Items 95 - 930 - $770.00. Laser line marker. & see-through chuck guard included ..... Heavy-duty casting (45 000 P.S
Promotion
WORKING Machinery SPRING / SUMMER 2011
Horizontal or vertical cutting
$1274.99
New
Reg. $1700.00
Model 90-730 M1
7" X 12" METAL CUTTING BANDSAW • • • • • •
Model 34-156V M1 (variable speed)
15” DRILL PRESS • Variable speed hand wheel adjustment sets the speed from 400 to 5000 RPM. • Large front-mounted paddle style stop switch. • Extra long 6” quill stroke and heavy-duty positive depth stop. • Precision machined steel column for smooth table and head adjustments. • 1 HP motor.
Model 60-250 M1
12” SLOW SPEED COLD CUT SAW • • • • •
$1749.99 Reg. $2100.00
See-through chuck guard included Model 75-600 M1
Automatic shut-off. Chip brush and safety guard included. Adjustable hydraulic down feed control. Coolant system with built-in tank and pump. 4 speed design (86, 132, 178, 260 FPM). 1 HP motor.
Stand included
Miter stops at 90°, 45° left and 45° right. Coolant pump. 52 RPM blade speed for cutting ferrous materials. Magnetic switch with overload protection. 2 1/2 HP motor.
$1799.99 Reg. $2500.00
Large paddlestyle stop switch
RADIAL ARM DRILL PRESS
Model 15-920 M1
• Extended head capacity allows for adjustable distance up to 20 1/2” from column to chuck. • Head tilts up to 30° left or right and swivels 360° for operations either on or off the table. • Easy to read head tilt angle indicator. • 9 spindle speeds (290, 405, 465, 655, 780, 990, 1795, 2660 & 3725 RPM). • 3/4 HP motor.
12” HEAVY DUTY BENCH GRINDER
$1619.99 Reg. $2160.00
• Permanently lubricated double sealed bearings. • Cast-iron wheel guards and dust vents. • Heavy-duty cast tool rests. • 1 1/2 HP motor.
$949.99 Reg. $1175.00
DRILL PRESSES
Model 75-915 M1
ELECTRONIC VARIABLE SPEED DRILL PRESS •
•
•
•
Front mounted digital spindle speed display. Electronic variable speed control adjusts spindle speed from 150 to 3000 RPM. Large mushroom style emergency stop button. Forward/reverse tapping system. 2 HP motor.
$2449.99 •
Reg. $3365.00
Laser line marker & see-through chuck guard included
See-through chuck guard included Model 75-550 M1
31” RADIAL ARM DRILL PRESS • 5/8” chuck with key. • Table swivels 360° for operations either on or off the table. • 9 spindle speeds (295 to 3580 RPM). • 1/2 HP motor.
$629.99 Reg. $770.00
Laser line marker & see-through chuck guard included
Model 75-260 M1
Model 75-500 M1
17” EXTENDED STROKE DRILL PRESS
22” DRILL PRESS
• 3/4” chuck with key. • Extra long 6” stroke, drills deeper than most drill presses. • 12 spindle speeds (255 to 2750 RPM). • 1 HP motor.
$749.99 Reg. $975.00
Laser line marker & see-through chuck guard included
• 3/4” chuck with key. • Rotating, 45° tilting, crank-operated work table with quick release clamp. • 12 spindle speeds (120 to 2270 RPM). • 1 HP motor.
$899.99 Reg. $1270.00
Laser line marker & see-through chuck guard included
New Model 34-156 M1 (6 speed)
15” DRILL PRESS • Cover opening designed for quick and easy speed changes. • 6 speeds: 400, 625, 1125, 1950, 3400 and 5000 RPM. • Large front-mounted paddle style stop switch. • Extra long 6” quill stroke and heavy-duty positive depth stop. • Precision machined steel column for smooth table and head adjustments. • 1 HP motor.
$1529.99 Reg. $1900.00
Laser line marker & see-through chuck guard included Model 75-700 M1
17” ELECTRONIC VARIABLE SPEED DRILL PRESS • 5/8” regular chuck with key. • Front mounted digital spindle speed display. • Electronic inverter variable control adjusts spindle speed from 280-3200 RPM. • 1 HP motor.
$1699.99 Reg. $2200.00
Laser line marker & see-through chuck guard included
Model 75-150 M1
Model 75-160 M1
14” DRILL PRESS
16” DRILL PRESS
17” DRILL PRESS
• 5/8” chuck with key. • Rotating, 45° tilting, crankoperated worktable with quick release clamp. • 12 spindle sppeds (280 to 3000 RPM). • Heavy-duty positive depth stop for quick adjustment. • 1/2 HP motor.
• 5/8” chuck with key. • Rotating, 45° tilting, crankoperated worktable with quick release clamp. • 12 spindle sppeds (280 to 3000 RPM). • Heavy-duty positive depth stop for quick adjustment. • 1/2 HP motor.
• 5/8” chuck with key. • Rotating, 45° tilting, crankoperated worktable with quick release clamp. • 12 spindle sppeds (340 to 2800 RPM). • Heavy-duty positive depth stop for quick adjustment. • 3/4 HP motor.
$369.99 Reg. $470.00
$394.99 Reg. $495.00
Model 75-200RC M1
$529.99 Reg. $730.00
CROSS VISES
DRILL PRESS VISES
• Rugged cast-iron construction for a lifetime of durability. • Dual crank-type handles control movement of jaws in each direction. • Fast action, “Acme” type threaded rod, guides the jaws and maintains accurate alignment.
• One-piece cast-iron axial sleeve and movable jaws. • Precision machined center slide bar assures an even 360° contact.
4”
5”
6”
4”
$18.99 $29.99 $32.99 Model 95-140
Model 95-150
Model 95-160
Reg. $28.00
Reg. $42.00
Reg. $55.00
Bench-top model
5”
$64.99 $69.99 $89.99 Model 95-500
Model 95-600
Reg. $90.00
Reg. $125.00
Reg. $152.00
Will allow you to do drilling, milling, tapping, boring and reaming
Model 75-850 M1
MILLING / DRILLING MACHINE
Magnetic switch and electronically controlled circuitry for added safety (75-850).
$2129.99
Forward and reverse operation, ideal for tapping (75-850).
Reg. $2700.00
• Head swivels 360º. • See-through chuck guard provides full 180° frontal protection. • 12 speeds from 120 to 2500 RPM. • Adjustable stops on table. • Included accessories: 1/2" chuck, 1/2" chuck arbor, 3" cutter, 3" cutter arbor, angle vise. • 2 HP motor.
Circuit breaker provides power surge/overload protection for motor, switch and all circuitry ( 75-850).
Models 75-870 M1 / 75-875 M1
Shown with optional stand (#75-855)
$249.99
GEARED HEAD MILLING / DRILLING MACHINE • Forward and reverse switch. • 6 spindle speeds (60, 130, 230, 450, 800 & 1500 RPM). • See-through chuck guard included. • Powered spindle down feed (75-875 only). • 1 1/2 HP motor.
Reg. $350.00
• • • • •
Forward and reverse switch. 6 spindle speeds (60, 130, 230, 450, 800 & 1500 RPM). See-through chuck guard included. Powered spindle down feed. 1 1/2 HP motor.
$4299.99
Bench-top model Floor model
$239.99 Reg. $350.00
Reg. $6200.00
Also available optional stand (Item #75-885) for models 75-875 and 75-880 only.
75-870
GEARED HEAD MILLING / DRILLING MACHINE
Head tilts up to 30º left and 90º right for angle drilling, milling, slotting and more
75-870
Model 75-880 M1
75-875
Bench-top model
6”
Model 95-400
75-875
ABOUT DRILLING
Items 95-400/500/600 Items 95-140/150/160
$3549.99 Reg. $5000.00
$3799.99 Reg. $5400.00
BANDSAWS
Horizontal or vertical cutting Model 90-740 M1
7" X 10" SWIVEL HEAD METAL CUTTING HORIZONTAL BANDSAW
Model 90-660 M1
5" X 6" METAL CUTTING BANDSAW
• Head swivel 0-45º on heavyduty cast-iron slides. • Equipped with coolant system with built-in tank and pump. • 4 blade speeds (73, 110, 150, 217 FPM). • 1 HP motor.
$1949.99
$469.99
Reg. $2650.00
Reg. $595.00
• Automatic shut-off at the end of cutting cycle. • Adjustable tension spring down feed control. • Fully adjustable blade guide bearings. • 3 blade speeds (80, 120 & 200 FPM). • 1/2 HP motor.
Model 90-700 M1
7" X 12" METAL CUTTING BANDSAW
$1369.99 Reg. $1750.00
• Automatic shut-off. • Versatile metal cutting bandsaw with vertical raising head, horizontal cut and a removable worktable. • Coolant system with built-in tank and pump. • 3 speed quick change gear box (85, 145, 180 FPM). • 1 HP motor.
Horizontal or vertical cutting
Model 90-725 M1
7" X 12" METAL CUTTING BANDSAW • • • • • •
Automatic shut-off. Coolant system with built-in tank and pump. Quick-adjust vise with full 90º to 45º mitering. Adjustable hydraulic down feed control. 4 speed design (86, 132, 178, 260 FPM). 1 HP motor.
$1549.99 Reg. $1990.00
Item 70-200
Item 90-805
Item 90-810
HYDRAULIC PRESS
HEAVY-DUTY ROLLER STAND
HEAVY-DUTY ROLLER STAND
• Heavy-duty cast-iron & steel construction. • Chrome-plated ball bearing roller. • Adjustable height to suit most shop needs.
• Heavy-duty cast-iron & steel construction. • Chrome-plated ball bearing roller. • Adjustable height to suit most shop needs.
• • • • • •
20 ton capacity. Reinforced head plate. 2 speed manual jack. Self retracting ram. Multi-position press bed. Pressure gauge included.
$524.99 Reg. $630.00
$132.99 Reg. $180.00
$139.99 Reg. $185.00
LATHES $2639.99 25-350 (10” x 22”)
Reg. $3500.00
$4229.99
$2859.99
25-365 (11” x 28”)
25-355 (10” x 22”)
Reg. $5725.00
Reg. $4100.00
Models 25-350 M1 / 25-355 M1 / 25-365 M1
METAL LATHE WITH STAND • • • • • • • •
Steady and follow rest included. Pulley case and chuck guard both equipped with auto shut-off safety switch. 22” distance between centers (25-350 /25-355). 26” distance between centers (25-365). Digital speed display (25-355 /25-365). 6 spindle speeds (125, 210, 420, 620, 1000 & 2000 RPM) (25-350). Variable spindle speeds (100-2000 RPM) (25-355). Variable spindle speeds (50-2150 RPM) (25-365).
Model 25-450 M1, M2
14" X 40" DELUXE METAL LATHE WITH STAND • • •
Shown with optional stand (# 25-405)
$439.99
GEARED HEAD BENCH LATHE
• • • •
$8999.99 (14” X 40”)
Reg. $625.00
Model 25-400 M1 • •
• • •
Starting lever is equipped with safety device. Hardened and ground bedways and headstock gears. Automatic overload and obstacle activated safety feed shut-off. Steady Rest / Follow Rest. 9 spindle speeds (82-2000 RPM). Available with either 2 HP single phase (M1) or 3 HP three phase motors (M2).
$4586.99 (14” x 40”)
40” distance between centers. Reg. $7500.00 Headstock runs on 2 precision tapered roller bearings with a 38 mm through-hole. 40 feed rate gearbox with 28 metric or 50 imperial thread sizes. High tensile cast iron bed for maximum stability. 12 spindle speeds (70-1350 RPM). 1 1/2 HP motor.
Reg. $12000.00
GRINDERS
Item 15-910 M1
$349.99
$209.99
Item 15-870 M1
10” HEAVY DUTY BENCH GRINDER Reg. $490.00
8” HEAVY DUTY BENCH GRINDER
• • • • •
• • • • •
Cast-iron wheel guards and dust vents. One-piece, quick adjusting spark guards. Large quick adjust eye shields. Easy-adjust cast tool rests. 1.5 HP motor.
Reg. $260.00
Cast-iron wheel guards and dust vents. One-piece, quick adjusting spark guards. Large quick adjust eye shields. Easy-adjust cast tool rests. 1 HP motor.
New
Item 15-232 M1
BELT SANDER / GRINDER • Flexible “gooseneck” style work light. • Quick change belt tension lever facilitates fast belt changes. • Belt sander operates horizontally and vertically. • 1/3 HP motor.
Item 10-630
30” OSCILLATING FAN • 3 speed settings. • Adjustable height. • 1/4 HP motor.
$339.99
$199.99
Reg. $495.00
Reg. $245.00
Items 95-930/940/950/960/980/990
SWIVEL BASE BENCH VISES
Items 95-860
6” INDUSTRIAL BENCH VISE
$249.99
Reg. $360.00 • Large built-in anvil. • Heavy-duty casting (45 000 P.S.I.). • Accessible oil pots of easy maintenance.
3”
4”
$55.99 $69.99 Model 95-930
Model 95-940
Reg. $65.00
Reg. $80.00
• Unbreakable all steel construction. • Removable jaws and built-in pipe vise. • “Acme” type threads for fast action and greater precision. • Built-in anvil. • Swivel base with 2 clamping keys.
5”
6”
$82.99 $104.99 Model 95-950
8”
Reg. $100.00
Model 95-960
10”
Reg. $120.00
$134.99 $194.99
Prices are in effect from March 1st to August 31st, 2011 WE RESERVE THE RIGHT TO CORRECT ANY TYPOGRAPHICAL AND PICTORIAL ERRORS WITHOUT NOTICE.
Model 95-980
Model 95-990
Reg. $155.00
Reg. $220.00
