Input connector. Adapter cable supplied by Panasonic with the. BB-HCM581A
camera. Panasonic. BB-HCM581A camera. CAT5 cable run between the.
MS-102A and MS102C Connection Diagram Adapter cable supplied by Panasonic with the BB-HCM581A camera MS-102C Located in the ceiling above the camera
Audio Output of the MS-102C connects to the White “MIC” Input connector.
CAT5 Network connection
Panasonic BB-HCM581A camera
Volume Control on MS-102C to set the audio from the amplifier into the camera. Start with control fully counter-clockwise Spare/Gnd wire not used
MS-102C - Red Wire connects to “1” terminal MS-102C - Black Wire connects to “G” terminal
Red & Yellow Not used
Plug adapter cable into “AV” connector on camera
CAT5 connection plugs in here and connects to network POE switch
MS-102A - Black Wire connects to “F2 COM” terminal MS-102A - Red Wire connects to “F2 CNT” terminal
Amplifier Alert (F2 CNT and COM) connection to MS-102A
CAT5 cable run between the MS-102A and MS-102C
Spare/Gnd wire not used
Audio Input to MS-102A connects to the “Line Out” of the amplifier
MS-102A Located behind the Amplifier
Spare/Gnd wire not used
MS-102A and MS102C Connection Diagram CAT5 connection plugs in here and connects to network POE switch
MS-102A - Black Wire connects to “F2 COM” terminal MS-102A - Red Wire connects to “F2 CNT” terminal
Audio Input to MS-102A connects to the “Line Out” of the amplifier
Audio Output of the MS-102C connects to the “MIC” Input connector. MS-102C - Red Wire connects to “1” terminal MS-102C - Black Wire connects to “G” terminal
MS-102A Located behind the Amplifier
Spare/Gnd wire not used
CAT5 cable run between the MS-102A and MS-102C Volume Control on MS-102C to set the audio from the amplifier into the camera. Start with control fully counter-clockwise MS-102C Located in the ceiling above the camera
