Cod. AC99-096-9930SN. Cod. AC99-096-9904SP. Cod. AC99-092-0032SP. Cod. AC99-096-9902SN. Cod. 999VE020. Cod. AC99-096-990
Em i s s i o n L i n e
1 .1 1 0 .1 0
Isokinetic Heated Probe The used configuration involves a heated sampling probe with external filter according to EN 13284 and EN 14385. The special designs of our probes
Bath support
Cooling bath for 6 impingers Consists of a thermo-isolated stainless inox box. Inside the box, there are up to 6 impingers fitted: 3 of 500cc capacity and 3 250cc capacity.
allow to separate the different elements for easier management, and thus providing the ability to reconfigure them for different reference methods.
The cooling bath can be quickly connected to the heated through the support shown in the design.
Cod. AC99-096-0036SN PE Cod. AC99-096-0015SN glass
A support kit is necessary for mounting the cooling bath or the MCS condensing system to the heated probe equipped with a heated box
Cod. AC99-095-9901KP
Accessories To choose the right accessories for the specified determination, please refer to Tecora's sampling lines.
250 cc impinger for derived flow in PE For HF sampling
With flow separator to optimize bubbling
Cod. AC99-096-9904SP
47mm glass filterholder with derivation
With derivation after PTFE filterholder for additional low flow sampling
Cod. AC99-092-0032SP
"U" tube
Needed to connect two impingers.
Cod. AC99-096-9902SN
gas outlet connector
Connects through ball joint to the 250 cc derived flow impingers.
Cod. 999VE020
Flow regulation connector With PTFE regulation valve
Cod. AC99-096-9903SN
1.110.10
Ed. 1
Cod. AC99-096-9930SN
250 cc impinger for derived flow in glass
06/15 - Technical specifications may change without previous warning
Some EN methods for the sampling of compounds in the gas phase involve the use of bubblers , on a derived stream, positioned downstream of the probe.
Product Data Emission Line
TCR TECORA - Via delle Primule, 16 - Cogliate (MB), 20815, Italy - tel: +39 (375) 507.0400 - site: wwww.tcrtecora.com - email:
[email protected] -
[email protected]
Accessories for sampling lines with derivations according to EN standards
