In-Service Inspection. API RP 571. C) Steam Receiver. ) API RP 572. D)
Refrigerant Receiver. ) API RP 579. ) E) Steam Boiler/Steam Generator ). API RP
573.
API 510 : 2014 API RP 571 : 2011 API RP 572 : 2009 API RP 579 : 2007 API RP 573 : 2013 API RP 573 : 2013 API 653 : 2014 API RP 575 : 2014 API 570 : 2016 API RP 574 : 2009 API RP 576 : 2009
)BS 7121 Part 2 : 2012 )ISO 9927 Part 1: 2013 )ISO 12482 : 2014 (en) )SS536 : 2008 ) SS343 Part 1 : 2014 SS 595 : Parts 1 to 3 : 2014 ISO1834 : 1999 BS EN 1492-1 : 2000 + A1 : 2008 SS343 Part 2 : 2014 SS343 Part 3 : 2014
Approved Signatories Category 1A Er. David Tay Yew Huat
All items
Er. Liam Kok Chye Category 1B Ms. Jennifer Lim
Item 1 excluding Item 1(I) Pressure Relief Valve and for In-service Inspection only Item 2
Ms. Goh Zhu Di
Item 1 excluding Item 1(I) Pressure Relief Valve and for In-service Inspection only Item 2
Category 2 Mr. Lim Kie Yong
Item 1 excluding Item 1(I) Pressure Relief Valve and for In-service Inspection only Item 2
Only Category 1A inspectors are permitted to inspect non-routine repair, modification, change to operating parameter, change to inspection methods and calculation for SAC endorsed inspection report.
Certificate No. :
IB-2011-057-A
Issue No. :
5
Date
21 June 2017
Page
3 of 3
Note
:
:
:
An inspection body's fulfilment of the requirements of ISO/IEC 17020:2012 means the Inspection body meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid inspection results. The management system requirements in ISO/IEC 17020:2012 (Section 8) are written in language relevant to inspection body operations and are aligned with the pertinent requirements of ISO 9001.