American Augers mud pumps are standard stand-alone, self-powered machines
that are the perfect accessories to use with mud motors, large reamers or ...
P-600 Mud Pump
P-750 Mud Pump
Mud Pumps
American Augers mud pumps are standard stand-alone, self-powered machines that are the perfect accessories to use with mud motors, large reamers or whenever more mud volume is needed down hole. P-600 and P-750 Mud Pumps • allow the operator to get enough flow to keep the bore flushed clean of cuttings •
are designed with a compact skid mounting and provide a small footprint that are ideal for most drilling environments.
•
are compatible with any drill brand making them suitable for contractors operating a variety of sizes, makes and models of drilling equipment.
www.AmericanAugers.com
*Optional Quiet Pak for optimum noise reduction control
P-600
Mud Pump
Ty pical Flow R at es f or Popular Siz e M u d M o t o rs Be sure to allow enough extra mud flow to flood the bore
MUD MOT OR SIZE
FLOW RAT E / M I NUT E
Inches
Millimeters
U.S. Gallons
Liters
3 3/8
85.72
30 - 120
113.6 - 454.2
3 1/2
88.9
75 - 160
283.9 - 605.7
4 3/4
120.6
100 - 250
378.5 - 946.4
6 3/4
171.4
300 - 600
1,136 - 2,271
What Type of Contractor Should Use a Mud Pump? • Users of drilling equipment with pumping capacities of 25 U.S. Gallons (95 L)/minute or larger regardless of soil type or conditions. •
Drillers typically making bores that are greater than 6 1/2 in. (165 mm) diameter and more than 200 ft. (61 m) long.
•
Owners of mud motors for rock drilling applications.
•
Operators in areas where mud disposal is expensive or restricted.
Both the P-600 and the P-750 should be considered when working in rock formations where the operating drill's on-board mud pump has fluidlimited capacities and cannot produce enough pressure to drive the mud motor.
www.AmericanAugers.com
P-750
Mud Pump
Typical Flow R at es f or Popular Siz e Mud Mo t o rs Be sure to allow enough extra mud flow to flood the bore
MUD MOT OR SIZE
FLOW R AT E / M I NUT E
Inches
Millimet ers
U.S. Gallons
Li t ers
3 3/8
85.72
30 - 120
113.6 - 454.2
3 1/2
88.9
75 - 160
283.9 - 605.7
4 3/4
120.6
100 - 250
378.5 - 946.4
6 3/4
171.4
300 - 600
1,136 - 2,271
8
203.2
400 - 900
1,514 - 3,407
P-600 PERFORMANCE SPECIFICATIONS P o we r Tr ain Engine:
Caterpillar® C-15 Tier III Diesel *Tier III or Tier 4i determined by country of purchase
Fuel Capacity: Rating: Transmission: Maximum Speed: Clutch: Noise Rating: Battery:
300 U.S. Gallons (1,136 L) 475 HP (354 kW) Eaton-FRO-16210B, 10 speed 2100 RPM 15 1/ 2 in. (394 mm) twin disk 1 meter distance 104 dB(A) 3 meter distance 95 dB(A) (2) Deka 908DMF 12V, 1450 CCA
P u mp Pump Design: Maximum Pressure: Rated Capacity: Bore x Stroke:
Tri-Plex 600GPM 1,505 psi (104 bar) 600 U.S. Gallons* (2,067 L)/minute 6 x 6 in. (152.4 x 152.4 mm)
*Note: Pump capacity will vary depending on the overall mud weight, drilling fluid mixture/content and working elevation
C o n tr ols Remote Controls: Instruments:
Mud pump throttle, Mud pump start/stop, clutch actuator, horn remote Digital mud flow meter (gallons/liters per minute)
Dim e nsions Length:
20 ft. (6.096 m)
Height:
9 ft. (2.7 m)
Width:
8 ft. (2.49 m)
Weight Total Weight:
29,800 lbs. (13,520 kg) estimated 39,600 lbs. (17,962 kg) with sound enclosure
Ac c es s or ies Pulsation dampener on inlet and discharge (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) kamlock fittings (2) 25 ft. (7.6 m) discharge hoses with 3 in. (76.2 mm) NPT hammer unions Liner wash system with supply tank (2) 24 volt work lights
*Note: All product performance specifications, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.
P-750 PERFORMANCE SPECIFICATIONS P ower Tr ain Engine:
Caterpillar® C-18 Tier III Diesel *Tier III or Tier 4i determined by country of purchase
Fuel Capacity: Rating: Transmission: Maximum Speed: Clutch: Noise Rating: Battery:
300 U.S. Gallons (1,136 L) 600 HP (447 kW) Eaton-RTLO-22918B, 10 speed 2100 RPM 15 1/ 2 in. (394 mm) twin disk 1 meter distance 104 dB(A) 3 meter distance 95 dB(A) (2) Deka 908DMF 12V, 1450 CCA
P u mp Pump Design: Maximum Pressure: Rated Capacity: Bore x Stroke:
Quintiplex, piston and liner 1,500 psi (103 bar) 750 U.S. Gallons* (2,839 L)/minute 5 1/ 2 x 7 7/ 8 in. (139.7 x 200 mm)
*Note: Pump capacity will vary depending on the overall mud weight, drilling fluid mixture/content and working elevation
C o n tr ols Remote Controls: Instruments:
Mud pump throttle, Mud pump start/stop, clutch actuator, horn remote Digital mud flow meter (gallons/liters per minute)
Dim e nsions Length:
25 ft. 6 in. (7.8 m)
Height:
10 ft. 3 in. (3.12 m)
Width:
8 ft. (2.49 m)
Weight Total Weight:
47,800 lbs. (21,680 kg)
A cc e ssor ie s Pulsation dampener on inlet and discharge (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) kamlock fittings 4 in. (102 mm) NPT hammer union discharge connection Liner wash system with supply tank (2) 24 volt work lights *Note: All product performance specifications, components, weights, dimensions and other related information is subject to change without notice from the manufacturer.
AMERICAN AUGERS The American Augers line of underground construction equipment is second-to-none. • Auger Boring Machines • Maxi-Rig & Mid-Size Directional Drills • Oil & Gas Drilling Rigs • Mud Pump & Cleaning Systems • Product Tooling & Accessories American Augers products are manufactured at the company’s 241,000 square-foot facility in West Salem, Ohio, in the heart of Amish country between Columbus and Cleveland. Since the founding of American Augers in 1970, there has never been a change in the company’s core value: having products developed by a can-do work force that focuses on mechanical, technological and customer-based design improvements. Our goal is to always exceed customer expectations by providing products that are not a cost of doing business, but an Investment in Success. Did You Know? American Augers was the first HDD manufacturer to eliminate chain and utilize a rack and pinion carriage design which is now the industry standard. Our rack and pinion drive provides smoother carriage movement, more precise operating control, long system life and no complicated parts. American Augers machines are supported through a dedicated parts and technical service department. We are here to help whenever you need us 24 hours a day, 7 days a week, emergency or not.
www.AmericanAugers.com Envi ron m e ntal Commitment American Augers is committed to manufacturing equipment that helps to preserve the sanctity of the global environment, and has done so by reducing noise and/or emissions outputs, and emphasizing the fact that our trenchless technology equipment requires little or no open cutting, which has very minimal impacts on natural surfaces, features, or habitats.
1212
