010

Registration No. HKIAS 010 Page 1 of 4 Issue Date: 4 November 2016 Ref: HKIAS010-26

010

ETS-Testconsult Limited

東業德勤測試顧問有限公司 ADDRESS

地址

: 8/F., Block B, Veristrong Industrial Centre, 34-36 Au Pui Wan Street, Fo Tan, New Territories, Hong Kong

香港新界火炭坳背灣街 34-36 號豐盛工業中心 B 座 8 樓 AUTHORISED REPRESENTATIVE

: Mr Stephen SUNG Shu-chuen, Director 宋書全先生

委任代表 ENQUIRY

查詢

: Mr Tony WONG Yiu-keung 黃耀強先生 Tel Fax E-mail Website Address

TYPE OF INSPECTION BODY

電話 傳真 電郵

: 2695 8318 : 2695 3944 : [email protected]

網址

: http://www.ets-testconsult.com

: A : Provides “third party” inspection service to the public

檢驗機構類別

ACCREDITED INSPECTION FIELD

: Construction Products 建材產品

認可檢驗領域 SCOPE OF ACCREDITATION

: As shown on the following pages 詳見後頁

認可範圍

* * * * * * * *

Registration No. HKIAS 010 Page 2 of 4 Issue Date: 4 November 2016 Ref: HKIAS010-26

010

ETS-Testconsult Limited 東業德勤測試顧問有限公司 INSPECTION FIELD

ITEM, MATERIAL OR PRODUCT TESTED

SPECIFIC PROPERTY OR CHARACTERISTIC INSPECTED

SPECIFIC INSPECTION METHOD OR STANDARD

檢驗領域

檢驗項目、物料或產品

特定檢驗特性或特徵

特定檢驗方法或標準

CONSTRUCTION PRODUCTS

Welding Inspection

Inspection/approval of welding procedures BS EN ISO 15609-1: 2004 in conjunction with (MMAW, SAW, TIG, MIG, MAG, one of the following inspection methods: FCAW) BS 4870: Part 1: 1981 (AMD4322, AMD4730, AMD5161, AMD6293) BS EN 288: Part 3: 1992 (AMD9736, AMD10026 Corr. No. 1) BS EN ISO 15613: 2004 BS EN ISO 15614-1: 2004 (A1 : 2008) BS EN ISO 15614-1: 2004 (A2 : 2012) Inspection/approval of welder testing (MMAW, SAW, TIG, MIG, MAG, FCAW)

BS EN ISO 9606-1: 2013 (Incorporating Corrigenda September 2012 and February 2016) BS EN ISO 9606-4: 1999 BS 4871: Part 1: 1982 (AMD4732, AMD5697) BS 4872: Part 1: 1982 (AMD4640) BS EN 287: Part 1: 1992 (AMD9665, AMD9804 AMD10009 Corr. No.1) BS EN 287: Part 1: 2004 (AMD15598 Corr.No.1, AMD16295, AMD16831 Corr. No.2) BS EN 287: Part 1: 2011 ISO 9606-1: 1994 (A1 : 1998)

Inspection/approval of metal arc welding of steel for concrete reinforcement

BS 7123: 1989 (AMD7128)

Inspection/approval of welding of reinforcing steel for load-bearing welded joints

BS EN ISO 17660-1: 2006

Registration No. HKIAS 010 Page 3 of 4 Issue Date: 4 November 2016 Ref: HKIAS010-26

010

ETS-Testconsult Limited 東業德勤測試顧問有限公司 INSPECTION FIELD

ITEM, MATERIAL OR PRODUCT TESTED

SPECIFIC PROPERTY OR CHARACTERISTIC INSPECTED

SPECIFIC INSPECTION METHOD OR STANDARD

檢驗範圍

檢驗項目、物料或產品

特定檢驗特性或特徵

特定檢驗方法或標準

CONSTRUCTION PRODUCTS INSPECTION

Waterworks Products Steel pipes & fitting

Inspection of testing, lining, dimensional checks, material properties, coating marking and handling

WSD(PS): App. 22.02 WSD(PS): App. 23.02 BS 534: 1990 BS EN 10224: 2002

Ductile iron pipes & fitting

Inspection of testing, lining, dimensional checks, material properties, coating marking and handling

WSD(PS): App. 23.03 BS 4772: 1988

Manhole cover (with coating)

Inspection of testing, dimensional check, material properties, coating, marking and handling

WSD(PS): App. 23.14 BS EN 124: 1994 (excluding Cl. 5 and 10)

Surface box

Inspection of testing, dimensional check, material properties, coating, marking, and handling

WSD(PS) App. 23.13 BS 5834: Part 2: 1983 (excluding Cl. 4)

Cast iron pipes & fittings

Inspection of testing, lining, dimensional checks, material properties, coating, marking and handling

WSD(PS): App. 23.10 WSD(PS): App. 23.12 BS 143 & BS 1256: 2000

BS BS BS BS BS BS

EN 545: EN 545: EN 545: EN 545: EN 598: EN 598:

1995 2002 2006 2010 1995 2007 (A1 : 2009)

JIS B2301: 2004 BS EN 877: 1999 PE pipes & fittings

Inspection of testing, dimensional check material properties, coating, marking and handling

WSD(PS): App. 23.09 ISO 4427: 1996 ISO 14236: 2000 JIS K6762: 2004 WIS 4-24-01 WIS 4-32-14 WIS 4-32-15 WIS 4-52-01 BS EN 12201-2: 2003 & BS EN 12201-3: 2003 BS EN 12201-2: 2011 + A1: 2013 BS EN 12201-3: 2011 + A1: 2012

Registration No. HKIAS 010 Page 4 of 4 Issue Date: 4 November 2016 Ref: HKIAS010-26

010

ETS-Testconsult Limited 東業德勤測試顧問有限公司 INSPECTION FIELD

ITEM, MATERIAL OR PRODUCT TESTED

SPECIFIC PROPERTY OR CHARACTERISTIC INSPECTED

SPECIFIC INSPECTION METHOD OR STANDARD

檢驗範圍

檢驗項目、物料或產品

特定檢驗特性或特徵

特定檢驗方法或標準

CONSTRUCTION PRODUCTS INSPECTION

Waterworks Products (cont’d) Valves & fittings

Inspection of testing, dimensional check, material properties, coating, marking and handling

WSD(PS): App. 22.10 WSD(PS): App. 23.04 WSD(PS): App. 23.05 WSD(PS): App. 23.11 BS 5150: 1990 BS 5163: 1986 BS 6755-1: 1986 BS 5153: 1974 BS 5155: 1984 BS 5154: 1991 BS 5156: 1985 BS 5146-2: 1984 BS 5163-1: 2004 BS EN 1074-2: 2000 BS EN 593: 2004 BS EN 593: 2009 (A1 : 2011) BS EN 12334: 2001

Fire hydrants (Pedestal and swan neck)

Inspection of testing, dimensional check material properties, coating, marking and handling

WSD(PS): App. 23.06

Steel pipes/tubes and fittings

Inspection of testing, lining, dimensional checks, material properties, coating marking and handling

WSD(PS): App. 23.12

Copper alloy longscrew

Inspection of testing, dimensional check material properties, coating, marking and handling

WSD(PS): App. 22.06 BS 1387: 1985

Stainless steel pipes and fittings

Inspection of testing, dimensional check material properties, coating, marking and handling

WSD(PS): App. 22.11 BS EN 10312: 2002 BS 6362: 1990 ISO 7598: 1988 ISO 4144: 2003

BS5041-1: 1987

BS 1387: 1985 BS EN 10241: 2000