DESCRIPTION. RKC has been developing most advanced program controllers
for each period such as PS. -962, REX-P100, and REX-P9, and here is another ...
Access video via free mobile apps for iPhone/iPad an Android devices or web ... Free Client Software ... Windows Explore
For these models, append "M" to the model number, e.g. PTK25-D48-S5M-T.
Note 1. Key Features .... The PTK series DC/DC converters accept input voltages.
Desktop CPU and GPU solutions. ⢠Performance overclocking CPU and GPU VR solutions ...... TAC Fax: (310) 252-7903. Vis
studio, the DB1's rugged 16-gauge steel and aluminum “Uni- box” enclosure ...
There shall be two (2) 1/4” (6.3mm) 2-conductor phone jacks wired in parallel to ...
PHOTOTRANSISTOR. Part Number: WP3DP3BT. Features. ○ Mechanically and
spectrally matched to the infrared emitting. LED lamp. ○ Blue transparent lens.
IS456. IS456 s Features s Applications. *1 For 1 minute. *2 For 3 seconds at the
position shown in the follow- ing drawing. *3 Maximum allowable incident light ...
Mar 26, 2012 ... In a universal input flyback configuration, the. NCP1014 is limited to
approximately 8W. The current and open circuit voltage can be changed by.
3. Entropy of subfamily (EntropySub): Subfamily alignment was constructed manually from the superfamily ..... disorder in proteins from the three kingdoms of life.
Carnegie Mellon University to explore issues of abstractions for architecture and ... People involved in the acquisition of software specify ADLs for procurements and eval- ... Since the list of ADL descriptive attributes is quite long, it was import
See http://www.diodes.com/quality/lead_free.html for more information about
Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green".
current make it suitable for low to medium power applications, for example,
laptop computers, audio and video applications, and battery powered devices.
1. Introduction. 1.1 Background: system architecture for system development? .... ADLs support the evaluation of an application system before it is built. Figure 2: ...
seen on the edge, and fibromas mostly on the lingual tip. Conclusions: The high ..... highlighted in the Iranian population were: lichen planus, irritation fibroma,.
NXP Semiconductors. Product specification. Triacs. BT138 series. GENERAL
DESCRIPTION. QUICK REFERENCE DATA. Passivated triacs in a plastic ...
By further refining a TDK specialty, namely process technology for low ... is the
MLG0402Q and MLG0603P series of multilayer chip inductors with high Q values
.
Date per IEC/EN 61558-1-2 standard. *Based on an assumed ambient
temperature of. 25 °C, tests can be conducted at any temperature within the
range of ...
Codes for Fixed Resistors. STANDARD ..... STANDARD COLOR CODE.
TOLERANCE ... Marking Instructions for 0603 1% Chip Resistors (per EIA-J).
INTERSIL'S SOLUTIONS fOR MEDICAL EqUIPMENT. (PATIENT MONITORING
AND DIAGNOSTIC EqUIPMENT). Intersil Corporation is a global technology ...
Description. • For 1/4" x 1-1/4" (6.3mm x 32mm) fuses. • Bolt-in and snap-in
mounting available. • Tight cluster mounting. • All types of terminal configurations.
native connector to the TMDXEVM6446 or customer boards with a compact (CTI)
... TMDSADP1414-ISO – for connecting TI and 3rd party XDS510 and XDS560 ...
Description
TMDSADP1420 adapter – used for connecting TI and 3rd party XDS510 and XDS560-class emulators with a 14 pin native connector to the TMDXEVM6446 or customer boards with a compact (CTI) 20-pin header. The adapter improves signal integrity, translates voltages, and can optionally provide adaptive clocking. TMDSADP1414 – used for connecting TI and 3rd party XDS510 and XDS560 class 14-pin emulators to custom customer boards with 14-pin JTAG header. The TMDSADP1414 adapter improves signal integrity, translates voltages and can optionally provide adaptive clocking. It is compatible with TI and 3rd party XDS510 and XDS560class emulators with a 14 pin native connector connecting to a target board with a 14-pin standard JTAG header. TMDSADP1460 Emulation Adapter Board – designed to allow targets containing Texas Instruments' 60-pin Next Generation Emulation Interface to be used with traditional fielded 14-pin emulation hardware (e.g. XDS510 and XDS560). See 60-Pin Emulation Header Technical Reference SPRU655A for more information. TMDSADPEMU-20A adapter – a small printed circuit board adapter that has connections for both 14 pin and 20 pin (ARM) emulators on the top side. The target board side connector is to the standard 20 pin ARM configuration. TMDSADPEMU-20T adapter – a small printed circuit board adapter that has connections for both 14 pin and 20 pin (ARM) emulators on the top side. The target board side connector is to the TI 20 CTI configuration. TMDSADP1414-ISO – for connecting TI and 3rd party XDS510 and XDS560 class 14-pin emulators to custom customer boards with 14-pin JTAG header. The TMDSADP1414-ISO adapter is designed to minimize and protect connected devices (PC/Emulator/Target) from ground loop voltage, harsh environments and new, untested designs. The Isolation Adapter supports 3.3-5.0v targets and is available with TI 14-pin JTAG connections.
Features Features by Adapter
Description
Part #
RTCK Emulator Target Signal Header Header Boost
14 pin emulator to 14 pin TI TMDSADP1414 14 TI JTAG header 14 pin emulator to 20 pin TI TMDSADP1420 14 TI JTAG header 14 pin emulator to 60 pin High TMDSADP1460 14 TI density TI JTAG
Voltage Adative Translation Clocking Recommended for
14 TI
X
X
X
DM3x, DM2x, OMAP, DM644x target boards
20 TI (CTI)
X
X
X
DM6443/6446 target boards
60 TI
20 pin ARM/14 pin TI emulator to 20 pin ARM
TMDSADPEMU- 20 ARM 20A or 14 TI
20 ARM X
20 pin ARM/14
TMDSADPEMU- 20 ARM
20 TI
X
C64x/DM64x/64x+ target boards with 60 pin headers Third Party ARM tools and XDS510/XDS560 Emulators (DM644x target boards) Third Party ARM tools
pin TI emulator 20T to 20 pin TI (CTI) 14 pin emulator to 14 pin TI JTAG header with Isolation
•
or 14 TI
TMDSADP141414 TI ISO
(CTI)
14 TI
and XDS510/XDS560 Emulators (DM644x target boards) 3.3V/5V devices which require Isolation
Adapters with Voltage translation supported provides between +3.3V emulator interfaces and JTAG targets that require down to +1.8V interfaces.
•
Adaptive clocking for TI ARM based processors includes 8 selectable delay clocking options
•
Adapters do not require target board modifications
