EN 455. EN 374. EN 374 uvex PROFAS u-fit nitrile. Outstanding protection and
excellent dexterity u-fit nitrile gloves fit snugly and are the perfect choice for ...
Highly versatile and extremely functional
uvex PROFAS u-fit at a glance u-fit nitrile 60525 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, nitrile, powder-free, textured fingertips Material thickness: Approx. 0.12 mm Colour: Green Contents: Box of 100
EN 374: Protective gloves against chemicals and micro-organisms:
Article: Article no.: Certification:
EN EN 455: Medical gloves for single use:
Article: Article no.: Certification:
The human hand is a marvel of nature which is just as well because it is often exposed to demanding external influences and dangers. With the u-fit product range, uvex PROFAS offers quality disposable safety gloves which guarantee a high degree of safety and functionality.
u-fit latex 60526 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, latex, powder-free, polymer inside coating Material thickness: Approx. 0.12 mm Colour: White Contents: Box of 100
EN 374-2: Determination of resistance to penetration Testing in accordance with EN 374-2 confirms whether a glove is free of imperfections and by definition resistant to liquids and micro-organisms. The u-fit gloves are tested to an AQL of 1.5 during production. Pictogram for waterproof safety gloves and limited chemical resistance
Pictogram for protection against bacteriological contamination
EN 455-1: Requirements and testing for freedom from holes EN 455-2: Requirements and testing for physical properties EN 455-3: Requirements and testing for biological evaluation
Use of the safety gloves when in contact with food: These symbols certify that the gloves do not pose a migration risk when used in direct contact with foodstuffs. Testing is performed by an accredited testing authority in accordance with the German Food and Feed Code (LFGB). Please note the product specifications.
uvex PROFAS u-fit gloves offer reliable protection in many industry sectors, including the chemical, medical, service and food industries, enabling comfortable and precise work to be conducted. uvex PROFAS disposable safety gloves are available in two different materials to cater for this wide range of application areas: u-fit nitrile and u-fit latex.
Dealer’s stamp
PROFAS GmbH & Co. KG
UVEX ARBEITSSCHUTZ GMBH
Elso-Klöver-Straße 6 · 21337 Lüneburg P.O. Box 2447 · 21314 Lüneburg GERMANY
Würzburger Straße 181–189 · 90766 Fürth P.O. Box 2542 · 90715 Fürth GERMANY
Tel.: Fax:
Tel.: Fax:
+49 4131 95020 +49 4131 84338
E-mail:
[email protected] Internet: www.profas.com Members of the uvex group
+49 911 9736-0 +49 911 9736-1760
E-mail:
[email protected] Internet: www.uvex-safety.com
UVEX (UK) LIMITED uvex House Farnham Trading Estate Farnham Surrey GU9 9NW GREAT BRITAIN Tel.: Fax: E-mail: Internet:
+44 1252 73 12 00 +44 1252 73 39 68
[email protected] www.uvex-safety.co.uk
UVEX SAFETY AUSTRALIA PTY, LTD. Unit 3, Riverside Centre 24-28 River Road West P.O. Box 6144 Parramatta NSW 21 50 AUSTRALIA Tel.: +61 2 9891 1700 Fax: +61 2 9891 1788 E-mail:
[email protected] Internet: www.uvex-safety.com.au
1.000.675/10.08/4/19 · Printed in Germany. Errors excepted. Subject to technical alterations. © 2008 – PROFAS GMBH & CO. KG
uvex PROFAS u-fit
u-fit disposable safety gloves
Perfect dexterity and performance
Highly versatile and extremely functional
uvex PROFAS u-fit at a glance u-fit nitrile 60525 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, nitrile, powder-free, textured fingertips Material thickness: Approx. 0.12 mm Colour: Green Contents: Box of 100
EN 374: Protective gloves against chemicals and micro-organisms:
Article: Article no.: Certification:
EN EN 455: Medical gloves for single use:
Article: Article no.: Certification:
The human hand is a marvel of nature which is just as well because it is often exposed to demanding external influences and dangers. With the u-fit product range, uvex PROFAS offers quality disposable safety gloves which guarantee a high degree of safety and functionality.
u-fit latex 60526 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, latex, powder-free, polymer inside coating Material thickness: Approx. 0.12 mm Colour: White Contents: Box of 100
EN 374-2: Determination of resistance to penetration Testing in accordance with EN 374-2 confirms whether a glove is free of imperfections and by definition resistant to liquids and micro-organisms. The u-fit gloves are tested to an AQL of 1.5 during production. Pictogram for waterproof safety gloves and limited chemical resistance
Pictogram for protection against bacteriological contamination
EN 455-1: Requirements and testing for freedom from holes EN 455-2: Requirements and testing for physical properties EN 455-3: Requirements and testing for biological evaluation
Use of the safety gloves when in contact with food: These symbols certify that the gloves do not pose a migration risk when used in direct contact with foodstuffs. Testing is performed by an accredited testing authority in accordance with the German Food and Feed Code (LFGB). Please note the product specifications.
uvex PROFAS u-fit gloves offer reliable protection in many industry sectors, including the chemical, medical, service and food industries, enabling comfortable and precise work to be conducted. uvex PROFAS disposable safety gloves are available in two different materials to cater for this wide range of application areas: u-fit nitrile and u-fit latex.
Dealer’s stamp
PROFAS GmbH & Co. KG
UVEX ARBEITSSCHUTZ GMBH
Elso-Klöver-Straße 6 · 21337 Lüneburg P.O. Box 2447 · 21314 Lüneburg GERMANY
Würzburger Straße 181–189 · 90766 Fürth P.O. Box 2542 · 90715 Fürth GERMANY
Tel.: Fax:
Tel.: Fax:
+49 4131 95020 +49 4131 84338
E-mail:
[email protected] Internet: www.profas.com Members of the uvex group
+49 911 9736-0 +49 911 9736-1760
E-mail:
[email protected] Internet: www.uvex-safety.com
UVEX (UK) LIMITED uvex House Farnham Trading Estate Farnham Surrey GU9 9NW GREAT BRITAIN Tel.: Fax: E-mail: Internet:
+44 1252 73 12 00 +44 1252 73 39 68
[email protected] www.uvex-safety.co.uk
UVEX SAFETY AUSTRALIA PTY, LTD. Unit 3, Riverside Centre 24-28 River Road West P.O. Box 6144 Parramatta NSW 21 50 AUSTRALIA Tel.: +61 2 9891 1700 Fax: +61 2 9891 1788 E-mail:
[email protected] Internet: www.uvex-safety.com.au
1.000.675/10.08/4/19 · Printed in Germany. Errors excepted. Subject to technical alterations. © 2008 – PROFAS GMBH & CO. KG
uvex PROFAS u-fit
u-fit disposable safety gloves
Perfect dexterity and performance
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit
Outstanding protection and excellent dexterity u-fit nitrile gloves fit snugly and are the perfect choice for precision work which also requires mechanical strength.
MATERIAL
Properties of/areas of application for u-fit nitrile: • Reliable protection from splashes when working with chemicals in the form of acids, alkalis, solids and aqueous saline solutions • Highly resistant to grease and oil, therefore highly suited for use in production
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Nitrile
Latex with polymer inside coating
Permeation list
Before handling chemicals in the workplace, it is important to first ascertain which glove material offers the best possible protection. Disposable gloves offer extensive protection when handling solids and aqueous saline solutions. Extra special care should be taken when handling organic solvents. The following overview should be used as a guide. Resistant
Material thickness approx. 0.12 mm Silicone-free
CERTIFICATION
EN 374
EN 374
Acids (highly concentrated) Acids (less concentrated)
Good mechanical strength Good chemical resistance (primarily solids)
Please check that the safety glove material is suitable before use in the workplace. Use this comprehensive database of standard chemicals and the corresponding permeation resistances offered by our u-fit range as a guideline. For more information, please contact your uvex PROFAS customer advisor.
Good grip
EN 455
HANDLING
u-fit latex
Solids
EN 374, EN 455
Very good mechanical strength Good chemical resistance (splashproof)
u-fit nitrile
Alkalis
With latex proteins
Handling foodstuffs (LFGB and RAL certification) PROPERTIES
Not resistant
Aqueous saline solutions
Powder-free No latex proteins
Limited resistance
Solvents
SUBSTANCE
Dispenser box with large opening
NITRILE
LATEX
SOLVENTS
Reinforced rolled edge – easy to put on
uvex PROFAS u-fit latex
Anatomically shaped for working with flexibility and safety
Acetone
not suitable
not suitable
Ethanol
not suitable
not suitable
Isopropanol
27 min
not suitable
n-heptane
31 min
not suitable
Perchlorethylene
17 min
not suitable
not suitable
not suitable
Ammonium chloride
> 480 min
> 480 min
Ferric chloride
> 480 min
> 480 min
18 min
not suitable
Potassium hydroxide, 30 %
> 480 min
> 480 min
Sodium hydroxide, 30 %
> 480 min
> 480 min
Ferrous sulphate
> 480 min
> 480 min
Citric acid
> 480 min
> 480 min
365 min
40 min
not suitable
not suitable
Formic acid, 10 %
143 min
70 min
Acetic acid, 10 %
186 min
44 min
Phosphoric acid, 10 %
> 480 min
> 480 min
Nitric acid, 10 %
> 480 min
150 min
Hydrochloric acid, 10%
> 480 min
114 min
Sulphuric acid, 25 %
> 480 min
> 480 min
Toluene AREA OF APPLICATION
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Precision assembly work, dry
+
+
Precision assembly work, oily
+
–
Product protection
+
+
Gentle cleaning
+
+
Examination work
+
+
+
+
Chemicals
Short-term work, in acc. with resistance list
Short-term work, in acc. with resistance list (limited)
Paint shop
As splash protection
As splash protection
Food
u-fit latex gloves are highly functional safety gloves made of natural latex. Made from a very stretchy material, they adapt perfectly to the shape of the hand and offer excellent dexterity for all types of precision work.
AQUEOUS SALINE SOLUTIONS
Properties of/areas of application for u-fit latex: • Handling solids, e.g. in the lab • Protection from aqueous saline solutions
ALKALIS
EN 374
Ammonia, 25 %
EN 374
EN 455
SOLIDS
ACIDS (HIGHLY CONCENTRATED) Hydrochloric acid, 32 % Sulphuric acid, 96 % ACIDS (LESS CONCENTRATED)
The data listed in the table above was developed under laboratory conditions at 22 °C in accordance with EN 374-3. As additional influences such as higher temperatures and mechanical strain (e.g. stretching and wear) often occur in practice, this data should only be used as a guideline and is not a substitute for extensive suitability tests.
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit
Outstanding protection and excellent dexterity u-fit nitrile gloves fit snugly and are the perfect choice for precision work which also requires mechanical strength.
MATERIAL
Properties of/areas of application for u-fit nitrile: • Reliable protection from splashes when working with chemicals in the form of acids, alkalis, solids and aqueous saline solutions • Highly resistant to grease and oil, therefore highly suited for use in production
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Nitrile
Latex with polymer inside coating
Permeation list
Before handling chemicals in the workplace, it is important to first ascertain which glove material offers the best possible protection. Disposable gloves offer extensive protection when handling solids and aqueous saline solutions. Extra special care should be taken when handling organic solvents. The following overview should be used as a guide. Resistant
Material thickness approx. 0.12 mm Silicone-free
CERTIFICATION
EN 374
EN 374
Acids (highly concentrated) Acids (less concentrated)
Good mechanical strength Good chemical resistance (primarily solids)
Please check that the safety glove material is suitable before use in the workplace. Use this comprehensive database of standard chemicals and the corresponding permeation resistances offered by our u-fit range as a guideline. For more information, please contact your uvex PROFAS customer advisor.
Good grip
EN 455
HANDLING
u-fit latex
Solids
EN 374, EN 455
Very good mechanical strength Good chemical resistance (splashproof)
u-fit nitrile
Alkalis
With latex proteins
Handling foodstuffs (LFGB and RAL certification) PROPERTIES
Not resistant
Aqueous saline solutions
Powder-free No latex proteins
Limited resistance
Solvents
SUBSTANCE
Dispenser box with large opening
NITRILE
LATEX
SOLVENTS
Reinforced rolled edge – easy to put on
uvex PROFAS u-fit latex
Anatomically shaped for working with flexibility and safety
Acetone
not suitable
not suitable
Ethanol
not suitable
not suitable
Isopropanol
27 min
not suitable
n-heptane
31 min
not suitable
Perchlorethylene
17 min
not suitable
not suitable
not suitable
Ammonium chloride
> 480 min
> 480 min
Ferric chloride
> 480 min
> 480 min
18 min
not suitable
Potassium hydroxide, 30 %
> 480 min
> 480 min
Sodium hydroxide, 30 %
> 480 min
> 480 min
Ferrous sulphate
> 480 min
> 480 min
Citric acid
> 480 min
> 480 min
365 min
40 min
not suitable
not suitable
Formic acid, 10 %
143 min
70 min
Acetic acid, 10 %
186 min
44 min
Phosphoric acid, 10 %
> 480 min
> 480 min
Nitric acid, 10 %
> 480 min
150 min
Hydrochloric acid, 10%
> 480 min
114 min
Sulphuric acid, 25 %
> 480 min
> 480 min
Toluene AREA OF APPLICATION
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Precision assembly work, dry
+
+
Precision assembly work, oily
+
–
Product protection
+
+
Gentle cleaning
+
+
Examination work
+
+
+
+
Chemicals
Short-term work, in acc. with resistance list
Short-term work, in acc. with resistance list (limited)
Paint shop
As splash protection
As splash protection
Food
u-fit latex gloves are highly functional safety gloves made of natural latex. Made from a very stretchy material, they adapt perfectly to the shape of the hand and offer excellent dexterity for all types of precision work.
AQUEOUS SALINE SOLUTIONS
Properties of/areas of application for u-fit latex: • Handling solids, e.g. in the lab • Protection from aqueous saline solutions
ALKALIS
EN 374
Ammonia, 25 %
EN 374
EN 455
SOLIDS
ACIDS (HIGHLY CONCENTRATED) Hydrochloric acid, 32 % Sulphuric acid, 96 % ACIDS (LESS CONCENTRATED)
The data listed in the table above was developed under laboratory conditions at 22 °C in accordance with EN 374-3. As additional influences such as higher temperatures and mechanical strain (e.g. stretching and wear) often occur in practice, this data should only be used as a guideline and is not a substitute for extensive suitability tests.
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit
Outstanding protection and excellent dexterity u-fit nitrile gloves fit snugly and are the perfect choice for precision work which also requires mechanical strength.
MATERIAL
Properties of/areas of application for u-fit nitrile: • Reliable protection from splashes when working with chemicals in the form of acids, alkalis, solids and aqueous saline solutions • Highly resistant to grease and oil, therefore highly suited for use in production
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Nitrile
Latex with polymer inside coating
Permeation list
Before handling chemicals in the workplace, it is important to first ascertain which glove material offers the best possible protection. Disposable gloves offer extensive protection when handling solids and aqueous saline solutions. Extra special care should be taken when handling organic solvents. The following overview should be used as a guide. Resistant
Material thickness approx. 0.12 mm Silicone-free
CERTIFICATION
EN 374
EN 374
Acids (highly concentrated) Acids (less concentrated)
Good mechanical strength Good chemical resistance (primarily solids)
Please check that the safety glove material is suitable before use in the workplace. Use this comprehensive database of standard chemicals and the corresponding permeation resistances offered by our u-fit range as a guideline. For more information, please contact your uvex PROFAS customer advisor.
Good grip
EN 455
HANDLING
u-fit latex
Solids
EN 374, EN 455
Very good mechanical strength Good chemical resistance (splashproof)
u-fit nitrile
Alkalis
With latex proteins
Handling foodstuffs (LFGB and RAL certification) PROPERTIES
Not resistant
Aqueous saline solutions
Powder-free No latex proteins
Limited resistance
Solvents
SUBSTANCE
Dispenser box with large opening
NITRILE
LATEX
SOLVENTS
Reinforced rolled edge – easy to put on
uvex PROFAS u-fit latex
Anatomically shaped for working with flexibility and safety
Acetone
not suitable
not suitable
Ethanol
not suitable
not suitable
Isopropanol
27 min
not suitable
n-heptane
31 min
not suitable
Perchlorethylene
17 min
not suitable
not suitable
not suitable
Ammonium chloride
> 480 min
> 480 min
Ferric chloride
> 480 min
> 480 min
18 min
not suitable
Potassium hydroxide, 30 %
> 480 min
> 480 min
Sodium hydroxide, 30 %
> 480 min
> 480 min
Ferrous sulphate
> 480 min
> 480 min
Citric acid
> 480 min
> 480 min
365 min
40 min
not suitable
not suitable
Formic acid, 10 %
143 min
70 min
Acetic acid, 10 %
186 min
44 min
Phosphoric acid, 10 %
> 480 min
> 480 min
Nitric acid, 10 %
> 480 min
150 min
Hydrochloric acid, 10%
> 480 min
114 min
Sulphuric acid, 25 %
> 480 min
> 480 min
Toluene AREA OF APPLICATION
uvex PROFAS u-fit nitrile
uvex PROFAS u-fit latex
Precision assembly work, dry
+
+
Precision assembly work, oily
+
–
Product protection
+
+
Gentle cleaning
+
+
Examination work
+
+
+
+
Chemicals
Short-term work, in acc. with resistance list
Short-term work, in acc. with resistance list (limited)
Paint shop
As splash protection
As splash protection
Food
u-fit latex gloves are highly functional safety gloves made of natural latex. Made from a very stretchy material, they adapt perfectly to the shape of the hand and offer excellent dexterity for all types of precision work.
AQUEOUS SALINE SOLUTIONS
Properties of/areas of application for u-fit latex: • Handling solids, e.g. in the lab • Protection from aqueous saline solutions
ALKALIS
EN 374
Ammonia, 25 %
EN 374
EN 455
SOLIDS
ACIDS (HIGHLY CONCENTRATED) Hydrochloric acid, 32 % Sulphuric acid, 96 % ACIDS (LESS CONCENTRATED)
The data listed in the table above was developed under laboratory conditions at 22 °C in accordance with EN 374-3. As additional influences such as higher temperatures and mechanical strain (e.g. stretching and wear) often occur in practice, this data should only be used as a guideline and is not a substitute for extensive suitability tests.
Highly versatile and extremely functional
uvex PROFAS u-fit at a glance u-fit nitrile 60525 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, nitrile, powder-free, textured fingertips Material thickness: Approx. 0.12 mm Colour: Green Contents: Box of 100
EN 374: Protective gloves against chemicals and micro-organisms:
Article: Article no.: Certification:
EN EN 455: Medical gloves for single use:
Article: Article no.: Certification:
The human hand is a marvel of nature which is just as well because it is often exposed to demanding external influences and dangers. With the u-fit product range, uvex PROFAS offers quality disposable safety gloves which guarantee a high degree of safety and functionality.
u-fit latex 60526 Chemistry: EN 374 Medicine: EN 455 Food: LFGB and RAL Sizes: S, M, L, XL Length approx.: 24 cm Design: Five-finger glove, latex, powder-free, polymer inside coating Material thickness: Approx. 0.12 mm Colour: White Contents: Box of 100
EN 374-2: Determination of resistance to penetration Testing in accordance with EN 374-2 confirms whether a glove is free of imperfections and by definition resistant to liquids and micro-organisms. The u-fit gloves are tested to an AQL of 1.5 during production. Pictogram for waterproof safety gloves and limited chemical resistance
Pictogram for protection against bacteriological contamination
EN 455-1: Requirements and testing for freedom from holes EN 455-2: Requirements and testing for physical properties EN 455-3: Requirements and testing for biological evaluation
Use of the safety gloves when in contact with food: These symbols certify that the gloves do not pose a migration risk when used in direct contact with foodstuffs. Testing is performed by an accredited testing authority in accordance with the German Food and Feed Code (LFGB). Please note the product specifications.
uvex PROFAS u-fit gloves offer reliable protection in many industry sectors, including the chemical, medical, service and food industries, enabling comfortable and precise work to be conducted. uvex PROFAS disposable safety gloves are available in two different materials to cater for this wide range of application areas: u-fit nitrile and u-fit latex.
Dealer’s stamp
PROFAS GmbH & Co. KG
UVEX ARBEITSSCHUTZ GMBH
Elso-Klöver-Straße 6 · 21337 Lüneburg P.O. Box 2447 · 21314 Lüneburg GERMANY
Würzburger Straße 181–189 · 90766 Fürth P.O. Box 2542 · 90715 Fürth GERMANY
Tel.: Fax:
Tel.: Fax:
+49 4131 95020 +49 4131 84338
E-mail:
[email protected] Internet: www.profas.com Members of the uvex group
+49 911 9736-0 +49 911 9736-1760
E-mail:
[email protected] Internet: www.uvex-safety.com
UVEX (UK) LIMITED uvex House Farnham Trading Estate Farnham Surrey GU9 9NW GREAT BRITAIN Tel.: Fax: E-mail: Internet:
+44 1252 73 12 00 +44 1252 73 39 68
[email protected] www.uvex-safety.co.uk
UVEX SAFETY AUSTRALIA PTY, LTD. Unit 3, Riverside Centre 24-28 River Road West P.O. Box 6144 Parramatta NSW 21 50 AUSTRALIA Tel.: +61 2 9891 1700 Fax: +61 2 9891 1788 E-mail:
[email protected] Internet: www.uvex-safety.com.au
1.000.675/10.08/4/19 · Printed in Germany. Errors excepted. Subject to technical alterations. © 2008 – PROFAS GMBH & CO. KG
uvex PROFAS u-fit
u-fit disposable safety gloves
Perfect dexterity and performance