 mm 22.5 mm 45 mm 18 mm Solid State Relay Timers
54
SeriesOne DR Timer
Timer
55
DRA3P DRA3R CTR DRC3P DRC3R
3 Phase
Solid State Contactors
Crydom DIN Rail mounted SSRs and Contactors are “ready-to-use” and carry Safety Agency approvals as noted on each catalog sheet. Visit the DIN Rail SSR and Contactors section of the catalog or Crydom website for additional information on Crydom DIN Rail Mount SSRs and Contactors.
56 57 58 59
Reversing 3 Phase 3 Phase Reversing
DC Output Page Series
Description 6 mm
63
DRA-CN DRA SeriesOne DR CKM
64
SeriesOne DR Timer
Timer
65
DRA4D
Reversing
60 61 62
Rating Amps 0.1 3 3.5 5 6 8 10 12 20 30 Solid State Relays
10/54 mm 11/18 mm 22.5 mm Solid State Relay Timers Solid State Contactors
DIN RAIL MOUNT • AC Output • Relays DRA-CN Series
2 Amps
Panel Mount PCB Mount
• Thin 6.2 mm DIN Rail mount Solid State Relay • Replaceable CN Series SSR with ratings of 2 Amps @ 240 VAC • LED indicator for easy identification of control status • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive
loads) output Notes: A
B
C
D
J
DIN Rail Mount DIN Rail Mount AC Plug-In Mount
Plug-In Mount ID Marker Strips Page 80 Relays
24
R
5[
80
]
.1 ]
] 2. 6 [9
Accessories
Assembly Input Voltage 05: 3-12 VDC 24: 15-30 VDC 3. 64
240A
3.1
[6
DRA-CN
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
24
Series
Operating Voltage 240A: 24-250 VAC, 2 Amps
0.
Assemblies
48
Page 67
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Relays 3-10 Amps • Ready-to-use DIN Rail mountable Solid State Relays assemblies using standard Crydom SIP SSRs • Slim 10 mm (single channel) & 54 mm (four channels) packages • Ratings from 3 to 10 Amps • Operating Voltage of 12-380 VAC with back-to-back SCR output for added reliability in commercial
PCB Mount
and heavy industrial applications
B
D
H
DIN Rail Mount DIN Rail Mount AC
• Fits standard 35 mm DIN Rail profiles • Cage style screw termination for easy and reliable wire connection • AC & DC Control Voltage versions available depending upon selected SSR • Available with Normally Closed output • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • LED indicator for easy identification of control status Notes: A
Panel Mount
DRA Series
J
Page 35
62
62
[5 12 2.
0.
39
[1
0. 0]
3.
53
[8
9. 6]
3. 7]
.2]
Assemblies
.2]
DRA4 with MP Series SSR (Four channels)
Accessories
5[
]
Standard Crydom SSR p/n including the following series: CX/CXE MCX/MCXE MP (One Channel only) PF (One Channel only)
2.4
9. 6
CXE240D5
[8
1
53
DRA
5[
3.
Series
2.4
Number of Channels 1: One N.O. Channel 4: Four N.O. Channels
Plug-In Mount
PCB Mount Relays
DRA1 with MP Series SSR (One channel) Complete specifications of these & other Crydom products available at: www.crydom.com
49
DIN RAIL MOUNT • AC Output • Relays SeriesOne DR
3-12 Amps
Panel Mount PCB Mount
• DIN Rail mount 11 mm (3 & 6 Amps) or 18 mm (12 Amps) wide Solid State Relay • Operating Voltage of 24-280 VAC and 48-600 VAC • Fits standard 35 mm DIN Rail profiles • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
DIN Rail Mount DIN Rail Mount AC
• Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-140 VAC, 200-265 VAC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • IP20 housing for greater safety • LED indicator for easy identification of control status • UL & cUL listed • UL 508 overload endurance rated Notes: A
B
C
D
J ID Marker Strips
* Drawing shown on the right
.3]
[8 3
.7 ]
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On (D suffix only) 30
Accessories
Control Voltage A: 200-265 VAC B: 90-140 VAC D: 4-32 VDC E: 18-36 VAC
R
86
3.
12
]
A
0[
1. 0
24
3.4
[1
DR
Rated Load Current 03: 3 Amps * 06: 6 Amps * 12: 12 Amps
43
Assemblies
50
Series
Operating Voltage 24: 24-280 VAC 48: 48-600 VAC
0.
Plug-In Mount
Page 80
Other Crydom Motion Control solutions available at: motion.crydom.com
DIN RAIL MOUNT • AC Output • Relays Panel Mount
10-30 Amps
PCB Mount
• Solid State Relay with ratings from 10 to 30 Amps • Operating Voltage of 24-660 VAC • Fits standard 35 mm DIN Rail profiles • Slim 22.5 mm (width) package
C
D
J
Plug-In Mount
B
10
Operating Voltage 24: 24-280 VAC 48: 48-530 VAC 60: 48-660 VAC
E
P
Rated Load Current 10: 10 Amps 20: 20 Amps 30: 30 Amps
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
24
-10 3.9
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
5[
1]
D
Overvoltage Protection Blank: Not Included P: Included
[8 0.
CKR
Control Voltage D: 4-32 VDC B: 90-140 VAC A: 110-280 VAC AxxxxE: 18-36 VAC
3. 16
Series
0.
88
[2
2.
2]
Notes: A
DIN Rail Mount DIN Rail Mount AC
• Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-140 VAC, 110-280 VAC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • LED indicator for easy identification of control status • Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection • Enhanced surge current ratings for the 30 Amps (facilitates the use of circuit breakers instead of fuse protection)
10
0.3
]
Accessories
CKR Series
51
DIN RAIL MOUNT • AC Output • Relays CMR Series
35-65 Amps
Panel Mount PCB Mount
• Solid State Relay with ratings from 35 to 65 Amps • Operating Voltage of 24-660 VAC • Fits standard 35 mm DIN Rail profiles • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
• Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-140 VAC • Available with Zero Voltege Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • LED indicator for easy identification of control status • Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
DIN Rail Mount DIN Rail Mount AC
Notes: A
C
D
J
1. 7
5
[4
4.
5]
Plug-In Mount
24
35
Accessories
Operating Voltage 24: 24-280 VAC 48: 48-530 VAC 60: 48-660 VAC
E
Rated Load Current 35: 35 Amps 45: 45 Amps 55: 55 Amps 65: 65 Amps
P
-10 Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On
4.2
9[
10
9.0
]
5. 2]
A
[7
CMR
Overvoltage Protection Blank: Not Included P: Included
96
Series
Control Voltage D: 4-32 VDC A: 90-140 VAC AxxxxE: 18-36 VAC
2.
Assemblies
52
B
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Dual Relays SeriesOne DR Dual
Panel Mount
6 Amps
PCB Mount
• DIN Rail mount 18 mm wide Solid State Dual Relay • Two independent channels (6 Amps) • Operating Voltage of 24-280 VAC and 48-600 VAC • Fits standard 35 mm DIN Rail profiles
Notes: A
B
C
D
DIN Rail Mount DIN Rail Mount AC
• Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Flexible Control Voltage of 4-32 VDC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • IP20 housing for greater safety • LED indicator for easy identification of control status • UL & cUL listed • UL 508 overload endurance rated J ID Marker Strips
Control Voltage D: 4-32 VDC
R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
[8 32 3.
.3]
Assemblies
06
4. 4]
Number of Channels D: Two N.O. Channels
D
86
Accessories
24
0[
]
D
3.4
8. 3
DR
Rated Load Current 06: 6 Amps per channel [1
Series
0. 72
Operating Voltage 24: 24-280 VAC 48: 48-600 VAC
Plug-In Mount
Page 80
Other Crydom Motion Control solutions available at: motion.crydom.com
53
DIN RAIL MOUNT • AC Output • Relay Timers SeriesOne DR Timer
6 Amps
Panel Mount PCB Mount
• DIN Rail mount 11 mm (6 Amps) Solid State Relay Timer • Operating Voltage of 24-280 VAC • Fits standard 35 mm DIN Rail • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
3.4
5[
87
.7]
]
Control Voltage A: 180-240 VAC/DC B: 90-140 VAC/DC D: 12-24 VAC/DC
R
3. 0
06
[8
Accessories
Timing Function A: A/At, Delay on Make B: Single Shot C: Delay on Break H: H/Ht, Interval L: L/Li, Repeat Cycle U: Multifunction (A/At, H/Ht, D/Di, B, C, Ac & Bw)
B
Rated Load Current 06: 6 Amps
27
24
J
3.
A
D
1. 0]
Assemblies
DRT
C
[1
Operating Voltage 24: 24-280 VAC
Series
B
44
Plug-In Mount
54
Notes: A
0.
DIN Rail Mount DIN Rail Mount AC
• Universal Control Voltage of 12-24, 90-140 & 180-240 VAC/DC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • IP20 housing for greater safety • LED indicator for easy identification of control status • UL listed & cUL recognized • UL 508 overload endurance rated
Other Crydom Motion Control solutions available at: motion.crydom.com
DIN RAIL MOUNT • AC Output • Contactors DRA3P Series
Control Voltage D: 4-6 VDC E: 18-28 VDC A: 200-265 VAC B: 90-140 VAC C: 36-60 VAC
Other Crydom Motion Control solutions available at: motion.crydom.com
Plug-In Mount .9]
Assemblies
R
73
2
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
Accessories
4
1[
.9 ]
Function 3P: 3 Phase
D
2.9
[4 4
48
Controlled Legs Blank: 3 Legs 2: 2 Legs
7
3P
J
1. 7
DRA
Rated Load Current 2: 2.4 Amp/ 1HP @ 480 VAC 4: 4.2 Amp/ 2HP @ 480 VAC
D
6]
Series
C
[8 9.
Operating Voltage 48: 48-510 VAC
B
3. 53
Notes: A
DIN Rail Mount DIN Rail Mount AC
• Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Wide range of Control Voltage of 5 VDC, 24 VDC, 48 VAC, 115 VAC, 230 VAC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • LED indicator for easy identification of control status • Overvoltage Protection included • HP & kW (IEC) rated • UL 508 overload endurance rated
PCB Mount
• 2.4 & 4.2 Amp rated 3 phase Solid State Contactor • Operating Voltage of 48-510 VAC, 3-Phase • Fits standard 35 mm DIN Rail profiles • No heat sink required & cage style screw terminals for easy installation & reliable wire connection
Panel Mount
2.4-4.2 Amps
55
DIN RAIL MOUNT • AC Output • Contactors DRA3R Series
2.4-4.2 Amps
Panel Mount PCB Mount
• 2.4 & 4.2 Amps rated Motor Reversing Solid State Contactor • Operating Voltage 48-510 VAC, 3 phase • Protective Forward/Reverse interlock built-in function • Fits standard 35 mm DIN Rail profiles
Control Voltage D: 4-6 VDC E: 18-28 VDC A: 200-265 VAC B: 90-140 VAC C: 36-60 VAC
.9]
]
4
73
1. 7
Accessories
Function 3R: Motor Reverser
D
1[
[6
48
2.9
43
3R
Rated Load Current 2: 2.4 Amps/1HP @ 480 VAC 4: 4.2 Amps/2HP @ 480 VAC
2.
Assemblies
56
DRA
J
9. 6]
Series
D
[8
Plug-In Mount
Operating Voltage 40: 48-415 VAC 48: 48-510 VAC
B
53
Notes: A
3.
DIN Rail Mount DIN Rail Mount AC
• No heat sink required & cage style screw terminals for easy installation & reliable wire connection • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Wide range of Control Voltage of 5 VDC, 24 VDC, 48 VAC, 115 VAC, 230 VAC • Input status LED, Forward (green), Reverse (yellow) • Overvoltage Protection included • HP & kW (IEC) rated • UL 508 overload endurance rated
Other Crydom Motion Control solutions available at: motion.crydom.com
DIN RAIL MOUNT • AC Output • Contactors
D
J
Plug-In Mount
C
CTR
D
60
4. 8
7
[1 23
Series
Control Voltage B: 90-140 VAC C: 180-280 VAC D: 4-32 VDC
Rated Load Current 25: 25 Amps/phase
25
-10
4[
Switching Type Blank: Zero Voltage Turn-On -10: Instantaneous Turn-On (DC Control only)
97
.5]
3.
54
[9
0. 0]
Operating Voltage 60: 48-600 VAC
3.8
Assemblies
B
.8 ]
Notes: A
DIN Rail Mount DIN Rail Mount AC
• Flexible Control Voltage of 4-32 VDC, 90-140 VAC, 180-280 VAC • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (inductive loads) output • LED indicator for easy identification of control status • Internal TVS eliminates the need for external Overvoltage Protection • UL 508 overload endurance rated
PCB Mount
• 3 Phase Solid State Contactor with ratings 25 Amps per phase @ 600 VAC • Fits standard 35 mm DIN Rail profiles • 90 mm width package • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
Panel Mount
25 Amps
Accessories
CTR Series
Other Crydom Motion Control solutions available at: motion.crydom.com
57
DIN RAIL MOUNT • AC Output • Contactors SOLICON DRC3P Series
7.6 Amps
Panel Mount PCB Mount
• 3 Phase Solid State Contactor with ratings of 4.8 & 7.6 Amps per phase @ 480 VAC • Up to 5 HP / 3.7 kW Motor Controller ratings • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
• Ultra-efficient thermal management design (Patented) • Flexible 18-30 VAC/DC, 36-55 VAC/DC, 90-140 VAC or 208-265 VAC Control Voltage • LED indicator for easy identification of control status • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output
DIN Rail Mount DIN Rail Mount AC
• Internal TVS eliminates the need for external Overvoltage Protection Notes: A
B
C
D
J ID Marker Strips
Assemblies Accessories
58
DRC
3P
48
Function 3P: Contactor
D
4
Control Voltage A: 208-265 VAC B: 90-140 VAC C: 36-55 VAC/DC D: 18-30 VAC/DC
00
R
3] [4 5. 78 1.
6] [9 5. 6
Operating Voltage 48: 480 VAC
Series
3. 7
Plug-In Mount
Page 80
Load Current per Phase / HP Ratings 4: 7.6 Amp FLA (x2 Controlled Legs); Switching Mode 4.8 Amp FLA Blank: Zero Voltage Turn-On (x3 Controlled Legs) R: Instantaneous Turn-On
2
Auxiliary Contacts, Controlled Legs N.O. - N.C. Blank: 3 Controlled Legs 00: Not included 2: 2 Controlled Legs 11: 1 Solid State Auxiliary Contact, Normally Open; 1 Solid State Auxiliary Contact, Normally Closed 20: 2 Solid State Auxiliary Contacts, Normally Open
3.4
1[
86
.7]
Other Crydom Motion Control solutions available at: motion.crydom.com
DIN RAIL MOUNT • AC Output • Contactors 7.6 Amps Panel Mount
SOLICON DRC3R Series
PCB Mount
• Motor Reversing Contactor with rating of 7.6 Amps per phase @ 400-480 VAC • Up to 5 HP / 3.7 kW Motor Controller ratings • Built-in interlock circuit protects the relay/load if both Forward & Reverse inputs are simultaneously actuated • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
• EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments • Ultra-efficient thermal management design (Patented) • Flexible 18-30 VAC/DC, 36-55 VAC/DC, 90-140 VAC or 208-265 VAC Control Voltage • LED indicator for easy identification of control status and direction (2 colors) B
D
J
DIN Rail Mount DIN Rail Mount AC
Notes: A
ID Marker Strips
3R
48
Function 3R: Reversing Contactor
D
4
Control Voltage A: 208-265 VAC B: 90-140 VAC C: 36-55 VAC/DC D: 18-30 VAC/DC
Other Crydom Motion Control solutions available at: motion.crydom.com
00 Auxiliary Contacts, N.O. - N.C. 00: Not included 20: 2 Solid State Auxiliary Contacts, Normally Open (1 contact for each direction)
1. 3.4
1[
86
.7]
Assemblies
DRC
Load Current per Phase 4: 7.6 Amp FLA
Accessories
Series
3. 76
Operating Voltage 40: 400 VAC 48: 480 VAC
[9 5
.6 ]
78
[4
5.
3]
Plug-In Mount
Page 80
59
DIN RAIL MOUNT • DC Output • Relays DRA-CN Series
0.1-3.5 Amps
Panel Mount PCB Mount
• Thin 6.2 mm DIN Rail mount Solid State Relay • Replaceable CN Series SSR with ratings of 3.5 Amps @ 24 VDC or 100 mAmps @ 48 VDC available • LED indicator for easy identification of control status • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid
coils must be diode suppressed) Notes: A
B
D
J
DIN Rail Mount DIN Rail Mount DC Plug-In Mount
Plug-In Mount ID Marker Strips Page 80 Relays
24
80
]
.1 ]
6] 2. [9 4
Accessories
Assembly Input Voltage 05: 3-12 VDC 24: 15-30 VDC 3. 6
024D
5[
[6
DRA-CN
3.1
24
Series
Operating Voltage 024D: 0-24 VDC, 3.5 Amps 048D: 0-48 VDC, 0.1 Amps
0.
Assemblies
60
Page 69
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Relays 3-10 Amps • Ready-to-use DIN Rail mountable Solid State Relay assemblies using standard Crydom SIP SSRs • Slim 10 mm (single channel) & 54 mm (four channels) packages • Ratings from 3 to 10 Amps per channel • Operating Voltage of 1-200 VDC with high efficiency FETs
B
D
H
J
DIN Rail Mount DIN Rail Mount DC
Notes: A
PCB Mount
• Fits standard 35 mm DIN Rail profiles • Cage style screw termination for easy and reliable wire connection • Available with Normally Closed output • LED indicator for easy identification of control status
Panel Mount
DRA Series
Page 35
CMX100D10 3. 7] 2.
12
[5
[8 9. 3. 53 ] 9. 6 [8 3. 53
Standard Crydom SSR p/n including the following series: CMX/CMXE MP (One Channel only)
2.3
0[
58
.5]
Assemblies
[1 0]
.5]
DRA4 with CMX Series SSR (Four channels)
Accessories
4
58
6]
DRA
0[
0. 39
Series
2.3
Number of Channels 1: One N.O. Channel 4: Four N.O. Channels
Plug-In Mount
PCB Mount Relays
DRA1 with CMX Series SSR (One channel) Complete specifications of these & other Crydom products available at: www.crydom.com
61
DIN RAIL MOUNT • DC Output • Relays SeriesOne DR
3-12 Amps
Panel Mount PCB Mount
• DIN Rail mount 11 mm (3 & 6 Amps) or 18 mm (12 Amps) wide Solid State Relay • 3, 6 & 12 Amps Rated Load Current • Operating Voltage of 1-60 VDC and 1-100 VDC • Fits standard 35 mm DIN Rail profiles
• MOSFET output provides added reliability in commercial and heavy industrial applications • Flexible Control Voltage 4-32 VDC • IP20 housing for greater safety • LED indicator for easy identification of control status • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be
DIN Rail Mount DIN Rail Mount DC
diode suppressed)
• UL & cUL listed including General Purpose & Motor Controller ratings • UL 508 overload endurance rated Notes: A
B
D
J
ID Marker Strips
Plug-In Mount
Page 80
06
D
3.4
86
.3]
[1
8. 3
]
0[
12
* Drawing shown on the right
30
[8 3
.7 ]
Control Voltage D: 4-32 VDC 3.
Accessories
DR
Rated Load Current 03: 3 Amps 06: 6 Amps 12: 12 Amps *
0. 72
Assemblies
62
Series
Operating Voltage 06: 1-60 VDC 10: 1-100 VDC
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Relays
• Flexible Control Voltage 4-32 VDC • LED indicator for easy identification of control status • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be
D
J
Plug-In Mount
B
0. 88
[2
2.
2]
Notes: A
DIN Rail Mount DIN Rail Mount DC
diode suppressed)
CKM
Operating Voltage 06: 0-60 VDC
06
Assemblies
Series
PCB Mount
• Solid State Relay with ratings from 10 to 30 Amps @ 60 VDC • Fits standard 35 mm DIN Rail profiles • Slim 22.5 mm (width) package • Low leakage MOSFET output provides added reliability in commercial and heavy industrial applications
Panel Mount
10-30 Amps
10 Rated Load Current 10: 10 Amps 20: 20 Amps 30: 30 Amps
3.9
10
0.3
]
3.
16
[8
0. 1]
5[
Accessories
CKM Series
Complete specifications of these & other Crydom products available at: www.crydom.com
63
DIN RAIL MOUNT • DC Output • Relay Timers SeriesOne DR Timer
6 Amps
Panel Mount PCB Mount
• DIN Rail mount 11 mm (6 Amps) Solid State Relay Timer • Operating Voltage of 1-60 VDC • Fits standard 35 mm DIN Rail • Power FET output provides added reliability in commercial and heavy industrial applications
06
3.4
5[
87
.7]
] 3. 0
Control Voltage D: 12-24 VAC/DC
[8
Accessories
Timing Function A: A/At, Delay on Make B: Single Shot C: Delay on Break H: H/Ht, Interval L: L/Li, Repeat Cycle U: Multifunction (A/At, H/Ht, D/Di, B, C, Ac & Bw)
D
Rated Load Current 06: 6 Amps
27
06
J
3.
A
D
1. 0]
Assemblies
DRT
C
[1
Operating Voltage 06: 60 VDC
Series
B
44
Plug-In Mount
64
Notes: A
0.
DIN Rail Mount DIN Rail Mount DC
• Universal Control Voltage of 12-24 VAC/DC • IP20 housing for greater safety • LED indicator for easy identification of control status • UL listed & cUL recognized • UL 508 overload endurance rated
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Contactors Panel Mount
6-12 Amps
PCB Mount
• DC Motor/Polarity Reversing Solid State Contactor • 6 & 12 Amps ratings • Operating Voltage of 1-100 VDC & 1-250 VDC • Protective Forward/Reverse interlock built-in function
Plug-In Mount 73
.9]
6 1] [5 4.
Control Voltage D: 5-15 VDC E: 15-32 VDC
2.
13
Function 4D: Motor Reverser
D
1[
6]
100
2.9
9.
4D
Rated Load Current 6: 6 Amps / 1/4 HP, 2 FLA @ 180 VDC 12: 12 Amps / 1/4 HP, 4 FLA @ 90 VDC
[8
DRA
J
3
Series
D
3. 5
Operating Voltage 100: 1-100 VDC 250: 1-250 VDC
B
Assemblies
Notes: A
DIN Rail Mount DIN Rail Mount DC
• Fits standard 35 mm DIN Rail profiles • No heat sink required & cage style screw terminals for easy installation & reliable wire connection • Convenient FET switches in H-Bridge configuration • DC Control Voltage options • Input Status LED, Forward (green), Reverse (yellow) • HP & kW (IEC) rated
Other Crydom Motion Control solutions available at: motion.crydom.com
Accessories
DRA4D Series
65
Plug-In Mount Crydom Plug-In Relays are designed to install in industry standard relay sockets. They can also be soldered directly on PCB assemblies if so desired. Available for applications requiring from 2 to 5 Amps at 24 to 280 VAC or 0.1 to 5 Amps at 1 to 100 VDC with inputs covering the range of 24 to 140 VAC or 2 to 32 VDC, these Single Pole Single Throw Normally Open (SPST) relays offer the speed and dependability of Solid State switching in a traditional mechanical relay format. Visit the Accessories and Assemblies sections of the catalog for information on compatible sockets and “ready-to-use” Assemblies. Visit the Plug-In SSR section of the catalog or Crydom web site for additional information on Crydom Plug-In Mount SSRs. AC Output Page Series 67 68
CN ED
Description 280 V / 2 A 280 V / 5 A
DC Output Page Series 69 70
CN ED
Rating Amps 2 3 5 Solid State Relays
Description 1 - 60 V 1 - 100 V
Rating Amps 0.1 3.5 5 Solid State Relays
PLUG-IN MOUNT • AC Output • Relays
loads) output
B
C
D
G
J DIN Rail Model ID Marker Strips 2[
15
]
Page 82
0.
0.5
Sockets
Page 80
Page 48
0.0
0. 2
0
[5 .0 ]
]
.8
[3 ] .0
[5
R
0.0
4[
1.0
]
0.1
Control Voltage 05: 3-12 VDC 24: 15-30 VDC 60: 38-72 VDC 0
[2 7.
9]
4[
1. 1
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
20
0.
24
]
240A
Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
4 6. [1
CN
65 0.
Series
Operating Voltage 240A: 24-280 VAC, 2 Amps
Plug-In Mount Plug-In Mount AC
Notes: A
DIN Rail Mount
• R-C Snubber network for additional dv/dt attenuation • Pluggable into industry standard relay sockets or solderable • DIN Rail mountable using DRSCN series sockets • UL 508 overload endurance rated • UL pilot duty rated
PCB Mount
• Thin (5 mm) Solid State Relay ideally suited for high density PCB applications • Ratings up to 2 Amps @ 24-280 VAC • Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive
Panel Mount
2 Amps
0.5
9[
3.6
15
]
Accessories
CN Series
.0]
67
PLUG-IN MOUNT • AC Output • Relays ED Series
3-5 Amps
Panel Mount PCB Mount
• AC Output Solid State Relay in an industry standard EMR plug-in package • Ratings of 3 & 5 Amps • Operating Voltage of 24-280 VAC • No moving parts eliminates arcing & contact bounce, significantly increasing the life expectancy over
equivalent rated electromechanical relays and contactors
DIN Rail Mount
• Back-to-back SCR output provides added reliability in commercial and heavy industrial applications • Available with Zero Voltage Turn-On (resistive loads) or Instantaneous Turn-On (phase control or inductive loads) output • LED indicator for easy identification of control status • Wide range of AC or DC Control Voltage options • Quick Connect termination for easy installation in sockets or on boards • DIN Rail & PCB mountable sockets available • Silent operation (no acoustical switching noise) • UL & IEC General Use & Motor Controller Ratings available Notes: A
C
D
J
DIN Rail Sockets PCB Sockets Page 82
Page 82
3
Accessories
Control Voltage B: 100-140 VAC C: 18-32 VDC D: 3-15 VDC E: 18-36 VAC F: 48-72 VDC * Drawing shown on the right
R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On
]
C
[2 .5
24
Rated Load Current 3: 3 Amps (not available with B & E suffixes) 5: 5 Amps *
0. 1
Assemblies
ED
Operating Voltage 24: 24-280 VAC
1. 14
[2 9. 1]
0.
5
[1
2.
6]
Plug-In Mount Plug-In Mount AC
Series
68
B
1.4
7[
0.2
37
.4]
[5]
Other Crydom Motion Control solutions available at: motion.crydom.com
PLUG-IN MOUNT • DC Output • Relays 0.1-3.5 Amps Panel Mount
CN Series
PCB Mount
• Thin (5 mm) Solid State Relay ideally suited for high density PCB applications • Ratings of 0.1 Amps @ 48 VDC or 3.5 Amps @ 48 VDC • Pluggable into industry standard relay sockets or solderable • DIN Rail mountable using DRSCN series sockets
• UL 508 overload endurance rated B
D
G
J
DIN Rail Mount
Notes: A
Page 60
15
]
Page 82
0.
0.5
0. 20
[5 .
0]
] .8
[3 0. 65 4]
6.
[1 0
Assemblies
2 0. ]
.0 [5
Series
Operating Voltage 024D: 0-24 VDC, 3.5 Amps 048D: 0-48 VDC, 0.1 Amps
CN
024D
0.0
24
4[
]
0.1
Control Voltage 05: 3-12 VDC 24: 15-30 VDC 60: 38-72 VDC 10
[2 7.
9]
4[
1.
Complete specifications of these & other Crydom products available at: www.crydom.com
1.0
0.5
9[
3.6
15
]
Accessories
2[
Sockets
Page 80
Plug-In Mount Plug-In Mount DC
DIN Rail Model ID Marker Strips 0.0
.0]
69
PLUG-IN MOUNT • DC Output • Relays ED Series
5 Amps
Panel Mount PCB Mount
• DC output Solid State Relay in an Industry standard EMR plug-in package • 5 Amps rated • Operating Voltage of 1-48 VDC and 1-80 VDC • No moving parts eliminates arcing & contact bounce, significantly increasing the life expectancy over
equivalent rated electromechanical relays and contactors
DIN Rail Mount
• LED indicator for easy identification of control status • Wide range of AC or DC Control Voltage options • Quick Connect termination for easy installation in sockets or on boards • DIN Rail & PCB mountable sockets available • Silent operation (no acoustical switching noise) • Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must be diode suppressed)
• UL & IEC General Use & Motor Controller Ratings available Notes: A
D
J
DIN Rail Sockets PCB Sockets Page 82
Page 82
5
Accessories
Control Voltage B: 90-140 VAC * C: 18-32 VDC D: 5-15 VDC E: 18-36 VAC * F: 48-72 VDC * Drawing shown on the right
]
C
[2 .5
06
Rated Load Current 5: 5 Amps
0. 1
Assemblies
ED
Operating Voltage 06: 1-48 VDC 10: 1-80 VDC
1. 14
[2 9. 1]
0.
5
[1
2.
6]
Plug-In Mount Plug-In Mount DC
Series
70
B
1.4
7[
0.2
37
.4]
[5]
Other Crydom Motion Control solutions available at: motion.crydom.com
Assemblies Crydom offers a variety of “ready-to-use” assemblies featuring proven Crydom Solid State Relays and Contactors installed in DIN Rail Sockets or on Panel or DIN Rail mounted Heat Sinks. Assemblies are available for applications ranging from 1 to more than 80 Amps in both AC or DC output versions. Any standard Crydom Panel Mount or SIP type PCB Mount SSR or Contactor can be offered as a “ready-to-use” Assembly. Contact the nearest Crydom Distributor, Representative or local Crydom Sales Office if you don’t locate your exact needed Assembly in the catalog or in the Crydom website.
ASSEMBLIES Heat Sink / SSR Assemblies Panel Mount
PCB Mount
ordering and installation
• Thermal efficiency ratings from 5.0ºC/W to 0.25ºC/W @ 40ºC ambient
• Full SSR assembly ratings up to 82.5 Amps (single phase) or 27.5 Amps per phase (three phase) in a 40ºC ambient • DIN Rail and Panel mountable versions available for both stand-alone heat sinks and SSR assemblies (most models)
• Customized solutions available using single, dual and 3 phase SSRs • Wide variety of accessories available
DIN Rail Mount Plug-In Mount Assemblies Assemblies Accessories
72
• Standard single, dual and 3 phase SSRs mounted on high efficiency HS Series heat sinks • Ready-to-use assemblies with optimum SSR / thermal pad / heat sink combination simplifying selection,
Notes: A
B
C
D
E
F
Panel Mount Relays Page 8
Total Number of Accepted Standard SSRs 1: 1 SSR (50, 30, 25, 20, 15 & 10 suffix only) 2: 1 or 2 SSRs (20, 17, 12 & 07 suffix only) 3: 1-3 SSRs or one 3phase (10, 07, 05, 03 & 02 suffix only)
Series
HS
17
2
DR
Thermal Resistance 50: 5.0 °C/W (DR suffix only) 30: 3.0 °C/W 25: 2.5 °C/W 20: 2.0 °C/W 17: 1.7 °C/W 15: 1.5 °C/W 12: 1.2 ºC/W 10: 1.0 °C/W 07: 0.7 °C/W 05: 0.5 °C/W 03: 0.36 °C/W 02: 0.25 °C/W
DIN Rail Bracket Blank: Not included DR: Included (50, 30, 20, 15, 12 & 10 suffix only)
2
Hardware Kit 1 (HK1)
Standard Crydom SSR p/n
D2450
Thermal Pad (i.e. HSP-1)
Heat Sinks & other Accessories Page 75
SSR
Number of Mounted SSRs Blank: 1 2: 2 3: 3 Heat Sink (i.e. HS201)
Ground Screw (10-32 x 3/8 in)
DIN Rail Kit 1 (DRK1)
Specifications are subject to change without prior notice
Accessories Crydom supports its extensive SSR and Contactor product lines with a comprehensive offer of accessories including Heat Sinks, Thermal Pads, Protective Covers, Sockets, Terminal Lugs, Hardware Kits, Marker Strips and DIN Rail Kits to make it easy to employ Crydom SSRs and Contactors in any application. Crydom can also create special configuration SSRs or Contactors that include installed accessories if so desired. Visit the catalog or Crydom website for additional information on Crydom SSR accessories.
Heat Sink/Accessories Compatibility Page
Part number
75
HS501DR
76
HS301
76
HS251
76
HS202
77
HS201
77
HS172
77
HS151
78
HS122
78
HS103
78
HS101
79
HS073
79
HS072
79
HS053
80
HS033
80
HS023
HK1
HK2
HKM1
HSP-1 HSP-3 HSP-2 HSP-5 KS100
KS101
KS300
DRK1
ACCESSORIES Covers
Covers
Hockey Puck
DIN Rail Bracket
Large Puck
Panel Mount PCB Mount
B
J
B
J
Notes: A
B
J
5]
Notes: A
Notes: A
DIN Rail Kit 1 Part no.: DRK1 Spring, retaining clip, 45 mm DIN Rail bracket and 2 screws 6-32 x 1/4 in.
1.
77
Plug-In Mount
Part no.: KS101 Clear plastic cover for Generation 4 standard hockey puck package SSRs (2.25 x 1.75 in). Safety covers provide added protection from electric shock when installing or checking equipment.
Part no.: KS300 Clear plastic cover large puck panel mount SSRs (4 x 2.9 in). Safety covers provide added protection from electric shock when installing or checking equipment.
[4
DIN Rail Mount
Part no.: KS100, KS100-SMR Clear plastic cover for Generation 3 standard hockey puck package SSRs (2.25 x 1.75 in). Clear plastic cover with cut out window for SMR-6 and MC Series.
71
[6
[9 7
]
.8 ] 11 [1
[5]
2 3. 8
8. 8]
4.
4
2. 88
[7 3. 2]
Assemblies
0.2
1 [2
]
.1 ]
0.9
2.
36
2 [2
.1 ]
29
.2]
[3 7
5[
6
1.1
1. 4
1.
KS100-SMR
[6 0
Accessories Accessories
75
[4
4. 3]
2.
5.4
3.4
]
KS101
74
Specifications are subject to change without prior notice
ACCESSORIES Heat Sinks
HS501DR Panel Mount
Hardware Kits
] .5 [4 4
2x
] .1
[1 6.
32
6]
[8
9] 2. [1 51 0.
1. 6
[5]
0. 46
[1
0.2
0[
.0
]
0.4
[8 31
HKM1
Complete specifications of these & other Crydom products available at: www.crydom.com
[8
DIN Rail Mount
5 0. 6
0.
]
1x 0.1 [4. 5 0]
0.
14 AWG wire leads approx. 12" long (4 Places)
.1]
]
5.3
0 [1
0.6
15
3. 9] [6 52 2.
0.3 [8. 3 4]
0]
0. 8
2
0.
.9 ]
HK1
2x
42
L
J
0.1 [4. 6 1]
[2 7 1 1.
6[
J
1. 75
B
2. 3]
2x
1.6
B
3.
J
Notes: A [1
B
Notes: A
Part no.: HKM1 Bag with 2 SSR mounting screws M4 x 9mm.
49
Notes: A
zinc plating surface finish
.7 ]
Part no.: 3F20-4 (shown below) EMI noise suppression filters with neutral for SSR in three phase systems
Part no.: HK2 Bag with 1 ground screw 10-32 x 3/8 in and 2 bracket screws 6-32 x 1/4 in.
[2 0
Part no.: 3F20 (shown above) EMI noise suppression filters for SSR in three phase systems
• 5.0°C/W Thermal resistance • Suitable for 1 single or dual SSR • DIN Rail mountable • Heat sink material is steel with clear
Part no.: HK1 Bag with 2 SSR mounting screws 8-32 x 3/8 in.
Plug-In Mount
HK2
HKM1 Part no.: 1F25 EMI noise suppression filter for SSR in AC single phase systems
PCB Mount
HK1
Assemblies
AC Filters
HK2
10
.1]
HS501DR includes DIN Rail Mounting Bracket M4 Mounting Screws Latch Release
Accessories Accessories
Filters
75
ACCESSORIES Heat Sinks
Heat Sinks
HS301
Heat Sinks
HS251
HS202
Panel Mount PCB Mount
version available as HS301DR
• Heat sink material is aluminum with black anodized finish
L
B
J
• 2.0°C/W Thermal resistance • Suitable for 1 or 2 single or dual SSR • Panel mountable or DIN Rail mountable version available as HS202DR
• Heat sink material is aluminum with black anodized finish
L
Notes: A
B
J
L
[4
3.3
6 [8
5.3
]
3. 55
3] 3. 2
2. 31
0
[5 8
[8 1.
.7
]
3] 0. [5 98 1.
Assemblies
]
0.1
]
8.4
1 [3
8 [4
[9 0. 2]
8 1. 7
0]
5.
2]
J
natural finish
1.5
1.5
Accessories Accessories
76
B
[8 1.
Plug-In Mount
Notes: A
• 2.5°C/W Thermal resistance • Suitable for 1 single or dual SSR • Panel mountable • Heat sink material is aluminum with
Notes: A
3. 20
DIN Rail Mount
• 3.0°C/W Thermal resistance • Suitable for 1 single or dual SSR • Panel mountable or DIN Rail mountable
]
0.1
8 [4
1.5
HS301DR includes
HS202DR includes
Ground Screw (10-32 x 3/8 in) DIN Rail Kit 1 (DRK1) Heat Sink (HS301) One Hardware Kit 1 (HK1)
Ground Screw (10-32 x 3/8 in) DIN Rail Kit 1 (DRK1) Heat Sink (HS202) One Hardware Kit 1 (HK1) Specifications are subject to change without prior notice
ACCESSORIES Heat Sinks
Heat Sinks
Heat Sinks
HS172
HS151
version available as HS201DR
• Heat sink material is aluminum with black anodized finish B
J
Notes: A
L
B
J
version available as HS151DR
• Heat sink material is aluminum with black anodized finish
L
Notes: A
B
J
L 2] 5.
[4
20
2.
31
3.
[5
] .3 00 ]
0.0
5 [8
3.1
1.5
3.3
1 [3
6 [8
5.3
]
8.4
]
]
5.0
4 [9
3.7
Assemblies
3.
95
[1
1.
3] 1. [8
] 8. 7
3.
78
[4
78 1.
20
[8
1.
0]
5.
2]
Notes: A
natural finish
• 1.5°C/W Thermal resistance • Suitable for 1 single or dual SSR • Panel mountable or DIN Rail mountable
HS201DR includes
HS151DR includes
Ground Screw (10-32 x 3/8 in) DIN Rail Kit 1 (DRK1) Heat Sink (HS201) One Hardware Kit 1 (HK1)
Ground Screw (10-32 x 3/8 in) DIN Rail Kit 1 (DRK1) Heat Sink (HS151) One Hardware Kit 1 (HK1)
Complete specifications of these & other Crydom products available at: www.crydom.com
Plug-In Mount
• 1.7°C/W Thermal resistance • Suitable for 1 or 2 single or dual SSRs • Panel mountable • Heat sink material is aluminum with
Accessories Accessories
• 2.0°C/W Thermal resistance • Suitable for 1 single or dual SSR • Panel mountable or DIN Rail mountable
DIN Rail Mount
PCB Mount
Panel Mount
HS201
77
ACCESSORIES Heat Sinks
Heat Sinks
HS122
Heat Sinks
HS103
HS101
Panel Mount PCB Mount
version available as HS122DR • Heat sink material is aluminum with black anodized finish L 0]
J
one 3 phase SSR mountable or DIN Rail mountable version available as HS103DR • Heat sink material is aluminum with black anodized finish
• Panel
Notes: A
B
J
L
• 1.0°C/W Thermal resistance • Suitable for 1 single or dual SSRs;
one 3 phase SSR
• Panel mountable
• Heat sink material is aluminum with black anodized finish Notes: A
B
J
L
54
[9
0.
• 1.0°C/W Thermal resistance • Suitable for 1, 2 or 3 single or dual SSRs;
] 2. 0
0]
[1 3
[8 15 3.
4.
33
[1 10 .0
]
0.
5. 20
3. 0
0
[7 6.
2]
3.
[8
1.
3]
B
20
Plug-In Mount
Notes: A
3.
DIN Rail Mount
• 1.2°C/W Thermal resistance • Suitable for 1 or 2 single or dual SSRs • Panel mountable or DIN Rail mountable
Ground Screw (10-32 x 3/8 in) DIN Rail Kit 1 (DRK1) Heat Sink (HS122) Two Hardware Kits 1 (HK1)
0] 00 . [1
HS103DR includes
]
0.0
5 [8
3.1
94
Accessories Accessories
HS122DR includes
]
0.2
7 [6
2.3
3.
Assemblies
78
]
0.0
5 [8
3.1
Heat Sink (HS103) Extruded DIN Rail Bracket Fasteners Three Hardware Kits 1 (HK1) Specifications are subject to change without prior notice
ACCESSORIES Heat Sinks
Heat Sinks
Heat Sinks
HS072
HS053
one 3 phase SSR
• Panel mountable
• Heat sink material is aluminum with black anodized finish B
J
Notes: A
L
B
J
one 3 phase SSR
• Panel mountable
• Heat sink material is aluminum with black anodized finish
L
Notes: A
B
J
L
5.
.2
]
24 [1 90
50
[1 39
.7 ]
Assemblies
95 1.
3.5
]
8.9
0 [8
73 [1 82 6.
Complete specifications of these & other Crydom products available at: www.crydom.com
4.
.4 52 [1 00
[4
9. 5]
6.
2. [1 5 6.
00 5. ]
3.8
2 [5
2.1
2.6
]
6.8
3 [6
02
[1
27
.0
]
9]
]
.5
]
Notes: A
natural finish
• 0.5°C/W Thermal resistance • Suitable for 1, 2 or 3 single or dual SSRs;
Plug-In Mount
• 0.7°C/W Thermal resistance • Suitable for 1 or 2 single or dual SSRs • Panel mountable • Heat sink material is aluminum with
4.7
6.0
0 [1
5 [1
20.
7]
52.
4]
Accessories Accessories
• 0.7°C/W Thermal resistance • Suitable for 1, 2 or 3 single or dual SSRs;
DIN Rail Mount
PCB Mount
Panel Mount
HS073
79
ACCESSORIES Heat Sinks
Heat Sinks
HS033
ID Marker Strips
HS023
Panel Mount
CNLB CNLN
PCB Mount
CNL2
anodized finish Notes: A
B
J
L [2 60 .9
54 [2 10
Part no.: CNL2 A package of 10 plastic strips comprising 10 markers printed individually from 11 to 20. B
J
5]
Notes: A [1 0.
0]
0. 41 ] .0 83
[2
11
Accessories Accessories
.1 4
[2
54 8.
10 .2 7
.0 ]
]
[1 99 . 5 7. 8
3] 8. 7
]
1.4
0 [9
3.6 16 .9 ]
Assemblies
]
9.8
5 [6
2.7
Part no.: CNLN A package of 10 plastic strips comprising 10 markers printed individually from 1 to 10.
[7
L
• Heat sink material is aluminum with black
Part no.: CNLB A package of 10 plastic strips comprising 10 individual unprinted markers.
76
J
one 3 phase SSR
• Panel mountable
4]
B
5
Plug-In Mount
Notes: A
• 0.25°C/W Thermal resistance • Suitable for 1, 2 or 3 single or dual SSRs;
2.
one 3 phase SSR • Panel mountable • Heat sink material is aluminum with black anodized finish
[2 22 .
DIN Rail Mount
• 0.36°C/W Thermal resistance • Suitable for 1, 2 or 3 single or dual SSRs;
0.1
7[
80
4.3
]
Specifications are subject to change without prior notice
ACCESSORIES Power Supply
Sockets
20 VAC
DRS Socket Panel Mount
Lug Terminals TRM6
Part no.: TRM1 Copper wire lug for AWG 6 (13.3 mm2) to AWG 0 (53.5 mm2) wire size. Mounts with #8, #10, M4 or M5 screws. (Not compatible with IP20 covers)
Part no.: PS120, PS240 The PS120 and PS240 power supplies are specifically designed to supply the 20 VAC supply voltage used by the Crydom LPCV series linear proportional controls, from a 120 or 240 VAC 50/60 Hz nominal AC voltage main supply. Notes: A
B
Part no.: DRS4 54 mm four channel DIN Rail mountable socket to mount up to 4 Crydom PCB mount relays onto standard 35 mm DIN Rail profiles.
J
Part no.: TRM6 Copper wire lug for AWG 14 (2.1 mm2) to AWG 6 (13.3 mm2) wire size. Mounts with #8, #10, M4 or M5 screws.
.7 ]
[3
TRM6
[5 3
DRS1
3. 53
45
6. 2
]
0.
] .0 [1 9
6]
2.0
6[
2.0
6[
52
.3]
52
.3]
0.
75
2.
19
[5
3.
5.
53
6]
[8
9.
3.
0.
00
63
[7
[1
1.
5.
9]
94
[4
9.
[1
1.
2]
5]
1
[8 9.
[2
6]
5.
4]
2
2. 1
2
]
2.1
[5 .05
0]
]
3.5
3 [1
0.5
[1
.0]
[23
39
]
7.4
8 [2
1.0
1 0.9
DRS4
0.
TRM1 TRM3/0
J
7. 8]
J
B
9
B
Notes: A
1. 4
Notes: A
DRS Series DIN Rail Mountable Sockets Part no.: DRS1 10 mm single channel DIN Rail mountable socket to mount 1 Crydom PCB mount relay onto standard 35 mm DIN Rail profiles.
Assemblies
Part no.: TRM3/0 Copper wire lug for AWG 4 (21.2 mm2) to AWG 3/0 (85 mm2) wire size. Mounts with 3/8” bolt/stud.
DIN Rail Mount
DRS4
Accessories Accessories
TRM3/0
PCB Mount
DRS1
Plug-In Mount
TRM1
Complete specifications of these & other Crydom products available at: www.crydom.com
81
ACCESSORIES Sockets
DRS-CN Sockets
Sockets
DRSED Socket
Sockets
PCBSED Socket
Panel Mount PCB Mount
Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Solid State Contactors, and specializes in custom designed solid state switching solutions for any load control application. Crydom is a brand of Sensata.
DIN Rail Mount
Notes: A
B
G
J
ED socket to mount ED Series relays onto series relays. Rated at 250 V AC/DC, 12 standard 35 mm DIN Rail profiles. Rated at 250 V Amps. Suggested Pin-out hole diameter: 1.0 mm AC/DC, 12 Amps. The DRSED includes M3 Combo www.sensata.com Notes: A B J screws. Notes: A
B
J
3.1 [6 .1 ]
5 [8
0. 24
0]
0]
6 [6
.5]
[40
8
[3 2.
5]
1.6
0.
55
[1
4]
1. 2
1] [7
6] 2. [9 64 3.
Accessories Accessories
2.3
2. 8
Assemblies
0.
61
[1
5. 5
]
Plug-In Mount
CN Series DIN Rail Mountable Sockets www.crydom.com Part no.: DRSCN05, DRSCN24 DIN Rail mountable socket to mount CN Series relays onto standard 35 mm DIN Rail profiles. Maximum output rating for DRSCN sockets is 250 V, 6 Amps regardless of selected SSR. DRS-CN sockets are 6 mm wide and include input status LED.
Sensata Technologies is one of the world’s leading suppliers of sensing, electrical protection, control and power management solutions with operations and business centers in 13 countries. Sensata’s products improve safety, efficiency and comfort for millions of people every day in automotive, appliance, aircraft, industrial, military, heavy vehicle, heating, air-conditioning and ventilation, data, telecommunications, ED Series DIN Rail Mountable Socket ED Series PCB Mountable Socket recreational vehicle and marinePartapplications. For more Part no.: DRSED no.: PCBSED Finger safe IP10 DIN Rail mountable PC Board information please visit Sensata’s website at: mountable socket for
82
Specifications are subject to change without prior notice
ACCESSORIES Thermal Pads Hockey Puck
Thermal Pads Large Puck
Part no.: HSP-6 Thermal pad for mini-puck panel mount SSRs. Includes adhesive on one side.
Part no.: HSP-1 25 pack of non-adhesive thermal pads for standard hockey puck package SSRs (2.25 x 1.75 in).
Part no.: HSP-3 Thermal pad for large puck panel mount SSRs (4 x 2.9 in).
Notes: A
Part no.: HSP-2 (shown above) Thermal pad for standard hockey puck package SSRs (2.25 x 1.75 in). Includes adhesive on one side.
Notes: A
B
2.9 5 [4
.7]
0.0 0 [0. 3 1 Th ] k.
] 0.0 0 [0. 3 1 Th ] k.
4. 1
1
2.
1. 33
[3 3.
8]
]
[73
4.5
2]
6.9
[5 7.
7 [1
1.7
25
0.6
J
Complete specifications of these & other Crydom products available at: www.crydom.com
Plug-In Mount
J
Assemblies
B
0.0 0 [0. 3 1 Th ] k.
Accessories Accessories
Notes: A
Part no.: HSP-5 (shown above) Thermal pad for large puck panel mount SSRs (4 x 2.9 in). Includes adhesive on one side.
4. 4]
J
[1 0
B
DIN Rail Mount
PCB Mount
Panel Mount
Thermal Pads Mini-Puck
83
AMERICAS
SENSATA TECHNOLOGIES INC. 529 Pleasant Street, Attleboro, MA 02703 USA +1 (877) 502 5500 – Option 2 – Option 3
[email protected]
EUROPE, MIDDLE EAST & AFRICA
SENSATA TECHNOLOGIES HOLLAND B.V. Jan Tinbergenstraat 80 7559 SP Hengelo The Netherlands +44 (1202) 416170
[email protected]
© 2017 Crydom Inc., All Rights Reserved. Specifications are subject to change without prior notice. Crydom and the Crydom logo are registered trademarks of Crydom Inc.
CAT/CR/SF/EN
Distributed by :
06/2014 Rev. 040317
ASIA
SENSATA TECHNOLOGIES CHINA CO., LTD. 30th Floor, InterContinental Center, 100 Yu Tong Rd, Jing An District, 200070 Shanghai, China
China +86 (21) 2306 1500
[email protected]
Japan
+81 (45) 277 7117
[email protected]
Korea
+82 (31) 601 2004
[email protected]
India
+91 (80) 67920890
[email protected]
Rest of Asia
+886 (2) 27602006 ext 2808
[email protected]