Design Pressure (PSIG) Design Vacuum (PSIG) ASME Code Stamped Design Temperature °F. Top Head Design Bottom Head Design Desired Outlet Height of vessel from floor level
-
-
-
Reset Heat Transfer
-
Initial Product Temperature °F Heat Transfer Duty with Heat Transfer Media Type Media Temperature °F end result Final Product Temperature °F Time to Accomplish Heat Transfer
Material of Construction
Product Contant Alloy / Internal Non-Product Contact Alloy / External Support Alloy / External Gasket Materials Are USP Class VI Materials Required?
NA - Heat Transfer
Type of Heat Transfer Material of Construction Heat Transfer Design Pressure (PSIG) (if known)
-
Insulation
Vessel Finish
Insulated or Non-Insulated
-
Product Contact Finish (Internal) Product Contact Weld Finish (Internal) Is Electropolish Required? (Internal) Non-Product Contact Finish (External) Non-Product Contact Weld Finish (External) Vessel Support Finish Vessel Support Weld Finish
Tank Notes (if applicable)
Nozzle Schedule Location
Size
Quantity
Description
Accessories / Notes
-
-
Agitation Hardware
NA - Agitator
Agitation Supplier Agitation Installer Agitation Type Motor Finish Gearbox Finish Process data Mixing Volume (Operating) Viscosity
Reset Agitator
-
Orientation Location Agitator Mounting Method
-
Available Power Phase /Hz / Volts Washdown Duty Motor Required Inverter Rated Motor Required
-
-
Notes for Agitation and Control (if applicable)
-
-
Rate of mixing Turn over Rate (Vol./ min)
VFD's and / or Controls
Is a VFD (Variable Frequency Drive) required Are Controls required