Conference Time Table for Technical Program

International Corrosion Engineering Conference 2007

Organized by The Corrosion Science Society of Korea

Co-organized by Austrasian Corrosion Association (Australia) Chinese Society for Corrosion and Protection (China) Japan Society of Corrosion Engineering (Japan) National Center of Metals Research (Spain) Corrosion Engineering Association of the Republic of China (Taiwan) NACE International-Leaders in Corrosion Control Technology (U.S.A) Vietnam Corrosion and Metal Protection Association (Vietnam)

Sponsored by POSCO LS Nikko Copper Inc. HYUNDAI Heavy Industry Co., Ltd. SAMSUNG Heavy Industries DMSE Co., Ltd. KCC Corporation SK Corporation DOOSAN Heavy Industries and Construction Korea Gas Corporation CorRel Technology Co., Ltd. Korea Research Foundation Korea Science and Engineering Foundation The Korean Federation of Science and Technology Societies

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007

Welcome Greetings Welcome to Seoul and Korea It is my great pleasure to welcome you all to this fascinating and dynamic yet historic city of Seoul for the International Corrosion Engineering

Conference (ICEC).

ICEC2007 is organized by the Corrosion Science Society of Korea (CSSK) and supported kindly by many Korean industries

involving

the

corrosion

engineering

and

technology. The CSSK was established in 1971 with the mission to encourage corrosion research, technical support for industrial corrosion problems and exchange of information and ideas among the members. Currently, the CSSK has about 1200 individual members and 100 corporate members. The CSSK publishes an official journal of Corrosion Science and Technology. The CSSK has been growing with the diversified and sophisticated Korean industries into the world class. The ICEC is designed to provide a forum for the broad spectrum of corrosion engineering and corrosion prevention technology for future industry, with emphasis on the practical aspect of industrial corrosion control. We believe that this conference will provide an excellent forum to exchange high level information and ideas across different corrosion technologies and disciplines. More importantly, we hope that ICEC2007 becomes the best opportunity for each of you to make many friends in the world corrosion community. To help you feel the sense of the Korean culture better, we organized the conference tour with activities including participation in the Buddha´s birthday celebration and visiting traditional folk villages. We hope that the tour will be a wonderful experience to the participants and your stay in Seoul will be enjoyable and memorable. I hope you come and make friends in this attractive city of Seoul and contribute in the advancement of future corrosion science and technology.

Kyoo Young Kim Chairman of ICEC2007 Organizing Committee President of the Corrosion Science Society of Korea

2


Conference Committee

Honorary Chairman: Prof. Yong Soo Park (Yonsei University) Chairman:

Prof. Kyoo Young Kim (Pohang University of Science and Technology)

Secretariat: Prof. Woon Suk Hwang (Inha University)

International Advisory Committee: Prof. Ryuichiro Ebara (Hiroshima Institute of Technology, Japan) Prof. Gerald Frankel (Ohio State University, USA) Prof. Nguyen Dug Hung (VICORRA, Vietnam) Dr. Ki Chul Kang (Hansu Co., Ltd., Korea) Prof. Wei Ke (Institute of Metal Research, Chinese Academy of Sciences, China) Dr. Joung Soo Kim (KAERI, Korea) Prof. Hyuk Sang Kwon (KAIST, Korea) Prof. Wim J. van Ooij (University of Cincinnati, USA) Prof. Masahiro Seo (Hokkaido University, President of JSCE, Japan) Prof. Wen-Ta Tsai (National Cheng Kung University, Taiwan) Prof. J. H. W. de Wit (Delft University of Technology, Netherlands) Prof. Yu Zuo (Beijing University of Chemical Technology, China) Prof. A. K. Shukla, Central Electrochemical Research Institute (CSIR), India Prof. Gurmeet Singh, University of Delhi, India Prof. David Young (University of New South Wales, Australia) Prof. D. Eliezer (Ben-Gurion University, Israel) Dr. Iba Al-Adel (Aramco, Saudi Arabia)

Organizing Committee Prof. Bui Thi An (VICORRA, Vietnam) Dr. Kwang Ki Baek (HHI, Korea) Dr. Mridula D. Bharadwaj (General Motors India Pvt. Ltd., India)

3


Dr. Hyun Young Chang (KOPEC, Korea) Dr. Song Chun Choi (KGS, Korea) Prof. Kewei Gao (University of Science and Technology Beijing, China) Prof. En-Hou Han(Institute of Metal Research, Chinese Academy of Sciences, China) Prof. Her-Hsiung Huang (National Yang-Ming University, Taiwan) Prof. Joo Youl Huh (Korea University, Korea) Dr. Seong Sik Hwang (KAERI, Korea) Prof. Yoshinori Isomoto (Hiroshima University, Japan) Dr. Young Tai Kho (KOGAS, Korea) Dr. Bum Sung Kim (KCC, Korea) Prof. Hee San Kim (Hongik University, Korea) Dr. Jong Jip Kim (KRISS, Korea) Prof. Jung Gu Kim (Sungkyunkwan University, Korea) Dr. Young Keun Kim (KOGAS, Korea) Prof. Young Sik Kim (Andong National University, Korea) Prof. Jae Bong Lee (Kookmin University, Korea) Prof. Jae Ho Lee (Hongik University, Korea) Prof. Jong Kwon Lee (Soonchunhyang University, Korea) Dr. Seong Min Lee (KOGAS, Korea) Dr. Chi-Min Liao (China Steel Corporation, Taiwan) Dr. Hiroo Nagano (Materials and Environments Laboratory Inc., Japan) Prof. Keijirou Nakasa (Hiroshima Kokusai Gakuin University, Japan) Dr. N. Palanisamy (entral Electrochemical Research Institute (CSIR), India) Prof. Jin Hwan Park (Bukyong National University, Korea) Prof. Lijie Qiao (University of Science and Technology Beijing, China) Prof. Jyun-ichi Sakai (Waseda University, Japan) Prof. Kwang Seon Shin (Seoul National University, Korea) Dr. I. B. Singh (Regional Research Laboratory (CSIR), Bhopal, India) Prof. Ha Won Song (Yonsei University, Korea) Prof. Yongsug Tak (Inha University, Korea) Dr. Nguyen Nhi Tru (VICORRA, Vietnam) Prof. Tooru Tsuru (Tokyo Institute of Technology, Japan) Prof. Jianqiu Wang (Institute of Metal Research, Chinese Academy of Sciences, China) Dr. Deok Soo Won (KOGAS, Korea) Dr. Katsumi Yamamoto (JGC Corporation, Japan)

4


Contents Welcome Greetings

2

Conference Committee

3

List of Technical Sessions

6

Daily Time Table

7

Access to Venue

11

Registration & Information Desk

12

Exhibition

14

Social Programs

15

Maps of Floor Plan and Vicinity

17

Guidelines for Speakers

19

Technical Programs

20

5


List of Technical Sessions

Session Title

ABB.

Coating Industry

CI

Power Industry

PI

Oil and Gas Industry

IOG

Concrete and Construction Industry

ICC

Cathodic Protection Industry

ICP

Environmentally Induced Cracking

EIC

Research on Passivity and Localized Corrosion

RPL

Research on Atmospheric Corrosion

RAC

Research on Corrosion Inhibitor

RCI

Research on Corrosion and Protection of Light Metals

RLM

Research on Energy Storage and Electronics

REE

Research on High Temperature Corrosion

RHT

Research on Noble Method in Corrosion Research

RNM

Cost of Corrosion

S

6


DAILY TIME TABLE Day 1

May 20, 2007

Time

Sunday

Hankang

Geumkang A

Geumkang B

Dongkang B

(1st F.)

(2nd F.)

(2nd F.)

(3rd F.)

17:00-19:00

Registration

18:00-19:30

Welcome Party (Gayageum Hall B, 2nd F., Main Bldg.)

Day 2

May 21, 2007

Time

Monday

Hankang

Geumkang A

Geumkang B

Dongkang B

(1st F.)

(2nd F.)

(2nd F.)

(3rd F.)

8:40-09:40

Registration

09:40-10:10

Opening Ceremony (Hankang, 1st F.)

10:10-10:55

Plenary lecture I (Hankang, 1st F.)

10:55-11:40

Plenary lecture II (Hankang, 1st F.)

11:40-1:20

Lunch

1:20

ICP-K-1

1:40

CI-K-1

ICP-O-1

RCI-K-1

RPL-K-1

2:10

CI-O-1

ICP-O-2

RCI-O-1

RPL-O-1

2:30

CI-O-2

ICP-O-3

RCI-O-2

RPL-O-2

2:50

CI-O-3

ICP-O-4

RCI-O-3

RPL-O-3

3:10

CI-O-4

ICP-O-5

RCI-O-5

RPL-O-4

3:30

CI-O-5

ICP-O-6

3:50-4:10

RPL-O-5 Break

4:10

CI-K-2

ICC-K-1

EIC-K-1

RPL-O-6

4:40

CI-O-6

ICC-O-1

EIC-O-1

RPL-O-7

5:00

CI-O-7

ICC-O-2

EIC-O-2

RPL-O-8

5:20

CI-O-8

ICC-O-3

EIC-O-3

RPL-O-9

5:40

CI-O-9

ICC-O-4

7

RPL-O-10

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 Day 3

May 22, 2007

Time

Tuesday

Hankang

Geumkang A

Geumkang B

Dongkang B

(1st F.)

(2nd F.)

(2nd F.)

(3rd F.)

8:30-9:15

Plenary lecture III (Hankang, 1st F.)

9:15-10:00

Plenary lecture IV (Hankang, 1st F.)

10:00-10:20

Break CI-O-10

10:20

PI-K-1

CI-O-11

10:50

PI-O-1

CI-O-12

11:10

PI-O-2

CI-O-13

11:30

PI-O-3

CI-O-14

11:50 12:10-1:50

PI-O-4

ICC-O-5

EIC-O-4

ICC-O-6

EIC-O-5

ICC-O-7

EIC-O-6

ICC-O-8

EIC-O-7

ICC-O-9

Lunch and Poster Session I (1st and 2nd F. Aisle)

1:50

CI-K-3

2:20

Cl-O-15

2:40

Cl-O-16 CI-O-17

3:00 3:20

CI-O-19

3:40

CI-O-20

4:00

Break

4:20

CI-K-4

4:40

CI-O-21

PI-K-2 PI-K-3 PI-O-5 PI-O-6 PI-O-7 PI-O-8 Break

RAC-K-1

RPL-K-2

RAC-O-1

RPL-O-11

RAC-O-2

RPL-O-12

RAC-O-3

RPL-O-13

RAC-O-4

RPL-O-14

RAC-O-5

RPL-O-15

RAC-O-6

Break

Break

RNM-K-1

REE-K-1

IOG-K-1 IOG-O-1

5:10

CI-O-22

RNM-O-1

REE-O-1

IOG-O-2

5:30

CI-O-23

RNM-O-2

REE-O-2

IOG-O-3

5:50

CI-O-24

RNM-O-3

REE-O-3

IOG-O-4

6:10

POSTER SESSION I May 22(TUES.)

12:00 - 1:50

z CI-P-1

∼

CI-P-23

z PI-P-1

∼

PI-P-6

z IOG-P-1 ∼

IOG-P-9

z ICC-P-1

∼

ICC-P-4

z ICP-P-1

∼

ICP-P-12

z EIC-P-1

∼

EIC-P-8

1st and 2nd F. Aisle

8

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 Day 4

May 23, 2007

Time

Wednesday

Hankang

Geumkang A

Geumkang B

Dongkang B

(1st F.)

(2nd F.)

(2nd F.)

(3rd F.)

8:30-9:15

Plenary lecture V (Hankang, 1st F.)

9:15-10:00

Plenary lecture VI (Hankang, 1st F.)

10:00-10:20

Break

10:20

CI-O-25

RNM-O-4

10:40

CI-O-26

RNM-O-5

11:00

CI-O-27

RNM-O-6

CI-O-28

RNM-O-7

11:20 11:50-02:00

IOG-O-5

REE-K-2

IOG-O-6

REE-O-4

IOG-O-7

REE-O-5

IOG-O-8

REE-O-6

Lunch and Poster Session II(1st and 2nd F. Aisle)

2:00

RLM-K-1

RHT-K-1

RAC-K-2

IOG-O-9

2:30

RLM-O-1

RHT-O-1

RAC-O-7

IOG-O-10

2:50

RLM-O-2

RHT-O-2

RAC-O-8

IOG-O-11

3:10

RLM-O-3

RHT-O-3

RAC-O-9

IOG-O-12

RAC-O-10

Break

3:30-3:50

Break RLM-K-2

3:50 4:20

RLM-O-4

RAC-O-11

RHT-K-2

Break

RHT-O-4

4:40

RLM-O-5

RHT-O-5

5:00

RLM-O-6

RHT-O-6

5:20

RLM-O-7

RHT-O-7

5:40

RLM-O-8

S-K-1

IOG-O-13 IOG-O-14 IOG-O-15

S-K-2 S-K-3

6:00

S-K-4

6:20-6:30

Break

6:30

Banquet (Gayageum Hall)

POSTER SESSION II May 23(WED.)

11:50 - 1:40

z RPL-P-1

∼ RPL-P-23

z RAC-P-1

∼ RAC-P-3

z RCI-P-1

∼ RCI-P-6

z RLM-P-1

∼ RLM-P-3

z REE-P-1

∼ REE-P-16

z RHT-P-1

∼ RHT-P-5


z RNM-P-1 ∼ RNM-P-8

9


Day 5

May 24, 2007

Time

8:30-17:30

Thursday

Hankang

Geumkang A

Geumkang B

Dongkang B

(1st F.)

(2nd F.)

(2nd F.)

(3rd F.)

Conference Tour

10


*

Access to TEMF Hotel from Incheon Int. Airport The conference venue will be Seoul Education & Culture Center(TEMF Hotel), which is located in the Yangjaedong Civic Woods, 15 kilometers south of the city center of Seoul and 65 kilometers east of Incheon International Airport. z Address: 202 Yangjae 2-dong, Seocho-gu, Seoul, Korea z Tel: +82-2-571-8100 z http://www.temf.co.kr/eng/ For more information on the way to access TEMF Hotel from Incheon international airport, please refer to the following websites: http://www.temf.co.kr/eng/map_01.asp http://www.airport.or.kr/airport/traffic/bus/busList.iia?flag=E

Map of TEMF Hotel In order to get an assistance from any Korean, please show the following note: "I want to go to TEMF hotel in Yangjaedong" “

.”

11


Registration & Information Desk Registration on May 20-23 and all scientific programs will be carried out in the Annex building in TEMF Hotel. Welcome party on May 20 and banquet on May 23 will be held at Gayageum Hall on the 2nd floor of the main building in TEMF Hotel.

May 20 Registration will be carried out on the 1st floor of the Annex building in TEMF Hotel from 5:00 pm to 7:00 pm. The welcome party will be held at Gayageum Hall B on the 2nd floor of the main building in TEMF Hotel from 6:00 pm to 7:30 pm. There is no activity in Gayageum Hall B on May 20.

May 21-22 Registration will be carried out on the 1st floor of the Annex building in TEMF Hotel from 8:40 am to 6:00 pm. All scientific programs will be carried out in the Annex building in TEMF Hotel.

May 23 Registration will be carried out on the 1st floor of the Annex building in TEMF Hotel from 8:30 am to 6:00 pm. All scientific programs will be carried out in the Annex building in TEMF Hotel. Banquet will be held at Gayageum Hall on the 2nd floor of the main building in TEMF Hotel from 6:30 pm.

Lunch Lunch will be provided on May 21-23 at the following five different restaurants, located in the vicinity of the TEMF Hotel. The restaurants are closely located near the rear gate. Please check three luncheon vouchers when

you get ICEC 2007 materials from registration

desk. The details in lunch menu and the maps of the restaurants are described as follows: 1. Japanese Restaurant ("동해바다로"): Yangjaedong 204-1 (Tel : 575-1857~8) - Cod chowder, pollack chowder, corvina chowder, rice - Mild chowder with Rice

12

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 2. Korean Restaurant ("오작교"): Yangjaedong 204번지(Tel : 577-9553, 576-9553) - Steamed spicy beef rice - Spicy octopus cooked in casserole 3. Korean Restaurant ("인바위"): (Tel : 579-6554, 3461-1009) - Spicy octopus cooked in casserole - Korean style wine bacon (three layer pork marinated in wine) - Beef and vegetable stew - Thick beef stew, Beef rib stew - Bulgogi (Korean style beef) - Mackerel pike and kimchi soup - Steamed pork rib - Cold Noodle 4. Korean Restaurant ("맛깔촌"): Yangjaedong 203-13(Tel : 572-4976) - Sea food and noodles cooked in casserole - Lunch special Korean style hotpot 5. Japanese Restaurant ("정수사"): Yangjaedong 203-8(Tel : 573-7559, 573-7406) - Cod egg soup, 회덮밥 The restaurants are closely located near the rear gate.

Front Gate We’re Here

1,2 4 3

HOTEL

5

Rear Gate

Beverage Beverages such as coffee, soda and mineral water are available in the lobby of each floor and exhibition hall (Internet cafe) in the Annex building from May 21 to May 23.

13


Exhibition z Venue : Dongkang Hall, 3rd Floor z Date & Time : May 21, 12:00PM ~ May 23, 3:00PM z Raffle Tickets : After visiting the booths, visitors can get a stamped ticket to be eligible to win the prize z Purpose of Raffles : To promote the companies present at the booth presentation, and to attract more visitors z Draw to be made on May 23 at 13:40 at the Dongkang Hall z Prizes to be won - 1st Prize (1 person) : Laptop - 2nd Prize(1 person) : Digital Camera - 3rd Prize(5 persons) : MP3 Player

List of Exhibition Booth

No

Company

1

B&B Korea Co., Ltd.

2

Taejung Industry

3

Hansu Ltd.

4

Korea Gas Corporation

5

CorRel Technology Co., Ltd.

6

Samgong Co., Ltd.

7

WonA Tech

8

Youngin

9

Carl Zeiss Korea

10

Bruker AXS Korea Co., Ltd.

11

Total Solution Science

12

M-C Corporation

13

ABNEXO Co., Ltd.

14

Telstar hommel

15

Ilshin Autoclave

14


Social Programs Banquet Banquet on May 23 will be held at Gayageum Hall on the 2nd floor of the main building in TEMF Hotel. There is "Korean Traditional Culture Concert" program in the middle of banquet;

Purpose of Korean Traditional Culture Concert The organization committee of the ICEC wishes to extend great apperception to the participants of ICEC 2007 Seoul. The participants are cordially invited to The Korea Traditional Culture Concert, which will be held on Wednesday during the banquet. Come and discover the traditional Korean music, dance, and culture. Among the performers, Mr. Eunkwan Lee, the Certified National Asset of human culture, and his students will perform various folksongs and dances to surprise the audience and leave an impression.

Tour Programs Three tour programs are available during the conference: z Tour Program for Spouse/Accompanying Persons on May 21-23 z Conference Tour on May 24 z Daily Tour Program on May 21-23

Tour Program for Spouse/Accompanying Persons Accompanying persons can join a full day city tour (Line F1 mentioned below) free of charge. ᆞPlease inform the date to join this program to the registration crew at least one day earlier.

Conference Tour on May 24, 2007 The 24th of May in 2007 corresponds to the Buddha's Birthday (the 8th of April in lunar calendar), which is observed as a national holiday in Korea. Conference tour for all conference participants will be arranged first to visit Yongjusa Temple, 40 kilometers south of Seoul, which was originally built in 9th century. Then, we will move to the Korean Folk village where many features of the Korean culture have been collected and preserved for succeeding generations to see and learn about. It would be a wonderful opportunity to experience a Korean culture and Korean Buddhism culture.

Time

Conference Tour Schedule

8:30 -17:00

TEMF Hotel →Yongjusa Temple →Lunch →Korean Folk Village →TEMF Hotel

ᆞPlease inform your participation to the registration crew before May 22, 2007.

15


Daily Tour Program In order that conference participants may enjoy historic landmarks and cultural areas in Seoul, city

tours

at

your

own

expense

can

be

arranged

by

Cosmo.jin

tour

agency

(http://www.cosmojin.com). The travel agency will pick up and drop the participants at the conference venue (Seoul Education & Culture Center). All tours include English-speaking guide, transportation, and admission fee. Full day tours also include lunch. ᆞPlease make a reservation at the registration desk at least one before your planned tour.

Half Day Tours Time

Conference Tour Schedule Line M1

Morning Tour

(08:30-12:30) Line M2 (09:00-12:30) Line A1

Afternoon Tour

(13:00-17:30) Line A2 (13:00-17:30)

Price

Pass by the Presidential Blue House → Gyeongbok Palace (Deoksoo Palace on Tuesday) → The National

\28,000

Folk Museum → Jogye Temple Namsan Hanok Village (Namdaemun Market on Tuesday) → Seoul Tower → Myeongdong Changdeok Palace (The Secret Garden) → Insadong Art Galleries → Namdaemun Markek Korean Folk Village

\35,000 \30,000 \47,000

Full Day Tours Time

Conference Tour Schedule

Price

Pass by the Presidential Blue House → Gyeongbok Palace (Deoksoo Palace

Line F1

on Tuesday) → The National Folk Museum → Jogye Temple → Lunch →

(09:00-17:30) Changdeok Palace & secret Garden (Jongmyo on Monday) → Insadong Art

\66,000

Galleries → Namdaemun Market

Line F2

Pass by the Presidential Blue House → Gyeongbok Palace → The National

(09:00-17:30) Folk Museum → Jogye Temple → Lunch → Korean Folk Village Line F3

Imjin Gak → ID check at Unification Bridge → The 3rd Tunnel →

(08:00-14:30) Dorasan Observatory → Dora Station? Ginseng Center → Lunch → Itaewon

16

\80,000 \55,000


Maps on Conference

Main Bldg. (Gayageum Hall) Annex (Presentation) Rear Gate

Front Gate

Outdoor Functions of TEMF Hotel

G a ya geu m B (2 nd F .)

W elco m e P arty

G a ya g e u m H a ll (2 n d F .)

B an q u et

17


P o s t e r

Hankang (1st F.)

Entrance

M ain entrance

Plenary Lecture Oral Presentation (1st F.) Plenary lecture and and Oral/Poster Presentation(1st F.) Geumkang Hall (2nd F.) P o s t e r

D

A

C

B

Oral/PosterPresentation(2nd Presentation (2nd F.) Oral/Poster F.) (A,(A, B: B: OralOral Presentation, C: Speaker's Ready Room, D: Head Office) Presentation and C: Speaker’s ready room) Dongkang Hall (3rd F.)

C

B

A

Exhibition (3rd F.)

Exhibition (3rd F.) ( A: Exhibition, B: Oral Presentation, C: Committee Meeting Room) (A: Exhibition and B: Speaker’s ready room) Oral Presentation)

18


Guidelines for Speakers Oral presentation Presentation time is arranged as follows: Presentation

Presentation time(including discussion)

Plenary

45 minutes

Keynote

30minutes

Regular

20minutes

In order to ensure that the program run smoothly, all speakers are to requested to bring your own power point file compatible to Windows XP on a CD or on a memory stick (no floppy disk or zip disk) to a crew in the speaker's ready room on the 2nd floor in the Annex building no later than 1 hour before each session starts. If you want to use your own PC, you have to check up the compatability of your PC with the projector used in this conference. in the speaker's ready room (Dongkang Hall C on 3rd F.). The PCs are available in the speaker's ready room on the 2nd floor in the Annex building.

Poster presentation The poster sessions are scheduled at the Aisle of 1st and 2nd floor in the Annex building on tuesday to wednesday, May 22 to 23. Each poster is requested to be displayed during the assigned day and the presenter should attend and take questions from participants during the sessions. Each poster should be placed before the lunch break of the assigned day and be removed after 6:00 pm by each presenter. After 6:00 pm of each day, all posters are removed by ICEC2007 crews, if posters remain on the boards. Poster panels (90cm wide × 120cm height) are available. The presentation number will be posted at the top of each panel. Please use a correct panel on number. No materials is not provided for presentations and post. Each presenter will provide the materials such as type(s), sticker(s) and pin(s) for post.

Information for Session Chairs The chairpersons of each session are expected to arrive at each session room 10minutes before the session begins and to check the attendance of speakers in the session.

19


TECHNICAL PROGRAMS

Hangkang (Monday, 21 May 2007)

09:40 - 10:10 Opening ceremony

Plenary Lecture I & II May 21(MON.)

10:10 - 11:40

1st F. Hankang

Chair: Prof. Y.-S. Park

P-I

Recent Trends of Coated Steel Development

10:10

O. Kwon

P-II

Corrosion

protection

from

inhibitors

and

inhibitor combinations

delivered

by

synthetic ion exchange compound pigments in coatings

10:55

R. Buchheit

11:40 - 1:40 Lunch

Coating Industry I Co-chairs: May 21(MON.)

Jung-Gu Kim and William J. van Ooij

01:40 - 03:50,

1st F. Hankang

CI-K-1

Corrosion Protection of Automotive Steel by Novel Water-Borne Prime Systems

01:40

William J. van Ooij and Paula Puomi

Cl-O-1

Fuel Corrosion Properties of Fuel Tank Steel Sheets

02:10

J. Cho, S.-K. Noh and J.-R. Lee

Cl-O-2

Corrosion-Resistance and Powdering Properties of Hot-Dip Zinc Coating for Newly Developed Micro-Alloy Free Exposed Automotive Steel Sheets

02:30

J.-H. Ahn, D.-G. Kang and M.-H. Hong

CI-O-3

Influence of Selective Oxidation Phenomena in CGLs on Galvanized Coating Defects Formation

02:50

Y.F. Gong, S. Birosca, H.S. Kim and B.C.De Cooman

Cl-O-4

Evaluation of Plasma Spray Hydroxy Apatite Coatings on Metallic Materials

03:10

S. Take, K. Mitsui, M. Kasahara, R. Sawai, S. Izawa, M. Nakayama and Y. Itoi

Cl-O-5

Synthesis of Polyaniline and its Electrochemical Performance as an Organic Coating and a Pigment for Epoxy Paints

03:30

V.D. Duong, L.T. Hao, N.M. Hoang, L.V. Hai, N.N. Tru and N.T.P. Thoa

20


03:50 - 04:10 Break

Coating Industry II Co-chairs: May 21(MON.)

Sang Hoon Kim and Jianhua Liu

04:10 - 06:00

1st F. Hankang

CI-K-2

Technical Trends in Automotive Coatings

04:10

S.H. Kim, H.K. Moon and F. Doessel

Cl-O-6

A Study on the Synthesis of Conductive Polymer Films on Steel by the Anodic Oxidation of Some Heteroorganic Compounds and the Protection of Metal Against Corrosion of Conductive Polymer Films

04:40

L. T. Hai

CI-O-7

The research and application of protective coating for PCCP

05:00

Z. Lin, L. Zhang, C. Xu, Y. Fan and Q. Zhang

CI-O-8

Study on Optimization and Anti-Corrosion Resistance of Coating System for Outer Cover

05:20

M. Yu, J. Liu, H. Jianping, S. Li and X. Guangxing

CI-O-9

Preparation and Characterization of Nano-TiO2(Core)-PMMA(Shell) Latex Polymer

05:40

P. Zhang, Z. H. Wang and X. Yu

Geumkang A (Monday, 21 May 2007)

Cathodic Protection Industry Co-chairs: May 21(MON.) ICP-K-1

Ki-Joon Kim and Yon-Kyun Song

01:20 - 03:50

2nd F. Geumkang A

Electrochemical Behaviour and Corrosion Protection of Galvanized Steel Sheet treated in Ce based Solution

01:20

Y.-K. Song and F. Mansfeld

ICP-O-1

Corrosion Control of a Steel Bridge Submerged in Brackish Water - A Case Study

01:50

T.T.B. Hoang and T.T.B. Nguyen

ICP-O-2

A New Type of Sacrifice Anode for Seawater Copper Pipelines

02:10

X. Li, H. Wang and P. Yao

ICP-O-3

Application of CorrStop Grid for 100,000m3 Capacity External Floating Roof Tank Bottom ICCP

02:30

L. Jinmei and Q. Liangshan

21

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 ICP-O-4

Advanced

Cathodic

Protection

Modeling

Associated

with

Coating

Degradation

Conditions

02:50

G.-J. Im, K.-J. Kim and M.-H. Lee

ICP-O-5 Cathodic Protection of the Dense Buried Pipes Web

03:10

S.-y. Li, X. Sun and H.-m. Ren

ICP-O-6

AC-induced corrosion effects on cathodically protected pipelines

03:30

W. Machczynski

03:50 - 04:10 Break

Concrete & Construction Industry I Co-chairs: May 21(MON.) ICC-K-1

Ha Won Song and Hiroshi Yokota

04:10 - 06:00

2nd F. Geumkang A

Corrosion of Reinforcement and Its Effect on Structural Performance in Marine Concrete Structures

04:10

H. Yokota, E. Kato and M. Iwanami

ICC-O-1

Etchant for dissolving thin layer of Ag-Cu-Au alloy

04:40

K. Utaka, , T. Komatsu and H. Nagano

ICC-O-2

Evaluation of Surface Scaling and Resistance to Frost deterioration for Coastal Structure Concrete

05:00

G.-Y. Kim, M.H. Kim, B.S. Cho, G.M. Roh

ICC-O-3

Study on the Carbonation Properties of Fly Ash Concrete using a Vacuum Instrument

05:20

S.-H. Jung, S.-W. You and S.-T. Chae

ICC-O-4

Corrosion of steel in blended concretes containing OPC, PFA, GGBS and SF

05:40

K.C. Lee, C.H. Lee and H.W. Song

Geumkang B (Monday, 21 May 2007)

Corrosion Inhibitors Co-chairs: May 21(MON.) RCI-K-1

Sung-Min Lee and Gurmeet Singh

01:40 - 03:50

2nd F. Geumkang B

Inhibiting Effects of Butyl Triphenyl Phosphonium Bromide on Corrosion of Mild Steel in 1N Sulfuric Acid Solution and Its Adsorption Characteristics

01:40

K. Bhrara and G. Singh

22

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RCI-O-1

Inhibition of Mild Steel Corrosion by Environmentally Friendly Organic Molecules

02:10

E.E. Oguzie, Y. Li and F.H. Wang

RCI-O-2

Study on corrosion inhibition performance of PASP and its derivates

02:30

Y.Q. Li, L.P. Huang, Z.Y. Chen and H.Q. Tang

RCI-O-3

Investigation of the Inhibitive Effect of a New Triazole Derivative on Corrosion of Mild Steel in 1 M HCl solutions

02:50

W. Li, Q. He, C. Pei and B. Hou and Q. Zhang

RCI-O-5

Binary Compound Formation upon Copper Dissolution: STM and SXPS Results

03:10

P. Broekmann, N.T.M. Hai, S. Huemann, R. Hunger, W. Jaegermann and K. Wandelt

03:30 - 04:10 Break

Environmentally Induced Corrosion I Co-chairs: May 21(MON.) EIC-K-1

Jong Kwon Lee and Lijie Qiao

04:10 - 05:40,

2nd F. Geumkang B

The Formation Process of Flakes and their Effects on Mechanical Properties of Wheel Steel

04:10

X. Ren, Y. Su, W. Chu and L. Qiao

EIC-O-1

Effect of Microstructure on Hydrogen Induced Cracking Resistance of High Strength Low Alloy Steels

04:40

S.U. Koh, H.G. J and K.Y. Kim

EIC-O-2

Study on HIC and SSC of the Electric Resistance Welded linepipe Steel

05:00

W.K. Kim, S.U. Koh, K.Y. Kim and B.Y. Yang

EIC-O-3

Effect of Cold Work on the HIC Resistance of API X65 Grade linepipe Steel

05:20

G.-T. Park, S.-U. Koh, H.-G. Jung and K.-Y. Kim

Dongkang B (Monday, 21 May 2007)

Passivity and Localized Corrosion I Co-chairs: May 21(MON.) RPL-K-1

R.A. Mohammed and J.H.W. de Wit

01:40 - 03:50

1st F. Dongkang B

Adhesion of Model Molecules to Metallic Surfaces, The Implications for Corrosion Protection

01:40

J.H.W. de Wit, J. van den Brand, F.M. de Wit and J.M.C. Mol

RPL-O-1

Biofouling Microbial Induced Corrosion - A Case Study

02:10

R.A. Mohammed, A.M. Helal and N. Sabah

23

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RPL-O-2

Respondence between Electrochemicl Fluctuations and Phenomenon for Localized Corrosion of Less-Noble Metals

02:30

Y. Itoi, S. Take and T. Tsuru

RPL-O-3

Study on Mechanism of Porous Oxygen Electrode to Accelerate Pitting Corrosion of Bronze Ware

02:50

L. Feng, F. Hu, S. Feng, Z. Jiang, W. Zhang, Y. Qi, J. Wang and X. Sun

RPL-O-4

Determination of the pH of iso-selectivity of the interfacial diffusion layer of Fe

03:10

H.-Y. Ha and H.S. Kwon

RPL-O-5

The effect of solution treatment on intergranular corrosion resistance of a new type ultra-low-carbon stainless steel

03:30

J. Wang, N. Ni, Q. Yan and L. Liu

03:50 - 04:20 Break

Passivity and Localized Corrosion II Chair: May 21(MON.)

Jae Bong Lee

04:20 - 06:00,

1st F. Dongkang B

RPL-O-6

Prediction of stress corrosion susceptibility of stainless steels by repassivation kinetics

04:20

H.S. Kwon

RPL-O-7

Study on the Effects of Copper on the Passivity of Fe-20Cr-xCu Stainless Steel Alloys

04:40

I.-ul-H. Toor and H.S. Kwon

RPL-O-8

Photoelectrochemical study on the growth of the passive film on Fe-20Cr-15Ni

05:00

H. Jang and H.S. Kwon

RPL-O-9

Intervention of cladospporium on corrosion behaviors of A3 steel in iron bacteria corrosion environment

05:20

S. Li, Y. Wang, J. Liu and X. Liang

RPL-O-10 Effect of Pseudomonas on Corrosion Behaviors of Steel A3

05:40

S. Li, M. Liu, J. Liu, A. Atrens and G. Song

24


Hangkang (Tuesday, 22 May 2007) Plenary Lecture III & IV May 22(TUES.) P-III

08:30 - 10:00

1st F. Hangkang

Chair: Prof. H.-S. Kwon

Prospect on IMO’s Performance Standards for Protective Coatings (PSPC) Regulation for Ship’s Water Ballast Tanks

08:30

K.K. Baek,

P-IV

Interaction of Mechanics and Electrochemistry for Magnesium alloys

09:15

En-Hou Han

10:00 - 10:20 Break

Coating Industry III Co-chairs: May 22(TUES.) Cl-O-10

Study

Jin Hwan Park and Jong Myung Park

10:20 - 12:00 on

Engineering

1st F. Hankang Application

Electroless

Plating

for

Equipment

Parts

Remanufacturing

10:20

Q.-y. Zhang, F.-f. Liu, Y.-b. Houng and G.-w. Song

CI-O-11

A study on the fluoropolymer composite coatings for protecting the corrosion of fossil-fuel power plants

10:40

M.S. Kang, B.S. Lee, H.Y. Chang, T.E. Jin and I.S. So

CI-O-12

Evaluation of Nonchromated Thin Organic Coatings for Corrosion Inhibition of Electrogalvanized Steel

11:00

J.M. Park and K.Y. Kim

CI-O-13

Curing Mechanism of Epoxy Coating Curing at Ambient Temperature

11:20

Q.-q. Guo, D.-g. Li, H.-m. Huang and H.-q. Chen

CI-O-14

Application of the lubricant effect of oxidation and abrasive wear products of HVOF Co-alloy T800 coating for high speed spindles

11:40

T.Y. Cho, J.H. Yoon, K.S. Kim, K.O. Song, S.J. Youn, N.K. Back, H.G. Chun and S. Y. Hwang

12:00 - 12:10 Break 12:10 - 01:50 Lunch and Poster Session I (1st and 2st F. Aisle)

25


Coating Industry IV Co-chairs: May 22(TUES.) CI-K-3

YingHuai Zhang and Gordon .P. Bierwagen

01:50 - 04:00

1st F. Hankang

Characterizing the ac-dc-ac degradation of Aircraft and Vehicle Organic Coatings using Embedded Electrodes

01:50

G.P. Bierwagen, K.N. Allahar, Q.Su and V. Johnston-Gelling

CI-O-15

A Study on the Factors for Improvement of Chemical and Physical Properties in Fluoric Rubber Coating for Use of the Extremely Acidic Environments

02:20

H.Y. Chang, T.E. Jin, I.S. So, B.S. Lee and M.S. Kang

Cl-O-16

The Study of Corrosion Behavior of Active Screen Plasma Nitrided Stainless Steels

02:40

L.H. Chiu, C.A. Chang, S.H. Yeh, F.S. Chen and H. Chang

CI-O-17

Finite Element Simulation and Theoretical Analysis of Induction Fusing of Coating

03:00

X. Hao, J. Liu and S. Li

CI-O-19

Understanding the degradative effects of different climatological conditions on architectural coatings: Progress report on KICMs site comparison study of Seosan (Korea) outdoor exposure testing facility.

03:20

Y. Choi, S. Pyo, J. Seo, I. Yang, S. Kim and S. Kim

Cl-O-20

Research on Processes and Adhesion of Electroless Plating Ni-W-P Coating

03:40

G.-z. Ba, Y.-b. Huang, Z.-f. Meng and D.-g. Liu

04:00 - 04:20 Break

Coating Industry V Co-chairs: May 22(TUES.)

L.H. Chiu and Takakuwa Hideki

04:20 - 06:10

1st F. Hankang

CI-K-4

Updated The Pretreatment Technologies for Automotive in Japan

04:20

T. Hideki

Cl-O-21

Aluminum Coating Prepared by Cold Spray

04:50

G. Huang and H. Wang

Cl-O-22

Research on the Solution and Properties of Ni-P/n-Al2O3 Electroless Composite Plating

05:10

Y.-b. Huang, F.-f. Liu, Q.-y. Zhang, G.-z. BA and Z.-j. Liang

Cl-O-23

Performance Evaluation of Degraded Organic Coatings by Conventional Visual Inspection, EIS and AFM with Correlation of Results

05:30

D.-H. Lee, K.N. Allahar, H.-S. Jung, D. Battocchi and G.P. Bierwagen

CI-O-24

The next generation highly durable finishes beyond polysiloxane

05:50

G. de Vries

26


Geumkang A (Tuesday, 22 May 2007)

Power Industry I Co-chairs: May 22(TUES.)

Joung Soo Kim and David J. Young

10:20 - 12:10

2nd F. Geumkang A

PI-K-1

High Temperature Corrosion in Carbon-Rich Gases

10:20

D.J. Young

PI-O-1

Case Study: Failure analysis of Al-Brass on Condenser Tube at 50 MW of Steam Power Plant

10:50

S.K. Bekti and Harpendi

PI-O-2

Development of Sulphuric Acid Dew-Point Corrosion-Resistant Steel for the Fossil Power Industry

11:10

S.-H. Lee, K.-J. Jeong, J.-G. Kim and H.-Y. Chang

PI-O-3

Effect of PWVA/Sb2O3 complex inhibitor on the corrosion behavior of carbon steel in 55% LiBr solution

11:30

C. Liang, X. Hu and N. Huang

PI-O-4

Consideration of Methods Evaluating The Growing Process of Stress Corrosion Cracking of The Sensitized 18-8 Austenitic Stainless Steel in High Temperature Water Based on Electric Circuit Theory: The Effects of Stress Factors

11:50

Y. Tsukaue

12:10 - 01:50 Lunch and Poster Session I (1st and 2nd F. Aisle)

Power Industry II Co-chairs: May 22(TUES.) PI-K-2

Seong Sik Hwang and T. Yonezawa

01:50 - 4:10

2nd F. Geumkang A

Irradiation Assisted Stress Corrosion Cracking of Austenitic Stainless Steels in Water Reactors

01:50

T. Yonezawa

PI-K-3

Evaluation and Development of Corrosion Resistant Materials for Smokestacks

02:20

R. Ebara

PI-O-5

Contribution of Water Chemistry in Initiation of Some Accelerated Corrosion Processes in Candu-PHWR Primary System

02:50

I. Pirvan, M. Radulescu and M. Fulger

PI-O-6

Corrosion and Sliding Properties of the Nickel -Based alloys for the Valve Seats Application

03:10

T. Honda

27

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 PI-O-7

Material integrity assessment for a Ni electrodeposit inside a tube

03:30

D.-J. Kim, M.J. Kim, J.S. Kim and H.P. Kim

PI-O-8

Corrosive Wear of Alloy 690 Tubes in Alkaline Water

03:50

S.M. Hong, C. Jang and I.S. Kim

04:10 - 04:40 Break

Noble Method in Corrosion Research I Co-chairs: May 22(TUES.)

Jae Ho Lee and I. B. Singh

04:40 - 06:10

2nd F. Geumkang A

RNM-K-1 Smart Processing in the Development of SOL-GEL Ceramic Coatings

04:40

I.B. Singh

RNM-O-1 Hardness and Corrosion Resistance of Surface Composites Fabricated with Fe-based Metamorphic Powders by High-energy Electron Beam Irradiation

05:10

D. Nam, K. Lee, S. Lee and K.Y. Kim

RNM-O-2 Improving the hemocompatibility and biocompatibility of a titanium dental implant surface using electrochemical anodization treatment

05:30

Z-H. Chen and H.-H. Huang

RNM-O-3 Electrochemical Random Signal Analysis during Localized Corrosion of Anodized 1100 Aluminum Alloy in Chloride Environments

05:50

M. Sakairi, Y. Shimoyama and D. Nagasawa

Geumkang B (Tuesday, 22 May 2007) Concrete & Construction Industry II Co-chairs:

Nguyen Viet Hue and V. Saraswathy

May 22(TUES.) 10:20 - 12:00 ICC-O-5

2nd F. Geumkang B

Resistance of Cementitious Binders to Chloride Induced Corrosion of Embedded Steel by Electrochemical and Microstructural Studies

10:20

H.W. Song, K.Y. Ann and T.S. Kim

ICC-O-6

Prediction of chloride profile considering binding of chlorides in cement matrix

10:40

C.H. Lee, K.Y. Ann and H.W. Song

ICC-O-7

Resistance of cementitious binders against a fall in the pH at corrosion initiation

11:00

M.S. Jung, H.W. Song, and K.Y. Ann

ICC-O-8

Fabricating the Repairing Mortar for Reinforced Concrete damaged in Coastal Areas

11:20

N.T.B. Thuy, N.N. Yen. L.X. Canh, N.T.T. Minh, D.T.T. Quynh and N.V. Hue

28

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 ICC-O-9

Tolerable limit of chloride in blended cements

11:40

V. Saraswathy, H.W. Song, S. Muralidharan and Thangavel

12:00 - 12:10 Break 12:10 - 01:50 Lunch and Poster Session I (1st and 2nd F. Aisle)

Atmospheric Corrosion I Co-chairs: May 22(TUES.) RAC-K-1

Jeong Real Park and Toroo Tsuru

01:50 - 04:20,

2nd F. Geumkang B

Electrochemical Approaches on Atmospheric Corrosion of Weathering Steel and Stainless Steel

01:50

T. Tsuru

RAC-O-1

Effects of rural, marine and urban atmospheric in Viet Nam on corrosion of CT3 steel.

02:20

L.Q. Tuan, V.Q. Hoa, N.X. Thuong, T.V. Chung and N.X. Thuong

RAC-O-2

Corrosion Resistance of Weathered Steels

02:40

J.-R. Park and K.Y. Kim

RAC-O-3

Investigation of Effectiveness of Dehumidification system for Corrosion Control inside Upper Box Girder in Youngjong Grand Bridge

03:00

S.Y. Li, S. Jung, K.W. Park, Y.T. Kho, K.-H. Ha, J.-Y. Yoon and K.-S. Chung

RAC-O-4

Study on atmospheric corrosion for two different marine environments in India

03:20

J. K. Saha

RAC-O-5

Protective Ability Index of Rust Layer Formed on Weathering Steel Bridge

03:40

S. Hara, T. Kamimura, H. Miyuki, M. Yamashita and H. Uchida

RAC-O-6

Investigating of corrosion resistance to marine atmosphere of weathering steel with high yield strength

04:00

S. Wang, K. Gao, S. Yang, X. He

04:20 - 04:40 Break

Energy storage & Electronics I Co-chairs: May 22(TUES.) REE-K-1

Chan-Jin Park and Kewei Gao

04:40 - 06:10

2nd F. Geumkang B

Domain switching and crack propagation of BaTiO3 single crystal in different environments

04:40

K. Gao

29

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 REE-O-1

Effect of Tantalum and Lanthanum Addition on Electrochemical Property of Austenitic Stainless Steel in a Simulated PEMFC Environment

05:10

K.-M. Kim

REE-O-2

Effect of applied voltage bias on electrochemical migration in eutectic SnPb solder alloy

05:30

S.-B. Lee, J.-Y. Jung, Y.-R. Yoo, Y.-B. Park, Y.-S. Kim and Y.-C. Joo

REE-O-3

Development of New Structural Materials for Hydrogen Economy

05:50

D. Eliezer

Dongkang B (Tuesday, 22 May 2007)

Environmentally Induced Corrosion II Co-chairs: May 22(TUES.) EIC-O-4

Seong Sik Hwang and M. Matsumura

10:20 - 11:40

1st F. Dongkang B

Proposed Guidelines for Selection of Methods for Erosion-corrosion testing in Flowing Liquids

10:20

M. Matsumura

EIC-O-5

SCC Mechanism of Ni Base Alloys in Lead Contaminated Water

10:40

S.S. Hwang, and D.J. Kim, Y.S. Lim, J.S. Kim, J.Y. Park and H.P. Kim

EIC-O-6

Study on Effect of Corrosion Environments on the Fracture Property of 2124 Aluminum Alloys

11:00

X. Hao, J. Liu, G. Xu and S. Li

EIC-O-7

Failure Analysis of Leaky Copper Tube

11:20

W. Zheng, W. Shi, J. Wang and X. Yang

11:40 - 12:10 Break 12:10 - 01:50 Lunch and Poster Session I (1st and 2nd F. Aisle)

Passivity and Localized Corrosion III Co-chairs: May 22(TUES.)

Hyuk Sang Kwon and D.D.N. Singh

01:50 - 04:00

1st F. Dongkang B

RPL-K-2

Orientation Dependent Directed Etching of Aluminum

01:50

D. N. Lee and J.H. Seo

RPL-O-11 New High Mn-N Duplex Stainless Steel for Transport Structural Component

02:20

I.-ul-H. Toor, J.H. Park, W.H. Ryu and H.S. Kwon

30

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RPL-O-12 Development and Application of High-Cr Ferritic Stainless Steels as Building Exterior Materials

02:40

Y.H. Kim, Y.D. Lee and Y.H. Lee

RPL-O-13 Desalinization of corrosion products formed on salinized iron artifacts

03:00

J.-H. Lee and J.-B. Lee

RPL-O-14 Unusual passive behaviour of galvanized coating exposed in simulated concrete pore solution

03:20

D.D.N. Singh and R. Ghosh

RPL-O-15 Pitting-Corrosion of SUS304 Stainless Steel in 3.5Mass% NaCl Aqueous Solution under Application of Ultrasonic Wave

03:40

R. Wang and K. Nakasa

04:00 - 04:20 Break

Oil & Gas Industry I Co-chairs: May 22(TUES.)

B.S. Hammad and Seon.Yeob Li

04:20 - 6:10

3rd F. Dongkang B

IOG-K-1

Integrity Survey on External Corrosion of Underground Pipelines in Korea

04:20

K.-W. Park, H.-J. Kim, S.Y. Li, J.-Y. Jeon and Y.T. Kho

IOG-O-1

Failure of Steam Superheater Tube of Reformer Heater

04:50

H.M. Shalaby, W.T. Riad, and M.T. Rajab

IOG-O-2

Case Study of Non-Metallic Repair Systems for Metallic Piping

05:10

B.S. Hammad

IOG-O-3

Testing Investigation of Protective Coatings for Downhole Oil Tube

05:30

L. Zhang, Q. Zhang, Y. Zhang, B. Xie and Y. Zhang

IOG-O-4

Sulfide Hydrogen and Metal of Gas Filed Equipment (IOG-O-9)

05:50

O. Radkevych, H. Chumalo, I. Dominyuk, R. Yurkevych

1st and 2nd F. Aisle (Tuesday, 22 May 2007)

May 22(TUES.) 12:10 - 02:10 CI-P-1


Enhancement Of Corrosion Fatigue Strength by Spraying Pressure and Coating Composition Of WC-Co Cermet Sprayed Coatings

R. Wang, R. Wang, M. Kido and Y. Satake

31

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 CI-P-2

Stability of Substituted 4-Bromobenzene and 4-Nitrobenzene Groups Electrochemically Grafted at Carbon Electrode Surface

A.A. Rostami and M. Khoshroo CI-P-3

Characteristics in Paintability of Advanced High Strength Steels

H.S. Park CI-P-4

Effect of Forming Voltages on The Electrochemical Behaviour of Microarc Oxidation Films on Aluminum Alloy

C.K. Lee, C.H. Lin, K.L. Chang and A.H. Tan CI-P-5

Corrosion Resistance of Ni-P Alloys Deposited in Presence of Some Organic Additives

O.V. Dolgikh and N.V. Sotskaya CI-P-6

Properties of Chromium Composite Plated with Nanosized Diamond Powder

V.H. Nguyen, S.C. Kwon, M. Kim and J.Y. Lee CI-P-7

The Protective Ni and Ni alloys Coatings and Their Catalytic Activity in the Hydrogen Evolution Reaction

Y.G. Kravtsova, N.V. Sotskaya, O.V. Dolgih and D.O. Phedyanin CI-P-8

Production of nanometer scale compositionally modulated

multilayers

coating

consisted of multiple alternative yellow and white MIR alloys layers on mild steel substrate using a dual bath technique

Z.A.A. Haryanti and S. Purwadaria CI-P-9

Corrosion of WC Coatings in Sulfuric Acid Base Solution

S.Y. Hwang CI-P-10

Effect of extender on the barrier property of organic coating

S.J. Lee, Y.H. Jo, G.D. Lee and J.H. Park CI-P-11

Study on the Corrosion Behavior of Austenitic Stainless Steel Used for Automobile Flex Tube

Y.H. Kim, G.T. Park and K.Y. Kim CI-P-12

Effect of Drawing Rate on the Localized Corrosion of Automotive Tube

B.J. Park, J.G. Kim and S.H. Ahn CI-P-13

The study of stainless steel nitrocarburizing at low plasma temperature with active screen

L.-H. Chiu, F.S. Chen, Y.-Y. Su and H. Chang CI-P-14

An Electrochemical Evaluation on the Corrosion of Weld Zone in Cold Arc Welding for the Cast Iron

K.M. Moon, H.R. Cho, J.G. Kim, M.H. Lee and K.J. Kim CI-P-15

Environmental Effects on Mechanical Properties of Glass Fiber Reinforced Polymer Composite

J. Hu, J. Liu, L. Zhao and S. Li CI-P-16

A

novel

preparation

method

of

stable

polyurethane paint

W. Wei, S. Li, J. Liu, Y. Wang and J. Hu

32

super-hydrophobic

coatings

based

on

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 CI-P-17

Corrosion behavior of Al based coatings by cold spray

H.-J. Kim CI-P-18

The study of stainless steel by low temperature plasma nitrocarburising with active screen

L.H. Chiu, F.S. Chen, Y.-Y. Su, H. Chang CI-P-19

Material properties of electrodeposited Ni composite formed in a nickel sulfamate bath containing α-Al2O3/ZrO2/TiO2/Y2O3

M.J. Kim, D.-J. Kim, J.S. Kim and H.P. Kim CI-P-20

Research and application of inorganic alcohol-soluble zinc rich coatings

B. Xie, L. Zhang, Y. Zhang and Y. Zhang CI-P-21

A Critical Study on Cracking of Protective Coatings for Water Ballast Tank of Ships

J.T. Yun, M.J. Lee, E.S. Kong and C.S. Lim CI-P-22

Preparing of an newly anti-corrosive paint with high resistance to chemicals

L. Lv, R. Zhai, D. Hao, X. Ding and S. Zhou CI-P-23

Evaluation of Underwater Curing Coating Material

H-S, Nah, K-J, Kwon, C-W. Lee, R. Baker

May 22(TUES.) 12:10 - 02:10 PI-P-1


Characterization of Water Vapor Oxidation of the Hear-Resistant Alloys under the Ultra Super Critical Steam Condition

K.O. Song, J.H. Yoon, B.G. Park, D.Y. Cho, K.W. Uhm, S.H. Lee and J.W. Lee PI-P-2

Identification of the Failure of VFD Heat Sink at Fossil Power Plant

J.-S. Jung, H.-S. Lee, M.-T. Kim and E.-H. Kim PI-P-3

Evaluation of sulfuric acid corrosion resting steels with different alloying elements in sulfuric acid environment

W.S. Ji, D.P. Le and J.G. Kim PI-P-4

Effective Deoxygenation of Water in Energy Systems

T.A. Kravchenko, M.Y. Chayka, N.V. Sotskaya, D.V. Konev and V.A. Krysanov PI-P-5

Structural instability of alloyed materials long-term exposed to operation conditions of WWER nuclear power plants

J. Bystriansky PI-P-6

Inhibition of lead induced stress corrosion cracking with CeB6 in Alloys 600 and 690

C.-W. Seock, I.-G. Park, C.-S. Lee, J.-S. Kim and H.-P. Kim

May 22(TUES.) 12:10 - 02:10 IOG-P-1


Pilot study on fractal feature for potential-time curves of buried pipeline in-situ

Y. Weng, X. Li, Y. Li and C. Han IOG-P-2

Spectral Analysis of CO2 Corrosion Product Scales on 13Cr Tubing Steel

G.F. Lin, X.Y. Xu, Z.Q. Bai and Y.R. Feng

33

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 IOG-P-3

High Strength Low Alloy Steel for Sour Service

H.G. Jung, S.H. Kim, B.Y. Yang and K. B. Kang IOG-P-4

Analysis of Electrochemical Noise and Impedance Spectroscopy for X70 Steel in Ku’erle Soil

J.Y. Huang, Y.B. Qiu, W.J. Wang and X.P. Guo IOG-P-6

Fracture Toughness Evaluation of Natural Gas Pipeline under the Cathodic Protection

C.-M. Kim, Y.-P. Kim and W.-S. Kim IOG-P-7

The Field Test of a Mitigation Method from DC subway System for Underground pipeline

J.-H. Bae, T.-H. Ha, Y.-C. Ha, H.-G. Lee and D.-K. Kim IOG-P-8

Anticorrosive monitoring and complex diagnostics of corrosion-technical condition of main oil pipelines in Russia

M. Kosterina, S. Artemeva, M. Komarov, I. Vjunitsky and V. Pritula IOG-P-9

Estimation of corrosion condition of underwater transitions of main oil pipelines

M. Kosterina, S. Artemeva, N. Pokrovskaja and I. Vjunitsky

May 22(TUES.) 12:10 - 02:10 ICC-P-1


Corrosion and Protection of Prestressing Steel under Stressed Condition

K. Kumar ICC-P-2

Corrosion Properties of Reinforced Concrete by Combined Deterioration Test

M.H. Kim, G.Y. Kim, B.S. Cho and Y.D. Kim ICC-P-3

Evaluation on Surface Scaling and Frost Resistance for Concrete Deteriorated due to Cyclic Freezing and Thawing with Inherent Chloride

G.Y. Kim, B.S. Cho, S.H. Lee and M.H. Kim ICC-P-4

Effects of the film thickness of cataphoretic coating on corrosion resistance for the automotive body

W.-S. Yang, J.-G. Kim and W.-S. Hwang

May 22(TUES.) 12:10 - 02:10 ICP-P-1


Replacements for Chromate Pigments in Anticorrosion Primers for Aluminum Alloys

Z. Yin, W.V. Ooij and P. Puomi ICP-P-2

Practical Experiences with Corrosion Protection of Water Intake Gates in Mekong River

T.H. Phong, N.N. Tru and L.Q. Han ICP-P-3

The Effect of Alloying Elements on the Electrochemical Behavior of Aluminum Anodes

M. Omidi, A.R. Etemadi and M. Nabi

34

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 ICP-P-4

Built-in and Retrofit Cathodic Protection Systems for large diameter Prestressed Concrete Cylinder Pipe (PCCP) using Zinc Sacrificial anodes, An innovation Design and Technical Evaluation

S.M. Elkoum ICP-P-5

Microstructures and key properties of mechanical-deposited zinc coatings

S. Wang, M. He, X. Zhao, R. Tan and Z. Peng ICP-P-6

Current Diminishment for Zn-mesh Cathodic Protection System in Concrete

K.-J. Kim, J.-A. Jung and T.-S. Jang ICP-P-7

Anticorrosive efficiency of coating and cathodic protection system in artificial seawater

Y.H. Jo, J.B. Ha, G.D. Lee and J.H. Park ICP-P-8

Anodic Behavior of Al-Zn-In Sacrificial Anodes at Different Concentration of Zn and In

M. Omidi, A. R. Etemadi and M. Nabi ICP-P-9

Investigation of Design Methodology for Impressed Current Cathodic Protection Optimum System

P. Yao and J. Wu ICP-P-10

The oxide anode used in storage tank cathodic protection system

W. Juntao, X. Likun and H. Yun ICP-P-11

BEM Analysis of ICCP System for an Ice Breaker Under Simulated Service Conditions

M.J. Lee, C.S. Lim and J.T. Yun ICP-P-12

Study on Epoxy Coating Which Could Be Applied On High Temperature (70℃) Steel Surface

W. Han, Z. Xu, X. Wang and A. Li

May 22(TUES.) 12:10 - 02:10 EIC-P-1


Compressor Blades Corrosion - Failure

V. Chal EIC-P-2

SCC Behavior of Austenitic Stainless Steels in Boiling Saturated Magnesium Chloride Solution: Effect of Test Temperature and Applied Stress

O.M. Alyousif and R. Nishimura EIC-P-3

Mechanism of Environmentally-Induced Stress Corrosion Cracking of Zr-Alloys

S.Y. Park, J.H. Kim, B.-K. Choi and Y.H. Jeong EIC-P-4

Electrochemical noise generated during the stress corrosion cracking of 40Cr steel

Y.-T. Zhao, M. Shao, L.-J. An and H.-M. Cao EIC-P-5

Investigation of alloying (Si, Cu and W) effects on the localized and stress corrosion of austenitic stainless steels through factorial analysis

C.-J. Park and D.-R. Kim

35

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 EIC-P-6

Corrosion fatigue behavior of fastening hole structure and virtual crack propagation tests

Y.-h. Zhang, G-Z. Lv, H. Wang, Z. Li and Y.-l. Cheng EIC-P-7

A Study on the Structure & Mechanical Stability of Hydrogenated Ti-Zr-Co Qusicrystalline/Amorphous Alloy

S. Jayalakshmi, K.B. Kim and E. Fleury EIC-P-8

Recent Corrosion Research Trends in Weld Joints

H.T. Kim and W.S. Hwang

36


Hankang (Wednesday, 23 May 2007)

Plenary Lecture V & VI May 23(WED.)

08:30 - 10:00

1st F. Hankang

Chair: Dr. Y.-T. Kho

P-V

The Importance of Corrosion Control and Protection Technology in the Refinery

08:30

B-M. Kim

P-VI

Environmentally Assisted Cracking of Alloys at Temperatures near and above the Critical Temperature of Water

09:15

Y. Watanabe

10:00 - 10:20 Break

Coating Industry VI Co-chairs: May 23(WED.)

Kwang-Ki Baek and Gerard de Vries

10:20 - 11:40

1st F. Hankang

Cl-O-25

Critical Design Issue on the Cathodic Protection Systems of Ships

10:20

H.I. Lee, C.-H. Lee, M.-K. Chung and K.-K. Baek

Cl-O-26

A Study on Variation of Epoxy Coating Protection Performance by Retaining Pre-construction Primer

10:40

C.-H. Lee, C.-S. Shin, H.-I. Lee, M.-K. Chung and K.-K. Baek

Cl-O-27

Effects of Surface Modification with Amino Terminated Polydimethylsiloxane(ABP) on the Corrosion Protection of Epoxy Coating

11:00

M.Y. Shon and H.S. Kwon

CI-O-28

Study on New Candidate Coating Material to Challenge Rudder Cavitation Damage

11:20

K.-K. Baek, C.-H. Lee, H.-I. Lee, M.-S. Han and M.-K. Chung

11:40 - 11:50 Break 11:50 - 02:00 Lunch and Poster Session II (1st and 2nd F. Aisle)

Corrosion and Protection of Light Metals I Co-chairs: May 23(WED.)

Kwang Sun Shin and Dan Eliezer

02:00 - 03:30

1st F. Hankang

RLM-K-1 Corrosion Mechanisms of New Wrought Mg-Zn Based Alloys Alloying with Si, Ca and Ag.

01:40

G.B. H.amu, D. Eliezer and K.S. Shin

37

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RLM-O-1 Effect of electrolyte on corrosion resistance of ceramic coating of Mg alloy fabricated by plasma electrolyte oxidation

02:10

D.Y. Hwang, J.Y. Cho, D.-Y. Park and D.H. Shin

RLM-O-2 Raman microscopy of cerium interactions with corroding aluminum alloy 2024-T3

02:30

S. Li, H. Zhang, J. Liu and Z. Sun

RLM-O-3 Corrosion behavior of AZ91D magnesium alloy in sodium chloride

02:50

S. Li, M. Liu, J. Liu, A. Atrens and G. Song

03:30 - 03:50 Break

Corrosion and Protection of Light Metals II Co-chairs: May 23(WED.)

Her-Hsiung Huang and Osami Seri

03:50 - 06:00

1st F. Hankang

RLM-K-2 Improving of corrosion resistance of aluminum alloys by removing intermetallic compounds

03:50

O. Seri

RLM-O-4 Nano-Meter

Measurement

of

Oxide

Film

Thickness

of

Al-Mg

Alloy

by

Electrochemical Impedance spectroscopy (EIS)

04:20

K. Habib

RLM-O-5 Useful Corrosion - Potential of Magnesium Alloys as Implants

04:40

A.A. Kaya, R.A. Kaya and O. Duygulu

RLM-O-6 Effect

of

Annealing

on

the

Pitting

Corrosion

Resistance

of

Anodized

Aluminum-Magnesium Alloy processed by Equal Channel Angular Pressing

05:00

I.-J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima and Z. Horita

RLM-O-7 Influence of substrate microstructure on anodic oxide layer formed on Al alloy 2024-T3

05:20

J. Liu, L. Ming, S. Zhongzhi and S. Li

RLM-O-8 Effects of nitrogen ions implantation treatment on metal ions release and bacterial adhesion of Ti-containing dental orthodontic wires

05:40

K.-L. Tung, Y.-Y. Lin and H.-H. Huang

38


Geumkang A (Wednesday, 23 May 2007) Noble Method in Corrosion Research II Co-chairs:

Jae Bong Lee and Ryuichiro Ebara

May 23(WED.) 10:20 - 11:40

2nd F. Geumkang B

RNM-O-4 Application of Electrochemical Noise Method with 3 electrodes to monitor Corrosion and Environmental Cracking in Chemical Plants

10:20

T. Ohtsu, M. Miyazawa and R. Ebara

RNM-O-5 A Novel Heated Electrode Technique for Studying Corrosion Properties of Alloy 22

10:40

Y. Ashida and L. G. Mcmillion

RNM-O-6 Corrosion Behavior of Pure Iron by a Micro-Droplet of Sulfuric Acid Aqueous Solution

11:00

R. Wang and M. Kido

RNM-O-7 Fabrication and Electrochemical Properties of Anodic Alumina Membrane

11:20

M. Yu, J. Liu and S. Li

11:40 - 11:50 Break 11:50 - 02:00 Lunch and Poster Session II (1st and 2nd F. Aisle)

High Temperature Corrosion I Co-chairs: May 23(WED.)

Joo Youl Huh and J. Favergeon

02:00 - 03:30

2nd F. Geumkang A

RHT-K-1

High Temperature Behavior of Oxidized Iron in Dry And Wet Atmospheres

02:00

J. Favergeon, K. Dawi and G. Moulin

RHT-O-1

EBSD Microstructural Characterization of Oxide Scale on Low Carbon Steel

02:30

S. Birosca and B.C. De Cooman

RHT-O-2

Environmental Conditions in Reheating Furnace for High Quality Advanced High Strength Steels for Automobiles

02:50

I.-R. Sohn and K.-G. Chin

RHT-O-3

Effect of Compression Stress on the High-temperature Oxidation Behavior of Pure Fe

03:10

C. Zhou, H. Ma and L. Wang

03:30 - 03:50 Break

39


High Temperature Corrosion II Co-chairs: May 23(WED.)

Chungen Zhou and Z. Żurek

03:30 - 05:40

2nd F. Geumkang A

RHT-K-2

Development and oxidation resistance of B-doped silicate coating on Ni-base alloy

03:50

X. Li, and C. Zhou

RHT-O-4

High

Temperature

Corrosion

Of

Spheroidal

Graphite

Cast

Iron

in

Complex

Atmosphere

04:20

J. Favergeon, Dawi and G. Moulin

RHT-O-5

Pb SCC of Ni-base alloys in PbO-added pure water solutions

04:40

J.S. Kim, Y.-S. Yi, O.C. Kwon and H.P. Kim

RHT-O-6

Microstructural Investigations of Al2O3 Scale Formed on FeCrAl Steel During High Temperature Oxidation in SO2

05:00

M. Homa, Z. Żurek, B. Morgiel, P. Zięba and J. Wojewoda

RHT-O-7

The Effect of Aluminum on Isothermal Oxidation Resistance of Austenitic Heat Resistant Steels

05:20

M.O. Aminian, J. Hedjazi and Y. Kharazi

Geumkang B (Wednesday, 23 May 2007)

Energy storage & Electronics II Co-chairs: May 23(WED.)

Haitao Ma and Jun'ichi Sakai

10:20 - 11:50

2nd F. Geumkang B

REE-K-2

Corrosion of Silver by Outgassing from Rubber

10:20

J. Sakai, M. Omoda and 　Y. Ishikawa

REE-O-4

Effects of Mn substitution and AB5 type alloy embedment on the electrochemical characteristics of Ti-Cr-Mn-V BCC type alloys

10:50

J.-H. Kim

REE-O-5

Stainless steel bipolar plates for PEMFC application - Surface modification using conductive layer

11:10

Y.-H. Yun

REE-O-6

Leaching of Elements Solder Alloys

11:30

Z. Fan, J. Zhao，H. Ma and L. Wang

11:50 - 02:00 Lunch and Poster Session II (1st and 2nd F. Aisle)

40


Atmospheric Corrosion II Co-chairs: May 23(WED.) RAC-K-2

Y. S. Song and Nguyen Nhi Tru

02:00 - 04:10,

2nd F. Geumkang B

Development of Copper Corrosion Products and Relation between Surface Appearance and Corrosion Rate

01:40

N.N. Tru

RAC-O-7

The Protective Ability Index(PAI) and Its Application to a Weathering Steel Bridge with Surface Treatment.

02:30

M. Yamashita

RAC-O-8

In Situ Observation of Initial Rusting Process of Steel Containing AI Using Synchrotron Radiation X-Rays

02:50

J. Morimoto, M. Yamashita, H. Uchida, T. Doi, T. Kamimura, H. Miyuki, H. Konishi and J. Mizuki

RAC-O-9

Effect of Aluminum and Silicon on Atmospheric Corrosion of Low-alloying Steel under Containing NaHSO3 Wet/dry Environments

03:10

X. Chen, J. Dong, E. Han and W. Ke

RAC-O-10 Atmospheric Corrosion Process for Weathering Steel

03:30

H. Nagano and M. Yamashita

RAC-O-11 The results of study on atmospheric corrosion in Vietnam since 1995 to 2005

03:50

L.T.H. Lien, P.T. San and H.L. Hong

04:10 - 04:30 Break

Corrosion Cost Co-chairs:

Jong Jip Kim and Toshiaki Kodama

May 23(WED.) 04:30 - 06:20

2nd F. Geumkang B

S-K-1

Corrosion Cost Survey in Japan - Focusing on Transportation Industry -

04:30

T. Kodama

S-K-2

Survey of Corrosion Cost in China and Preventive Strategies

05:00

W. Ke

S-K-3

Corrosion Challenges to the Industry, the Economic, Safety and Environmental Aspects

05:30

I. Al-Adel

S-K-1

Survey of corrosion cost in Korea-progress report

06:00

J.-J. Kim

41


Dongkang B (Wednesday, 23 May 2007)

Oil & Gas Industry II Co-chairs May 23(WED.) IOG-O-5

Byong Mu Kim and Mokhtar Che Ismail

10:20 - 11:40

3rd F. Dongkang B

Construction of Intelligent Cathodic Protection System using Remote Monitoring and Control Technologies for Atmospheric Corrosion Control in Oil & Gas Industry

10:20

J. Choi, S. Jung, S.-S. Choi, S.Y. Li and K.W. Park

IOG-O-6

Corrosion Study of Residual Fuel Oil Tank Roofs

10:40

G.T. Kim and B.M. Kim

IOG-O-7

The Application of AEC Non-phosphorous Program in Cooling Water System of Petrochemical Industry

11:00

L. Dagang, H. Mike, H. Gaorong

IOG-O-8

Film Formation in CO2 Corrosion with the Presence of Acetic Acid: An Initial Study

11:20

M.C. Ismail, S. Turgoose and M.A. Mohd

11:40 - 11:50 Break 11:50 - 02:00 Lunch and Poster Session II (1st and 2nd F. Aisle) 02:00 - 02:10 Break

Oil and Gas Industry III Co-chairs: May 23(WED.) IOG-O-9

Song-Chun Choi and C. Sequera

02:10 - 03:30

3rd F. Dongkang B

Corrosion Assessment by using Risk-based Inspection Method for Petrochemical Plant - Practical Experience

02:10

S.-C. Choi, C.-H. Lee and K.-H. Song

IOG-O-10 CO2 Corrosion Mechanism of Carbon Steel in the Presence of Acetate and Acetic acid

02:30

D. Liu, C.Y. Fu, Z.Y. Chen and X.P. Guo

IOG-O-11 Validation of Some Protection Guidelines for Neighboring Pipelines against Fault Currents from Power Transmission Tower

02:50

S.-M. Lee, H.-S. Song and Y.G. Kim

IOG-O-12 Corrosion behavior of a sour grade oilwell pipe steel in CO2 and CO2/H2S environments

03:10

C. Sequera, E. Vinces, S. Hernández, E. Rodríguez and S. Camero

42


03:30 - 04:00 Break

Oil and Gas Industry IV Chair: May 23(WED.)

Young Geun Kim

04:00 - 05:00

3rd F. Dongkang B

IOG-O-13 A Study on the Application of ECDA for the Buried PE Coated Gas Pipeline

04:00

D.S. Won, Y.G. Kim and S.Y. Li

IOG-O-14 Study on the Sulfide corrosion to the internal surface of transportation pipeline

04:20

Z. Yiling, Q. Ping and K. Dehong

IOG-O-15 A Study on Drag Reduction Agency for Gas Pipeline

04:40

Y. Fan, Q. Zhang, Z. Lin, L. Zhang, C. Xu and W. Han


May 23(WED.) 11:50 - 01:40 RPL-P-1


Study of Corrosion Performance of Alloy in the Production of Acetate

W.-B. Liu, J. Wang, Q.-H. Qiu and W.-Z. Li RPL-P-2

Use of RRDE Combined with Photo-potential Spectroscopy for Investigation of Thin Oxide Films

S. Grushevskaya RPL-P-3

Stochastic Characteristics of Carbon Steels Pit Initiation N. A. Muratova

RPL-P-4

Microelectrochemical Polarization of 2205 Duplex Stainless Steels

J.-J. Kim and J.-B. Lee RPL-P-5

Electrochemical

Noise

Analysis

on the

General

Corrosion of

Mild steel

in

Hydrochloric Acid Solution

D.-S. Seo RPL-P-7

Effects of Corrosion Product Scales on the Local Corrosion Behavior of Carbon Steel in Neutral Solution

Y.-l. Zhu and X. Guo RPL-P-8

Properties of Passive Film formed on Super Stainless Steels in Simulated Bio-Solution and Acidic Chloride Solution

S.G. Jang, Y.R. Yoo, H.H. Cho, H.S. Nam, K.Y. Lee, H.Y. Son and Y.S. Kim

43

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RPL-P-9

Effects of Air Void at the Steel-concrete Interface on the Corrosion Initiation of Reinforced Steel in Concrete

J. Nam RPL-P-10 Effect of the heat treatment parameters on the phase transformation and corrosion resistance of Fe-14Cr-3Mo martensitic stainless steel

J. Park and Y. Park RPL-P-11 Application of the Polarised Potential-pH Diagrams to Investigate the Role of Sulfate and Dissolved Oxygen in the 3550-ppm NaCl Solution on the Corrosion Behaviour of AISI 316L Stainless Steel

S. Chandra-ambhorn RPL-P-12 Corrosion stability of electrodes based on nanoscale Zr, Co and Ti oxides

G.Ya. Kolbasov, V.S. Vorobetz, N.D. Ivanova and O.A. Stadnik RPL-P-13 Electrochemical Behavior of TiNi Shape Memory Alloy in Sulfate Solutions

S.-C. Na, W.-S. Yang, J.-J. Lee, S.-S. Jang, H.-R. Yoo and W.-S. Hwang RPL-P-14

Localized Corrosion of TiNi Shape Memory Alloy in Sodium Chloride Solutions

W.-S. Yang, S.-C. Na, J.-J. Lee, S.-S. Jang, H.-R. Yoo and W.-S. Hwang RPL-P-15 Effects on Mn on the Resistance to localized Corrosion and Passivity Behavior of Fe-18Cr alloys

K. Park and and H. Kwon RPL-P-16 Corrosion Behavior of NiTi alloy in simulated SALIVA

X. J. Lil, N. X. Li, J. Q. Wang, E. H. Han and W. Ke RPL-P-17 Corrosion

behavior

of

Ti-based

quasicrystalline

alloys

in

simulated

Hank’s

physiological solution

J. Jayaraj, O. J. Kwon, B. N. R. Jung and E. Fleury RPL-P-18 Corrosion Behavior of Cell-Cultured Ti-Nb-Ta Alloy for Dental Materials

H. C. Choe, Y-M. Ko, H. H. Cho and G. H. Park, RPL-P-19 Electrochemical Characteristics of Ti-Zr alloys

M.-Y. Oh, H.-C. Choe, Y.-M. Ko, S.-J. Park and W.G. Kim RPL-P-20 Surface Characteristics of Anodized Ti-3wt%, 20wt%, and 30 wt% Nb Alloys

Y.-M. Ko, H.-C. Choe, S.-H. Jang and S.-W. Kim RPL-P-21 Electrochemical Properties of Ti-Ta Binary Alloys for Biomaterial

S.W. Kim, H.C. Choe, Y.-M. KO and Y.H. Jung RPL-P-22 Corrosion of Stainless Steel in Oxidized Water

J. Lee and H. Lee RPL-P-23 The Crevice Corrosion between Cr5Mo and 321SS in Hot Potassium Carbonate Solution and Protection

H. Song and S. Tu

44

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 May 23(WED.) 11:50 - 01:40 RAC-P-1


Corrosion Behaviour of Some Alloys in Tropical Urban and Marine Atmospheres

D.V. Ngoan, B.B. Xuan and N.N. Tru RAC-P-2

Corrosion Behavior of Mild Rusted steel by Means of Wet/Dry Alternate Conditions

D. Jie RAC-P-3

Discussion on black tarnish phenomenon occurred in electro-galvanized sheets coated with thin chromate-free fingerprint-resistant film

L. Lu, X. Li, C. Dong, C. Du and J. Gao May 23(WED.) 11:50 - 01:40 RCI-P-1


Electrochemical Impedance Spectroscopy Study on The Effectiveness of Benzotriazole to Inhibit Type API 5L X65 Carbon Steel in CO2 Saturated Sodium Chloride Solutions

S. Purwadaria RCI-P-2

Corrosion Inhibition on Viologen Modified Copper Electrodes

K. Gentz, P. Broekmann and K. Wandelt RCI-P-3

Inhibition of Pumping Water Environment Corrosion on

Oilfields by Imidazolines

and Their Precursors

N.D. Ha, N.H. Doan and N.D. Hung RCI-P-4

Inhibition of copper pitting corrosion in alkaline chloride solution by benzotriazole

E. A. Skrypnikova, I. S. Bocharova and S. A. Kaluzhina RCI-P-5

A Study on Initial Stage Corrosion Behaviors of Typical Pipeline Steel in Typical Soil Environment

Z. Zhao RCI-P-6

EIS Study of the Corrosion Process and Inhibitor Effect of Sintered Zinc ? Aluminum Coatings on Steel in Quiescent Seawater

N. Li, L. XU and H. Wang

May 23(WED.) 11:50 - 1:40 RLM-P-1


Corrosion and Inhibition of AZ31 Magnesium Alloys in Corrosive Ethylene Glycol Solutions

J. Lei, L. Li, M. Chen, Y. Li and H. Liu RLM-P-2

Time-Dependent Corrosion Behavior of AZ31 and AZ61 Magnesium alloys in Simulated Seawater

L. Li, S. Yu, J. Lei, S. Zhang and F. Pan RLM-P-3

A Study on the Corrosion Properties of Mg alloys prepared for the Application of Medical Implant

H.K. Seok, Y.C. Kim, J.Y. Lee, S.Y. Cho, J.G. Kim, and S.J. Yang

45

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 May 23(WED.) 11:50 - 01:40, REE-P-1


Effects of organic additives on residual stress and surface roughness of electroplated copper for flexible PCB

J. Kim and H. Kim REE-P-2

Effects of La on Electrical Conductivity of ferritic Stainless Steels for SOFC Interconnects

J. Jun, D. Kim and J. Jun REE-P-3

Effect of Ag and Cu Additions on Electrochemical Migration Susceptibility of Pb-free Solders in Na2SO4 Solution

Y.R. Yoo, H.S. Nam, J.Y. Jung, S.B. Lee, Y.B. Park, Y.C. Joo and Y.S. Kim REE-P-4

Optimization of the Polypyrrole-coating Parameters for PEM Fuel Cell Bipolar Plates using the Taguchi Method

D.O. Northwood REE-P-5

Effect of corrosion characteristics of solder alloys on electrochemical migration lifetimes in NaCl and Na2SO4 solutions

J.-Y. Jung, E.-J. Jang, Y.-R. Yoo, S.-B. Lee, Y.-S. Kim, Y.-C. Joo and Y.-B. Park REE-P-6

Surface activation of BCC type Ti-Cr-V alloy by embedding with AB5 type alloy in Ni-MH battery

J.-Y. Park, C.-N. Park, C.-J. Park and J. Choi REE-P-7

Comparison of Plasma Etching Resistance Between Thermally Sprayed Al2O3 and Y2O3 Coatings

K.H. Baik, Y.-R. Lee and H.-K. Seok REE-P-8

The Corrosion Properties of Nitrogen-Implanted 316L Stainless steel in Simulated PEMFC environment

Y.C. Kim, M.W. Kim, S.J. Jung, S.H. Han, J.P. Ahn, H.K. Seok, K.B. Kim and E. Fleury REE-P-9

Thermally Stabilized Posous Nickel of Palladium

based alloy Membrane for High

Temperature Hydrogen Separation

S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim and H.-G. Kim REE-P-10

Defect-induced loading of Pt nanoparticles on carbon nanotubes

S.J. Kim REE-P-11 Efficient Pt loading on hydrolyzed polyacrylonitrile-based nanofiber paper

E.J. Ra, K.H. An, S.J. Kim and Y.H. Lee REE-P-12 Electrochemical Study of Electrode for Ni-MH Battery

H.-S. Kim, J.M. Kim, C. Jung, D.-R. Chang, T.-W. Kim, S. Boo and J.-H. Lee REE-P-13 Fabrication Process Study of Plat Type Unit Cell for IT-SOFC

H.-S. Kim, J.-H. Song, S.-I. Park, Y.C. Shin, C. Jung, D.-R. Chang, S. Boo, J.-H. Lee and S.-H. Hyun REE-P-14 Electrochemical study of Ag deposited Si-C composite electrode for lithium ion batteries

J.-H. Song, W.-K. Han, J.-G. Cho and S.-G. Kang

46

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 REE-P-15 Synthesis and Characteristics of La2O3-YSZ Core/shell Structure powder for Thermal Barrier Coatings

S.-J. Kim, W.-K. Han, S.-G. Kang and M.-S. Han REE-P-16 A study of a high temperature corrosion for anodic part of a separator in molten carbonate fuel cells environment

C.-M. Choi, W-K. Han, Y.-H. Cheong, S.-G. Kang, J.-C. Shin and H.-C. Lim

May 23(WED.) 11:50 - 01:40 RHT-P-1


Investigation on Mechanical Property and Adhesion of Oxide Films Formed on Ni and Ni-Co Alloy at Room and High Temperature Environments

Y. Isomoto and H. Watanabe RHT-P-2

Relation of Currents between Discrete Lattice Hopping Model and Continuum Diffusion Model on Oxidation of Alloys

I. Ishikawa and H. Nanjo RHT-P-3

Yttrium and Cobalt Coatings on Ferritic Stainless Steels for SOFC Interconnects

S.-H. Kim, J.-Y. Huh, J-H. Jun, D.-H. Kim and J.-H. Jun RHT-P-4

Effects of W Contents in Co matrix of the Thermal Sprayed WC-Co on the Corrosion Behavior in Molten Zinc

B.-G. Seong S.-Y. Hwang, K.-Y. Kim and K.-A. Lee RHT-P-5

The

Effect

of

Carbon on Isothermal Oxidation Resistance of Austenitic Heat

Resistance Steels

M.O. Aminian, J. Hedjazi and Y. Kharazi May 23(WED.) 11:50 - 01:40


RNM-P-1 Fractal model assisted the corrosion studies by simulation of corrosion developing

Y. Weng and X. Li RNM-P-2 Evaluation on Corrosively Dissolved Gold Defects Induced by Alkanethiol Monolayer with Atomic Absorption Spectroscopy

Z. Cao, L. Zhang, C.-Y. Guo, F-C. Gong, S. Long, X.-C. He and S.-Z. Tan RNM-P-3 Study of the application of gel electrolyte in the reference electrode of Cu/CuSO4

C. Lin, L. Xu and Y. Liu RNM-P-4 Stray Current Corrosion Monitoring and Default Expert System for Urban Mass Transit

C. Wang, C. Ma, D. Zhang, M. Xue, Z. Wang and X. Li RNM-P-5 Study on Drainage of Stray Current Corrosion Default for Urban Mass Transit

J. Liu, C. Ma, G. Li, R. Liang, Z. Wang and J. Chen RNM-P-6 The Application of SPM in Corrosion Research

Y.-Q. Sui, J.-H. WU, C.-G. LIN and L.-N. Jiang RNM-P-7 Nano-scale Galvanostatic Reduction Behavior of Austenitic Stainless Steel

J.-J. Lee, S.-C. Na, W.-S. Yang, S.-S. Jang, H.-R. Yoo and W.-S. Hwang

47

International Corrosion Engineering Conference 2007 Seoul, Korea, May 20-24, 2007 RNM-P-8 Structural and electrochemical characterization of

Ni

nanostructure films on steels

with Brush plating and Sputter deposition

B. Subramanian, S. Mohan and S. Jayakrishnan

Gayageum Hall (Wednesday, 23 May 2007) 06:30 Banquet

* Program may be changed depending on the final situation of author.

48

Conference Time Table for Technical Program

Conference Time Table for Technical Program

Suggest Documents

ASHRAE 2014 Winter Conference Technical Program ...

conference technical program & schedule - Deep Foundations Institute

conference program - AADMD Conference

Conference Program - (PETRA) conference

Conference Program

CONFERENCE PROGRAM

conference program

Conference Program

Conference program

conference program

conference program

Conference Program

CONFERENCE PROGRAM

conference program

Conference Program

Conference Program

CONFERENCE PROGRAM

CONFERENCE PROGRAM

Conference Program

Conference Program

Conference Program

Technical Program

Technical Program

TIME TABLE