Quickstart Guide

48 downloads 18266 Views 289KB Size Report
E GSM GPS Power ... drive for 15-20 minutes so the device can register on the GPS network and begin ... To track your HCT Micro, open a browser window and go to www. ... Login tab on the top right of the website and click on GPS Tracking.
WHEN YOU NEED TO KNOW.

WHEN YOU NEED TO KNOW.

Your BrickHouse HCT Micro was activated before being shipped to you and you should have received an email containing your default login information. If you did not receive your login information, please contact our support team at 800-654-7966 or by email at [email protected] Installation of the HCT Micro is similar to that of a car stereo. If you are not confident in your ability to install, we suggest that you contact a local car stereo/alarm installer. The HCT runs on your vehicle’s power source. The red wire (power) should be directly wired to a constant 8V - 16V power source found at the key source or fuse panel. The black wire (ground) should be securely fastened to a grounded screw or to the chassis ground. The white wire (ignition) is the ignition event wire and is best installed directly to the ignition wire. Ensure that power is available ONLY when the vehicle is turned on. Connecting this device to constant power will damage your vehicle’s battery over time. All makes and models of vehicles are different - we recommend you make sure that you know your particular vehicle’s Constant and Ignition wires prior to installation. Once finished, take the car for a drive for 15-20 minutes so the device can register on the GPS network and begin reporting. By default, the HCT Micro reports every 30 seconds when your car ignition is turned on and will report every 30 minutes when the ignition is off. To track your HCT Micro, open a browser window and go to www.BrickhouseSecurity.com. Hover your cursor over the Login tab on the top right of the website and click on GPS Tracking. Enter your login information and press the Submit button.

Note: For a complete HCT Micro manual, troubleshooting tips, and how-to videos, please go to http://help.brickhousesecurity.com and type HCT Micro in the search box.