Update Standards - October 2008 - BSI Shop

British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

Building and civil engineering BS 1088 ..............................................................21 BS 1129 ..............................................................21 BS 1139 ..............................................................21 BS 1196 ..............................................................21 BS 1217 ..............................................................10 BS 2037 ..............................................................21 BS 2081 ..............................................................21 BS 2482 ..............................................................21 BS 4305 ........................................................10, 27 BS 4940 ..............................................................22 BS 5080 ..............................................................22 BS 5412 ..............................................................26 BS 5606 ..............................................................21 BS 5803 ..............................................................23 BS 5950 ..............................................................23 BS 6114 ..............................................................30 BS 6270 ..............................................................23 BS 6297 ..............................................................19 BS 6463 ..............................................................23 BS 6750 ..............................................................21 BS 6911 ..............................................................30 BS 6912 ..............................................................30 BS 6913 ..............................................................30 BS 6915 ..............................................................23 BS 7533 ..............................................................24 BS 7903 ..............................................................24 BS 7997 ........................................................19, 27 BS 8008 ..............................................................20 BS 8103 ..............................................................28 BS 8420 ..............................................................25 BS 9124 ..............................................................10 DD CEN/TS 15209 ........................................19, 27 BS EN 198 ....................................................10, 27 BS EN 1090 ........................................................10 BS EN 1112 ..................................................11, 28 BS EN 1113 ..................................................11, 28 BS EN ISO 3449 ..................................................31 BS EN ISO 4157 ..................................................31 BS EN ISO 7518 ..................................................31 BS EN 13161 ......................................................12 BS EN 13904 ................................................11, 28 BS EN 13905 ................................................11, 28 BS EN 14353 ......................................................12 BS EN 14617 ......................................................12

COMING IN AUTUMN The BSI Companion Guide to the Structural Eurocodes

BS EN 14989 ......................................................12 BS EN 15096 ......................................................12 BS EN ISO 15927 ................................................33 BS EN ISO 19901 ................................................33 DD ENV 1090 .....................................................10 BS ISO 15686 .....................................................17 PD 6446 .............................................................21 PD 6533 .............................................................23 PD 6682 .............................................................23

Consumer products and services BS 684 ..........................................................12, 27 BS 4532 ..............................................................22 BS 4737 ..............................................................27 BS 7011 ..............................................................23 BS 7012 ..............................................................23 BS 7614 ..............................................................30 BS 7972 ..............................................................24 BS 8409 ..............................................................25 BS 8509 ..............................................................10 DD CEN ISO/TS 12181 ........................................18 DD CEN ISO/TS 12780 ........................................18 DD CEN ISO/TS 12781 ........................................18 DD CEN ISO/TS 14253 ........................................19 DD CEN ISO/TS 20836 ........................................33 BS EN 71 ............................................................20 BS EN 1176 ..................................................19, 20 BS EN ISO 5495 ..................................................31 BS EN ISO 7944 ..................................................31 BS EN ISO 7965 ..................................................31 BS EN ISO 8367 ..................................................31 BS EN ISO 8534 ............................................12, 27 BS EN ISO 10273 ................................................32 BS EN 12798 ......................................................12 BS EN ISO 13567 ................................................32 BS EN 14892 ......................................................12 BS EN ISO 15867 ................................................32 BS EN ISO 22000 ................................................33 BS EN 26590 ......................................................33 BS EN 26591 ......................................................33 BS EN 26599 ......................................................33 BS EN 27023 ......................................................33 BS EN 27965 ......................................................33 BS ISO 1008 .......................................................25 BS ISO 1222 .......................................................25 BS ISO 4121 .......................................................34 BS ISO 10653 .....................................................35 BS ISO 10654 .....................................................35 BS ISO 12231 .....................................................25 BS ISO 13299 .....................................................35 BS ISO 13302 .....................................................35 BS ISO 14132 .....................................................17 BS ISO 14808 .....................................................25 BS ISO 17604 .....................................................36 BS ISO 18932 .....................................................25 BS ISO 21527 .....................................................18 DD ISO/TS 16649 ................................................36 PD CEN/TR 13688 ...............................................18 PD CEN/TR 15753 ...............................................18

Electrotechnical

This guide will be available FREE to all purchasers of the Eurocodes and their National Annexes. It will include practical advice on how the new Eurocodes will work and their benefits to construction professionals.

For further information visit www.bsigroup.com/bip2159

4

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

215 ................................................................21 1363 ..............................................................10 2627 ..............................................................21 2897 ..............................................................21 3288 ..............................................................26 6469 ..............................................................23 6622 ..............................................................19 7354 ..............................................................24 7460 ..............................................................24 7520 ........................................................15, 27 7835 ..............................................................19 7870 ........................................................24, 26 7894 ..............................................................26 EN ISO 14815 ................................................32 EN 50083 ......................................................15 EN 50153 ......................................................33 EN 50264 ................................................14, 28 EN 50281 ......................................................28 EN 50311 ......................................................33 EN 50338 ......................................................28 EN 50343 ......................................................33 EN 50500 ......................................................14 EN 60079 ......................................................28

Prices may be subject to change.

BS EN 60216 ......................................................14 BS EN 60384 ................................................14, 29 BS EN 60431 ......................................................28 BS EN 60512 ......................................................15 BS EN 60519 ......................................................28 BS EN 60728 ......................................................15 BS EN 60730 ......................................................28 BS EN 60871 ......................................................28 BS EN 60901 ......................................................20 BS EN 61241 ......................................................28 BS EN 61300 ......................................................15 BS EN 61318 ................................................15, 27 BS EN 61347 ......................................................15 BS EN 61355 ......................................................15 BS EN 61810 ......................................................16 BS EN 62024 ......................................................16 BS EN 62317 ................................................16, 28 BS EN 62320 ......................................................16 BS EN 130101 ..............................................14, 29 BS EN 130102 ..............................................14, 29 BS EN 130500 ....................................................29 BS EN 130501 ....................................................29 BS ISO 19379 .....................................................36 BS IEC 61892 ......................................................18 DD IEC/TS 62395 ................................................19 PD CEN/TR 15762 ...............................................18 PD CLC/TR 50454 ...............................................18 PD IEC/TR 62510 ................................................18 BS MA 2 .............................................................25 BS QC 300101 .............................................14, 29

Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

1434 ..............................................................21 1806 ..............................................................17 2051 ........................................................25, 26 3643 ..............................................................29 4184 ..............................................................29 4235 ..............................................................29 5431 ..............................................................22 5561 ..............................................................22 5686 ..............................................................29 5892 ..............................................................23 6023 ..............................................................29 6102 ..............................................................25 6200 ..............................................................23 6753 ..............................................................23 7255 ..............................................................24 7317 ..............................................................24 7440 ..............................................................30 7471 ..............................................................30 7564 ........................................................17, 27 7568 ........................................................17, 27 7707 ..............................................................30 7708 ..............................................................30 7884 ..............................................................24 7977 ..............................................................24 EN 289 ..........................................................20 EN 378 ..........................................................10 EN ISO 898 ....................................................31 EN ISO 1127 ..................................................31 EN 2349 ........................................................11 EN 2714 ........................................................11 EN 3161 ........................................................11 EN ISO 3452 ..................................................31 EN 3545 ........................................................11 EN 3733 ........................................................11 EN ISO 3977 ..................................................25 EN 4075 ........................................................11 EN 4165 ........................................................11 EN ISO 4490 ..................................................11 EN 4631 ........................................................12 EN ISO 5778 ..................................................31 EN ISO 6042 ..................................................31 EN ISO 6115 ..................................................31 EN ISO 6185 ..................................................31 EN ISO 7225 ..................................................31 EN ISO 8099 ..................................................31 EN ISO 8861 ..................................................31 EN ISO 10426 ................................................32 EN ISO 11114 ................................................32 EN ISO 11812 ................................................32 EN ISO 11844 ................................................16 EN 12517 ......................................................12 EN ISO 12732 ................................................16 EN ISO 13090 ................................................32

Update Standards Oct 2008

British Standards - Quick Reference Guide continued... BS EN ISO 13503 ................................................32 BS EN ISO 13753 ................................................32 BS EN ISO 13849 ................................................12 BS EN ISO 13929 ................................................32 BS EN 14033 ......................................................12 BS EN 14197 ......................................................25 BS EN ISO 15329 ................................................16 BS EN ISO 15584 ................................................32 BS EN ISO 16784 ................................................16 BS EN ISO 21007 ................................................33 BS EN 26553 ......................................................33 BS EN 26554 ......................................................33 BS EN 26948 ......................................................33 BS EN 27841 ......................................................33 BS EN 27842 ......................................................33 BS EN 28848 ......................................................33 BS EN 62256 ......................................................16 BS ISO 68 .....................................................33, 34 BS ISO 261 .........................................................34 BS ISO 262 .........................................................34 BS ISO 461 ...................................................16, 29 BS ISO 965 .........................................................34 BS ISO 1940 .......................................................34 BS ISO 3057 .......................................................34 BS ISO 3058 .......................................................34 BS ISO 3601 .................................................17, 20 BS ISO 3828 .......................................................17 BS ISO 4141 .......................................................34 BS ISO 4156 .......................................................34 BS ISO 4251 .......................................................34 BS ISO 4306 .......................................................34 BS ISO 6752 .................................................17, 27 BS ISO 7141 .......................................................35 BS ISO 7588 .......................................................35 BS ISO 7867 .......................................................35 BS ISO 8705 .......................................................35 BS ISO 8843 .......................................................17 BS ISO 10069 ...............................................17, 27 BS ISO 10073 ...............................................17, 27 BS ISO 10231 .....................................................35 BS ISO 10972 .....................................................35 BS ISO 11157 .....................................................35 BS ISO 11844 .....................................................16 BS ISO 11992 .....................................................35 BS ISO 12257 .....................................................17 BS ISO 12478 .....................................................35 BS ISO 12732 .....................................................16 BS ISO 13202 .....................................................35 BS ISO 13373 .....................................................35 BS ISO 13457 .....................................................17 BS ISO 13988 .....................................................17 BS ISO 14621 .....................................................36 BS ISO 14835 .....................................................36 BS ISO 14837 .....................................................36 BS ISO 15329 .....................................................16 BS ISO 16121 .....................................................36 BS ISO 16653 .....................................................17 BS ISO 16784 .....................................................16 BS ISO 16889 .....................................................17 BS ISO 17058 .....................................................25 BS ISO 18738 .....................................................36 BS ISO 18770 .....................................................36 BS ISO 21018 .....................................................18 BS ISO 21069 .....................................................18 BS ISO 22641 .....................................................36 BS ISO 22642 .....................................................36 BS ISO 22645 .....................................................36 BS ISO 22646 .....................................................36 BS ISO 22664 .....................................................36 BS ISO 22667 .....................................................36 BS ISO 26402 .....................................................18 DD ISO/PAS 30003 ..............................................19 DD ISO/TS 13899 ................................................25 BS 4G 173 ....................................................16, 29 BS Z 10 ...............................................................36 BS MA 97 ...........................................................36 BS AU 50 ............................................................36

Health and environment BS BS BS BS BS BS

1747 2740 2741 2811 3169 3668

..............................................................29 ..............................................................26 ..............................................................27 ..............................................................27 ..............................................................27 ..............................................................21


BS 3985 ..............................................................22 BS 5446 ..............................................................22 BS 5724 ........................................................18, 27 BS 5839 ..............................................................23 BS 6068 .................................................29, 30, 33 BS 6658 ..............................................................23 BS 7505 ..............................................................24 BS 7755 ..............................................................30 BS 7867 ..............................................................25 BS 7928 ..............................................................24 BS 7944 ..............................................................25 BS 8468 ..............................................................10 BS 8502 ..............................................................25 DD 7971 .............................................................24 BS EN ISO 140 ....................................................31 BS EN 694 ..........................................................27 BS EN 737 ....................................................12, 28 BS EN 1041 ........................................................10 BS EN 1366 ........................................................11 BS EN ISO 1567 ............................................14, 28 BS EN 1733 ..................................................12, 28 BS EN 1947 ........................................................27 BS EN ISO 6874 ..................................................31 BS EN ISO 7488 ..................................................31 BS EN ISO 7998 ..................................................31 BS EN ISO 8362 ..................................................31 BS EN ISO 8836 ............................................12, 28 BS EN ISO 8871 ............................................31, 32 BS EN ISO 9170 ............................................12, 28 BS EN ISO 9687 ..................................................32 BS EN ISO 9873 ..................................................32 BS EN ISO 10534 ................................................32 BS EN 12010 ................................................14, 28 BS EN 12564 ................................................14, 28 BS EN 13220 ................................................12, 28 BS EN 13328 ......................................................14 BS EN ISO 14915 ................................................32 BS EN ISO 15002 ..........................................12, 28 BS EN 15254 ......................................................14 BS EN ISO 17294 ................................................33 BS EN ISO 18153 ................................................33 BS EN ISO 19054 ................................................33 BS EN ISO 19980 ................................................33 BS EN ISO 20126 ................................................33 BS EN ISO 20795 ..........................................14, 28 BS EN ISO 21534 ..........................................14, 28 BS EN ISO 21536 ..........................................14, 28 BS EN ISO 22254 ................................................33 BS EN ISO 22374 ................................................33 BS EN ISO 23328 ................................................14 BS EN 60601 ................................................15, 45 BS EN 80416 ......................................................33 BS ISO 5667 .......................................................34 BS ISO 6768 .......................................................34 BS ISO 11262 .....................................................35 BS ISO 15010 .....................................................36 BS ISO 17554 .....................................................36 BS ISO 17724 .....................................................36 BS ISO 23909 .....................................................18 DD ISO/TS 13473 ................................................19 PD IEC/TR 60977 ..........................................18, 27

Information systems BS 1749 ..............................................................25 BS 4505 ..............................................................26 BS 5332 ..............................................................26 BS 5477 ..............................................................26 BS 5999 ..............................................................26 BS 6313 ..............................................................23 BS 6321 ..............................................................23 BS 6529 ..............................................................26 BS 6616 ..............................................................26 BS 8426 ..............................................................25 BS EN 1332 ........................................................11 BS EN ISO 9283 ..................................................32 BS EN 50090 ......................................................14 BS EN 61784 ................................................15, 16 BS ISO/IEC 7942 .................................................35 BS ISO 11620 ...............................................17, 29 BS ISO/IEC 14478 ...............................................35 BS ISO 19005 .....................................................36 BS ISO/IEC 24754 ...............................................18 DD IEC/PAS 62443 ..............................................19 PD 0026 .............................................................25 PD ISO/IEC TR 9126 ............................................36


PD ISO/IEC TR 18037 ..........................................18 PD ISO/TR 20983 ..........................................17, 29

Management systems BS 2520 ..............................................................26 BS 2846 ..............................................................21 BS 6001 ..............................................................23 BS 8422 ..............................................................25 KIT 201 ...............................................................19 DD 8464 .............................................................25 BS EN ISO/IEC 17040 ..........................................33 BS EN ISO 9000 ..................................................32 BS EN ISO 14024 ................................................32 BS EN 15565 ......................................................14 BS EN 15838 ......................................................20 BS ISO 639 ...................................................16, 34 BS ISO 13528 .....................................................35 BS ISO 16642 .....................................................36

Materials and chemicals BS 903 ...................................................16, 18, 27 BS 1042 .................................................16, 17, 27 BS 1070 ..............................................................21 BS 1170 ..............................................................21 BS 1425 ..............................................................21 BS 1781 ..............................................................21 BS 2000 ..............................................................12 BS 2486 ..............................................................21 BS 2782 ..............................................................26 BS 2922 ..............................................................29 BS 2975 ........................................................10, 27 BS 3416 ..............................................................21 BS 3698 ..............................................................21 BS 3728 ..............................................................21 BS 3900 ........................................................12, 22 BS 4569 ..............................................................22 BS 4578 ..............................................................22 BS 4652 ..............................................................22 BS 4723 ..............................................................22 BS 4842 ..............................................................22 BS 4994 ..............................................................12 BS 5335 ..............................................................22 BS 5438 ..............................................................22 BS 5592 ..............................................................29 BS 5651 ..............................................................22 BS 5722 ..............................................................22 BS 6203 ..............................................................23 BS 6949 ..............................................................23 BS 7034 ..............................................................30 BS 7157 ..............................................................23 BS 7175 ..............................................................23 BS 7231 ........................................................23, 24 BS 7603 ..............................................................30 BS 7604 ..............................................................30 BS 7837 ..............................................................24 BS 7843 ..............................................................24 DD CEN/TS 15451 ........................................14, 28 DD CEN/TS 15452 ........................................14, 28 BS EN 285 ..........................................................28 BS EN 993 ..............................................11, 14, 28 BS EN ISO 1042 ..................................................31 BS EN ISO 1893 ............................................11, 28 BS EN ISO 3071 ..................................................31 BS EN ISO 7326 ............................................12, 28 BS EN ISO 8330 ..................................................12 BS EN ISO 8388 ..................................................31 BS EN ISO 8655 ..................................................31 BS EN ISO 9300 ..................................................32 BS EN ISO 10306 ................................................32 BS EN ISO 10601 ................................................16 BS EN ISO 11140 ................................................32 BS EN ISO 12947 ................................................32 BS EN 13121 ......................................................12 BS EN 13589 ......................................................12 BS EN ISO 14184 ................................................32 BS EN ISO 14698 ................................................32 BS EN ISO 15181 ................................................12 BS EN 15451 ................................................14, 28 BS EN 15452 ................................................14, 28 BS EN ISO 16282 ..........................................14, 28 BS EN ISO 21003 ................................................14 BS EN 27326 ................................................12, 28 BS ISO 1924 .......................................................34 BS ISO 2080 .......................................................16

5

British Standards - Quick Reference Guide continued... BS ISO 2781 .................................................16, 27 BS ISO 3354 .................................................16, 27 BS ISO 3585 .......................................................34 BS ISO 3966 .................................................17, 27 BS ISO 4266 .......................................................34 BS ISO 4800 .......................................................34 BS ISO 5626 .......................................................34 BS ISO 6939 .......................................................35 BS ISO 7194 .................................................17, 27 BS ISO 9276 .......................................................35 BS ISO 10601 .....................................................16 BS ISO 12040 .....................................................35 BS ISO 12218 .....................................................35 BS ISO 12636 .....................................................35 BS ISO 12641 .....................................................35 BS ISO 12643 ...............................................17, 29 BS ISO 12645 .....................................................35 BS ISO 12649 ...............................................17, 29 BS ISO 14127 .....................................................17 BS ISO 14368 .....................................................35 BS ISO 14686 .....................................................36 BS ISO 24453 ...............................................18, 27 BS ISO 24454 ...............................................18, 27 PD 2777 .............................................................26

Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

6

215 ................................................................21 684 ..........................................................12, 27 903 ...................................................16, 18, 27 1042 .................................................16, 17, 27 1070 ..............................................................21 1088 ..............................................................21 1129 ..............................................................21 1139 ..............................................................21 1170 ..............................................................21 1196 ..............................................................21 1217 ..............................................................10 1363 ..............................................................10 1425 ..............................................................21 1434 ..............................................................21 1747 ..............................................................29 1749 ..............................................................25 1781 ..............................................................21 1806 ..............................................................17 2000 ..............................................................12 2037 ..............................................................21 2051 ........................................................25, 26 2081 ..............................................................21 2482 ..............................................................21 2486 ..............................................................21 2520 ..............................................................26 2627 ..............................................................21 2740 ..............................................................26 2741 ..............................................................27 2782 ..............................................................26 2811 ..............................................................27 2846 ..............................................................21 2897 ..............................................................21 2922 ..............................................................29 2975 ........................................................10, 27 3169 ..............................................................27 3288 ..............................................................26 3416 ..............................................................21 3643 ..............................................................29 3668 ..............................................................21 3698 ..............................................................21 3728 ..............................................................21 3900 ........................................................12, 22 3985 ..............................................................22 4184 ..............................................................29 4235 ..............................................................29 4305 ........................................................10, 27 4505 ..............................................................26 4532 ..............................................................22 4569 ..............................................................22 4578 ..............................................................22 4652 ..............................................................22 4723 ..............................................................22 4737 ..............................................................27 4842 ..............................................................22 4940 ..............................................................22 4994 ..............................................................12 5080 ..............................................................22 5332 ..............................................................26

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

5335 5412 5431 5438 5446 5477 5561 5592 5606 5651 5686 5722 5724 5803 5839 5892 5950 5999 6001 6023 6068 6102 6114 6200 6203 6270 6297 6313 6321 6463 6469 6529 6616 6622 6658 6750 6753 6911 6912 6913 6915 6949 7011 7012 7034 7157 7175 7231 7255 7317 7354 7440 7460 7471 7505 7520 7533 7564 7568 7603 7604 7614 7707 7708 7755 7835 7837 7843 7867 7870 7884 7894 7903 7928 7944 7972 7977 7997 8008 8103 8409 8420 8422 8426 8468 8502

..............................................................22 ..............................................................26 ..............................................................22 ..............................................................22 ..............................................................22 ..............................................................26 ..............................................................22 ..............................................................29 ..............................................................21 ..............................................................22 ..............................................................29 ..............................................................22 ........................................................18, 27 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................26 ..............................................................23 ..............................................................29 .................................................29, 30, 33 ..............................................................25 ..............................................................30 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................19 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................26 ..............................................................26 ..............................................................19 ..............................................................23 ..............................................................21 ..............................................................23 ..............................................................30 ..............................................................30 ..............................................................30 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................23 ..............................................................30 ..............................................................23 ..............................................................23 ........................................................23, 24 ..............................................................24 ..............................................................24 ..............................................................24 ..............................................................30 ..............................................................24 ..............................................................30 ..............................................................24 ........................................................15, 27 ..............................................................24 ........................................................17, 27 ........................................................17, 27 ..............................................................30 ..............................................................30 ..............................................................30 ..............................................................30 ..............................................................30 ..............................................................30 ..............................................................19 ..............................................................24 ..............................................................24 ..............................................................25 ........................................................24, 26 ..............................................................24 ..............................................................26 ..............................................................24 ..............................................................24 ..............................................................25 ..............................................................24 ..............................................................24 ........................................................19, 27 ..............................................................20 ..............................................................28 ..............................................................25 ..............................................................25 ..............................................................25 ..............................................................25 ..............................................................10 ..............................................................25


BS 8509 ..............................................................10 BS 9124 ..............................................................10 BIP 0101 .............................................................19 BIP 0102 .............................................................19 BIP 0103 .............................................................19 BIP 0104 .............................................................19 BIP 0105 .............................................................19 BIP 0106 .............................................................19 KIT 201 ...............................................................19 DD CEN/TS 15209 ........................................19, 27 DD CEN/TS 15451 ........................................14, 28 DD CEN/TS 15452 ........................................14, 28 DD CEN ISO/TS 12181 ........................................18 DD CEN ISO/TS 12780 ........................................18 DD CEN ISO/TS 12781 ........................................18 DD CEN ISO/TS 14253 ........................................19 DD CEN ISO/TS 20836 ........................................33 DD 7971 .............................................................24 DD 8464 .............................................................25 BS EN 71 ............................................................20 BS EN ISO 140 ....................................................31 BS EN 198 ....................................................10, 27 BS EN 285 ..........................................................28 BS EN 289 ..........................................................20 BS EN 378 ..........................................................10 BS EN 694 ..........................................................27 BS EN 737 ....................................................12, 28 BS EN ISO 898 ....................................................31 BS EN 993 ..............................................11, 14, 28 BS EN ISO/IEC 17040 ..........................................33 BS EN 1041 ........................................................10 BS EN ISO 1042 ..................................................31 BS EN 1090 ........................................................10 BS EN 1112 ..................................................11, 28 BS EN 1113 ..................................................11, 28 BS EN ISO 1127 ..................................................31 BS EN 1176 ..................................................19, 20 BS EN 1332 ........................................................11 BS EN 1366 ........................................................11 BS EN ISO 1567 ............................................14, 28 BS EN 1733 ..................................................12, 28 BS EN ISO 1893 ............................................11, 28 BS EN 1947 ........................................................27 BS EN 2349 ........................................................11 BS EN 2714 ........................................................11 BS EN ISO 3071 ..................................................31 BS EN 3161 ........................................................11 BS EN ISO 3449 ..................................................31 BS EN ISO 3452 ..................................................31 BS EN 3545 ........................................................11 BS EN 3733 ........................................................11 BS EN ISO 3977 ..................................................25 BS EN 4075 ........................................................11 BS EN ISO 4157 ..................................................31 BS EN 4165 ........................................................11 BS EN ISO 4490 ..................................................11 BS EN 4631 ........................................................12 BS EN ISO 5495 ..................................................31 BS EN ISO 5778 ..................................................31 BS EN ISO 6042 ..................................................31 BS EN ISO 6115 ..................................................31 BS EN ISO 6185 ..................................................31 BS EN ISO 6874 ..................................................31 BS EN ISO 7225 ..................................................31 BS EN ISO 7326 ............................................12, 28 BS EN ISO 7488 ..................................................31 BS EN ISO 7518 ..................................................31 BS EN ISO 7944 ..................................................31 BS EN ISO 7965 ..................................................31 BS EN ISO 7998 ..................................................31 BS EN ISO 8099 ..................................................31 BS EN ISO 8330 ..................................................12 BS EN ISO 8362 ..................................................31 BS EN ISO 8367 ..................................................31 BS EN ISO 8388 ..................................................31 BS EN ISO 8534 ............................................12, 27 BS EN ISO 8655 ..................................................31 BS EN ISO 8836 ............................................12, 28 BS EN ISO 8861 ..................................................31 BS EN ISO 8871 ............................................31, 32 BS EN ISO 9000 ..................................................32 BS EN ISO 9170 ............................................12, 28 BS EN ISO 9283 ..................................................32 BS EN ISO 9300 ..................................................32 BS EN ISO 9687 ..................................................32 BS EN ISO 9873 ..................................................32


Alpha-numeric sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

8

EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN

ISO 10273 ................................................32 ISO 10306 ................................................32 ISO 10426 ................................................32 ISO 10534 ................................................32 ISO 10601 ................................................16 ISO 11114 ................................................32 ISO 11140 ................................................32 ISO 11812 ................................................32 ISO 11844 ................................................16 12010 ................................................14, 28 12517 ......................................................12 12564 ................................................14, 28 ISO 12732 ................................................16 12798 ......................................................12 ISO 12947 ................................................32 ISO 13090 ................................................32 13121 ......................................................12 13161 ......................................................12 13220 ................................................12, 28 13328 ......................................................14 ISO 13503 ................................................32 ISO 13567 ................................................32 13589 ......................................................12 ISO 13753 ................................................32 ISO 13849 ................................................12 13904 ................................................11, 28 13905 ................................................11, 28 ISO 13929 ................................................32 ISO 14024 ................................................32 14033 ......................................................12 ISO 14184 ................................................32 14197 ......................................................25 14353 ......................................................12 14617 ......................................................12 ISO 14698 ................................................32 ISO 14815 ................................................32 14892 ......................................................12 ISO 14915 ................................................32 14989 ......................................................12 ISO 15002 ..........................................12, 28 15096 ......................................................12 ISO 15181 ................................................12 15254 ......................................................14 ISO 15329 ................................................16 15451 ................................................14, 28 15452 ................................................14, 28 15565 ......................................................14 ISO 15584 ................................................32 15838 ......................................................20 ISO 15867 ................................................32 ISO 15927 ................................................33 ISO 16282 ..........................................14, 28 ISO 16784 ................................................16 ISO 17294 ................................................33 ISO 18153 ................................................33 ISO 19054 ................................................33 ISO 19901 ................................................33 ISO 19980 ................................................33 ISO 20126 ................................................33 ISO 20795 ..........................................14, 28 ISO 21003 ................................................14 ISO 21007 ................................................33 ISO 21534 ..........................................14, 28 ISO 21536 ..........................................14, 28 ISO 22000 ................................................33 ISO 22254 ................................................33 ISO 22374 ................................................33 ISO 23328 ................................................14 26553 ......................................................33 26554 ......................................................33 26590 ......................................................33 26591 ......................................................33 26599 ......................................................33 26948 ......................................................33 27023 ......................................................33 27326 ................................................12, 28 27841 ......................................................33 27842 ......................................................33 27965 ......................................................33 28848 ......................................................33 50083 ......................................................15 50090 ......................................................14 50153 ......................................................33 50264 ................................................14, 28 50281 ......................................................28 50311 ......................................................33

BS EN 50338 ......................................................28 BS EN 50343 ......................................................33 BS EN 50500 ......................................................14 BS EN 60079 ......................................................28 BS EN 60216 ......................................................14 BS EN 60384 ................................................14, 29 BS EN 60431 ......................................................28 BS EN 60512 ......................................................15 BS EN 60519 ......................................................28 BS EN 60601 ................................................15, 45 BS EN 60728 ......................................................15 BS EN 60730 ......................................................28 BS EN 60871 ......................................................28 BS EN 60901 ......................................................20 BS EN 61241 ......................................................28 BS EN 61300 ......................................................15 BS EN 61318 ................................................15, 27 BS EN 61347 ......................................................15 BS EN 61355 ......................................................15 BS EN 61784 ................................................15, 16 BS EN 61810 ......................................................16 BS EN 62024 ......................................................16 BS EN 62256 ......................................................16 BS EN 62317 ................................................16, 28 BS EN 62320 ......................................................16 BS EN 80416 ......................................................33 BS EN 130101 ..............................................14, 29 BS EN 130102 ..............................................14, 29 BS EN 130500 ....................................................29 BS EN 130501 ....................................................29 DD ENV 1090 .....................................................10 BS ISO 68 .....................................................33, 34 BS ISO 261 .........................................................34 BS ISO 262 .........................................................34 BS ISO 461 ...................................................16, 29 BS ISO 639 ...................................................16, 34 BS ISO 965 .........................................................34 BS ISO 1008 .......................................................25 BS ISO 1222 .......................................................25 BS ISO 1924 .......................................................34 BS ISO 1940 .......................................................34 BS ISO 2080 .......................................................16 BS ISO 2781 .................................................16, 27 BS ISO 3057 .......................................................34 BS ISO 3058 .......................................................34 BS ISO 3354 .................................................16, 27 BS ISO 3585 .......................................................34 BS ISO 3601 .................................................17, 20 BS ISO 3828 .......................................................17 BS ISO 3966 .................................................17, 27 BS ISO 4121 .......................................................34 BS ISO 4141 .......................................................34 BS ISO 4156 .......................................................34 BS ISO 4251 .......................................................34 BS ISO 4266 .......................................................34 BS ISO 4306 .......................................................34 BS ISO 4800 .......................................................34 BS ISO 5626 .......................................................34 BS ISO 5667 .......................................................34 BS ISO 6752 .................................................17, 27 BS ISO 6768 .......................................................34 BS ISO 6939 .......................................................35 BS ISO 7141 .......................................................35 BS ISO 7194 .................................................17, 27 BS ISO 7588 .......................................................35 BS ISO 7867 .......................................................35 BS ISO/IEC 7942 .................................................35 BS ISO 8705 .......................................................35 BS ISO 8843 .......................................................17 BS ISO 9276 .......................................................35 BS ISO 10069 ...............................................17, 27 BS ISO 10073 ...............................................17, 27 BS ISO 10231 .....................................................35 BS ISO 10601 .....................................................16 BS ISO 10653 .....................................................35 BS ISO 10654 .....................................................35 BS ISO 10972 .....................................................35 BS ISO 11157 .....................................................35 BS ISO 11262 .....................................................35 BS ISO 11620 ...............................................17, 29 BS ISO 11844 .....................................................16 BS ISO 11992 .....................................................35 BS ISO 12040 .....................................................35 BS ISO 12218 .....................................................35 BS ISO 12231 .....................................................25 BS ISO 12257 .....................................................17


BS ISO 12478 .....................................................35 BS ISO 12636 .....................................................35 BS ISO 12641 .....................................................35 BS ISO 12643 ...............................................17, 29 BS ISO 12645 .....................................................35 BS ISO 12649 ...............................................17, 29 BS ISO 12732 .....................................................16 BS ISO 13202 .....................................................35 BS ISO 13299 .....................................................35 BS ISO 13302 .....................................................35 BS ISO 13373 .....................................................35 BS ISO 13457 .....................................................17 BS ISO 13528 .....................................................35 BS ISO 13988 .....................................................17 BS ISO 14127 .....................................................17 BS ISO 14132 .....................................................17 BS ISO 14368 .....................................................35 BS ISO/IEC 14478 ...............................................35 BS ISO 14621 .....................................................36 BS ISO 14686 .....................................................36 BS ISO 14808 .....................................................25 BS ISO 14835 .....................................................36 BS ISO 14837 .....................................................36 BS ISO 15010 .....................................................36 BS ISO 15329 .....................................................16 BS ISO 15686 .....................................................17 BS ISO 16121 .....................................................36 BS ISO 16642 .....................................................36 BS ISO 16653 .....................................................17 BS ISO 16784 .....................................................16 BS ISO 16889 .....................................................17 BS ISO 17058 .....................................................25 BS ISO 17554 .....................................................36 BS ISO 17604 .....................................................36 BS ISO 17724 .....................................................36 BS ISO 18738 .....................................................36 BS ISO 18770 .....................................................36 BS ISO 18932 .....................................................25 BS ISO 19005 .....................................................36 BS ISO 19379 .....................................................36 BS ISO 21018 .....................................................18 BS ISO 21069 .....................................................18 BS ISO 21527 .....................................................18 BS ISO 22641 .....................................................36 BS ISO 22642 .....................................................36 BS ISO 22645 .....................................................36 BS ISO 22646 .....................................................36 BS ISO 22664 .....................................................36 BS ISO 22667 .....................................................36 BS ISO 23909 .....................................................18 BS ISO 24453 ...............................................18, 27 BS ISO 24454 ...............................................18, 27 BS ISO/IEC 24754 ...............................................18 BS ISO 26402 .....................................................18 BS IEC 61892 ......................................................18 DD ISO/PAS 30003 ..............................................19 DD ISO/TS 13473 ................................................19 DD ISO/TS 13899 ................................................25 DD ISO/TS 16649 ................................................36 DD IEC/PAS 62443 ..............................................19 DD IEC/TS 62395 ................................................19 PD CEN/TR 13688 ...............................................18 PD CEN/TR 15753 ...............................................18 PD CEN/TR 15762 ...............................................18 PD 0026 .............................................................25 PD 2777 .............................................................26 PD 6446 .............................................................21 PD 6533 .............................................................23 PD 6682 .............................................................23 PD ISO/IEC TR 9126 ............................................36 PD ISO/IEC TR 18037 ..........................................18 PD ISO/TR 20983 ..........................................17, 29 PD CLC/TR 50454 ...............................................18 PD IEC/TR 60977 ..........................................18, 27 PD IEC/TR 62510 ................................................18 BS 4G 173 ....................................................16, 29 BS Z 10 ...............................................................36 BS MA 2 .............................................................25 BS MA 97 ...........................................................36 BS QC 300101 .............................................14, 29 BS AU 50 ............................................................36 PAS 109 ..............................................................19 PAS 126 ..............................................................20


British Standards

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2).

BS 8468:—

NA to BS EN 1998-5:2004

Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents

Foundations, retaining structures and geotechnical aspects

BS 8468-4:2008 Powered air-purifying respirators. Specification

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section.

no current standard is superseded ISBN 978 0 580 56883 1 £57.00 members, £114.00 non-members

Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute members.

BS 8509:2008


B/524/4

BS 9124:2008 Specification for steel and aluminium access cover systems with over 1 m clear opening no current standard is superseded ISBN 978 0 580 57176 3 £57.00 members, £114.00 non-members B/505

BS 1363-5:2008

UK National Annex to Eurocode 4. Design of composite steel and concrete structures

NA to BS EN 1994-1-1:2004 General rules and rules for buildings no current standard is superseded ISBN 978 0 580 54981 6 £32.00 members, £64.00 non-members

NA to BS EN 1994-1-2:2005 General rules. Structural fire design no current standard is superseded ISBN 978 0 580 54982 3 £32.00 members, £64.00 non-members

BS EN PUBLICATIONS

BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard.

BS EN 198:2008 Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods supersedes BS 4305-1:1989 ISBN 978 0 580 54947 2 £57.00 members, £114.00 non-members B/503

BS EN 378:— Refrigerating systems and heat pumps. Safety and environmental requirements

BS EN 378-1:2008 Basic requirements, definitions, classification and selection criteria

B/525/4

supersedes BS EN 378-1:2000 ISBN 978 0 580 53384 6 £80.00 members, £160.00 non-members

NA to BS EN 1998:—

RHE/18

UK National Annex to Eurocode 8. Design of structures for earthquake resistance

BS EN 1041:2008 Information supplied by the manufacturer of medical devices

Specification for fused conversion plugs no current standard is superseded ISBN 978 0 580 53655 7 £85.00 members, £170.00 non-members

NA to BS EN 1998-1:2004

PEL/23


BS 2975:—

B/525/8

NA to BS EN 1994:—

BS 1363:— 13 A plugs, socket-outlets, adaptors and connection units

Towers, masts and chimneys

The following are British Standard implementations of the English language versions of European Standards (ENs).

BS 1217:2008 supersedes BS 1217:1997 ISBN 978 0 580 60693 9 £32.00 members, £64.00 non-members

NA to BS EN 1998-6:2005

Children’s beds for domestic use. Safety requirements and test methods

B/525/4

Cast stone. Specification

B/525/8


PH/4

CW/41

BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED.


General rules, seismic actions and rules for buildings

supersedes BS EN 1041:1998 which remains current ISBN 978 0 580 54661 7 £57.00 members, £114.00 non-members CH/210/3

BS EN 1090:—

Sampling and analysis of glass-making sands

B/525/8

Execution of steel structures and aluminium structures

BS 2975-2:2008

NA to BS EN 1998-4:2006

BS EN 1090-3:2008

Methods for chemical analysis

Silos, tanks and pipelines

Technical requirements for aluminium structures

supersedes BS 2975:1988 ISBN 978 0 580 58104 5 £57.00 members, £114.00 non-members


supersedes DD ENV 1090-3:2000 ISBN 978 0 580 55320 2 £90.00 members, £180.00 non-members

LBI/36/5

B/525/8

B/525/9

10



BS EN 1112:2008

BS EN 2349-411:2007

BS EN 3545-009:2008

Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification

Temperature change

Protective cover for plug and receptacle. Product standard

supersedes BS EN 1112:1997 and BS EN 13904:2003 ISBN 978 0 580 57422 1 £57.00 members, £114.00 non-members B/504/8

BS EN 1113:2008 Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification supersedes BS EN 1113:1997 and BS EN 13905:2003 ISBN 978 0 580 57420 7 £57.00 members, £114.00 non-members B/504/8

BS EN 1332:—

no current standard is superseded ISBN 978 0 580 56756 8 £32.00 members, £64.00 non-members ACE/6

ACE/6

BS EN 2349-412:2007 Seal

BS EN 3733:—


Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuous

ACE/6

BS EN 2349-413:2007

Receptacle, connector, four hole fixing cable according to EN 4532, product standard



ACE/6

ACE/6

BS EN 2349-414:2007

BS EN 1332-3:2008



Mechanical shock

ACE/6

BS EN 2349-415:2007

IST/17

Acceleration

BS EN 1366:—


Fire resistance tests for service installations

BS EN 1366-9:2008 Single compartment smoke extraction ducts no current standard is superseded ISBN 978 0 580 59170 9 £75.00 members, £150.00 non-members FSH/22

BS EN ISO 1893:2008 Refractory products. Determination of refractoriness under load. Differential method with rising temperature

BS EN 3733-004:2008

Vibration, sinusoidal and random

Identification card systems. Man-machine interface

Keypads


BS EN 3733-005:2007 Receptacle, connector, two hole fixing for cable according to EN 4532, product standard no current standard is superseded ISBN 978 0 580 58506 7 £32.00 members, £64.00 non-members ACE/6

BS EN 3733-101:2008 Protective cover receptacle. Product standard

ACE/6


BS EN 2714:—

ACE/6

Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C

BS EN 4075:2008

BS EN 2714-009:2007 Screened (spiral) and jacketed, YAG X3 laser printable. Product standard no current standard is superseded ISBN 978 0 580 56456 7 £32.00 members, £64.00 non-members

Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature)/425°C no current standard is superseded ISBN 978 0 580 57075 9 £32.00 members, £64.00 non-members ACE/12


ACE/6

BS EN 3161:2007

BS EN 4165:—

RPI/1

Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa

Aerospace series. Connectors, electrical, rectangular, modular. Operating temperatures 175°C continuous


BS EN 4165-005:2007

BS EN 2349:— Aerospace series. Requirements and test procedures for relays and contactors

ACE/61/-/15

BS EN 2349-409:2007 Ozone resistance

BS EN 3545:—


Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C

ACE/6

Stackable receptacle 2 and 4 modules, series 3. Product standard no current standard is superseded ISBN 978 0 580 53141 5 £32.00 members, £64.00 non-members ACE/6

BS EN ISO 4490:2008 BS EN 3545-002:2008

Mould

Specification of performance and contact arrangements

Metallic powders. Determination of flow time by means of a calibrated funnel (Hall flowmeter)



supersedes BS EN ISO 4490:2002 ISBN 978 0 580 62465 0 £32.00 members, £64.00 non-members

ACE/6

ACE/6

ISE/65

BS EN 2349-410:2007



11

BS EN Publications continued... BS EN 4631:2007

BS EN 12798:2007

BS EN 14617:—

Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1050 MPa

Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety

Agglomerated stone. Test methods

no current standard is superseded ISBN 978 0 580 56546 5 £32.00 members, £64.00 non-members ACE/61/-/15

supersedes BS EN 12798:1999 ISBN 978 0 580 53850 6 £40.00 members, £80.00 non-members TW/2

BS EN ISO 7326:2008 Rubber and plastics hoses. Assessment of ozone resistance under static conditions supersedes BS EN 27326:1993 ISBN 978 0 580 54857 4 £40.00 members, £80.00 non-members PRI/66

BS EN ISO 8330:2008

BS EN 14617-2:2008 Determination of flexural strength (bending) supersedes BS EN 14617-2:2004 ISBN 978 0 580 59953 8 £32.00 members, £64.00 non-members B/545

BS EN 13121:— GRP tanks and vessels for use above ground

BS EN 13121-3:2008 Design and workmanship supersedes BS 4994:1987 which remains current ISBN 978 0 580 57491 7 £118.00 members, £236.00 non-members

BS EN 14892:2005 Transport service. City logistics. Guideline for the definition of limited access to city centres no current standard is superseded ISBN 978 0 580 54507 8 £32.00 members, £64.00 non-members TW/2

Rubber and plastics hoses and hose assemblies. Vocabulary

PRI/5

supersedes BS EN ISO 8330:2000 ISBN 978 0 580 54400 2 £75.00 members, £150.00 non-members

BS EN 13161:2008

BS EN 14989:—

Natural stone test methods. Determination of flexural strength under constant moment

PRI/66

supersedes BS EN 13161:2001 ISBN 978 0 580 58536 4 £40.00 members, £80.00 non-members

Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications

BS EN ISO 8534:2008 Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free) supersedes BS 684-2.1:1996 ISBN 978 0 580 58780 1 £40.00 members, £80.00 non-members AW/307

BS EN ISO 8836:2008 Suction catheters for use in the respiratory tract supersedes BS EN 1733:2002 ISBN 978 0 580 61372 2 £40.00 members, £80.00 non-members CH/121/5

BS EN ISO 9170:—

BS EN 14989-2:2007

B/545

BS EN 13589:2008 (BS 2000-520:2008) Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method supersedes BS EN 13589:2003, BS 2000-520:2003 ISBN 978 0 580 59464 9 £27.00 members, £36.00 non-members

Flue and air supply ducts for room sealed appliances no current standard is superseded ISBN 978 0 580 54633 4 £85.00 members, £170.00 non-members B/506

BS EN ISO 15002:2008

PTI/13

Flow-metering devices for connection to terminal units of medical gas pipeline systems

BS EN ISO 13849:—


Safety of machinery. Safety-related parts of control systems

CH/121/6

Terminal units for medical gas pipeline systems

BS EN ISO 13849-2:2008 BS EN ISO 9170-1:2008

Validation

BS EN 15096:2008

Terminal units for use with compressed medical gases and vacuum

supersedes BS EN ISO 13849-2:2003 ISBN 978 0 580 61835 2 £80.00 members, £160.00 non-members

Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification

supersedes BS EN 737-1:1998 ISBN 978 0 580 55057 7 £57.00 members, £114.00 non-members CH/121/6

BS EN ISO 9170-2:2008

MCE/3

BS EN 14033:—


Railway applications. Track. Railbound construction and maintenance machines

B/504/4

BS EN 14033-2:2008

BS EN ISO 15181:—

Technical requirements for working

Paints and varnishes. Determination of release rate of biocides from antifouling paints

Terminal units for anaesthetic gas scavenging systems supersedes BS EN 737-4:1998 ISBN 978 0 580 55058 4 £65.00 members, £130.00 non-members CH/121/6

BS EN 12517:—

no current standard is superseded ISBN 978 0 580 53702 8 £85.00 members, £170.00 non-members RAE/2

Non-destructive testing of welds

BS EN ISO 15181-5:2008 (BS 3900-K5:2008)

Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels

Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods

Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract




WEE/46

B/544/2

STI/10

BS EN 12517-2:2008

12

BS EN 14353:2007



BS EN Publications continued... BS EN 15254:—

BS EN ISO 21003-5:2008

BS EN 50264-2:—

Extended application of results from fire resistance tests. Non-loadbearing walls

Fitness for purpose of the system

Cables with crosslinked elastomeric insulation

BS EN 50264-2-1:2008

BS EN 15254-4:2008


Glazed constructions

PRI/88/2


BS EN ISO 21534:2007

FSH/22

Non-active surgical implants. Joint replacement implants. Particular requirements

BS EN 15451:2008


Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography supersedes DD CEN/TS 15451:2006 ISBN 978 0 580 60411 9 £40.00 members, £80.00 non-members CII/37

BS EN 15452:2008 Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC supersedes DD CEN/TS 15452:2006 ISBN 978 0 580 60412 6 £40.00 members, £80.00 non-members CII/37

CH/150/4

Single core cables supersedes BS EN 50264-2:2002 ISBN 978 0 580 55568 8 £57.00 members, £114.00 non-members GEL/20/12

BS EN 50264-2-2:2008 Multicore cables supersedes BS EN 50264-3:2002 ISBN 978 0 580 64072 8 £57.00 members, £114.00 non-members GEL/20/12

BS EN ISO 21536:2007 Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants supersedes BS EN 12564:1999 ISBN 978 0 580 56287 7 £32.00 members, £64.00 non-members CH/150/4

BS EN ISO 23328:— Breathing system filters for anaesthetic and respiratory use

BS EN 50264-3:— Cables with crosslinked elastomeric insulation with reduced dimensions

BS EN 50264-3-1:2008 Single core cables no current standard is superseded ISBN 978 0 580 64073 5 £57.00 members, £114.00 non-members GEL/20/12

BS EN 50264-3-2:2008 BS EN 15565:2008

BS EN ISO 23328-2:2008

Multicore cables

Tourism services. Requirements for the provision of professional tourist guide training and qualification programmes

Non-filtration aspects




BS EN 50500:2008

SVS/2/3

BS EN 50090:— BS EN ISO 16282:2008 Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature supersedes BS EN 993-20:2004 ISBN 978 0 580 56669 1 £40.00 members, £80.00 non-members RPI/1

GEL/20/12

CH/121/5

Home and building electronic systems (HBES)

BS EN 50090-4-3:2007 Media independent layers. Communication over IP no current standard is superseded ISBN 978 0 580 60771 4 £32.00 members, £64.00 non-members IST/6

Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure no current standard is superseded ISBN 978 0 580 56038 5 £40.00 members, £80.00 non-members GEL/9

BS EN 60216:— Electrical insulating materials. Thermal endurance properties

BS EN ISO 20795:— Dentistry. Base polymers

BS EN 50090-5-3:2006 BS EN ISO 20795-1:2008 Denture base polymers supersedes BS EN ISO 1567:2001 ISBN 978 0 580 58675 0 £75.00 members, £150.00 non-members

Media and media dependent layers. Radio frequency no current standard is superseded ISBN 978 0 580 57837 3 £57.00 members, £114.00 non-members

BS EN 60216-5:2008 Determination of relative thermal endurance index (RTE) of an insulating material supersedes BS EN 60216-5:2003 ISBN 978 0 580 58072 7 £57.00 members, £114.00 non-members GEL/112

IST/6

CH/106/2

BS EN ISO 21003:— Multilayer piping systems for hot and cold water installations inside buildings

BS EN 50264:— Railway applications. Railway rolling stock power and control cables having special fire performance

BS EN 60384:— Fixed capacitors for use in electronic equipment

BS EN 60384-11-1:2008 Blank detail specification. Fixed polyethyleneterephthalate film dielectric metal foil D.C. capacitors. Assessment level EZ

BS EN ISO 21003-3:2008

BS EN 50264-1:2008

Fittings

General requirements



supersedes BS EN 130101:1998, BS EN 130102:1998 and BS QC 300101:1993 ISBN 978 0 580 57747 5 £40.00 members, £80.00 non-members

PRI/88/2

GEL/20/12

EPL/40X

14



BS EN 60512:—

BS EN 60601:—

BS EN 61784:—

Connectors for electronic equipment. Tests and measurements

Medical electrical equipment

Industrial communication networks. Profiles

BS EN 60601-1-10:2008

BS EN 61784-3:—

General requirements for basic safety and essential performance. Collateral Standard. Requirements for the development of physiologic closed-loop controllers

Functional safety fieldbuses


Additional specifications for CPF 1

BS EN 60512-16:— Mechanical tests on contacts and terminations

BS EN 60512-16-1:2008 Test 16a. Probe damage no current standard is superseded ISBN 978 0 580 55906 8 £32.00 members, £64.00 non-members EPL/48

BS EN 60512-16-2:2008

CH/62/1

EPL/48

BS EN 60512-16-4:2008 Test 16d. Tensile strength (crimped connections) no current standard is superseded ISBN 978 0 580 55910 5 £32.00 members, £64.00 non-members EPL/48

BS EN 60512-16-8:2008 Test 16h. Insulating grip effectiveness (crimped connections) no current standard is superseded ISBN 978 0 580 55915 0 £32.00 members, £64.00 non-members EPL/48

AMT/7

Cable networks for television signals, sound signals and interactive services

BS EN 61784-3-2:2008

BS EN 60728-1:2008


System performance of forward paths

AMT/7

EPL/100


BS EN 61300:— Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

BS EN 61300-3-42:2008 Examinations and measurements. Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves no current standard is superseded ISBN 978 0 580 54578 8 £32.00 members, £64.00 non-members GEL/86/2

no current standard is superseded ISBN 978 0 580 55916 7 £32.00 members, £64.00 non-members EPL/48


supersedes BS EN 50083-7:1997 which remains current ISBN 978 0 580 56973 9 £108.00 members, £216.00 non-members

BS EN 61784-3-3:2008 no current standard is superseded ISBN 978 0 580 61650 1 £98.00 members, £196.00 non-members AMT/7

BS EN 61784-3-6:2008 Additional specifications for CPF 6 no current standard is superseded ISBN 978 0 580 61652 5 £85.00 members, £170.00 non-members AMT/7

BS EN 61784-5:— Installation of fieldbuses

BS EN 60512-16-9:2008 Test 16i. Grounding contact spring holding force


BS EN 60728:—

Test 16b. Restricted entry no current standard is superseded ISBN 978 0 580 55908 2 £32.00 members, £64.00 non-members

BS EN 61784-3-1:2008

BS EN 61318:2008 Live working. Conformity assessment applicable to tools, devices and equipment

BS EN 61784-5-2:2008



PEL/78

AMT/7

Installation profiles for CPF 2

BS EN 60512-16-11:2008 Test 16k. Stripping force, solderless wrapped connections no current standard is superseded ISBN 978 0 580 55917 4 £32.00 members, £64.00 non-members EPL/48

BS EN 60512-16-13:2008 Test 16m. Un-wrapping, solderless wrapped connections no current standard is superseded ISBN 978 0 580 55918 1 £32.00 members, £64.00 non-members

BS EN 61347:— Lamp controlgear

BS EN 61347-1:2008 General and safety requirements supersedes BS EN 61347-1:2001 which remains current ISBN 978 0 580 55748 4 £85.00 members, £170.00 non-members CPL/34/3

BS EN 61355:—

BS EN 61784-5-3:2008 Installation profiles for CPF 3 no current standard is superseded ISBN 978 0 580 61654 9 £90.00 members, £180.00 non-members AMT/7

BS EN 61784-5-6:2008 Installation profiles for CPF 6 no current standard is superseded ISBN 978 0 580 61655 6 £80.00 members, £160.00 non-members

EPL/48

Classification and designation of documents for plants, systems and equipment

BS EN 60512-16-18:2008

BS EN 61355-1:2008

BS EN 61784-5-10:2008

Test 16r. Deflection of contacts, simulation

Rules and classification tables

Installation profiles for CPF 10




EPL/48

GEL/3

AMT/7



AMT/7

15

BS EN Publications continued... BS EN 61784-5-11:2008 Installation profiles for CPF 11 no current standard is superseded ISBN 978 0 580 61657 0 £57.00 members, £114.00 non-members AMT/7

BS EN 61810:— Electromechanical elementary relays

BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the ’Amendments to British Standards’ and ’Updated British Standards’ sections of this issue of Update Standards.

BS EN ISO 16784-2:2008 Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig ISE/NFE/8

Implementation of European Standard EN ISO 16784-2 by amendment to BS ISO 167842:2006

BS EN ISO 10601:2008 Micaceous iron oxide pigments for paints. Specifications and test methods

BS IMPLEMENTATIONS


STI/1

EPL/94

BS EN ISO 11844:—

BS EN 62024:—

Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added.

BS EN 61810-1:2008 General requirements

High frequency inductive components. Electrical characteristics and measuring methods

BS EN 62024-1:2008 Nanohenry range chip inductor supersedes BS EN 62024-1:2002 ISBN 978 0 580 58216 5 £40.00 members, £80.00 non-members

Implementation of European Standard EN ISO 10601 by amendment to BS ISO 10601:2007

BS EN ISO 11844-1:2008 Determination and estimation of indoor corrosivity

Note: The date referenced in the identifier is the date of the international standard.

ISE/NFE/8


BS ISO 461:—

BS EN ISO 11844-2:2008

BS ISO 461-1:2003

Determination of corrosion attack in indoor atmospheres

Design, performance and test requirements

Aircraft. Connectors for ground electrical supplies

EPL/51

BS EN 62256:2008 Hydraulic turbines, storage pumps and pumpturbines. Rehabilitation and performance improvement no current standard is superseded ISBN 978 0 580 54882 6 £103.00 members, £206.00 non-members

ISE/NFE/8


BS EN ISO 11844-3:2008

MCE/15

Measurement of environmental parameters affecting indoor corrosivity

BS EN 62317:—

supersedes BS 4G 173-1:1985 ISBN 978 0 580 53083 8 £40.00 members, £80.00 non-members ACE/6

BS ISO 639:— Codes for the representation of names of languages

Ferrite cores. Dimensions

ISE/NFE/8

BS ISO 639-5:2008 Alpha-3 code for language families and groups

BS EN 62317-13:2008


PQ-cores for use in power supply applications no current standard is superseded ISBN 978 0 580 58117 5 £40.00 members, £80.00 non-members EPL/51

BS EN ISO 12732:2008

TS/1

Corrosion of metals and alloys. Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal’s method)

BS ISO 2080:2008

ISE/NFE/8

BS EN 62320:— Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS)

BS EN 62320-2:2008 AIS AtoN Stations. Operational and performance requirements, methods of testing and required test results



Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary no current standard is superseded ISBN 978 0 580 59180 8 £80.00 members, £160.00 non-members

BS EN ISO 15329:2008

STI/33

Corrosion of metals and alloys. Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys

BS ISO 2781:2008

ISE/NFE/8



EPL/80

BS EN ISO 16784:— Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems

Rubber, vulcanized or thermoplastic. Determination of density supersedes BS 903-A1:1996 ISBN 978 0 580 58424 4 £40.00 members, £80.00 non-members PRI/22

BS ISO 3354:2008 BS EN ISO 16784-1:2008 e-mail your order [email protected]

16

Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems ISE/NFE/8



Measurement of clean water flow in closed conduits. Velocity-area method using currentmeters in full conduits and under regular flow conditions supersedes BS 1042-2.4:1989 ISBN 978 0 580 62864 1 £80.00 members, £160.00 non-members CPI/30/5


BS ISO 3601:—

BS ISO 10069-2:2008

BS ISO 14132:—

Fluid power systems. O-rings

Specification of accessories

Optics and photonics. Vocabulary for telescopic systems

BS ISO 3601-2:2008

supersedes BS 7568-13:1992 ISBN 978 0 580 63240 2 £32.00 members, £64.00 non-members

Housing dimensions for general applications

MTE/12

supersedes BS 1806:1989 ISBN 978 0 580 56329 4 £80.00 members, £160.00 non-members MCE/11

BS ISO 3828:2008 Shipbuilding and marine structures. Deck machinery. Vocabulary and symbols no current standard is superseded ISBN 978 0 580 54020 2 £40.00 members, £80.00 non-members SME/32/-/4

BS ISO 3966:2008 Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes supersedes BS 1042-2.1:1983 ISBN 978 0 580 62863 4 £80.00 members, £160.00 non-members CPI/30/5

BS ISO 6752:2008 Tools for pressing. Round punches with 60 degrees conical head and straight shank supersedes BS 7568-7:1992 ISBN 978 0 580 57365 1 £32.00 members, £64.00 non-members MTE/12

BS ISO 7194:2008 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes supersedes BS 1042-2.3:1984 ISBN 978 0 580 62862 7 £65.00 members, £130.00 non-members CPI/30/5

BS ISO 8843:2005 Aircraft. Crimp-removable contacts for electrical connectors. Identification system no current standard is superseded ISBN 978 0 580 53259 7 £32.00 members, £64.00 non-members ACE/6

BS ISO 10069:—

Terms for night vision systems

BS ISO 10073:2008 Tools for moulding. Support pillars

CPW/172/4

MTE/12

BS ISO 15686:—

BS ISO 11620:2008

Buildings and constructed assets. Service-life planning

Information and documentation. Library performance indicators supersedes PD ISO/TR 20983:2003 and BS ISO 11620:1998 ISBN 978 0 580 53938 1 £85.00 members, £170.00 non-members IDT/2/15

BS ISO 15686-8:2008 Reference service life and service-life estimation no current standard is superseded ISBN 978 0 580 53688 5 £75.00 members, £150.00 non-members B/500

BS ISO 12257:2008 Aerospace. Internal six-lobe drives. Metric series no current standard is superseded ISBN 978 0 580 63500 7 £32.00 members, £64.00 non-members

BS ISO 16653:— Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features

ACE/12

BS ISO 12643:— Graphic technology. Safety requirements for graphic technology equipment and systems

BS ISO 16653-1:2008 MEWPs with retractable guardrail systems

BS ISO 12643-3:2008


Binding and finishing equipment and systems

MHE/12

supersedes BS ISO 12649:2004 ISBN 978 0 580 57809 0 £80.00 members, £160.00 non-members PAI/43

BS ISO 13457:2008 Agricultural irrigation equipment. Water-driven chemical injector pumps no current standard is superseded ISBN 978 0 580 58374 2 £40.00 members, £80.00 non-members

BS ISO 16889:2008 Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element supersedes BS ISO 16889:1999 ISBN 978 0 580 55034 8 £80.00 members, £160.00 non-members MCE/18/-/6

AGE/30

BS ISO 13988:2008 Passenger vehicle wheels. Clip balance weight and rim flange nomenclature, test procedures and performance requirements no current standard is superseded ISBN 978 0 580 56985 2 £40.00 members, £80.00 non-members

Help Us to Help You! Always quote your Customer Number Don’t know your number?

AUE/4

BS ISO 14127:2008 General specification

Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents



MTE/12

PRI/42




Tools for pressing. Elastomer pressure springs

BS ISO 10069-1:2008

BS ISO 14132-5:2008


Contact Customer Services 020 8996 9001 who will be happy to check it for you

17

BS Implementations continued... BS ISO 21018:—

BS ISO/IEC 24754:2008

PD CLC/TR 50454:2008

Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid

Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems

Guide for the application of aluminium electrolytic capacitors

BS ISO 21018-1:2008 General principles no current standard is superseded ISBN 978 0 580 53993 0 £65.00 members, £130.00 non-members MCE/18/-/6

BS ISO 21069:— Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester

BS ISO 21069-2:2008 Air over hydraulic and purely hydraulic braking systems no current standard is superseded ISBN 978 0 580 56209 9 £57.00 members, £114.00 non-members AUE/11


Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and moulds

EPL/40X

IST/41

BS ISO 26402:2008 Agricultural vehicles. Steering systems for agricultural trailers. Interface for articulated steering device of semi-mounted trailers no current standard is superseded ISBN 978 0 580 58525 8 £32.00 members, £64.00 non-members AGE/6

BS IEC 61892:— Mobile and fixed offshore units. Electrical installations

BS IEC 61892-2:2005 System design

BS ISO 21527:—


no current standard is superseded ISBN 978 0 580 53516 1 £80.00 members, £160.00 non-members JPEL/18

PD IEC/TR 60977:2008 Medical electrical equipment. Medical electron accelerators. Guidelines for functional performance characteristics supersedes BS 5724-3.1:Supplement 1:1990 ISBN 978 0 580 56717 9 £80.00 members, £160.00 non-members CH/62/3

PD IEC/TR 62510:2008 Standardising the characteristics of electricity no current standard is superseded ISBN 978 0 580 63522 9 £32.00 members, £64.00 non-members GEL/8

DRAFTS FOR DEVELOPMENT

BS ISO 21527-1:2008 Colony count technique in products with water activity greater than 0,95 no current standard is superseded ISBN 978 0 580 57107 7 £40.00 members, £80.00 non-members AW/9

BS ISO 21527-2:2008 Colony count technique in products with water activity less than or equal to 0,95 no current standard is superseded ISBN 978 0 580 57109 1 £40.00 members, £80.00 non-members

PUBLISHED DOCUMENTS Packaging. Material recycling. Report on requirements for substances and materials to prevent a sustained impediment to recycling

DD CEN ISO/TS 12181-1:2007



PKW/0

TDW/4

PD CEN/TR 15753:2008

BS ISO 23909:2008

Packaging. Package leaflets for medicinal products. Braille and other formats for visually impaired people


Geometrical product specifications (GPS). Roundness

PD CEN/TR 13688:2008

AW/9

Soil quality. Preparation of laboratory samples from large samples

DD CEN ISO/TS 12181:—

no current standard is superseded ISBN 978 0 580 60795 0 £32.00 members, £64.00 non-members PKW/0/-/5

EH/4

PD CEN/TR 15762:2008

Vocabulary and parameters of roundness

DD CEN ISO/TS 12780:— Geometrical product specifications (GPS). Straightness

DD CEN ISO/TS 12780-2:2007 Specification operators no current standard is superseded ISBN 978 0 580 57991 2 £20.00 members, £40.00 non-members

Rubber. Acquisition and presentation of comparable single-point data

Road transport and traffic telematics. Electronic fee collection (EFC). Ensuring the correct function of EFC equipment installed behind metallised windshield



PRI/22

EPL/278

BS ISO 24454:2008

PD ISO/IEC TR 18037:2008

Rubber. Acquisition and presentation of comparable multi-point data

Programming languages. C. Extensions to support embedded processors

DD CEN ISO/TS 12781-2:2007


supersedes PD ISO/IEC TR 18037:2004 ISBN 978 0 580 63686 8 £90.00 members, £180.00 non-members


PRI/22

IST/5

TDW/4

BS ISO 24453:2008

18


TDW/4

DD CEN ISO/TS 12781:— Geometrical product specifications (GPS). Flatness

Specification operators


DD ISO/TS 13473:— Characterization of pavement texture by use of surface profiles

DD ISO/TS 13473-4:2008 Spectral analysis of texture profiles no current standard is superseded ISBN 978 0 580 63521 2 £40.00 members, £80.00 non-members

PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published.

EH/1/2

KITS, SETS, PACKS AND SERIES KIT 201 Guide to statistical process control (SPC) charts for variables no current standard is superseded ISBN 978 0 580 50977 3 £117.00 members, £234.00 non-members SS/4

DD CEN ISO/TS 14253:— Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment

DD CEN ISO/TS 14253-3:2007 Guidelines for achieving agreements on measurement uncertainty statements no current standard is superseded ISBN 978 0 580 57994 3 £20.00 members, £40.00 non-members TDW/4

PAS 109:2008 Specification for the production of recycled gypsum from waste plasterboard no current standard is superseded ISBN 978 0 580 61729 4 Copies available free of charge from BSI Customer Services or download a copy from WRAP (the Waste & Resources Action Programme) at www.wrap.org.uk

SPECIALIST BOOKS FROM BSI

DD CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay and stone

BIP 0101:2008


no current standard is superseded ISBN 978 90 875308 15 £41.99 members, £41.99 non-members

ISO/IEC 20000: An Introduction

B/507

Special offer. Includes BS 5702-2:2008 and BS 5702:2008.

AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month.

BIP 0102:2008 DD ISO/PAS 30003:2008 Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management

Implementing ISO/IEC 20000 Certification: The Roadmap no current standard is superseded ISBN 978 90 875308 22 £31.99 members, £31.99 non-members

BS 6297:2007+A1:2008 Code of practice for the design and installation of drainage fields for use in wastewater treatment CORRIGENDUM 1


BIP 0103:2008

SME/32

ISO/IEC 20000: A Pocket Guide

BS 6622:2007

DD IEC/TS 62395:—


BIP 0104:2008

CORRIGENDUM 2

Electrical resistance trace heating systems for industrial and commercial applications

DD IEC/TS 62395-2:2008 Application guide for system design, installation and maintenance no current standard is superseded ISBN 978 0 580 56714 8 £75.00 members, £150.00 non-members PEL/27

B/505

Also incorporates Amendment 1.

ISO 9001:2000: The Quality Management Process no current standard is superseded ISBN 978 90 772127 76 £31.99 members, £31.99 non-members

BIP 0105:2008 Information Security based on ISO 27001/ISO 17799: A Management Guide

DD IEC/PAS 62443:— Security for industrial process measurement and control


Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods GEL/20/16

Also incorporates Corrigendum 1.

BS 7835:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods CORRIGENDUM 1 GEL/20/16

BS EN 1176:— DD IEC/PAS 62443-3:2008 Network and system security no current standard is superseded ISBN 978 0 580 62208 3 £65.00 members, £130.00 non-members AMT/7


BIP 0106:2008 Implementing Information Security based on ISO 27001/ISO 17799: A Management Guide no current standard is superseded ISBN 978 90 772127 83 £16.99 members, £16.99 non-members


Playground equipment and surfacing

BS EN 1176-1:2008 General safety requirements and test methods CORRIGENDUM 1 SW/65

19

Amendments to British Standards continued... BS EN 1176-2:2008 Additional specific safety requirements and test methods for swings CORRIGENDUM 1 SW/65

BS EN 1176-3:2008 Additional specific safety requirements and test methods for slides CORRIGENDUM 1 SW/65

UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately.

SPECIAL ANNOUNCEMENTS Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

BS EN 15838 Customer contact centres

BS EN 1176-4:2008 Additional specific safety requirements and test methods for cableways CORRIGENDUM 1 SW/65

BS EN 1176-5:2008

AMENDMENT 1 £40.00 members, £80.00 non-members

This European Standard has been issued as a Draft for Public Comment (08/30174497 DC). Please submit any comments by 31 October, 2008 via the new Draft Review System on the following website: www.bsigroup.com/drafts Contact: Sarah Horsfield Email: [email protected]

B/526

SVS/0/1

BS 8008:1996+A1:2008 Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes

Additional specific safety requirements and test methods for carousels CORRIGENDUM 1

BS EN 71:—

SW/65

Safety of toys

BS EN 1176-6:2008

BS EN 71-1:2005+A6:2008

Additional specific safety requirements and test methods for rocking equipment

Mechanical and physical properties

BSI British Standards Consumer & Public Interest Enthusiastic, informed people needed

CORRIGENDUM 1


SW/65

CW/15

Also incorporates Corrigendum 1 and Amendment 4.

BS EN 1176-7:2008 Guidance on installation, inspection, maintenance and operation

BS EN 289:2004+A1:2008 Plastics and rubber machines. Presses. Safety requirements

CORRIGENDUM 1 SW/65


BS ISO 3601:—

MCE/3/2

Fluid power systems. O-rings

BS ISO 3601-1:2008 Inside diameters, cross-sections, tolerances and designation codes CORRIGENDUM 1 MCE/11

BS EN 60901:1996+A4:2008 Single-capped fluorescent lamps. Performance specifications AMENDMENT 4 £123.00 members, £246.00 non-members CPL/34/1

Also incorporates Amendments 1, 2 & 3.

PAS 126:— Furniture removal activities. Commercial moving

Please

PAS 126-2:2008 Provision of the service CORRIGENDUM 1

do not send confirmation of orders placed by

e-mail your order [email protected]

20

telephone as it can lead to duplication


Are you committed to the principles of consumer involvement? Do you have the time to assist us (on a voluntary basis) in ensuring that the standards development process takes into account consumer and public interests? BSI British Standards’ Consumer & Public Interest Unit (CPIU) is looking for enthusiastic people, from all sorts of backgrounds, to join the CPI Network. We particularly need people with knowledge in one or more of the following topic areas: children’s interests, nanotechnology, services, security, and sustainability. Vacancies: The BSI CPIU is seeking to recruit: * CPI Representatives: Volunteers who contribute to the standards development process in a variety of ways: by attending meetings; working on projects; doing background research; or giving expert advice. They provide their time free, but have travel and subsistence expenses paid. * CPI Coordinators: They work with BSI staff on prioritising CPI input and coordinating Reps’ activity in their topic area. CPICs also often perform the Rep role themselves. They are volunteers who receive expenses and a small honorarium (presently £3,000 p.a.) in recognition of their increased responsibilities. The CPI Network also includes affiliated CPI Organizations and we are always happy to add new ones that are relevant to our work. Organizations can simply appoint a key contact or can nominate a person to be a CPI Representative. Contact CPIU BSI Consumer & Public Interest Unit BSI British Standards 389 Chiswick High Road London W4 4AL Tel: 020 8996 7754 Email: [email protected] www.bsigroup.com/consumers


BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard.

BS 215-2:1970

BS 2037:1994

Aluminium conductors, steel-reinforced

Specification for portable aluminium ladders, steps, trestles and lightweight stagings

GEL/20/16

B/512

BS 1070:1993 Specification for black paint (tar-based)

BS 2081:— Closets for use with chemicals

STI/27

BS 1088:—

BS 2081-1:1998

Marine plywood

Specification for portable closets B/505

BS 1088-1:2003 Requirements

BS 2081-2:1998

B/541

Specification for permanently installed closets B/505

A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 November, 2008.

BS 1088-2:2003 Determination of bonding quality using the knife test

BS 2482:1981

B/541

B/514

BS 1129:1990 Specification for portable timber ladders, steps, trestles and lightweight stagings

BS 5606:1990

B/512

Specification for timber scaffold boards

BS 2486:1997 Recommendations for treatment of water for steam boilers and water heaters CII/62

Guide to accuracy in building B/555

BS 1139:— Metal scaffolding

BS 2627:1970 Specification for wrought aluminium for electrical purposes. Wire

PD 6446:1970 Recommendations for the co-ordination of dimensions in building. Combinations of sizes

BS 1139-1.2:1990

B/555

B/514

GEL/20/16

Tubes. Specification for aluminium tube

BS 2846:— BS 6750:1986 Specification for modular coordination in building B/555

BS 1139-4:1982 Specification for prefabricated steel splitheads and trestles B/514

Guide to statistical interpretation of data

BS 2846-1:1991 Routine analysis of quantitative data SS/2

BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.

BS 1170:1983 Recommendations for treatment of water for marine boilers CII/62

BS 1196:1989 Specification for clayware field drain pipes and junctions B/505

BS 1425:— Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles

BS 1425-1:1991 Specification for fillings and stuffings other than feather and/or down

Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission

Specification for wrought aluminium for electrical purposes. Strip with drawn or rolled edges GEL/20/16

BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water STI/27

BS 3668:1963 Specification for red and green filters used in ophthalmic dichromatic and dissociation tests CH/172

TCI/66

BS 1434:1985 BS 215:—

BS 2897:1970

Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators

BS 3698:1964 Specification for calcium plumbate priming paints STI/27

NFE/34

BS 3728:1982 BS 215-1:1970

BS 1781:1981

Aluminium stranded conductors

Specification for linen and linen union textiles

Specification for size designation of children’s and infants’ wear

GEL/20/16

TCI/66

TCI/66



21

British Standards Reviewed and Confirmed continued... BS 3900:—

BS 4532:1969

BS 5335:—

Methods of test for paints

Specification for snorkels and face masks

Continental quilts

SW/136

BS 3900-A5:1991 Large-scale brushing tests for paints and varnishes STI/10

BS 3900-A11:1974

BS 5335-1:1991 BS 4569:1983 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface

BS 3900-B15:1987 Rapid method for estimation of lead in liquid paints

BS 5431:1976 BS 4578:1970 Specification for methods of test for hardness of, and for air flow through, infants’ pillows

NFE/34

BS 5438:1976 BS 4652:1995

Wet edge time

Specification for bending springs for use with copper tubes for water, gas and sanitation

TCI/66

STI/10

BS 3900-C1:1965

TCI/66

TCI/66/-/8

Small scale test for combustibility STI/10

Specification for quilts containing fillings other than feather and/or down

Specification for zinc-rich priming paint (organic media)

Methods of test for flammability of vertically oriented textile fabrics and fabric assemblies subjected to a small igniting flame TCI/66/-/8

STI/27

STI/10

BS 5438:1989 BS 3900-E7:1974 Resistance to impact (falling ball test) STI/10

BS 4723:2002 Stretch covers for upholstered furniture. Specification TCI/66

Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens TCI/66/-/8

BS 3900-E8:1974 Resistance to impact (pendulum test)

BS 4842:1984

Determination of resistance to humidity (cyclic condensation)

Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings

STI/10

STI/27

STI/10

BS 3900-F2:1973

BS 5446:— Fire detection and fire alarm devices for dwellings

BS 5446-2:2003 Specification for heat alarms FSH/12/2

BS 3900-F4:1968 Resistance to continuous salt spray

BS 4940:—

STI/10

Technical information on construction products and services

BS 3900-F5:1972

BS 4940-1:1994

Determination of light fastness of paints for interior use exposed to artificial light sources

Guide for management

BS 5561:1979 Specification for spools for copper wire NFE/34

B/500

BS 5651:1978

BS 3900-F10:1985

BS 4940-2:1994

Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies

Determination of resistance to cathodic disbonding of coatings for use in marine environments

Guide to content and arrangement

TCI/66/-/8

B/500

STI/10

BS 5651:1989

STI/10

BS 4940-3:1994 Guide to presentation

BS 3900-F11:1985 Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures STI/10

BS 3900-G6:1989 Assessment of resistance to fungal growth STI/10

B/500

Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies TCI/66/-/8

BS 5080:— Structural fixings in concrete and masonry

BS 5722:1984

BS 5080-1:1993

Specification for flammability performance of fabrics and fabric assemblies used in sleepwear and dressing gowns

Method of test for tensile loading

TCI/66/-/8

B/514

BS 3985:2003

BS 5722:1991

Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry

BS 5080-2:1986 Method for determination of resistance to loading in shear

Specification for flammability performance of fabrics and fabric combinations used in nightwear garments

CH/212

B/514

TCI/66/-/8

22



BS 5803:—

BS 6200-3.22.4:1997

PD 6682-2:2003

Thermal insulation for use in pitched roof spaces in dwellings

Determination of nitrogen. Thermal conductimetric method after fusion in a current of inert gas

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043

ISE/18

BS 5803-2:1985 Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing B/540

B/502

BS 6203:2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications

PD 6682-3:2003

PRI/26

B/502

BS 6270:—

BS 6753:1986

Code of practice for cleaning and surface repair of buildings

Specification for shotbolts (solenoid operated) for guarding machinery

Aggregates for mortar. Guidance on the use of BS EN 13139

BS 5803-3:1985 Specification for cellulose fibre thermal insulation for application by blowing B/540

MCE/3

BS 5803-4:1985 Methods for determining flammability and resistance to smouldering B/540

BS 5839:— Fire detection and alarm systems for buildings

BS 6270-3:1991 Metals (cleaning only)

BS 6915:2001

B/209

Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

BS 6313:2003 Micrographics. 35 mm microfilming of serials. Specification

FSH/12

BS 5892:—

BS 6949:1991

IDT/1/2

Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 6321:1982

STI/27

Specification for authorized signature lists and their representation on microfiche in bank operations

BS 7011:—

IST/12

Consumable accessories for light microscopes

BS 6463:—

BS 7011-0:1989

Quicklime, hydrated lime and natural calcium carbonate

General introduction

BS 5839-3:1988 Specification for automatic release mechanisms for certain fire protection equipment

B/542/11

Railway rolling stock materials

BS 5892-1:1992 Specification for axles for traction and trailing stock RAE/3/-/1

BS 6463-101:1996 Methods for preparing samples for testing B/516/11

BS 5950:— Structural use of steelwork in building

BS 5950-8:2003

BS 6001:— Sampling procedures for inspection by attributes

BS 6001-9:2002 Double sampling plans using minimal sample sizes, indexed by producer’s risk quality (PRQ) and consumer’s risk quality (CRQ)

BS 7011-2.1:1989 Slides. Specification for dimensions and optical properties CPW/172/5

BS 6469:— Insulating and sheathing materials of electric cables

BS 7012:— Light microscopes

Code of practice for fire resistant design B/525/31

CPW/172/5

BS 6469-99-1:1992 Test methods used in the United Kingdom but not specified in BS EN 60811. Non-electrical tests

BS 7012-0:1989 General introduction CPW/172/5

GEL/20/17

PD 6533:1993 Guide to methods for assessing the durability of geotextiles. An interim document

BS 7157:1989 Method of test for ignitability of fabrics used in the construction of large tented structures TCI/66/-/8

B/553

SS/5

BS 6658:1985

BS 7175:1989

Specification for protective helmets for vehicle users

Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources

PH/6

TCI/66/-/8

BS 6200-3:—

PD 6682:—

BS 7231:—

Methods of analysis

Aggregates

Body measurements of boys and girls from birth up to 16.9 years

BS 6200-3.11.3:1997

PD 6682-1:2003

Determination of cobalt. Flame atomic absorption spectrometric method

Aggregates for concrete. Guidance on the use of BS EN 12620

BS 7231-1:1990

ISE/18

B/502

TCI/66

BS 6200:— Sampling and analysis of iron, steel and other ferrous metals



Information in the form of tables

23

British Standards Reviewed and Confirmed continued... BS 7231-2:1990

BS 7505:1995

BS 7870-8.2:2003

Recommendations of body dimensions for children

Specification for the elastic properties of flat, non-adhesive, extensible fabric bandages

Single wire armoured and PVC sheathed multipair cable with copper conductors

TCI/66

CH/205/1

GEL/20/16

BS 7533:—

BS 7870-8.3:2003

Pavements constructed with clay, natural stone or concrete pavers

Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance

BS 7533-11:2003

GEL/20/16

BS 7255:2001 Code of practice for safe working on lifts MHE/4/1

BS 7317:— Methods for analysis of high purity copper cathode Cu-CATH-1

Code of practice for the opening, maintenance and reinstatement of pavements of concrete, clay and natural stone B/507/1

BS 7317-1:1990

BS 7870-8.4:2003 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance

Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic absorption spectrophotometry

BS 7837:1996

NFE/34

TCI/66/-/8

BS 7870-8.5:2003

BS 7317-2:1990

BS 7843:—

Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath

Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry

Guide to the acquisition and management of meteorological precipitation data

NFE/34

Specification for flammability performance for textiles used in the construction of marquees and similar textile structures

BS 7843-1:— Network design

GEL/20/16

GEL/20/16

BS 7870-8.6:2003 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors

BS 7317-3:1990

BS 7843-1.1:1996

Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation and atomic absorption spectrophotometry

Network design and monitoring CPI/113

BS 7884:1997

NFE/34

BS 7843-1.2:1996

Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems

The user requirement for precipitation data

BS 7317-4:1990 Method for determination of antimony, arsenic, bismuth, lead, selenium, tellurium and tin by electrothermal atomization atomic absorption spectrophotometry NFE/34

CPI/113

BS 7843-2:— Field practices and data management

BS 7843-2.1:1996

GEL/20/16

NFE/34

BS 7903:1997 Guide to selection and use of gully tops and manhole covers for installation within the highway B/505

Technical aspects in the field

BS 7317-5:1990

CPI/113

Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry

BS 7843-2.2:1996

NFE/34

Methods of observation and data tabulation

BS 7928:1998 Specification for head protectors for cricketers

CPI/113

BS 7317-6:1990

PH/6

DD 7971:— Protective clothing and equipment for use in violent situations and in training

Method for determination of phosphorus and silicon by spectrophotometry

BS 7843-2.3:1996

NFE/34

CPI/113

BS 7317-7:1990

BS 7843-2.4:1996

Training suits and equipment. Requirements and test methods

Method for determination of lead by lanthanum hydroxide separation and atomic absorption spectrophotometry

Areal rainfall

PH/3/12

NFE/34

Data management

CPI/113

BS 7870:—

BS 7354:1990

LV and MV polymeric insulated cables for use by distribution and generation utilities

Code of practice for design of high-voltage open-terminal stations

BS 7870-8:—

PEL/17/1

BS 7460:1991

DD 7971-9:2005

Specification for multicore and multipair cables for installation above and below ground

BS 7972:2001 Safety requirements and test methods for children’s bedguards for domestic use CW/41

BS 7977:— Specification for safety and rational use of energy of domestic gas appliances

Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals

BS 7870-8.1:2003 Single wire armoured and PVC sheathed multicore cable with copper conductors

BS 7977-2:2003

CPL/61/10

GEL/20/16

GSE/36

24


Combined appliances. Gas fire/back boiler


BS 8409:2002

BS ISO 14808:1997

BS 6102-1:1992

Soft indoor play areas. Code of practice

Photography. Composition of 135-film canisters

SW/65

CPW/42

Specification for safety requirements for bicycles

BS 8420:2003

BS ISO 17058:2004

Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges

Steel and iron. Determination of arsenic content. Spectrophotometric method

GME/25

ISE/18

This standard has been proposed for obsolescence as it is partially replaced by BS EN 14766:2005, BS EN 14781:2005 and BS EN 14764:2005 but cited in the Pedal Bicycle (Safety) Regulations 2003

B/510/5

BS ISO 18932:2005 BS 8422:2003 Force measurement. Strain gauge load cell systems. Calibration method IS/NFE/4/1/1

BS 8426:2003 A code of practice for e-support in e-learning systems IST/43

Imaging materials. Adhesive mounting systems. Specifications CPW/42

PD 0026:2003 Software and systems quality framework. A guide to the use of ISO/IEC and other standards for understanding quality in software and systems

BS MA 2:—

Estate agency services. Residential property sales. Specification for the provision of the service

Magnetic compasses and binnacles

SVS/7/-/1

Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)

Graphical symbols and signs. Creation and design of public information symbols. Requirements PH/8/2

Specification for portable fire extinguishers for use in aircraft FSH/2

This standard has been proposed for obsolescence as the technology is not current but the document should be retained and in the review cycle to provide for the servicing of existing equipment that is expected to have a long working life

IST/15

DD 8464:2005

BS 8502:2003

BS 7867:1997

BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets FSH/2

BS MA 2-1:1985

EPL/80

This standard has been proposed for obsolescence as the test methods described in the standard are out of date and new test method data is currently not available. The standard is currently not being used to test against

BS MA 2-4:1985 Glossary of terms

BS EN ISO 3977:—

BRITISH STANDARDS DECLARED OBSOLESCENT

EPL/80

Gas turbines. Procurement

BS MA 2-8:1985 BS EN ISO 3977-5:2003 Applications for petroleum and natural gas industries

Specification for transmitting systems and offcourse alarms for class A magnetic compasses EPL/80

MCE/16

BS EN 14197:— Cryogenic vessels. Static non-vacuum insulated vessels

BS EN 14197-3:2004 Operational requirements PVE/18

BS ISO 1008:1992 Photography. Paper dimensions. Pictorial sheets

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

CPW/42

BS ISO 1222:2003 Photography. Tripod connections CPW/42

BS ISO 12231:2005

A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 November, 2008.

Photography. Electronic still picture imaging. Vocabulary CPW/42

ISE/18


IDT/2/2

This standard has been declared obsolescent because it was designed for the manual sorting of library catalogue cards in anglophone countries according to combined alphanumeric and semantic criteria, and cannot be used for electronic sorting on the basis of its provisions alone. BS ISO 999 already provides implementable guidelines for electronic sorting of characters in Roman alphabets, and is compatible with the Unicode Collation Algorithm [Unicode TS#10] and other recognised sort standards

Tube and pipe fittings for engineering purposes

BS 2051-1:1973

BS 6102-1:1981 Specification for safety requirements for bicycles GME/25

Determination of W content

Recommendations for alphabetical arrangement and the filing order of numbers and symbols

BS 6102:— Cycles

DD ISO/TS 13899-3:2005

BS 1749:1985

BS 2051:—

DD ISO/TS 13899:— Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

This standard has been proposed for obsolescence as it is revised by BS 6102-1:1992 but cited in the Pedal Bicycle (Safety) Regulations 2003


Copper and copper alloys capillary and compression tube fittings for engineering purposes NFE/34

This standard has been re-declared as obsolescent for a further period as it is now used only for replacement parts. BS EN 1254-2:1998 is now used for new manufacture

25

British Standards Declared Obsolescent continued... BS 2051-2:1984

BS 3288:—

BS 6616:1986

Specification for olive type copper alloy compression tube fittings

Insulator and conductor fittings for overhead power lines

Specification for paper and print for optical character recognition (OCR)

NFE/34

This standard has been re-declared as obsolescent for a further period as it is used only for replacement parts. BS EN 1254-2:1998 is now used for new manufacture

IST/12

BS 3288-3:1989 Dimensions of ball and socket couplings of string insulator units PEL/11

This standard has been re-declared as obsolescent for a further period as it is no longer relevant

BS 2520:1983 Specification for barometer conventions and tables, their application and use SS/7

This standard has been declared obsolescent as the data contained in BS 2520:1983 is correct and still relevant for calibration of mercury barometers as originally intended. However, some of the textual references are out of date and it is has limited applicability to modern technology. The responsible committee decided that the standard will no longer be updated but will be retained to provide for the servicing of existing equipment that is expected to have a long working life

PD 2777:1994 Fabric flammability and burning accidents TCI/66/-/8


BS 2782:— Methods of testing plastics

BS 4505:—

Mechanical properties. Stiffness of plastics film PRI/21


BS 4505-6:1976 Complements to the basic mode control procedures; recovery, abort and interrupt, multiple station selection

Chemical properties

BS 2782-4:Method 451B:1978 Determination of acetone-soluble matter in phenolic moulding materials after moulding PRI/21


This standard has been re-declared as obsolescent following the reinstatement of ISO 2628 from withdrawn status to current status

BS 4505-7:1976 Basic mode control procedures; conversational information message transfer IST/6

This standard has been re-declared as obsolescent following the reinstatement of ISO 2629 from withdrawn status to current status

BS 5332:1982 Specification for data elements for the generation and exchange of serials records IDT/2/7

This standard has been declared obsolescent as it will be replaced by BS EN 200 which is due to be published later in 2008

BS 5477:1977 Method for visual assessment, by grid assay, of dirt in paper for character recognition IST/12

This standard has been re-declared as obsolescent as it is not believed to be in wide current usage

PRI/21

IDT/2/7



BS 6529:1984

26

Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring GEL/20/16

This standard has been declared obsolescent as there is no longer market demand and relevance

BS 7870-7.2:2003 Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring GEL/20/16


MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV

Specification for serials holdings statements for libraries and documentation centres


BS 7870-7.1:2003

BS 7894:2003

BS 5999:1980

PRI/21

Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations

Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and 3/4) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0.1 bar)

Determination of butyl rubber content of low density polyethylene compounds

Optical and colour properties, weathering. Determination of yellowness index. Determination of the colour of near-white or near-colourless materials

BS 7870-7:—

BS 5412:1996

BS 2782-4:Method 452C:1979

BS 2782-5:Methods 530A and 530B:1976

LV and MV polymeric insulated cables for use by distribution and generation utilities

IST/6

B/504

BS 2782-4:—

BS 7870:—

Digital data transmission


BS 2782-3:Method 332A:1976

This standard has been re-declared as obsolescent as it is not believed to be in wide current usage

Recommendations for examining documents, determining their subjects and selecting indexing terms

GEL/20/16


BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 November, 2008. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

IDT/2/2

BS 2740:1969

This standard has been declared obsolescent because it covers indexing using a thesaurus. Indexing aspects are already largely superseded by BS ISO 999, and the provisions on thesaurus maintenance are superseded by BS 8723-2:2005

Specification for simple smoke alarms and alarm metering devices


EH/2/1

This standard has been proposed for withdrawal as it is no longer relevant


BS 2741:1969

BS 1042-2.3:1984

BS 4737:—

Recommendations for the construction of simple smoke viewers

Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes

Intruder alarm systems

CPI/30

BS 4737-3.11:1978

Superseded by BS ISO 7194:2008

Specifications for components. Rigid printedcircuit wiring

EH/2/1


BS 1042-2.4:1989 BS 2811:1969 Specification for smoke density indicators and recorders

Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions

EH/2/1

CPI/30



GW/1

This standard has been withdrawn as it is no longer relevant

BS 5724:— Medical electrical equipment

BS 2975:1988

BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn

Methods for sampling and analysis of glassmaking sands LBI/36

Superseded by BS 2975-1:2004 and BS 2975-2:2008

BS 5724-3.1:Supplement No. 1:1990 Particular requirements for performance. Methods of declaring functional performance characteristics of medical electron accelerators in the range 1 MeV to 50 MeV. Guide to functional performance values

BS 3169:1986

CH/62/3

Specification for first aid reel hoses for firefighting purposes

Superseded by PD IEC/TR 60977:2008

FSH/17

BS 684:—

Superseded by BS EN 694:2001 and BS EN 1947:2002

Methods of analysis of fats and fatty oils

BS 4305:— BS 684-2.1:1996

Baths for domestic purposes made of acrylic material

Other methods. Determination of water by the Karl Fischer method AW/307

Superseded by BS EN ISO 8534:2008

BS 4305-1:1989 Specification for finished baths

BS 7520:1995 Guide to quality assurance plans for tools for live working PEL/78

Superseded by BS EN 61318:2008

BS 7564:— Tools for moulding

B/503


BS 903:—

Specification for dimensions of support pillars

Physical testing of rubber

BS 903-3:2003 Acquisition and presentation of comparable single-point data PRI/22

BS 7564-10:1993 MTE/12

WITHDRAWN STANDARDS


BS 7568:— Press tools


BS 7568-7:1992 Round punches with 60° conical head and straight shank

BS 903-4:2003 Acquisition and presentation of comparable multi-point data

MTE/12


PRI/22


BS 7568-12:1992 BS 903-A1:1996 Determination of density

Elastomer pressure springs. General specification

PRI/22

MTE/12


Superseded by BS ISO 10069-1:2008

BS 1042:—

BS 7568-13:1992

Measurement of fluid flow in closed conduits

Elastomer pressure springs. Specification of accessories MTE/12

BS 1042-2:—


Velocity area methods

For further information visit BS 1042-2.1:1983 Method using Pitot static tubes CPI/30



www.bsigroup.com/ withdrawn Prices may be subject to change.

BS 7997:2003 Products for tactile paving surface indicators. Specification B/507/5

Superseded by DD CEN/TS 15209:2008

27

British Standards Withdrawn continued... BS 8103:—

BS EN 13220:1999

BS EN 50338:2001

Structural design of low-rise buildings

Flow-metering devices for connection to terminal units of medical gas pipeline systems

Safety of household and similar electrical appliances. Particular requirements for pedestrian controlled battery powered electrical lawn-mowers

BS 8103-2:1996 Code of practice for masonry walls for housing

CH/121/6


Superseded by BS 8103-2:2005

BS EN 285:1997 Sterilization. Steam sterilizers. Large sterilizers LBI/35

BS EN 13904:2003 Low resistance shower outlets for sanitary tapware B/504/8

Electrical apparatus for explosive gas atmospheres

BS EN 60079-0:2004 BS EN 13905:2003

Medical gas pipeline systems

BS EN 60079:—


Superseded by BS EN 285:2006+A1:2008

BS EN 737:—

CPL/61


B/525

Low resistance shower hoses for sanitary tapware

General requirements GEL/31

Superseded by BS EN 60079-0:2006

B/504/8

BS EN 737-1:1998 Terminal units for compressed medical gases and vacuum CH/121/6

Superseded by BS EN ISO 9170-1:2008

BS EN 737-4:1998 Terminal units for anaesthetic gas scavenging systems CH/121/6


BS EN 993:— Methods of test for dense shaped refractory products


BS EN 60431:1997

DD CEN/TS 15451:2006

Specification for dimensions of square cores (RM-cores) made of magnetic oxides and associated parts

Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography CII/37


EPL/51


BS EN 60519:— Safety in electroheat installations

DD CEN/TS 15452:2006

BS EN 60519-9:1996

Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC

Particular requirements for high-frequency dielectric heating installations PEL/27

CII/37



BS EN 60730:— BS EN 993-8:1997 Determination of refractoriness-under-load RPI/1


BS EN 27326:1993 Rubber and plastics hoses. Assessment of ozone resistance under static conditions PRI/66


BS EN 993-20:2004 Determination of resistance to abrasion at ambient temperature

Specification for automatic electrical controls for household and similar use

BS EN 60730-2-12:1994 Particular requirements. Electrically operated door locks CPL/72

BS EN 50264:—

Superseded by BS EN 60730-2-12:2006

Railway applications. Railway rolling stock cables having special fire performance. Standard wall

BS EN 60871:—

Dentistry. Denture base polymers

BS EN 50264-2:2002

BS EN 60871-1:1998

CH/106/2

Single core cables


GEL/20/12

General, testing and rating. Safety requirements. Guide for installation and operation

RPI/1


Shunt capacitors for A.C. power systems having a rated voltage above 1 kV

BS EN ISO 1567:2001


PEL/33

BS EN 1733:2002


Suction catheters for use in the respiratory tract

BS EN 50264-3:2002

CH/121/5

Multicore cables


GEL/20/12


do not send

BS EN 12010:1998 Non-active surgical implants. Joint replacement implants. Particular requirements CH/150/4


BS EN 50281:— Electrical apparatus for use in the presence of combustible dust

BS EN 50281-1-1:1999

Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants

Electrical apparatus protected by enclosures. Construction and testing

CH/150/4

Superseded by BS EN 61241-0:2006 and BS EN 61241-1:2004

28

confirmation of orders placed by

BS EN 12564:1999


Please

GEL/31/20




BS EN 130101:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level E EPL/40X


BS EN 130102:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. Assessment level EZ EPL/40X


BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 November, 2008, in order to be considered by the relevant UK Committee.

BS EN 130500:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current

BS EN 130501:1998

Methods for measurement of air pollution

BS 1747-12:1993 (ISO 10313:1993)

EH/2/3

Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method

BS 6023:1981 (ISO 6552:1980) Glossary of technical terms for automatic steam traps PSE/7/8

BS 6068-2:— Physical, chemical and biochemical methods

BS 2922:—

Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry

Strength of wet paper and board

EH/3/2

Method for determination of the bursting strength of paper and board after immersion in water I/-

BS 6068-2.43:1993 (ISO 9964-2:1993) Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry EH/3/2

Connectors for ground electrical supplies for aircraft

BS 2922-2:1984 (ISO 3781:1983)

ACE/6

Method for determination of the tensile strength of paper and board after immersion in water I/-

BS QC 300101:1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polyethylene-terephthalate film dielectric metal foil D.C. capacitors. Assessment level E

BS 5686:1986 (ISO 14:1982)

BS 6068-2.42:1993 (ISO 9964-1:1993)

BS 2922-1:1985 (ISO 3689:1983)


Size designation of clothes. Headwear

EH/2/3


BS 4G 173-1:1985

BS 5592:1978 (ISO 4417:1977)

Water quality

BS 1747-13:1994 (ISO 9855:1993)

IDT/2/15

Specification for design, performance and test requirements

MCE/2

BS 6068:—

PD ISO/TR 20983:2003

BS 4G 173:—

Woodruff keys and keyways

MCE/2

BS ISO 12649:2004

Information and documentation. Performance indicators for electronic library services

BS 4235-2:1977 (ISO 3912:1977)

Determination of a black smoke index in ambient air

Determination of the mass concentration of ozone in ambient air: chemiluminescence method

Superseded by BS ISO 12643-1:2007 and BS ISO 12643-3:2008

Specification for metric keys and keyways

Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements

EPL/40X

PAI/43

BS 4235:—

BS 1747-11:1993 (ISO 9835:1993)

EH/2/3

Graphic technology. Safety requirements for binding and finishing systems and equipment

MTE/1

BS 1747:—

Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level E Superseded by BS EN 60384-6-1:2005

Glossary for power presses, open front mechanical type

TCI/66

EPL/40X


BS 4184:1994 (ISO 8540:1993)

BS 6068-2.44:1993 (ISO 9964-3:1993) Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry EH/3/2

BS 3643:— ISO metric screw threads

BS 6068-2.45:1993 (ISO 9965:1993) BS 3643-1:2007

EPL/40X

Principles and basic data

Determination of selenium by atomic absorption spectrometry


FME/9/3

EH/3/2



29

British Standards Under Review continued... BS 6068-4.12:1998 (ISO 11731:1998) Microbiological methods. Detection and enumeration of Legionella EH/3/4

BS 6913:— Operation and maintenance of earth-moving machinery

BS 6913-9:1994 (ISO 6405-2:1993)

BS 6068-6:—

BS 7707:1993 (ISO 9188:1993) Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force MTE/1

Specification for specific symbols for machines, equipment and accessories

Sampling

B/513/1

BS 6068-6.7:1994 (ISO 5667-7:1993)

BS 7708:1993 (ISO 9189:1993)

Guidance on sampling of water and steam in boiler plants

BS 6913-10:1994 (ISO 6302:1993)

Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force

EH/3/6

Specification for drain, fizz and level plugs

MTE/1

B/513/1

BS 6068-6.8:1993 (ISO 5667-8:1993) Guidance on sampling of wet deposition EH/3/6

BS 6068-6.10:1993 (ISO 5667-10:1992)

BS 6913-11:1994 (ISO 11862:1993) Specification for auxiliary starting aid electrical connector

Soil quality

B/513/1

BS 7755-3.1:1994 (ISO 11465:1993)

BS 7034:—

Chemical methods. Determination of dry matter and water content on a mass basis by a gravimetric method

Guidance on sampling of waste waters EH/3/6

BS 7755:—

Viscosity and viscometric fixed points of glass

EH/4

BS 6114:1987 (ISO 6484:1986) Method for measurement of volumetric ratings of elevating scrapers used for earth-moving B/513/1

BS 7034-1:1988 (ISO 7884-1:1987) Recommendations for use in the determination of viscosity and viscometric fixed points

BS 7755-4:— Biological methods

LBI/36

BS 6911:— Testing earth-moving machinery

BS 7440:1991 (ISO 9059:1990)

BS 6911-7:1992 (ISO 9248:1992) Specification for units of measurement and tolerances

Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer RHE/25

B/513/1

BS 7471:1991 (ISO 3730:1988)

BS 6911-8:1993 (ISO 10266:1992)

BS 7755-4.2:— Effects of pollutants on soil fauna

BS 7755-4.2.1:1994 (ISO 11268-1:1993) Determination of acute toxicity to earthworms (Eisenia fetida) using artificial soil substrate EH/4

Specification for mooring winches

Determination of slope limits for machine fluid systems operation (static test method) B/513/1

SME/32

BS 7603:1992 (ISO 4790:1992)

BS 6911-12:1998 (ISO 7457:1997)

Method for determination of stresses in glassto-glass sealings

Determination of turning dimensions of wheeled machines

BS 7755-4.2.2:1998 (ISO 11268-2:1998) Determination of effects on reproduction on earthworms (Eisenia fetida) EH/4

LBI/36

BS 7755-5:—

B/513/1

BS 7604:— BS 6912:— Safety of earth-moving machinery

BS 6912-11:1993 (ISO 10533:1993)

BS 7604-1:1992 (ISO 10345-1:1992)

Requirements for lift arm support devices

Tensile test

B/513/1

LBI/36

BS 7604-2:1992 (ISO 10345-2:1992) Bending test e-mail

Physical methods

Method for determination of stress-optical coefficient of glass

BS 7755-5.3:1998 (ISO 11508:1998) Determination of particle density EH/4

BS 7755-5.5:1999 (ISO 11274:1998) Laboratory methods EH/4

LBI/36

your order [email protected]

30

BS 7614:1992 (ISO 9961:1992)

BS 7755-5.6:1999 (ISO 11272:1998)

Specification for natural tracing paper

Determination of dry bulk density

TDW/4

EH/4



BS EN ISO 140:—

BS EN ISO 4157-2:1999

BS EN ISO 7965:—

Acoustics. Measurement of sound insulation in buildings and of building elements

Room names and numbers

Sacks. Drop test

B/555

BS EN ISO 7965-2:1997 BS EN ISO 140-4:1998 Field measurements of airborne sound insulation between rooms EH/1

BS EN ISO 4157-3:1999 Room identifiers

Sacks made from thermoplastic flexible film PKW/0

B/555

BS EN ISO 7998:2005 BS EN ISO 140-5:1998

BS EN ISO 5495:2007

Field measurements of airborne sound insulation of facade elements and facades

Sensory analysis. Methodology. Paired comparison test

EH/1

AW/12

Ophthalmic optics. Spectacle frames. Lists of equivalent terms and vocabulary CH/172

BS EN ISO 8099:2001 BS EN ISO 140-7:1998 Field measurements of impact sound insulation of floors EH/1

BS EN ISO 898:— Mechanical properties of fasteners made of carbon steel and alloy steel

BS EN ISO 898-5:1999 Set screws and similar threaded fasteners not under tensile stresses FME/9/1

Small craft. Toilet waste retention systems

BS EN ISO 5778:2000

GME/33

Ships and marine technology. Small weathertight steel hatches SME/32

BS EN ISO 6042:2000 Ships and marine technology. Weathertight single-leaf steel doors SME/32

BS EN ISO 6115:1997 Shipbuilding. Trawl winches SME/32

BS EN ISO 1042:2000

BS EN ISO 8362:— Injection containers and accessories

BS EN ISO 8362-1:2004 Injection vials made of glass tubing CH/212

BS EN ISO 8362-4:2004 Injection vials made of moulded glass CH/212

BS EN ISO 8367:—

Laboratory glassware. One-mark volumetric flasks

BS EN ISO 6185:—

LBI/36

Inflatable boats

BS EN ISO 1127:1997

BS EN ISO 6185-1:2001

Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length

Boats with a maximum motor power rating of 4,5 kW

ISE/8

GME/33

Packaging. Dimensional tolerances for general purpose sacks

BS EN ISO 8367-1:1997 Paper sacks PKW/0

BS EN ISO 8367-2:1997 BS EN ISO 3071:2006 Textiles. Determination of pH of aqueous extract TCI/80

BS EN ISO 3449:2005 Earth-moving machinery. Falling object protective structures. Laboratory tests and performance requirements

BS EN ISO 6185-2:2001 Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive GME/33

Non-destructive testing. Penetrant testing

BS EN ISO 3452-3:1999 Reference test blocks WEE/46

BS EN ISO 8388:2003 TCI/66

Dentistry. Polymer-based pit and fissure sealants CH/106/1

BS EN ISO 8655:— Piston-operated volumetric apparatus

BS EN ISO 7225:2007 Gas cylinders. Precautionary labels

BS EN ISO 8655-7:2005

PVE/3/7

Non-gravimetric methods for the assessment of equipment performance LBI/36/1

BS EN ISO 7488:1996 Dental amalgamators

BS EN ISO 8861:1998

CH/106/4

Shipbuilding. Engine-room ventilation in dieselengined ships. Design requirements and basis of calculations

BS EN ISO 7518:1999

SME/32

BS EN ISO 3452-4:1999 Equipment

PKW/0

Knitted fabrics. Types. Vocabulary

BS EN ISO 6874:2005

B/513/1

BS EN ISO 3452:—

Sacks made from thermoplastic flexible film

WEE/46

Construction drawings. Simplified representation of demolition and rebuilding

BS EN ISO 4157:—

B/555

BS EN ISO 8871:— Elastomeric parts for parenterals and for devices for pharmaceutical use

Construction drawings. Designation systems

BS EN ISO 7944:1998 Optics and optical instruments. Reference wavelengths

BS EN ISO 8871-1:2004

Buildings and parts of buildings B/555

CPW/172

CH/212

BS EN ISO 4157-1:1999



Extractables in aqueous autoclavates

31

British Standards Under Review continued... BS EN ISO 8871-2:2004

BS EN ISO 11140:—

BS EN ISO 13753:1999

Identification and characterization CH/212

Sterilization of health care products. Chemical indicators

Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

BS EN ISO 8871-3:2004

BS EN ISO 11140-1:2005

Determination of released-particle count


CH/212

LBI/35

GME/21/6

BS EN ISO 13929:2001 BS EN ISO 9000:2005

BS EN ISO 11812:2002

Quality management systems. Fundamentals and vocabulary

Small craft. Watertight cockpits and quickdraining cockpits

QS/1

GME/33

BS EN ISO 9283:1998 Manipulating industrial robots. Performance criteria and related test methods

BS EN ISO 12947:— Textiles. Determination of the abrasion resistance of fabrics by the Martindale method

Small craft. Steering gear. Geared link systems GME/33

BS EN ISO 14024:2001 Environmental labels and declarations. Type I environmental labelling. Principles and procedures SES/1/3

AMT/-/2

BS EN ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles

BS EN ISO 12947-1:1998 Martindale abrasion testing apparatus

BS EN ISO 14184:— Textiles. Determination of formaldehyde

TCI/24

CPI/30/2

BS EN ISO 12947-2:1998 BS EN ISO 9687:1996

Determination of specimen breakdown

Dental equipment. Graphical symbols

TCI/24

BS EN ISO 14184-1:1999 Free and hydrolyzed formaldehyde (water extraction method) TCI/80

CH/106/4

BS EN ISO 12947-3:1998 BS EN ISO 9873:2000

Determination of mass loss

BS EN ISO 14184-2:1998

Dental hand instruments. Reusable mirrors and handles

TCI/24

Released formaldehyde (vapour absorption method)

CH/106/4

TCI/80

BS EN ISO 12947-4:1998 BS EN ISO 10273:2003

Assessment of appearance change

Microbiology of food and animal feeding stuffs. Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica

TCI/24

AW/9

BS EN ISO 10306:1995 Textiles. Cotton fibres. Evaluation of maturity by the air flow method

BS EN ISO 14698:—

BS EN ISO 13090:— Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people

BS EN ISO 13090-1:1998

TCI/24

Exposure to whole-body mechanical vibration and repeated shock

BS EN ISO 10426:—

GME/21/6

Petroleum and natural gas industries. Cements and materials for well cementing

BS EN ISO 10426-3:2004

BS EN ISO 13503:— Petroleum and natural gas industries. Completion fluids and materials

Testing of deepwater well cement formulations PSE/17/-/3

BS EN ISO 10534:— Acoustics. Determination of sound absorption coefficient and impedance in impedance tubes

BS EN ISO 10534-2:2001 Transfer-function method

BS EN ISO 13503-1:2005 Measurement of viscous properties of completion fluids

Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents

General principles and methods LBI/30

BS EN ISO 14815:2005 Road transport and traffic telematics. Automatic vehicle and equipment identification. System specifications EPL/278

BS EN ISO 14915:— Software ergonomics for multimedia user interfaces

BS EN ISO 14915-2:2003 BS EN ISO 13567:— Technical product documentation. Organization and naming of layers for CAD

Multimedia navigation and control PH/9

BS EN ISO 15584:2001 BS EN ISO 13567-1:2002 Overview and principles TDW/4

BS EN ISO 11114-4:2005

BS EN ISO 13567-2:2002

Test methods for selecting metallic materials resistant to hydrogen embrittlement

Concepts, format and codes used in construction documentation

PVE/3/1

TDW/4

32

BS EN ISO 14698-1:2003

PSE/17/-/3

EH/1/6

BS EN ISO 11114:—

Cleanrooms and associated controlled environments. Biocontamination control


Small craft. Inboard petrol engines. Enginemounted fuel and electrical components GME/33

BS EN ISO 15867:2003 Intermediate bulk containers (IBCs) for nondangerous goods. Terminology PKW/0


BS EN ISO 15927:—

BS EN ISO 21007:—

Hygrothermal performance of buildings. Calculation and presentation of climatic data

Gas cylinders. Identification and marking using radio frequency identification technology

BS EN ISO 15927-4:2005

BS EN ISO 21007-1:2005

Hourly data for assessing the annual energy use for heating and cooling

Reference architecture and terminology PVE/3/7

B/540

BS EN ISO/IEC 17040:2005 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies

Determination of 62 elements EH/3/2

BS EN ISO 18153:2003 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials CH/212

BS EN 27023:1993 (ISO 7023:1983)

Numbering schemes for radio frequency identification

PKW/0

PVE/3/7

BS EN 27841:1991 (ISO 7841:1988) Food safety management systems. Requirements for any organization in the food chain AW/90

BS EN ISO 17294-2:2004 (BS 6068-2.89:2004)

PSE/7/8

Packaging. Sacks. Method of sampling empty sacks for testing

BS EN ISO 22000:2005 Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS)

Specification for production and performance characteristic tests for automatic steam traps

BS EN ISO 21007-2:2005

CAS/1

BS EN ISO 17294:—

BS EN 26948:1991 (ISO 6948:1981)

BS EN ISO 22254:2005 Manual toothbrushes. Resistance of tufted portion to deflection

Methods for determination of steam loss of automatic steam traps PSE/7

BS EN 27842:1991 (ISO 7842:1988) Methods for determination of discharge capacity of automatic steam traps PSE/7

CH/106/7

BS EN 27965:— BS EN ISO 22374:2005 Dentistry. Dental handpieces. Electrical-powered scalers and scaler tips CH/106/4

Packaging. Sacks. Drop test

BS EN 27965-1:1993 (ISO 7965-1:1984) Paper sacks

BS EN 26553:1991 (ISO 6553:1980)

PKW/0

Specification for marking of automatic steam traps

BS EN 28848:1993

Rail systems for supporting medical equipment CH/121/6

PSE/7/8

GME/33

BS EN ISO 19901:—

BS EN 26554:1991 (ISO 6554:1980)

BS EN 50153:2002

BS EN ISO 19054:2006

Petroleum and natural gas industries. Specific requirements for offshore structures

BS EN ISO 19901-4:2003 Geotechnical and foundation design considerations B/525/12

Specification for face-to-face dimensions for flanged automatic steam traps

Small craft. Remote steering systems

Railway applications. Rolling stock. Protective provisions relating to electrical hazards GEL/9/2

PSE/7/8

BS EN 50311:2003 BS EN 26590:— Packaging. Sacks. Vocabulary and types

Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps GEL/9

BS EN ISO 19901-5:2003

BS EN 26590-1:1993

Weight control during engineering and construction

Paper sacks PKW/0

B/525/12

BS EN 50343:2003 Railway applications. Rolling stock. Rules for installation of cabling GEL/9

BS EN ISO 19980:2005 Ophthalmic instruments. Corneal topograpers

BS EN 26591:— Packaging. Sacks. Description and method of measurement

CH/172/6

BS EN 26591-1:1993 BS EN ISO 20126:2005

Empty paper sacks

Dentistry. Manual toothbrushes. General requirements and test methods

PKW/0

CH/106/7

BS EN 80416:— Basic principles for graphical symbols for use on equipment

BS EN 80416-3:2003 Guidelines for the application of graphical symbols PH/8

BS EN 26599:— Packaging. Sacks. Conditioning for testing

DD CEN ISO/TS 20836:2005

BS ISO 68:— ISO general purpose screw threads. Basic profile

Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of thermal cyclers

BS EN 26599-1:1993 (ISO 6599-1:1983)

BS ISO 68-1:1998

Paper sacks

Metric screw threads

AW/9

PKW/0

FME/9/3



33

British Standards Under Review continued... BS ISO 68-2:1998

BS ISO 1940:—

BS ISO 4266:—

Inch screw threads

Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state

Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods

FME/9/3

BS ISO 261:1998

BS ISO 1940-1:2003

ISO general purpose metric screw threads. General plan

Specification and verification of balance tolerances

FME/9/3

GME/21/8

PTI/12

BS ISO 3057:1998

BS ISO 4266-2:2002

Non-destructive testing. Metallographic replica techniques of surface examination

Measurement of level in marine vessels

BS ISO 262:1998 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts

BS ISO 4266-1:2002 Measurement of level in atmospheric tanks

PTI/12

WEE/46

FME/9/3

BS ISO 3058:1998 BS ISO 639:— Codes for the representation of the names of languages

BS ISO 639-2:1998 Alpha-3 code

Non-destructive testing. Aids to visual inspection. Selection of low-power magnifiers WEE/46

BS ISO 4266-3:2002 Measurement of level in pressurized storage tanks (non-refrigerated) PTI/12

BS ISO 3585:1998

BS ISO 4266-4:2002

Borosilicate glass 3.3. Properties

Measurement of temperature in atmospheric tanks

LBI/36

TS/1

PTI/12

BS ISO 4121:2003 BS ISO 965:— ISO general purpose metric screw threads. Tolerances

BS ISO 965-1:1998 Principles and basic data

Sensory analysis. Guidelines for the use of quantitative response scales

BS ISO 4266-5:2002

AW/12

PTI/12

BS ISO 4141:— Road vehicles. Multi-core connecting cables

FME/9

BS ISO 4141-1:2005 BS ISO 965-2:1998

AUE/16

FME/9

BS ISO 4156:— Straight cylindrical involute splines. Metric module, side fit

PTI/12

BS ISO 4306:—

BS ISO 4306-5:2005 Bridge and gantry cranes MHE/3/3

BS ISO 4156-1:2005 Generalities MCE/2

BS ISO 4800:1998 Laboratory glassware. Separating funnels and dropping funnels

BS ISO 965-4:1998 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

Measurement of temperature in pressurized storage tanks (non-refrigerated)

Cranes. Vocabulary

Deviations for constructional screw threads FME/9/3

BS ISO 4266-6:2002

Test methods and requirements for basic performance sheathed cables

Limits of sizes for general purpose external and internal screw threads. Medium quality

BS ISO 965-3:1998

Measurement of temperature in marine vessels

BS ISO 4156-2:2005

LBI/36/2

Dimensions MCE/2

BS ISO 5626:1993

FME/9/3

Paper. Determination of folding endurance

BS ISO 4156-3:2005 BS ISO 965-5:1998

Inspection

Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

MCE/2

I/-

BS ISO 5667:— BS ISO 4251:—

FME/9/3

Tyres (ply rating marked series) and rims for agricultural tractors and machines

BS ISO 1924:—

BS ISO 4251-1:2005

Paper and board. Determination of tensile properties

Tyre designation and dimensions, and approved rim contours

Water quality. Sampling

BS ISO 5667-6:2005 Guidance on sampling of rivers and streams EH/3/6

AUE/4

BS ISO 6768:1998 BS ISO 1924-3:2005 Constant rate of elongation method (100 mm/min)

BS ISO 4251-2:2005 Tyre load ratings

Ambient air. Determination of mass concentration of nitrogen dioxide. Modified Griess-Saltzman method

PAI/11

AUE/4

EH/2/3

34



BS ISO 6939:1988

BS ISO 10653:1993

BS ISO 12645:1998

Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method

Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities

Graphic technology. Process control. Certified reference material for opaque area calibration of transmission densitometers

TCI/24

PKW/0

PAI/43

BS ISO 7141:2005

BS ISO 10654:1993

Road vehicles. Light alloy wheels. Impact test

Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes

BS ISO 13202:2003

AUE/4

PKW/0

Cranes. Measurement of velocity and time parameters MHE/3/11

BS ISO 7588:— Road vehicles. Electrical/electronic switching devices

BS ISO 13299:2003 BS ISO 10972:— Cranes. Requirements for mechanisms

AW/12

BS ISO 7588-1:1998 Relays and flashers AUE/16

BS ISO 10972-1:1998 General

BS ISO 13302:2003

MHE/3/3

Sensory analysis. Methods for assessing modifications to the flavour of foodstuffs due to packaging

BS ISO 7588-2:1998 Electronic devices

BS ISO 11157:2005

AUE/16

Road vehicles. Brake lining assemblies. Inertia dynamometer test method

BS ISO 7588-3:1998

AUE/11

Tyres and rims (metric series) for agricultural tractors and machines

BS ISO 7867-2:2005 Service description and load ratings

EH/4

BS ISO 11992:—

GME/21/5

Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles

BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons

BS ISO 11992-4:2005 BS ISO/IEC 7942:—

Diagnostics

Information technology. Computer graphics and image processing. Graphical Kernel System (GKS)

AUE/16

Picture part archive

Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light

IST/31

PAI/43

Mopeds. Measurement methods for location of centre of gravity AUE/14

BS ISO 9276:— Representation of results of particle size analysis

SS/6

BS ISO 14368:— BS ISO 12040:1997

BS ISO 8705:2005

BS ISO 13373-2:2005 Processing, analysis and presentation of vibration data

AUE/4

BS ISO/IEC 7942-4:1998

BS ISO 13373:—

BS ISO 11262:2003 Soil quality. Determination of cyanide

BS ISO 7867:—

AW/12

Condition monitoring and diagnostics of machines. Vibration condition monitoring

Microrelays AUE/16

Sensory analysis. Methodology. General guidance for establishing a sensory profile

Mineral and sapphire watch-glasses

BS ISO 14368-3:2003 Qualitative criteria and test methods STI/53

BS ISO 12218:1997 Graphic technology. Process control. Offset platemaking

BS ISO/IEC 14478:—

PAI/43

Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO)

BS ISO 12478:—

BS ISO/IEC 14478-1:1998

Cranes. Maintenance manual

Fundamentals of PREMO IST/31

BS ISO 9276-1:1998 Graphical representation LBI/37

BS ISO 12478-1:1998 General

BS ISO/IEC 14478-2:1998

MHE/3/11

Foundation component IST/31

BS ISO 9276-5:2005 Methods of calculation relating to particle size analyses using logarithmic normal probability distribution

BS ISO 12636:1998 Graphic technology. Blankets for offset printing

BS ISO/IEC 14478-3:1998

PAI/43

Multimedia systems services

LBI/37

IST/31

BS ISO 12641:1997 BS ISO 10231:2003

Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration

BS ISO/IEC 14478-4:1998

Motorcycle tyres. Test methods for verifying tyre capabilities AUE/4

PAI/43

IST/31



Modelling, rendering and interaction component

35

British Standards Under Review continued... BS ISO 14621:—

DD ISO/TS 16649:—

BS ISO 22664:2005

Space systems. Electrical, electronic and electromechanical (EEE) parts

Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of β-glucuronidase positive Escherichia coli

Space data and information systems. TC (telecommand) space data links protocol ACE/68/-/7

BS ISO 14621-2:2003 Control programme requirements

DD ISO/TS 16649-3:2005

ACE/68

Most probable number technique using 5-bromo-4-chloro-3-indoyl-β-D-glucuronide

BS ISO 14686:2003

AW/9

BS ISO 22667:2005 Space data and information transfer systems. Communications operations procedure-1 ACE/68/-/7

Hydrometric determinations. Pumping tests for water wells. Considerations and guidelines for design, performance and use

BS ISO 17554:2005 Reaction to fire tests. Mass loss measurement

PD ISO/IEC TR 9126:—

CPI/113

FSH/21

Software engineering. Product quality

BS ISO 14835:—

BS ISO 17604:2003 Microbiology of food and animal feeding stuffs. Carcass sampling for microbiological analysis

PD ISO/IEC TR 9126-2:2003

Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function

BS ISO 14835-1:2005

BS ISO 17724:2003

PD ISO/IEC TR 9126-3:2003

Graphical symbols. Vocabulary

Internal metrics

PH/8

IST/15

BS ISO 18738:2003

BS Z 10:1998 (ISO 15395:1998)

Measurement and evaluation of finger skin temperature

AW/9

External metrics IST/15

GME/21/6

BS ISO 14835-2:2005 Measurement and evaluation of finger systolic blood pressure

Lifts (elevators). Measurement of lift ride quality MHE/4

Space data and information transfer systems. Standard formatted data units. Control Authority data structures

BS ISO 18770:2005

ACE/68/-/7

GME/21/6

BS ISO 14837:— Mechanical vibration. Ground-borne noise and vibration arising from rail systems

Ships and marine technology. Machinery space flammable oil systems. Prevention of leakage of flammable oil SME/32/3

BS MA 97:1984 (ISO 6812:1983)

General guidance

BS ISO 19005:—

Specification for roll on/roll off ship-to-shore connection: interface between terminals and ships with straight stern/bow ramps

GME/21/3

Document management. Electronic document file format for long-term preservation

SME/32

BS ISO 19005-1:2005

BS AU 50:—

Use of PDF 1.4 (PDF/A-1)

Tyres and wheels

BS ISO 14837-1:2005

BS ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles. Requirements and test methods

IDT/1/2

CH/212

BS ISO 16121:— Road vehicles. Ergonomic requirements for the driver’s workplace in line-service buses

BS ISO 16121-1:2005 General description, basic requirements

BS AU 50-1:— BS ISO 19379:2003

BS AU 50-1.0.1:1999 (ISO 13326:1998)

EPL/80

BS ISO 22641:2005

AUE/12

Space data and information transfer systems. TM (telemetry) synchronization and channel coding

BS ISO 16121-2:2005

ACE/68/-/7

Visibility AUE/12

BS ISO 22642:2005

BS ISO 16121-3:2005

Space data and information transfer systems. TC (telecommand) synchronization and channel coding

Information devices and controls

Tyres

Ships and marine technology. ECS databases. Content, quality, updating and testing

General. Method of test for measuring tyre uniformity AUE/4

BS AU 50-1.5.5:1998 (ISO 10499-2:1998) Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims. Load ratings AUE/4

ACE/68/-/7

AUE/12

BS ISO 16121-4:2005

BS ISO 22645:2005

Cabin environment

Space data and information transfer systems. TM (telemetry) space data link protocol

AUE/12

ACE/68/-/7

BS ISO 16642:2003

BS ISO 22646:2005

Computer applications in terminology. Terminological markup framework

Space data and information transfer systems. Space packet protocol

TS/1

ACE/68/-/7

e-mail your order

36


[email protected]


NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

BS 3621:2007/Amendment 1 Thief resistant lock assembly. Key egress

BS EN 598:2007/Amendment 1

BS EN 1492-4:2004/Amendment 1

Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods

Lifting slings for general service made from natural and man-made fibre ropes MHE/15

PSE/10

BS EN 848:— Safety of woodworking machines. One side moulding machines with rotating tools

BS EN 1493:1999/Amendment 1 Vehicle lifts MHE/12


BS EN 1562 (Revision)

Numerically controlled (NC) boring and routing machines

Founding. Malleable cast irons

MTE/23

ISE/35

will supersede BS EN 1562:1997

B/538/4

BS EN 933:— BS 4607:— Non-metallic conduits and fittings for electrical installations

BS 4607-5:1982/Amendment 3

Tests for geometrical properties of aggregates

BS EN 1677:— Components for slings. Safety

BS EN 933-9 (Revision) Assessment of fines. Methylene blue test


will supersede BS EN 933-9:1999

Forged steel components. Grade 8 MHE/1

Specification for rigid conduits, fittings and components of insulating material

B/502/6

PEL/213

BS EN 1175:—


Safety of industrial trucks. Electrical requirements

Links. Grade 8

BS 4875:—

MHE/1

Strength and stability of furniture

BS EN 1175-1:1998/Amendment 1 BS 4875-5 (Revision) Requirements for strength, durability and stability of tables and trolleys for domestic and contract use

General requirements for battery powered trucks

BS EN 1677-5:2001/Amendment 1 Forged steel lifting hooks with latch. Grade 4 MHE/1

MHE/7

will supersede BS 4875-5:2001



FW/0/2

General requirements of internal combustion engine powered trucks

Links. Grade 4 MHE/1

MHE/7

BS 6700:2006/Amendment 1 Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Specification B/504/2

BS EN 1175-3:1998/Amendment 3 Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

BS EN 1726:— Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N

MHE/7

BS 7376 (Revision) Inclusion of glass in the construction of tables and trolleys. Specification will supersede BS 7376:2004 FW/0/2

BS EN 1457:— Chimneys. Clay/ceramic flue liners

BS EN 1457-1

BS 8621:2007/Amendment 1

Flue liners operating under dry conditions. Requirements and test methods

Thief resistant lock assembly. Keyless egress

B/506/3

BS EN 1457-2 Thief resistant dual mode lock assemblies B/538/4

BS EN 81:— Safety rules for the construction and installation of lifts

BS EN 81-1:1998/Amendment 3 Electric lifts

General requirements MHE/7

BS EN 1751 (Revision) Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves will supersede BS EN 1751:1999

B/538/4

BS 10621:2007/Amendment 1


Flue liners operating under wet conditions. Requirements and test methods B/506/3

RHE/2

BS EN 1870:— Safety of woodworking machines. Circular sawing machines

BS EN 1492:— Textile slings. Safety



Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)

Flat woven webbing slings, made of man-made fibres, for general purpose use

MTE/23

MHE/15

MHE/4

BS EN 1911 BS EN 1492-2:2000/Amendment 1 Hydraulic lifts

Roundslings made of man-made fibres for general purpose use

Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method

MHE/4

MHE/15

EH/2/1




37

New Work Started continued... BS EN 1912:2004/Amendment 3


BS EN 13414:—

Structural timber. Strength classes. Assignment of visual grades and species

Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (type 6 and type PB [6] equipment)

Steel wire rope slings. Safety

B/518

BS EN ISO 2307 (Revision)

PH/3/3

will supersede BS EN ISO 2307:2005

BS EN 13381:—

TCI/77

Test methods for determining the contribution to the fire resistance of structural members


will supersede BS EN ISO 7783-1:2000 and BS EN ISO 7783-2:1999

Slings for general lifting service MHE/2

Fibre ropes. Determination of certain physical and mechanical properties

Paints and varnishes. Determination of watervapour transmission properties. Cup method


BS EN 13381-4 Applied passive protection products to steel members FSH/22

STI/10

BS EN 13414-2:2003/Amendment 2 Specification for information for use and maintenance to be provided by the manufacturer MHE/2

BS EN 13414-3:2003/Amendment 1 Grommets and cable-laid slings MHE/2



Fibre ropes. General specifications

Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen

will supersede BS EN ISO 9554:2005 TCI/77

PTI/13

will supersede BS EN 10169-1:2003, BS EN 101692:2006 and BS EN 10169-3:2003 ISE/10

BS EN 13480-2:2002/Amendment 2 Materials

BS EN 13399 (Revision) Bitumen and bituminous binders. Determination of storage stability of modified bitumen will supersede BS EN 13399:2003

BS EN 12385:—

Metallic industrial piping


BS EN 10169 (Revision) Continuously organic coated (coil coated) steel flat products

BS EN 13480:—

PVE/10

BS EN 13523:— Coil coated metals. Test methods

PTI/13

Steel wire ropes. Safety

BS EN 13523-8 (Revision) Resistance to salt spray (fog)

BS EN 12385-1:2002/Amendment 1 General requirements

BS EN 13411:— Terminations for steel wire ropes. Safety

will supersede BS EN 13523-8:2002 STI/27

MHE/2

BS EN 13411-1:2002/Amendment 1 BS EN 12472:2005/Amendment 1

Thimbles for steel wire rope slings

Method for the simulation of wear and corrosion for the detection of nickel release from coated items

MHE/2

STI/53


BS EN 12566:— Small wastewater treatment systems for up to 50 PT

BS EN 12566-6

Splicing of eyes for wire rope slings


MHE/2

Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method



Ferrules and ferrule-securing

PTI/13

MHE/2

BS EN 13632 (Revision) BS EN 13411-4:2002/Amendment 1 Metal and resin socketing

BS EN ISO 12952:—

Resistance to environmental soiling (dirt-pickup) STI/27

Prefabricated treatment units for septic tank effluent B/505

BS EN 13523-29

MHE/2

Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen will supersede BS EN 13632:2003

Textiles. Burning behaviour of bedding items

PTI/13

BS EN 13411-5:2003/Amendment 1 BS EN ISO 12952-1 (Revision)

U-bolt wire rope grips

General test methods for the ignitability by a smouldering cigarette

MHE/2

BS EN 13693:2004/Amendment 1 Precast concrete products. Special roof elements

will supersede BS EN ISO 12952-1:1999 TCI/66/-/8


B/524

Asymmetric wedge socket MHE/2

BS EN 13702

General test methods for the ignitability by a small open flame


Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Cone and plate method

will supersede BS EN ISO 12952-3:1999

Symmetric wedge socket


TCI/66/-/8

MHE/2

PTI/13

BS EN ISO 12952-3 (Revision)

38




BS EN 15153-2 (Revision)

BS EN 50525-2:—

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification

Warning horns

Cables for general applications

will supersede BS EN 15153-2:2007 RAE/1/-/7

will supersede BS EN 13766:2003 PRI/66

BS EN 15269:—


Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware

Forged steel shackles for general lifting purposes. Dee shackles and bow shackles. Grade 6. Safety MHE/1

B/510/19

will partially supersede BS 6500:2000 GEL/20/17

Extensible leads with thermoplastic PVC insulation GEL/20/17

FSH/24

Bitumen and bituminous binders. Framework specification for polymer modified bitumens will supersede BS EN 14023:2005

Flexible cables with thermoplastic PVC insulation

BS EN 50525-2-12 BS EN 15269-2 Fire resistance of hinged and pivoted steel doorsets


BS EN 50525-2-11

BS EN 50525-2-21 BS EN 15269-3 Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows

Flexible cables with crosslinked elastomeric insulation will partially supersede BS 6500:2000

FSH/24

GEL/20/17

Timber structures. Strength graded structural timber with rectangular cross section

DD CEN/TS 15873

BS EN 50525-2-22 High flexibility braided cables with crosslinked elastomeric insulation


Postal Services. Open Standard Interface. Address Data File Format for OCR/VCS Dictionary Generation SVS/4

GEL/20/17

BS EN 14081:—

Machine grading. Grading machine settings for machine controlled systems will supersede BS EN 14081-4:2005 B/518

BS EN 14132 (Revision) Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up will supersede BS EN 14132:2003 AW/-/3

BS EN 15876:— Electronic fee collection. Conformity evaluation of on board unit and roadside equipment to EN 15509

Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with clean-up on a immunoaffinity column clean-up will supersede BS EN 14133:2003

Petroleum and natural gas industries. Pipeline transportation systems

GEL/20/17

Test suite structure and test purposes EPL/278

Road transport and traffic telematics. Electronic fee collection (EFC). Guidelines for EFC security protection profiles will supersede DD CEN ISO/TS 17574:2004 EPL/278

BS EN 50126:— Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS)

will partially supersede BS 6007:2006 GEL/20/17

BS EN 50525-2-42 Single core non-sheathed cables with crosslinked EVA insulation will partially supersede BS 6007:2006 GEL/20/17

Oil resistant control cables with thermoplastic PVC insulation

Basic requirements and generic process

will partially supersede BS 7919:2001


Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (type 3) or spray-tight (type 4) connections, including items providing protection to parts of the body only (types PB [3] and PB [4])

GEL/9

GEL/20/17

BS EN 50525-2-71 BS EN 50346:2002+A1:2007/ Amendment 2

Flat tinsel cables (cords) with thermoplastic PVC insulation

Information technology. Cabling installation. Testing of installed cabling

GEL/20/17

TCT/7

BS EN 50525-2-72

BS EN 15153:— Railway applications. External visible and audible warning devices for high speed trains

Single core cables with crosslinked silicone rubber insulation



PH/3/3

BS EN 50525-2-41

BS EN 50525-2-51

will supersede BS EN 14161:2003 PSE/17/2

Single core non-sheathed cables with thermoplastic PVC insulation

BS EN 15876-1

AW/-/3


BS EN 50525-2-31


DD CEN ISO/TS 17574 (Revision) BS EN 14133 (Revision)


BS EN 50525:— Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V


Flat divisible cables (cords) with thermoplastic PVC insulation GEL/20/17

BS EN 50525-2-81

Head, marker and tail lamps

BS EN 50525-1



Cables with crosslinked elastomeric covering for arc welding

RAE/1/-/7

GEL/20/17

GEL/20/17



39

New Work Started continued... BS EN 50525-2-82

BS EN 60917:—

PD ISO/TR 12490

Cables with crosslinked elastomeric insulation for decorative chains

Modular order for the development of mechanical structures for electronic equipment practices

Petroleum and natural gas industries. Pipeline transportation systems. Actuation, mechanical integrity and sizing for pipeline valves

GEL/20/17

PSE/17/2

BS EN 50525-2-83 Multicore cables with crosslinked silicone rubber insulation will partially supersede BS 7919:2001 GEL/20/17

BS EN 60917-2-4 Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Adaptation dimensions for subracks applicable in cabinets in accordance with IEC 60297-3-100 (19 in)

BS ISO 12751 Tourist information and reception services at tourist information offices SVS/2/8

EPL/48

BS EN 50525-3:— Cables with special fire performance

BS ISO 12768 BS EN 61788:—

Thalassotherapy services

Superconductivity

SVS/2/2

BS EN 50525-3-11 Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke GEL/20/17

BS EN 50525-3-21 Flexible cables with halogen-free crosslinked insulation, and low emission of smoke

BS EN 61788-8 (Revision) AC loss measurements. Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method

Guidance on standards for unshaped refractory products RPI/1


BS ISO 13009

L/-/90

GEL/20/17

BS EN 50525-3-31

BS ISO 12828

Beaches

BS EN 61788-14

SVS/2

Single core non-sheathed cables with halogenfree thermoplastic insulation, and low emission of smoke

Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices

BS ISO 13010

GEL/20/17

L/-/90

SVS/2

BS EN 50525-3-41

BS EN 61788-15

Single core non-sheathed cables with halogenfree crosslinked insulation, and low emission of smoke

BS ISO 15031:—

Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies

Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics

GEL/20/17

L/-/90

BS EN 60297:—

BS ISO 6312

Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482, 6 mm (19 in) series

Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies

Natural protected areas

BS ISO 15031-5 (Revision) Emissions-related diagnostic services will supersede BS ISO 15031-5:2006 AUE/16

AUE/11

BS EN 60297-3-106 Adaptation dimensions for subracks applicable in metric cabinets in accordance with IEC 609172-1 EPL/48

BS EN 60317:— Specifications for particular types of winding wires

BS EN 60317-57 Polyamide-imide enameled round copper wire, class 220 GEL/55

BS ISO 10667 Procedures and methods to assess people in work and organizational settings

PD ISO/IEC TR 15504:— Information technology. Software process assessment

SVS/9/1

PD ISO/IEC TR 15504-6 BS ISO 10668

Guide to competency of assessors

Monetary brand valuation

will supersede BS ISO/IEC TR 15504-6:1998

SVS/12/1

IST/15

BS ISO 10935 Microscopes. Interfacing connection type C will supersede BS 7012-9:1997 CPW/172/5

BS EN 60317-58 Polyamide-imide enameled rectangular copper wire, class 220

BS ISO XXXXX

GEL/55

SVS/2/7

BS ISO 19892 Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for the resistance of joints to pressure cycling PRI/88/4

Golf course services

BS ISO 19893 BS EN 60810:2003/Amendment 1

BS ISO 12251

Lamps for road vehicles. Performance requirements

Diesel engines. Clamp mounted common rail fuel injectors. Mounting dimensions

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling

CPL/34/1

MCE/22

PRI/88/4

40



BS ISO 22762:—

DD IEC/TS 61000:—

Elastomeric seismic-protection isolators. Applications for buildings

Electromagnetic compatibility (EMC)

DD IEC/TS 61000-3-5 BS ISO 22762-3 (Revision) Specifications will supersede BS ISO 22762-3:2005 PRI/73

Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75A GEL/210/12

BS IEC 61207:— BS ISO 24343:—

Expression of performance of gas analyzers

Resilient and laminate floor coverings. Determination of indentation and residual indentation

BS IEC 61207-7 Tunable laser gas analyzers GEL/65/2

BS ISO 24343-2 Short-term residual indentation PRI/3/60

BS IEC 61588 (Revision) Precision clock synchronization protocol for networked measurement and control systems

BS ISO 24343-3

will supersede BS IEC 61588:2004

Semi-flexible/vinyl composition tiles. Indentation

AMT/7

PRI/3/60

BS ISO/TR 26762 Natural gas. Upstream area. Allocation of gas and condensate PTI/15

PD IEC/TR 62443:— Industrial communication networks. Network and system security

PD IEC/TR 62443-5 Security technologies for industrial automation and control systems GEL/65

PD ISO/TR 26873 Plastics pipes and fittings. Definition and construction procedures for reference lines

PD CEN/TR WI 00156138

PRI/88/4

Ventilation for buildings. Chilled ceilings. Testing and rating

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting http://www.bsigroup.com/drafts. All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at http://www.bsigroup.com/drafts. The deadline for the following drafts is 30 November, 2008 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see ’How to order’ on page 2).

RHE/2

BS ISO 27508 Electric resistance welding. Method for the assessment of coated and uncoated weld bonded sheet materials WEE/29

PD CEN/TR WI 00156139

08/30133813 DC

Air flow measurements in ventilation systems

BS 7371-1 Coatings on metal fasteners. Part 1. Specification for general requirements and selection guidelines

RHE/2

FME/9/1

BS ISO 28621

PD ISO/IEC TR 29127

Medical spas

Intelligent system process for multilingual semantic reverse query expansion

SVS/2/2

IST/43

PD ISO/TR 28642 Dentistry. Dental shade conformity and interconvertibility CH/106/2

08/30133820 DC BS 7371-3 Coatings on metal fasteners. Part 3. Specifications for electroplated zinc coatings

PAS 24:2007/Amendment 1

FME/9/1

Enhanced security performance requirements for door assemblies B/538/4

08/30166965 DC BS 25777 Code of practice for information and communications technology continuity

BS ISO 29283

BCM/1

Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.20

Comments for the above document are required by 17 October, 2008

EPL/278

Please do not send confirmation

PD CLC/TR 50484 Recommendations for shielded enclosures GEL/210/12

of

Electromagnetic compatibility. Emission measurements in fully anechoic chambers

as it can lead to duplication

will supersede PD CR R210-010:2002

SW/136/-/7

08/30179078 DC BS 2742 Use of the Ringelmann and miniature smoke charts EH/2/1


GEL/210/12


BS 7875 Synthetic saddle trees. Specification

orders placed by telephone

PD CLC/TR 50485

08/30167722 DC


41

Draft British Standards for Public Comment continued... 08/30184135 DC

08/30110642 DC

08/30165993 DC

BS 7863 Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers

BS EN 1071-12 Advanced technical ceramics. Methods of test for ceramic coatings. Part 12. Reciprocating wear test

BS ISO 6708 Pipework components. Definition and selection of DN, NPS and A

FSH/2

RPI/13

Comments for the above document are required by 31 December, 2008

08/30188981 DC BS 3621 AMD1 Thief resistant lock assembly. Key egress B/538

08/30189024 DC BS 8621 AMD1 Thief resistant lock assembly. Keyless egress B/538

08/30189026 DC BS 10621 AMD1 Thief resistant dual-mode lock assembly

08/30111284 DC BS IEC 62376 Maritime navigation and radiocommunication equipment and systems. Electronic chart system (ECS). Operational and performance requirements, methods of testing and required test results EPL/80


BS ISO 14155 Clinical investigation of medical devices for human subjects. Good clinical practice

B/538

08/30189211 DC PD 6694-1 Recommendations for the design of structures subject to traffic loading to BS EN 1997-1

BS EN 15857 Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria WEE/46

BS ISO 15769 Hydrometry. Guidelines for the application of acoustic velocity meters using the doppler and echo correlation methods CPI/113/1

CH/194

08/30135847 DC PAS 24 AMD1 Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings

08/30168672 DC

08/30169016 DC 08/30116059 DC

B/538

08/30189028 DC

PSE/15/2

BS ISO 9004 Managing for the sustained success of an organization. A quality management approach

08/30170025 DC BS ISO 28620 Medical devices. Non-electrically driven portable infusion devices CH/212

QS/1

08/30170164 DC 08/30139026 DC BS ISO 26062 Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry NCE/9

BS EN ISO 10993-10 Biological evaluation of medical devices. Part 10. Tests for irritation and skin sensitization CH/194

Comments for the above document are required by 24 November, 2008

B/526

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below.

08/30146611 DC

08/30170504 DC

BS EN 61935-2 Specification for the testing of balanced and coaxial information technology cabling. Part 2. Patch cords and work area cords as specified in ISO/IEC 11801 and related standards

BS EN 1071-13 Advanced technical ceramics. Methods of test for ceramic coatings. Part 13. Determination of wear rate by the pin-on-disk method

08/30154286 DC BS ISO 8026 Agricultural irrigation equipment. Sprayers. General requirements and test methods AGE/30


08/30156451 DC

Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 November, 2008 unless otherwise stated, to be considered by the relevant BSI committee.

BS EN ISO 10993-13 Biological evaluation of medical devices. Part 13. Identification and quantification of degradation products from polymeric medical devices

Draft standards may be modified before adoption and issue as British Standards.

08/30162845 DC

CH/194


BS ISO 3780 Road vehicles. World manufacturer identifier (WMI) code AUE/15

IDT/2/7


42

08/30171660 DC BS ISO 19713-2 Inlet air cleaning equipment for internal combustion engines and compressors. Part 2. Fractional efficiency testing with coarse particles (5 µ m to 40 µ m optical diameter) MCE/21/2

08/30172854 DC BS ISO 21438-2 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Part 2. Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) EH/2/2


08/30173112 DC BS EN ISO 8612 Ophthalmic instruments. Tonometers CH/172/6

08/30103869 DC BS ISO 2146 Information and documentation. Registry services for libraries and related organizations

RPI/13

EPL/46

08/30165680 DC BS EN 15856 Non-destructive testing. Acoustic emission. General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

08/30173378 DC

WEE/46

AUE/16


BS ISO 16750-2 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 2. Electrical loads


08/30173382 DC

08/30174737 DC

08/30178723 DC

BS ISO 16750-4 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 4. Climatic loads

BS EN 13985 AMD1 Machine tools. Safety. Guillotine shears

BS ISO 15798 Ophthalmic implants. Ophthalmic viscosurgical devices

MTE/1

CH/172/7

AUE/16


08/30181655 DC 08/30173986 DC BS EN 61167 Metal halide lamps CPL/34/1

08/30175518 DC BS EN 13141-2 Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 2. Exhaust and supply air terminal devices

08/30174113 DC

RHE/2

BS EN 1915-4 AMD1 Aircraft ground support equipment. General requirements. Part 4. Noise measurement methods and reduction


ACE/57

08/30175672 DC 08/30174116 DC BS EN 1915-1 AMD1 Aircraft ground support equipment. General requirements. Part 1. Basic safety requirements ACE/57

08/30174119 DC BS EN 1915-2 AMD1 Aircraft ground support equipment. General requirements. Part 2. Stability and strength requirements, calculations and test methods

BS EN 15852 Ambient air quality. Standard method for the determination of total gaseous mercury EH/2/3


08/30175675 DC BS EN 15853 Ambient air quality. Standard method for the determination of mercury deposition EH/2/3

ACE/57


08/30174122 DC

08/30176810 DC

BS EN 1915-3 AMD1 Aircraft ground support equipment. General requirements. Part 3. Vibration measurement methods and reduction

BS EN 15027 AMD1 Transportable wall saw and wire saw equipment for job site. Safety

ACE/57


08/30174605 DC BS ISO 5597 Hydraulic fluid power. Cylinders. Housings for single-acting piston and rod seals in reciprocating applications. Dimensions and tolerances MCE/11


B/513/-/6

08/30176919 DC BS EN 1366-1 Fire resistance tests for service installations. Part 1. Ducts FSH/22


08/30177095 DC BS EN 692 AMD1 Machine tools. Mechanical presses. Safety

BS ISO 30003 Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management

MTE/1

SME/32

08/30174728 DC


PH/3/1

BS EN 693 AMD1 Machine tools. Safety. Hydraulic presses MTE/1


08/30174734 DC BS EN 13736 AMD1 Safety of machine tools. Pneumatic presses MTE/1



MHE/3/1

08/30182181 DC BS EN 13263-1 AMD1 Silica fume for concrete. Part 1. Definitions, requirements and conformity criteria B/517/4

08/30182184 DC BS EN 13263-2 AMD1 Silica fume for concrete. Part 2. Conformity evaluation B/517/8

08/30182203 DC BS EN 500-4 AMD2 Mobile road construction machinery. Safety. Part 4. Specific requirements for compaction machines B/513/1


08/30182206 DC BS EN 12348 AMD1 Core drilling machines on stand. Safety B/513/-/6


08/30182209 DC BS EN 12418 AMD1 Masonry and stone cutting-off machines for job site. Safety B/513/-/6


08/30182212 DC BS EN 13862 AMD1 Floor cutting-off machines. Safety B/513/-/6


08/30177216 DC BS EN 530 Abrasion resistance of protective clothing material. Test methods

08/30174731 DC

BS EN 13001-3-1 Cranes. General design. Part 3-1. Limit states and proof of competence of steel structures £18.00 members, £36.00 non-members

08/30177421 DC BS ISO 10302-2 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air moving devices. Part 2. Structure-borne vibration measurements

08/30182359 DC BS EN 12981 AMD1 Coating plants. Spray booths for application of organic powder coating material. Safety requirements MCE/3/8

08/30182362 DC BS EN 13355 AMD1 Coating plants. Combined booths. Safety requirements

EH/1/4

MCE/3/8

08/30177914 DC

08/30183116 DC

BS EN 12547 AMD1 Centrifuges. Common safety requirements MCE/19


BS EN 459-1 Building lime. Part 1. Definitions, specifications and conformity criteria B/516/11

43

Draft British Standards for Public Comment continued... 08/30183119 DC

08/30183867 DC

08/30187614 DC

BS EN 459-2 Building lime. Part 2. Test methods

BS EN 13141-7 Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 7. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings

BS ISO/IEC 18000-7 Information technology AIDC techniques. Radio frequency identification for item management. Air interface. Part 7. Parameters for active air interface communications at 433 MHz

B/516/11

08/30183128 DC BS EN 15845 Paper and board. Determination of the cytotoxicity of aqueous extracts

RHE/2

PAI/11

08/30183131 DC

08/30183870 DC

BS EN 1313-1 Round and sawn timber. Permitted deviations and preferred sizes. Part 1. Softwood sawn timber

BS EN 15304 Determination of the freeze-thaw resistance of autoclaved aerated concrete B/523

B/543

IST/34


08/30187623 DC BS EN 60335-2-25 Household and similar electrical appliances. Safety. Part 2-25. Particular requirements for microwave ovens, including combination microwave ovens CPL/61/07

08/30183343 DC BS EN 257 Mechanical thermostats for gasburning appliances GSE/22

08/30183873 DC BS EN 1007-5 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 5. Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

08/30187630 DC BS EN 60335-2-90 AMD1 Household and similar electrical appliances. Safety. Part 2-90. Particular requirements for commercial microwave ovens

08/30183463 DC

RPI/13

CPL/61/07

BS EN 15848 Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing

08/30183878 DC

08/30187682 DC

B/504/13

BS EN 13507 Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying

08/30183661 DC

STI/40

BS ISO/IEC 26925 Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW HS format. Capacity. 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8x) £18.00 members, £36.00 non-members

BS ISO 29473 Fire tests. Uncertainty of measurements in fire tests FSH/21


08/30184602 DC BS EN 1639 Dentistry. Medical devices for dentistry. Instruments CH/106

08/30183804 DC BS EN 50206-2 Railway applications. Rolling stock. Pantographs. Characteristics and tests. Part 2. Pantographs for metros and light rail vehicles GEL/9/2

08/30183807 DC BS EN 50206-1 Railway applications. Rolling stock. Pantographs. Characteristics and tests. Part 1. Pantographs for main line vehicles GEL/9/2

08/30183846 DC BS EN 14078 Liquid petroleum products. Determination of fatty methyl ester (FAME) content in middle distillates. Infrared spectrometry method


08/30184608 DC

CH/106


08/30184612 DC BS EN 1641 Dentistry. Medical devices for dentistry. Materials

GSE/22


PRI/88/2

44

ICT/-/1

08/30187686 DC BS ISO/IEC 17344 Information technology. Data interchange on 120 mm and 80 mm optical disk using +R format. Capacity. 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16x) £18.00 members, £36.00 non-members ICT/-/1

08/30187688 DC

BS EN 1642 Dentistry. Medical devices for dentistry. Dental implants

BS ISO/IEC 17341 Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW format. Capacity. 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4x) £18.00 members, £36.00 non-members

CH/106

ICT/-/1


08/30187690 DC

08/30183864 DC BS EN 1119 Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of nonthrust resistant flexible joints with elastomeric sealing elements

BS ISO/IEC 12862 Information technology. 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL) £18.00 members, £36.00 non-members

CH/106

08/30184615 DC BS EN 1106 Manually operated taps for gas burning appliances

08/30187684 DC

BS EN 1640 Dentistry. Medical devices for dentistry. Equipment

PTI/13

08/30183852 DC

ICT/-/1

BS ISO/IEC 22535 Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Tunnelling of QSIG over SIP

BS ISO/IEC 29642 Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW DL format. Capacity. 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4x) £18.00 members, £36.00 non-members

IST/6

ICT/-/1

08/30185288 DC



08/30187781 DC

08/30188248 DC

08/30188855 DC

BS EN ISO 10993-16 Biological evaluation of medical devices. Part 16. Toxicokinetic study design for degradation products and leachables

BS EN 60512-9-3 Connectors for electronic equipment. Tests and measurements. Part 9-3. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load

BS EN ISO 10156 Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets

EPL/48


CH/194



PVE/3/1

08/30187804 DC BS EN ISO 2867 Earth-moving machinery. Access systems B/513/1

08/30188330 DC BS EN ISO 178 Plastics. Determination of flexural properties PRI/21

08/30187815 DC BS ISO 19713-1 Road vehicles. Inlet air cleaning equipment for internal combustion engines and compressors. Part 1. Fractional efficiency testing with fine particles (0,3 µ m to 5 µ m optical diameter) MCE/21/2

08/30187838 DC BS ISO/IEC 14496-5 AMD22 Information technology. Coding of audio-visual objects. Part 5. Reference software for 3D Graphics Compression Model (3DGCM) IST/37

08/30187839 DC BS ISO 3779 Road vehicles. Vehicle identification number (VIN). Content and structure AUE/15

08/30188055 DC

08/30188464 DC

EPL/51

08/30188941 DC


BS ISO 8301 AMD1 Thermal insulation. Determination of steady-state thermal resistance and related properties. Heat flow meter apparatus

08/30188476 DC BS ISO 13584-32 Industrial automation systems and integration. Parts library. Part 32. Implementation resources. OntoML. Ontology markup language £18.00 members, £36.00 non-members AMT/4

08/30188489 DC BS EN 54-27 Fire detection and fire alarm systems. Part 27. Duct smoke detectors

GEL/82

08/30188496 DC BS EN 61000-4-15 Electromagnetic compatibility (EMC). Part 4-15. Testing and measurement techniques. Flickermeter. Functional and design specifications GEL/210/12

TCI/81

08/30188504 DC 08/30188237 DC BS EN 60335-2-5 AMD Household and similar electrical appliances. Safety. Part 2-5. Particular requirements for dishwashers CPL/61/14


BS EN 62317-2 Ferrite cores. Dimensions. Part 2. Pot-cores for use in telecommunications, power supply, and filter applications

BS EN 60904-4 Photovoltaic devices. Part 4. Procedure for establishing the traceability of the calibration of reference solar devices

BS EN ISO 105-J03 Textiles. Tests for colour fastness. Part J03. Calculation of colour differences

BS EN 15854 Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixing flow application. Non-isothermal procedure for a cold jet RHE/2

FSH/12/2

08/30188165 DC

08/30188933 DC

BS ISO 3500 AMD1 Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships

B/540


08/30189097 DC BS ISO 12968 Thermal insulation products for building applications. Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) B/540


DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

PVE/3/3


BS EN 60601:— Medical electrical equipment

08/30188242 DC BS EN 15850 Foodstuffs. Determination of zearalenone in barley, maize and wheat flour, polenta and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection AW/-/3

08/30188245 DC BS EN 15851 Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection AW/-/3


08/30188684 DC BS ISO 7268 Pipe components. Definition and selection of PN, Class and K PSE/15


08/30188848 DC BS EN 60904-10 Photovoltaic devices. Part 10. Methods of linearity measurement GEL/82



BS EN 60601-2-41 Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis This standard has been circulated to CENELEC members as a draft for enquiry by CENELEC/TC 62. This has not been circulated as a Draft for Public Comment, but copies of the text are available from the Programme Manager (below). Contact: Philippa Younas Email: [email protected] CH/62/4

45

Documents Not Issued as DPCs continued... EN 13834:2007/Amendment 1

EN ISO 10304:—

prEN 1594

Cookware. Ovenware for use in traditional domestic ovens

Water quality. Determination of dissolved anions by liquid chromatography of ions

Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements

This European Standard has not been issued as a Draft for Public Comment. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected]

EN ISO 10304-1 (ISO 10304-1:2007) Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate

Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] GSE/33

CW/9

IEC 61788:— Superconductivity

IEC 61788-8 AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

IEC 61788-14 Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices

IEC 61788-15 Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies Copies of the above documents are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected]

The UK approved of this reference ISO document at draft stage and is proposing to support adoption as a European standard. Contact: Roger Wellings Email: [email protected]

CEN EUROPEAN STANDARDS

EH/3/2

EUROPEAN RATIFIED TEXTS

EN ISO 21427:— Water quality. Evaluation of genotoxicity by measurement of the induction of micronuclei

EN ISO 21427-2 (ISO 21427-2:2006) Mixed population method using the cell line V79 The UK approved of this reference ISO document at draft stage and is proposing to support adoption as a European standard. Contact: Roger Wellings Email: [email protected] EH/3/5

The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

EN 30:— Domestic cooking appliances burning gas

EN 30-1-1:2008

L/-/90

Safety. General GSE/35

ISO 11218 Aerospace. Cleanliness classification for hydraulic fluids The above draft has been circulated for ISO/DIS. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] ACE/69

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

prEN 953:1997/Amendment 1 Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards

PTI/15

MCE/3

Rubber and plastics machines. Extruders and extrusion lines

prEN ISO 19136 (ISO 19136:2007)

EN 1114-2:1998+A1:2008

Geographic information. Geography Markup Language (GML)

MCE/3/2

Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] GSE/32

IST/36

Gas pressure regulators for inlet pressures up to 100 bar

46

Automotive fuels. LPG. Requirements and test methods

This standard has been revised to take account of Annex ZA and ZB as a result of the new Safety of Machinery Directive. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 12 December, 2008. A copy of the draft is available on request under document reference MCE/3: 08_0188 Contact: Anita Attra Email: [email protected]

This standard has been circulated to CEN members for UAP ballot. If approved it will be implemented as BS EN ISO 19136. The UK national committee voted for approval of ISO/DIS 19136 (circulated as BSI Draft for Public Comment 05/30141887 DC) and supports its adoption as a European standard. Contact: Vanessa Tatler Email: [email protected]

EN 334:2005/Amendment 1

EN 589:2008

EN 813:2008 Personal fall protection equipment. Sit harnesses PH/5

EN 1114:—

Safety requirements for die face pelletisers

EN 1612:— Plastics and rubber machines. Reaction moulding machines

EN 1612-2:2000+A1:2008 Safety requirements for reaction moulding plant MCE/3/2



EN 2950:2008

EN 12198:—

EN 15288:—

Aerospace series. Test method. Wrought heat resisting alloys Semi-finished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects

Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery

Swimming pools

Safety requirements for design

ACE/61/-/5

EN 12198-3:2002+A1:2008

EN 4626:—

MCE/3

Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures. 65°C to 125°C (cable dependent). Flush contacts

EN 12301:2000+A1:2008

Reduction of radiation by attenuation or screening

Technical specification ACE/6

SW/136

EN 15288-2:2008 Safety requirements for operation

Rubber and plastic machines. Calenders. Safety requirements MCE/3/2

EN 4626-001:2008

EN 15288-1:2008

SW/136

EN 15305:2008 Non-destructive testing. Test method for residual stress analysis by X-ray diffraction WEE/46

EN 13279:— Gypsum binders and gypsum plasters

EN 15381:2008

EN 9104:—

Definitions and requirements

Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays

Aerospace series. Quality management systems

B/544/1

B/553

EN 9104-002:2008

EN 13348:2008

Requirements for Oversight of Aerospace Quality Management System Certification/Registrations Programs

Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum

Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method

NFE/34/1

PTI/13

EN 13718:—

EN 15598:2008

Medical vehicles and their equipment. Air ambulances

Textiles. Terry fabrics. Test method for the determination of the resistance to pile loop extraction

EN 13279-1:2008

EN 15492:2008

ACE/1

EN 10120:2008 Steel sheet and strip for welded gas cylinders ISE/73/2

EN 10293:— Steel castings for general engineering uses

EN 13718-1:2008 Requirements for medical devices used in air ambulances CH/239

CORRIGENDUM 1:June 2008

to EN 10293:2005

EN 13718-2:2008

ISE/6

Operational and technical requirements of air ambulances CH/239

EN 12012:— Plastics and rubber machines. Size reduction machines

EN 12012-1:2007+A1:2008 Safety requirements for blade granulators

TCI/66/1

EN 14286:2008

CEN TECHNICAL SPECIFICATIONS CEN/TS 15731:2008 Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at adapted hydration from commercial or test flours and test milling methodology

Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods

AW/4

NFE/35/5

Fertilizers. Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods

MCE/3/2

EN 14388:— EN 12012-2:2001+A2:2008

Road traffic noise reducing devices. Specifications

Safety requirements for strand pelletisers


MCE/3/2

to EN 14388:2005

CEN/TS 15750:2008

CII/37

B/509/6

Please

EN 12012-3:2001+A1:2008 Safety requirements for shredders

EN 14846:2008

MCE/3/2

Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods

EN 12012-4:2006+A1:2008

B/538/4

Safety requirements for agglomerators

confirmation of orders placed by

MCE/3/2

EN 15000:2008

EN 12110:2002+A1:2008 Tunnelling machines. Air locks. Safety requirements

Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

B/513

MHE/7


do not send



47

CENELEC Publications

CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

EN 50117:— Coaxial cables

EN 50490:2008

EN 60730:—

Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps

Automatic electrical controls for household and similar use

EPL/97

Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

EN 55025:2008 (IEC CISPR 25:2008) Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers

EN 60730-2-6:2008 (IEC 60730-2-6:2007)

CPL/72

EN 60793:— Optical fibres

GEL/210/11

EN 60793-1-1:2008 (IEC 60793-1-1:2008)

EN 60204:—

Measurement methods and test procedures. General and guidance

Safety of machinery. Electrical equipment of machines

GEL/86/1

EN 60204-32:2008 (IEC 60204-32:2008)

Sectional specification for cables for BCT cabling in accordance with EN 50173. Indoor drop cables for systems operating at 5 MHz – 3000 MHz

EN 60927:— (IEC 60927:2007)

Requirements for hoisting machines

Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements

EPL/46

EN 60317:—

EN 50117-4-1:2008

MCE/3

CORRIGENDUM 1:August 2008

Specifications for particular types of winding wires

EN 50164-1:2008 Requirements for connection components GEL/81

EN 60317-0-3:2008 (IEC 60317-0-3:2008) General requirements. Enamelled round aluminium wire

Requirements for conductors and earth electrodes GEL/81

EN 50164-4:2008 Requirements for conductor fasteners

Combined flexible materials for electrical insulation

EN 61076-2:— Circular connectors

EN 61076-2-101:2008 (IEC 61076-2-101:2008) Detail specification for M12 connectors with screw-locking EPL/48

EN 60626-3:2008 (IEC 60626-3:2008)

EN 61076-2-104:2008 (IEC 61076-2-104:2008)

Specifications for individual materials

Detail specification for circular connectors with M8 screw-locking or snap-locking

GEL/15/10

EPL/48

GEL/81

EN 60641:— EN 50164-7:2008

Connectors for electronic equipment. Product requirements

GEL/55

EN 60626:— EN 50164-2:2008

CPL/34/3

EN 61076:—

EN 50164:— Lightning Protection Components (LPC)

to EN 60927:2007

Pressboard and presspaper for electrical purposes

Requirements for earthing enhancing compounds

EN 61076-2-105:2008 (IEC 61076-2-105:2008) Detail specification for M5 connectors with screw-locking

GEL/81

EN 60641-3-1:2008 (IEC 60641-3-1:2008) Specifications for individual materials. Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

EN 61162:—

EN 50408:2008

GEL/15/3

EN 61162-3:2008 (IEC 61162-3:2008)

Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles CPL/61/07

EN 60704:— EN 50411:— Fibre organisers and closures to be used in optical fibre communication systems. Product specifications

EN 50411-2:2008 General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors GEL/86/2

48

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise

EPL/48

Maritime navigation and radiocommunication equipment and systems. Digital interfaces

Serial data instrument network EPL/80

EN 61280:— Fibre optic communication subsystem test procedures

EN 60704-2-13:— (IEC 60704-2-13:2000/A2:2008) Particular requirements for range hoods AMENDMENT 2:September 2008

to EN 60704-2-13:2000

EN 61280-2-2:2008 (IEC 61280-2-2:2008) Digital systems. Optical eye pattern, waveform and extinction ratio measurement GEL/86/3

CPL/59



CENELEC Publications continued... EN 61290:—

EN 62002:—

Optical amplifiers. Test methods

Mobile and portable DVB-T/H radio access

EN 61290-11-1:2008 (IEC 61290-11-1:2008)

EN 62002-1:2008 (IEC 62002-1:2008)

Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME)

Interface specification EPL/100

GEL/86/3

EN 61386:— Conduit systems for cable management

EN 61386-1:2008 (IEC 61386-1:2008) General requirements PEL/213

EN 61496:— Safety of machinery. Electro-sensitive protective equipment

EN 61496-1:2008 (IEC 61496-1:2004)

EN 61646:2008 (IEC 61646:2008) Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval

EPL/100

EN 62220:—

GEL/20/16

Determination of the detective quantum efficiency. Detectors used in dynamic imaging CH/62/2

General and guidance GEL/86/2

EN 61970:— Energy management system application program interface (EMS-API)

EN 61970-402:2008 (IEC 61970-402:2008) Common services PEL/57

EN 61970-403:2008 (IEC 61970-403:2008) Generic data access PEL/57

CENELEC HD 631:— Electric cables. Accessories. Material characterisation

Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure

Fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV £60.80 members, £64.00 non-members


GEL/20/11

to EN 62233:2008

High-voltage switchgear and controlgear

CENELEC HD 631.4 S1:2008 Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV £60.80 members, £64.00 non-members GEL/20/11

EN 62271-205:— (IEC 62271-205:2008) Compact switchgear assemblies for rated voltages above 52 kV

CENELEC HD 60364:— (IEC 60364-4-41:2005) Electrical installations of buildings


to EN 62271-205:2008

EN 61758:—

EN 61758-1:2008 (IEC 61758-1:2008)

Electric cables. Additional test methods £205.20 members, £216.00 non-members

CENELEC HD 631.3 S1:2008 EN 62233:—

PEL/17/1

Fibre optic interconnecting devices and passive components. Interface standard for closures

HARMONIZATION DOCUMENTS

EN 62220-1-3:2008 (IEC 62220-1-3:2008)

EN 62271:—

GEL/86/2

EPL/47

CENELEC HD 605 S2:2008

EN 61753:—

Fibre management systems for Category U. Uncontrolled environment

CLC/TR 62258-8:2008 (IEC/TR 62258-8:2008)

Medical electrical equipment. Characteristics of digital X-ray imaging devices

CPL/61

EN 61753-101-3:2008 (IEC 61753-101-3:2006)

Semiconductor die products

Interface conformance testing

GEL/82

Fibre optic interconnecting devices and passive components performance standard

CLC/TR 62258:—

EXPRESS model schema for data exchange

EN 62002-2:2008 (IEC 62002-2:2008)

General requirements and tests MCE/3

CENELEC REPORTS

EN 62310:— Static Transfer Systems (STS)

EN 62310-3:2008 (IEC 62310-3:2008)

CENELEC HD 60364-4-41:— (IEC 60364-4-41:2005) Protection for safety. Protection against electric shock CORRIGENDUM 1:July 2007

to CENELEC HD 60364-4-41:2005 £123.50 members, £130.00 non-members JPEL/64

Method for specifying performance and test requirements

IEC PUBLICATIONS

PEL/22

EN 62420:2008 (IEC 62420:2008) Concentric lay stranded overhead electrical conductors containing one or more gap(s) GEL/7

EN 62439:2008 (IEC 62439:2008) High availability automation networks

It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2) IEC/TS 60034:— Rotating electrical machines

AMT/7

EN 62491:2008 (IEC 62491:2008)

IEC/TS 60034-18-42:2008

CIM based graphics exchange

Industrial systems, installations and equipment and industrial products. Labelling of cables and cores

Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters £96.00 members, £100.00 non-members

PEL/57

GEL/3

PEL/2

EN 61970-453:2008 (IEC 61970-453:2008)

50



IEC 60050:—

IEC 60947:—

IEC 61467:2008

International Electrotechnical Vocabulary

Low-voltage switchgear and controlgear

Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1 000 V. A.C. power arc tests £120.00 members, £125.00 non-members

IEC 60947-3:2008 IEC 60050-121:— Electromagnetism

(Edition 3)

PEL/36

to IEC 60050-121:1998

Switches, disconnectors, switch-disconnectors and fuse-combination units £137.28 members, £143.00 non-members

£31.68 members, £33.00 non-members

PEL/17/2

(Edition 2)

IEC 61000:—

Weibull analysis £156.48 members, £163.00 non-members

AMENDMENT 2:August 2008

GEL/1

IEC 60364:— Low-voltage electrical installations

Electromagnetic compatibility (EMC)

IEC 61649:2008

DS/1

IEC 61000-4-3:—

IEC 60364-4-43:2008

Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

(Edition 3)

INTERPRETATION SHEET 1:August 2008

Protection for safety. Protection against overcurrent £96.00 members, £100.00 non-members

to IEC 61000-4-3:2006

IEC 62002-1:—

GEL/210/12

Interface specification

JPEL/64

IEC 60364-5-55:— Selection and erection of electrical equipment. Other equipment

IEC 62002:— Mobile and portable DVB-T/H radio access

CORRIGENDUM 1:July 2008

IEC 61157:—

to IEC 62002-1:2008

Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment

EPL/100



to IEC 61157:2007

to IEC 60364-5-55:2001

EPL/87

IEC 62047:— Semiconductor devices. Micro-electromechanical devices

£38.40 members, £40.00 non-members JPEL/64

IEC 60512:— Connectors for electrical equipment. Tests and measurements

IEC/TR 61258:2008

IEC 62047-4:2008

(Edition 2)

Generic specification for MEMS £65.28 members, £68.00 non-members

Guidelines for the development and use of medical electrical equipment educational materials £50.88 members, £53.00 non-members CH/62/1

IEC 60512-25-9:2008 Signal integrity tests. Test 25i. Alien crosstalk £65.28 members, £68.00 non-members

IEC 61290:— Optical amplifiers. Test methods

EPL/48

IEC 60700:— Thyristor valves for high voltage direct current (HVDC) power transmission

IEC 60700-1:—

IEC 62127:— Ultrasonics. Hydrophones

IEC 62127-1:— Measurement and characterization of medical ultrasonic fields up to 40 MHz

IEC 61290-3:2008


(Edition 2)

to IEC 62127-1:2007

Noise figure parameters £38.40 members, £40.00 non-members

EPL/87

GEL/86/3

IEC 62127-2:—

Electrical testing

IEC 61291:—


Optical amplifiers

Calibration for ultrasonic fields up to 40 MHz CORRIGENDUM 1:August 2008

to IEC 62127-2:2007

to IEC 60700-1:1998 £31.68 members, £33.00 non-members

IEC 61291-6-1:2008

PEL/22

Interfaces. Command set £78.72 members, £82.00 non-members

IEC 60810:—

EPL/47

GEL/86/3

EPL/87

IEC 62317:— Ferrite cores. Dimensions

Lamps for road vehicles. Performance requirements

IEC 61400:—


Wind turbines

IEC 62317-14:2008

IEC 61400-21:2008

EFD-cores for use in power supply applications £35.52 members, £37.00 non-members

(Edition 2)

EPL/51

to IEC 60810:2003 £17.28 members, £18.00 non-members CPL/34/1

IEC 60825:—

Measurement and assessment of power quality characteristics of grid connected wind turbines £137.28 members, £143.00 non-members

Safety of laser products

PEL/88

IEC 60825-1:—

to IEC 60825-1:2007 EPL/76

PEL/88



Power systems management and associated information exchange. Data and communications security

IEC 61400-25-4:2008 Communications for monitoring and control of wind power plants. Mapping to communication profile £201.60 members, £210.00 non-members

Equipment classification and requirements

IEC/TS 62351:—

IEC/TS 62351-2:2008 Glossary of terms £137.28 members, £143.00 non-members PEL/57


51

IEC Publications continued... IEC/TS 62369:— Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz

IEC/TS 62369-1:2008 Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems £156.48 members, £163.00 non-members

ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

ISO 3185:2008 (Edition 2) Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions £28.80 members, £30.00 non-members ACE/12

Will be implemented as an identical British Standard

GEL/106

IEC/TS 62396-2:2008 Guidelines for single event effects testing for avionics systems £86.40 members, £90.00 non-members GEL/107

ISO 488:2008

ISO 3186:2008

(Edition 2)

(Edition 2)

Milk. Determination of fat content. Gerber butyrometers £54.72 members, £57.00 non-members

Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions £28.80 members, £30.00 non-members

AW/5


ACE/12

IEC/TS 62396-3:2008

ISO 707:2008

Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation £78.72 members, £82.00 non-members

(Edition 3)

GEL/107

AW/5

Milk and milk products. Guidance on sampling £91.20 members, £95.00 non-members Will be implemented as an identical British Standard

IEC/TS 62396-5:2008

ISO 1503:2008

Guidelines for assessing thermal neutron fluxes and effects in avionics systems £65.28 members, £68.00 non-members

(Edition 2)

GEL/107

Spatial orientation and direction of movement. Ergonomic requirements £94.08 members, £98.00 non-members


ISO 3193:2008 (Edition 2) Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions £28.80 members, £30.00 non-members ACE/12


PH/9

IEC 62424:2008 Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools £180.48 members, £188.00 non-members GEL/65

IEC 62494:— Medical electrical equipment. Exposure index of digital X-ray imaging systems


Non-destructive testing. Penetrant testing

ISO 1683:2008 (Edition 2) Acoustics. Preferred reference values for acoustical and vibratory levels £28.80 members, £30.00 non-members

CH/62/2

General principles £45.12 members, £47.00 non-members WEE/46


Will not be implemented as a British Standard

(Edition 2) Definitions and requirements for general radiography £65.28 members, £68.00 non-members

ISO 3452-1:2008

EH/1

ISO 1952:2008 IEC 62494-1:2008

ISO 3452:—

Solid mineral fuels. Determination of extractable metals in dilute hydrochloric acid £33.60 members, £35.00 non-members PTI/16


ISO 3471:2008 (Edition 4) Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements £86.40 members, £90.00 non-members B/513/1


ISO 2393:2008

IEC/PAS PUBLICATIONS IEC/PAS 60704:— Household and similar electrical appliances. Test code for the determination of airborne acoustical noise

(Edition 3) Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures £73.92 members, £77.00 non-members

ISO 3767:— Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays

PRI/22


ISO 3767-4:— ISO 2446:2008

Symbols for forestry machinery

(Edition 2)


Particular requirements for household food waste disposers £41.28 members, £43.00 non-members

Milk. Determination of fat content £49.92 members, £52.00 non-members

to ISO 3767-4:1993

AW/5

AGE/6

CPL/59



IEC/PAS 60704-2-15:2008

52




ISO Publications continued... ISO 3858:2008

ISO 5857:2008

ISO 7714:2008

(Edition 3)

(Edition 2)

(Edition 4)

Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract £33.60 members, £35.00 non-members

Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification £70.08 members, £73.00 non-members

Agricultural irrigation equipment. Volumetric valves. General requirements and test methods £54.72 members, £57.00 non-members

PRI/50

ACE/12




ISO 5951:2008 ISO 4254:— Agricultural machinery. Safety

ISO 4254-5:2008 (Edition 2) Power-driven soil-working machines £54.72 members, £57.00 non-members AGE/6


ISO 4521:2008 (Edition 2) Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods £65.28 members, £68.00 non-members STI/33

Will be implemented as a related British Standard

(Edition 4) Hot-rolled steel sheet of higher yield strength with improved formability £38.40 members, £40.00 non-members

AGE/30

ISO 8168:2008 (Edition 2)

ISE/10

Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1100 MPa. Procurement specification £65.28 members, £68.00 non-members


ACE/12


ISO 6401:2008 (Edition 2) Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gaschromatographic method £33.60 members, £35.00 non-members PRI/21


ISO 8423:2008 (Edition 2) Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) £83.52 members, £87.00 non-members SS/5

ISO 6803:2008


(Edition 3) Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing £33.60 members, £35.00 non-members PRI/66


Hot-rolled steel sheet of structural quality £38.40 members, £40.00 non-members

ISO 6872:2008

Aerospace. Self-locking nuts with maximum operating temperature greater than 425°C. Procurement specification £70.08 members, £73.00 non-members

(Edition 3)

ACE/12

ISE/10

Dentistry. Ceramic materials £73.92 members, £77.00 non-members


ISO 4995:2008


(Edition 5)


CH/106/2

ISO 5675:2008 (Edition 3) Agricultural tractors and machinery. General purpose quick-action hydraulic couplers £33.60 members, £35.00 non-members AGE/6




ISO 6914:2008 (Edition 3) Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension £38.40 members, £40.00 non-members

Aerospace. Self-locking nuts with maximum operating temperature greater than 425°C. Test methods £65.28 members, £68.00 non-members ACE/12


PRI/22

ISO 5771:2008 (Edition 3) Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification £54.72 members, £57.00 non-members PRI/66



ISO 9255:2008 ISO 6932:2008

(Edition 2)

(Edition 3)

Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions £28.80 members, £30.00 non-members

Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % £54.72 members, £57.00 non-members ISE/10


ISO 5856:2008 (Edition 2) Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions £28.80 members, £30.00 non-members

ISO 7304:— Alimentary pasta produced from durum wheat semolina. Estimation of cooking quality by sensory analysis

ACE/12


ISO 10384:2008 (Edition 3)

ISO 7304-2:2008 Routine method £49.92 members, £52.00 non-members

Hot-rolled carbon steel sheet as defined by chemical composition £45.12 members, £47.00 non-members

ACE/12

AW/4

ISE/10




54



ISO Publications continued... ISO 10846:—

ISO 11500:2008

ISO 13736:2008

Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements

(Edition 2)

(Edition 2)

Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle £78.72 members, £82.00 non-members

Determination of flash point. Abel closed-cup method £70.08 members, £73.00 non-members

ISO 10846-1:2008 (Edition 2) Principles and guidelines £73.92 members, £77.00 non-members


MCE/18/-/6


ISO 13921:2008 (Edition 2)

EH/1/4


ISO 11596:2008

ISO 10846-2:2008

Jewellery. Sampling of precious metal alloys for and in jewellery and associated products £45.12 members, £47.00 non-members

(Edition 2)

STI/53

Direct method for determination of the dynamic stiffness of resilient supports for translatory motion £78.72 members, £82.00 non-members


EH/1/4

Non-destructive testing. Industrial radiographic film


PTI/13

Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions £28.80 members, £30.00 non-members ACE/12

ISO 11699:—


ISO/IEC 14165:— Information technology. Fibre channel

ISO 10846-5:2008 Driving point method for determination of the low frequency transfer stiffness of resilient supports for translatory motion £73.92 members, £77.00 non-members EH/1/4


ISO 11699-1:2008 (Edition 2) Classification of film systems for industrial radiography £45.12 members, £47.00 non-members WEE/-/1


ISO/IEC 14165-122:— Arbitrated loop-2 (FC-AL-2) AMENDMENT 1:August 2008

to ISO/IEC 14165-122:2005 £96.00 members, £100.00 non-members IST/6


ISO 11117:2008 (Edition 2)

ISO 11971:2008

ISO 15093:2008

Gas cylinders. Valve protection caps and valve guards. Design, construction and tests £45.12 members, £47.00 non-members

(Edition 2)

PVE/3/1

Steel and iron castings. Visual examination of surface quality £28.80 members, £30.00 non-members


ISE/6

Jewellery. Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys. Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES) £38.40 members, £40.00 non-members


STI/53


ISO 11193:— Single-use medical examination gloves

ISO 12578:2008

ISO 11193-1:2008

Timber structures. Glued laminated timber. Component performance and production requirements £54.72 members, £57.00 non-members

(Edition 2) Specification for gloves made from rubber latex or rubber solution £45.12 members, £47.00 non-members

B/518



ISO 12718:2008

ISO 11494:2008

Non-destructive testing. Eddy current testing. Vocabulary £94.08 members, £98.00 non-members

STI/53


Jewellery. Determination of silver in 999 0/00 silver jewellery alloys. Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES) £33.60 members, £35.00 non-members STI/53


CH/205/3

Jewellery. Determination of platinum in platinum jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element £33.60 members, £35.00 non-members

ISO 15096:2008

ISO/IEC 15408:— Information technology. Security techniques. Evaluation criteria for IT security

WEE/46


ISO/IEC 15408-2:2008 (Edition 3)

ISO 13628:— Petroleum and natural gas industries. Design and operation of subsea production systems

Security functional requirements £175.68 members, £183.00 non-members IST/33


ISO 11495:2008 Jewellery. Determination of palladium in palladium jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element £33.60 members, £35.00 non-members

ISO 13628-11:— Flexible pipe systems for subsea and marine applications

ISO/IEC 15408-3:2008


to ISO 13628-11:2007

Security assurance requirements £156.48 members, £163.00 non-members

STI/53

PSE/17/-/4

IST/33




56


(Edition 3)


ISO/IEC 15459:—

ISO 17491-4:2008

ISO 20541:2008

Information technology. Unique identifiers

Determination of resistance to penetration by a spray of liquid (spray test) £38.40 members, £40.00 non-members

Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction £57.60 members, £60.00 non-members

ISO/IEC 15459-4:2008 (Edition 2) Individual items

PH/3/3


AW/5



IST/34

ISO/IEC 18000:—


Information technology. Radio frequency identification for item management

ISO 20712:—

(Edition 2)

ISO/IEC 18000-3:2008

ISO 20712-3:2008

Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results

(Edition 2)

Guidance for use £73.92 members, £77.00 non-members

Water safety signs and beach safety flags

ISO 15882:2008


Parameters for air interface communications at 13,56 MHz £146.88 members, £153.00 non-members

LBI/35

IST/34


Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 16003:2008 Components for fire-extinguishing systems using gas. Requirements and test methods. Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves

ISO/IEC 18000-4:2008


IST/34

FSH/18/6


(Edition 2) Parameters for air interface communications at 2,45 GHz £129.60 members, £135.00 non-members

Information technology. Security techniques. Time-stamping services

Cryogenic vessels. Static vacuum-insulated vessels

ISO 21009-1:2008 Design, fabrication, inspection and tests £146.88 members, £153.00 non-members PVE/18

Intelligent transport systems. Communications access for land mobiles (CALM). Medium service access points £120.00 members, £125.00 non-members EPL/278

ISO/IEC 18014-1:2008


(Edition 2)

B/513/1

Framework £78.72 members, £82.00 non-members


ISO 21009:—

ISO 21218:2008 ISO/IEC 18014:—

Earth-moving machinery. Recyclability and recoverability. Terminology and calculation method




ISO 16714:2008

PH/8/2


ISO 21243:2008

ISO 16872:2008


Short link chains for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists

ISO/IEC 18045:2008

Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies. General principles and application to dicentric assay £70.08 members, £73.00 non-members

(Edition 2)

NCE/2

Information technology. Security techniques. Methodology for IT security evaluation £194.88 members, £203.00 non-members


IST/33

Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities £156.48 members, £163.00 non-members

IST/33

£54.72 members, £57.00 non-members MHE/1


ISO 16877:2008 Short link chains for lifting purposes. Grade TH, fine tolerance for manually operated chain hoists £54.72 members, £57.00 non-members MHE/1


ISO 17491:—


ISO 18938:2008 Imaging materials. Optical discs. Care and handling for extended storage £73.92 members, £77.00 non-members Will be implemented as an identical British Standard

ISO 17491-3:2008

Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings

PH/3/3

Will be implemented as an idential British Standard



ISO 22915:— Industrial trucks. Verification of stability

ISO/IEC 19776:—


PH/9

CPW/42

Protective clothing. Test methods for clothing providing protection against chemicals

Determination of resistance to penetration by a jet of liquid (jet test)

ISO/TR 22411:2008

ISO 22915-2:2008 Counterbalanced trucks with mast £33.60 members, £35.00 non-members MHE/7

ISO/IEC 19776-2:—


Classic VRML encoding AMENDMENT 1:May 2008

ISO 22915-3:2008

to ISO/IEC 19776-2:2005 £11.52 members, £12.00 non-members

Reach and straddle trucks £38.40 members, £40.00 non-members

IST/34

MHE/7




57

ISO Publications continued... ISO/IEC 23000:—

ISO 25537:2008

ISO 26825:2008

Information technology. Multimedia application format (MPEG-A)

Glass in building. Silvered flat-glass mirror £49.92 members, £52.00 non-members

Anaesthetic and respiratory equipment. Userapplied labels for syringes containing drugs used during anaesthesia. Colours, design and performance £33.60 members, £35.00 non-members

B/520/1

ISO/IEC 23000-5:2008


Media streaming application format £105.60 members, £110.00 non-members IST/37

CH/121/1

ISO 26428:—


Digital cinema (D-cinema) distribution master


ISO 26428-1:2008 ISO/IEC 23003:— Information technology. MPEG audio technologies

Analysis of blood for asphyxiant toxicants. Carbon monoxide and hydrogen cyanide £105.60 members, £110.00 non-members

CPW/36

FSH/16



ISO/IEC 23003-1:—

ISO 26428-3:2008

MPEG Surround

Audio channel mapping and channel labeling £45.12 members, £47.00 non-members


to ISO/IEC 23003-1:2007 £49.92 members, £52.00 non-members

CPW/36


Will be implemented as an identical British Standard MXF JPEG 2000 application £33.60 members, £35.00 non-members

MPEG Surround

CPW/36



to ISO/IEC 23003-1:2007

Will be implemented as an identical British Standard Composition playlist £78.72 members, £82.00 non-members Will be implemented as an identical British Standard

Textiles. Determination of dimensional change of fabrics. Accelerated machine method £38.40 members, £40.00 non-members TCI/82

ISO 26430:— Digital cinema (D-cinema) operations


Hygrothermal performance of building materials and products. Determination of moisture adsorption/desorption properties in response to humidity variation

Digital certificate £65.28 members, £68.00 non-members CPW/36



ISO 26431:—


Digital cinema (D-cinema) quality

Software engineering. Certification of software engineering professionals. Comparison framework £38.40 members, £40.00 non-members IST/15

Screen luminance level, chromaticity and uniformity £33.60 members, £35.00 non-members CPW/36


ISO 26603:2008

£28.80 members, £30.00 non-members PAI/11

PRI/72



58


Ships and marine technology. Marine evacuation systems. Means of communication £33.60 members, £35.00 non-members SME/32/-/1


Safety of machinery. Evaluation of the emission of airborne hazardous substances

Please do not send confirmation of

Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine £45.12 members, £47.00 non-members

Paper, board and pulps. Basic guidelines for image analysis measurements

STI/33

ISO 26431-1:2008


ISO/TR 25477:2008

Metallic and other inorganic coatings. Guidelines for specifying metallic and inorganic coatings £54.72 members, £57.00 non-members

ISO 29042:—

B/540/8

ISO/IEC 24773:2008

ISO 27830:2008

ISO 27991:2008 ISO 26430-2:2008

ISO 24353:2008

Rubber, vulcanized. Measurement of fatigue crack growth rate £45.12 members, £47.00 non-members

ISO 26429-7:2008

CPW/36

ISO 23231:2008

ISO 27727:2008

PRI/22

£11.52 members, £12.00 non-members Will be implemented as an identical British Standard

Nanotechnologies. Terminology and definitions for nano-objects. Nanoparticle, nanofibre and nanoplate £38.40 members, £40.00 non-members

ISO 26429-4:2008

ISO/IEC 23003-1:—

IST/37

ISO/TS 27687:2008

NTI/1

IST/37


ISO 27368:2008

Image characteristics £33.60 members, £35.00 non-members


orders placed by telephone as it can lead to duplication


Update Standards - October 2008 - BSI Shop

Update Standards - October 2008 - BSI Shop

Suggest Documents

Update Standards - June 2008 - BSI Shop

Update Standards - August 2008 - BSI Shop

Update Standards - February 2008 - BSI Shop

Update Standards - October 2013 - BSI Shop

Update Standards - June 2009 - BSI Shop

Update Standards - March 2009 - BSI Shop

Update Standards - November 2013 - BSI Shop

Update Standards - February 2007 - BSI Shop

Update Standards - September 2005 - BSI Shop

Update Standards - July 2013 - BSI Shop

Update Standards - May 2013 - BSI Shop

Update Standards - August 2006 - BSI Shop

Update Standards - February 2009 - BSI Shop

Update Standards - January 2005 - BSI Shop

Update Standards - June 2007 - BSI Shop

BSI Standards Update Aug 2013_Layout 1 - BSI Shop

BRITISH STANDARDS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop

BRITISH STANDARDS BS EN PUBLICATIONS - BSI Shop