Check list HAND TOOLS.pdf - Google Drive

2 downloads 263 Views 248KB Size Report
O Hammer : 1,1 Condition of head (mushroomed). 1,2 Handale not smooth finish ... Page 2 of 2. Main menu. Displaying Chec
Company Name Inspection of Hand Tools Plant: Dept./Section: Tool Box No.________________Name of Person/ Contractor: Frequency :Monthly SN

Check Point/Deficiency

SN Tool Box No.

1.O 1,1 1,2 1,3

Inspection Date : Due Date :

Name of Person

Deficiency S. No.

Hammer :

Condition of head (mushroomed) Handale not smooth finish and securely fixed. Handale not properly seasoned & giving good grip. (If handle is replaced than original). 1,4 Handale is not firmly fixed with the head.

2.O Screw Driver : 2,1 Tip is not properly groung to fit the slot in the screw head. 2,2 Tip is not twisted. 2,3 Handale is not sound & smooth. 2,4 Screw driver is not being used for electrical Work with insulated handale.

3.O Punch/Chisel : 3,1 Head is mushroomed. (A slight taper ground round the periphery of the heads to reduce the tendency towards mushrooming). 3,2 Cutting edge is deformed. 3,3 Re sharpened chisel not suitably hardened & tempered.

Note: 1. Master list of hand tools shall be available for each toolbox issued to individual technician/operator. 2. Update the master list every six months. 3. Use of screw spanner is prohibited, hence must not be included in toolbox.

http://healthsafetyupdates.blogspot.in/

Corrective Action Taken

SN

Check Point/Deficiency

SN Tool Box No.

4.O 4,1 4,2 4,3

Name of Person

Deficiency S. No.

Corrective Action Taken

File & Rasp : Handale is not fixed securely. Teeth is worn or clogged. Stored not each one wrapped in a piece of cloth or paper.

5.O Hacksaw : 5,1 Blade is not securely tied with frame & in good condition.

5,2 Teeth of blade damaged. 6.O Wrench/Spanner : 6,1 Opening of jaw is deformed. 6,2 Sing of deterioration. 6,3 Physical damage. 6,4 Threads damaged. 7.O Any Other (please specify)

Note: 1. Master list of hand tools shall be available for each toolbox issued to individual technician/operator. 2. Update the master list every six months. 3. Use of screw spanner is prohibited, hence must not be included in toolbox.

Inspected By: Name ;_____________________ Designation: ______________

Signature:_________________

Date:_______________

Inspected By: Name ;_____________________ Designation: ______________

Signature:_________________

Date:_______________

http://healthsafetyupdates.blogspot.in/