ii the modeling problem - CiteSeerX

4 downloads 0 Views 69KB Size Report
2) Determine the BEP for the radio system. Each of these steps ... electronic equipment. A useful but rough and simple model will be proposed in the following.
A Simple Method to Estimate the Impact of Different Radiated Emission Limits on Digital Radio Receiver Performance Peter F. Stenumgaard, Member ,IEEE Abstract - A simple model to estimate the bit error probability (BEP) for a digital radio receiver, co-located with an undesired radiated interference source, is proposed. Co-location is defined as the area around the receiver (radius r), where an interferer has a significant impact on the BEP. The interference source is approximated to be of Gaussian type. A comparison of the emission limits given in Euronorm EN55022, Class A and B, and RE 102 in MIL-STD-461D on this radius r is presented. For Differential Phase-Shift Keying systems, assuming BEP