uses wifi signals to control the car making it free from interference from other
devices. Please read this instruction manual carefully, and retain for future use.
WIFI JEEP CAMERA ITEM NUMBER : GEA6801
Our FG Toys Spy car is wifi controlled, all of the controls are digitally proportional. It also has a 300,000 pixel camera built in. You can move the car forwards/backwards and left/right. You can get realtime video beamed directly to your wifi device, giving you the option to take photos and video recordings. It uses wifi signals to control the car making it free from interference from other devices. Please read this instruction manual carefully, and retain for future use. Happy driving! Installing the batteries: Remove the battery cover on the bottom of the car. Plug in the battery. Then replace the plate and screw (Picture 1). Battery charging: Remove the battery cover and unplug the battery. Connect the battery to the AC wall charger (picture 2). Charging takes 4 hours. Make sure to disconnect the battery from the AC wall charger when charge is complete. Then replace the battery and cover.
Switch the car ON (picture 3). Start your wifi device and search for a wifi hotspot relating to the car (every cars wifi hospot is different). Then connect to it (see picture 4)
Download the APP “i-scope” from the App store or Android marketplace, and install it (picture 5). Open “i-scope” and choose R/C car from the menu (picture 6 and 7).
Throttle stick and steering control: When you make a small movement of any control sticks the car will make small proportional movement. When you make a large movement of the stick the car will make a larger proportional movement.
When you push the throttle stick the car moves forward.
When you push the throttle stick down the car moves backwards.
Push the throttle stick and slide your thumb to the left at the same time, the car will move forward and turn left.
Push the throttle stick up and slide your thumb to the right at the same time, the car will move forwards and turn to the right.
Push the throttle stick down and slide your thumb to the left at the same time, the car will move backwards and turn left.
Push the throttle stick down and slide your thumb to the right at the same time, the car will move backwards and turn to the right.
Press the “G-sensor” button, and you will be able to tilt your wifi control device in the direction you want the car to go. The controls are also proportional to the amount you move it (see instructions below).
The camera switch on the App controller is for making the camera come out and go back in to the front of the car. When you press the camera switch button and slide your thumb up the camera will come out the front of the car. When you slide your finger down it will go back in to the car. The camera trimmer buttons are for controlling the angle of the camera with a maximum of 90 degrees. Press the “camera up trimmer” you can control the camera angle up and press “camera down trimmer” you can control the angle of the camera down. This product contains small parts that can be a choking hazard to small children. Please keep this product out of small childrens reach. For parts or advice:
[email protected] 0208 952 0471
