Jun 1, 2014 ... ... experience in the world of cutting and welding technology. ... Demonstrate
modern welding techniques and skills to enhance employability. 5.
Welding Program Assessment Plan Date Submitted: 1. College:
Northshore Technical Community College
3. Program:
Welding Program
5. College Mission & Vision:
2. Division:
June 1, 2014
Technical Studies
4. Exit TCA, CTS, TD, and AAS Points: Mission: Northshore Technical Community College is committed to providing quality workforce training and transfer opportunities by awarding associate degrees, technical diplomas and certificates to students seeking a competitive edge in today’s global economy. Vision: In keeping with the vision of the Louisiana Community and Technical College System, the Northshore Technical Community College: Produces knowledgeable, skilled and confident citizens ready for the future, ready for the workplace and ready to continue learning. Delivers rapid, flexible and innovative solutions to changing workforce needs.
The mission of the Welding Program is to provide instruction and related hands-on experience in the world of cutting and welding technology. Students demonstrate competency in each of the following areas:
6. Unit Purpose/Mission Statement:
1. Demonstrate knowledge in safety procedures, hazards, housekeeping, and appropriate cautions in the welding industry. 2. Demonstrate fundamental proficiencies in the use of hand tools, portable, and power equipment. 3. Demonstrate a working knowledge of drawings and specifications related to welding problems and jobs. 4. Demonstrate modern welding techniques and skills to enhance employability. 5. Demonstrate modern cutting techniques and skills to enhance employability.
(A) Unit Goal #1
Demonstrate knowledge in safety procedures, hazards, housekeeping, and appropriate cautions in the welding industry. Year 1
Year 2 (F) When Assessed
(C) Assessment Method
(D) D/I
(E) Who Conducts
At least 70% of Welding students will display the ability to inspect and properly don and remove personal protective equipment.
Performance Evaluation and Rubric (Module 00101-09 in NCCER Core Curriculum Book.)
D
Instructor
WELD 1110 Fall
At least 70% of Welding students will demonstrate a knowledge of OSHA Safety Standards as they relate to respiratory equipment.
Written Exam (Module 00101-09 in NCCER Core Curriculum Book.)
D
Instructor
WELD 1110 Fall
(B) Measurable Outcomes
(G) Findings
(H) Use of Results
(A) Unit Goal #2
Demonstrate fundamental proficiencies in the use of hand tools, portable, and power equipment. Year 1
Year 2 (F) When Assessed
(C) Assessment Method
(D) D/I
(E) Who Conducts
At least 70% of Welding students will demonstrate proficient use of an electric drill.
Performance Evaluation and Rubric (Module 00104-09 in NCCER Core Curriculum Book.)
D
Instructor
WELD 1110 Spring
At least 70% of Welding Program students will be able to identify a reciprocating saw.
Written Exam (Module 00104-09 in NCCER Core Curriculum Book.)
D
Instructor
WELD 1110 Spring
(B) Measurable Outcomes
(G) Findings
(H) Use of Results
(A) Unit Goal #3
Analyze drawings and specifications related to welding problems and jobs. Year 1
(B) Measurable Outcomes
(C) Assessment Method
Year 2 (D) D/I
(E) Who Conducts
(F) When Assessed
At least 70% of Welding students will display the ability to interpret elevation listed on a construction drawing.
Performance Evaluation and Rubric (Module 29202-09 in NCCER Welding Level 2 Book.)
D
Instructor
WELD 1120 Spring
At least 70% of Welding students will demonstrate a knowledge of the different parts within a construction drawing.
Written Exam (Module 29202-09 in NCCER Welding Level 2 Book.)
D
Instructor
WELD 1120 Spring
(G) Findings
(H) Use of Results
(A) Unit Goal #4
Demonstrate modern welding techniques and skills to enhance employability. Year 1
Year 2 (F) When Assessed
(B) Measurable Outcomes
(C) Assessment Method
(D) D/I
(E) Who Conducts
At least 70% of Welding students will display the ability to perform gas tungsten arc welds on a carbon steel plate coupon.
Performance Evaluation and Rubric (Module 29208-09 in NCCER Welding 2 Book.)
D
Instructor
WELD 2210 Fall
At least 70% of Welding students will identify the parts of a gas tungsten arc equipment.
Written Exam (Module 29208-09 in NCCER Welding Level 2 Book.)
D
Instructor
WELD 2210 Fall
(G) Findings
(H) Use of Results
(A) Unit Goal #5
Demonstrate modern cutting techniques and skills to enhance employability. Year 1
(B) Measurable Outcomes
(C) Assessment Method
Year 2 (D) D/I
(E) Who Conducts
(F) When Assessed
At least 70% of Welding students will demonstrate the ability to perform oxyfuel cutting-straight line bevel cuts.
Performance Evaluation and Rubric (Module 29102-09 in NCCER Welding Level 1 Book.)
D
Instructor
WELD 1210 Fall
At least 70% on Welding students will demonstrate the ability to perform straight line cuts using plasma arc cutter.
Performance Evaluation and Rubric (Module 29102-09 in NCCER Welding Level 1 Book.)
D
Instructor
WELD 1310 Fall
(G) Findings
(H) Use of Results
