Syllabus - Department of Chemical Engineering

77 downloads 3543 Views 105KB Size Report
R.M. Felder & R.W. Rousseau, Elementary Principles of Chemical Processes,. 3rd ed., John ... Screencasts and Conceptests for Chemical Engineering Courses .
ChE10: Introduction to Chemical Engineering Lecture:



Recitations:

1:00-1:50 PM, M/W/F, Psych 1924 Monday (A) or Wednesday (B) 2:00-2:50 PM, ESB 1003

Course Personnel: Instructor

Prof. Matthew Helgeson Office: 3337 Engineering II Email: [email protected] Office hours: Tuesday, 4-5pm

Recitation Leader

Alejandro Parra Office: 1161 Engineering II Email: [email protected] Office hours: Friday, 2:00-2:50 PM, ESB 1003

Teaching Assistants

Martin Keh Office: 3235 Engineering II Email: [email protected] Office hours: Thursday, TBD

Alan Derk Office: 3307 Engineering II Email: [email protected] Office hours: Wednesday,TBD

Course materials Textbook

R.M. Felder & R.W. Rousseau, Elementary Principles of Chemical Processes, 3rd ed., John Wiley & Sons, 2005.

Other references

Perry’s Chemical Engineers’ Handbook, 8th Ed., McGraw-Hill, 2008. Screencasts and Conceptests for Chemical Engineering Courses http://www.learncheme.com/

Course website

http://chemengr.ucsb.edu/~ceweb/courses/che10/

Course objectives This course will introduce you to the basic calculations and problem solving skills required in chemical engineering analysis. Topics to be covered include rudimentary engineering calculations and data analysis, mass and energy balances, chemical reactions, elementary thermodynamics, and phase equilibria associated with chemical engineering processes and unit operations.

Course requirements and policies Homeworks (8 total)

Homeworks are due at the beginning of class one week after they are assigned (typically Friday). Late homeworks will be reviewed, but will receive a grade of zero unless approved in advance and in writing by the instructor. Students are encouraged to work on homework in groups. However, the work you turn in must be your own (see below).

Midterm exams

The two midterm exams will be administered in class, and will cover all course material up to and including the homework immediately preceding the exam.

Term paper

In teams of three students each, you will develop a term paper devoted to a current social, environmental, technological, or economic issue in which chemical engineers have a significant impact. This paper will be on a problem or topic of your choosing, but must include elements pertaining to mass and/or energy balances. The paper is due on the second to last day of class, with several milestones throughout the course to distribute the workload across the quarter.

Final exam

The final exam will be a three-hour exam administered during the finals period, and will cover all of the material presented in the course.

Exam policies

All exams will be closed book and closed notes, although you will be allowed one handwritten sheet of paper (front and back) with notes or you feel are important. You may use a scientific calculator, but not a graphing calculator.

Grading

Problem sets Recitation problems Midterm exam 1 Midterm exam 2 Term paper Final exam

Academic conduct

Plagiarism of any kind is unethical and unacceptable. This includes (but is not limited to): copying from other students’ work, using a solutions manual, or using information or ideas from published work without proper citation. Any violations of this policy will result in a zero on the assignment in question without exception.

25% 5% 15% 15% 10% 30%

Cheating on exams will not be tolerated, and will result in an F for the course and immediate referral to the campus board of Academic Conduct. For more details, see the College of Engineering Policy on Academic Conduct.

Lecture schedule Lecture

Date

Topics

Reading

1

F 9/28

Introduction – What do chemical engineers do?

Ch. 1

2

M 10/1

Units, dimensionality, and significant figures

Ch. 2.1-2.5b, 2.6

3

W 10/3

Process variables and measurements

Ch. 3

4

F 10/5 (HW 1 due)

Dealing with data – uncertainty, regression, linearization

Ch. 2.5c-2.7

5

M 10/8

The general balance eqn., overall and component balances

Ch. 4.2

6

W 10/10

Types of chemical processes and process flowcharts

Ch. 4.1, 4.3a

7

F 10/12 (HW 2 due)

Single unit processes without reaction

Ch. 4.3b,c

8

M 10/15

Degree of freedom analysis and general procedures

Ch. 4.3d,e

9

W 10/17

Multi-unit processes without reaction, recycle and bypass

Ch. 4.4, 4.5

10

F 10/19 (HW 3 due)

Multi-unit processes, linear algebra

Handout

11

M 10/22

Chemical reaction – stoichiometry, conversion, and equilibrium

Ch. 4.6a-c

12

W 10/24

Multiple reactions – yield, selectivity, and fraction conversion

Ch. 4.6d

13

F 10/26 (HW 4 due)

Material balances with reaction – species balances

Ch. 4.7a-d

14

M 10/29

Review (Both lecture and recitation, Room TBD)

EXAM

W 10/31

MIDTERM EXAM 1

15

F 11/2

Present topics for Term Paper to class

16

M 11/5

Combustion reactions

Ch. 4.8

17

W 11/7

Single-phase thermodynamics – ideal gases

Ch. 5.1, 5.2

18

F 11/9 (HW 5 due)

Single phase, multi-component systems

Ch. 5.3, 5.4

--

M 11/12

VETERAN’S DAY – No lecture

19

W 11/14

Multi-phase, single component systems

Ch. 6.1-6.3

20

F 11/16 (HW 6 due)

Multi-component systems – vapor-liquid equilibrium

Ch. 6.4

M 11/19

MIDTERM EXAM 2

21

W 11/21 (Draft due)

Multi-component systems – liquid-liquid equilibrium

--

F 11/23

THANKSGIVING – No lecture

22

M 11/26

Multi-component systems – liquid-solid and vapor-solid eqbrm.

Ch. 6.5, 6.7

23

W 11/28

Energy and the first law of thermodynamics

Ch. 7.1, 7.2

24

F 11/30 (HW 7 due)

Energy balances on batch processes – enthalpy and work

Ch. 7.3, 7.4a,b

25

M 12/3

Energy balances on non-reactive processes, part I

Ch. 7.4

26

W 12/5 (Paper due)

Energy balances on non-reactive processes, part II

Ch. 7.5

27

F 12/7 (HW 8 due)

Review

W 10/12, 4-7pm

FINAL EXAM

EXAM

EXAM

Ch. 1 – 4.

Ch. 6.6

Recitation schedule Week

Date

Topics

Session leader

1

F 9/28 or W 10/3

Engineering references and literature searches

Chuck Huber

2

M 10/8 or W 10/10

Spreadsheets, plotting, and regression

Parra

3

M 10/15 or W 10/17

Technical writing, Part 1 – Form and organization

Helgeson

4

M 10/22 or W 10/24

Mathematics, solving multi-unit/component balances

Parra

5

M 10/29

Work review problems for Midterm 1 (Room TBD)

Parra

6

M 11/5 or W 11/7

Technical writing, Part 2 – Style and presentation

Helgeson

7

W 11/14 or F 11/16

Work review problems for Midterm 2

Parra

8

M 11/19 or W 11/21

Office hours

Parra

9

M 11/26 or W 11/28

Energy balances, steam tables and thermodynamic cycles

Parra

10

M 12/3 or W 12/5

Work review problems for Final Exam

Parra