Switches

70 downloads 7764 Views 2MB Size Report
Kawasaki, Japan. TVS Cherry Private ... DB Series. 12–15. DA Series. 16–17. E61–E64 Series. 18–20. Subminiature — Sealed. DC Series ... K Series. 44–45. General Purpose. GP Series. 46–49. E13–E20 Series. 50–52 ...... 1/4 HP, 125VAC.
®

M A S T E R C ATA L O G

Switches Selection, Quality and Support For more than 50 years, Cherry Electrical

Cherry also manufactures a full range of

Products has been dedicated to providing

magnetic speed and proximity sensors for

our customers with innovative and reliable

OEM applications, as well as a complete

solutions to all their switching requirements.

line of general purpose and advanced

This catalog includes thousands of variations

performance keyboards.

from which to select — from the snap-action models for which we are best known to a full line of new rocker switches.

For additional information on any of our products or services, call or visit our Web site today.

In addition to our broad product offering, our highly trained engineers are always available

www.cherrycorp.com

In North America

to help you find the right solution for your application — whether it is a standard model or a custom snap-action switch.

Cherry Electrical Products 11200 88th Avenue Pleasant Prairie, WI 53158 Phone: (1) 800 927 6298 Fax: (1) 262 942 6566 In Europe Cherry GmbH Cherrystrasse D-91275 Auerbach/Opf. Germany Phone: (49) (0) 9643 18 0 Fax: (49) (0) 9643 18 1295 In Asia Cherasia Ltd. 13/F, Block A North Point Industrial Bldg. 499 King’s Road North Point Hong Kong China Phone: (852) (0) 2565 6678 Fax: (852) (0) 2565 6827

Cherry Corporation disclaims any warranties of merchantability, fitness for a particular purpose or noninfringement. While Cherry Corporation intends for this information to be accurate, there may be inadvertent technical and typographical errors, for which Cherry Corporation assumes no liability.

© 2004 Cherry Corporation • Printed in U.S.A.

®

QUALITY IN A

Switch Terminology

Switch Characteristics

Global Marketplace

Rest Position

Dimensional Tolerances

The position the switch button (or actuator) assumes when no force is exerted against it. Measured from the reference line to the top of the button or actuator. Frequently specified as a maximum.

All assembly dimensions shown carry the following tolerances unless otherwise specified: Decimals: ±0.002 (2 place), ±0.005 (3 place). Angles: ±5°.

Cherry has been the leader in switch innovation since its

Cherry Locations Worldwide

inception in 1953. To better serve our customers in today’s

The Cherry Corporation Waukegan, Illinois, USA

global marketplace, we now maintain offices and manufacturing facilities in eleven locations worldwide — each with its own

Cherry Electrical Products Division Pleasant Prairie, Wisconsin, USA

engineering and sales staff. Cherry’s principal production capabilities include: ■







Complex, multi-station die design and build capabilities, utilizing the latest in-die sensing and slug detection techniques In-die welding and contact inserting capabilities, which eliminate costly secondary operations. Precision metal stamping, using presses ranging from 40 to 100 tons and press speeds from 200 to 1000 strokes per minute Plastic Molding — Thermoset/ Thermoplastic, Double Shot, Insert, Decorative Class “A”



Low cost laser marking on piece parts and finished assemblies



Robotic switch assembly and testing to ensure the highest quality standards

Cherry Mikroschalter GmbH Auerbach, Germany

We are committed to meeting or exceeding the highest standards for quality assurance — not only in our products, but also in our processes. Our primary objective is to achieve zero defects in every aspect of our activites. As part of our pre-emptive strategy, the prevention of defects always takes precedent over their detection. The quality assurance processes at Cherry’s manufacturing facilities in the United States, Europe and Asia have been certified under ISO 9001and ISO 14001 Environmental.

Reference Line

Miniature

Pre-Travel Pre-Travel

The distance of button (or actuator) travel from rest position to the point of operation. Pre-travel is frequently specified as a maximum.

Rest Position

Horizontal Datum

Cherry SRO Klasterec, Czech Republic Cherry de Mexico, S.A. de C.V. Juarez, Mexico

Cherry Australia Pty. Ltd. Melbourne, Australia Hirose Cherry Precision Company Ltd. Kawasaki, Japan

Low Ratio (Std)

Over-Travel

Operating Position

Operating Point The position of the switch button (or actuator) at which initial switch contact transfer takes place. Measured from the reference line to the top of the button or actuator.

Subminiature Pre-Travel

Move Differential Actuating Line

Reference Line Rest Position

Over-Travel

Operating Position

Cherry SARL Paris, France

Vertical Datum

Actuating Line High Ratio

Cherasia Limited Hong Kong Cherry Electrical Products Ltd. Harpenden, England

Move Differential

Horizontal Datum

Over-Travel Vertical Datum

The continued distance the switch button (or actuator) can travel after contact transfer, without damage to the switch mechanism. Over-travel is frequently specified as a minimum.

TVS Cherry Private Limited Madurai, India

Circuitry Movement Differential

Single-Pole Double-Throw Double-Break

The button (or actuator) movement required between operating point and the reset point. This is frequently dimensioned as a maximum.

Single-Pole Single-Throw Single-Pole Single-Throw Double-Break

Reset Point The point of actuation at which the second or return contact transfer takes place. At this point the contacts snap back to their original position. Measured from the reference line to the top of the button or actuator.

Reference Line

Single-Pole Double-Throw Double-Pole Single-Throw

Reset Travel The distance the switch button (or actuator) travels back from reset point to rest position.

Double-Pole Single-Throw Double-Make Double-Pole Double-Throw

Specifications subject to change without notice.

2

®

TABLE OF

Contents Introduction Selection Guide

4–5

Snap Action Switches Subminiature DH Series DG Series DR Series DB Series DA Series E61–E64 Series

6–7 8–9 10–11 12–15 16–17 18–20

Subminiature — Sealed DC Series DK Series DCJK Series DJ Series E72–E73 Series

21–23 24–25 26–27 28–29 30–31

Miniature D4 Series D3 Series E21–E36 Series E51–E53 Series K Series

32–35 36–38 39–41 42–43 44–45

General Purpose GP Series E13–E20 Series

46–49 50–52

Panel Mount Switches Panel Mount/Line Interrupt E65–E/F79 Series F80 Series

53–55 56–57

Rocker Switches CR Series SR Series LR Series TR Series WR Series GR Series RR Series

58–59 60–61 62–63 64–65 66–67 68–69 70–71

Other Switches Keyswitches, etc.

72–73

Technical Section Glossary/Tech Info

74–75

3

SNAP-ACTION SWITCH

Selection Guide

DG

Subminiature

3A 125VAC



DH

Subminiature

500mA @30VDC

E6x

Subminiature

13A 125VAC

DK

Subminiature

2A DC* 12V

DCJK

Subminiature

10A 250VAC

DJ

Subminiature

2A DC* 12V

E7x

Subminiature

10.1A 125/250VAC

DC

Subminiature

10.1A 125/250VAC







D3

Miniature

16(4)A 250V





D4

Miniature

21(8)A 250VAC





E5x

Miniature

6A 250VAC

E Miniature

Miniature

25A 125/250VAC

K

Miniature

25A 250VAC

E General Purpose

General Purpose

30.1A 125/250VAC

Panel Mount

16A 125/250VAC



Line Interrupt

16A 125/250VAC



F80

*DR, DK and DJ Series: 2A@12VDC

0.374 (9.50)

120









0.256 (6.50)

85







0.157 (3.99)

70







0.375 (9.53)

130

IP65 (IP67 on request)

N/A

IP67 IP67

IP40























































105











0.375 (9.53)

120







N/A

85







0.625 (15.88)

85









0.375 (9.53)

120











0.875 (22.2)

85











0.875 (22.2)

150











0.937 (23.8)

85











0.875 (22.2)

150









0.875 (22.2)

200









1.00 (25.4)

150











N/A

85











N/A

85



















IP67



Roller





Simulated Roller







Flat Lever





Wire Form

10.1A 125/250VAC





Button Only

Subminiature

85



Lead Wires

DB

0.375 (9.53)

Actuator Types

DIN





Quick Connect



Solder Terminals



PC

0.1A 125VAC

Screw

Subminiature



Line Interrupt

DA

Terminals



NC

105

2A DC* 12V

NO

Max. Temperature (°C)

N/A

Subminiature

DPDT

Mounting Centerline Spacing Inches (mm)

IP40

DR

SPDT

Degree of Protection



Switch Type (Size)

SPST

PC Mount

Threaded Ferrule

Mounting Holes

VDE Approved

Poles / Throws

Series Name

E Panel Mount

4

Max. Current Rating

Snap-In

Mounting















































































































































®

PANEL MOUNT ROCKER SWITCH

Selection Guide

1.20 x 0.433 (30.4 x 11.0)

















● 16A 16A ●

WR

1.19 x 0.867 (30.2 x 22.0)















● 16A 16A ●

RR

Round 0.787 (20.0) dia.



GR

1.13 x 0.535



















10A 6A



10A 8A ●



15A 10A ●











Curved

TR



2 Color





































































Flat



CSA











VDE











10A 8A ●

Actuator Types

UL





Wire Leads

0.760 x 0.508 (19.3 x 12.9)



Quick Connect 0.248″ (6.3mm)

SR



Approvals

PC thru Hole Right Angle



Solder Tab

0.760 x 0.508 (19.3 x 12.9)

20A 16A ● IP42



Solder 2.09″ x 1.06″ (52.09mm x 26.92mm)

LR

PC thru Hole Straight



PC thru Hole Left Angle



Quick Connect 0.187″ (4.8mm)

1.13 (28.8) x variable

Degree of Protection Available

Lighted Available

Amp Rating@250VAC

Amp Rating@125VAC

On–Off-(On)

(On)–Off–(On)

On–Off–On

On–(On)

On–On

(On)–Off

On–Off

DPDT



SPDT



Terminals

SPST

Panel Cut-Out Approx Inches (mm)

Ratings

CR

Series Name

DPST

Circuitry

5

SUBMINIATURE

DH Series Features ●

Ultraminiature dimensions, just 0.323″ x 0.106″ x 0.244″ (8.2mm x 2.7mm x 6.2mm)



Specially designed for low switching currents and voltages



Available with or without integrated auxiliary actuator



Can be fitted to circuit boards in upright position or horizontally with formed terminals

Stainless steel

Gold-plated silver alloy contacts

Thermoplastic polyester base

Common terminal NC terminal

NO terminal

Electrical Ratings Switch Series

Electrical Rating

DH3 DH4

50 to 300mA@30VDC 5 to 50mA@30VDC

Specifications Electrical

Temperature Rating: Flammability Rating:

-25°C to +70°C UL94V-O

Materials

Base: Button: Cover: Auxiliary Actuator: Terminals: Contacts:

PPS PBT PBT Stainless Steel Silver-Plated Brass Silver-Plated Brass (DH3) Gold-Plated Brass (DH4)

PBT = Polybutyleneterephthalate • PPS = Polyphenylene Sulphide

®

PCB Layout inches (mm)

Dimensions inches (mm)

0.106 (2.7)

(TOP VIEW) 0.157 (4.0)

Rest Position

(2)–ø 0.070 (2)–(ø1.80)

0.098 (2.5) 0.134 (3.4)

Operating Point

0.207 (5.25)

0.006 (0.15) 0.196 (4.97) 0.181 (4.6)

Tolerance: ±0.002 (±0.05)

0.323 (8.2)

0.211 (5.35) 0.252 (6.4)

ø0.039 (ø1.00)

Ø0 . (Ø 063 + 1.6 0. +8 319 .1)

0.118 (3.0)

0.063±0.004 (1.6±0.1)

Reference Line 0.098 (2.5)

Mounting

0.047±0.004 (1.2±0.1)

0.157±0.004 (4.0±0.1) 0.098 (2.5)

0.098 (2.5)

0.098 (2.5)

0.023±.002 (0.6±0.05)

Recommended mounting screw: M1.6. Recommended torque: 9.81 cN•M (1.0 kgf•cm). Recommended use of a flat washer and a spring washer for locking.

Actuator Specifications Maximum Operating Force (gms.)

Maximum Pre-Travel inches (mm)

Operating Point inches (mm)

Minimum Over-Travel inches (mm)

Max. Movement Differential inches (mm)

AA

90

LA

50

0.008 (0.2) 0.051 (1.3)

0.220±0.006 (5.6±0.15) 0.264±0.020 (6.7±0.5)

0.004 (0.1) 0.012 (0.3)

0.003 (0.07) 0.024 (0.6)

Actuator Type

Switch Type

Ordering Information DH Series/Prefix

3

C Code Contact Configuration C SPDT

Code Current Rating 3 50 to 300mA@30VDC 4 5 to 50mA@30VDC

Specifications subject to change without notice.

B1 Code Terminal Type inches (mm) B1 0.051 x 0.122 x 0.020 (1.3 x 3.1 x 0.5) Solder, Straight C4 0.025 x 0.122 x 0.020 (0.6 x 3.1 x 0.5) PCB, Straight C5 0.025 x 0.122 x 0.020 (0.6 x 3.1 x 0.5) PCB, RH Side C6 0.025 x 0.122 x 0.020 (0.6 x 3.1 x 0.5) PCB, LH Side

AA Terminal Configuration

Code Actuator Type AA Button LA Simulated Roller

7

SUBMINIATURE

DG Series Features ●

Small dimensions, just 0.504″ x 0.228″ x 0.256″ (12.8mm x 5.8mm x 6.5mm)



Depending on model, contact rating is suitable for low switched currents and voltages for light-current applications with loads of up to 3 amps 125VAC



Available with or without auxiliary actuator



Can be fitted to circuit boards in upright position or horizontally with terminals on left or right



Mechanical life: min. 1 x 106 operations (depending on model)

PBT actuating button

PBT cover

Silver-nickel or gold contacts

PPHS base

Silver-plated copper-zinc terminals NC terminal

NO terminal

Common terminal

Electrical Ratings Switch Series

EN61058 Rating

DG1 DG2 DG4

N/A N/A N/A

UL1054 Rating

Electrical Life at Rated Load According to UL (Min. Operations)

3A, 125VAC; 2A, 30VDC 0.05A, 30VDC 1A, 125VAC; 1A, 30VDC

6,000 6,000 6,000

Specifications Electrical

Temperature Rating: Flammability Rating:

-25 °C to +85 °C UL9V-O

Materials

Base: Cover: Actuator: Auxiliary Actuator: Terminals: Contacts:

PPHS PBT PBT Stainless Steel Silver-Plated Brass Silver Alloy (DG1, DG4) Gold Flash, Gold (DG2)

PBT = Polybutyleneterephthalate • PPHS = Polyphenylene sulphide

®

Dimensions inches (mm)

Auxiliary Actuators inches (mm)

Operating Point Rest Position

Rest Position max 0.232 (5.9) Operating Point 0.213±0.008 (5.4±0.2) 0.504 (12.8)

0.171 (4.35)

0.197 (5.0)

0.079 (2.0)

0.110 (2.8)

Operating Point 0.059 (1.5)

Rest Position 0.055 (1.4)

0.079 (2.0)

0.228 (5.8)

0.087 (2.2) 0.256 (6.5)

0.200 (5.08)

0.200 (5.08)

Terminal Options inches (mm) PCB Terminals Straight

PCB Terminals RH Side

PCB Terminals LH Side

Drilling Pattern

0.024 (0.6)

0.035 (0.9)

0.200 (5.08)

0.047 ±0.004 (1.2 ±0.1)

0.024 (0.6)

0.071 (1.8)

0.024 (0.6)

0.138 (3.5)

0.035 (0.9)

0.071 (1.8)

0.035 (0.9)

0.200 (5.08)

0.122 (3.1)

0.122 (3.1)

Actuator Specifications Maximum Operating Force (gms.) Actuator Switch Type Type

DG1, DG2 (B)

DG2, DG4 (C)

AA

140

75

LA

45

30

RA

60

35

Maximum Pre-Travel inches (mm)

Operating Point inches (mm)

Maximum Max. Movement Max.Rest Over-Travel Differential Position inches inches inches (mm) (mm) (mm)

0.020 0.213±0.008 0.008 (0.51) (5.41±0.20) (2.20) 0.071 0.268+0.031/-0.016 0.022 (1.80) (6.81+0.79/-0.41) (0.55) 0.059 0.488±0.020 0.022 (1.50) (12.40±0.51) (0.55)

0.007 (0.18) 0.020 (0.51) 0.020 (0.51)

— — 0.196 (4.98) 0.322 (8.18)

Ordering Information DG

1

Series/Prefix

Code 1 2 4

3 Code Contact Configuration 3 SPDT

Current Rating (UL & CSA) 3A, 125VAC; 2A, 30VDC 0.05A, 30VDC 1A, 125VAC; 1A, 30VDC

Specifications subject to change without notice.

B

1 AA

Code Button Color/ Operating Force B Grey / 140 grams* C Black / 75 grams** *140 gms not available on DG4 **75 gms not available on DG1

Code 1 2 3

Terminal Type PCB, Straight PCB, RH Side PCB, LH Side

Code AA LA LB LC RA

Actuator Type Button (without Auxiliary Actuator) Straight Auxiliary Actuator, 0.169″ (4.3mm) Long* Straight Auxiliary Actuator, 0.500″ (12.7mm) Long* Straight Auxiliary Actuator, 1.012″ (25.7mm) Long* Roller Auxiliary Actuator, 0.075″ (1.9mm) Long*

Actuator Length

*Actuator lengths are dimensioned from center line of switch mounting hole.

9

SUBMINIATURE

DR Series Features ●

Switch with mushroom or pan-head actuator for a wide variety of control applications



Protection against dust complying with IP40



Models available for operating temperatures up to 105°C



Rated for 5mA@12VDC or 2A@12VDC



Auxiliary actuator on request



High contact stability thanks to gold alloy crosspoint contacts



Mechanical life: min. 1 x 106 operations



Various options available for connecting

Stainless steel spring

POM actuating button

Gold-plated beryllium copper blade Gold crosspoint contacts PBT base and cover

Stainless steel internal actuator Silver-plated copper zinc terminals NC terminal

NO terminal

Common terminal

Specifications Electrical

Temperature Rating: Flammability Rating:

-40°C to +85°C N/A

Materials

Housing: Actuator: Auxiliary Actuator: Internal Actuator: Spring: Terminals: Contacts: Moving Blade:

PBT POM (+85°C) Stainless Steel Stainless Steel Stainless Steel Silver-Plated Copper-Zinc Gold Crosspoint Gold-Plated Beryllium Copper

PBT = Polybutyleneterephthalate • POM = Polyacetal

®

Dimensions inches (mm) Mushroom Actuator

Pan-head Actuator

0.146 (3.7) 0.213 (5.4)

0.197 (5.0)

0.197 (5.0)

0.213 (5.4)

0.146 (3.7) 0.268 (6.8)

0.061 (1.55)

0.539 (13.7) 0.459 (11.65)

0.061 (1.55)

0.539 (13.7) 0.459 (11.65)

Rest Position max 0.165 (4.2) Operating Point 0.138 ±0.008 (3.5 ±0.2)

0.268 (6.8)

Rest Position max 0.200 (5.0) Operating Point 0.169 ±0.008 (4.3 ±0.2)

ø0.087 (ø2.2)

0.375 (9.53)

0.102 (2.6)

ø0.087 (ø2.2)

0.102 (2.6)

0.375 (9.53) 0.456 (11.58)

0.456 (11.58)

Terminal Options inches (mm) PCB Terminals — Straight 0.098 (2.5)

0.024 x 0.020 (0.6 x 0.5)

0.105 (2.67)

PCB Terminals LH Side with Location Pins

0.024 x 0.020 (0.6 x 0.5)

0.024 x 0.020 (0.6 x 0.5)

0.197 (5.0)

0.200 (5.08)

0.230 (5.85)

0.197 (5.0) 0.230 (5.85)

0.024 (0.6)

0.200 (5.08)

0.112 (2.85)

Solder Terminals

Drilling Patterns for PCB Terminals

0.098 x 0.020 (2.5 x 0.5)

(Side and Underside) 0.024 x 0.020 (0.6 x 0.5)

0.067 (1.7)

0.070 (1.77)

PCB Terminals RH Side with Location Pins

Ø0.051 +0.004 (Ø1.30 +0.10)

0.112 (2.85)

Top-down View of Lateral Terminals

Left

Right

0.098 (2.5)

0.163 (4.13)

0.200 0.200 (5.08) (5.08)

0.163 (4.13)

Ordering Information DR

1

Series/Prefix

P

BR AO

Code Actuator Shape P Mushroom R Pan-head

Code Current Rating 1 0.005A@12VDC or 2A@12VDC

Specifications subject to change without notice.

Code Actuator Type AO without Auxiliary Actuator

Code AN AL AR BN BL BR CR DL

Terminal Type inches (mm) 0.098 x 0.020 (2.5 x 0.5) Solder w/o Pins 0.098 x 0.020 (2.5 x 0.5) Solder with LH Pins 0.098 x 0.020 (2.5 x 0.5) Solder with RH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight w/o Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight with LH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight with RH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, RH Side with RH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, LH Side with LH Pins

11

SUBMINIATURE

DB Series Features ●

High-precision switch with high repeat accuracy



Models available for operating temperatures up to 120°C



Rated for currents up to 10 amp at 250VAC



Range of auxiliary actuators available (can also be retrofitted); two mounting positions



Variety of contact materials available to suit your application



Mechanical life: up to 15 x 106 operations



Wide variety of terminal types available



Numerous approvals

POM actuating button

PBT cover

Silver-alloy gold crosspoint contacts Stainless steel spring

PET base NC terminal

Silver-plated copper-zinc terminals

NO terminal Common terminal

Electrical Ratings Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

DB1 DB2 DB3 DB5* DB6* DB7*

6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V~ 1A, 250V~ 6A, 250V~ 10(1.5A), 400V~

5A, 125/250VAC 10.1A, 125/250VAC; 1/4HP, 125VAC 0.1A,125/250VAC 1A, 125/250VAC 5A, 125/250VAC 10.1A, 125/250VAC; 1/4HP, 125VAC

10,000 10,000 50,000 50,000 50,000 50,000

*85°C vs. T85.

Specifications Electrical

Temperature Rating: Flammability Rating:

-40°C to +85°C / +120°C UL94V-O (PBT, PET) UL94HB (POM)

Materials

Base: Cover: Actuator: Auxiliary Actuator: Terminals: Contacts:

PET PBT PBT, POM Stainless Steel or Plastic Silver-Plated Copper-Zinc Silver Alloy Gold Crosspoint

PBT = Polybutyleneterephthalate • PET = Polyethyleneterephthalate • POM = Polyacetal

6,000 6,000 6,000 6,000 6,000 6,000

®

Dimensions inches (mm)

Auxiliary Actuator inches (mm) Straight

Rest position 0.366 (9.3 max.)

Operating Point Rest Position

»L« ±0.031 (0.8)

Operating point 0.331± 0.012 (8.4±0.3) 0.787 max. (20.0)

ø 0.087 (2.2) 0.138 (3.5)

0.262 (6.65)

0.295 (7.5)

0.107 (2.73)

0.295 (7.5)

ø0.189 (4.8)

≤0.217 (5.5)

0.093 (2.35)

0.098 (2.5)

Roller »L« ±0.031 (0.8)

0.256 (6.5)

0.130 (3.3)

0.287 (7.3) 0.272 (6.9) 0.087 (2.2)

High Ratio (HR) Standard Ratio (SR)

0.295 (7.5) 0.374 (9.5)

0.205 (5.2) 0.138 (3.5)

Simulated Roller »L« ±0.031 (0.8)

R 0.098 (2.5)

Terminal Options inches (mm)

0.138 (3.5)

0.126 (3.2) 0.071 (1.8) 0.024 (1.3)

0.122 (3.1)

PCB Terminals RH Side with Location Pins 0.024 x 0.020 (0.6 x 0.5) 0.110 (2.8) 0.200 (5.08)

0.266 (6.75)

0.138 (3.5)

Drilling Patterns for PCB Terminals 0.051 x 0.020 (1.3 x 0.5) Ø0.063 (1.6)

0.200 (5.08)

0.266 (6.75)

0.138 (3.5)

0.200 (5.08)

0.138 (3.5)

PCB Terminals LH Side with Location Pins 0.024 x 0.020 (0.6 x 0.5)

Simulated Roller – Plastic

Right

0.266 (6.75)

Drilling Patterns for PCB Terminals (Lateral with Location Pins) 0.024 x 0.020 (0.6 x 0.5) Ø0.067 (1.7)

0.374 (9.5)

Ø0.051 (1.3) 0.295 0.295 (7.5) (7.5)

Ø0.051 (1.3) 0.295 0.295 (7.5) (7.5)

ø0.197 (5.0)

0.266 (6.75)

Left

Drilling Patterns for PCB Terminals (Straight/Lateral w/o Location Pins) 0.024 x 0.020 (0.6 x 0.5)

»L« ±0.031 (0.8)

Top-down View of Lateral Terminals

0.110 (2.8) 0.200 (5.08)

0.138 (3.5)

Roller – Plastic

0.220 (5.6)

0.122 (3.1)

PCB Terminals LH Side w/o Location Pins 0.024 x 0.020 (0.6 x 0.5)

0.295 0.295 (7.5) (7.5)

0.107 (2.73) 0.200 (5.08)

»L« ±0.031 (0.8)

R2

0.138 (3.5)

PCB Terminals RH Side w/o Location Pins 0.024 x 0.020 (0.6 x 0.5)

0.114 (2.9)

0.110 (2.8)

0.110 (2.8)

PCB Terminals – Straight 0.036 x 0.020 (0.6 x 0.5)

0.024 (0.6)

Straight – Plastic »L« ±0.031 (0.8)

0.122 (3.1)

0.047 (1.2)

PCB Terminals – Straight 0.236 x 0.020 (1.3 x 0.5) 0.122 (3.1)

Solder Terminals – Short

0.287 (7.3)

QC Terminals 0.110 x 0.020 (2.8 x 0.5)

Contact Ratings at Direct Voltage Switching Voltage

Switched Current Resistive Load DB1 DB2

Inductive Load L/R=3ms DB1 DB2

12V 24V 60V 110V 220V

6A 10A 3A 5A 1A 1A 0.5A 0.5A 0.25A 0.25A

6A 10A 2A 4A 0.5A 0.5A 0.2A 0.2A 0.1A 0.1A 13

Actuator Specifications — Standard Ratio Actuator Code

Switch Type

Maximum Operating Force (gms.)

AA

DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7

70 150 150 250 280 70 150 250 250 280

0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039 0.039

DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7

30 60 60 100 115 25 50 50 85 100 9 18 18 — 30 65 65 110 125 25 55 55 95 110 9 20 20 — 30 65 65 110 125 25 55 55 95 110 9 20 20 — 24 50 50 85 100 18 38 38 63 75 25 55 55 90 105 25 55 55 90 105

0.157 (4.0) 0.157 (4.0) 0.157 (4.0) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.197 (5.0) 0.197 (5.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) — 0.157 (4.0) 0.157 (4.0) 0.157 (4.0) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.197 (5.0) 0.197 (5.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) — 0.157 (4.0) 0.157 (4.0) 0.157 (4.0) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.197 (5.0) 0.197 (5.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) — 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.236 (6.0) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5) 0.177 (4.5)

BA

LB

LC

LD

SB

SC

SD

RB

RC

RD

WB*

WC*

VB*

ZB*

*For 85°C only

14

Maximum Pre-Travel inches (mm)

(1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0) (1.0)

Operating Point inches (mm)

Minimum Over-Travel inches (mm)

0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) 0.331±0.012 (8.4±0.3) 0.024 (0.6) Auxiliary actuator, rear-mounted (RM) 0.421±0.051 (10.7±1.3) 0.079 (2.0) 0.421±0.051 (10.7±1.3) 0.079 (2.0) 0.421±0.051 (10.7±1.3) 0.079 (2.0) 0.421±0.063 (10.7±1.6) 0.059 (1.5) 0.421±0.063 (10.7±1.6) 0.059 (1.5) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.071 (11.1±1.8) 0.059 (1.5) 0.437±0.071 (11.1±1.8) 0.059 (1.5) 0.512±0.138 (13.0±3.5) 0.157 (4.0) 0.512±0.138 (13.0±3.5) 0.157 (4.0) 0.512±0.138 (13.0±3.5) 0.157 (4.0) — — 0.630±0.051 (16.0±1.3) 0.079 (2.0) 0.630±0.051 (16.0±1.3) 0.079 (2.0) 0.630±0.051 (16.0±1.3) 0.079 (2.0) 0.630±0.063 (16.0±1.6) 0.059 (1.5) 0.630±0.063 (16.0±1.6) 0.059 (1.5) 0.646±0.059 (16.4±1.5) 0.079 (2.0) 0.646±0.059 (16.4±1.5) 0.079 (2.0) 0.646±0.059 (16.4±1.5) 0.079 (2.0) 0.646±0.071 (16.4±1.8) 0.059 (1.5) 0.646±0.071 (16.4±1.8) 0.059 (1.5) 0.720±0.138 (18.3±3.5) 0.157 (4.0) 0.720±0.138 (18.3±3.5) 0.157 (4.0) 0.720±0.138 (18.3±3.5) 0.157 (4.0) — — 0.622±0.051 (15.8±1.3) 0.079 (2.0) 0.622±0.051 (15.8±1.3) 0.079 (2.0) 0.622±0.051 (15.8±1.3) 0.079 (2.0) 0.622±0.063 (15.8±1.6) 0.059 (1.5) 0.622±0.063 (15.8±1.6) 0.059 (1.5) 0.638±0.059 (16.2±1.5) 0.079 (2.0) 0.638±0.059 (16.2±1.5) 0.079 (2.0) 0.638±0.059 (16.2±1.5) 0.079 (2.0) 0.638±0.071 (16.2±1.8) 0.059 (1.5) 0.638±0.071 (16.2±1.8) 0.059 (1.5) 0.713±0.138 (18.1±3.5) 0.157 (4.0) 0.713±0.138 (18.1±3.5) 0.157 (4.0) 0.713±0.138 (18.1±3.5) 0.157 (4.0) — — 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.437±0.059 (11.1±1.5) 0.079 (2.0) 0.480±0.071 (12.2±1.8) 0.118 (3.0) 0.480±0.071 (12.2±1.8) 0.118 (3.0) 0.480±0.071 (12.2±1.8) 0.118 (3.0) 0.480±0.071 (12.2±1.8) 0.118 (3.0) 0.480±0.071 (12.2±1.8) 0.118 (3.0) 0.469±0.055 (11.9±1.4) 0.079 (2.0) 0.469±0.055 (11.9±1.4) 0.079 (2.0) 0.469±0.055 (11.9±1.4) 0.079 (2.0) 0.469±0.055 (11.9±1.4) 0.079 (2.0) 0.469±0.055 (11.9±1.4) 0.079 (2.0) 0.630±0.055 (16.0±1.4) 0.059 (1.5) 0.630±0.055 (16.0±1.4) 0.059 (1.5) 0.630±0.055 (16.0±1.4) 0.059 (1.5) 0.630±0.055 (16.0±1.4) 0.059 (1.5) 0.630±0.055 (16.0±1.4) 0.059 (1.5)

Max. Movement Differential inches (mm)

0.004 0.004 0.006 0.004 0.006 0.004 0.004 0.006 0.004 0.006

(0.10) (0.10) (0.15) (0.10) (0.15) (0.10) (0.10) (0.15) (0.10) (0.15)

0.020 (0.5) 0.020 (0.5) 0.030 (0.75) 0.028 (0.70) 0.030 (0.75) 0.024 (0.6) 0.024 (0.6) 0.047 (1.2) 0.039 (1.0) 0.047 (1.2) 0.177 (4.5) 0.177 (4.5) 0.268 (6.8) — 0.020 (0.5) 0.020 (0.5) 0.043 (1.1) 0.028 (0.7) 0.043 (1.1) 0.024 (0.6) 0.024 (0.6) 0.047 (1.2) 0.039 (1.0) 0.047 (1.2) 0.177 (4.5) 0.177 (4.5) 0.268 (6.8) — 0.020 (0.5) 0.020 (0.5) 0.030 (0.75) 0.028 (0.7) 0.030 (0.75) 0.024 (0.6) 0.024 (0.6) 0.047 (1.2) 0.039 (1.0) 0.047 (1.2) 0.177 (4.5) 0.177 (4.5) 0.268 (6.8) — 0.024 (0.6) 0.024 (0.6) 0.035 (0.9) 0.024 (0.6) 0.035 (0.9) 0.031 (0.8) 0.031 (0.8) 0.047 (1.2) 0.031 (0.8) 0.047 (1.2) 0.024 (0.6) 0.024 (0.6) 0.035 (0.9) 0.024 (0.6) 0.035 (0.9) 0.024 (0.6) 0.024 (0.6) 0.035 (0.9) 0.024 (0.6) 0.035 (0.9)

Max. Rest Position inches (mm)

0.366 0.366 0.366 0.366 0.366 0.366 0.366 0.366 0.366 0.366

(9.3) (9.3) (9.3) (9.3) (9.3) (9.3) (9.3) (9.3) (9.3) (9.3)

0.551 (14.0) 0.551 (14.0) 0.551 (14.0) 0.551 (14.0) 0.551 (14.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) — 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 1.260 (32.0) 1.260 (32.0) 1.260 (32.0) — 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 1.260 (32.0) 1.260 (32.0) 1.260 (32.0) — 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.669 (17.0) 0.669 (17.0) 0.669 (17.0) 0.669 (17.0) 0.669 (17.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.591 (15.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0) 0.748 (19.0)

Actuation Length inches (mm)

— — — — — — — — — — — — 0.189 (4.8) — — — — 0.276 (7.0) — — — 1.654 (42.0) — on request — — 0.098 (2.5) — — — — 0.185 (4.7) — — — 1.563 (39.7) — on request — — 0.098 (2.5) — — — — 0.185 (4.7) — — — 1.563 (39.7) — on request — — 0.276 (7.0) — — — — 0.551 (14.0) — — — — 0.220 (5.6) — — — — 0.205 (5.2) — —

®

Actuator Specifications — High Ratio Actuator Code

Switch Type

Maximum Operating Force (gms.)

Maximum Pre-Travel inches (mm)

MB

DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2/7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7 DB5 DB1/3 DB6 DB2 DB7

12 25 25 40 45 10 22 22 35 40 4 9 9 — 14 30 30 50 56 12 25 25 40 45 4 9 9 — 14 30 30 50 56 12 25 25 40 45 4 9 9 — 10 21 21 36 42 7 16 16 26 30 11 23 23 29 45 11 23 23 39 45

0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) — 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) — 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) — 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.394 (10.0) 0.512 (13.0) 0.512 (13.0) 0.512 (13.0) 0.512 (13.0) 0.512 (13.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0) 0.354 (9.0)

MC

MD

UB

UC

UD

TB

TC

TD

GB*

GC*

HB*

OB*

Operating Point inches (mm)

Minimum Over-Travel inches (mm)

Auxiliary actuator, front-mounted (FM) 0.472±0.098 (12.0±2.5) 0.138 (3.5) 0.472±0.098 (12.0±2.5) 0.138 (3.5) 0.472±0.098 (12.0±2.5) 0.138 (3.5) 0.472±0.118 (12.0±3.0) 0.138 (3.5) 0.472±0.118 (12.0±3.0) 0.138 (3.5) 0.492±0.118 (12.5±3.0) 0.157 (4.0) 0.492±0.118 (12.5±3.0) 0.157 (4.0) 0.492±0.118 (12.5±3.0) 0.157 (4.0) 0.492±0.138 (12.5±3.5) 0.157 (4.0) 0.492±0.138 (12.5±3.5) 0.157 (4.0) 0.709±0.315 (18.0±8.0) 0.394 (10.0) 0.709±0.315 (18.0±8.0) 0.394 (10.0) 0.709±0.315 (18.0±8.0) 0.394 (10.0) — — 0.677±0.098 (17.2±2.5) 0.138 (3.5) 0.677±0.098 (17.2±2.5) 0.138 (3.5) 0.677±0.098 (17.2±2.5) 0.138 (3.5) 0.677±0.118 (17.2±3.0) 0.138 (3.5) 0.677±0.118 (17.2±3.0) 0.138 (3.5) 0.697±0.118 (17.7±3.0) 0.157 (4.0) 0.697±0.118 (17.7±3.0) 0.157 (4.0) 0.697±0.118 (17.7±3.0) 0.157 (4.0) 0.697±0.138 (17.7±3.5) 0.157 (4.0) 0.697±0.138 (17.7±3.5) 0.157 (4.0) 0.913±0.315 (23.2±8.0) 0.394 (10.0) 0.913±0.315 (23.2±8.0) 0.394 (10.0) 0.913±0.315 (23.2±8.0) 0.394 (10.0) — — 0.669±0.098 (17.0±2.5) 0.138 (3.5) 0.669±0.098 (17.0±2.5) 0.138 (3.5) 0.669±0.098 (17.0±2.5) 0.138 (3.5) 0.669±0.118 (17.0±3.0) 0.138 (3.5) 0.669±0.118 (17.0±3.0) 0.138 (3.5) 0.689±0.118 (17.5±3.0) 0.157 (4.0) 0.689±0.118 (17.5±3.0) 0.157 (4.0) 0.689±0.118 (17.5±3.0) 0.157 (4.0) 0.689±0.138 (17.5±3.5) 0.157 (4.0) 0.689±0.138 (17.5±3.5) 0.157 (4.0) 0.906±0.315 (23.0±8.0) 0.394 (10.0) 0.906±0.315 (23.0±8.0) 0.394 (10.0) 0.906±0.315 (23.0±8.0) 0.394 (10.0) — — 0.508±0.102 (12.9±2.6) 0.118 (3.0) 0.508±0.102 (12.9±2.6) 0.118 (3.0) 0.508±0.102 (12.9±2.6) 0.118 (3.0) 0.508±0.102 (12.9±2.6) 0.118 (3.0) 0.508±0.102 (12.9±2.6) 0.118 (3.0) 0.571±0.142 (14.5±3.6) 0.157 (4.0) 0.571±0.142 (14.5±3.6) 0.157 (4.0) 0.571±0.142 (14.5±3.6) 0.157 (4.0) 0.571±0.142 (14.5±3.6) 0.157 (4.0) 0.571±0.142 (14.5±3.6) 0.157 (4.0) 0.531±0.098 (13.5±2.5) 0.098 (2.5) 0.531±0.098 (13.5±2.5) 0.098 (2.5) 0.531±0.098 (13.5±2.5) 0.098 (2.5) 0.531±0.098 (13.5±2.5) 0.098 (2.5) 0.531±0.098 (13.5±2.5) 0.098 (2.5) 0.693±0.098 (17.6±2.5) 0.079 (2.0) 0.693±0.098 (17.6±2.5) 0.079 (2.0) 0.693±0.098 (17.6±2.5) 0.079 (2.0) 0.693±0.098 (17.6±2.5) 0.079 (2.0) 0.693±0.098 (17.6±2.5) 0.079 (2.0)

Max. Movement Differential inches (mm)

Max. Rest Position inches (mm)

Actuation Length inches (mm)

0.047 (1.2) 0.047 (1.2) 0.071 (1.8) 0.059 (1.5) 0.071 (1.8) 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.071 (1.8) 0.083 (2.1) 0.236 (6.0) 0.236 (6.0) 0.354 (9.0) — 0.047 (1.2) 0.047 (1.2) 0.071 (1.8) 0.059 (1.5) 0.071 (1.8) 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.071 (1.8) 0.083 (2.1) 0.236 (6.0) 0.236 (6.0) 0.354 (9.0) — 0.047 (1.2) 0.047 (1.2) 0.071 (1.8) 0.059 (1.5) 0.071 (1.8) 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.071 (1.8) 0.083 (2.1) 0.236 (6.0) 0.236 (6.0) 0.354 (9.0) — 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.055 (1.4) 0.083 (2.1) 0.071 (1.8) 0.071 (1.8) 0.083 (2.4) 0.071 (1.8) 0.094 (2.4) 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.055 (1.4) 0.083 (2.1) 0.055 (1.4) 0.055 (1.4) 0.083 (2.1) 0.055 (1.4) 0.083 (2.1)

0.709 (18.0) 0.709 (18.0) 0.709 (18.0) 0.709 (18.0) 0.709 (18.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 1.575 (40.0) 1.575 (40.0) 1.575 (40.0) — 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 1.732 (44.0) 1.732 (44.0) 1.732 (44.0) — 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.866 (22.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 1.732 (44.0) 1.732 (44.0) 1.732 (44.0) — 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.945 (24.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.787 (20.0) 0.906 (23.0) 0.906 (23.0) 0.906 (23.0) 0.906 (23.0) 0.906 (23.0)

— — 0.276 (7.0) — — — — 0.370 (9.4) — — — 1.713 (43.5) — on request — — 0.185 (4.7) — — — — 0.280 (7.1) — — — 1.622 (41.2) — on request — — 0.185 (4.7) — — — — 0.280 (7.1) — — — 1.622 (41.2) — on request — — 0.370 (9.4) — — — — 0.638 (16.2) — — — — 0.311 (7.9) — — — — 0.287 (7.3) — —

*For 85°C only

Ordering Information DB

1

B

Series/Prefix Code UL Rating 1054 1 5A,125/250VAC 2 10.1A, 125/250VAC 1/4HP, 125VAC 3 0.1A, 125/250VAC 5* 1A, 125/250VAC 6* 5A, 125/250VAC 7* 10.1A, 125/250VAC 1/4 HP, 125VAC

EN 61058 Rating 6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V 1A, 250V 6A, 250V



Code Contact Configuration +85°C Operating Temp E SPST NO F SPST NC G SPDT +120°C Operating Temp A SPST NO B SPST NC C SPDT

B1 Code B1 A1 C1 D1 D2 D3 D4 D5

AA Terminal Type inches (mm) 0.110 x 0.020 (2.8 x 0.5) QC, Straight Solder, Short 0.051 x 0.020 (1.3 x 0.5) PCB, Straight 0.024 x 0.020 (0.6 x 0.5) PCB, Straight 0.024 x 0.020 (0.6 x 0.5) PCB, RH Side with Location Pins 0.024 x 0.020 (0.6 x 0.5) PCB, LH Side with Location Pins 0.024 x 0.020 (0.6 x 0.5) PCB, RH Side 0.024 x 0.020 (0.6 x 0.5) PCB, LH Side

Code Actuator Type* AA Spherical-head w/o Auxiliary Actuator BA Radius w/o Auxiliary Actuator *For further actuators see Actuation Specifications table.

10 (1.5)A, 250V~

*85°C only Specifications subject to change without notice.

15

SUBMINIATURE

DA Series Features ●

Long life coil spring construction



Standard gold crosspoint contacts (0.1 amp) for low level switching applications

Thermoplastic actuating button Thermoplastic cover and base

Stainless steel spring



Silver contact low voltage DAB version also available. Consult factory.



Five standard terminals to choose from

Gold crosspoint contacts



Automated assembly insures high quality and reliability

Silver-plated terminals



Choice of external snap-on actuators



Custom actuators available



VDE approved

Common terminal NC terminal

Beryllium copper moving blade

NO terminal

Electrical Ratings Switch Series

EN61058 Rating

DA3 DAB

0.1(0.05)A, 50VAC N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

0.1A, 125VAC 5A, 24VDC

50,000 N/A

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C UL94V-O

Materials

Case: Actuating Button: Terminals: Moving Blade: Spring: Auxiliary Actuator: Roller: Contacts:

Thermoplastic Polyester Thermoplastic Acetal Silver-Plated Bronze Silver-Plated Beryllium Copper Copper-Coated Stainless Steel Stainless Steel Stainless Steel Gold Crosspoint (DA3), Silver (DAB)

100,000 6,000

®

Dimensions inches (mm)

PCB Footprint

0.405 (10.29)

Terminals

0.781 (19.84)

C

0.125 (3.18)

0.250 (6.35)

0.344 (8.74)

0.050 (1.27) dia.

0.089 (2.26) Case Opening Diameter

0.081 (2.06) Button Diameter

0.300 + - 0.010 (7.62 + - 0.25)

0.110 (2.79) 0.110 x 0.020 (2.79 x 0.51)

PCB (Code H)

QC (Code F )

0.160 (4.06)

0.250 (6.35)

0.093 (2.36)

0.095 (2.41) 0.101 (2.57)

0.375 (9.53) COM

N.O.

0.352 (8.94)

0.093 (2.36)

0.050 (1.27)

0.093 x 0.020 (2.36 x 0.51)

0.050 x 0.020 (1.27 x .51)

N.C.

0.085 (2.16) 0.091 (2.31)

0.085 (2.16) 0.091 (2.31)

DIN (Code K )

0.405 (10.29)

NC

Actuators Many special forms and lengths of actuators are available. External actuators can be snapped on in either of two locations (standard lever ratio or high lever ratio). Actuation lengths are dimensioned from centerline of switch mounting hole (see drawing).

Reference Line 0.293 (7.44)

0.375 + - 0.005 (9.53 + - 0.13)

0.209 (5.31) 0.075 (1.91)

0.191 (4.85)

NO

0.063 Ø (3) (1.60)

0.058 (1.47) dia.

0.110 (2.79) 0.110 x 0.020 (2.79 x 0.51)

0.330 + - 0.015 Operate (8.38 + - 0.38) Position

0.238 (6.05)

SS (Code D)

QC (Code B)

0.051 (1.30) dia.

0.110 (2.79) 0.110 x 0.020 (2.79 x 0.51)

0.238 (6.05)

CL Actuating Button 0.066 (1.68) Actuation Length

0.191 (4.85) High Ratio

Switch Mounting Hole

Standard Ratio

Actuator Specifications Maximum Operating Force (gms.)

Maximum Pre-Travel inches (mm)

Operating Point inches (mm)

Minimum Over-Travel inches (mm)

Max. Movement Differential inches (mm)

Actuation Length inches (mm)

–AA

90

–LB

27

–MB

9

–RB

30

–TB

10

–SB

30

–UB

10

0.030 (0.76) 0.144 (3.66) 0.416 (10.57) 0.131 (3.33) 0.379 (9.63) 0.131 (3.33) 0.379 (9.63)

0.330±0.015 (8.38±0.38) 0.348±0.060 (8.84±1.52) 0.350±0.173 (8.90±4.39) 0.571±0.054 (14.50±1.37) 0.571±0.173 (14.50±4.39) 0.571±0.054 (14.50±1.37) 0.571±0.173 (14.50±4.39)

0.035 (0.89) 0.054 (1.37) 0.078 (1.98) 0.046 (1.17) 0.067 (1.70) 0.046 (1.17) 0.067 (1.70)

0.007 (0.18) 0.028 (0.71) 0.081 (2.06) 0.025 (0.64) 0.074 (1.88) 0.025 (0.64) 0.074 (1.88)

— — 0.271 (6.88) 0.396 (10.06) 0.201 (5.11) 0.326 (8.28) 0.197 (5.00) 0.322 (8.18)

Actuator Type

Switch Type

Ordering Actuators Separately There are three standard actuators available, plus an extra long actuator which may be used for customizing forms and lengths. To order actuators for the DA3 Series Subminiature Switch, use the actuator part number shown. Actuators may be ordered separately and installed on switches as required.

Standard Lever Actuator for LB and MB Part No. 0014-5576

Circuitry

Mounting

Contact arrangement available in choice of single pole double throw, or single pole single throw, either normally open or normally closed.

Recommended mounting screw size: #2–56 round head. Recommended torque on screw: 2 inch lbs. max. (with flat washer min. 0.240″ [6.10mm] outside diameter).

Simulated Roller Actuator for SB and UB Part No. 0014-5594 3.066 (77.876)

Roller Actuator for RB and TB Part No. 0114-0737

CL

Extra Long Actuator for Customizing Part No. 0014-5519

Ordering Information DA

3

Series/Prefix

Code Current Rating 3 0.1A, 125VAC B 5A, 24VDC

Code A B C

Contact Configuration SPST NO SPST NC SPDT

C

B Code B D F H K

1 Terminal Type inches (mm) 0.110 x 0.020 (2.79 x 0.51) QC 0.110 x 0.020 (2.79 x 0.51) SS 0.093 x 0.020 (2.36 x 0.51) QC 0.050 x 0.020 (1.27 x 0.51) PCB 0.110 x 0.020 (2.79 x 0.51) DIN

Code Terminal Configuration 1 Standard

Specifications subject to change without notice.

A Code AA L M R T S U

A Actuator Type Button Lever Standard Ratio Lever High Ratio Roller Standard Ratio Roller High Ratio Simulated Roller Standard Ratio Simulated Roller High Ratio

Code A — 0.154 (3.91) 0.279 (7.09) -0.061 (-1.55) 0.064 (1.63) 0.110 (2.79) 0.235 (5.97)

Actuation Length inches (mm) B C — — 0.271 (6.88) 0.403 (10.24) 0.396 (10.06) 0.528 (13.41) 0.201 (5.11) 0.330 (8.38) 0.326 (8.28) 0.455 (11.56) 0.197 (5.00) 0.258 (6.55) 0.322 (8.18) 0.383 (9.73)

Actuation lengths are dimensioned from center line of switch mounting hole. Refer to dimensional drawing.

17

SUBMINIATURE

E Series Features ●

4 current ratings



Choice of actuator



5 terminal types



3 contact arrangements



Long life coil spring mechanism



DC ratings available upon request



High-temperature version available

Thermoplastic actuating button Copper alloy blade

Stainless steel spring

Silver contacts or gold crosspoint contacts

Subminiature modules take less space than individual subminiature switches fastened side-by-side. For applications requiring 2, 3, 4 or 5-circuit control in a compact space, the special molded case design helps speed assembly since there is only one part to handle and install rather than 2, 3, 4 or 5 individual switches.

Thermoplastic case NC terminal

Common terminal

NO terminal

Electrical Ratings Switch Series

EN61058 Rating

E61

N/A

E62 E63

N/A N/A

E64

N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

5A, 125/250VAC 5A, 30VDC (optional) 10.1A, 125/250VAC; 1/4HP, 125VAC 0.1A, 125VAC 0.25A, 30VDC (optional) 13A, 125VAC; 10.1A, 250VAC

N/A

6,000*

N/A N/A

6,000 6,000

N/A

6,000

*Indicates 100K life available.

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C, +130° optional using thermoset material UL94HB

Materials

Case: Actuating Button: Terminals: Moving Blade: Spring: Auxiliary Actuator: Contacts:

Thermoplastic Thermoplastic Acetal Silver-Plated Commercial Bronze Beryllium Copper Stainless Steel Cold Rolled Steel (Nickel-Plated) Fine Silver (except E63 — Gold Crosspoint)

®

Dimensions inches (mm)

0.093 (2.36)

PCB Footprint

Terminals

0.781 (19.84)

QC 0.250 (6.35)

0.250 (6.35)

NC

0.197 (5.00) — PCB Terminals Lateral to Case or Cover 0.237 (6.02) — PCB Terminals Straight Down Only

0.125 (3.18)

Nominal Operate Position

0.087 (2.21) 0.095 (2.41)

COM

N.O.

Reference Line

N.C.

0.087 (2.21) Dia. Hole 0.095 (2.41) 0.375 + - 0.005 (9.53 + - 0.13)

0.093 (2.36) 0.094 (2.39) 0.109 (2.77) 0.073 (1.85)

0.143 (3.63)

0.093 (2.36)

0.300 (7.62)

0.352 (8.94)

NO 0.405 (10.29)

0.058 (1.47)

0.093 (2.36)

0.375 (9.53)

C 0.063 (1.60) Ø (3)

Short Solder

0.405 (10.29)

Actuators

–00A

–10A

QC

Barrel 0.177 (4.50)

0.344 (8.74)

0.050 (1.27)

0.110 (2.79)

0.073 (1.85) I.D. with 0.032 (0.81) Clinch Opening

–30A

–40A

Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown.

PCB 0.133 (3.378) Standard Actuator Width 0.160 (4.06)

0.191 (4.85)

0.051 (1.30)

0.237 (6.02)

CL of Actuating Button

–50A

0.483 (12.268)

0.066 (1.676) 0.125 (3.175)

Actuation Length

Actuator Specifications Maximum Operating Force (gms.) Actuator Switch Type Type E61 E62 E63 E64

–00A

90

212

90

335

–00R

30

65

30

110

–50R

10

22

10

40

–00H

27

56

27

100

–50H

9

20

9

35

–00K

30

65

30

110

–50K

10

33

10

40

Maximum Pre-Travel inches (mm)

0.030 (0.76) 0.130 (3.30) 0.379 (9.63) 0.144 (3.66) 0.416 (10.57) 0.131 (3.33) 0.379 (9.63)

Operating Point* inches (mm)

0.330±0.015 (8.38±0.38) 0.574±0.054 (14.58±1.37) 0.570±0.156 (14.48±3.96) 0.350±0.030 (8.89±0.76) 0.350±0.175 (8.89±4.45) 0.570±0.030 (14.48±0.76) 0.570±0.158 (14.48±4.01)

Minimum Max. Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm)

0.040 (1.06) 0.030 (0.76) 0.050 (1.27) 0.040 (1.02) 0.050 (1.27) 0.030 (0.76) 0.040 (1.02)

0.004 (0.10) 0.020 (0.51) 0.050 (1.27) 0.020 (0.51) 0.050 (1.27) 0.020 (0.51) 0.050 (1.27)

— — 0.196 (4.98) 0.322 (8.18) 0.271 (6.88) 0.396 (10.06) 0.203 (5.16) 0.326 (8.28)

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance of ±0.031 inches (0.79mm).

Circuitry

Ordering Information

Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02.

Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. See additional note under terminals.

Example: E61-01A is normally open, and E61-02A is normally closed.

Note: 0.093″ (2.36mm) Quick Connect terminals are standard. To order solder terminals add 10 to suffix. To order 0.110″ (2.79mm) QC terminals add 30 to suffix. For PCB terminals consult factory.

Mounting Recommended mounting screw: #2-56 round head. Recommended torque on screw: 2 inch lbs. max.

Specifications subject to change without notice.

Reference Line

High Ratio Standard Ratio

Terminals Subminiature series is available with quick connect. 0.093″ (2.36mm) wide (mates with AMP Part No. 60432-1) and 0.110″ (2.794mm) wide (mates with AMP Part No. 42068-1). Also available in short solder terminal 0.143″ (3.63mm) wide x 0.125″ (3.18mm) long, and PCB terminal 0.051″ (1.30mm) wide x 0.191″ (4.85mm) long. Terminal

SPDT

SPST NO

SPST NC

0.093″ QC Short Solder† 0.110″ QC Barrel† PCB†

E61-00A E61-10A E61-30A E61-40A E61-50A

E61-01A E61-11A E61-31A E61-41A E61-51A

E61-02A E61-12A E61-32A E61-42A E61-52A



Example: To order the E61-50R with 0.110″ (2.79mm) QC terminals, order an E61-80R.

Not available on E64 Series.

Example: The basic E61-00A becomes E61-30A for 0.110″ (2.79mm) QC terminals. For PCB terminals consult factory for part numbers.

19

Dimensions — Modules

PCB Footprint — Modules

inches (mm)

Dimension A

C

0.087 (2.21) 0.095 (2.41) 0.483 (12.27) N.O.

COM

0.093 (2.36)

0.020 (0.51) (3 places)

0.063 (1.60) Ø (3)

Reference Line

NC

0.197 (5.00) — PCB Terminals Lateral to Case or Cover 0.237 (6.02) — PCB Terminals Straight Down Only

N.C.

0.094 (2.39) 0.109 (2.77) 0.103 (2.62) 0.405 (10.29) 0.375 + - 0.005 (9.53 + - 0.13) 0.781 (19.84)

0.087 (2.21) Dia 0.095 (2.41) Hole 0.250 (6.35)

Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown.

0.093 (2.36)

Terminals 0.250 (6.35)

QC

Short Solder 0.125 (3.18)

A Dimension 0.470±0.020 (11.934±0.51) 0.672±0.020 (17.07±0.51) 0.875±0.020 (22.23±0.51) 1.086±0.020 (27.58±0.51)

Actuators — Modules

0.237 (6.02) 0.200 (5.08)

QC

2 PDT 3 PDT 4 PDT 5 PDT

NO 0.405 (10.29)

0.050 (1.27)

0.058 (1.47)

PCB

0.344 (8.74)

0.093 (2.36)

0.143 (3.63)

0.110 (2.80)

–00A

–10A*

–30A

0.160 (4.06)

0.191 (4.85)

0.051 (1.30)

–50A*

0.133 (3.378) Standard Actuator Width

*Not available on E64 Series

CL of Actuating Button 0.483 (12.268)

Terminals — Modules Subminiature modules are available with quick connect. 0.093″ (2.362mm) wide (mates with AMP Part No. 60432-1) and 0.110″ (2.794mm) wide (mates with AMP Part No. 42068-1). Also available in short solder terminal 0.143″ (3.632mm) wide x 0.125″ (3.175mm) long, and PCB terminal 0.051″ (1.295mm) wide x 0.191″ (4.851mm) long.

High Ratio Standard Ratio

Ordering Information — Modules Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type and terminals you require. *For additional actuator styles consult factory.

Switch Type

Standard Ratio

High Ratio

20

Terminal 0.093″ (2.362mm) QC Solder 0.110″ (2.794mm) QC PCB 0.093″ (2.362mm) QC Solder 0.110″ (2.794mm) QC PCB

Specifications subject to change without notice.

2PDT –02HM –12HM –32HM –52HM –62HM –82HM

Part Number Suffix 3PDT 4PDT –03HM –04HM –13HM –14HM –33HM –34HM Consult Factory –53HM –54HM –63HM –64HM –83HM –84HM Consult Factory

5PDT –05HM –15HM –35HM –55HM –65HM –85HM

0.066 (1.676) 0.125 (3.175)

Actuation Length

Reference Line

®

SUBMINIATURE — SEALED

DC Series Features ●

Thermoplastic actuating button

Enclosed switch complying with IP 6K7



Silicon-free version available



Models available for operating temperatures up to 120°C



Rated for currents up to 10 amp at 250VAC



Range of auxiliary actuators available (can also be retrofitted)



Various contact materials available, depending on application



Mechanical life: min. 1 x106 operations



Wide variety of connection options

Thermoplastic case and cover

Silicon gasket

Stainless steel spring

Silver-nickel or gold crosspoint contacts

NC terminal NO terminal

Common terminal

Electrical Ratings Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

DC1 DC2 DC3 DC4

6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V~ 3A, 250V~

5A, 125/250VAC 10.1A, 125/250VAC; 1/4HP, 125VAC 0.1A, 125/250VAC 3A, 125/250VAC

10,000 10,000 50,000 50,000

6,000 6,000 6,000 6,000

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C /+120°C (without wire leads) -40° to +85C / +105°C (with wire leads) UL94V-O (PET, PBT) UL94HB (POM)

Materials

Case: Actuator: Auxiliary Actuator: Terminals: Contacts:

PET / PBT POM (T85), PBT (T120) Stainless Steel or Plastic Silver-Plated Copper-Zinc Silver Alloy (DC3 — Gold Crosspoint)

PBT = Polybutyleneterephthalate • PET = Polyethyleneterephthalate • POM = Polyacetal

21

Auxiliary Actuators inches (mm)

»L« ±0.03 (±0.8)

ø0.19 (ø4.8)

»L« ±0.03 (±0.8)

Plastic Simulated Roller

»L« ±0.03 (±0.8)

»L« ±0.03 (±0.8)

»L« ±0.03 (±0.8)

ø5

≥0.22 (≥5.6)

0.14 (3.5)

R2

Plastic Roller 0.11 (2.9)

Plastic Straight (85°C Rated)

0.14 (3.5)

≥0.22 (≥5.5)

0.14 (3.5)

R 0.10 (2.5)

0.14 (3.3)

Roller

Operating Point Rest Position

0.14 (3.5)

Straight (120°C Rated) »L« ±0.03 (±0.8)

Actuator Specifications Maximum Operating Force (cN) Actuator Code

Switch Type

DC1, DC3, DC4

DC2

AA

200

340

LB

80

150

LC

70

120

SB

90

160

SC

80

130

Maximum Pre-Travel inches (mm) DC1, DC3, DC4

0.04 (1.0) 0.18 (4.5) 0.20 (5.0)

0.18 (4.5) 0.20 (5.0)

DC2

DC1, DC3, DC4

DC2

Minimum Over-Travel inches (mm)

0.04 (1.0) 0.20 (5.0) 0.22 (5.5)

0.33±0.01 (8.4±0.3) 0.42±0.05 (10.7±1.3) 0.44±0.06 (11.1±1.5)

0.33±0.01 (8.4±0.3) 0.42±0.06 (10.7±1.6) 0.44±0.07 (11.1±1.8)

0.02 (0.6) 0.06 (1.5) 0.06 (1.5)

0.20 (5.0) 0.22 (5.5)

0.63±0.05 (16.0±1.3) 0.65±0.06 (16.4±1.5)

LD

Max. Movement Differential inches (mm)

Max. Rest Position inches (mm)

Actuation Length inches (mm)

0.004 0.004 (0.10) (0.10) 0.02 0.03 (0.5) (0.7) 0.02 0.04 (0.6) (1.0)

0.37 (9.3) 0.55 (14.0) 0.59 (15.0)

0.02 (0.5) 0.02 (0.6)

0.03 (0.7) 0.04 (1.0)

0.75 (19.0) 0.79 (20.0)

0.02 (0.5) 0.02 (0.6)

0.03 (0.7) 0.04 (1.0)

0.75 (19.0) 0.79 (20.0)

0.02 (0.6) 0.03 (0.8) 0.02 (0.6) 0.02 (0.6)

0.02 (0.6) 0.03 (0.8) 0.02 (0.6) 0.02 (0.6)

0.59 (15.0) 0.67 (17.0) 0.59 (15.0) 0.75 (19.0)

— — 0.189 (4.8) 0.276 (7.0) 1.654 (42.0) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.276 (7.0) 0.551 (14.0) 0.220 (5.6) 0.205 (5.2)

DC1, DC3, DC4

DC2

forces and travel available upon request

SD

0.63±0.06 (16.0±1.6) 0.65±0.07 (16.4±1.8)

0.06 (1.5) 0.06 (1.5)

forces and travel available upon request

RB

90

160

RC

80

130

WB

68

115

WC

50

85

VB

73

125

ZB

73

125

0.18 (4.5) 0.20 (5.0)

0.20 (5.0) 0.22 (5.5)

0.62±0.05 (15.8±1.3) 0.64±0.06 (16.2±1.5)

0.18 (4.5) 0.24 (6.0) 0.18 (4.5) .018 (4.5)

0.18 (4.5) 0.24 (6.0) 0.18 (4.5) 0.18 (4.5)

0.44±0.06 (11.1±1.5) 0.48±0.07 (12.2±1.8) 0.47±0.06 (11.9±1.4) 0.63±0.06 (16.0±1.4)

RD

22

Operating Point inches (mm)

0.62±0.06 (15.8±1.6) 0.64±0.07 (16.2±1.8)

0.06 (1.5) 0.06 (1.5)

forces and travel available upon request

Specifications subject to change without notice.

0.44±0.06 (11.1±1.5) 0.48±0.07 (12.2±1.8) 0.47±0.06 (11.9±1.4) 0.63±0.06 (16.0±1.4)

0.08 (2.0) 0.12 (3.0) 0.08 (2.0) 0.06 (1.5)

®

Terminal Options inches (mm)

Dimensions inches (mm)

QC 0.11 x 0.02 (2.8 x 0.5) Max. 30° Twisted ø0.09 (ø2.2)

0.26 (6.65)

PCB 0.05 x 0.02 (1.3 x 0.5) Max. 30° Twisted

0.11 (2.73) 0.30 (7.5)

PCB 0.02 x 0.02 (0.6 x 0.5) Max. 30° Twisted

0.26 (6.6)

0.09 (2.35)

0.09 (2.25)

0.24 (6.05)

0.27 (6.9)

0.10 (2.54)

ø0.07 (ø1.8)

ø0.05 (ø1.3)

0.24 (6.2)

0.30 (7.5)

0.19 (4.85)

Solder Short Max. 30° Twisted

0.29 (7.3)

0.30 (7.7) max.

max. 0.79 (20)

0.13 (3.2)

Rest Position Operating Point

0.26 (6.5)

PCB 0.02 x 0.02 (0.6 x 0.5) RH Side w/o Location Pins

0.30 (7.5)

PCB 0.02 x 0.02 (0.6 x 0.5) RH Side with Location Pins

0.20 (5.16)

0.12 (3.0)

Model with Connecting Leads

0.14 (3.5)

0.27 (6.75)

0.27 (6.75)

Top Down View of Lateral Termianls

Rest Position

0.3 (7.7) max.

0.26 (6.65)

Type A

PCB 0.02 x 0.02 (0.6 x 0.5) LH Side with Location Pins

0.27 (6.75)

0.14 (3.5)

Drilling Pattern for PCB Terminals with Location Pins 0.05 x 0.02 (0.6 x 0.5)

min. 19.69 (500)

max. 0.78 (20)

0.30 (7.5)

0.20 (5.08)

(

0.14 (3.5)

0.20 (5.16)

0.38 (9.53)

ø0.06 (1.6) 0.30 (7.5)

Type B

0.10 (2.54) min. 19.69 (500)

Right

0.20 (5.08)

COM Lead (Black)

Left

Cut-out

0.34 (8.6) max.

0.27 (6.9)

NC Lead (Grey)

Special Model Available with Tail Pedestal on Request

PCB 0.02 x 0.02 (.06 x 0.5) LH Side w/o Location Pins

0.09 (2.25)

0.24 (6.05)

NO Lead (Blue)

0.30 (7.5)

ø0.08 (ø2.15) ø0.05 (ø1.3) 0.30 (7.5)

0.12 (3.0)

0.27 (6.75)

Drilling Pattern for Lateral/Underside PCB Terminals w/o Location Pins 0.05 x 0.02 (0.6 x 0.5) 0.11 (2.73) Max. 30° Twisted 0.30 (7.5)

0.38 (9.53)

0.14 (3.5)

Drilling Pattern for PCB Terminals 0.05 x 0.02 (1.3 x 0.5)

Operating Point 0.19 (4.85) ø0.09 (ø2.2)

0.20 (5.08)

0.20 (5.08)

0.38 (9.53)

0.30 (7.5)

ø0.05 (1.3) 0.30 (7.5)

0.30 (7.5)

Ordering Information DC

3

G B

Series/Prefix Code UL Rating 1 5A,125/250VAC 2 10.1A, 125/250VAC 1/4HP, 125VAC 3 0.1A, 125/250VAC 4 4 3A, 250VAC

EN 61058 Rating 6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V~ 3A, 250V~

Contact Configuration +85°C Operating Temp +105°/120°C Operating Temp Code Code E SPST NO A SPST NO F SPST NC B SPST NC G SPDT C SPDT Notes: Wire leads 500mm min. (approximately 20″ long) 1. Only available with terminal configuration 1. 2. +85°C rated only. 3. Only available with DC1, DC3 and DC4. 4. Rating code 4 only as lead-version — leads 0.5mm2. 5. Wire versions only rated to +105°C. 6. Only available with terminal configuration 3 or 4.

3 L

Code A B C H K L N P Q S T U D E M 7. 8. 9. 10. 11.

Terminal Type inches (mm) Notes Short Solder 1 0.022 (0.52) Leads (No UL) 5, 9 0.032 (0.752) Leads (No UL) 5 0.05 x 0.02 (1.3 x 0.5) PCB 1 0.02 x 0.02 (0.6 x 0.5) PCB 1, 7 0.11 x 0.02 (2.8 x 0.5) QC 1 Without Leads (Type B) 6 Without Leads (Type A) 6 Without Leads (No Cut-Out) 8 Welding 1 Leads, 20 AWG 3, 11 Leads, 22AWG 9, 11 Only Available in North America Leads 18 AWG (UL Only) 5, 8, 10 Leads 16 AWG (UL Only) 5 Leads 20 AWG (UL Only) 3, 5

Code AA L R S V2 W2 Z2

Only available with terminal configuration 1, 6, 7, 8 or 9. Only available with terminal configuration 5. Only available with DC3 and DC4. Not available with DC2. Not available in North America.

C Actuator Type Button only Lever Roller Simulated Roller Plastic Sim. Roller Plastic Straight Plastic with Roller

Code 1 3 4 5 6 7 8 9

Code A — — — — — — —

Actuation Length inches (mm) B C D — — — 0.189 (4.8) 0.276 (7.0) 1.654 (42.0) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.220 (5.6) — — 0.276 (7.0) 0.551 (14.0) — 0.205 (5.2) — —

Terminal Configuration 30° Twisted Leads on Actuator Side Leads on Opposite Side from Actuator Leads Attached to Underside PCB Terminals Right-hand Side PCB Terminals Left-hand Side PCB Terminals Right-hand Side with Location Pins PCB Terminals Left-hand Side with Location Pins

Specifications subject to change without notice.

23

SUBMINIATURE — SEALED

DK Series Features ●

Enclosed switch complying with IP 6K5. IP 6K7 available on request



Very small dimensions, 0.579″ x 0.213″ x 0.268″ (14.7mm x 5.4mm x 6.8mm)



Models available for operating temperatures up to 105°C



Rated for 5mA@12VDC or 2A@12VDC



POM actuating button Gold-plated beryllium copper moving blade Stainless steel spring PBT + ASA cover

Can be actuated vertically or by auxiliary actuator



Gold crosspoint contacts for high contact stability



Mechanical life: min. 500,000 operations



Wide variety of connection options, also available with leads

Stainless steel internal actuator

Gold crosspoint contacts

PBT base Silver-plated copper-zinc terminals

Common terminal NO terminal NC terminal

Specifications Electrical

Temperature Rating: Flammability Rating:

-40°C to +85°C N/A

Materials

Base: Cover: Actuator: Auxiliary Actuator: Internal Actuator: Spring: Moving Blade: Terminals: Contacts: Gasket:

PBT PBT + ASA POM (+85°C) Stainless Steel Stainless Steel Stainless Steel Gold-Plated Beryllium Copper Silver-Plated Copper-Zinc Gold Crosspoint Silicon

ASA = Acrylonitrile-styrene-acrylicester • PBT = Polybutyleneterephthalate • POM = Polyacetal

®

Dimensions inches (mm)

Auxiliary Actuators inches (mm)

Rest Position max 0.146 (3.7) Operating Point 0.120 ±0.008 (3.05 ±0.20) End Position 0.063 ±0.024 (1.6 ±0.6)

Rest Position max 0.146 (3.7) Operating Point 0.120 ±0.008 (3.05 ±0.20)

0.146 (3.7)

0.134 (3.40)

0.024 (0.6)

Simulated Roller

max 0.476 (12.0)

0.213 (5.4) 0.197 (5.0)

L1

End Position 0.063 ±0.024 (1.6 ±0.6)

Rest Position Operating Point L1

0.102 (2.6)

0.375 (9.53) 0.478 (12.13)

0.134 (3.40)

»L«

NC Lead (Grey) NO Lead (Blue)

ø0.087 (ø2.2)

Straight Rest Position Operating Point

(IP6K7 Complaint)

0.268 (6.8)

0.480 (12.2)

0.146 (3.7)

0.024 (0.6)

0.579 (14.7)

DK Sub-subminiature Switch with Leads

COM Lead (Black)

Terminal Options inches (mm) PCB Terminals — Straight 0.098 (2.5)

0.024 x 0.020 (0.6 x 0.5)

0.024 x 0.020 (0.6 x 0.5)

0.024 x 0.020 (0.6 x 0.5)

0.197 (5.0)

0.200 (5.08)

0.197 (5.0) 0.230 (5.85)

0.024 (0.6)

0.200 (5.08)

0.112 (2.85)

0.112 (2.85)

Solder Terminals

Drilling Patterns for PCB Terminals

0.098 x 0.020 (2.5 x 0.5)

(Side and Underside) 0.024 x 0.020 (0.6 x 0.5)

0.067 (1.7) 0.127 (3.22)

PCB Terminals LH Side with Location Pins

0.230 (5.85)

0.089 (2.27)

PCB Terminals RH Side with Location Pins

Ø0.051 +0.004 (Ø1.30 +0.10)

Top-down View of Lateral Terminals

Left

Right

0.098 (2.5)

0.163 (4.13)

0.163 (4.13)

0.200 0.200 (5.08) (5.08)

Ordering Information DK

1

G TR

Series/Prefix Code Current Rating 1 0.005A@12VDC or 2A@12VDC

Code Contact Configuration G SPDT Version with Leads E SPST NO F SPST NC

Specifications subject to change without notice.

Code RN RR RL SN SR SL TR UL W3 W9 W6 Z3 Z9 Z6

A0 Terminal Type inches (mm) 0.098 x 0.020 (2.5 x 0.5) Solder, Straight w/o Pins 0.098 x 0.020 (2.5 x 0.5) Solder, Straight with RH Pins 0.098 x 0.020 (2.5 x 0.5) Solder, Straight with LH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight w/o Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight with RH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, Straight with LH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, RH Side with RH Pins 0.024 x 0.020 (0.6 x 0.5) PCB, LH Side with LH Pins 9.843 (250) Leads 0.0142 (0.352) to Underside w/o Pins 9.843 (250) Leads 0.0142 (0.352) to Underside with RH Pins 9.843 (250) Leads 0.0142 (0.352) to Underside with LH Pins 19.685 (500) Leads 0.0142 (0.352) to Underside w/o Pins 19.685 (500) Leads 0.0142 (0.352) to Underside with RH Pins 19.685 (500) Leads 0.0142 (0.352) to Underside with LH Pins

Code A0 D1 E1

Actuator Type Without Auxiliary Actuator Straight Spring-Loaded Auxiliary Actuator Simulated Roller, Spring-Loaded

25

SUBMINIATURE — SEALED

DCJK Series Features ●

Enclosed switch complying with IP 6K7



Silicon-free version available



Models available for operating temperatures up to 120°C



Rated for currents up to 10 amp at 250VAC



Range of auxiliary actuators available (can also be retrofitted); two mounting positions



Wide variety of terminal types; 3 pedestal heights



High contact stability thanks to selection of application-specific contact materials



Mechanical life: min. 2 x 106 operations

Thermoplastic actuating button Thermoplastic case and cover

Silicon gasket

Stainless steel spring

Silver-nickel or gold crosspoint contacts NC terminal NO terminal

Common terminal

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C /+120°C (without wire leads) -40° to +85C / +105°C (with wire leads) UL94V-O (PET) UL94V-2 (PA) UL94HB (POM)

Materials

Base: Cover: Actuator: Auxiliary Actuator: Terminals: Contacts:

PET PET/PA POM (85°C) / PA (120°C) Stainless Steel or Plastic Silver-Plated Copper-Zinc Silver Alloy; Silver; Gold-Plated Silver Crosspoint; Gold Crosspoint

PA = Polyamide • PET = Polyethyleneterephthalate • POM = Polyacetal

®

Dimensions inches (mm)

Auxiliary Actuators

Rest Position Operating Point max. 0.303 (7.7)

max. 0.787 (20.0)

ø0.087 (ø2.2)

max. 0.362 (9.2)

0.295 (7.5)

Switches in the DCJK family have two mountings for attaching auxiliary actuators. This, combined with the range of actuators available in the DC switch family and various operating points, means that a wide variety of operating forces and travel combinations is feasible. To find the perfect fit for your requirements, please contact us.

0.089 (2.25)

0.107 (2.73)

0.375 (9.53)

Rest Position Operating Point

max. 0.326 (9.2)

0.203 (5.16)

Dimensions inches (mm)

Rest Position Operating Point

max. 0.374 (9.5)

COM Lead (Black)

0.100 (2.54) max. 0.375 (9.53)

Rest Position Operating Point

0.203 (5.16)

max. 0.382 (9.7)

Model with Electrical Leads 0.205 (5.2) from base to drill hole

max. 0.303 (7.7)

max. 0.787 min. »L« (20.0) Leads attached on side opposite actuator max. 0.205 (5.2)

min. »L« Leads attached on actuator side

max. 0.303 (7.7)

NC Lead (Grey)

0.343±0.012 (8.7±0.3)

max.0.319 (8.1)

NO Lead (Blue)

8.089 (2.25)

Model with Electrical Leads 0.319 (8.1) from base to drill hole

max. 0.303 (7.7)

0.295 (7.5)

For customizing to individual requirements, switches in the DCJK family are available with four different switching points.

max. 0.098 (2.5)

0.295 (7.5)

0.251 (6.4)

0.331±0.012 (8.4±0.3)

0.100 (2.54)

0.350±0.012 (8.9±0.3)

0.331±0.012 (8.4±0.3) 0.272 (6.9)

Switching Point Options inches (mm)

Rest Position Operating Point

max. 0.323 (8.2)

0.370±0.012 (9.4±0.3)

Because of the huge variety of options available, there is no fully descriptive order code. Please give us details of your requirements so that we can find the right solution to suit your needs and tell you the precise order code to use.

max. 0.406 (10.3)

Example

Ordering Information DCJK Series/Prefix

1 Code 1 2 3 5

2 Contact Material Silver Alloy Silver Gold Crosspoint Gold-Plated Silver Crosspoint

Specifications subject to change without notice.

Code 1 2 3

xx Pedestal Height Short Pedestal 0.098 (2.5) Medium Pedestal 0.205 (5.2) Tall Pedestal 0.319 (8.1)

Serial Number

27

SUBMINIATURE — SEALED

DJSeries Features ●

Enclosed switch complying with IP 6K7



Suitable for actuation at angles of up to 40°, depending on material used in sliding actuator, etc.



Multiple location pins and locating slots make installation easy



Very small dimensions



Models available for operating temperatures up to 85°C



Rated for 5mA@12VDC or 2A@12VDC



High contact stability due to gold crosspoint contacts



Mechanical life: min. 500,000 operations



Wide variety of connection options

Gold crosspoint contacts

Gold-plated beryllium copper moving blade

POM actuating button

Stainless steel spring

Stainless steel internal actuator

PBT + ASA cover

PBT base

Silver-plated terminals

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C N/A

Materials

Base: Cover: Actuator: Internal Actuator: Spring: Gasket: Moving Blade: Terminals: Contacts:

PBT PBT + ASA POM Stainless Steel Stainless Steel Silicon Gold-Plated Beryllium Copper Silver-Plated Copper-Zinc Gold Crosspoint

ASA = Acrylonitrile-styrene-acrylicester • PBT = Polybutyleneterephthalate • POM = Polyacetal

®

Dimensions inches (mm)

Rest Position max. 0.161 (4.1)

0.598 (15.2)

0.252 (6.4)

0.480 (12.2)

0.138 (3.5)

0.197 (5.0)

0.028 (0.7)

0.321 (8.15)

0.157 (4.0)

0.134 (3.4)

0.028 (0.7)

0.061 (1.55)

Operating Point 0.136±0.008 (3.45±0.20)

0.028 (0.7)

0.102 (2.6)

ø0.087 (ø2.2)

0.028 (0.7)

0.375 (9.53) 0.478 (12.13)

Terminal Options inches (mm) Solder Terminals

PCB Terminals

0.098 x 0.020 (2.5 x 0.5)

0.028 x 0.020 (0.7 x 0.5)

Drilling Pattern for PCB Terminals

Top-down View of Lateral Location Pins

0.139 (3.53)

0.115 (2.93)

0.028 x 0.020 (0.7 x 0.5)

Ø0.051 +0.004 (Ø1.30 +0.10)

Left 0.098 (2.5)

0.127 (3.22)

0.089 (2.27)

0.028 (0.7)

Right

0.200 0.200 (5.08) (5.08)

0.200 (5.08)

0.163 (4.13)

0.200 (5.08)

0.163 (4.13)

Ordering Information DJ

1

Series/Prefix

G

BR AO

Code Contact Configuration G SPDT

Code Current Rating 1 0.005A@12VDC or 2A@12VDC

Specifications subject to change without notice.

Code AN AL AR BN BL BR

Code Actuator Type AO Without Auxiliary Actuator

Terminal Type inches (mm) 0.098 x 0.020 (2.5 x 0.5) Solder, Straight w/o Pins 0.098 x 0.020 (2.5 x 0.5) Solder, Straight with LH Pins 0.098 x 0.020 (2.5 x 0.5) Solder, Straight with RH Pins 0.028 x 0.020 (0.7 x 0.5) PCB, Straight w/o Pins 0.028 x 0.020 (0.7 x 0.5) PCB, Straight with LH Pins 0.028 x 0.020 (0.7 x 0.5) PCB, Straight with RH Pins

29

SUBMINIATURE — SEALED

E72/E73 Series Features Hi-temp thermoplastic button



Moisture resistant



3 contact arrangements



Long life coil spring mechanism



Choice of button or hinged actuator



10″, 16 gauge leads attached



Custom wire and harness designs available upon request

Water-resistant weatherproof hydrin boot

Hi-temp thermoplastic cover and base

Hi-temp polyethylene wire Common terminal NC terminal NO terminal

Electrical Ratings Switch Series

E72 E73

EN61058 Rating

N/A N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

10.1A, 1/4HP, 125/250VAC 0.1A, 125VAC

N/A N/A

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C UL94V-O

Materials

Case: Boot: Button: Actuator: Potting: Contacts:

Hi-Temp Thermoplastic Nylon Hydrin Hi-Temp Thermoplastic Nylon Stainless Steel Macromelt Polyamide Silver Alloy (E72), Gold Crosspoint (E73)

6,000 6,000

®

Dimensions inches (mm)

Dimension to C/L of roller 0.650±0.031 (16.51±0.79) 0.032 (0.813) 0.212 (5.38)

15°

0.890 (22.61)

0.918 (23.32) Ref.

0.915 (23.24)

Reference Line

0.385 (9.78) 0.625 + - 0.005 (15.88 + - 0.13) 15°

0.032 (0.813)

0.858 + - 0.031 (21.79 + - 0.79)

0.230 (5.84)

0.110 (2.79)

0.180 (4.57) Ref 0.110 (2.79)

Slotted Dimensions 0.142/0.144 (3.61/3.66)

0.212 (5.38)

0.142/0.146 (3.61/3.71) Dia

Hinge Screw Case

0.748 (19.00)

0.170/0.175 (4.32/4.45)

Screw Case

Characteristics inches (mm) Max. Rest Position Max. Pre-travel Operating Point Min. Over-travel Max. Movement Differential Max. Operating Force

- 40AT

- 40HT

- 40KT

0.390 (9.91) 0.040 (1.02) 0.310 – 0.350 (7.87 – 8.99) 0.035 (0.89) 0.004 (0.10) 300 gms.

0.972 (24.69) 0.275 (6.99) 0.440 – 0.750 (11.18 – 19.05) 0.100 (2.54) 0.024 (0.61) 67 gms.

1.041 (26.44) 0.240 (6.10) 0.762 ± 0.125 (19.36± 3.18) 0.125 (3.18) 0.025 (0.635) 75 gms.

Mounting Recommended screw size: #6-32 round head. Recommended torque on screw: 6 inch lbs. max.

Specifications subject to change without notice.

Ordering Information Actuator

Silver Contacts

Gold Contacts

Button

E72-40AT

E73-40AT

Lever

E72-40HT

E73-40HT

Roller

E72-40KT

E73-40KT

31

MINIATURE

D4 Series Features ● ● ● ● ● ● ● ●



8 current ratings Choice of actuators Various terminal types 3 contact arrangements Choice of standard or light operating force Long-life coil spring mechanism Agency approved extended life versions ENEC/VDE approval standard on European versions Stackable case and cover available upon request

Flame-retardant, UL94V-O self-extinguishing case and cover

Long-life stainless steel spring mechanism

ARC-resistant case has internal barriers 4mm minimum between live parts and external hardware

NC terminal

NO terminal

European Approved Versions D4 series switches with metric mounting holes automatically carry ENEC approval. D4 series switches with U.S. mounting holes have optional VDE approval. Contact factory for part number. Switches with straight terminals may require insulated connectors for international approval.

Reinforced mounting holes totally contained in case to provide maximum distance to mounting hardware. Choice of U.S. (#4 screw) or metric (3mm screw)

Single or double throw, either normally open or normally closed

Common terminal

Offset terminals maintain adequate spacing when quick connects are used.

Electrical Ratings Switch Series

D40 D41 D42 D43 D44 D45 D48 D49

Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations)

EN61058 Rating

UL1054 Rating

N/A 0.1(0.05)A, 250V~ 3(1)A, 250V~ 6(2)A, 250V~ 10(3)A, 250V~ 16(4)A, 250V~ 10(3)A, 400V~ (Std. force only) 21(8)A, 250V~ N/A

1.0A, 125VAC 0.1A, 125/250VAC 3A, 125/250VAC; 1/10HP, 250VAC 5A, 1/4HP, 125/250VAC 10A, 1/2HP, 125/250VAC 15A, 1/2HP, 125/250VAC

NA 50,000 50,000 50,000 50,000 50,000

6,000* 6,000* 6,000* 6,000* 6,000* 6,000*

21A, 1HP, 125VAC; 2HP, 250VAC 10A, 1/2HP, 125/250VAC; 6A, 30VDC

10,000 NA

6,000* 6,000**

Operating life for 125°C and 150°C available upon request.

*Indicates 100K life available. Consult factory.

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C, 125°C or 150°C UL94V-O

Materials

Case: Actuating Button: Auxiliary Actuator: Common Terminal: NO/NC Terminals:

Moving Blade: Contacts:

Thermoplastic Polyester (PBT), European Versions (PET) Thermoplastic Acetal (POM), 85°C Thermoplastic Polyester (PET), 125°C or 150°C Aluminum, Stainless Steel or Cold-Rolled Steel (Nickel-Plated) Silver-Plated Brass Brass (D40, D41, D42, D43, D44, D49) Brass (D45, European versions) Copper (D45, US Versions) Silver-Plated Copper (D48, US versions) Copper (D48, European versions) Brass (D40, D41, D42, D43) Beryllium Copper (D44, D45, D48) Gold Crosspoint (D40, D41) Silver Alloy (D42, D43, D44, D45, D48, D49)

®

Dimensions European Version (mm)

U.S. Version (inches) 0.050 – 0.187 x 0.020 Terminals 0.055 – 0.187 x 0.032 Terminals

1.095 + - 0.015 0.070 Dia Hole

0.109

0.125

10.31 + 0.38 4.1 -

0.406 + - 0.015

0.250 0.187 0.250

0.174

13.1

0.797 + - 0.010

2.8

0.113 + - 0.116 Dia. Hole 0.195

0.625 0.406

N.C. N.O.

COM

OP RP

0.397

3.1 + - 0.15

10.3

16.2 max. 14.7±0.5

27.8 22.2 20.25

3.1±0.15

0.113 + - 0.116

2.8

3.3 + - 0.15

0.126 + 0.002 0.549

Reference Line

0.875 + - 0.005

Terminals

0.106 0.181 Optional Standard

Actuators

V1

V3

PA

Q1

Q3

PB

R1

R3

P5

Y5

Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. Actuation Length

*Plug Housing

P4

C1

C3

Z5

B8

Standard Ratio

S1

High Ratio 0.177 (4.50)

Switch Mounting Hole 0.355 (9.0)

W9

Roller

*Connector Part #623-0518 (mates with Y5 only).

EN (VDE) Identifiers Switches with a “standard” operating force are identified by a ‘Y’ next to the standard model description, e.g. D43Y.

Drilling Patterns for PCB Terminals

P4

0.07 (1.8) 0.79 (20.0)

0.17 (4.3)

0.17 (4.4) 0.22 (5.6)

PA

0.17 (4.4) 0.22 (5.6)

Switches with a “light” operating force are identified by an ‘X’ next to the standard model description, e.g. D43X.

Mounting — US Version 0.77 (19.5) 0.30 (7.65)

0.31 (7.8)

PB

0.06 (1.6)

0.2 (5.0)

Recommended mounting screw size: #4-40 Round head. Recommended torque on screw: 3 inch lbs. max.

P5

Mounting — European Version 0.22 (5.6) 0.22 (5.65) 0.07 (1.8) 0.79 (20.0)

0.17 (4.3)

0.23 (5.75)

Recommended mounting screw size: M3. Recommended torque on screw: 70N cm max.

0.07 (1.8)

0.31 (7.8)

Specifications subject to change without notice.

33

Actuator Specifications — US Versions Maximum Operating Force (Gms.) Actuator Type

Switch Type

Maximum Pre-Travel inches (mm)

D40, D41, D42

D43

D44

D45

D48

D49

Std / Light

Std / Light

Std / Light

Std / Light

Std / Light

Std / Light

AA

75 / 15

170 / 45

285 / 75 400 / 100

— / 120

285 / 75

LA

75 / 15

170 / 45

285 / 75 400 / 100

— / 183

285 / 75

LD*†

35 / 8

86 / 23

144 / 37

200 / 51

— / 77

144 / 37

MD*††

20 / 5

51/ 14

86 / 23

120 / 30

— / 46

86 / 30

JL*†††

17 / 3.5

38 / 10

63 / 17

90 / 22

— / 36

63 / 17

RA

75 / 15

170 / 45

285 / 75 400 / 100

—/—

285 / 75

RD

35 / 8

86 / 22

144 / 37

200 / 50

—/—

144 / 37

TD

25 / 5

51 / 14

86 / 22

120 / 30

—/—

86 / 22

GD

35 / 8

86 / 33

144 / 47

200 / 50

—/—

144 / 37

Operating Point inches (mm)

D40-D45, D49 D48

0.047 0.070 (1.19) (1.78) 0.062 0.063 (1.57) (1.60) 0.125 0.150 (3.18) (3.80) 0.222 0.252 (5.59) (6.40) 0.300 0.347 (7.62) (8.80) 0.047 — (1.19) 0.125 — (3.18) 0.200 — (5.08) 0.125 — (3.18)

D40-D45, D49

Minimum Over Travel inches (mm) D48

0.558/0.598 0.537/0.557 (14.17/15.19) (13.64/14.15) 0.580/0.620 0.578/0.618 (14.73/15.75) (14.70/15.70) 0.555/0.645 0.563/0.657 (14.10/16.38) (14.0/16.4) 0.525/0.675 0.535/0.661 (13.34/17.15) (13.6/16.8) 0.500/0.700 0.472/0.724 (12.70/17.78) (12.0/18.4) 0.776/0.836 — (19.71/21.33) 0.761/0.851 — (19.33/21.62) 0.731/0.881 — (18.57/22.38) 1.000/1.090 — (25.40/27.69)

D40-D45, D49

0.050 (1.27) 0.050 (1.27) 0.085 (2.16) 0.130 (3.30) 0.187 (4.75) 0.040 (1.02) 0.085 (2.16) 0.120 (3.05) 0.085 (2.16)

Max. Movement Actuation Differential Length inches (mm) inches (mm) D40-D45, D49

D48

0.040 (1.02) 0.031 (0.80) 0.071 (1.80) 0.126 (3.20) 0.169 (4.30) — — — —

0.010 (0.25) 0.016 (0.41) 0.030 (0.76) 0.050 (1.27) 0.065 (1.65) 0.010 (0.25) 0.030 (0.76) 0.040 (1.02) 0.030 (0.76)

D48

0.010 (0.25) 0.011 (0.30) 0.031 (0.80) 0.051 (1.30) 0.067 (1.70) — — — —

— 0.865 (21.97) 1.40 (35.56) 1.580 (40.13) 2.757 (70.03) 0.810 (20.57) 1.240 (34.04) 1.512 (38.51) 1.340 (34.04)

*Auxiliary levers on light force D40, D41 and D42 will be made out of Aluminum. †YD

suffix for D40, D41 and D42.

††XD

suffix for D40, D41 and D42.

†††YL

suffix for D40, D41 and D42.

Ordering Information — US Versions D4

3

3 Mounting Holes

Series/Prefix Code 0 1 2

EN61058 N/A 0.1(0.5)A, 250V 3(1)A, 250V

3 4 5

8

6(2)A, 250V 10(3)A, 250V 16(4)A, 250V 10(3)A, 400V~ (Std. force only) 21(8)A, 250V

9

N/A

UL1054 1.0A, 125VAC 0.1A, 125/250VAC 3A, 125/250VAC 1/10HP, 250VAC 5A, 1/4HP, 125/250VAC 10A, 1/2HP, 125/250VAC 15A, 1/2HP, 125/250VAC

21A, 1HP, 125VAC 2HP, 250VAC 10A, 1/2HP, 125/250VAC 6A, 30VDC

VDE optional for D41–D44 with U.S. mounting holes.

34

Specifications subject to change without notice.

US Mounting Holes (VDE Optional)

V3

Oper. Temp. NO NC DT Force Index A J D

B K E

C L F

Std. Light Std.

W

X

Y

Light

85°C 150°C*

*D45 and D48 with VDE only available with metric holes. See European ordering information.

Code Q1 Q3 R1 V1 V3

Terminal Type inches (mm) 0.187 x 0.032 (4.8 x 0.8) QC Straight* 0.187 x 0.032 (4.8 x 0.8) QC Dog Leg* 0.187 x 0.020 (4.8 x 0.8) QC, Straight* 0.250 x 0.032 (6.3 x 0.8) QC, Straight 0.250 x 0.032 (6.3 x 0.8) QC, Dog Leg

*Not available for D48.

L Code AA L M Y X J K R T G N

D Actuator Type Button Lever SR Lever HR Alum. Lever SR Alum. Lever HR SS Lever SR SS Lever HR Roller SR Roller HR 1-Way Roller SR 1-Way Roller HR

Code A — 0.865 (21.97) 1.042 (26.47) — — — — 0.810 (20.57) 0.987 (25.07) 0.810 (20.57) 0.987 (25.07)

Actuation Length inches (mm) D L — — 1.400 (35.56) 2.757 (70.02) 1.580 (40.13) 2.934 (74.52) 1.400 (35.56) 2.757 (70.03) 1.580 (40.13) 2.932 (74.47) — 2.757 (70.03) — 2.932 (74.47) 1.340 (34.04) — 1.516 (38.51) — 1.340 (34.04) — 1.516 (38.51) —

SR = Standard Ratio, Back Hole • HR = High Ratio, Front Hole Additional actuators available upon request.

®

Actuator Specifications — European Versions Maximum Operating Force (Gms.) Actuator Type

Switch Type

D40, D41, D42

D43

D44

D45

Std / Light

Std / Light

Std / Light

Std / Light

AA

75 / 15

170 / 45

285 / 75 400 / 100

150

MA/KA

50 / 10

110 / 28

180 / 50

256 / 65

100

LA/JA*

85 / 17

190 / 50

320 / 85

440 / 115

180

JD/LD*

40 / 8

86 / 22

144 / 40

200 / 50

75

KD/MD*

25 / 5

50 / 14

86 / 25

120 / 30

45

LL/JL*

17 / 3.5

40 / 10

60 / 17

90 / 22

35

ML/KL*

10 / 2

25 / 6

40 / 10

56 / 13

20

Maximum Pre-Travel inches (mm)

D48

RA

90 / 15 190 / 45

330 / 75 440 / 100 180

RD

40 / 8

86 / 22

144 / 40

200 / 50

75

TD

25 / 14

55 / 14

86 / 22

120 / 30

50

TA

55 / 10 110 / 30

200 / 55

260 / 70

110

UA

55 / 11 120 / 32

215 / 55

280 / 70

110

SA

85 / 17 190 / 50

330 / 85 440 / 115 200

Operating Point inches (mm)

Minimum Over Travel inches (mm)

Max. Movement Differential inches (mm)

D41–D45

D48

D41–D45, D48

D41–D45

D48

D41–D45

D48

0.047 (1.2) 0.087 (2.2) 0.047 (1.2) 0.126 (3.2) 0.200 (5.1) 0.299 (7.6) 0.500 (12.7) 0.047 (1.2) 0.126 (3.2) 0.200 (5.1) 0.087 (2.2) 0.087 (2.2) 0.051 (1.3)

0.063 (1.6) 0.118 (3.0) 0.063 (1.6) 0.150 (3.8) 0.252 (6.4) 0.346 (8.8) 0.575 (14.6) 0.067 (1.7) 0.150 (3.8) 0.244 (6.2) 0.118 (3.0) 0.118 (3.0) 0.067 (1.7)

0.543/0.598 (13.8/15.2) 0.567/0.630 (14.4/16.0) 0.579/0.618 (14.7/15.7) 0.551/0.646 (14.0/16.4) 0.535/0.661 (13.6/16.8) 0.465/0.724 (11.8/18.4) 0.433/0.764 (11.0/19.4) 0.776/0.839 (19.7/21.3) 0.764/0.850 (19.4/21.6) 0.744/0.870 (18.9/22.1) 0.764/0.850 (19.4/21.6) 0.768/0.846 (19.5/21.5) 0.780/0.835 (19.8/21.2)

0.051 (1.3) 0.063 (1.6) 0.035 (0.9) 0.091 (2.3) 0.142 (3.6) 0.185 (4.7) 0.031 (7.9) 0.039 (1.0) 0.087 (2.2) 0.142 (3.6) 0.063 (1.6) 0.063 (1.6) 0.039 (1.0)

0.047 (1.2) 0.055 (1.4) 0.031 (0.8) 0.071 (1.8) 0.126 (3.2) 0.169 (4.3) 0.283 (7.2) 0.031 (0.8) 0.071 (1.8) 0.118 (3.0) 0.051 (1.3) 0.051 (1.3) 0.031 (0.8)

0.012 (0.3) 0.024 (0.6) 0.012 (0.3) 0.031 (0.8) 0.051 (1.3) 0.067 (1.7) 0.098 (2.5) 0.016 (0.4) 0.031 (0.8) 0.051 (1.3) 0.024 (0.6) 0.020 (0.5) 0.012 (0.3)

0.012 (0.3) 0.024 (0.6) 0.012 (0.3) 0.031 (0.8) 0.051 (1.3) 0.067 (1.7) 0.098 (2.5) 0.012 (0.3) 0.031 (0.8) 0.047 (1.2) 0.024 (0.6) 0.020 (0.5) 0.012 (0.3)

Max. Rest Position inches (mm)

Actuation Length inches (mm)

D41–D45 D48

D41–D45, D48

0.638 (16.2) 0.740 (18.8) 0.661 (16.8) 0.780 (19.8) 0.874 (22.2) 0.992 (25.2) 1.210 (30.8) 0.858 (21.8) 0.976 (24.8) 1.080 (27.4) 0.937 (23.8) 0.937 (23.8) 0.858 (21.8)

0.638 (16.2) 0.740 (18.8) 0.661 (16.8) 0.780 (19.8) 0.874 (22.2) 0.992 (25.2) 1.210 (30.8) 0.866 (22.0) 0.976 (24.8) 1.078 (27.4) 0.945 (24.0) 0.945 (24.0) 0.866 (22.0)

— 1.01 (25.7) 0.835 (21.2) 1.40 (35.6) 1.58 (40.1) 2.75 (69.9) 2.93 (74.4) 0.811 (20.6) 1.34 (34.1) 1.52 (38.6) 0.988 (25.1) 0.988 (25.1) 0.811 (20.6)

*On light force D41 and D42, auxiliary actuators MD, ML, LD and LL are made out of Aluminum.

Ordering Information — European Versions D4

3

3 Mounting Holes

Series/Prefix Code 1 2 3 4 5

EN61058 0.1(0.5)A, 250V 3(1)A, 250V

8

6(2)A, 250V 10(3)A, 250V 16(4)A, 250V 10(3)A, 400V~ (Std. force only) 21(8)A, 250V

9

N/A

UL1054 0.1A, 125/250VAC 3A, 125/250VAC 1/10HP, 250VAC 5A, 1/4HP, 125/250VAC 10A, 1/2HP, 125/250VAC 15A, 1/2HP, 125/250VAC

21A, 1HP, 125VAC 2HP, 250VAC 10A, 1/2HP, 125/250VAC 6A, 30VDC

EN standard on all D4 European designs.

European Metric Mounting Holes (EN Standard)

V3

Oper. Temp. NO NC DT Force Index 1 2 3 Std. 85°C 7 G N

8 H P

9 M R

Light Std. Light

125°C

S

T

U

Light

150°C

L Code AA J K L M R S T U

D Actuator Type Button SS Lever SR SSLever HR Lever SR Lever HR Roller SR Sim. Roller SR Roller HR Sim. Roller HR

Code A — 0.835 (21.2) 1.01 (25.7) 0.835 (21.2) 1.01 (25.7) 0.811 (20.6) 0.811 (20.6) 0.988 (25.1) 0.988 (25.1)

Actuation Length inches (mm) D L — — 1.4 (35.6) 2.75 (69.9) — 2.93 (74.4) 1.4 (35.6) 2.75 (69.9) — 2.93 (74.4) 1.34 (34.1) — — — 1.52 (38.6) — — —

SR = Standard Ratio, Back Hole • HR = High Ratio, Front Hole Additional actuators available upon request.

Code A1 B8 C1 C3 P4 P5 PA PB Q1 Q3 R1 R3 S1 V1 V3 W9 Y5 Z5

Terminal Type inches (mm) Welding Short Solder* 0.110 x 0.032 (2.8 x 0.8) QC, Bifurcated Straight** 0.110 x 0.032 (2.8 x 0.8) QC, Bifurcated Dog Leg** 0.047 x 0.020 (1.2 x 0.5) PCB, Underside* 0.047 x 0.020 (1.2 x 0.5) PCB, Rear* 0.047 x 0.032 (1.2 x 0.8) PCB, Housing Side* 0.047 x 0.032 (1.2 x 0.8) PCB, Cover Side* 0.187 x 0.032 (4.8 x 0.8) QC Straight* 0.187 x 0.032 (4.8 x 0.8) QC Dog Leg* 0.187 x 0.020 (4.8 x 0.8) QC, Straight** 0.187 x 0.020 (4.8 x 0.5) QC, Dog Leg** Solder with Temp. Stop 0.250 x 0.032 (6.3 x 0.8) QC, Straight 0.250 x 0.032 (6.3 x 0.8) QC, Dog Leg Screw* 0.250 x 0.032 (6.3 x 0.8) QC, 5mm Grid 0.250 x 0.032 (6.3 x 0.8) QC, 7mm Grid

* Not available for D48 European versions. ** Not available for D45 or D48 versions. Specifications subject to change without notice.

35

MINIATURE

D3 Series Features ●

Self-cleaning effect of wiping contact mechanism provides excellent reliability



Suitable for low actuation speeds



Highly flexible, due to two mounting positions and a variety of auxiliary actuators



Wide variety of terminal types



>3mm (0.12″) contact gap available

POM actuating button

PET cover and base

NO terminal

Stainless steel spring NC terminal

Silver contacts Common terminal

Electrical Ratings Switch Series

D36 – Std. D37 – Std. D38 – Std. D36 – Light D37 – Light D38 – Light

Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations)

EN61058 Rating

UL1054 Rating

4(2.5)A, 250V~ 10(3)A, 250V~ 16(4)A, 250V~ 10(3)A, 400V~ 4(1)A, 250V~ 10(2)A, 250V~ 16(2.5)A, 250V~ 10(1.5)A, 400V~

4A, 250VAC 10A, 1/2HP, 125/250VAC 16A, 125/250VAC, 1HP

50,000 50,000 50,000

6,000 6,000 6,000

4A, 250VAC 10A, 1/2HP, 125/250VAC 16A, 125/250VAC, 1HP

50,000 50,000 50,000

6,000 6,000 6,000

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C UL94V-O

Materials

Case: Actuator: Auxiliary Actuator: Terminals: Contacts:

PET POM Stainless Steel; Nickel-Plated Steel Copper-Zinc Silver Cadmium Oxide

PET = Polyethyleneterephthalate • POM = Polyacetal

®

Auxiliary Actuators

Dimensions inches (mm) Terminals

Actuation Length

QC 0.25 x 0.031 (6.3 x 0.8)

0.



QC



0.189 x 0.031 (4.8 x 0.8)

Q3

0.445 (11.3)

Roller

Solder

NO

Straight

20

(5

)

0.11 (2.8)

0.42 (10.55)

V3

0.13 (3.2)

Standard Ratio (SR) 0.35 (9.0)

0.52 (13.3)

0.134 (3.2)

0.52 (13.1) 0.41 (10.3)

max 0.63 (16)

1.09 (27.8) 0.87 (22.2) 0.80 (20.25) 0.13 (3.2)

NC

High Ratio (HR) 0.53 (13.5)

0.260 (6.60)

S8

NO

Ø0.09 (Ø2.2)

NC

NO

Welding

0.11 (2.8)

0.13 (3.4) Reference Line

0.260 (6.6)

A8

0.264 (6.7)

Simulated Roller

NC

0.250 (6.3) 0.264 (6.7)

Screw

0.16 (4)

0.41 (10.3)

0.250 (6.3) 0.51 (13.0)

W9 25° 30°

Actuator Specifications Maximum Operating Force (cN) Actuator Type

Switch Type

D36 Std.

D37 Std.

D38 Std.

D36 Light

D37 Light

D38 Light

AA

170

260

400

60

130

200

MA/KA

120

170

265

40

85

130

MD/KD

50

80

120

18

40

60

ML/KL

22

35

50

10

18

25

LA/JA

180

280

425

65

140

210

LD/JD

80

130

200

30

65

100

LL/JL

35

55

80

15

28

40

Maximum Pre-Travel inches (mm)

Operating Point* inches (mm)

0.059 (1.5) 0.106 (2.7) 0.232 (5.9) 0.528 (13.4) 0.063 (1.6) 0.138 (3.5) 0.311 (7.9)

0.559/0.598 (14.2/15.2) 0.567/0.630 (14.4/16.0) 0.528/0.669 (13.4/17.0) 0.433/0.764 (11.0/19.4) 0.579/0.618 (14.7/15.7) 0.551/0.646 (14.0/16.4) 0.488/0.709 (12.4/18.0)

Minimum Max. Movement Max. Rest Over-Travel Differential Position inches inches inches (mm) (mm) (mm)

0.047 (1.2) 0.067 (1.7) 0.146 (3.7) 0.335 (8.5) 0.039 (1.0) 0.083 (2.1) 0.193 (4.9)

0.012 (0.3) 0.024 (0.6) 0.051 (1.3) 0.118 (3.0) 0.016 (0.4) 0.031 (0.8) 0.071 (1.8)

Actuation Length** inches (mm)

0.63 (16.0) 0.71 (18.0) 0.85 (21.6) 1.19 (30.1) 0.66 (16.8) 0.75 (19.1) 0.97 (24.6)

— — 1.012 (25.7) 1.579 (40.1) 2.929 (74.4) 0.835 (21.2) 1.402 (35.6) 2.752 (69.9)

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.8mm).

Ordering Information D3

7

Series/Prefix Code 6 7 8

6 7 8

Current Rating Standard Force 4A, 250VAC (UL, CSA) 4(2.5)A, 250V~ (ENEC) 10A, 1/2HP, 125/250VAC (UL, CSA); 10(3)A, 250V~ (ENEC) 16A, 125/250VAC, 1HP (UL, CSA) 16(4)A, 250V~; 10(3)A, 400V~ (ENEC) Light Force 4A, 250VAC (UL, CSA) 4(1)A, 250V~ (ENEC) 10A, 1/2HP, 125/250VAC (UL, CSA) 10(2)A, 250V~ (ENEC) 16A. 125/250VAC, 1HP (UL, CSA) 16(2.5)A, 250V~; 10(1.5)A, 400V~ (ENEC)

3



Q3 L

Code Contact Configuration Standard Operating Force 1 SPST NO 2 SPST NC 3 SPDT Light Operating Force 7 SPST NO 8 SPST NC 9 SPDT

Code V3 Q3 S8 W9 A8

Code AA J K L M R S T U

D Actuator Type Button Straight, Stainless, SR Straight, Stainless, HR Straight, SR Straight, HR Roller, SR Simulated Roller, SR Roller, HR Simulated Roller, HR

Code A — 0.835 (21.2) 1.012 (25.7) 0.835 (21.2) 1.012 (25.7) 0.811 (20.6) 0.811 (20.6) 0.988 (25.1) 0.988 (25.1)

Actuation Length inches (mm) D L — — 1.402 (35.6) 2.752 (69.9) 1.579 (40.1) 2.929 (74.4) 1.402 (35.6) 2.752 (69.9) 1.579 (40.1) 2.929 (74.4) 1.343 (34.1) — — — 1.520 (38.6) — — —

Terminal Type inches (mm) 0.25 x 0.031 (6.3 x 0.8) QC 0.189 x 0.031 (4.8 x 0.8) QC Solder with Temp. Stop Screw Welding

Note: PCB terminals available upon request.

Specifications subject to change without notice.

37

Contact Gap >3mm (0.12 inch) Electrical Ratings

Terminal Options Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations)

EN61058 Rating

UL1054 Rating

D36

4(3)A, 250V~

D37 D3B

10(4)A, 250V~ 8(8)A, 250V~

4A, 250VAC, 1/3HP 125/250VAC 10A, 1/2HP, 125/250VAC 10A, 1/2HP, 125/250VAC

50,000

10,000

50,000 50,000

6,000 10,000

QC 0.25 x 0.03 (6.3 x 0.8) V1

Actuator Specifications Maximum Operating Force (cN)

Maximum Pre-Travel inches (mm)

Operating Point* inches (mm)

AA

500

MA/KA

320

0.075 (1.9) 0.134 (3.4)

0.567±0.020 (14.4±0.5) 0.579±0.031 (14.7±0.8)

Actuator Code

Switch Type

TA

Minimum Max. Movement Max. Rest Over-Travel Differential Position inches inches inches (mm) (mm) (mm)

0.028 (0.7) 0.035 (0.9)

0.047 (1.2) 0.079 (2.0)

0.63 (16.0) 0.71 (18.0)

forces and travel available upon request

UA

forces and travel available upon request

MD/KD

150

0.295 (7.5)

TD

0.563±0.075 (14.3±1.9)

0.075 (1.9)

0.177 (4.5)

0.86 (21.8)

forces and travel available upon request

KL

65

LA/JA

550

0.669 (17.0) 0.075 (1.9)

RA

0.512±0.165 (13.0±4.2) 0.587±0.020 (14.9±0.5)

0.165 (4.2) 0.024 (0.6)

0.409 (10.4) 0.047 (1.2)

1.21 (30.8) 0.66 (16.8)

forces and travel available upon request

SA

forces and travel available upon request

LD/JD

240

0.177 (4.5)

RD

0.575±0.047 (14.6±1.2)

0.047 (1.2)

0.102 (2.6)

0.76 (19.2)

forces and travel available upon request

JL

100

0.425 (10.8)

0.39 (10.0)

0.13 (3.4)

Switch Series

0.520±0.110 (13.2±2.8)

0.126 (3.2)

0.256 (6.5)

0.098 (25.0)

0.44 (11. 3)

QC 0.25 x 0.03 (6.3 x 0.8) Dog Leg

Actuation Length inches (mm)

— — 1.012 (25.7) 0.988 (25.1) 0.988 (25.1) 1.579 (40.1) 1.520 (38.6) 2.929 (74.4) 0.835 (21.2) 0.811 (20.6) 0.811 (20.6) 1.402 (35.6) 1.343 (34.1) 2.752 (69.9)

0.52 (13.3)

V3

5° 8°

QC 0.19 x 0.03 (4.8 x 0.8) Straight Q1

QC 0.19 x 0.03 (4.8 x 0.8) Dog Leg Q3 )

QC 0.11 x 0.03 (2.8 x 0.8) Bifurcated, Straight C1

QC 0.11 x 0.03 (2.8 x 0.8) Bifurcated, Dog Leg C3

Ordering Information D3

7

Series/Prefix

4 Code 4 5 6

Q3 Contact Configuration SPST NO SPST NC (D3B only) SPDT (D3B only)

LD Actuator Code See table above

Solder 0.26 (6.6)

S8

.2)

.09

( ø2

Code 6 7 B

UL Rating 4A,1/3HP, 125/250VAC 10A, 1/2HP, 125/250VAC 10A, 1/2HP, 125/250VAC

EN 61058 Rating 4(3)A, 250V~ 10(4)A, 250V~ 8(8)A, 250V~

Code V1 V3 Q1 Q3 C1 C3 S8 W9 A8

Terminal Type inches (mm) 0.25 x 0.03 (6.3 x 0.8) QC, Straight 0.25 x 0.03 (6.3 x 0.8) QC, Dog Leg 0.19 x 0.03 (4.8 x 0.8) QC, Straight 0.19 x 0.03 (4.8 x 0.8) QC, Dog Leg 0.11 x 0.03 (2.8 x 0.8) QC, Bifurcated Straight* 0.11 x 0.03 (2.8 x 0.8) QC, Bifurcated Dog Leg* Solder with Temp. Stop Screw (D3B only) Welding

38

Specifications subject to change without notice.

0.51 (13)

Screw W9 25° 30°

Welding A8

0.26 (6.6) .3) 5 (6 0.2

0.26 (6.7)

Note: PCB terminals available upon request. *D36 only.

0.26 (6.7)

ø0

®

MINIATURE

E Series Features ●

Thermoplastic actuating button

8 current ratings AC Stainless steel spring



3 current ratings DC



Choice of actuator styles



Choice of terminals



3 contact arrangements



Long-life coil spring mechanism



Agency approved extended life versions



High-temperature versions available

Phenolic case

NC terminal

NO terminal Silver alloy or gold crosspoint contacts Common terminal

Electrical Ratings Switch Series

EN61058 Rating

E21 E22

N/A N/A

E23 E31 E33 E34 E35 E36

N/A N/A N/A N/A N/A N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

0.1A, 125VAC (0.25A, 30VDC optional) 3A, 125/250VAC 1/10HP, 250VAC (0.1A, 125VDC optional) 5A, 1/4HP, 125/250VAC 1A, 125VAC 10A, 1/2HP, 125/250VAC (6A, 30VDC optional) 15A, 1/2HP, 125/250VAC 20.1A, 1/2HP, 125/250VAC 25A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC

N/A N/A

6,000* 6,000

N/A N/A N/A N/A N/A N/A

6,000* 6,000* 6,000* 6,000* 6,000 6,000

*Indicates 100K life available.

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C (130°C and 150°C optional, except E36) UL94HB

Materials

Case: Actuating Button: Common Terminals: NO & NC Terminals: Moving Blade: Spring: Auxiliary Actuator: Roller: Contacts:

General Purpose Phenolic Thermoplastic Acetal Silver-Plated Brass (E21, E22, E23, E31, E33, E34, E35) Silver-Plated Copper (E36) Brass (E21, E22, E23, E31, E33, E34, E35) Copper (E36) Brass (E21, E22, E23) Silver-Plated Beryllium Copper (E31, E33, E34, E35, E36) Stainless Steel Cold-Rolled Steel (Nickel-Plated) (except E21 and E22 — Aluminum) Sintered Stainless Steel Silver Alloy (except E21 and E31 — Gold Crosspoint)

(E34 and E35 only)

39

Dimensions — Standard Force

inches (mm)

Part Number Suffix –50N 0.020 (0.51) Thk x 0.187 (4.75) Wide Q.C. Terminal

Actuation Line

0.125 (3.16)

0.406 + - 0.015 (10.31 + - 0.38)

0.797 + - 0.010 (20.24 + - 0.25)

N.C.

0.234 (5.94)

0.580 + - 0.045 (14.73 + - 1.14) Operating Position

0.110 (2.79)

0.087 (2.21)

N.O.

COM

0.099 (2.51) Dia. Hole

Short Solder 0.234 (5.94)

1.289 + - 0.031 (32.74 + - 0.79)

0.106 (2.69)

0.240 (6.10)

Reference Line

0.397 + - 0.015 + 0.035 + 0.020 (10.08 - 0.38) (0.89 + - 0.51) 0.109 (2.77)

0.110 (2.79) 0.875 (22.23) 1.093 + - 0.015 (27.76 + - 0.38)

0.960 (24.38) Max. Rest

0.250 (6.35)

Max. Operating Force (gms.) Maximum Pre-Travel Switch E21, E23, inches Type E22 E31 E33 E34 (mm)

–00A

75

170

285

400

–00H

75

170

285

400

–50H

35

86

144

200

–50HL

20

51

86

120

–00K

75

170

285

400

–50K

35

86

144

200

–50KL

25

51

86

120

–50P

35

86

144

200

–50N†

35

86

144

200

–90N

35

86

144

200

0.047 (1.19) 0.062 (1.57) 0.125 (3.18) 0.220 (5.59) 0.047 (1.19) 0.125 (3.18) 0.200 (5.08) 0.125 (3.18) 0.175 (4.45) 0.125 (3.18)

Operating Point* inches (mm)

0.578±0.020 (14.68±0.51) 0.600±0.020 (15.24±0.51) 0.600±0.045 (15.24±1.14) 0.600±0.075 (15.24±1.91) 0.806±0.030 (20.47±0.76) 0.806±0.045 (20.47±1.14) 0.806±0.075 (20.47±1.91) 1.045±0.045 (26.54±1.14) 0.600±0.045 (15.24±1.14) 0.793±0.058 (20.14±1.47)

Terminals — Standard Force Minimum Max. Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm)

0.050 (1.27) 0.050 (1.27) 0.085 (2.16) 0.130 (3.30) 0.040 (1.02) 0.085 (2.16) 0.120 (3.05) 0.085 (2.16) 0.065 (1.65) 0.085 (2.16)

0.010 (0.25) 0.016 (0.41) 0.030 (0.76) 0.040 (1.02) 0.010 (0.25) 0.030 (0.76) 0.040 (1.02) 0.030 (0.76) 0.030 (0.76) 0.030 (0.76)

— — 0.865 (21.97) 1.400 (35.56) 1.580 (40.13) 0.810 (20.57) 1.340 (34.04) 1.516 (38.51) 1.340 (34.04) 1.382 (35.10) 1.289 (32.74)

Mounting — Standard Force

Circuitry — Standard Force

Recommended mounting screw size: #4-40 round head. Recommended torque on screw: 3 inch lbs. max.

Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02.

Ordering Information Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. Specifications subject to change without notice.

0.187 (4.75)

COM

0.786 + - 0.045 (19.96 + - 1.14) Operating Position

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ± 0.031 inches (0.79mm). † Only available with 85°C temperature rating. Note: E35 and E36 not available in standard force. See Miniature E Series Light Force for ordering information. Suffix numbers shown represent switch with 0.187″ (4.75mm) terminals.

40

0.234 (5.94)

N.C. N.O.

N.C. N.O.

Actuator Specifications — Standard Force



N.C. N.O.

0.234 (5.94)

Q.C.

0.110 (2.79) x 0.120 (3.05) 0.122 (3.10) 0.132 (3.35)

Actuator Type

N.C. N.O.

Part Number Suffix –90N

COM

0.465 (11.81)

Solder

N.C. N.O.

Actuation Line 0.625 + - 0.015 0.406 (15.88 + - 0.38) (10.31)

0.234 (5.94)

0.750 (19.05) Max. Rest

0.050 (1.27) Dia.

0.110 (2.79) Dia. 0.122 (3.10)

Screw

N.C. N.O.

0.250 (6.35)

0.250 (6.35)

Terminals

1.382 + - 0.031 (35.10 + - 0.79)

Choice of screw, solder or two quick connect terminals. Note: 0.187″ Quick Connect terminals are standard. Normally, to order screw terminals add 10 to suffix number. To order solder terminals add 20 to suffix number and to order 0.250″ Q.C. terminals add 40 to suffix number. Terminal

SPDT

SPST NO

SPST NC

QC 0.187″ Screw Solder Short Solder QC 0.250″

–00A –10A –20A –30A –40A

–01A –11A –21A –31A –41A

–02A –12A –22A –32A –42A

Actuators — Standard Force Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown.

Actuation Length

High Ratio 0.177 (4.50)

Standard Ratio Switch Mounting Hole 0.355 (9.02)

®

Dimensions — Light Force inches (mm) Part Number Suffix –50NX 0.020 (0.51) Thk x 0.187 (4.75) Wide Q.C. Terminal

Actuation Line

0.125 (3.16)

0.406 + - 0.015 (10.31 + - 0.38)

0.250 (6.35)

0.050 (1.27) Dia.

0.250 (6.35) 0.797 + - 0.010 (20.24 + - 0.25)

0.113 (2.87) Dia. 0.116 (2.95)

0.109 (2.77)

Terminals

1.382 + - 0.031 (35.10 + - 0.79)

Screw 0.234 (5.94) N.C. N.O.

0.750 (19.05) Max. Rest

Solder

N.C.

0.234 (5.94) N.O.

0.580 + - 0.045 (14.73 + - 1.14) Operating Position

N.C. N.O.

COM

0.099 (2.51) Dia. Hole

Short Solder

Part Number Suffix –90NX 0.625 + - 0.015 0.406 (15.88 + - 0.38) (10.31)

N.C.

0.087 (2.21)

N.O.

0.234 (5.94)

Actuation Line

0.234 (5.94)

1.289 + - 0.031 (32.74 + - 0.79)

N.C. N.O.

0.240 (6.10)

COM

Q.C. 0.106 (2.69)

0.112 (2.85) x 0.126 (3.20) 0.116 (2.95)

0.397 + - 0.015 (10.08 + - 0.38) 0.207 + - 0.015 (5.27 + 0.38) -

0.109 (2.77)

0.291 (7.39) 0.343 + - 0.015 (8.71 + - 0.38)

0.875 (22.23) 1.093 + - 0.015 (27.76 + - 0.38)

0.550 + - 0.015 (13.97 + - 0.38)

Reference Line

E21, E22

E23, E31

E33

E34

E35

Maximum Pre-Travel inches E36 (mm)

–00AX

15

45

75

100





–00HX

15

45

75

100





–50HX

8

22

37

50





–75HX

5

14

22

30





–50KX

8

22

37

50





–75KX

5

14

22

30





–55HX

4

10

17

22





–85HX

2

6

10

13



–50NX†

8

22

37

50

65 112

–90NX

8

22

37

50

65 112

–40AX









120 220



COM



0.047 (1.19) 0.062 (1.57) 0.125 (3.18) 0.220 (5.59) 0.125 (3.18) 0.200 (5.08) 0.300 (7.62) 0.500 (12.70) 0.175 (4.45) 0.125 (3.18) 0.070 (1.78)

Operating Point* inches (mm)

0.578±0.020 (14.68±0.51) 0.600±0.020 (15.24±0.51) 0.600±0.045 (15.24±1.14) 0.600±0.075 (15.24±1.91) 0.806±0.045 (20.47±1.14) 0.806±0.075 (20.47±1.91) 0.600±0.100 (15.24±2.54) 0.600±0.175 (15.24±4.45) 0.600±0.045 (15.24±1.14) 0.793±0.058 (20.14±1.47) 0.557±0.020 (14.15±0.51)

Maximum Minimum Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm)

0.050 (1.27) 0.050 (1.27) 0.085 (2.16) 0.130 (3.30) 0.085 (2.16) 0.120 (3.05) 0.187 (4.75) 0.312 (7.92) 0.065 (1.65) 0.085 (2.16) 0.035 (0.89)

0.010 (0.25) 0.016 (0.41) 0.030 (0.76) 0.040 (1.02) 0.030 (0.76) 0.040 (1.02) 0.065 (1.65) 0.100 (2.54) 0.303 (0.76) 0.030 (0.76) 0.010 (0.25)

— — 0.865 (21.97) 1.400 (35.56) 1.580 (40.13) 1.340 (34.04) 1.516 (38.51) 2.757 (70.03) 2.932 (74.47) 1.382 (35.10) 1.289 (32.74) — —

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm). † Only available with 85°C temperature rating. Note: Suffix numbers shown represent switch with 0.187″ (4.75mm) terminals.

Mounting — Light Force

Circuitry — Light Force

Recommended mounting screw size: #4-40 round head. Recommended torque on screw: 3 inch lbs. max.

Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02.

Ordering Information Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. Specifications subject to change without notice.

0.187 (4.75)

0.250 (6.35)

Max. Operating Force (gms.) Switch Type

0.234 (5.94)

N.C. N.O.

N.C. N.O.

0.786 + - 0.045 (19.96 + - 1.14) Operating Position

0.109 (2.77)

Actuator Specifications — Light Force Actuator Type

0.960 (24.38) Max. Rest

Terminals — Light Force Choice of screw, solder or two quick connect terminals. Note: 0.187″ Quick Connect terminals are standard. Normally, to order screw terminals add 10 to suffix number. To order solder terminals add 20 to suffix number and to order 0.250″ Q.C. terminals add 40 to suffix number. Exception: When ordering –55HX, –75HX, –75KX or –85HX switches with screw, solder or 0.250″ terminals, consult factory. Terminal

QC 0.187″ Screw Solder Short Solder QC 0.250″

SPDT

SPST NO

SPST NC

–00AX –10AX –20AX –30AX –40AX

–01AX –11AX –21AX –31AX –41AX

–02AX –12AX –22AX –32AX –42AX

*E35 and E36 only available with 0.250″ (6.35) terminals.

Actuators — Light Force Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. Actuation Length

High Ratio 0.177 (4.50)

Standard Ratio Switch Mounting Hole 0.355 (9.02)

41

MINIATURE LOW TORQUE

E Series Features ●

Long life coil spring mechanism



Low torque rotary actuation



Clockwise or counter clockwise actuation



6 terminal types



Double rivet sturdy case construction



3 contact arrangements

Phenolic case

Stainless steel spring

Silver or gold crosspoint contacts Brass moving blade

NC terminal

NO terminal

Common terminal

Electrical Ratings Switch Series

E51 E53

EN61058 Rating

N/A N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

6A, 250VAC 0.1A, 125VAC

N/A N/A

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C UL94HB

Materials

Case: Terminal: Moving Blade: Contacts: Spring:

General Purpose Phenolic Silver-Plated Brass Brass Silver Alloy (E51), Gold Crosspoint (E53) Stainless Steel

6,000 6,000

®

Dimensions inches (mm)

Actuators 0.139 (3.53)

1.218 (30.94)

0.750 (19.05)

0.123 (3.12) Dia Hole 0.126 (3.20)

0.937 (23.80) 0.709 (18.01)

Wireform actuators are supplied unassembled for each switch. Wireforms may be readily assembled to switch rotor as shown.

0.652 (16.56)

0.218 (5.54)

0.580 (14.73)

0.140 (3.56)

0.550 (13.97)

Mtg Surface Switch Rotor

0.483 (12.27)

COM

N.O.

0.265 (6.73)

N.C.

0.065 (1.65)

3.19 (81.03)

0.875 (22.23) Max

0.685 (17.40)

Wireform No. 0014-0645

0.343 (8.71)

Clockwise Actuation Shown

0.123 (3.12) x 0.158 0.126 (3.20) (4.01) Slot

0.293 (7.44)

0.388 (9.85)

0.328 (8.33)

Terminals Vertical Twist QC

Standard Parallel QC 0.032 (0.81)

0.406 (10.31)

0.020 (0.51)

Circuitry

0.406 (10.31)

0.187 (4.75)

0.205 (5.21) 0.062 x 0.100 Slot (1.58 x 2.54)

0.062 x 0.100 Slot (1.58 x 2.54)

0.205 (5.21)

0.187 0.062 x 0.100 Slot (1.58 x 2.54) (4.75)

0.032 (0.81)

0.020 (0.51)

Vertical Straight QC 0.406 (10.31)

0.312 (7.93) Max

For example, E51-00B is double throw, E51-01B is normally open and E51-02B is normally closed.

0.187 (4.75) 0.032 (7.67)

0.205 (5.21)

0.093 (2.36) Dia. Hole

0.062 x 0.100 Slot (1.58 x 2.54)

This series is available in single pole double throw and single pole single throw either normally open or normally closed. In general, normally open may be specified by adding 01 to suffix numbers, and normally closed by adding 02.

0.020 (0.51)

Mounting Recommended mounting screw size: #4-40 Round head. Recommended torque on screw: 4 inch lbs. max.

Rest Pos.



Reset Range on Return Stroke

Reset Range on Return Stroke



26° ± 3° 5°

15°

13°

Operating Characteristics



21°

13°

Datum Line

Datum Line

15° 21° COM

38° min. Total Stroke

N.O.

SW. OP. Range on OP. Stroke

N.C.

OP. Range on OP. Stroke

Counterclockwise Actuation

38° min. Total Stroke

Clockwise Actuation

Standard Force

4.0″ gms. (max.)

Overtravel

15° min. (10.5 gram – cm)

Movement Differential

3° min.

Note: Special models and tooling capability available for custom wire form actuators. Note: Additional operating forces available upon request. Consult factory.

Rest from Centerline 26° ± 3°. Full Overtravel 38° minimum.

Ordering Information Actuator Specifications Switch Type

Actuator Type

Direction of Actuator

Terminals inches (mm)

–00B

Clockwise

Standard Parallel 0.205 (5.21)

–00R

Clockwise

Standard Parallel 0.187 (4.75)

–00E

Counter Clockwise

Standard Parallel 0.205 (5.21)

–00T

Counter Clockwise

Standard Parallel 0.187 (4.75)

–50B

Clockwise

Vertical Twist 0.205 (5.21)

–50R

Clockwise

Vertical Twist 0.187 (4.75)

–50E

Counter Clockwise

Vertical Twist 0.205 (5.21)

–50T

Counter Clockwise

Vertical Twist 0.187 (4.75)

–60B

Clockwise

Vertical Straight 0.205 (5.21)

–60R

Clockwise

Vertical Straight 0.187 (4.75)

–60E

Counter Clockwise

Vertical Straight 0.205 (5.21)

–60T

Counter Clockwise

Vertical Straight 0.187 (4.75)

Specifications subject to change without notice.

Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require.

43

MINIATURE

KSeries Features ● ● ● ● ● ● ● ● ●

Choice of current ratings up to 25 amps Choice of actuators Choice of terminals 3 contact arrangements Choice of operating force Long mechanical life Wiping contact action Snap over actuators Agency approved extended life versions

Flame retardant, UL94V-O self-extinguishing case and cover

ARC-resistant case has internal barriers, 4mm minimum between live parts and external hardware

Long-life snap action switch mechanism

NC terminal NO terminal

International Approved Versions

Choice of U.S. (#4 screw) or metric (3mm screw)

K Series switches, except 25A (KWS), are internationally approved. Switches with straight terminals may require insulated connectors for international approval.

Single or double throw, either normally open or normally closed Common terminal

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

KWA/KWB KWC/KWD KWE/KWF KWG/KWH KWJ/KWK KWL

50mA, 28VDC 1(0.5)A, 250VAC 3(1)A, 250VAC 6(2)A, 250VAC 10(3)A, 250VAC N/A

KWM

16(4)A, 250VAC

KWS

N/A

50mA, 28VDC 1.0A, 125/250VAC 3A, 1/10HP, 125/250VAC 5A, 1/4HP, 125/250VAC 10A, 1/2HP, 125/250VAC 15.1A, 1/2HP, 125/250 VAC 5A, 125VAC Lamp Load (85°C only) 0.5A, 125VAC (85°C only) 0.25A, 250VAC (85°C only) 15.1A, 1/2HP, 125/250VAC 0.5A, 125VDC (85°C and 150°C only) 0.25A, 250VDC (85°C and 150°C only) 15.1A, 1/2HP, 125/250VAC (200°C only) 25A, 125/250VAC (85°C only) 1HP, 125VAC (85°C only) 2HP, 250VAC (85°C only)

50,000 50,000 50,000 50,000 50,000 N/A

100,000 100,000 100,000 100,000 100,000 100,000

50,000

100,000

N/A

100,000

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C, 150°C or 200°C UL94V-O

Materials

Case/Cover: Button:

Auxiliary Actuator: Terminals: Moving Blade: Contacts:

Thermoplastic Polyester (85°C or 150°C) Liquid Crystal Polymer (200°C) Thermoplastic Acetal (85°C) Thermoplastic Polyester (150°C) Liquid Crystal Polymer (200°C) Cold-Rolled Steel (Nickel-Plated) Brass Copper (25 amp only) Beryllium Copper Silver Alloy (except KWA and KWB — Gold-Plated)

®

Actuators

Dimensions inches (mm)

1.140 (28.96)

Standard type snap over hinged lever and roller actuators are available in choice of two pivot positions. Lengths are dimensioned from centerline of switch upper mounting hole as shown here.

0.174* (4.42) or 0.125 (3.18)

0.406 (10.31)

0.109 (2.77)

0.320 (8.13)

0.578 ± 0.015 (14.68 ± 0.38) Oper. Pos. 0.406 ± 0.005 (10.31 ± 0.13)

0.250* (6.35) or 0.187 (4.75)

Ø 0.070 (1.78) 0.057 (1.45)

0.570 (14.48) 0.119 (3.02) 0.156 (3.96)

0.797 (20.24) 0.532 (13.51)

0.109 (2.77)

0.047 (1.19) Max. Pretravel

Auxiliary Actuator

0.160 (4.06)

ØA ± 0.005 (± 0.13)

Actuation Length Straight

0.320 (8.13)

0.625 (15.88)

NC 0.112 (2.85)

Roller

NO COM ± 0.005 A (±0.13)

High Ratio

0.570 (14.48)

0.032 (0.81) or 0.020 (0.51)

Mounting Holes U.S.

Metric

A Dim. 0.114 (2.90) B Dim. 0.126 (3.20) Mtg Screw 4-40 (3)

Simulated Roller

0.360 (9.14)

0.875 ± 0.005 (22.23 ± 0.13)

Ø B ± 0.005 (± 0.13)

0.236 (5.99)

0.282 (7.16)

Ref. Line

0.532 (13.51)

0.368 (9.35)

0.122 (3.10) 0.134 (3.40)

Standard Ratio

Notes: SPDT switch (as shown) with 3 terminals NO, NC, and COM. SPST switch will have one terminal (NO or NC), and a COMMON terminal depending on switch type.

Mounting

*Applicable to 0.032 (0.8) thick by 0.250 (6.3) wide tabs only.

Recommended mounting screw size: #4-40 Round head. Recommended torque on screw: 3 inch lbs. max.

Dog Leg Terminal

Actuator Specifications Maximum Operating Force (gms.) Actuator Type

Switch Type

KWA, KWC, KWE

KWG

KWD, KWJ KWB, KWF

KWH, KWK, KWM

A

25

KWS

50

75

150

225

B

25

50

75

150

225

C

14

27

40

80

120

D

6

12

18

36

54

E

15

30

44

88

132

F

8

15

23

45

67

G

4

7

10

20

30

J

16

31

46

92

138

M

9

18

26

52

77

Q

15

29

43

85

127

T

8

16

24

47

71

Maximum Pre-Travel inches (mm)

Operating Point* inches (mm)

Minimum Over-Travel inches (mm)

Max. Movement Differential inches (mm)

Actuation Length** inches (mm)

0.047 (1.19) 0.064 (1.63) 0.128 (3.26) 0.284 (7.22) 0.116 (2.95) 0.230 (5.85) 0.512 (13.01) 0.110 (2.80) 0.200 (5.08) 0.120 (3.05) 0.218 (5.54)

0.563/0.593 (14.31/15.06) 0.621/0.585 (15.78/14.85) 0.637/0.569 (16.18/14.45) 0.679/0.527 (17.25/13.38) 0.634/0.572 (16.11/14.52) 0.665/0.541 (16.90/13.74) 0.739/0.467 (18.78/11.86) 0.758/0.698 (19.26/17.72) 0.781/0.675 (19.84/17.14) 0.852/0.786 (21.65/19.96) 0.877/0.761 (22.28/19.32)

0.050 (1.27) 0.051 (1.29) 0.085 (2.16) 0.182 (4.62) 0.074 (1.88) 0.146 (3.71) 0.407 (10.33) 0.088 (2.23) 0.115 (2.92) 0.096 (2.43) 0.173 (4.39)

0.010 (0.25) 0.012 (0.31) 0.030 (0.76) 0.051 (1.30) 0.021 (0.54) 0.041 (1.05) 0.091 (2.32) 0.020 (0.51) 0.036 (0.92) 0.022 (0.56) 0.039 (1.00)

— — 0.865 (21.97) 1.400 (35.56) 2.722 (69.14) 1.077 (27.36) 1.612 (40.94) 2.934 (74.52) 1.254 (31.85) 1.466 (37.24) 1.340 (34.04) 1.552 (39.42)

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).

Ordering Information K

A

Series/Prefix Light Standard Current Code Force Code Force Rating Notes A 25 B 75 50mA 1 C 25 D 75 1A 1 E 25 F 75 3A 1 G 50 H 150 5A 1 J 75 K 150 10A 1 L 150 15A 3 M 150 15A 2 S 225 25A 3, 5

D Code A B C D E

Q Temperature Rating 85°C UL/CUL 150°C UL/CUL 200°C UL/CUL 85°C UL/CUL/VDE 150°C UL/CUL/VDE

Notes: 1. CULUS rated for 100,000 cycles at 85°C, 150°C, 200°C. VDE rated for 150°C only.

Code P4 Q R S T V W

A C A Terminal Type inches (mm) 0.062 x 0.032 (1.57 x 0.81) PCB* 0.187 x 0.020 (4.75 x 0.51) Straight 0.187 x 0.020 (4.75 x 0.51) Dog Leg 0.187 x 0.032 (4.75 x 0.81) Straight 0.187 x 0.032 (4.75 x 0.81) Dog Leg 0.250 x 0.032 (6.35 x 0.81) Straight 0.250 x 0.032 (6.35 x 0.81) Dog Leg

*PCB terminals are lateral to case only.

2. CULUS rated for 100,000 cycles at 85°C, 150°C, 200°C. VDE rated for 85°C only. 3. CULUS rated for 100,000 cycles at 85°C only. 4. Available in 10A and lower, CULUS rated for 100,000 cycles at 85°C and 150°C. 5. Available with 0.250 x 0.032″ terminals only.

Code A B C D E F G J M Y† Q W† T

Code Mounting Holes A U.S. B Metric

Code A B C

Configuration Normally Open Normally Closed Double Throw

Snap Over Actuators Actuation Length

Type Button Straight SR Straight SR Straight SR Straight HR Straight HR Straight HR SIM Roller SR SIM Roller HR Roller SR Roller SR Roller HR Roller HR

inches (mm)

0.865 (21.97) 1.400 (35.56) 2.722 (69.14) 1.077 (27.36) 1.612 (40.95) 2.934 (74.52) 1.254 (31.85) 1.466 (37.24) 0.810 (20.57) 1.340 (34.04) 1.022 (25.96) 1.552 (39.42)



Specifications subject to change without notice.

Available as internal mounting only.

45

HEAVY-DUTY SNAP ACTION

GP Series Features ●

Ultra-small travel differential



Mechanical life tested to 1 million cycles



Current switching to 15 amps



Wide variety of actuators



Screw or solder terminals standard



Low operating forces available

Rugged phenolic case and cover

High-strength beryllium copper alloy spring

Gold over silver contacts for versatile, long-life switching

Insert molded terminal pins

Polished brass screws and lock washers (solder terminals optional)

Specifications Electrical

Ratings: Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

15A, 250VAC (UL) 15A, 250V (VDE) 1000VAC 50/60Hz for 1 minute 100M ohms min at 500VDC 15m ohms max -20° to +85°C

Materials

Case: Cover: Spring: Contacts: Terminals: Lever Actuator:

Phenolic Phenolic Beryllium Copper Alloy Silver Alloy Brass Screw Terminals; Copper Alloy Solder Terminals Stainless Steel

®

Mounting Holes

Terminal Types inches (mm)

U.S. Version

Solder Terminal

0.36 (9.14)

0.25 (6.4)

Screw Terminal

0.787 (20.0)

0.172 Diameter

0.787 (20.0)

0.002

0.140±0.001

Metric Version

N.O. COM.

N.C.

0.314 (8.0)

1.937 (49.2)

1.937 (49.2)

1.586 (40.3) 3.M2.6 x 0.45 TAP x4L

3.M4 x 0.7 TAP x 5.5L

0.10 4.4±0.00

Standard Part Numbers and Descriptions

Dimensions inches (mm)

PT

Maximum Operating Force (oz.)

Minimum Release Force (oz.)

Maximum Pre-Travel inches (mm)

Operating Point Min./Max. inches (mm)

GPSCNA01

12.3

4.0

0.016 (0.41)

0.610/0.642 (15.49/16.31)

0.005 (0.13)

0.002 (0.05)

Solder

Metric

GPSCNA11

12.3

4.0

0.016 (0.41)

0.610/0.642 (15.49/16.31)

0.005 (0.13)

0.002 (0.05)

Solder

U.S.

GPTCNA01

12.3

4.0

0.016 (0.41)

0.610/0.642 (15.49/16.31)

0.005 (0.13)

0.002 (0.05)

Screw

Metric

GPTCNA11

12.3

4.0

0.016 (0.41)

0.610/0.642 (15.49/16.31)

0.005 (0.13)

0.002 (0.05)

Screw

U.S.

GPSCLR01

5.3

0.5

0.158 (4.01)

0.653/0.717 (16.59/18.22)

0.063 (1.60)

0.002 (0.05)

Solder

Metric

GPSCLR11

5.3

0.5

0.158 (4.01)

0.653/0.717 (16.59/18.22)

0.063 (1.60)

0.002 (0.05)

Solder

U.S.

GPTCLR01

5.3

0.5

0.158 (4.01)

0.653/0.717 (16.59/18.22)

0.063 (1.60)

0.002 (0.05)

Screw

Metric

GPTCLR11

5.3

0.5

0.158 (4.01)

0.653/0.717 (16.59/18.22)

0.063 (1.60)

0.002 (0.05)

Screw

U.S.

GPSCRR01

5.3

0.5

0.158 (4.01)

1.094/1.158 (27.79/29.41)

0.063 (1.60)

0.002 (0.05)

Solder

Metric

GPSCRR11

5.3

0.5

0.158 (4.01)

0.653/0.717 (27.79/29.41)

0.063 (1.60)

0.002 (0.05)

Solder

U.S.

GPTCRR01

5.3

0.5

0.158 (4.01)

0.653/0.717 (27.79/29.41)

0.063 (1.60)

0.002 (0.05)

Screw

Metric

GPTCRR11

5.3

0.5

0.158 (4.01)

0.653/0.717 (27.79/29.41)

0.063 (1.60)

0.002 (0.05)

Screw

U.S.

Part Number

0.921±0.012 (23.4±0.3)

ø0.091 (ø2.3)

OP

1.00±0.004 (25.4±0.1)

0.692 (17.6)

1.953 (49.6)

1.945±0.032 (49.4±0.8) FP

0.189 (4.8)

t= 0.024 (0.6)

OP

Minimum Max. Movement Over-Travel Differential inches inches Terminal (mm) (mm) Type

Mounting Hole

0.925 (23.5)

1.00±0.004 (25.4±0.1) 1.953 (49.6)

1.783±0.031 (45.3±0.8)

FP

0.476 (12.1)

0.687±0.008 (17.6±0.2)

ø0.374x0.157 (ø9.5x4.0) t= 0.024 0.6)

OP

1.00±0.004 (25.4±0.1) 1.953 (49.6)

Specifications subject to change without notice.

0.476 (12.1)

0.693±0.008 (17.6±0.2)

47

Standard Part Numbers and Descriptions

Dimensions inches (mm) PT

0.921±0.012 (23.4±0.3)

Maximum Operating Force (oz.)

Minimum Release Force (oz.)

Maximum Pre-Travel inches (mm)

Operating Point Min./Max. inches (mm)

GPSCND01

12.3

4.0

0.016 (0.41)

1.09/1.13 (27.69/28.70)

0.063 (1.60)

0.002 (0.05)

Solder

Metric

GPSCND11

12.3

4.0

0.016 (0.41)

1.09/1.13 (27.69/28.70)

0.063 (1.60)

0.002 (0.05)

Solder

U.S.

GPTCND01

12.3

4.0

0.016 (0.41)

1.09/1.13 (27.69/28.70)

0.063 (1.60)

0.002 (0.05)

Screw

Metric

GPTCND11

12.3

4.0

0.016 (0.41)

1.09/1.13 (27.69/28.70)

0.063 (1.60)

0.002 (0.05)

Screw

U.S.

GPSCNC01

12.3

4.0

0.016 (0.41)

0.827/0.867 (21.01/22.02)

0.063 (1.60)

0.002 (0.05)

Solder

Metric

GPSCNC11

12.3

4.0

0.016 (0.41)

0.827/0.867 (21.01/22.02)

0.063 (1.60)

0.002 (0.05)

Solder

U.S.

GPTCNC01

12.3

4.0

0.016 (0.41)

0.827/0.867 (21.01/22.02)

0.063 (1.60)

0.002 (0.05)

Screw

Metric

GPTCNC11

12.3

4.0

0.016 (0.41)

0.827/0.867 (21.01/22.02)

0.063 (1.60)

0.002 (0.05)

Screw

U.S.

GPSCNH01

12.3

4.0

0.016 (0.41)

0.826/0.890 (20.98/22.60)

0.217 (5.51)

0.002 (0.05)

Solder

Metric

GPSCNH11

12.3

4.0

0.016 (0.41)

0.826/0.890 (20.98/22.60)

0.217 (5.51)

0.002 (0.05)

Solder

U.S.

GPTCNH01

12.3

4.0

0.016 (0.41)

0.826/0.890 (20.98/22.60)

0.217 (5.51)

0.002 (0.05)

Screw

Metric

GPTCNH11

12.3

4.0

0.016 (0.41)

0.826/0.890 (20.98/22.60)

0.217 (5.51)

0.002 (0.05)

Screw

U.S.

GPSCRH01

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Solder

Metric

GPSCRH11

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Solder

U.S.

GPTCRH01

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Screw

Metric

GPTCRH11

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Screw

U.S.

GPSCRH02

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Solder

Metric

GPSCRH12

12.3

4.0

0.016 (0.41)

1.240/1.320 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Solder

U.S.

GPTCRH02

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Screw

Metric

GPTCRH12

12.3

4.0

0.016 (0.41)

1.270/1.350 (32.59/34.29)

0.140 (3.56)

0.002 (0.05)

Screw

U.S.

Part Number ø0.157 (ø4.0)

OP

1.00±0.004 (25.4±0.1) 1.953 (49.6)

PT

0.921±0.012 (23.4±0.3)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

ø0.287 (ø7.3)

OP

1.00±0.004 (25.4±0.1) 1.953 (49.6)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

0.921±0.012 (23.4±0.3)

PT

0.327 (8.3)

Minimum Max. Movement Over-Travel Differential inches inches Terminal (mm) (mm) Type

Mounting Hole

OP 0.516 (13.1) 0.642 (16.3)

1.00±0.004 (25.4±0.1)

1.953 (49.6)

0.476 (12.1)

0.693±0.008 (17.6±0.2)

0.921±0.012 (23.4±0.3)

PT

ø0.5x0.150 (ø12.7x3.8) OP

M 0.472xP0.039 M (12xP1.0)

0.610 (15.5) 0.642 (16.3)

1.00±0.004 (25.4±0.1)

1.953 (49.6)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

0.906±0.012 (23.0±0.3)

PT

ø0.500x0.150 (ø12.7x3.8) OP

M 0.472xP0.039 (M 12.0xP1.0)

0.059 (15.5) 0.642 (16.3)

1.953 (49.6)

48

1.00±0.004 (25.4±0.1)

0.476 (12.1)

Specifications subject to change without notice.

0.693±0.008 (17.6±0.2)

®

Standard Part Numbers and Descriptions Maximum Operating Force (oz.)

Minimum Release Force (oz.)

Maximum Pre-Travel inches (mm)

Operating Point Min./Max. inches (mm)

GPSCLS01

2.4

0.5

0.394 (10.01)

0.716/0.780 (18.19/19.81)

0.220 (5.59)

0.050 (1.27)

Solder

Metric

GPSCLS11

2.4

0.5

0.394 (10.01)

0.716/0.780 (18.19/19.81)

0.220 (5.59)

0.050 (1.27)

Solder

U.S.

GPTCLS01

2.4

0.5

0.394 (10.01)

0.716/0.780 (18.19/19.81)

0.220 (5.59)

0.050 (1.27)

Screw

Metric

GPTCLS11

2.4

0.5

0.394 (10.01)

0.716/0.780 (18.19/19.81)

0.220 (5.59)

0.050 (1.27)

Screw

U.S.

GPSCLS02

3.1

0.7

0.315 (8.00)

0.716/0.780 (18.19/19.81)

0.165 (4.19)

0.040 (1.02)

Solder

Metric

GPSCLS12

3.1

0.7

0.315 (8.00)

0.716/0.780 (18.19/19.81)

0.165 (4.19)

0.040 (1.02)

Solder

U.S.

GPTCLS02

3.1

0.7

0.315 (8.00)

0.716/0.780 (18.19/19.81)

0.165 (4.19)

0.040 (1.02)

Screw

Metric

GPTCLS12

3.1

0.7

0.315 (8.00)

0.716/0.780 (18.19/19.81)

0.165 (4.19)

0.040 (1.02)

Screw

U.S.

GPSCRS01

3.5

0.8

0.280 (7.11)

1.157/1.221 (29.39/31.01)

0.158 (4.01)

0.040 (1.02)

Solder

Metric

GPSCRS11

3.5

0.8

0.280 (7.11)

1.157/1.221 (29.39/31.01)

0.158 (4.01)

0.040 (1.02)

Solder

U.S.

GPTCRS01

3.5

0.8

0.280 (7.11)

1.157/1.221 (29.39/31.01)

0.158 (4.01)

0.040 (1.02)

Screw

Metric

GPTCRS11

3.5

0.8

0.280 (7.11)

1.157/1.221 (29.39/31.01)

0.158 (4.01)

0.040 (1.02)

Screw

U.S.

GPSCRM01

5.6

1.4

0.106 (2.70)

1.173/1.205 (29.79/30.61)

0.095 (2.41)

0.020 (0.51)

Solder

Metric

GPSCRM11

5.6

1.4

0.106 (2.70)

1.173/1.205 (29.79/30.61)

0.095 (2.41)

0.020 (0.51)

Solder

U.S.

GPTCRM01

5.6

1.4

0.106 (2.70)

1.173/1.205 (29.79/30.61)

0.095 (2.41)

0.020 (0.51)

Screw

Metric

GPTCRM11

5.6

1.4

0.106 (2.70)

1.173/1.205 (29.79/30.61)

0.095 (2.41)

0.020 (0.51)

Screw

U.S.

GPTCRG01

5.6

1.4

0.106 (2.70)

1.594/1.658 (40.49/42.11)

0.095 (2.41)

0.020 (0.51)

Solder

Metric

GPTCRG11

5.6

1.4

0.106 (2.70)

1.594/1.658 (40.49/42.11)

0.095 (2.41)

0.020 (0.51)

Screw

U.S.

Part Number

Dimensions inches (mm) 1.024 (26.0)

R 2.5 (R 63.5)

0.795 (20.2) 0.677 (17.2)

t= 0.039 (1.0)

OP

FP

Minimum Max. Movement Over-Travel Differential inches inches Terminal (mm) (mm) Type

Mounting Hole

0.193 (4.9) 1.00±0.004 (25.4±0.1) 1.953 (49.6)

0.547 (13.9)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

1.024 (26.0)

4 R 1.65 ) (R 42

t= 0.039 (1.0)

0.795 (20.2) 0.677 (17.2)

OP

FP

0.193 (4.9) 1.00±0.004 (25.4±0.1) 1.953 (49.6)

0.547 (13.9)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

0.795 (20.2)

1.024 (26.0)

ø0.374x0.157 (ø9.5x4.0)

.909 R 1 48.5) (R FP OP

0.677 (17.2)

0.547 (13.9)

1.00±0.004 (25.4±0.1) 1.953 (49.6)

0.476 (12.1) 0.693±0.008 (17.6±0.2)

1.024 (26.0)

ø0.374x0.157 (ø9.5x4.0)

7 .04 6) R 1 2 6. (R

0.795 (20.2)

FP OP

0.677 (17.2)

0.547 (13.9)

0.476 (12.1)

1.00±0.004 (25.4±0.1) 1.953 (49.6)

1.024 (26.0) R (R 1.04 31 7 .9)

Operating direction

0.693±0.008 (17.6±0.2)

ø0.374x0.157 (ø9.5x4.0) R 0.437 (R 11.1)

FP OP

0.795 (20.2) 0.677 (17.2)

1.953 (49.6)

0.547 (13.9)

1.00±0.004 (25.4±0.1)

0.476 (12.1)

Specifications subject to change without notice.

0.693±0.008 (17.6±0.2)

49

GENERAL PURPOSE — SINGLE & DOUBLE POLE

E Series Features

Thermoplastic actuating button Stainless steel springs



5 current ratings



Choice of actuator styles



3 terminal types (optional screw terminals available — consult factory)

Phenolic case NC terminal

Common terminals

NO terminal



3 contact arrangements

NC terminal



Long-life coil spring mechanism

NO terminal



High-temperature 150°C and 200°C available on select models (consult factory)

Brass moving blades

Silver alloy, silver-cadmium oxide or gold crosspoint contacts

Electrical Ratings Switch Series

EN61058 Rating

E13/E19

N/A

E19A (mixed ratings) E14/E25

N/A

E20

N/A

E28/E29

N/A

E30

N/A

G13/G20

N/A

N/A

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

15A, 125/250VAC; 3/4HP, 125VAC 1-1/2HP, 250VAC 15A, 125/250VAC; 0.1A, 125VAC

N/A

6,000*

N/A

6,000

25A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC 20A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC 30.1A, 125/250/277VAC (UL Approved Only — Resistive Load Only) 30.1A, 125/250VAC; 1HP, 125VAC 2HP, 250VAC 0.1A, 125VAC

N/A

6,000

N/A

6,000

N/A

6,000

N/A

6,000

N/A

6,000* *Indicates 100K life available.

Specifications Electrical

Temperature Rating: Flammability Rating:

105°C Std. (150°C and 200°C optional — E13, E14, E19, E20, G13) 85°C Std. (E28 and E29) UL94HB

Materials

Case: Actuating Button: Common Terminals: NO and NC Terminals: Moving Blade: Spring: Auxiliary Actuators: Roller: Contacts:

General Purpose Phenolic Thermoplastic Nylon Brass (E13, E19, E19A, G13, G20) Silver-Plated Brass (E14, E20, E28, E29, E30) Brass (E13, E19, E19A, G13, G20) Copper (E14, E20, E28, E29, E30) Brass (E13, E19, E19A, G13, G20) Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30) Stainless Steel Cold-Rolled Steel (Nickel-Plated) Sintered Stainless Steel Gold Crosspoint (G13, G20, E19A) Silver-Cadmium Oxide (E13, E14, E19, E20, E28) Silver Alloy (E19A, E29, E30)

(E25 only)

®

Dimensions — Single Pole inches (mm)

Actuators — Single Pole

Cavity for External Auxiliary Actuator

Standard type integral hinged lever and roller actuators are available in choice of two mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown.

0.306 + - 0.005 (7.77 + - 0.13)

0.250 (6.35) x 0.032 (0.813) Q.C. or Faston Terminal

0.640 + - 0.015 (16.26 + - 0.38)

0.095 (2.41) Dia. Hole (3 places) 0.135 x 0.175 +0.005 –0.010 0.150

0.145 (3.68) Diameter +0.005 -0.010 0.130 (3.30)

0.640 + - 0.015 (16.26 + - 0.38)

0.300 (7.62)

Actuation Length

0.375 (9.53) diameter

0.500 (12.7)

High Ratio Actuation Length

0.380 + - 0.015 (9.65 + - 0.38)

N.C. COM

0.250 (6.35)

Switch Mounting Hole

Reference Line

0.195 (4.95)

0.375 (9.53)

Standard Ratio 0.375 (9.53) 0.250 (6.35)

N.O. 30° 1.000 + - 0.007 (25.4 + - 0.18) 1.823 + - 0.015 (46.30 + - 0.38)

0.33 (8.38) 0.41 (10.41)

Switch Mounting Hole

0.41 (10.41)

High Ratio

Standard Ratio

0.364 + - 0.015 (9.25 + - 0.38)

“J” & “M” Type Optional Hardware — Single Pole

Actuator Specifications — Single Pole

–00E

425

0.050 (1.27)

0.285±0.020 (7.24±0.51)

0.100 (2.54)

0.015 (0.38)



Brass Hex Nut Brass Knurled Nut Brass Hex Nut (Nickel-Plated)

850

0.100 (2.54)

0.248±0.026 (6.30±0.66)

0.050 (1.27)

0.015 (0.38)



Brass Knurled Nut (Nickel-Plated)

0012-0021

E14/E29/E30 –00A E13/G13

425

0.050 (1.27)

0.670±0.030 (17.02±0.76)

0.108 (2.74)

0.015 (0.38)



Star Washer

0012-0073

850

0.100 (2.54)

0.633±0.030 (16.08±0.76)

0.050 (1.27)

0.015 (0.38)



425

0.050 (1.27)

0.812±0.030 (20.63±0.76)

0.218 (5.54)

0.015 (0.38)



850

0.100 (2.54)

0.775±0.030 (19.69±0.76)

0.168 (4.27)

0.015 (0.38)



100

0.250 (6.35)

0.312±0.062 (7.93±1.57)

0.187 (4.75)

0.093 (2.36)

1.500 (38.10)

285

0.312 (7.93)

0.468±0.062 (11.89±1.57)

0.150 (3.81)

0.050 (1.27)

0.821 (20.85)

65

0.343 (8.71)

0.281±0.062 (7.14±1.57)

0.187 (4.75)

0.140 (3.56)

1.750 (44.45)

170

0.525 (13.34)

0.437±0.062 (11.10±1.57)

0.218 (5.54)

0.080 (2.03)

1.071 (27.20)

100

0.250 (6.35)

0.718±0.062 (18.24±1.57)

0.187 (4.75)

0.093 (2.36)

1.391 (35.33)

285

0.348 (8.84)

0.860±0.062 (21.84±1.57)

0.130 (3.30)

0.045 (1.14)

0.652 (16.56)

65

0.343 (8.71)

0.687±0.062 (17.45±1.57)

0.187 (4.75)

0.140 (3.56)

1.645 (41.78)

170

0.483 (12.27)

0.828±0.062 (21.03±1.57)

0.218 (5.54)

0.073 (1.85)

0.902 (22.91)

Series/ Prefix

Actuator Type

E13/G13

Switch Type

Maximum Maximum Operating Pre-Travel Force inches (g) (mm)

–00J

E14/E29/E30 E13/G13

–00M

E14/E29/E30 E13/G13

–00H

E14/E29/E30† E13/G13

–50H

E14/E29/E30† E13/G13

–00K

E14/E29/E30† E13/G13

–50K

E14/E29/E30†

Operating Point* inches (mm)

Minimum Max. Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm)

Ordering Information

Mounting — Single Pole

Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch you need.

Recommended mounting screw: #6-32 round head. Recommended torque on screw: 6 inch lbs. max.

Thermoplastic Button - OOJ Suffix 3/8 x 32 Thread

0.406 (10.31)

* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm). † E14, E29 and E30 actuators are shorter and formed up 11° at the button.

Specifications subject to change without notice.

Extra Over-travel with Internal Spring-loaded Metal Button - OOM Suffix

0012-0023 0012-0025 0012-0028

0.312 (7.93) Flat Both Sides

Circuitry — Single Pole Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. Example: E13-00E is double throw, E13-01E is normally open, and E13-02E is normally closed.

Terminals — Single Pole Standard 0.250″ x 0.032″ (6.35mm x 0.81mm) [Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)] QC terminals can be furnished with angle formed up or down. Forms include straight 30°, 45°, 85° up or down. Other forms can be provided. Screw terminal UL approved on E14 and E30 only. 51

Dimensions — Double Pole

Actuators — Double Pole

inches (mm)

Standard type integral hinged lever and roller actuators are available in choice of two mounting positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown.

0.095 (2.41) Dia Hole (6 Places)

Cavity for Aux. External Actuator

Note: With respect to operating sequence, pole 1 or 2 may operate first (virtually same time). If pole 1 or 2 must always operate in a particular sequence (1 before 2 or 2 before 1), consult factory.

0.641 + - 0.015 (16.28 + - 0.38)

0.250 (6.35) x 0.032 (0.81) Thk. Quick Connect Terminal (6 places) 0.300 + - 0.015 0.145 (3.68) +0.005 (7.62 + –0.010 - 0.38) 0.130 (3.30)

0.135 x 0.175 +0.005 0.150 –0.010

0.195 + - 0.015 (4.95 + - 0.38)

30° (2 places)

Actuation Length

0.375 (9.53) Diameter

Reference Line

0.380 + - 0.015 (9.65 + - 0.38)

0.250 (6.35)

Switch Mounting Hole High Ratio

1.125 + - 0.015 (28.58 + - 0.38) 0.706 + - 0.015 (17.93 + - 0.38)

Actuation Length

0.786 + - 0.015 (19.96 + - 0.38)

N.O.

0.250 (6.35)

N.O.

0.330 (8.38) 1.000 + - 0.007 (25.4 + - 0.18) 1.813 + - 0.015 (46.05 + - 0.38)

0.500 (12.7)

0.601 + - 0.015 (15.27 + - 0.38)

Switch Mounting Hole

0.36 + - 0.015 (9.14 + - 0.38)

High Ratio

E19/G20

Switch Type

Maximum Maximum Operating Pretravel Force inches (g) (mm)

–00A

E20/E28 E19/G20

1280 –-00J

E20/E28† E19/G20

–00M

–00H

–50H

130 285

–00K

E20/E28† E19/G20

205 425

E20/E28† E19/G20

850 1280

E20/E28† E19/G20

850 1280

E20/E28† E19/G20

850

212 425

–50K

E20/E28†

150 312

0.050 (1.27) 0.100 (2.54) 0.050 (1.27) 0.100 (2.54) 0.050 (1.27) 0.100 (2.54) 0.275 (6.99) 0.330 (8.38) 0.400 (10.16) 0.600 (15.24) 0.250 (6.35) 0.348 (8.84) 0.312 (7.92) 0.525 (13.34)

“J” & “M” Type Optional Hardware — Double Pole Operating Point* inches (mm)

0.285±0.030 (7.24±0.76) 0.248±0.030 (6.30±0.76) 0.670±0.030 (17.02±0.76) 0.630±0.030 (16.00±0.76) 0.812±0.030 (20.62±0.76) 0.774±0.030 (19.66±0.76) 0.312±0.062 (7.92±1.57) 0.468±0.062 (11.89±1.57) 0.281±0.062 (7.14±1.57) 0.437±0.062 (11.10±1.57) 0.718±0.062 (18.24±1.57) 0.860±0.062 (21.84±1.57) 0.687±0.062 (17.45±1.57) 0.828±0.062 (21.03±1.57)

0012-0023 0012-0025 0012-0028



Brass Hex Nut Brass Knurled Nut Brass Hex Nut (Nickel-Plated)



Brass Knurled Nut (Nickel-Plated)

0012-0021



Star Washer

0012-0073

Minimum Max. Movement Actuation Overtravel Differential Length inches inches inches (mm) (mm) (mm)

0.080 (2.03) 0.050 (1.27) 0.080 (2.03) 0.050 (1.27) 0.218 (5.54) 0.188 (4.78) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.156 (3.96) 0.187 (4.75) 0.146 (3.71)

0.015 (0.38) 0.015 (0.38) 0.015 (0.38) 0.015 (0.38) 0.015 (.038) 0.015 (0.38) 0.093 (2.36) 0.050 (1.27) 0.140 (3.56) 0.080 (2.03) 0.093 (2.36) 0.045 (1.14) 0.140 (3.56) 0.075 (1.91)

— —

1.500 (38.10) 0.821 (20.85) 1.750 (44.45) 1.071 (27.20) 1.391 (35.33) 0.652 (16.56) 1.645 (41.78) 0.902 (22.91)

Contact factory for E25 specifications.

Ordering Information

Mounting — Double Pole

Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch you need. Note: Consult factory for part number when ordering E19A switches.

Recommended mounting screw: #6-32 round head. Recommended torque on screw: 6 inch lbs. max.

Specifications subject to change without notice.

Extra Over-travel with Internal Spring-loaded Metal Button - OOM Suffix

Thermoplastic Button - OOJ Suffix 3/8 x 32 Thread



* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm). † E20 and E28 actuators are shorter and formed up 15° at the button.

52

Standard Ratio

0.406 + - 0.015 (10.31 + - 0.38)

Actuator Specifications — Double Pole Actuator Type

0.375 (9.53)

N.C.

COM

Series/ Prefix

Standard Ratio

N.C.

COM

0.406 + - 0.015 (10.31 + - 0.38)

0.375 (9.53)

0.406 (10.31)

0.312 (7.93) Flat Both Sides

Circuitry — Double Pole Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. Example: E19-00A is double throw, E19-01A is normally open, and E19-02A is normally closed.

Terminals — Double Pole Standard 0.250″ x 0.032″ (6.35mm x 0.81mm) [Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)] QC terminals can be furnished with angle formed up or down on common as well as open or closed terminal. Forms include straight 30°, 45°, 85° up or down. Other forms can be provided.

®

PANEL MOUNT PUSHBUTTON — SINGLE & DOUBLE POLE

E Series Features ●

Choice of Momentary, Push-Pull (reset) and Cheat Interlock switches



Snap-in panel mounting



Long-life coil spring, snap-action mechanism



Agency approved extended-life versions available



VDE approval available on select models (F Series)



Various terminal forms available (consult factory)

Thermoplastic actuating button

Thermoplastic case

Stainless steel spring

Copper alloy blades

Common terminal

Silver alloy, silver-cadmium oxide or gold crosspoint contacts

Brass terminals

Common terminal NC terminal

NO terminal NO terminal

NC terminal

Electrical Ratings Switch Series

E65 E/F68 E/F69 E/F77 E/F78 E/F79 E75

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

EN61058 Rating

UL1054 Rating

N/A 0.1(0.05)A, 125VAC 10(4)A, 250VAC 0.1(0.05)A, 125VAC 10(4)A, 250VAC 0.1(0.05)A, 125VAC 10(4)A, 250VAC N/A

16A, 125/250VAC; 1/3HP, 125/250VAC 0.1A, 125VAC 10A, 125/250VAC; 1/3HP, 125/250VAC 0.1A, 125VAC; 10A, 1/3HP, 125/250VAC

N/A 50,000 50,000 50,000

6,000 6,000* 6,000* 6,000*

0.1A, 125VAC 10A, 125/250VAC; 1/3HP, 125/250VAC 16A, 125/250VAC; 1/3HP, 125/250VAC

50,000 50,000 N/A

6,000* 6,000* 6,000 *Indicates 100K life available.

Specifications Electrical

Temperature Rating: Flammability Rating:

-40° to +85°C UL94V-O

Materials

Case: Actuating Button: Terminals*: Moving Blade: Spring: Contacts:

Thermoplastic Polyester (Valox used on International versions) Thermoplastic Acetal (Valox used on International versions) Brass Beryllium Copper Stainless Steel Silver Alloy (E65, E/F69) Silver-Cadmium Oxide (E75, E/F77, E/F79) Gold Crosspoint (E/F68, E/F77)

*Common terminals are plated — the remaining two terminals are not plated.

(optional)

53

Dimensions — Single Pole

Auxiliary Buttons — Single Pole

inches (mm)

–50A has button with special shaft to accept auxiliary push buttons for manual actuation. Consult factory for auxiliary buttons.

0.34 (8.64) dia.

0.080 (2.03)

COM NC NO

0.410 (10.41) 0.145 (3.68)

0.46 (11.68) 1.25 (31.75)

0.145 + - 0.020 0.156 (3.683 + - 0.51) (3.96)

0.865 (21.97) 1.010 (25.65)

A

A

0.375 (9.53)

- 20A

- 30A 0.315 dia. A

A

A

0.510 (12.95) 0.540 (13.72)

Pulled out

0.050 (1.27) R max. 0.550 (13.97)

A

- 00A

See Panel Cutout Detail

80°

0.099 (2.51)

”A” dimension (full overtravel position) 0.68 (17.27)

0.875 + - 0.030 (22.23 + - 0.76) Rest Position 0.770 + 0.050 (19.56 + - 1.27) Operating Position

0.615 0.834 (15.62) 0.97 (21.18) (24.64)

0.376 + - 0.020 (9.55 + - 0.51)

Button Detail — Single Pole

0.060 (1.52) Reference R Line

0.34 (8.64) dia.

- 30A

Panel Cutout Detail

Cut out 1.115 (28.32) for 0.045 (1.14) thick panel Cut out 1.125 (28.58) for 0.100 (2.54) thick panel

- 40A

- 50A

Circuitry — Single Pole Double throw or single throw versions available.

Actuator Specifications — Single Pole

Actuator Switch Type Type

Rest Position inches (mm)

Maximum Pre-Travel inches (mm)

Operating Point* inches (mm)

Maximum Minimum Max. Movement Maximum Full Overtravel Over-Travel Differential Operating Position inches inches Force** inches (mm) (mm) (g) (mm)

Basic Momentary Action

–00A

0.845–0.905 0.125 0.720–0.820 0.375 (21.46–22.99) (3.18) (18.29–20.83) (9.53)

–20A

0.920–0.980 0.150 0.800–0.900 0.300 (22.37–24.89) (3.81) (20.32–22.86) (7.62)

–30A†

0.730–0.790 0.125 0.610–0.710 0.100 (18.54–20.07) (3.18) (15.49–18.03) (2.54)

Single Pole Series: E65, E68/F68, E69/F69

Terminals — Single Pole This switch series has 0.187″ x 0.020″ (4.75mm x 0.51mm) as standard for up to 10 amps and 0.250″ x 0.032″ (6.35mm x 0.81mm) for 16 amps.

0.045 (1.14)

425

0.400 (10.16)

0.045 (1.14)

285

0.500 (12.70)

Consult factory for non-standard terminal options.

0.045 (1.14)

475

0.520 (13.21)

International Versions — Single Pole

0.060 (1.52)

385

0.980 (24.89)

0.175 (4.45)

0.045 (1.14)

425

0.125 (3.18)

0.175 (4.45)

0.045 (1.14)

425

0.125 (3.18)

Push-Pull (Reset)

Momentary

“Cheat Interlock” (Pull out to lock)

0.730–0.790 0.125 0.800–0.900 0.050 (18.54–20.07) (3.18) (20.32–22.86) (1.27) Short Button Momentary

–40A

0.420–0.480 0.125 (10.67–12.19) (3.18)

–50A

0.420–0.480 0.125 (10.67–12.19) (3.18)

0.300–0.400 (7.62–10.16)

For Auxiliary Push Button

0.300–0.400 (7.62–10.16)

*Measured above reference line. Refer to dimensional drawing above. **Operating Forces listed above are for E68/E69 switches only. E65 Operating Force: 708 grams max. for momentary switches. †Dual function switch: Push in to operate in normal momentary mode and pull out for maintained action.

Ordering Information Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. Example: SPDT: E68–30A, SPST NO: E68–31A, SPST NC: E68–32A.

54

Specifications subject to change without notice.

For VDE applications, standard terminals are 0.187″ x 0.032″ (4.75mm x 0.81mm). Switch prefix must be “F” for VDE approved switches. Example: F68–30A was E68–30A.

®

Dimensions — Double Pole

Auxiliary Buttons — Double Pole

inches (mm)

–50A has button with special shaft to accept auxiliary push buttons for manual actuation. Consult factory for auxiliary buttons.

0.34 (8.64) dia.

Operating Position Rest Position

0.080 (2.03)

Button Detail — Double Pole

0.060 (1.52) R

”A” dimension (full overtravel position) 0.68 (17.27)

Reference Line 0.97 (24.64) COM COM NC NO NO NC

A

0.79 (20.07) 1.57 (39.88)

- 00A

0.045 (1.14) 0.100 (2.54) Thick Mounting Panel (see panel cutout detail)

0.375 (9.53)

- 30A 0.315 dia. A

Pulled out

0.050 (1.27) R max. 0.550 (13.97)

- 20A

A

A

0.510 (12.95) 0.540 (13.72)

1.24 (31.5)

A

A

- 30A Cut out 1.455 (36.96) for 0.045 (1.14) thick panel Cut out 1.455 (36.96) for 0.100 (2.54) thick panel

Panel Cutout Detail

- 40A

- 50A

Circuitry — Double Pole Double throw or single throw versions available.

Actuator Specifications — Double Pole

Actuator Switch Type Type

Rest Position inches (mm)

Maximum Pre-Travel inches (mm)

Operating Point* inches (mm)

Minimum Max. Movement Maximum Overtravel Differential Operating inches inches Force** (mm) (mm) (g)

Max. Full Over-Travel Position inches (mm)

Basic Momentary Action

Double Pole Series: E77/F77, E78/F78, E79/F79, E75

Terminals — Double Pole

0.075 (1.91)

680

0.400 (10.16)

This switch series has 0.187″ x 0.020″ (4.75mm x 0.51mm) as standard for up to 10 amps and 0.250″ x 0.032″ (6.35mm x 0.81mm) for 16 amps.

0.075 (1.91)

510

0.500 (12.70)

Consult factory for non-standard terminal options.

0.075 (1.91)

757

0.520 (13.21)

0.090 (2.29)

567

0.980 (24.89)

For VDE applications, standard terminals are 0.187″ x 0.032″ (4.75mm x 0.81mm).

0.175 (4.45)

0.075 (1.91)

680

0.125 (3.18)

Switch prefix must be “F” for VDE approved switches. Example: F78–30A was E68–30A.

0.175 (4.45)

0.075 (1.91)

680

0.125 (3.18)

–00A

0.845–0.905 0.125 0.720–0.820 0.375 (21.46–22.99) (3.18) (18.29–20.83) (9.53)

–20A

0.920–0.980 0.150 0.800–0.900 0.300 (23.37–24.89) (3.81) (20.32–22.86) (7.62)

–30A†

0.730–0.790 0.125 0.610–0.710 0.100 (18.54–20.07) (3.18) (15.49–18.03) (2.54)

Push-Pull (Reset)

Momentary

“Cheat Interlock” (Pull out to lock)

0.730–0.790 0.155 0.800–0.900 0.030 (18.54–20.07) (3.94) (20.32–22.86) (0.76) Short Button Momentary

–40A

0.420–0.480 0.125 (10.67–12.19) (3.18)

–50A

0.420–0.480 0.125 (10.67–12.19) (3.18)

0.300–0.400 (7.62–10.16)

International Versions — Double Pole

For Auxiliary Push Button

0.300–0.400 (7.62–10.16)

*Measured above reference line. Refer to dimensional drawing above. **Operating Forces listed above are for E78/E79 switches only. E75 Operating Force: 921 grams max. for momentary switches. †Dual function switch: Push in to operate in normal momentary mode and pull out for maintained action.

Ordering Information Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. Example: DPDT: E78–30A, DPST NO: E78–31A, DPST NC: E78–32A.

Specifications subject to change without notice.

55

LINE INTERRUPT

F80 Series Features ●

Snap-in panel mounting



High overtravel



Choice of button barrier or standard housing



3 terminal types



Double make/double break shorting bars



Agency approved extended-life versions available



International approval available



3mm (0.12″) minimum contact gaps



Over 200 versions available

Direct action shorting bars

Thermoplastic case and actuating button

Silver alloy or gold crosspoint contacts

Snap-in panel mounting

Stainless steel springs 2-pole, 2-rating option

NO terminal NC terminal

NO terminal NC terminal

Brass terminals

NO terminals

Electrical Ratings Switch Series

EN61058 Rating

F81

10(3)A, 400VAC

F82

16(6)A, 250VAC

F83 F84

0.1(0.5)A, 250VAC Mixed Ratings Consult Factory

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

UL1054 Rating

10A, 125/250VAC, 3/4HP, 125VAC 1-1/2HP, 250VAC; 6A, 30VDC 16A, 125/250VAC, 3/4HP, 125VAC 1-1/2HP, 250VAC; 6A, 30VDC 0.1A, 125/250VAC Combines two different ratings in a single switch. Consult factory for special part number.

50,000

6,000*

50,000

6,000*

50,000

6,000*

50,000

6,000* *Indicates 100K life available.

Specifications Electrical

Temperature Rating: Flammability Rating:

-25° to +85°C UL94V-O

Materials

Case: Actuating Button: Terminals: Moving Blade: Springs: Guide Pin: Contacts:

Thermoplastic Polyester Thermoplastic Polyester Brass Brass Stainless Steel Thermoplastic Nylon Silver Alloy (F81, F82) Gold Crosspoint (F83) Silver Alloy/Gold Crosspoint (F84)

®

Dimensions inches (mm) Basic Case Housing (F82J-A120)

Button Barrier Housing (F81J-B110) 1.445 (36.70) for 0.045 (1.14) Thick Panel 1.455 (36.96) for 0.100 (2.54) Thick Panel

1.57 (39.88) 0.440 (11.18) Dia.

0.685 (17.40)

0.060 (1.52) R (4) 0.220 + - 0.005 (5.59 + - 0.18)

0.550 (13.97)

1.24 (31.5)

0.050 (1.27) R Max. Typ.

0.685 (17.40)

0.060 (1.52) R (4)

Panel Cut Out

0.543 (13.79) 1.24 (31.5)

0.22 (5.59) Dia.

0.060 (1.52) R (2)

0.083 (2.11)

1.57 (39.88)

0.79 (20.07)

0.709 (18.01)

0.228 (5.79) Dia.

0.827 (21.01)

0.155 (3.94)

0.220 + - 0.005 (5.59 + - 0.13)

0.155 (3.94)

0.083 (2.108)

Reference Line

0.060 (1.52) R (2)

Reference Line 0.933 (23.7)

1.213 (30.81)

1.075 (27.31) N.O. N.C.

N.O. N.O.

N.O.

0.499 (12.68)

0.933 (23.7) 1.075 (27.31)

N.C.

1.213 (30.81) N.O.

0.070 (1.78) Dia. (6 plcs)

0.520 (13.21) 11° + - 2° (x 2)

0.36 + - 0.02 (9.14 + - 0.51)

N.O.

N.O.

N.C.

0.055 (1.40) Dia. (6 plcs)

0.40 + - 0.015 (10.16 + - 0.38)

0.032 x 0.250 (0.81 x 6.35) Q.C. Terminal (6 plcs)

0.91 + - 0.02 (23.11 + - 0.51)

1.05 (26.67) 1.45±0.030 (36.83±0.76)

N.O.

N.C.

1.05 (26.67) 1.25±0.030 (31.75±0.76)

Actuator Specifications

0.187 (4.75) x 0.032 (0.81) Q.C. Terminal (6 plcs)

0.43 + - 0.015 (10.92 + - 0.38) 0.90 + - 0.02 (22.86 + - 0.51)

0.35 + - 0.02 (8.9 + - 0.51)

0.522±0.015 (13.26±0.38)

0.522±0.015 (13.26±0.38)

Case Styles

Switch Type

Maximum Operating Force (g)

Maximum Pre-Travel inches (mm)

Operating Point inches (mm)

Minimum Overtravel inches (mm)

Full Over-Travel Position inches (mm)

Max. Rest Position* inches (mm)

F81J-A120

866

F82J-A120

866

F81A-A120

866

F82A-A120

866

F81X-A120

866

F82X-A120

866

F82Y-A120**

250

0.236 (5.99) 0.236 (5.99) 0.236 (5.99) 0.236 (5.99) 0.236 (5.99) 0.236 (5.99) 0.030 (0.76)

0.354±0.030 (8.99±0.76) 0.354±0.030 (8.99±0.76) 0.354±0.030 (8.99±0.76) 0.354±0.030 ( 8.99±0.76) 0.354±0.030 (8.99±0.76) 0.354±0.030 (8.99±0.76) 0.354±0.030 (8.99±0.76)

0.079 (2.01) 0.079 (2.01) 0.079 (2.01) 0.079 (2.01) 0.079 (2.01) 0.079 (2.01) 0.250 (6.35)

0.314 (7.98) 0.314 (7.98) 0.314 (7.98) 0.314 (7.98) 0.314 (7.98) 0.314 (7.98) 0.314 (7.98)

0.551 (14.00) 0.551 (14.00) 0.551 (14.00) 0.551 (14.00) 0.551 (14.00) 0.551 (14.00) 0.490 (12.45)

Basic Case Housing

Button Barrier Housing

Button Barrier with “Cheat” Interlock Tool

“Cheat” Interlock Part Number: White: 0014-4945 Red: 0014-5451

*Measured above reference line. **Operating Force and Pretravel are measured when N.C. Pole Breaks.

Ordering Information F8

2

J

Series/Prefix

Code 1 2 3 4*

Current Rating UL/CSA 10A, 125/250VAC; 3/4HP, 125VAC; 1.5HP, 250VAC; 6A @ 30VDC 16A, 125/250VAC; 3/4HP, 125VAC; 1.5HP, 250VAC; 6A @ 30VDC 0.1A, 125/250VAC Mixed Ratings

*Special order — contact factory.

VDE 10(3)A 400VAC 16(6)A 250VAC 0.1(0.5)A 250VAC

Code Pole Contact Configuration A 1 & 3 SPST NO DM 2 Vacant J 1 SPST NO DM 2 SPDT NC DB 3 SPDT NO DM X 1 & 2 Vacant 3 SPST NO DM Y 1 & 3 Vacant 2 SPST NC DB Z 1 Vacant 2 SPDT NC BD 3 SPDT NO DM V 1 SPST NO DM 2 & 3 Vacant

A

1

Code Case A Basic B Actuator Barrier

10**

Code Type 1 Standard W Special

Pole Identification Code 10 20 40

1

1 2

3

3

Terminal Type inches (mm) 0.187 x 0.020 (4.75 x 0.51) QC 0.250 x 0.032 (6.35 x 0.81) QC 0.187 x 0.032 (4.75 x 0.81) QC

**To order 100,000 cycle UL approved switch, last digit of part number must be ‘L’. For example: F81J-A12L

2

DB = Dead Break • DM = Dead Make Specifications subject to change without notice.

57

POWER ROCKER SWITCH

CR Series Features ●

Rugged design with current switching up to 20 amps



2-color molded button available for maximum visibility



Lighted and non-lighted versions



Splash-proof option available



Available in a wide variety of colors



Fits to 3 panel cut-out widths



Mechanical life: min. 100,000 operations

Stylized matte finish bezel

Crisp detent activation

Bright red secondary button color available

Self-locking tolerance compensation ribs for tight fit

Durable silver alloy contacts for up to 20 amp switching Rugged press-fit terminals .250″ (6.3mm) wide x .031″ (0.8mm) thick to fit standard Quick-Connect connectors

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

CR

16(4)A, 250V~, T125

20A, 125VAC; 16A, 250VAC; 3/4HP, 250VAC

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC 0.020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Housing: Case: Spring: Contacts: Movable Arm: Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Nylon 66 94V-2 Steel Wire Silver Alloy Silver-Plated Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

1.071±0.012 (27.20±0.30)

Y

0.650 (16.50) 0.555 (14.10) 0.374 (9.50)

0.237 (6.01[REF])

1.252 (31.80)

X

1.458 (37.03)

0.764 (19.41)

0.083 (2.10)

Z = Panel Thickness

Recommended Panel Cut-Out Dimensions inches (mm)

0.374 (9.50)

SUFFIX E Dim. Z

0.031 (0.80)

Ø0.067 (Ø1.70)

SUFFIX F

Dim. Y

Dim. X

0.030 to 0.049 1.120 0.476 (0.75 to 1.25) (28.49) (12.10) 0.049 to 0.079 1.130 0.476 (1.25 to 2.00) (28.70) (12.10) 0.079 to 0.118 1.150 0.476 (2.00 to 3.00) (29.21) (12.10)

0.250 (6.3) 0.476 (12.10)

0.374 (9.50) 0.906 (23.00)

Dim. X

Dim. Y

1.120 0.528 (28.49) (13.41) 1.130 0.528 (28.70) (13.41) 1.150 0.528 (29.21) (13.41)

SUFFIX G or W Dim. X

Dim. Y

1.120 0.543 (28.49) (13.80) 1.130 0.543 (28.70) (13.80) 1.150 0.543 (29.21) (13.80)

Examples of Common Part Numbers and Descriptions inches (mm) Part Number

Circuitry

Actuator/ Housing Color

Switch Function

Terminal Type

CRE22F2FBBNE

On – Off

0.250 (6.3) Quick-Connect

Black/Black

Legend Marking

CRE22F4BBBNE

On – Off

0.250 (6.3) Quick-Connect

Red-Black/Black

CRE24F2HBBNE

On – Off – On

0.250 (6.3) Quick-Connect

Black/Black

CRE22F2BBRLE

On – Off/Lighted

0.250 (6.3) Quick-Connect

Red/Black

CRE22F4BBBNW

On – Off

0.250 (6.3) Quick-Connect

Red-Black/Black Splash-Proof

Ordering Information 2

2

Code Circuitry 2 Single-Pole

Code Contact Rating 20A, 125VAC; 16A, 250VAC (UL & CSA) E 3/4HP, 250VAC (UL) 16(4)A, 250VAC~, T125 (VDE)

Code 2 3 4

F 2 Switch Function On – Off On – On On – Off – On

Code Actuator Type 2 Curve – One Color 4 Curve – Two Color Red Mold 6 Curve – Two Color Green Mold

E F K H P

ON

Code Actuator Marking B Blank D OFF

Code Terminal Type inches (mm) F 0.250 (6.3) QC T 0.250 (6.3) Solder Tag

F B

O I O — OFF ON l O lI ON

Series

E

OFF

CR

E

Code E Y B R W C

Housing Color Charcoal Grey Grey Black Red White Brown

Code N L E F G H

Code Y B G R A W S

Actuator Color Grey Black Green Red Amber White Translucent Red

Code Body Type inches (mm)

C E

Specifications subject to change without notice.

B N Lighted Non-Lighted Lighted (Bulb 125VAC) Lighted (Bulb 250VAC) Lighted 5VDC Incandescent Lighted 6VDC Incandescent Lighted 12VDC Incandescent

E

0.476 (12.10) Non-Washable

F

0.528 (13.41) Non-Washable

G

0.543 (13.79) Non-Washable

W

0.543 (13.79) Washable Conforms to IP42

Brown Charcoal Grey

59

MINIATURE ROCKER SWITCH

SR Series Features ●

10 or 20 amp switching in a miniature package



Single-throw and double-throw options



Choice of actuator and housing color



Variety of terminals available



Industry-standard mounting dimensions



Mechanical life: min. 100,000 operations

Crisp detent actuation Steel alloy spring

Nylon button with attractive matte finish

Self-locking tolerance compensation ribs for tight fit

Durable silver alloy contacts for long life at heavy loads

Standard terminals .187″ (4.8mm) wide x .031″ (0.8mm) thick (other sizes and types available)

Electrical Ratings Switch Series

EN61058 Rating

UL1054 Rating

SR

10(4)A, 250V~, µT85

10A, 125VAC; 6A, 250VAC

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC 0.020 ohms max -20°C to +85°C

Materials

Actuator: Case: Spring: Contacts: Movable Arm: Terminals:

Nylon 66 94V-2 Nylon 66 94V-2 Steel Wire Silver or Copper Alloy Silver-Plated Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

Code B

0.378 (9.60)

0.748 (19.00)

0.079 (2.00)

0.209 (5.30)

0.539 (13.70)

0.031 (0.80)

X 0.047 (1.20)

Z = Panel Thickness

Code D

0.280 (7.10)

0.819 (20.80)

0.472 (12.00)

Y

Code C

0.689 (17.50)

0.130 (3.30 [REF])

Terminals

0.591 (15.00 ±0.10)

0.827 (21.00)

0.031 (0.80) 0.276 (7.00)

ø0.063 (ø1.60)

0.187 (4.8)

0.276 (7.00)

0.677 (17.20)

0.480 (12.20)

0.732 (18.60)

0.508 (12.90)

Recommended Panel Cut-Out Dimensions

Code E

2.700 (0.11)

inches (mm) 0.031 (0.80)

Dim. Z

0.030 to 0.049 (0.75 to 1.25) 0.049 to 0.079 (1.25 to 2.00) 0.079 to 0.118 (2.00 to 3.00)

0.472 (12.00)

Dim. X

Dim. Y

0.752 (19.10) 0.760 (19.30) 0.775 (19.76)

0.508 (12.90) 0.508 (12.90) 0.508 (12.90)

Examples of Common Part Numbers and Descriptions inches (mm) Part Number

Circuitry

Actuator/ Housing Color

Switch Function

Terminal Type

SRB22A2FBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

SRB22A2BBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

SRB22A2DBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

SRB23A2BBBNN

On – On

0.187 (4.8) Quick-Connect

Black/Black

SRB24A2HBBNN

On – Off – On

0.187 (4.8) Quick-Connect

Black/Black

Legend Marking

Boot #0015-0644

Ordering Information SR Series

B

2

4

Code Circuitry 2 Single-Pole

D

ON

Code Actuator Marking B Blank C HI

Terminal Type inches (mm) 0.187 (4.8) QC PC Thru-Hole Left Angle PC Thru-Hole Straight PC Thru-Hole Right Angle 0.346 x 0.189 (8.79 x 4.80) Solder Tag

Code Actuator Type 2 Curve

OFF

Specifications subject to change without notice.

Code A B C E P

Switch Function On – Off On – On On – Off – On (On) – Off

H B

LO

Code Contact Rating B 10A, 125VAC 6A, 250VAC (UL, CSA) 10(4)A, 250V~, µT85 (VDE) J 20A, 125VAC (UL, cUL)

Code 2 3 4 5

A 2

E F G H

O O

I — • ll

l

O

B N

Code B W Y C

Housing Color Black White Grey Brown

Code B R W Y C

Actuator Color Black Red White Grey Brown

N

Code Lighted N Non-Lighted Code Splashproof N No Rocker Boot S Waterproof Boot

61

MINIATURE ROCKER SWITCH

LR Series Features ●

Single-pole and double-pole configurations



Lighted and non-lighted options



Available in a wide variety of colors



High current switching in a compact package



Variety of terminal styles available



Self-locking tabs to fit industrystandard panel cut-outs



Mechanical life: min. 100,000 operations

Crisp detent activation Nylon button with attractive matte finish (non-lighted versions) Self-locking tolerance compensation ribs for tight fit

Durable silver alloy contacts for long life at heavy loads Rugged press-fit terminals .187″ (4.8mm) wide x .031″ (0.8mm) thick to mate with standard Quick-Connect connectors or PC terminals

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

LR

10(4)A, 250V~, T125/55

10A, 125VAC; 8A, 250VAC; 1/4HP, 125/250VAC

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC 0.020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Case: Contacts: Movable Arm: Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Silver Alloy Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

0.591 (15.00)

Code L

0.405 (10.29) Z 0.988 (25.10)

0.728 (18.50)

0.185 (4.70)

Code G

0.386 (9.80)

0.256 (6.50)

0.197 (5.00) 0.157 (3.99)

0.205 (5.21)

Z = Panel Thickness

Recommended Panel Cut-Out Dimensions

1.031 (0.80)

0.187 (4.8)

X

0.598 (15.20)

Code M

0.090 (2.29)

Y

Terminals

0.090 (2.29)

0.685 (17.40)

0.030 (0.76)

0.118 (3.00)

0.827 (21.00)

inches (mm)

0.032 (0.80) 0.050 (1.27) 0.059 (1.50)

Dim. Z 0.236 (6.00) 0.354 (9.00)

0.315 (8.00)

0.496 (12.60)

0.496 (12.60)

0.030 to 0.049 (0.75 to 1.25) 0.049 to 0.079 (1.25 to 2.00) 0.079 to 0.118 (2.00 to 3.00)

Dim. X

Dim. Y

0.752 (19.10) 0.760 (19.30) 0.775 (19.69)

0.508 (12.90) 0.508 (12.90) 0.508 (12.90)

Examples of Common Part Numbers and Descriptions inches (mm) Part Number

Circuitry

Actuator/ Housing Color

Switch Function

Terminal Type

LRA22H2FBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

LRA32H2FBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

LRA22H2BBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

LRA32H2BBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/Black

On – Off/Lighted

0.187 (4.8) Quick-Connect

Red/Black

On – Off/Lighted

0.187 (4.8) Quick-Connect

Red/Black

LRA22H2BBRLN

2

1 3

LRA32H2BBRLN

2

1

4

3

Legend Marking

Boot #0015-0644

Ordering Information LR Series

A

2 Code Circuitry 2 Single-Pole 3 Double-Pole

2

F B

Code Switch Function 2 On – Off

Code Actuator Type 2 Curve

Code H L M G

Code Actuator Marking B Blank D

Terminal Type inches (mm) 0.187 (4.8) QC PC Thru-Hole Right Angle PC Thru-Hole Straight Flat Bezel; 0.240 (6.10) QC Terminal Spacing

E F G

ON

Specifications subject to change without notice.

H

OFF

Code Contact Rating A 10A, 125VAC; 8A, 250VAC; 1/4HP, 125/250VAC (UL) 12A, 125VAC; 10A, 250VAC; 1/4HP, 125/250VAC (CSA) 10(4)A 250 V~, T125/55 (VDE)

2

O O

I – •

B N

Code E B W Y C

Housing Color Charcoal Grey Black White Grey Brown

Code E B G A R W Y S C

Actuator Color Charcoal Grey Black Green Amber Red White Grey Translucent Red Brown

N

Code Lighted N Non-Lighted L Lighted (Bulb 125VAC) E Lighted (Bulb 250VAC) F Lighted 5VDC Incandescent G Lighted 6VDC Incandescent H Lighted 12VDC Incandescent Code Splashproof N No Rocker Boot S Rocker Boot

63

THIN POWER ROCKER SWITCH

TR Series Features ●

16A switching in 11mm wide package



Lighted and non-lighted versions



Available in a wide variety of colors



Double-throw and three-position versions available



Fits industry-standard cut-outs



Mechanical life: min. 50,000 operations

Self-locking tolerance compensation ribs for tight fit

Crisp detent actuation

Nylon button with attractive matte finish (non-lighted versions)

Steel alloy spring

Open contact gap >3mm Durable silver alloy contacts for up to 16 amp switching

Standard terminals .250″ (6.3mm) wide x .031″ (0.8mm) thick

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

TR

16(4)A, 250V~, T85 1E4

16A, 125/250VAC, 1/4HP@125V; 3/4HP@250V

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC 0.020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Case: Spring: Contacts: Movable Arm: Fixed Contact Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Steel Wire Silver Alloy Silver-Plated Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

Y

1.260 (32.00) 1.157 (29.40) 0.260 (6.60)

0.547 (13.90)

X

0.787 (20.00)

Z = Panel Thickness

Recommended Panel Cut-Out Dimensions 0.413 (10.50)

0.039 (1.00)

inches (mm) Dim. Z

0.433 (11.00)

0.433 (11.00) 1.063 (27.00)

0.030 to 0.049 (0.75 to 1.25) 0.049 to 0.079 (1.25 to 2.00) 0.079 to 0.118 (2.00 to 3.00)

0.250 (6.3) 0.429 (10.9)

ø0.067 (ø1.70)

Dim. X

Dim. Y

1.19 (30.23) 1.20 (30.48) 1.21 (30.73)

0.433 (11.00) 0.433 (11.00) 0.433 (11.00)

Examples of Common Part Numbers and Descriptions inches (mm) Part Number

Circuitry

Actuator/ Housing Color

Switch Function

Terminal Type

TRG22F2FBBNN

On – Off

0.250 (6.3) Quick-Connect

Black/Black

TRG23F2BBBNN

On – On

0.250 (6.3) Quick-Connect

Black/Black

TRG22F2BBRLN

On – Off/Lighted

0.250 (6.3) Quick-Connect

Red/Black

Legend Marking

Boot #0015-0662

Ordering Information TR Series

G

2 Code Circuitry 2 Single-Pole

Switch Function On – Off On – On On – Off – On (On) – Off (On) – On (On) – Off – (On) (On) – Off – On

Code Actuator Type 2 Curve 5 Flat Code Actuator Marking B Blank C D

ON

Specifications subject to change without notice.

F B

OFF

Code Terminal Type inches (mm) F 0.250 (6.3) QC

2

HI

Code 2 3 4 5 6 7 8

F

LO

Code Contact Rating G 16A, 125/250VAC; 1/4HP@125V 3/4HP@250V (UL) 16A, 125/250VAC; 1/4HP@125/250VAC (CSA) 16(4)A, 250V~ (VDE)

2

E F G H

O O

I — • ll

l

O

B N

Code E Y B W C

Housing Color Charcoal Grey Grey Black White Brown

Code Y B G A R W C E

Actuator Color Grey Black Green Amber Red White Brown Charcoal Grey

Code N L E F G H

N Lighted Non-Lighted Lighted (Bulb 125VAC) Lighted (Bulb 250VAC) Lighted 5VDC Incandescent Lighted 6VDC Incandescent Lighted 12VDC Incandescent

Code Splashproof N No Rocker Boot S Rocker Boot

65

DOUBLE-POLE POWER ROCKER SWITCH

WR Series Features ●

Rugged construction for 2-pole, high-current applications



Lighted and non-lighted



Maintained-action and momentary



Single-throw and double-throw



Available in a variety of colors



Mechanical life: min. 50,000 operations

Nylon button with attractive matte finish (non-lighted versions) Crisp detent actuation

Self-locking tolerance compensation ribs for tight fit

Steel alloy spring

Durable silver alloy contacts for up to 16 amp switching Standard terminals .250″ (6.3mm) wide x .031″ (0.8mm) thick

Open contact gap > 3mm

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

WR

16(4)A, 250V~, T125 1E4

16A, 125/250VAC; 1/4HP@125V: 3/4HP@250V

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Rating:

1000VAC for 1 minute 108 ohms min at 500VDC 0.020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Case: Spring: Contacts: Movable Arm: Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Steel Wire Silver Alloy Silver-Plated Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

0.144 (3.65 [REF])

0.984 (25.00) 0.846 (21.50) 0.748 (19.00)

1.260 (32.00)

Y

Flared tabs on two- position versions

0.752 (19.00)

Z = Panel Thickness

Recommended Panel Cut-Out Dimensions

0.396 (10.00)

0.380 (9.30

0.112 (0.50)

0.081 (2.00)

X

inches (mm) 67 .0 0) ø0 1.7 ø (

0.031 (0.80) 0.437 0.437 (11.10) (11.10) 1.063 (27.00)

Dim. Z 0.250 (6.3)

0.030 to 0.049 (0.75 to 1.25) 0.049 to 0.079 (1.25 to 2.00) 0.079 to 0.118 (2.00 to 3.00)

0.425 (10.80)

1.142 (29.00)

Dim. X

Dim. Y

1.180 (30.00) 1.190 (30.25) 1.200 (30.48)

0.867 (22.02) 0.867 (22.02) 0.867 (22.02)

Examples of Common Part Numbers and Descriptions inches (mm) Part Number

Circuitry

Actuator/ Housing Color

Switch Function

Terminal Type

WRG32F2FBBNN

On – Off

0.250 (6.3) Quick-Connect

Black/Black

WRG34F2HBBNN

On – Off – On

0.250 (6.3) Quick-Connect

Black/Black

WRG32F2BBRLN

On – Off/Lighted

0.250 (6.3) Quick-Connect

Red/Black

Legend Marking

Boot #0015-0646

Ordering Information WR Series

G

3

2

Code Circuitry 2 Single-Pole 3 Double-Pole

Actuator Type Curve Flat Actuator Curve – Dual Actuator

D

ON

Code Actuator Marking B Blank C HI

Specifications subject to change without notice.

Terminal Type inches (mm) 0.187 (4.8) QC 0.250 (6.3) QC 0.250 (6.3) M3 Tapped Screw 0.250 (6.3) Solder Tag

Code 2 5 7

F B

OFF

Code A F S T

Switch Function On – Off On – On On – Off – On (On) – Off (On) – On (On) – Off – (On) (On) – Off – On

2

LO

Code Contact Rating G 16A, 125/250VAC: 1/4HP@125V: 3/4HP@250V (UL) 16A, 125/250VAC: 1/4HP@125/250VAC (CSA) 16(4)A, 250V~, T125 1E4 (VDE)

Code 2 3 4 5 6 7 8

F

E F G H

O O

I — • ll

l

O

B N

Code E Y B W C

Housing Color Charcoal Grey Grey Black White Brown

Code Y B G A R W

Actuator Color Grey Black Green Amber Red White

C E

Brown Charcoal Grey

Code N L E F G H

N Lighted Non-Lighted Lighted (Bulb 125VAC) Lighted (Bulb 250VAC) Lighted 5VDC Incandescent Lighted 6VDC Incandescent Lighted 12VDC Incandescent

Code Splashproof N No Rocker Boot S Rocker Boot

67

COMPACT ROCKER SWITCH

GR Series Features ●

Economical 15 amp switching



Lighted and non-lighted versions



Available in a wide variety of colors



Single- and double-throw options



Optional wire leads available



Mechanical life: min. 50,000 operations

Nylon button with attractive matte finish Steel alloy spring

Self-locking tolerance compensation ribs for tight fit

Crisp detent activation

Silver-plated copper alloy contact plate for long life at heavy loads

Rugged press-fit terminals .250″ (6.3mm) wide x .031″ (0.8mm) thick to fit standard quick-connect connectors

Electrical Ratings Switch Series

EN61058 Rating

UL1054 Rating

GR

N/A

15A, 125VAC; 10A, 250VAC

Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

N/A

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC .020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Housing: Base: Spring: Contact Plate: Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Nylon 66 94V-2 Steel Wire Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm)

0.190 (4.83)

1.250 (31.75) 1.118 (28.40)

0.630 (16.00) 0.531 (13.49) 0.413 (10.49)

Y

X

0.878 (22.30)

Z = Panel Thickness CHERRY GR SERIES 15A 125VAC 10A 250VAC 1

2

Recommended Panel Cut-Out Dimensions

3

0.374 (9.50)

inches (mm) Dim. Z

ø0.118 (ø3.00)

0.030 to 0.049 (0.76 to 1.25) 0.049 to 0.079 (1.25 to 2.01) 0.079 to 0.118 (2.01 to 3.00)

0.250 (6.3) 0.488 (12.40)

0.250 (6.3) 0.898 (22.81)

Dim. X

Dim. Y

1.120 (28.45) 1.130 (28.70) 1.150 (29.21)

0.535 (13.59) 0.535 (13.59) 0.535 (13.59)

Examples of Common Part Numbers and Descriptions inches (mm) Switch Function

Terminal Type

Actuator/ Housing Color

GRF22N2BBBNN

On – Off

0.250 (6.3) Quick-Connect

Black/ Black

GRF22N2FBBNN

On – Off

0.250 (6.3) Quick-Connect

Black/ Black

GRF23N2BBBNN

On – On

0.250 (6.3) Quick-Connect

Black/ Black

GRF22N2BBRLN

On – Off/Lighted

0.250 (6.3) Quick-Connect

Red/ Black

Part Number

Circuitry

Legend Marking

Ordering Information GR Series

F

2 Code Circuitry 2 Single-Pole

2 Code Switch Function 2 On – Off 3 On – On

E F K

ON

D

HI

Code Actuator Marking B Blank C OFF

Code Terminal Type inches (mm) N 0.250 (6.3) QC, Straight W Wire Lead 16 AWG, UL 1015, 6″ Long, White

F B

Code Actuator Type 2 Curve

LO

Code Contact Rating 15A, 125VAC (UL, CSA) F 10A, 250VAC (UL, CSA)

N 2

O I O — OFF ON

Housing Color Black White Grey Brown

Code B G A R Y C M

Actuator Color Black Green Amber Red Grey Brown Yellow

W

Specifications subject to change without notice.

B N

Code B W Y C

Code N L E G H

N Lighted Non-Lighted Lighted (Bulb 125VAC) Lighted (Bulb 250VAC) Lighted 6VDC Incandescent Lighted 12VDC Incandescent

Code Body Type N

No Splashproof Rocker Boot

White

69

ROUND ROCKER SWITCH

RR Series Features ●

Single-pole and double-pole configurations



Lighted and non-lighted options



Available in a wide variety of colors



High current switching in a compact round package



Self-locking tabs to fit industrystandard panel cut-outs



Mechanical life: min. 100,000 operations

Crisp detent activation Round nylon button with attractive matte finish (non-lighted versions) Self-locking tolerance compensation ribs for tight fit

Durable silver alloy contacts for long life at heavy loads Rugged press-fit terminals .187″ (4.8mm) wide x .031″ (0.8mm) thick to mate with standard Quick-Connect connectors

Electrical Ratings Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations)

Switch Series

EN61058 Rating

UL1054 Rating

RR

10(4)A, 250V~, µ T125/55

10A, 125VAC; 8A, 250VAC, 1/4 HP; 125/250VAC

10,000

Specifications Electrical

Dielectric Strength: Insulation Resistance: Initial Contact Resistance: Temperature Range:

1000VAC for 1 minute 108 ohms min at 500VDC .020 ohms max -20°C to +85°C

Materials

Actuator (non-lighted): Actuator (lighted): Base: Contacts: Movable Arm: Terminals:

Nylon 66 94V-2 Polycarbonate Nylon 66 94V-2 Silver Alloy Copper Alloy Tin-Plated Copper Alloy

6,000

®

Dimensions inches (mm) Panel Cut-Out Dimensions for Panel Thickness inches (mm) 0.039 to 0.078 (1.0 to 2.0) 0.094 (2.40)

0.079 (2.00)

Ø.677 (Ø17.20)

0.030 (0.76)

0.976 (24.80)

C H E R RY R R S E R I E S 1 0 A 1 2 5 VAC 1/4 HP 8 A 2 5 0 VAC 1 2 A 1 2 5 VAC 1/4 HP 1 0 A 2 5 0 VAC

0.256 ( 6.50) Ø.091 (Ø2.30)

0.827 (21.00) 0.031 (0.80)

0.187 (4.8)

0.197 (5.00) 0.315 (8.00) 0.504 (12.80) 0.783 (19.90)

0.205 (5.20)

0.157 (4.00)

7 0.7800) (20.

0.059 (1.50)

0.717 (18.20)

0.276 (7.00)

0.138 (3.50)

0.906 (23.00) 0.685 (17.40)

0.841 (21.36)

Examples of Common Part Numbers and Descriptions inches (mm) Switch Function

Terminal Type

Actuator/ Housing Color

RRA22H3BBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/ Black

RRA32H3FBBNN

On – Off

0.187 (4.8) Quick-Connect

Black/ Black

RRA22H3BWWNN

On – Off

0.187 (4.8) Quick-Connect

White/ White

RRA22H3FBRNN

On – Off

0.187 (4.8) Quick-Connect

Red/ Black

On – Off/Lighted

0.187 (4.8) Quick-Connect

Red/ Black

On – Off/Lighted

0.187 (4.8) Quick-Connect

Red/ Black

Part Number

Circuitry

RRA22H3BBRLN

2

1 3

RRA32H3BBRLN

2

1

4

3

Legend Marking

Ordering Information RR Series

A

2 Code Circuitry 2 Single-Pole 3 Double-Pole

3

F B

Code Switch Function 2 On – Off

Code Actuator Type 3 Round

Code H L M

Code Actuator Marking B Blank D

Terminal Type inches (mm) 0.187 (4.8) QC PC Thru-Hole Right Angle PC Thru-Hole Straight

E F G

ON

Specifications subject to change without notice.

H

OFF

Code Contact Rating A 10A, 125VAC; 8A, 250VAC; 1/4HP, 125/250VAC (UL) 12A, 125VAC; 10A, 250VAC; 1/4HP, 125/250VAC (CSA) 10(4)A, 250V~, µT125/55 (VDE)

2

O O

I – •

B N

Code B W Y C E

Housing Color Black White Grey Brown Charcoal Grey

Code B G A R W Y C E

Actuator Color Black Green Amber Red White Grey Brown Charcoal Grey

N

Code Lighted N Non-Lighted L Lighted (Bulb 125VAC) E Lighted (Bulb 250VAC) G Lighted 6VDC Incandescent H Lighted 12VDC Incandescent Code Body Type N No Splashproof Rocker Boot

71

SELECTOR SWITCHES

DESKTOP AND NOTEBOOK PROFILE

Pushwheel

Keyswitches

PUSHWHEEL SELECTOR SWITCH

LOW NOTEBOOK PROFILE

PA Series

ML Series

Features

Features



● ● ●



Very small dimensions: 0.3 x 0.6 x 0.7″ (7.62 x 15 x 18mm); Mounting depth: 0.9″ (24mm) or 1.4″ (34.5mm) 10 or 16 switching positions Front Mounting Integrated pins for module mounting Integrated snap-in endcaps



● ● ● ●



Black housing Extended PCB available for mounting additional components Connection using QC terminal or solder pins

● ●



PUSHWHEEL SELECTOR SWITCH

DESKTOP PROFILE

PE Series

MX Series

Features

Features





● ●



Dimensions: 0.3 x 0.9 x 1.0″ (7.62 x 24 x 26mm); Mounting depth: 1.3″ (32mm) or 1.7″ (42mm) Standard selector switch with 10 or 16 switching positions Front mounting Integrated pins for module mounting Integrated snap-in endcaps





● ●



Black housing Extended PCB available for mounting additional components Connection using QC terminal or solder pins

● ●

● ● ●

PUSHWHEEL SELECTOR SWITCH



PB Series



Features ●

● ● ● ●

72

0.272″ (6.9mm) from PCB (no keycap) 3mm travel Long life: 20 million operations minimum 12V maximum AC/DC Current rating: 100µA min., 10µA max. Insulation Resistance: