Where hydraulic pressure is available this can be used to move the nozzle. Where electric remote control is required a s
Titan FJ/FJH 5000 Titan Monitor Nozzle z Adjustable from straight jet to
fog pattern
z Nominal flow 5,000 l/min
@ 7 bar
The Angus FJ 5000 bronze fog/jet nozzle is a simple and reliable design fitted with a rotating sleeve which allows the water or foam stream to be adjusted manually from straight jet to wide fog pattern. The outer sleeve is fitted with brass handles to allow easy adjustment when wearing gloves or operating under difficult conditions. Nozzle materials Bronze body to EN CC491K, equivalent to LG2, Red Brass, ASTM B62 and UNI 7013-8 Copper Zinc Lead
Remote control operation The FJH 5000 nozzle is available with a hydraulic cylinder for remote operation. Where hydraulic pressure is available this can be used to move the nozzle. Where electric remote control is required a solenoid valve (rated EExd IIB T3) can be used to allow water under pressure from the monitor inlet to control the nozzle.
1090024
Weights 150 x 150 flange
Manual Hydraulic 11.5 kg 17.5 kg
Hydraulic connections ¼” BSP F inlet and outlet Remote control manual override A lever attached to the hydraulic cylinder allows the nozzle to be moved manually if hydraulic power fails. A bypass valve sited in the hydraulic circuit allows fluid to re-circulate when in manual mode.
Tin
85% 5% 5% 5%
By pass valve
Handles: brass Seals Viton seals rated up to 120°C Water inlet connection 150 x 150 square flange with “O” ring seal
290 ~
K factor 1890 (Flow l/min = K x √Pressure bar) Design pressure Maximum working pressure 16 bar Factory test pressure 24 bar FOG JET
6250
500 375
2500 2
3
4
5
6
7 8 9 10
OPERATING PRESSURE (bar)
231
250 183 200
REACTION (kg)
2000
Ø150x150
3000
215 ~
FULL JET
5000 4500 4000 210
FLOW RATE (l/min)
400 ~
Ø1/4" BSP F. (OIL)
216
150 125 100 75
2
3
4
5
6
7 8 9 10
OPERATING PRESSURE (bar)
TH
10 6 3 4 5 PRESSURE (bar)
Titan FJ/FJH 5000
60
50
Titan Monitor Nozzle
THROW (m)
THROW (m)
30 20 10 6 3 4 5 PRESSURE (bar)
50
60
THROW (m)
THROW (m)
30 20 10 6 3 4 5 PRESSURE (bar)
7
8
7
8
7
8
9
7
8
9
NARROW FOG 30
30 20 6 3 4 5 PRESSURE (bar)
100 90
NARROW FOG 30
50
80
40
70
30 20
9
9
40
9
THROW (m)
WIDE FOG 60
40
8
50
WIDE FOG 60
40
7
6 3 4 5 PRESSURE (bar)
7
8
9
FULL JET
60 50 3 4 5 6 PRESSURE (bar)
100 60
NARROW FOG 30
Length and height of nozzle jet
20
80
7
8
9
Surface preparation
Solvent cleaning
Primer coat
Epoxy 30μm
Intermediate coat
Epoxy grey 40μm
Finish coat
Polyurethane 40μm Red RAL3000
Total dry film thickness 110μm
500
2500
375
70 3
2 60
4
5
6
7 8 9 10
OPERATING PRESSURE (bar)
50 32
45
60
0
3 75 4 5 6 25 50(bar) PRESSURE LENGTH OF JET IN %
7 75
8
9
100%
For throw and height calculations at different angles refer to the chart above or the Angus Interactive Electronic Throw Program.
REACTION (kg)
HEIGHT OF JET IN %
50 3 4 5 6 PRESSURE (bar)
50
0
250 200 150 125 100 75
2
3
4
5
6
7 8 9 10
OPERATING PRESSURE (bar)
Monitors The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 50,000 l/min.
Fog/Jet Nozzles Angus fog/jet nozzles cover the range 200 to 20,000 l/min with self inducing options up to 4,000 l/min.
Cannons Angus foam cannons cover the range 800 to 15,000 l/min with a self inducing option and foam spreaders on all models.
Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control. All are suitable for use where explosive atmospheres may be present.
Most models are available with hydraulic or electric remote control options suitable for use in explosive rated areas.
Angus is a company assessed to ISO 9001:2008.
Monitors RHEMB 50
GMS 30
REMS 200
Specialist nozzles for dry powder are also available – refer to Angus. Fog/Jet Nozzles
Cannons
RHEMB 85
LMB 30 REMS 80
9 bar 2.5m 3.0m
CROSS REFERENCE IN % BETWEEN JET HEIGHT AND LENGTH
3000
25
7 bar 2.5m 3.0m
FULL JET
90
THROW (m)
FLOW RATE (l/min)
Note: The jet throw depends on a number of variables such as wind direction, of8 6 3 4type and 5 concentration 7 9 (bar) of the monitor foam in the waterPRESSURE and the condition water6250 ways 100and nozzle.
THROW (m)
THROW (m)
30
* Based on water at nozzle inlet pressure of 7.0 bar and flow 5,000 l/min.
2000
Optional Paint Finish
Spread of Fog Spray 80 5 bar 30° 70 fog jet 2.5m 60° 60 fog jet 3.0m
40 water throw 87m* at an angle Maximum to the horizontal of 32°
5000 75% 4500 4000
FULL JET
90
50
GMS 45
LMB 40 REMS 300
GMS 60
GMS 200
LMB 85
GMS 80
GMS 300
INTERNATIONAL SALES Angus Fire Ltd Angus House, Haddenham Business Park, Pegasus Way, Haddenham, Aylesbury, HP17 8LB, UK Tel: +44 (0)1844 293600 • Fax: +44 (0)1844 293664
UK SALES Angus Fire Ltd Station Road, Bentham, Lancaster, LA2 7NA, UK Tel: +44 (0)1524 264000 • Fax: +44 (0)1524 264180
Email:
[email protected] • Web: www.angusfire.co.uk
Angus Fire operates a continuous programme of product development. The right is therefore reserved to modify any specification without prior notice and Angus Fire should be contacted to ensure that the current issues of all technical data sheets are used. © Angus Fire 6451/3 02.14