Wireless Adaptor Application Guide

Wireless Adaptor Application Guide

Before Star up Before applying Edimax Access Point as your Wireless Adaptor for wired devices, please check the following items: 1. You need to have a wireless router connected 2. You need to have a PC (or notebook) for setting 3. You need a RJ-45 cable to connect the Access Point with your wired device. 4. Make sure that the IP address for the connected router is 192.168.2.1. (Edimax Router use 192.168.2.1 as default settings) 5. Change the Router’s SSID. (We changed the Router’s SSID to “Edimax1” for the application guide)

Step by Step settings Step 1: Connect your PC (notebook) with Edimax Access Points by using a RJ-45 cable. (Use 192.168.2.1 as default IP address)

Step by Step settings Step 2:

Connected to Edimax Access Points and select System Utility

Step by Step settings Step 3:

Change the IP address to 192.168.2.2

Step by Step settings Step 4: 1. Select Basic Setting 2. Select “Station Infrastructures”

3. Select Site Survey

Step by Step settings Step 5 (Part 1 of 2):

Select the router which connects to the internet

Step by Step settings Step 5 (Part 2 of 2):

Check if the selected router is correct then click “Apply”

Step by Step settings Step 6: Connect the Access Point with the device as following diagram

Benefits 1.

Edimax 802.11n Access Point could be your best choice to extend the signal coverage and quality for your XBOX360 or PS3 gaming consoles. Let you enjoy the online gaming without suffering bad wireless signals.

2.

Edimax 802.11n Access Point could let your wired devices such as Media adaptors or NAS become wireless device.

3.

No program installation needed. No long distance cable wiring required. It is easy and it is reliable.