ICICA 2019: The 8th International Conference on Intelligent Computing and Applications Swinburne University of Technology Melbourne, Australia, January 16-19, 2019 Conference website Submission link
http://icica.org/
https://easychair.org/conferences/?conf=icica2019
Submission deadline November 20, 2018 Topics: data mining bioinformatics image processing robotics and automation The 8th International Conference on Intelligent Computing and Applications (ICICA 2019) is the main annual research conference aims to bring together researchers around the world to exchange research results and address open issues in all aspects of Intelligent Computing and Applications.
Submission Guidelines 1. Language. English is the official language of the conference. The paper should be written and presented only in English.
2. Full paper (Publication & Presentation). Full paper submission is required if you consider publishing your paper.
3. Abstract (Presentation Only). If you consider making a presentation only at ICICA 2019 without paper publication, then you can only submit an abstract.
List of Topics Algorithms Automated Software Engineering Bioinformatics and Scientific Computing
Compilers and Interpreters Computer Animation Computer Architecture and Embedded Systems Computer Games Computer Graphics and Multimedia Computer Networks Computer Networks and Data Communication Computer Vision Computing Ethics Control Systems Data Compression Data Mining Digital Library Digital System and Logic Design W ireless Communication and Mobile Computing Event Driven Programming High Performance Computing Image Processing Information Systems
Knowledge Data Engineering
Multimedia Applications Neural Networks Pattern Recognition Programming Languages Robotics and Automation Software Engineering & CASE Technology in Education Theoretical Computer Science W ireless Sensor Networks
Data Communications Data Encryption Database Systems Expert Systems Human Computer Interaction Information Retrieval Internet and W eb Applications Mobile Computing Natural Language Processing Parallel and Distributed Computing Performance Evaluation Artificial Intelligence Bio-informatics Biomedical Engineering Computational Intelligence Computer Architecture & VLSI Computer Based Education Computer Graphics & Virtual Reality Computer Modeling Computer Security Computer Simulation Computer-aided Design/Manufacturing Computing Practices & Applications Digital Signal and Image Processing Distributed and Parallel Processing E-commerce and E-governance Reconfigurable Computing Systems Security & Cryptography
System Security Technology Management Ubiquitous Computing Distributed Systems Committees Conference Chairs
Prof. Ghassan Beydoun, University of Technology Sydney, Australia Prof. W illiam Guo, Central Queensland University, Australia
Program Chairs Prof. Jun Shen, University of W ollongong, Australia Assoc. Prof. Kai Qin, Swinburne University of Technology, Australia Prof. W ernhuar Tarng, National Tsing Hua University, Taiwan
Program Co-chairs Assoc. Prof. Takeshi Tsuchiya, Tokyo University of Science, Japan Prof. Guolei Tang, Dalian University of Technology, China
Technical Committee Prof. Yukio Hiranaka, Yamagata University, Japan Prof. Jane W . S. Liu, Academia Sinica, Taiwan Asst. Prof. Todsanai Chumwatana, Rangsit University, Thailand Dr. Srimannarayana Grandhi, Central Queensland University Melbourne, Australia Dr. Afizan Bin Azman, Multimedia University, Malaysia Assoc. Prof. Hussein Alzoubi, Yarmouk University, Jordan Dr. Tse Guan Tan, Universiti Malaysia K elantan, Malaysia Asst. Prof. Habib Seifzadeh, Islamic Azad University, Iran
Prof. Muhammad Sarfraz, Kuwait University, Kuwait Assoc. Prof. Monish Chatterjee, Asansol Engineering College, India Dr. Grienggrai Rajchakit, Maejo University, Thailand Dr. Mohammad H. Nadimi, Islamic Azad University, Iran Prof. Prabhat Kumar Mahanti, University of New Brunswick, Canada Assoc. Prof. Nishikant Bele, International Institute of Health Management Research, India Asst. Prof. Gabriele Mencagli, University of Pisa, Ita ly Prof. Hernán D. Merlino, Universidad Nacional de Lanús, Argentina Prof. José Herrera Quispe, National University of St Agustin, Peru Dr. Koorosh Gharehbaghi, RMIT University, Australia Dr. Jingjie Yeo, Massachusetts Institute of Technology, USA Prof. Harumi W atanabe, Tokai University, Japan Dr. Saman Shojae Chaeikar, Khaje Nasir Toosi University of Technology, Iran Prof. Vikas Rastogi, Delhi Technological University, India Dr. Santoso W ibowo, RMIT University, Australia Prof. Kun-Chou Lee, National Cheng-Kung University, Taiwan Prof. Surekha Bhanot, Birla Institute of Technology and Science Pilani, India Prof. Bernhard Peters, Université du Luxembourg, Luxembourg Assoc. Prof. Nobuhiko Ogura, Tokyo City University, Japan
Invited Speakers Speaker 1 Prof. Ghassan Beydoun, University of Technology Sydney, Australia Speaker 2 Prof. W illiam Guo, Central Queensland University, Australia Speaker 3 Assoc. Prof. Kai Qin, Swinburne University of Technology, Australia Speaker 4 Prof. W ernhuar Tarng, National Tsing H ua University, Taiwan Speaker 5 Assoc. Prof. Guolei Tang, Dalian University of Technology, China Publication Conference Proceedings: As the workshop of ICCMS 2019, selected papers of ICICA 2019
will be published in the conference proceedings of ICCMS 2019 as a special chapter, which will be archived in the ACM Digital Library and submitted for index by Ei Compendex, Scopus, Thomson Reuters Conference Proceedings Citation Index(ISI W eb of Science), etc.
Journal of Computers (ISSN: 1796-203X) Indexing/Abstracting: DBLP, EBSCO, DOAJ, ProQuest, INSPEC, ULRICH's Periodicals Directory, W orldCat, CNKI, etc.
Journal of Advances in Information Technology (ISSN:1798 -2340) Abstracting/Indexing: INSPEC; EBSCO; ULRICH's Periodicals Directory; W orldCat; CrossRef; Genam ics JournalSeek; Google Scholar; Ovid LinkSolver; etc.
Contact Ms. Kenny W ong Email:
[email protected] Tel: +86-28-86528758
Office Hour: 9:30--12:00, 13:30--18:00, Monday to Friday (GMT+8 Time Zone)
Saif Aldeen Saad Obayes Alkadhim M.Sc. Electromechanical Engineering (e-mail:
[email protected]). Saif Aldeen Saad Obayes: Born in Babylon (1984). earned his BSc in Electrical Engineering from Babylon University (2006), Higher Diploma in Power System technology from College of Electrical and Electronic Technology (2010), MSc degrees in ElectroMechanical System Engineering from University of Technology (2016), Baghdad, Iraq. More than 8 years’ experiences in ElectroMechanical systems. In terested in Internet of Things, CAD/CAM system, Industry Management and E -governments. Senior researcher. Participated in IEEE ROBOTICS AND AUTOMATION SOCIETY, IEEE Industrial Electronics Society, IEEE YOUNG PROFESSIONALS, IEEE
Biometrics Council, IEEE N anotechnology Council, IEEE Sensors Council and IEEE Systems Council.
1. Saif Aldeen Saad Obayes Al-Kadhim, and et al., Prototype Wireless Controller System based on Raspberry Pi and Arduino for Engraving Machine, UKSim-AMSS 19th International Conference on Modelling & Simulation, DOI: 10.1109/UKSim.2017.20. 2. Saif Aldeen Saad Obayes Al-Kadhim, Industrial Workshop Based on Internet of Things : Automated Manufacturing Systems Technology, Noor Publishing (August 1, 2017), ISBN-10: 3330965754, ISBN-13: 9783330965751. 3. Saif Aldeen Saad Obayes Al-Kadhim, and et al., CNC Machine Based on Embedded Wireless and Internet of Things for Workshop Development Article in IJCDS Journal Volume 6(Issue 4):205 · July 2017, DOI: 10.12785/ijcds/060406. 4. Al-Saedi, Ibtesam RK, Farag Mahel Mohammed, and Saif Aldeen Saad Obayes. "CNC Machine Based on Embedded Wireless and Internet of Things for Workshop Development." International Journal of Computing and Digital Systems 6.4 (2017): 205-213.
5. I. R. K. Al-Saedi, F. M. Mohammed and Saif Aldeen Saad Obayes Al-Kadhim, "CNC machine based on embedded wireless and Internet of Things for workshop development," 2017 International Conference on Control, Automation and Diagnosis (ICCAD), Hammamet, 2017, pp. 439-444. doi:10.1109/CADIAG.2017.8075699. 6. Saif Aldeen Saad Obayes Al-Kadhim, I. R. K. Al-Saedi and F. M. Mohammed, "Prototype Wireless Controller System Based on Raspberry Pi and Arduino for Engraving Machine," 2017 UKSim-AMSS 19th International Conference on Computer Modelling & Simulation (UKSim), Cambridge, 2017, pp. 69-74. doi: 10.1109/UKSim.2017.20. 7. Obayes, Saif Aldeen Saad, Ibtesam RK Al-Saedi, and Farag Mahel Mohammed. "Prototype Wireless Controller System based on Raspberry Pi and Arduino for Engraving Machine." Computer Modelling & Simulation (UKSim), 2017 UKSimAMSS 19th International Conference on. IEEE, 2017.
8. Obayes, Saif Aldeen Saad, Ibtesam R. K. Al-Saedi, and Basil Jabir Shanshool, " Microstrip Grid Antenna Array for 5G Mobile Devices," Journal of Communications, vol. 13, no. 5, pp. 225-229, 2018. Doi: 10.12720/jcm.13.5.225-229. 9. Obayes, Saif Aldeen Saad. Simulation of Multi-Machine Transient Stability. Diss. College of Electrical and Electronics Techniques, Middle Technical University, 2010. 10. Obayes, Saif Aldeen Saad. Analog Speech Scrambling by Using Wavelet Transform. Diss. University of Babylon, 2006. 11. Obayes, Saif Aldeen Saad. Application of Computer Numerical Control
Machine Based on Internet of Things System. Diss. University of Technology, 2017. 12. Obayes, Saif Aldeen Saad, Ibtesam RK Al-Saedi, and Basil Jabir Shanshool. "Microstrip Grid Antenna Array for 5G Mobile Devices." JCM 13.5 (2018): 225-229.
13. Al-Kadhim, Saif Aldeen Saad Obayes. "CNC Machine Based on Embedded Wireless and Internet of Things for Workshop Development." IJCDS 6.4 (2017): 205.
14. Obayes, Saif Aldeen Saad. "Solar Cell Parameter Extraction From Data using MATLAB and Simulink."
15. Al-Kadhim, Saif Aldeen Saad Obayes. "Communicating with Raspberry Pi via MAVLink."
16. Obayes, Saif Aldeen Saad, Sarah Kadhim Aboud. "LIGHT SENSOR TO SWITCH ON A LIGHT OR ANY DEVICE LDR.".Tequneical report
17. Obayes, Saif Aldeen Saad, Sarah Kadhim Aboud. (2017). LIGHT SENSOR TO SWITCH ON A LIGHT OR ANY DEVICE LDR. Project: IoT and Smart System Retrieved from Researchgate database. DOI:10.13140/RG.2.2.34584.49928.