This guide describes how to configure and operate the Shrew Soft ...

21 downloads 99 Views 380KB Size Report
29-03-2010. This guide describes how to configure and operate the Shrew Soft VPN Client with an open source VPN Gateway. System Requirements.
This guide describes how to configure and operate the Shrew Soft VPN Client with an open source VPN Gateway System Requirements This software package should install on any reasonable machine running a 32 or 64 bit version of Windows 2000, XP,Vista or Windows 7. Testing has only been performed on machines running with the latest service packs installed. For this reason, you are encouraged to keep your operating system up to date when using this software. An account with administrative privileges will be required to run the install application but not for normal operation.

Download from www.shrew.net the vpn client for windows.

29-03-2010

1. Choose an option "Run" or "Save" (Save)

2. Downloading the VPN Client for Windows 2K/XP/Vista/7

4. Click "Next"

5. Click "I Agree" to accept the terms of the agreement

6. Click "Next" 3.Double Click to start the Setup

29-03-2010

7. Click "Next" 11. Open from Start/program files/shrewsoft VPN Client / Access Manager

8. Installation is in progess 12. At this point you can import the previous VPN profile “ TUDelft.pcf file “ or you can configure a new profile. In this example is choosen for a New profile Click “Add”

9. Click "Install"

10.Click “Finish”

29-03-2010

13. Select and fill out the settings

14. Fill out and Click “Save”

17. Fill out the username and password of your NetID and Click “Connect”

15. Fill out Pre Shared Key < wireless > and Click “Save” 18. Establishing Connection

16. Double Click to open VPN Client 19. Connection is established

29-03-2010