19 Jan 2011 ... Projection of straight lines. 6. Projection of planes & simple solids ie cube. 7.
Projection of solids – I (axis parallel to one plane & perpendicular ...
SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY SCHOOL OF ARCHITECTURE AND INTERIOR DESIGN Date of preparation: 19.01.2011 Course Code Course Title Year & Semester Course time Location
: AR 0132 : ENGINEERING DRAWING : 1st Yr, II sem : Jan 2011-Apr 2011 : Architecture Department
Faculty Details: Name of the Staff
Sec. Office
CT.LAKSHMANAN
A
Arch Dept
Office Hours 8.30 A.M4.00P.M
E-mail ID
[email protected]
Required Text Books: 1. Ramachandran.S, “Engineering Drawing”, private Publication, Chennai, 2002. 2. Natarajan. K.V. “Engineering Drawing”, Private Publication, Chennai, 2004. 3. Narayanan K.L. & Kannaiah P. “Engineering Graphics”, SciTech Publications, Chennai, 1999. 4. Bhatt.N.D. “Elementary Engineering Drawing”, (First Angle Projection ), Charotar Publishing Co., Anand,1999.
5. Venugopal .K. “Engineering Drawing & Graphics”, New age international Pvt. Ltd., 1999. Prerequisite: NIL Objectives: To familiarize the students with • The construction of geometrical figures • The projection of 2Dimensional & 3Dimensional elements. • Preparation and interpretation of building drawing Tentative test dates Model Examination
: 04.05.2011
Model exam Portions Model Examination
: ALL 5 Units
Assessment details
: portfolio : Model Exam-
60 Marks 15 Marks
Outcomes Students who have been successfully completed this course Course outcome Program outcome • To draw and interpret various projections of • To expose the students to 2Dimensional & 3Dimensional objects fundamentals of 1
• To prepare and interpret the drawings of buildings. Detailed Session plan
engineering drawing
Lecture No. Topics to be covered UNIT 1 FUNDAMENTALS OF ENGINEERING DRAWING 1. Lettering 2. geometrical construction 3. conics UNIT 2 PROJECTION OF POINTS, LINES, PLANES AND SOLIDS 4. principles of projections – orthographic projection, projection of points 5. Projection of straight lines 6. Projection of planes & simple solids ie cube 7.
Projection of solids – I (axis parallel to one plane & perpendicular to the other plane) 8. Projection of solids – II (axis parallel to one plane & inclined to the other plane) – prism and pyramid resting on base edges and base corners 9. Projection of solids – III (axis parallel to one plane & inclined to the other plane) – Prism and pyramid Resting on longer edges and slant edges 10. Projection of solids – IV (axis parallel to one plane & inclined to the other plane) – cylinder and cone 11. Projection of solids – VI (axis parallel to both the planes) UNIT 3 PICTORIAL PROJECTIONS – I 12. Conversion of Isometric view of regular solids to Orthographic projection UNIT 4 PICTORIAL PROJECTIONS – II 13. Conversion of orthographic projection of regular solids 14. Conversion of orthographic projection of combination of solids to isometric view UNIT 5 BUILDING DRAWING 15. Building Drawing – plan, elevation and section of single storied residential (or) office building with flat RCC roof and brick masonry walls having not more than 3 rooms. 16. MODEL EXAM
Staff In-charge
Dean/Arch
2
AR0132
ENGINEERING DRAWING Prerequisite Nil
L 1
T 0
P 4
C 3
PURPOSE 1. To draw and interpret various projections of 2: Dimensional & 3: Dimensional objects 2. To prepare and interpret the drawings of buildings. INSTRUCTIONAL OBJECTIVES To familiarize with • The construction of geometrical figures • The projection of 2: Dimensional & 3: Dimensional elements. • Preparation and interpretation of building drawing UNIT 1 FUNDAMENTALS OF ENGINEERING DRAWING 3 Lettering, 2: Dimensional geometrical construction, conics and representation of 3: Dimensional objects – principles of projections – orthographic projection. UNIT 2 PROJECTION OF POINTS, LINES, PLANES AND SOLIDS Projection of points, straight lines, planes & solids.
6
UNIT 3 PICTORIAL PROJECTIONS – I Conversion of Isometric view of regular solids to Orthographic projection.
2
UNIT 4 PICTORIAL PROJECTIONS – II Conversion of orthographic projection of regular solids and combination of solids to isometric view.
2
UNIT 5 BUILDING DRAWING 2 Building Drawing – plan, elevation and section of single storied residential (or) office building with flat RCC roof and brick masonry walls having not more than 3 rooms (planning/ designing is not expected in this course). PRACTICALS 60 TOTAL 75 TEXT BOOKS 1. Ramachandran.S, “Engineering Drawing”, private Publication, Chennai, 2002. 2. Natarajan. K.V. “Engineering Drawing”, Private Publication, Chennai, 2004. 3. Narayanan K.L. & Kannaiah P. “Engineering Graphics”, SciTech Publications, Chennai, 1999. REFERENCE BOOKS 1. Bhatt.N.D. “Elementary Engineering Drawing”, (First Angle Projection ), Charotar Publishing Co., Anand,1999. 2. Venugopal .K. “Engineering Drawing & Graphics”, New age international Pvt. Ltd., 1999.
3