ß. Cutting eng/OP www.hhw.de. 19.1. 1. Adjustable Circle Cutters. Type. Circle
cutter with 1 straight HSS-E bit (not for draw cuts). Application. For fixed drilling ...
ß
Cutting Adjustable Circle Cutters
19015
19015 103
19015 101 Type Liliput Cutting range 18-80 mm, shank Ø 10 mm.
Type Circle cutter with 1 straight HSS-E bit (not for draw cuts). Application For fixed drilling machines. For cutting out holes, discs, and rings.
19015 103 Type 00 Cutting range 30-200 mm, shank Ø 12 mm.
Note: Do not use in high-speed machines! Not for use with wood!
19015 104 Type 00 Cutting range 30-200 mm, shank MT 2. 19015 105 Type 00 Cutting range 30-200 mm, shank MT 3.
19015 104
19015 106 Type 00a Cutting range 30-400 mm, shank MT 3.
Type Liliput 00 00 00 00a
Cutting range Ø mm 18-80 30-200 30-200 30-200 30-400
Shank Ø mm 10 12 – – –
Shank MT – – 2 3 3
19015
… 101 103 104 105 106
Spare Bits and Bit Holders for Circle Cutters
19026 - 19028 For use with type
Liliput 19026
Type Bit, with draw cut, for sheet metal up to 5 mm, steel, non-ferrous or light metal, made of HSS-E Bit, oblique, for metal up to 5 mm, with carbide tip. 19026 101-102
…
00 + 00a 19027
…
101
101
102
102
00a 19028
…
19027 101-102
Additional bit holder, for oblique bits end-no. 101 and 102.
104
Bit, for insulation, plastic panels, rubber, leather with a max. thickness of approx. 10 mm, HSS-E
105
105
Bit, for plastics up to approx. 30 mm, and Novotex, Pertinax, plexiglas etc., made of HSS-E
106
106
Bit, for plastics up to approx. 30 mm, and Novotex, Pertinax, plexiglas etc., carbide-tipped
107
107
19026 105
19026 106-107
Additional bit holder, for straight bits end-no. 105, 106 and 107.
19027 105
19027 106-107
109
Bit, reinforced, for sheet metal up to approx. 12 mm and boreholes from approx. 34 up to approx. 150 mm Ø, made of HSS-E
111
19028 111
Special bit holder, for reinforced HSS-E bits end-no. 111. HSS-E Al10%Si 35-50
Cu 25-40
St
