19

7 downloads 186 Views 2MB Size Report
ß. Cutting eng/OP www.hhw.de. 19.1. 1. Adjustable Circle Cutters. Type. Circle cutter with 1 straight HSS-E bit (not for draw cuts). Application. For fixed drilling ...
ß

Cutting Adjustable Circle Cutters

19015

19015 103

19015 101 Type Liliput Cutting range 18-80 mm, shank Ø 10 mm.

Type Circle cutter with 1 straight HSS-E bit (not for draw cuts). Application For fixed drilling machines. For cutting out holes, discs, and rings.

19015 103 Type 00 Cutting range 30-200 mm, shank Ø 12 mm.

Note: Do not use in high-speed machines! Not for use with wood!

19015 104 Type 00 Cutting range 30-200 mm, shank MT 2. 19015 105 Type 00 Cutting range 30-200 mm, shank MT 3.

19015 104

19015 106 Type 00a Cutting range 30-400 mm, shank MT 3.

Type Liliput 00 00 00 00a

Cutting range Ø mm 18-80 30-200 30-200 30-200 30-400

Shank Ø mm 10 12 – – –

Shank MT – – 2 3 3

19015

… 101 103 104 105 106

Spare Bits and Bit Holders for Circle Cutters

19026 - 19028 For use with type

Liliput 19026

Type Bit, with draw cut, for sheet metal up to 5 mm, steel, non-ferrous or light metal, made of HSS-E Bit, oblique, for metal up to 5 mm, with carbide tip. 19026 101-102



00 + 00a 19027



101

101

102

102

00a 19028



19027 101-102

Additional bit holder, for oblique bits end-no. 101 and 102.

104

Bit, for insulation, plastic panels, rubber, leather with a max. thickness of approx. 10 mm, HSS-E

105

105

Bit, for plastics up to approx. 30 mm, and Novotex, Pertinax, plexiglas etc., made of HSS-E

106

106

Bit, for plastics up to approx. 30 mm, and Novotex, Pertinax, plexiglas etc., carbide-tipped

107

107

19026 105

19026 106-107

Additional bit holder, for straight bits end-no. 105, 106 and 107.

19027 105

19027 106-107

109

Bit, reinforced, for sheet metal up to approx. 12 mm and boreholes from approx. 34 up to approx. 150 mm Ø, made of HSS-E

111

19028 111

Special bit holder, for reinforced HSS-E bits end-no. 111. HSS-E Al10%Si 35-50

Cu 25-40

St