BS EN 60439-1. □ Adaptable design to meet a range of applications. □ IP
ratings to BS EN 60529 (see over). □ Wide range of materials and finishes. The.
S W I T C H B O A R D
E N C L O S U R E S
I Certified busbar systems, through fault and temperature test. I A fully welded design for maximum strength. I Form 4 Type 2 to Type 7 to BS EN 60439-1 I Adaptable design to meet a range of applications. I IP ratings to BS EN 60529 (see over) I Wide range of materials and finishes
The
Pain-free Enclosure Service
S W I T C H B O A R D
E N C L O S U R E S At ATE ordering enclosures has been honed to a smooth, pain-free process with just three easy stages…
Switchboard Overview Construction Fully welded Form 4 construction from folded sheet steel, designed to comply with BS EN 60439-1. Doors are single folded and fitted with EPDM gasket to a knife-edge seal. Compartment doors are fitted with semi internal hinges and secured by quarter-turn locks.
Our experience allows
IP Ratings • Upto IP54 • Internal separation IP2X
us to develop the best solution from just a
Materials
hand-drawn sketch
• 2mm mild steel case and doors • 3mm galvanised mounting plates
Finishes • • • •
RAL 7032 Textured as standard Any BS 4800 or RAL colours available Special finishes available Paint thickness, specialist pre-treatments
Busbars
Using the latest CAD
Our own certified systems from 30kA/1 sec through to 80kA/1 sec. Certified connections to incoming and outgoing devices are also available. All through fault and temperature rise tests ASTA witnessed.
technology we produce a three-dimensional plan
Earthing
of your enclosure
Earth studs are fitted to covers, doors and gland plates Earth bars are optional but are standard when busbars are fitted.
Lifting All enclosures are fitted with lifting eyebolts and ATE have certification for their own unique lifting arrangement.
Glanding Variety of options available: • Top and bottom entry • Steel, aluminium or brass gland plates
Leading edge manufacturing facilities
Options
enable fast, efficient
Lift off hinges T-type Handles 3 point latch system Top hats for isolators Separate plinth Cable boxes (rear and in cable duct) Door strengtheners Incoming busbar connections and fitting devices Fitting and connection of free-issue devices Top Boxes Transformer housings Thermographic screens Our unique pre-treatment phosphate and passivation process guarantees powder adhesion and scratch resistance with 2000 hours salt spray.
Call for further information or a quotation A
&
T
production to meet your exact requirements
Tel: 01384 212316
E N C LO S U R E S
LT D
E L E C T R I C A L E N C LO S U R E S & S H E E T S T E E L FA B R I C AT I O N S Unit A, Grazebrook Industrial Park, Peartree Lane, Dudley, West Midlands DY2 OXW Fax: 01384 238744 Email:
[email protected] Web site: www.at-enclosures.co.uk
Also specialists in Busbar Systems, Switchgear, General Enclosures and Special Projects
23262
Created by Charles Design & Marketing NJC8975 0607
• • • • • • • • • • • • •