CONSIGNMENT TEST REPORT - sirim

SIRIM QAS INTERNATIONAL SDN. BHD. (Company No: 410334-X) Civil & Construction Section No. 1, Persiaran Dato' Menteri, PO Box 7035, Section 2 40700 Shah Alam Selangor (Tel) 0355445852/5184 (Fax) 0355445855/5186

CONSIGNMENT TEST REPORT REPORT NO : 2012CBC5151

Page 1 of 5

This Consignment Test Report refers only to samples selected and tested by SIRIM QAS International Sdn. Bhd. This Consignment Test Report shall not be reproduced, except in full and shall not be used for advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. Applicant Address

Manufacturer Address

ANN JOO METAL SDN BHD WISMA ANN JOO,LOT 1939,BATU 81/2 PEJABAT POS KELANA JAYA,47301 PETALING JAYA, SELANGOR SUMITOMO METAL INDUSTRIES,LTD. KASHIMA STEEL WORKS 3 HIKARI KASHIMA IBARAKI 314-0014 JAPAN

Product

HOT ROLLED STEEL PLATE

Reference Standard/Method of Test

API 2W : 2006 STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) 28-August-2012 Date of Verification and Sampling WESTPORT Location of Sampling

Verification and Sampling Information

Application ID

SRC1012012009465

Job No Issued Date

J20121265151

Approved Signatory (MOHD AZLAN MAT ISA ) Technical Executive Civil & Construction Section Testing Services Department SIRIM QAS INTERNATIONAL SDN. BHD.

04-Sep-2012 11:44 am

CONSIGNMENT TEST REPORT REPORT NO : 2012CBC5151

Page 2 of 5

This Consignment Test Report refers only to samples selected and tested by SIRIM QAS International Sdn. Bhd. This Consignment Test Report shall not be reproduced, except in full and shall not be used for advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. DESCRIPTION OF SAMPLES AND TYPE OF TEST

sample ID

STD Reference

41029 API 2W

Product

Grade

HOT ROLLED STEEL PLATE

GR.50

Size

40mm (T) x 2438mm (W) x 9144mm (L)

Sample Qty.

2

Chemical

√

Tensile

√

Breaking Load

Bend

Flattening

Coating Mass

Coating Thickness

Hardness

Charpy

CONSIGNMENT TEST REPORT REPORT NO : 2012CBC5151

Page 3 of 5

This Consignment Test Report refers only to samples selected and tested by SIRIM QAS International Sdn. Bhd. This Consignment Test Report shall not be reproduced, except in full and shall not be used for advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. TEST RESULT : CHEMICAL COMPOSITION Sample ID

C

Si Fe

Mn Nb

P Ti

S V

Cu W

Ni Co

Cr Zn

Mo Pb

Al Zr

REMARK Mg

18663

0.075

0.174

1.284

0.010

0.002

Complied

18664

0.075

0.178

1.325

0.012

0.002

Complied

CONSIGNMENT TEST REPORT REPORT NO : 2012CBC5151

Page 4 of 5

This Consignment Test Report refers only to samples selected and tested by SIRIM QAS International Sdn. Bhd. This Consignment Test Report shall not be reproduced, except in full and shall not be used for advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. TEST RESULT : TENSILE / BREAKING LOAD

Sample ID

Diameter, d (mm)

Wall Thickness, a (mm)

Thickness, a (mm)

Width, b (mm)

18663

20.02

20.03

18664

20.02

19.98

Yield Load (kN)

Yield Strength, R0 (N/mm²)

Ultimate Load, Fm (kN)

Tensile Strength, Rm (N/mm²)

Elongation After Fracture, A (%)

401.00

171.80

428

198.30

495

35.5

Complied

400.00

173.10

433

199.60

499

36.0

Complied

Cross Sectional Area, S0 (mm²)

Remark

CONSIGNMENT TEST REPORT

1.0

CONDITIONS RELATING TO THE USE OF SIRIM QAS INTERNATIONAL TEST REPORT.

1.1

Test Report will be issued in respect of Testing Services conducted and shall relate only to the Sample actually tested. SIRIM QAS International makes no warranty whatsoever and the Applicant shall not represent in any manner that any duplication or mass production of the Product is same as the Sample actually tested or that SIRIM QAS International has tested any of the duplicated or mass produced Product.

1.2

The Test Report shall not be amended, changed, varied or modified in any manner whatsoever by the Applicant or otherwise.

1.3

If the Test Report is to be furnished to any third party or to the public, each such Test Report shall be furnished in full, legible and in its entirety.

1.4 The Test Report shall not be reproduced and shall not in any manner be used for any advertising purposes or whatsoever without written approval from the Managing Director of SIRIM QAS International of No. 1, Persiaran Dato’ Menteri, Building 8, Section 2, P.O. Box 7035, 40700 Shah Alam, Selangor Darul Ehsan. 1.5 Further or in the alternative, it is strictly forbidden unless with prior written approval from the Managing Director of SIRIM QAS International, to represent in any manner whatsoever that SIRIM and /or other SIRIM’s subsidiaries has endorsed, approved or validated the Product of the Applicant in any manner whatsoever. 1.6

The use of SIRIM QAS International, SIRIM or other SIRIM’s subsidiaries logo and/or words such as “SIRIM: Tested and proven” and similar representations are strictly forbidden in any manner whatsoever without the prior written approval from Managing Director of SIRIM QAS International.

1.7

In the event the Applicant is found in breach of this provision, SIRIM QAS International, SIRIM and /or other SIRIM’s subsidiaries without prejudice to any other right and remedies may take whatever action necessary including but not limited to: a) Informing and placing a notice in media; b) Obtaining an injunction from Court (cost on a solicitor-client basis to be borne by Applicant); c) Refusing to accept any further Product for Testing Services from Applicant or whatsoever related to the Applicant, whether subsidiary or otherwise; d) Instructing the Applicant to withdraw and recall the advertisement, statement or document in question and advertise a clarification and apology to SIRIM QAS International, SIRIM and/or other SIRIM’s subsidiaries twice in a national publication of SIRIM QAS International’s choice at the Applicant’s sole cost; and e) Informing or lodging a report pertaining the Applicant’s Test Report with the relevant authorities.

1.8 In the event of an investigation from any third party concerning the Applicant’s Test Report, SIRIM QAS International may disclose the same for purpose of such investigation. 1.9 If such approval is obtained from the Managing Director of SIRIM QAS International, the Applicant may only include the phrase. “A sample of this product has been tested by SIRIM QAS International... (Test Report No) … (dated) … (for what test) … (to which standard)” or such similar words which stress that only the sample was actually tested. 1.10 Certified true copies of the Test Report may be issued upon request by the Applicant upon payment of the relevant fee.