Specs Document

Grove YB4400 Series Product Guide

Features • YB4409: 7,7 t (8.5 USt) three-section boom with 7,6 m (25 ft 2 in) tip height • YB4409XL: 7,7 t (8.5 USt) three-section boom with 10,2 m (33 ft 6 in) tip height • YB4409-2: 8,1 t (9 USt) three-section boom with 11,6 m (38 ft 2 in) tip height • YB4411: 9,5 t (10.5 USt) three-section boom with 11,6 m (38 ft 2 in) tip height • 1,8 m (6 ft) fixed extension (YB4409/XL) and 3,6 m (12 ft) offsettable swingaway extension (YB4409-2 and YB4411) • 63,4 kW (85 bhp) Cummins diesel engine or 59,6 kW (80 bhp) GM EFI dual fuel engine

Features Boom

Standard: 6,4 m (21 ft) main boom on the YB4409. 9,1 m (30 ft) main boom on the YB4409XL. 10, 0 m (32 ft 10 in) main boom on the YB4409-2 and YB4411. Optional: Manual fourth main boom section adds 3,0 m (10 ft) additional main boom length on YB4409 and YB4409XL only.

Engine

Standard: Cummins QSB 3.3 L turbo-charged diesel rated at 63,4 kW (85 bhp) at 2600 rpm.

Pivoting boom nose Cab

Standard: Open air cab shell with overhead safety glass. Optional: Closed cab with split

Standard on the YB4409-2 and YB4411 the exclusive pivoting boom nose allows operators to decrease the overall boom head depth and operate in more confined areas.

hinged door, heater/defroster, and all window glass.

Steering

Standard: four-wheel coordinated steer Standard: two-wheel, four-wheel, and crab steer with self alignment (YB4411) Optional: two-wheel, four-wheel, and crab steer (standard on YB4409-2)

Contents

Specifications

4

YB4409 (dimensions/turning radius/range diagram/load chart)

7

YB4409XL (dimensions/turning radius/range diagram/load chart)

11

YB4409-2 (dimensions/turning radius/range diagram/load chart)

17

YB4411 (dimensions/turning radius/range diagram/load chart)

21

YB4409 DIN/ISO (range diagram/load chart)

25

YB4409XL DIN/ISO (range diagram/load chart)

27

YB4409-2 DIN/ISO (range diagram/load chart)

29

YB4411 DIN/ISO (range diagram/load chart)

31

33

Symbols glossary

Specifications Superstructure

Load indicator (wireless LSI)

Boom YB4409: 2,9 m – 6,5 m (9 ft 8 in – 21 ft 2 in) threesection full power boom. Maximum tip height: 7,6 m (25 ft 2 in) YB4409XL: 3,8 m – 9,2 m (12 ft 8 in – 30 ft 2 in) three- section full power boom. Maximum tip height: 10,2 m (33 ft 6 in) YB4409-2 and YB4411: 4,2 m – 10,0 m (13 ft 10 in – 32 ft 10 in) three-section full power boom. Maximum tip height: 11,6 m (38 ft 2 in) *Optional boom YB4409 and YB4409XL: Manual fourth main boom fly section adds 3,0 m (10 ft) additional boom length.

A simple, effective, and easy to use load indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel. *Load Moment Indicator (hardwired LMI) Digital display of boom angle, boom length, boom radius, capacity, and allows for operator in-put to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters. (hardwired system)

*Boom extension YB4409 and YB4409XL: 1,8 m (6 ft) fixed pin on extension YB4409-2 and YB4411: 3,6 m (12 ft) offsettable extension 3,6 m - 5,4 m (12 ft- 18 ft) telescopic offsettable extension

Swing Ball bearing swing circle with 360° continuous rotation. Hydraulic driven worm gear and pinion. Maximum speed: 2.05 rpm Hydraulic system

Boom nose YB4409 / XL: Single sheave non-pivoting YB4409-2 and YB4411: Single sheave, three-position (0˚, + 30˚, + 80˚) pivoting boom nose for minimizing head space requirements. Lowers head height. 0,26 m (10.5 in) when nose is pivoted fully forward. Boom elevation Single double acting hydraulic cylinder with integral holding valve. Elevation: 0° to 60° for the YB4409 and YB4409XL 0° to 72° for the YB4409-2 and YB4411 Anti-two block device

YB4409 and 4409XL: (2) gear pumps YB4409-2 and YB4411: Variable displacement piston pump and piggyback gear pump. Combined flow: 107,9Lpm (28.5 gpm) Maximum system operating pressure: 3600 psi YB4409 and YB4409XL: Six section valve bank mounted in dash panel with direct mechanical linkage for low effort lever control. YB4409-2 and YB4411: Six section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks. Return line filter with full flow by-pass protection and service indicator. 89 L (23.5 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage.

Standard anti-two block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause two-blocking.

4

*Denotes optional equipment

Specifications Superstructure continued

Hoist specifications YB4409 / XL: Worm drive with counter-balance valving. Equal speed power up and down. YB4409-2 and YB4411: Piston motor drive with spring applied/hydraulic released brake. Drum diameter: YB4409 / XL: 0,24 m (9.69 in) YB4409-2 and YB4411: 0,27 m (10.63 in) Maximum single line pull: YB4409 / XL: 4854 kg (10,700 lb) YB4409-2 and YB4411: 6350 kg (14,000 lb) Maximum single line speed: YB4409 / XL: 26,8 m/min (88 fpm) YB4409-2 and YB4411: 36,6 m/min (120 fpm) Maximum permissible single line pull: YB4409 / XL: 3855 kg (8500 lb) (12,7 mm [1/2 inch] Python Ultra XIPS) YB4409-2 and YB4411: 4536 kg (10,000 lb) (14,0 mm [9/16 inch] EEIPS) Rope length : YB4409 / XL: (three-section boom) 29,6 m (97 ft) (four-section boom) 39,6 m (130 ft) YB4409-2 and YB4411: 36,6 m (120 ft) Carrier

Frame High strength alloy steel constructed with integral outrigger housings; front and rear lifting, towing, and tie-down lugs. 38 ft2 carrydeck size with 6350 kg (14,000 lb) carrying capacity (YB4409/XL / YB4409-2) and 7711 kg (17,000 lb) carrying capacity (YB4411). Deck coated with anti-skid treatment. Outriggers YB4409, YB4409XL and YB4409-2: Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. YB4411: Hydraulic telescoping beam with oblique type jack provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack. Padsize YB4400 Series: 18 cm x 20 cm (7.4 in x 7.8 in) Maximum outrigger pad load: YB4409/XL: 122 psi YB4411: 387 psi YB4409-2: 135 psi Grove YB4400 Series

Outrigger controls YB4409-2, YB4409 and YB4409XL: Lever controls located on dash panel which operate the beams in pairs from side to side. YB4411: Two switch operation mounted on dash panel. One -three- position rocker switch to select all beams/jacks, left beams/jacks only, or right beams/ jacks only. Separate -four- way toggle switch to activate beams out/in and jacks down/up. Level bubble indicator located inside operators compartment. *Independent outrigger controls available as an option. Standard engine (Tier III) Cummins QSB 3.3 L turbo-charged diesel rated at 63,4 kW (85 bhp) at 2600 rpm. Supplied with 110 V engine block heater and air intake grid heater. *Optional engine G.M. 3.0 L EFI dual fuel (gasoline / L.P.) rated at 59,6 kW (80 bhp) at 2600 rpm. Operators control station Frame mounted, open air style control station with cab shell. Includes all crane functions, driving controls, and overhead safety glass. Other standard equipment include a durable weather resistant seat with seat belt, hourmeter, sight level bubble, and fire extinguisher. The dash panel includes engine oil pressure gauge, engine water temperature gauge, fuel gauge, transmission low oil and high temperature warning lights, low battery warning light, and brake system low pressure warning light. *Operators control station enclosed Includes the standard cab shell with the addition of front, right, and rear glass, a split (two-piece) hinged door with sliding glass. Front windshield wiper and heater and defroster is included. Fuel tank capacity 70 L (18.5 gallon) all steel construction with steel side plate to guard against side impact.


5

Specifications Electrical system

Lights

One 12V maintenance free battery, 820CCA at 0°. Jump start connections. 95 amp alternator.

Recessed mounted, includes head, tail, rear work, stop, and turn signals. Maximum speed

Drive 4 x 2 – Front axle drive with planetary hubs and limited slip differential. Steer YB4409 / XL: two-wheel, four-wheel steer YB4409-2: two-wheel, four-wheel with crab steer YB4411: two-wheel, four-wheel, and crab steer with electronic self alignment.

35,6 km/h (22 mph) Gradeability (theoretical) YB4409 / XL and YB4409-2: 57%....no load 31%.... 5443 kg (12,000 lb) load YB4411: 68%....no load 40%.... 9072 kg (20,000 lb) load Gross vehicle weight (G.V.W)

Transmission YB4409 / XL and YB4409-2: Synchromesh -fourspeeds forward and reverse with stalk mounted forward/reverse selector. YB4411: Powershift -fourspeeds forward and reverse. Stalk mounted shifter on left side of steering column.

YB4409: 6849 kg (15,100 lb) YB4409XL: 7512 kg (16,560 lb) YB4409-2: 7734 kg (17,050 lb) YB4411: 7947 kg (17,520 lb) *All weights with enclosed cab Miscellaneous standard equipment Single sheave, “Quick Reeve” style hook block.; YB4409 / XL: 8,0 t (8.5 USt) YB4409-2: 8,1 t (9 USt) YB4411: 10 t (10.5 USt) Back-up alarm

Axles Front: Carraro planetary drive/steer with internal multi-wet-disc brakes and limited slip differential. Rear: Fabricated non-drive steer with disc brakes Tires 10.00 x 15 pneumatic Brakes Hydraulic actuated internal wet-disc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light. Suspension Front: Rigid mounted to frame. Rear: Rigid mounted to frame.

6


Dimensions YB4409 1,11 m (3' 7.75") 0,99 m (3' 3")

2,01 m (6' 7.5")

1,33 m (5' 1 1.88")

1,88 m (4' 2.88")

0,60 m (1' 1 1.5")

0,08 m (3.12")

1,0 m (3' 3.5") 0,30 m (1' 0")

0,30 m (1' 0") 0,46 m (1' 6") 1,74 m (5' 8.38")

1,00 m (3' 4.5")

1,70 m (5' 7") 1,82 m (5' 1 1.88")

3,84 m (12' 7")

1,74 m (5' 8.38") 3,65 m (11' 11.75")

0,97 m (3' 2")

2,39 m (7' 10") 1,77 m (5' 9.7") 1,07 m (3' 6") On tires 0,25 m (9.5") 1,60 m (5' 3") 1,99 m (6' 6.25") 3,10 m (10' 2")

Grove YB4400 Series

1,93 m (6' 4") 2,81 m (9' 2.75")

7

Turning radius YB4409

A Radius

E Radius

D Radius

C Radius B Radius

8

A

B

C

D

E

Two-wheel steer

4496 mm (14 ft 9 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

3048 mm (10 ft 0 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Range diagram YB4409

5

0

5

10

15

20

25

30

35 40

40

60°

35

35

45°

30

30

Boom and extension length in feet

25

25

30°

20

20

15°

15

15

10

Height from the ground in feet

10

10

0 10

5

0

5

10

15

20

25

5 6' jib

3-SECTION

5

4-SECTION

0°

30

0 35

Operating radius in feet from axis of rotation

Grove YB4400 Series


9

Load chart YB4409 3-SECTION BOOM OR 4-SECTION BOOM WITH 4TH RETRACTED ON OUTRIGGERS (lb) F/R

4-SECTION BOOM WITH 4TH EXTENDED RADIUS (ft)

ON RUBBER (lb)

360°

F/R

360° MAIN BOOM

JIB

16.0

6100

4300

2150

ON OUTRIGGERS (lb) F/R

* 17,000 * 17,000 5.0 10,000 10,000 * 15,700 * 14,400 6.0 10,000 7450 * 12,400 8.0 10,800 4400 7150 3-SECTION BOOM OR 10.0 10,200 8600 2950 4700 4TH RETRACTED 4-SECTION BOOM WITH 12.0 8500 2175 7000 3400 RADIUS 14.0(ft) 7200 5400 1700 ON OUTRIGGERS (lb) 2650 ON RUBBER (lb) 16.0 1325 6100 4300 2150 360° 5000F/R 18.0 3550 360° 1775 F/R 1100 20.0 2700 *2700 * 17,000 1525 10,000 950 10,000 5.0 17,000 2600 825 22.0 2600 1350 * 15,700 * 14,400 6.0 10,000 7450 2200 675 24.5 150 1 *2200 8.0 12,400 10,800 4400 7150 26.0 10.0 2950 4700 -10,200 - 8600 28.0 12.0 2175 3400 - 8500 - 7000 30.0 14.0 1700 2650 - 7200 - 5400 31.0

1325

5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.5 26.0 28.0 30.0 31.0

MAIN BOOM

RADIUS (ft)

6100 6100 5300 4700 4400 RADIUS 4400 (ft) 4400 4400 4300 5.0 3700 6.0 3100 8.0 2700 10.0 2500 12.0 2300 14.0 2200

16.0

360°

ON RUBBER (lb) F/R

360°

JIB STRUCTURAL CAPACITIES (lb) MAIN BOOM 3-SECTION BOOM OR 4-SECTION BOOM ANGLE 4-SECTION BOOM (deg) WITH 4TH RETRACTED WITH 4TH EXTENDED

6100 6100 6100 60 6100 6100 6100 55 5300 5250 5300 4-SECTION BOOM WITH 4TH EXTENDED 50 4700 3750 4700 2450 4400 3800 45 1875 2900 ON4400 OUTRIGGERS (lb) ON RUBBER (lb) 40 1525 4400 2325 35 F/R 360° F/R 360° 1225 4100 1900 30 3150 1000 1600 6100 6100 6100 6100 25 850 2700 1375 6100 6100 6100 6100 20 2300 700 1200 5300 5300 5250 5300 15 2125 650 100 1 4700 4700 3750 4700 10 575 1900 975 4400 2450 3800 4400 475 1700 850 5 4400 4400 1875 2900 1625 425 800 0

1525 4400 2325 1225 4100 1900 1000 20.0 4300 3150 1600 850 1375 22.0 3700 2700 700 3100 2300 24.5 1200 650 2700 2125 26.0 100 1 1) The rated are the maximum 575 2500 loads 1900 975 28.0 475 850by 30.0 2300 lift capacities as 1700 determined 2200 1625 425 800 31.0 4400

* LIMIT LB WHEN 1775 3RD SECTION 5000TO 11,800 18.0RATINGS 1100IS EXTENDED 18.0ANY AMOUNT. 4400 3550 950 2700 1525 825 1350 2600 675 2200 150 1 - BY BOTH - STRUCTURAL LIMITED -

JIB

2700 20.0 2600 22.0 2200 24.5 26.0 NOTES: 28.0 - IS 30.0 JIB CAPACITY 31.0

CAPACITY CHART AND MAIN CAPACITY CHART. operating radius, boom extension and boom angle. The operating * LIMIT RATINGS TO 11,800 LB WHEN 3RD SECTION IS EXTENDED ANY AMOUNT. SHADED AREAS ARE GOVERNED BY STRUCTURAL radius is the horizontal distance STRENGTH, DO NOT RELY ON TIPPING. from a projection of the axis of SIDE rotation to the supporting surface, OPERATION OF THIS EQUIPMENT IN EXCESS OF before loading, to the center of 15° 15° RATING CHARTS AND DISREGARD 30° OF vertical hoist line or tackle with load 30° INSTRUCTIONS IS DANGEROUS applied. FRONT REAR AND VOIDS WARRANTY. SIDE 2) The rated loads shown on outriggers do not exceed 85% of actual REDUCTION CHART tipping. The rated loads shown on FROM FROM MAIN BOOM JIB rubber do not exceed 75% of actual SIDE RATINGS RATINGS tipping. These ratings are based MAIN 140 lb N/A 15° 15° BLOCK on freely suspended loads with the 30° 30° crane leveled, standing on a firm, HOOK & BALL 100 lb 100 lb FRONT REAR uniform supporting surface. JIB, STOWED 0 lb N/A Practical working loads depend on SIDE supporting surface, operating radius JIB, DEPLOYED 150 lb 0 lb and other factors affecting stability. REDUCTION CHART Hazardous surroundings, climatic RIGGING CHART FROM FROM MAIN BOOM JIB conditions, experience of personRATINGS RATINGS 1-P ART 2-PART nel and proper training must all be 0-8500 lb 0-17,000 lb MAIN BLOCK 140 lb N/A taken into account by the operator. WIRE ROPE: 1/2 inch diameter HOOK & BALL 100 lb Min. breaking strength 29,750 lb

100 lb

JIB, STOWED

0 lb

N/A

JIB, DEPLOYED

150 lb

0 lb

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered part of the load. See reduction chart.

3500 3500 3325 3325 3150 3150 JIB STRUCTURAL CAPACITIES (lb) MAIN 3000 3000 BOOM 2875 3-SECTION BOOM2875 OR 4-SECTION BOOM ANGLE 2800 2800 4-SECTION BOOM WITH 4TH EXTENDE (deg) 2700 WITH 4TH RETRACTED 2700 2600 2600 3500 3500 60 2500 2500 552400 3325 3325 2400 502325 3150 3150 2325 452250 3000 3000 2250 2875 2875 402200 2200

2800 35 2700 30 25 2600 20 2500 2400 15 10 2325 are for 4) Ratings on outriggers 2250extended and either 5outriggers fully 2200 and down. 0 fully retracted down or

Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum seed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.

RIGGING CHART 1-P ART 0-8500 lb

2-PART 0-17,000 lb

WIRE ROPE: 1/2 inch diameter Min. breaking strength 29,750 lb

10


1301286YB

2800 2700 2600 2500 2400 2325 2250 2200

Dimensions YB4409XL 1,83 m (6' 0")

1,45 m (4' 9.13")

3,76 m (12' 4") Retracted 9,21 m (30' 2.50") Extended

16,5 cm (6.5")

0,99 m (3' 3")

1,88 m (4' 2.88") 0,60 m (1' 11.5")

0,08 m (3.12")

1,0 m (3' 3.5") 0,30 m (1' 0")

0,30 m (1' 0") 0,46 m (1' 6")

1,00 m (3' 4.5")

1,70 m (5' 7")

1,74 m (5' 8.38")

1,74 m (5' 8.38")

1,82 m (5' 11.88")

3,65 m (11' 11.75")

4,76 m (15' 7.5") 0,97 m (3' 2")

2,39 m (7' 10") 1,77 m (5' 9.7") 1,07 m (3' 6") 0,25 m (9' 5") On tires 1,60 m (5' 3") 1,99 m (6' 6.25") 3,10 m (10' 2")

Grove YB4400 Series

1,93 m (6' 4") 2,81 m (9' 2.75")


11

Turning radius YB4409XL

C Radius

E Radius

D Radius B Radius

A Radius

12

A

B

C

D

E

Two-wheel steer

5131 mm (16 ft 10 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

3683 mm (12 ft 1 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)


Range diagram YB4409XL (Three-section boom) 10

5

0

5

10

36 W '-2.5 ITH " B 6'- OO 0" M JIB

40

20

30

35

40 45

40

35

.5"

BO

45˚

30

30

'-2

30

OM

30˚

25

17'

-10

.5"

BO

25

20

20 15˚

OM


25

60˚

OM

35

15

15

12'

-4"

BO

15


45

10

10 0˚

5 6' JIB

5

0

10

5

0

5

10

15

20

25

30

35

40

0


Grove YB4400 Series


13

Range diagram YB4409XL (Four-section boom) 5

0

5

10

15 4 W 5'-8" ITH B 6'- OOM 0" JIB

10

50

25

35

40

45

50

45

40

45˚

39

'-8 "

40

30

60˚

BO OM

45

20

35

'-7 30

25

21'

-5"

BO

OM

25

30

30˚

20

20 15˚ 15

12'

-4"

BO

15

10

10 0˚

5 6' JIB

5

0

10

5

0

5

10

15

20

25

30

35

40


14


45

0


OO "B

30

OM


M

35

Load chart YB4409XL YB4409XL boom YB4409XL3-section 3-section boom (Three-section boom)

3-SECTION MAIN BOOM

3-SECTION MAIN BOOM

3-SECTION MAIN BOOM ON OUTRIGGERS (lb)

Radius ON OUTRIGGERS (lb) Radius (ft) F/R 360˚ (ft) F/R 360˚ 5 5 6 6 8 8 10 10 12 12 14 16 14 18 16 20 18 22 20 24 22 26 24 27

17,000 15,700 17,000 12,400 15,700 10,200 12,400 8500 10,200 7100 8500 6000 7100 5200 6000 4450 5200 3800 4450 3300 3800 2900 3300 2750

3-SECTION MAIN BOOM W/6 FT JIB DEPLOYED 3-SECTION MAIN BOOM W/6 FT JIB DEPLOYED LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) LOADED Radius BOOM BOOM ON OUTRIGGERS (lb) ON RUBBER (lb) Radius ANGLE (ft) 360˚ F/R 360˚ ANGLE F/R (ft) (deg)

3-SECTION MAIN BOOM

Radius Radius (ft)

17,000 14,400 17,000 10,800 14,400 8500 10,800 6950 8500 5800 6950 4650 5800 3800 4650 3150 3800 2700 3150 2350 2700 2050 2350 1925

(ft)

5 65 86 108 12 10 14 12 16 14 18 16 20 18 22 20 24 22 26 24 27

ON RUBBER (lb)

ON RUBBER (lb)

F/R

F/R

10,000 9500 10,000 7325 9500 4875 7325 3550 4875 2750 3550 2150 2750 1775 2150 1450 1775 1225 1450 1025 1225 875 1025 850

360˚

360˚

10,000 8200 10,000 5125 8200 3475 5125 2550 3475 1925 2550 1450 1925 1150 1450 950 1150 800 650950 525800 475650

16.4 18 16.4 20 18 22 20 24 22 26 24 28 26 30 32 28 33.5 30

32 33.5

(deg) 3500 F/R 3500 3375 3500 3375 3225 3375 3150 3075 3225 2700 2950 3075 2350 2850 2950 2050 2625 1825 2400 2850 1650 2175 2625 1475 2000 2400 1375 2175 16.5 2000 0

60 57.5 60 53.5 57.5 49 53.5 44.5 49 39.5 44.5 34 27 39.5 16.5 34 27 0

26 26 875 525 2900 2050 8501) The rated475 27 27 2750 1925 NOTES: loads are the maximum OPERATE WITH JIB BY RADIUS WHEN MAIN lifting capacities as determined BOOM IS FULLY EXTENDED AND BY BOOM ANGLE by operating radius only. Any WHEN MAIN BOOM IS PARTIALLY EXTENDED. DO combination of boom lengths NOT EXCEED JIB CAPACITIES AT ANY PARTIALLY and angles may be used to obtain EXTENDED BOOM LENGTH. operating radius. The operating radius is the horizontal distance SHADED AREAS ARE GOVERNED BY STRUCTURAL from a projection of the axis of STRENGTH. DO NOT RELY ON TIPPING. rotation to the supporting surface, before loading, to the center of OPERATION OF THIS EQUIPMENT IN EXCESS OF vertical hoist line or tackle with load RATING CHARTS AND DISREGARD OF applied. INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads SIDE shown on rubber do not exceed 75% 15˚ 15˚ of actual tipping. These ratings are 30˚ 30˚ based on freely suspended loads REAR FRONT SIDE with the crane leveled, standing on a SIDE firm, uniform, supporting surface. 15˚ 15˚ Practical working loads depend 30˚ 30˚ REDUCTION CHART on supporting surface., operating REAR FRONT FROM FROM MAIN BOOM JIB radius, and other factors affecting RATINGS RATINGS SIDE stability. Hazardous surroundings, N/A 140 lb MAIN BLOCK climatic conditions, experience of REDUCTION CHART HOOK & BALL 100 lb 100 lb personnel, and proper training must FROM FROM MAIN BOOM JIB all be taken into account by the JIB, STOWED N/A 0 lb RATINGS RATINGS operator. JIB, DEPLOYED MAIN BLOCK

150lblb 140

HOOK & BALL RIGGING 100 lbCHART JIB, STOWED 1-PART

0 lb

0 - 8500 lb

JIB, DEPLOYED

150 lb

2000 35001775 33751450 3150 1225 27001025 2350 875 800 2050 725 1825 650 1650 600

1475 1375

F/R

360˚

650 600

1300 1150 950 800 650 525 425 350 300 250

1300 1150 2000 950 1775 800 1450 650 1225 525 1025 425 875 350 800 300 725 250

4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib. 80017680

0 lb N/A

100 lb N/A 2-PART 0 - 17,000 lb 0 lb

WIRE ROPE: 1/2 inch diameter Minimum breakingCHART strength 29,750 lb RIGGING

1-PART 0 - 8500 lb

360˚

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.

2-PART 0 - 17,000 lb

WIRE ROPE: 1/2 inch diameter Minimum breaking strength 29,750 lb

Grove YB4400 Series


15

4-SECTION MAIN BOOM W/ 4TH RETRACTED

4-SECTION MAIN BOOM W/ 4TH EXTENDED

Radius ON OUTRIGGERS (lb) ON RUBBER (lb) (ft) F/R 360° F/R 360°

Load chart

17000 17000 10000 14400 15700 9500 10800 12400 8000 8500 10200 5400 8500 6950 3800 7100 5800 2750 6000 4650 2150 5200 3800 1800 4450 3150 1500 3800 2700 1300 3300 2350 1100 29004-SECTION 2050MAIN 900 BOOM 2750 W/ 4TH 1925 825 RETRACTED

5 6 8 10 12 14 16 18 20 22 24 26 27


5 6 4900 4900 4900 8 4900 4300 4300 4250 10 4300 3800 3800 3300 12 3800 3400 3400 2600 14 3400 3100 3100 2100 16 2900 2900 18 2900 2400 1700 2900 2900 1350 20 1950 2900 2900 1050 22 1600 2650 2900 850 24 1350 2900 MAIN2300 700 26 4-SECTION BOOM 1100 2150 650 27 1000NOTES: W/2900 4TH EXTENDED 2750(lb) ON2000 600 28OUTRIGGERS 925 Radius ON RUBBER (lb) OPERATE WITH JIB BY RADIUS WHEN MAIN 1800 2450 500 30 800 (ft) IS FULLY EXTENDED (WITH 4TH SECTION 360° F/R 1600 360°700 BOOM 2200 400 32F/R OR RETRACTED) AND BY BOOM - 625 EXTENDED 5 1400 1975 325 33.5 6 - 550 ANGLE 1250 1775 250WHEN MAIN BOOM IS PARTIALLY 36 -

10000 8200 5600 3800 2700 1950 1450 1150 950 775 600 450 375


YB4409XL (Four-section boom)

5 17000 17000 10000 10000 6 15700 14400 9500 8200 4900 12400 10800 5600 4900 4900 8 8000 8 4900 EXTENDED. DO NOT EXCEED JIB CAPACITIES AT 8500 4300 4300 4250 10 10200 5400 3800 10 4300 3800 12 8500 6950 3800 2700 12 3800 3800 3300 ANY PARTIALLY EXTENDED BOOM LENGTH. 3400 7100 5800 MAIN 1950 W/ 14 2600 14 2750 BOOM 3400 4-SECTION 4TH 3400 4-SECTION MAIN BOOM W/ 4TH 3100 4650 3100 2100 16 6000 2150 1450 16 2900 RETRACTED 6 FT JIB EXTENDED W/ 6 FTAREAS JIB DEPLOYED SHADED ARE GOVERNED BY STRUCTURAL 2900 2900 1700 18 5200 3800 W/ 1800 1150DEPLOYED 18 2400 2900 20LOADED 4450 ON OUTRIGGERS 3150 1500 (lb)950 20 2900 1950 1350 LOADED STRENGTH. DO NOT RELY ON ON RUBBER (lb) ON OUTRIGGERS (lb) ON RUBBER (lb) TIPPING. Radius22 BOOM Radius 2900 BOOM 3800 2700 775 2900 1050 1300 22 1600 2350 2900 (ft) 2650 850 24 ANGLE 3300 1100 600 24 1350 (ft) 26 ANGLE 2300 700F/R OPERATION 2900 2050 900 1100 F/R 360° 450F/R 26 360°2900 360° OF THIS F/R EQUIPMENT 360° IN 2150 (deg) 27 (deg) 2750 1925 825 375 27 2900 1000 650 EXCESS OF RATING CHARTS AND 2000 600 925 3500 16.4 60 3500 2000 28 1300 2750 2900 22 60 2900 1600 1050 1800 2450 500 30 800 INSTRUCTIONS IS 3375 3375 18 57.5 1800 32 1150 2200 2900 DISREGARD 2650 OF 1350 24 57 850 1600 400 700 AND VOIDS700 WARRANTY. 3225 3150 20 53.5 1500 33.5 950 1975 2900 DANGEROUS 2300 26 54 1100 1400 325 625 1250 2502750 550 2700 49 3075 22 1300 36 800 1775 2000 50.5 600 28 925

2350 24 44.5 2950 1100 650 1800 30 47 2450 2850 2050 26 39.5 925 525 2200 1600 32 43 4-SECTION MAIN BOOM W/ 4TH 4-SECTION MAIN BOOM W/ 4TH 2625 W/ 61825 28 34 RETRACTED 800 425 1975 1400 33.5 40 FT JIB DEPLOYED EXTENDED W/ 6 FT JIB DEPLOYED 1650 27 2400 350 30 725 1250 34.5 1775 36 LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) LOADED ON OUTRIGGERS (lb) ON RUBBER (lb) 1475 32Radius16.5 2175 650 300 Radius BOOM 1150 38 29 1650 BOOM 1375 2000 33.5(ft) ANGLE 0 600 250 (ft) ANGLE 1075 1550 40 22.5 F/R 360° F/R 360° F/R 360° F/R 360° (deg) (deg) 1000 11.5 1450 42 1400 1600 950 0 43 16.4 60 2000 1300 3500 3500 22 60 2900 2900 1050 57.5 53.5 49 44.5 39.5 34 27 16.5 0

18 20 22 24 26 28 30 32 33.5

1150 950 800 650 525 425 350 300 250

1800 1500 1300 1100 925 800 725 650 600

3375 3150 2700 2350 2050 1825 1650 1475 1375

3375 3225 3075 2950 2850 2625 2400 2175 2000

SIDE 15°

15° 30°

30°

REAR

FRONT SIDE SIDE

REDUCTION CHART

15°

FROM MAIN BOOM RATINGS

30°

FRONT

MAIN BLOCK

SIDE

HOOK & BALL JIB, STOWED

MAIN BLOCK

JIB, DEPLOYED

HOOK & BALL

N/A

140 lb

REDUCTION CHART

100 lb FROM

15°

FROM 30° REARJIB RATINGS

100 lb FROM

MAIN BOOM RATINGS

JIB RATINGS

140 lb

N/A

0 lb

150 lb

100 lb

N/A 0 lb

100 lb

JIB, STOWEDRIGGING 0 lb CHART N/A JIB, DEPLOYED

150 lb

1-PART 0 - 8500 lb RIGGING CHART

0 lb

2-PART 0 - 17000 lb

1-PART 2-PART WIRE ROPE: 1/2 inch diameter 0 - 8500 lb 0 - 17000 lb Minimum breaking strength 29,750 lb WIRE ROPE: 1/2 inch diameter Minimum breaking strength 29,750 lb

16

24 26 28 30 32 33.5 36 38 40 42 43

57 54 50.5 47 43 40 34.5 29 22.5 11.5 0

2900 2900 2750 2450 2200 1975 1775 1650 1550 1450 1400

2650 2300 2000 1800 1600 1400 1250 1150 1075 1000 950

1350 1100 925 800 700 625 550 500 450 400 375

1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

850 700 600 500 400 325 250 200 150 125 100

800 700 625 550 500 450 400 375

500 400 325 250 200 150 125 100

3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.


80017732

Dimensions YB4409-2 Retracted 4,22 m & Extended 10,01 m (Retracted 13’ 10” & Extended 32’ 10”) 3,5 m (11’ 7.75”)

1,32 m (4’ 4”) 3,39 m (11’ 5.5”)

0,51 m (2’ 2”)

394 m (15.5”)

See Insert

0,46 m (1’ 6”)

0,30 m (1’ 0”)

0,30 m (1’ 0”) 1,00 m (3’ 4.5”) 1,70 m (5’ 7”) 1.74 m (5’ 8.38”)

1,74 m (5’ 8.38”)

1,74 m (5’ 11.88”) 1,70 m (5’ 6.92”)

3,65 m (11’ 11.75”) 0,98 m (3’ 2.5”)

*1,37 m (54.0”)

0° *0° boom head position can only be used with a down haul block

2,21 m (7’ 3”)

1,77 m (5’ 9.7”)

1,03 m (3’ 4.5”) 30°

1,34 m (53.0”)

Dimensions are with boom horizontal and the anti-two block bottomed.

10”

6,35 cm (2.5”)

1,60 m (5’ 3”) 1,96 m (6’ 5”)

1, 10 m (43.5”)

3,10 m (10’ 2”)

80°

1,81 m (9’ 2.75”)


Grove YB4400 Series


17

Turning radius YB4409-2

C Radius

E Radius

D Radius

B Radius

A Radius

A

B

C

D

E

Two-wheel steer

4674 mm (14 ft 4 in)

4737 mm (15 ft 6.5 in)

4636 mm (15 ft 2.5 in)

2718 mm (8 ft 11 in)

5525 mm (18 ft 1.5 in)

Four-wheel steer

4267 mm (14 ft 0 in)

3645 mm (11 ft 9.5 in)

3188 mm (10 ft 5.5 in)

1473 mm (4 ft 10 in)

3569 mm (11 ft 8.5 in)

18


Range diagram YB4409-2 6

4

2

0

2

4

6

8

10

12

14

72° 15,50 m (50' 10") boom with 3,66 m (12') to 5,49 m (18') telescopic offsettable boom extension

54 52 50

16

18

20

22

24

46

28

30

32

34

36

38

42

44

46

48

52

60°

50

55°

48

50°

46 44

45°

42 40

42 40

40°

10,10 m (32' 10") boom

38

56 54

65°

44

38

35°

36


40

70°

13,67 m (44' 10") boom with 3,66 m (12') offsettable boom extension

48

26

36

34

34

30°

7,11 m (23' 4") boom

32

32

30

30

25°

28

4,22 m (13' 10") boom

26

28 26

20°

24

24

22

22

15°

20

20

18

18

10°

16 14

16 14

12

5°

12

10

10

8

8

6

6

4

12' Jib

2 0


56

6

4

2

0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

42

18' Jib

44

46

48

4 2 0


Grove YB4400 Series


19

Load chart YB4409-2 RADIUS RADIUS (ft) (ft)

JIB JIB

MAIN MAINBOOM BOOM

5.0 5.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0 14.0 14.0 16.0 16.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 31.0 31.0 34.0 34.0 36.0 36.0 38.0 38.0 40.0 40.0 42.0 42.0 44.0 44.0 46.0 46.0 48.0 48.0

ON OUTRIGGERS (lb) ON OUTRIGGERS (lb) F/R 360° F/R 360°

BOOM BOOM ANY BOOM BOOM BOOM BOOM BOOM BOOM EXTENDED ANY EXTENDED BOOM RETRACTED RETRACTED BOOM RETRACTED EXTENDED RETRACTED EXTENDED

18,000 18,000 15,700 15,700 12,200 12,200 10,200 10,200 8400 8400

14,700 14,700 14,400 14,400 12,200 12,200 10,200 10,200 8400 8400 7200 7200 6200 6200 5400 5400 4830 4830 4000 4000 3480 3480 3020 3020 2680 2680 2270 2270 1960 1960 1770 1770 1590 1590 1420 1420 1270 1270 1200 1200 1160 1160 1110 1110

18,000 18,000 15,000 15,000 11,400 11,400 9100 9100 7600 7600

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. SIDE

SIDE 15°

15° 30°

30° 15°

15°

REAR

FRONT

30°

FRONT

REAR

SIDE

SIDE REDUCTION CHART

MAIN BLOCK

FROM FROM REDUCTION CHART MAIN JIB MAIN BOOM FROM FROM RATINGS RATINGS MAIN BOOM MAIN JIB N/A 140 lb RATINGS RATINGS

MAIN & BLOCK HOOK BALL

140lblb 100


100 0 lb lb

JIB, JIB,DEPLOYED STOWED

ON RUBBER(lb) ON RUBBER(lb) F/R 360° F/R 360°

100N/A lb

100 lb N/A

450 0 lb lb

0 lb N/A

450 lb CHART JIB, DEPLOYED RIGGING

RIGGING CHART 1-PART 0 - 10,000 lb

0 lb 2-PART 0 - 18,000 lb

1-PART 2-PART 0WIRE - 10,000 lb 9/16 in diameter0 - 18,000 lb ROPE:

Min. breaking strength 35,000 lb

30°

14,700 14,700 14,400 14,400 11,400 11,400 9100 9100 7600 7600 6500 6500 5310 5310 4340 4340 3610 3610 3030 3030 2590 2590 2250 2250 2010 2010 1740 1740 1500 1500 1350 1350 1200 1200 1050 1050 930930 880880 820820 760760

11,500 11,500 10,000 10,000 8100 8100 5480 5480 3920 3920 3040 3040 2420 2420 19701970 1640 1640 13701370 11601160 990990 830830 650650 510 510 430430 350350 280280 210 210 190 190 170 170 140 140

ANY ANY BOOM BOOM

9400 9400 7500 7500 5040 5040 3530 3530 25902590 19701970 15601560 12501250 10201020 850 850 710 710 590 590 490 490 360 360 250 250 180 180 130 130 80 80 60 60 40 40 20 20 0 0

JIB STRUCTURAL CAPACITIES (lb)

JIB STRUCTURAL CAPACITIES (lb) MAIN MAIN BOOM 18 ft JIB 12 ft JIB BOOM 18 ft JIB 12 ft JIB ANGLE ANGLE(deg) 15° 15° 30° 30° 0° 0° (deg) 15° OFFSET 15° OFFSET 30° OFFSET 30° OFFSET 0° OFFSET 0° OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET 72 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0

1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface., operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

72 7500 5100 3500 7500 5100 70 7000 4800 3400 7000 4800 65 5700 4100 3100 5700 4100 60 4500 3500 2800 4500 3500 553500 3500 3000 2550 3000 502800 2800 2300 2500 2500 452300 2300 2000 2200 2200 4020002000 1800 1900 1900 35 1775 17751675 1675 1600 301600 1600 1400 1500 1500 25 1450 1450 1400 1400 20 1350 1350 1350 1350 15 1300 1300 1300 1300 10 1275 1275 5 1225 1225 0 1200 1200

4000 3300 3750 3100 3200 2700 2800 2400 2450 2150 2150 1950 1900 1750 1700 1600 1525 1450 1400 1300 1275 1200 1175 1125 1100 1100 1050 1025 1000

3300 2300 3100 2200 2700 2000 2400 1850 2150 1700 1950 1600 1750 1500 1600 1400 1450 1350 1300 1300 1200 1125 1100

2300 2200 2000 1850 1700 1600 1500 1400 1350 1300

4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (100 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.


WIRE ROPE: 9/16 in diameter Min. breaking strength 35,000 lb

20

3500 4000 3400 3750 3100 3200 2800 2800 2550 2450 2300 2150 2000 1900 1800 1700 1600 1525 1400 1400 1275 1175 1100 1050 1025 1000


1303154YB

Dimensions YB4411 Retracted 4,22 m (13'-10") and Extended 10,01 m (32' - 10")

3,55 m (11' - 7.75")

3,49 m (11' - 5.5")

660 mm (26")

1,32 m (4' - 4.0")

394 mm (15.5")

See Inset

Main block two-part line

305 mm (12")

254 mm (10") Hook and ball one-part line

1,83 m (6' - 0")

1,77 m (5' - 9.5")

1,63 m (5' - 4.1")

940 mm (37")

2,01 m (6' - 7.0") 1,89 m (6' - 2.5")

1,64 m (5' - 4.5") 3,66 m (12' - 0")

1,14 m (3' - 9.0")

*1,37 m (54.0”)

0° *0° boom head position can only be used with a down haul block

2,21 m (7' - 3.0") 2,18 m (7' - 2.0") 1,78 m (5' - 10.0") 1,00 m (3' - 3.5")

30°

1,34 m (53.0”)


1,60 m (5' - 3.0") Track Width 1,93 m (6' - 4.0") Frame Width

1, 10 m (43.5”)

2,01 m (6' - 7.0") Max. Machine Width 2,06 m (6' - 9.0") C.L.O.R. Ret. and Down

80° Dimensions are with boom horizontal and the anti-two block bottomed.

Grove YB4400 Series

3,40 m (11' - 2.0") C.L.O.R. Ext. and Down


21

Turning radius YB4411

A E

B

C Outside turning radius

D Inside turning radius

A

B

C

D

E

Two-wheel steer

4759 mm (15 ft 7.4 in)

4482 mm (14 ft 8.4 in)

4080 mm (13 ft 4.6 in)

2556 mm (8 ft 4.6 in)

4522 mm (14 ft 10.0 in)

Four-wheel steer

3990 mm (13 ft 1.1 in)

3346 mm (10 ft 11.7 in)

2853 mm (9 ft 4.3 in)

1470 mm (4 ft 9.9 in)

3416 mm (11 ft 2.5 in)

22


Range diagram YB4411 6

4

2

0

2

4

6

8

10

12

14

16

18

20 22

24

26 28 30

32

34

36

38 40 42

44 46 48 50

50'10 WIT " BOO & 6'- H 12'-0 M " 0" S TINGJIB ER

54 52 50

56 54 52 50

48 44'1 WIT 0" BOO H 12 M '-0" JIB

48

46 44 42 40

46 44 42

72˚70˚

38

38

M

60˚

OO

36

10" B

32

34

50˚

32'-

34

36

55˚

32

45˚

30

30

40˚ M

28

OO 4" B

26 24

28

35˚

26

30˚

23'-


40 65˚

24

25˚

22 20

22 20

20˚

18

18 15˚

16

OO

M

16

0" B

14

14

10˚

12

13'-1

12

5˚

10 8

10 8

0˚

6

6

4

4

2

2

0


56

6

4

2

0

2

4

6

8

10

12

14

16

18

20 22 24

26 28

30 32

34

36 38

40 42

44

46 48 50

0


Grove YB4400 Series


23

Load chart YB4411

ON RUBBER (lb)

ON OUTRIGGERS (lb)

EXTENDED 360˚ ON OUTRIGGERS (lb) RADIUS F/R(lb) RETRACTED 360˚ ON RUBBER RETRACTED F/R (ft) EXTENDED 360˚ RADIUS F/R 360˚ RETRACTED 360˚ RETRACTED F/RBOOM BOOM BOOM ANY BOOM (ft) RETRACTED EXTENDED RETRACTED EXTENDED BOOM BOOM

BOOM

BOOM

MAIN BOOM

MAIN BOOM JIB

JIB

NOTES: JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. SIDE

15˚

15˚

SIDE

30˚

FRONT

30˚

REAR

15˚

15˚

SIDE

30˚

30˚

FRONT

REAR

REDUCTION CHART FROM FROM SIDE MAIN BOOM JIB RATINGS RATINGS

CHART 140 lb N/A MAIN BLOCK REDUCTION

FROM FROM MAIN 100 lb BOOM 100 lbs JIB RATINGS RATINGS


0 lb

N/A

JIB, DEPLOYED

450 lb

0 lb

MAIN BLOCK

HOOK & BALL

140 lb 100 lb 0 lb

1-PART JIB, DEPLOYED 0 - 10,000 lb 450 lb

N/A

100 lbs

RIGGING CHART

JIB, STOWED

N/A 2-PART 0 - 21,0000lblb

RIGGING WIRE ROPE: 9/16 inch CHART diameter Min. breaking strength 36,750 lb 1-PART 0 - 10,000 lb

2-PART 0 - 21,000 lb

WIRE ROPE: 9/16 inch diameter Min. breaking strength 36,750 lb

24

BOOM

ANY

ANY

EXTENDED13,975 RETRACTED BOOM 11,500 BOOM 21,000 EXTENDED 15,000 4.0 RETRACTED 19,625 18,000 15,000 14,700 19,62516,800 13,975 13,70011,500 11,500 21,000 4.05.0 11,500 5.06.0 18,000 9400 15,700 14,700 14,400 16,80013,400 13,700 13,40011,500 10,000 15,700 6.08.0 7800 12,200 14,400 12,200 13,400 8700 13,400 870010,000 7600 8.0 51755600 10,200 12,200 10.0 12,200 10,200 8700 6150 8700 6150 7600 6150 4550 6150 4550 5175 10.0 10,2008400 38503875 8400 12.0 10,200 4550 12.0 8400 30002875 3425 3850 14.0 8400 7100 4550 3000 2250 3425 14.0 7100 2400 2775 16.0 6000 2400 1800 2775 16.0 6000 1975 2300 18.0 5000 1975 1475 2300 18.0 5000 16501200 20.0 1825 1650 - 43004300 20.0 1825 14001000 1550 1400 22.0 3700 3700 - 1550 22.0 1200850 1275 1200 24.0 3300 3300 - 1275 24.0 29002900 - 26.0 1075 1025700 26.0 1075 1025 26002600 28.0 - 950 875 600 28.0 950 875 - 31.0 2300 2300 800 31.0 800 700 700450 - 34.0 1975 1975 650 34.0 600350 650 600 36.0 1775 500 550 275 36.0 1775 500 550 1575 38.0 450 400 200 1575 38.0 450 400 1425 40.0 350 300 125 40.0 350 200 300 - 42.0 1300 1425 250 42.0 250 150 200 - 1200 1300 44.0 200 44.0 200 150 - 1100 1200 46.0 175 46.0 175 - - 1000 1100 48.0 150 1000 48.0 150 -

360˚

MAIN BOOM

ANY ANGLE BOOM (deg)

11,500 940072 780070 560065 387560 287555 225050 45 1800 40 147535 120030 100025 85020 70015 60010 450 5 350 0 275 200 125 -

1) The rated loads are the maximum lifting capacities as determined by operating radius, boom extension and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 85% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. Retracted outrigger rated loads meet ASME B30.5-2004. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

JIB STRUCTURAL CAPACITIES (lb) MAIN JIB STRUCTURAL 18 ft JIB 12 ft JIBCAPACITIES (lb) BOOM ANGLE 18 ft JIB 12 ft JIB 30˚ 0˚ 15˚ 30˚ 0˚ 15˚ (deg) OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET

30˚ 0˚ 15˚ 30˚ 0˚ 15˚ OFFSET 3300 OFFSET3500 OFFSET4000 OFFSET OFFSET 72 OFFSET 7500 5100 750070 700065 570060 450055 350050 2800 45 2300 40 2000 1775 35 160030 1450 25 1350 20 1300 15 1275 10 1225 5 1200 0

700035004800 5100 4000 3400 3300 4800 3100 5700340041003750 3100 4100 3200 2800 2700 4500 3100 3500 3500 2800 2550 2400 350028003000 3000 2450 2300 2150 280025502500 2500 1950 2300230022002150 2000 2200 2000 1900 1750 2000 1900 1800 1900 1800 1700 1600 1775 1675 1600 1675 1600 1525 1450 15001600 1400 15001400 1400 1300 - 1200 14001450 - 14001275 - 1125 13501350 - 13501175 13001300 - 13001100 - 1100 - 1275 - 1050 - - 1225 - 1025 - - 1200 - 1000 - -

3750 2300 2200 3200 2000 2800 1850 2450 1700 2150 1600 1900 1500 1700 1400 1525 1350 1400 1300 127511751100105010251000-

3100 2700 2400 2150 1950 1750 1600 1450 1300 1200 1125 1100 -

4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (125 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 12,000 lb. The maximum deck load only is 14,000 lb. 8) Do not induce any external side loads to boom or jib.



80016879

2300 2200 2000 1850 1700 1600 1500 1400 1350 1300 -

DIN/ISO range diagram YB4409 3,0

1,5

0

1,5

3,0

4,6

6,1

7,6

9,1

10,7

12,2

12,2

60°

10,7

10,7

45°

9,1

9,1

7,6 30°

6,1

6,1

15°

4,6

4,6

3,0

Height from the ground in meters

Boom and extension length in meters

7,6

3,0

0 3,0

1,5

0

1,5

3,0

4,6

6,1

7,6

1,5 1,8 m JIB

3 SECTION

1,5

4 SECTION

0°

9,1

0 10,7

Operating radius in meters from axis of rotation

Grove YB4400 Series


25

DIN/ISO load chart YB4409 3-SECTION BOOM OR

ON RUBBER (kg)

ON OUTRIGGERS (kg) 360° F/R 1,5 F/R 1,8 7710 2,4 3,0 7120 3,7 5620 4,3 4630 4,9 3860 5,5 3270 6,1 6,7 2580 7,5 2100 7,9 1220 8,5 1180 9,1 9,4 1000

7710 7120 5620 4630 3860 3270 2580 2100 1220 1180 1000 -

360°

7710 6530 4900 3900 3000 2250 1800 1470 1220 1120 930 -

ONF/R RUBBER (kg) 360°

(m)

° 4380 360

F/R4540 4540

3260

1,5 1,8 2,41,5 3,01,8 3,72,4 4,3 3,0 4,9 5,53,7 6,14,3 6,74,9 7,5 5,5 7,9 6,1 8,5 9,16,7 9,47,5

F/R

2770 F/R 2770 2400 2770 2130 2770 20002400 2000 2130 2000 20002000 1800 2000 1540 2000 1290 2000 1190 1800 1080 970 1540 920 1290

MAIN BOOM MAIN BOOM

2770 2770 2400 2130 2000 2000 2000 1720 1310 1110 940 870 780 690 660

BOOM ON RUBBERANGLE (kg) 360° (deg)

ON RUBBER (kg)

ON OUTRIGGERS (kg) F/R 360°

7710 45403200 4380 1970 1300 6530 45402080 3260 950 4900 1970 32001520 730 1160 3900 1300 2080 570 930 3000 950 1520 770 460 2250 730 1160 670 400 340 1800 570 930 590 260 1470 460 770 480 1220 400 670 1120 340590 930 260480 1190 7,9 *LIMIT RATINGS TO 5350 kg WHEN 3RD SECTION IS EXTENDED ANY AMOUNT. 1080 8,5 970 9,1 920 9,4 JIB

1,5 1,8 2,4 3,0 3,7 4,3 4,9 5,5 6,1 6,7 7,5 7,9 8,5 9,1 9,4

ON OUTRIGGERS (kg)

(m)

4-SECTION BOOM WITH 4TH EXTENDED MAIN

RADIUS ON OUTRIGGERS (kg) (m) RADIUS

JIB

RADIUS (m)

4-SECTION BOOM WITH 4TH EXTENDED

3-SECTION BOOM 4-SECTION BOOM WITHOR 4TH RETRACTED 4-SECTION BOOM WITH 4TH RETRACTED RADIUS

360° 2770

2770 F/R

60 ° 360

2770 2400 2770 2130 2400 1660 1280 2130 1010 2000 820 2000 690 2000 590 1720 500 460 1310 410 1110 350 940 330 870 780 690 660

2770 2380 1560 2770 1080 2400 820 2130 650 1660 510 1280 420 340 1010 270 820 250 690210 590170 150 500 460 410 350 330

2770 50 45 2770 40 2380 35 1560 30 1080 25 820 20 15 650 10 510 5 420 0 340 270 250 210 170 150

2770

2770

NOTES: 1) The rated loads are the maximum JIB CAPACITY IS WHEN LIMITED BYSECTION BOTH STRUCTURAL capacities as determined *LIMIT RATINGS TO 5350 kg 3RD IS EXTENDED ANYlifting AMOUNT. CAPACITY CHART AND MAIN CAPACITY CHART. by operating radius only. Any combination of boom lengths SHADED AREAS ARE GOVERNED BY STRUCTURAL and angles may be used to obtain STRENGTH, DO NOT RELY ON TIPPING. operating radius. The operating radius is the horizontal distance OPERATION OF THIS EQUIPMENT IN EXCESS OF from a projection of the axis of RATING CHARTS AND DISREGARD OF rotation to the supporting surface, SIDE INSTRUCTIONS IS DANGEROUS AND VOIDS before loading, to the center of 15° 15° WARRANTY. vertical hoist line or tackle with load 30° 30° applied. FRONT

REAR

radius.

SIDE rotation

REDUCTION CHART

SIDE FROM vertical

15°

on

MAIN BLOCK

30°

FROM JIB RATINGS

MAIN BOOM RATINGS

FRONT HOOK & BALL

radius.

64 kg

N/A

45 kg

REAR 45 kg

exceed

JIB, STOWED

SIDE

0 kg

N/A

68 kg

0 kg

rotation

JIB, DEPLOYED

REDUCTION CHART vertical

FROM RIGGING CHART MAIN BOOM RATINGS 1-PART 0-3855 kg

MAIN BLOCK HOOK & BALL

FROM JIB RATINGS 2-PART 0-7710N/A kg

on

64 kg

WIRE45 ROPE: kg 13mm diameter

45 kg

exceed

Min. breaking strength 139,8 kN

JIB, STOWED

0 kg

N/A

JIB, DEPLOYED

68 kg

0 kg

RIGGING CHART

1-PART 0-3855 kg

15° 30°

2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of operator, and proper training must all be taken into account by the operator.

55

JIB STRUCTURAL CAPACITIES (kg)


MAIN 3-SECTION BOOM OR 4-SECTION BOOM 4-SECTION BOOMBOOM 3-SECTION OR WITHBOOM 4TH EXTENDED WITH 4TH RETRACTED ANGLE 1590 (deg)

4-SECTION BOOM 1588 WITH 4TH RETRACTED

15 10 5 0

1590 1510 1430 1360 1305 1270 1225 1180 1135 1090 1055 1020 1000

1510 60 1430 1360 55 1305 50 1270 45 1225 40 1180 35 1135 1090 30 1055 25 1020 20 1000

4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (6,9 bar). Loads on rubber may be transported at a maximum speed of 4 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 5440 kg. The maximum deck load only is 6350 kg. 8) Do not induce any external side loads to boom or jib.


2-PART 0-7710 kg

WIRE ROPE: 13mm diameter Min. breaking strength 139,8 kN

26

1508 1429 1361 1304 1270 1225 1179 1134 1089 1055 1021 998


1302492YB

4-SECTION WITH 4TH EX 1588 1508 1429 1361 1304 1270 1225 1179 1134 1089 1055 1021 998

DIN/ISO range diagram YB4409XL 3,0

1,5

0

1,5

3,0

4,6

6,1

7,6

9,1

10,7

12,2

13,7 15,2

60°

13,7

13,7

12,2

12,2

45°


10,7

10,7

30°

9,1

9,1

7,6

7,6

6,1

6,1

15°

4,6

4,6

3,0

3,0


15,2

0°

3,0

1,5

0

1,5

3,0

4,6

6,1

7,6

1,5

9,1

10,7

1,8 m JIB

4-SECTION

0

3-SECTION

1,5

12,2

13,7

0


Grove YB4400 Series


27

DIN/ISO load chart YB4409XL 3-SECTION BOOM OR 4-SECTION BOOM WITH 4TH RETRACTED

RADIUS (m)

ON OUTRIGGERS (kg)

4-SECTION BOOM WITH 4TH EXTENDED

ON RUBBER (kg)

F/R 360° 360° BOOM OR 1,5 7710 77103-SECTION 4535 4535 4-SECTION BOOM WITH 4TH RETRACTED 1,8 7120 6530 4310 3720 RADIUS 2,4 (m) 5625ON OUTRIGGERS 4900 2490 (kg) (kg)3580 ON RUBBER 3,0 4625 3855 1670 2400 ° F/R 1170 360° 3,7 3855 F/R 3150 360 1670

JIB

1,5 3220 7710 2550 7710 1200 4535 830 4535 1,8 2720 7120 1930 6530 930 4310 610 3720 2,4 2360 5625 1570 4900 770 3580 470 2490 3,0 1850 4625 1290 3855 630 2400 380 1670 3,7 1570 3855 1100 3150 540 1670 310 1170 4,3 1360 3220 950 2550 450 1200 240 830 1180 820 190 370 4,9 2720 1930 610 930 1120 770 170 340 2360 5,5 1570 470 770 1070 730 140 310 6,1 1850 1290 380 630 6,7 970 1570 650 1100 280 310 540 110 880 580 90 240 1360 7,3 950 240 450 530 60 800 220 1180 7,9 820 190 370 1120 770 8,2 170 340 1070 8,5 730 140 310 970 650 9,1 110 280 880 9,8 580 90 240 530 10,2 60 800 220 11,0 11,6 NOTES: 12,2 JIB CAPACITY IS- LIMITED-BY BOTH -STRUCTURAL 12,8 CAPACITY CHART AND MAIN CAPACITY CHART. 13,1

MAIN BOOM

1,5 1,8 2,4 3,0 3,7 4,3 4,9 5,5 6,1 6,7 7,3 7,9 8,2 8,5 9,1 9,8 10,2 11,0 11,6 12,2 12,8 13,1

JIB

MAIN BOOM

F/R

4,3 4,9 5,5 6,1 6,7 7,3 7,9 8,2 8,5 9,1 9,8 10,2 11,0 11,6 12,2 12,8 13,1

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS SIDE WARRANTY. 15°

15°

30°

30°

FRONT

REAR SIDE

15°

SIDE 15°

REDUCTION CHART

30°

FRONT


FROM REAR JIB RATINGS

SIDE

MAIN BLOCK

64 kg

HOOK & BALL

45 kg 45 kg REDUCTION CHART

JIB, STOWED

FROM 0 kgMAIN BOOM RATINGS

N/A

68 kg

0 kg

JIB, DEPLOYED MAIN BLOCK

N/A

64 kg

FROM JIB RATINGS

RIGGING CHART HOOK & BALL 45 kg

JIB, STOWED 1-PART 0-3855 kg JIB, DEPLOYED

0 kg 68 kg

N/A 45 kg

2-PART 0-7710 kg

N/A 0 kg

WIRE ROPE: 13 mm diameter

RIGGING139,8 CHART Min. breaking strength kN

1-PART 0-3855 kg

2-PART 0-7710 kg


30°

JIB STRUCTURAL CAPACITIES (kg) MAIN BOOM 3-SECTION BOOM OR ON RUBBER (kg) 4-SECTION BOOM 4-SECTION BOOM ANGLE WITH 4TH EXTENDED F/R 360° F/R 360° (deg) WITH 4TH RETRACTED 60 1590 JIB STRUCTURAL CAPACITIES 1540 4-SECTION BOOM- WITH 4TH EXTENDED (kg) 55 1405 MAIN 1510 RADIUS 50 1430 1295 2225 2225 2225 2225 BOOM 3-SECTION BOOM OR ON OUTRIGGERS (kg) ON RUBBER (kg) (m) 4-SECTION BOOM 4-SECTION BOOM ANGLE 1360 45 1180 1950 1950 1950 1880 WITH 4TH EXTENDED F/R1450 360° 40 WITH 4TH RETRACTED 1100 F/R 1725 360° 1725 (deg) 1305 1725 1270 1045 60 1590 1540 1,51540 - 1540 - 1540 - 1130 - 35 1225 1000 1,81405 - 1405 55 1510 1405 - 1270 - 900 - 30 1180 975 50 1430 1295 2,41315 2225 1315 22251040 2225 720 2225 25 1135 965 45 1360 1180 3,01315 1950 1315 1950 830 1950560 1880 20 1090 955 40 1305 1100 3,71315 1725 1315 1725 430 1725 680 1450 15 1055 930 35 1270 1045 4,31315 1540 1080 1540 560 1540 340 1130 10 1020 920 30 1225 1000 4,91315 1405 450 1405 930 900 5 1270 270 0 1000 905 860 1200 400 240 5,5 1315 25 1180 975 1315 1040 720 6,11120 1315 370 20 1135 965 1315 800 830 220 560 990 710 310 180 15 1090 955 6,7 1315 1315 680 430 7,3890 10 1055 930 1080 270 1315 630 340 560 130 540 100 790 230 7,9 5 1020 920 930 1315 270 450 0 1000 905 8,2700 860 200 1200 480 400 60 240 650 440 40 180 8,5 800 1120 370 220 610 410 20 150 9,1 990 710 310 180 570 370 10 130 9,8 890 630 130 270 540 350 120 0 10,2 540 100 790 230 11,0 700 480 60 200 11,6 650 40 180 1) The rated loads 440 are the maximum 4) Ratings on outriggers are with 12,2 610 410 20 150 lifting capacities as 12,8 570 370determined 10 outriggers fully extended. 130 by radius 13,1 operating 540 350only. Any 120 0

RADIUS ON OUTRIGGERS (kg) (m)

combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of operator, and proper training must all be taken into account by the operator.

5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (6,9 bar). Loads on rubber may be transported at a maximum speed of 4 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 5443 kg. The maximum deck load only is 6350 kg. 8) Do not induce any external side loads to boom or jib.



28


1302119YB

DIN/ISO range diagram YB4409-2 1,8

1,2

0,6

0

0,6

1,2

1,8

2,4

3,0

3,7

4,3 72°

16,5

4,9

5,5

6,1

6,7

7,3

7,9

8,5

9,1

9.8

10,4 11,0

11,6

12,2 12,8

13,4 14,0 14,6 15,2

70° 65°

15,9

15,9 60°

15,2

15,2 55°

14,6

14,6 50°

14,0

14,0

13,4

13,4 45°

12,8 12,2

12,8 12,2

40°

11,6

11,6 35°


11,0

11,0

10,4

10,4 30°

9,8

9,8

9,1

9,1 25°

8,5

8,5

7,9

7,9 20°

7,3

7,3

6,7

6,7 15°

6,1

6,1

5,5

5,5

4,9

10°

4,3

4,9 4,3

3,7

5°

3,0

3,7 3,0

2,4

0°

1,8

2,4 1,8

1,2

1,2 3,7 m JIB

0,6 0

17,1

16,5


17,1

1,8

1,2

0,6

0

0,6

1,2

1,8

2,4

3,0

3,7

4,3

4,9

5,5

6,1

6,7

7,3

7,9

8,5

9,1

9,8

10,4 11,0

11,6

12,2 12,8

5,5 m JIB

13,4 14,0 14,6 15,2

0,6 0


Grove YB4400 Series


29

DIN/ISO load chart YB4409-2 ON OUTRIGGERS (kg) F/R

RADIUS (m)

BOOM BOOM EXTENDED RETRACTED ON OUTRIGGERS (kg)

BOOM RETRACTED 1,5 RADIUS 1,8 (m) 2,4

JIB

JIB

MAIN BOOM

MAIN BOOM

3,0 3,7 1,5 4,3 1,8 4,9 2,4 5,5 3,0 6,1 3,7 6,7 4,3 7,3 4,9 5,5 7,9 6,1 8,5 6,7 9,4 7,3 10,4 7,9 11,0 8,5 11,6 9,4 12,2 10,4 12,8 11,0 13,4 11,6 14,0 12,2 14,6 12,8

460

-

-

14,0 440 NOTES: 14,6 430 JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.

SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS SIDE WARRANTY. SIDE

15° 30°

15°

15°

30°

FRONT

REAR

FRONT

15°

REAR

SIDE SIDE

REDUCTION CHART REDUCTION CHART

FROM JIB FROM RATINGS JIB

FROM MAIN BOOM FROM RATINGS MAIN BOOM

RATINGS

RATINGS

MAIN BLOCK

60 kg

HOOK & BALL

45 kg

JIB, STOWED JIB, STOWED

0 kg 0 kg

N/A N/A

JIB, DEPLOYED JIB, DEPLOYED

200 kg kg

0 kg 0 kg

MAIN BLOCK

HOOK & BALL

N/A

60 kg

N/A

45 kg

45 kg

45 kg

RIGGING CHART RIGGING CHART

1-PART

1-PART 0-4540 kg 0-4540 kg

BOOM EXTENDED

6670 8160 6670 8160 ° 6530 6530 7120 F/R 6800360 5530 5170 5530 5170 BOOM BOOM BOOM BOOM 4630 4630 4130 4130 RETRACTED EXTENDED RETRACTED EXTENDED 3810 3810 3450 3450 6670 8160 6670 8160 3270 2800 6530 6530 7120 6800 2810 2220 5530 5170 5530 5170 2450 4630 4630 4130 41301800 2010 3810 3810 34501490 3450 1670 3270 -28001250 - 1430 2810 -22201060 - 2450 -1800 910 - 1240 2010 -- 1490 810 1090 1670 -1250 690 - 920 1430 -1060 780 590 1240 910 710 530 1090 810 630 460 920 690 560 400 780 590 490 -710 - 530 350 460 630 - -460 320 440 560 - 400 300 -430 490 - -350 270

13,4

2-PART 2-PART 0-8160 kg

30°

30°


ON RUBBER (kg) 360°

320 300 1) The 270

F/R

360°

ANY

ANY

ONBOOM RUBBER (kg) BOOM

5220

F/R 4540

3670

ANY 2440 BOOM

1730

5220 1330 4540 1050 3670 2440 850 1730 700 1330 570 1050 480 850 400 700 330 570 250 480 180 400 150 330 110 250 80 180 150 50 110 40 80 30 50 20 40 30 loads rated 20

MAIN BOOM ANGLE (deg)

3,7 m JIB

5,5 m JIB

15° 30° 0° 15° 30° 0° OFFSET CAPACITIES OFFSET OFFSET OFFSET OFFSET OFFSET JIB STRUCTURAL (kg)

2310 1590 1810 1500 72 3400 4260 MAIN 3,7 m JIB 2180 JIB 360° 3360 BOOM 70 3180 1540 5,5 m 1700 1410 1860 1410 1450 1220 2590 2240 ANGLE 65 ° ° ° ° ° ° 15 30 0 15 30 0 ANY 60 1590 1270 1270 1090 2040 1550 (deg) OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET BOOM 1130

55

72 3400 4260 50 840 70 3180 3360 45 660 65 2590 2240 40 520 60 2040 1550 35 55 1590 1130 420 30 340 50 1270 840 25 45 1040 660 280 40 910 20 520 220 35 420 15810 170 30 730 340 10 120 25 280 5660 70 20 610 220 0 40 15 590 170 10 10 580 120 0 5 560 70 0 0 540 40 0 10 0 0 0 0 0 0 the maximum are 0

lifting capacities as determined by operating radius, boom extension and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel, and proper training must all be taken into account by the operator.

1590 2310 1270 2180 1040 1860 910 1590 810 1360 730 1130 660 1000 860 610 760 590 680 580 640 560 610 540 590 -

1360

1590 1130 1540 1000 1410 860 1270 760 1160 680 1040 640 910 820 610 730 590 640 --

1160

1810 1040 1700 910 1450 820 1270 730 1110 640 980 860 770690 640 580 530 500 480 460 450

5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (700 kPA). Loads on rubber may be transported at a maximum speed of 1,4 km/h on a smooth, hard level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 5440 kg. The maximum deck load only is 6350 kg. 8) Do not induce any external side loads to boom or jib.


0-8160 kg



30

980

1040 880 1000 790 910 840730 770660 730590 540 680 640510 610500 590 - -

4) Ratings on outriggers are for outriggers fully extended.



1110

1500 980 1410 860 1220 770 1090 690 980 640 880 580 790 730 530 660 500 590 480 540 460 510 450 500 -

1040 1000 910 840 770 730 680 640 610 590 -


80019958

DIN/ISO range diagram YB4411 2

1

1

0

2

16

4

5

6

7

8

9

10

11

12

13

14

15 17 16 15

13,7 mB OOM WIT H 3, 7m JIB

15 14 13

14 13

72° 70°

12

12

65° °

OOM

60

10,0

10

11

55°

mB

11

50°

10 45°

9

9

BOO

M

40° 35°

7,1 m

8

8 30°

7

7

25°

6

6

20°

M

5

BOO

4

5

15°

4,2 m


3

3

10°

4

5°

3

0°

2

2 1

1 0


3

15,5 mB OOM W & 1,8ITH 3,7 m S m JIB TING ER

17

3

2

1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

0


Grove YB4400 Series


31

DIN/ISO load chart YB4411 ON RUBBER (kg)

ON OUTRIGGERS (kg) EXTENDED 360° RETRACTED F/R

RADIUS (m)

BOOM EXTENDED

BOOM RETRACTED

BOOM RETRACTED

MAIN BOOM

8,5

-

-

1060

NOTES: 9,4 930 JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL 790 10,4 SIDE CAPACITY CHART AND MAIN CAPACITY CHART.

11,0 710 15° 620 11,6 30° AREAS ARE GOVERNED BY STRUCTURAL 30° SHADED 560 12,2 FRONT REAR STRENGTH, DO NOT RELY ON TIPPING. 12,8 510 SIDE 460 13,4 OPERATION OF THIS EQUIPMENT IN EXCESS OF REDUCTION - CHART 420 14,0 RATING CHARTS ANDFROM DISREGARD FROM OF 14,6 JIB 380 MAIN BOOM JIB

15°

RATINGS RATINGS INSTRUCTIONS IS DANGEROUS AND VOIDS MAIN BLOCK 60 kg N/A WARRANTY. HOOK & BALL JIB, STOWED

15°

JIB, DEPLOYED

45 kg

45 kg

0 kg SIDE

N/A

200 kg

30°

0 kg

REAR 1-PART 0-4540 kg

SIDE

2-PART 0-9530 kg

REDUCTION WIRE ROPE: 14CHART mm diameter Min. breaking strength 172,8 kN


FROM JIB RATINGS

MAIN BLOCK

60 kg

N/A

HOOK & BALL

45 kg

45 kg

JIB, STOWED

0 kg

N/A

JIB, DEPLOYED

200 kg

0 kg

RIGGING CHART

1-PART 0-4540 kg

15° 30°

RIGGING CHART

FRONT

2-PART 0-9530 kg

WIRE ROPE: 14 mm diameter Min. breaking strength 172,8 kN

32

BOOM EXTENDED

°

F/R

360

ANY BOOM

ANY BOOM

JIB STRUCTURAL CAPACITIES (kg) MAIN BOOM ANGLE (deg)

9530 6800 72 5220 5220 1,2 9530 6800 1,5 8160 8160 (kg) 6670 5220 4260 6670 ON RUBBER (kg) 70 ON OUTRIGGERS 4540 3540 1,8 7120 6530 6530 65 6530 ° 3670 2680 2,4 5530 3960 3960 5530 EXTENDED 360 ° ° 60 F/R 360 RETRACTED 360 RADIUS RETRACTED F/R 55 3,0 4630 2720 1810 2810 2810 4630 (m)3,7 2040 1310 2090 2090 50 3810 3810 BOOM BOOM BOOM ANY 1040 ANY 45 1570BOOM 1590 4,3 3220 EXTENDED RETRACTED EXTENDED 1270 BOOM 820 BOOM 4,9 RETRACTED 1270 40 2720 1040 5220 680 -9530 1060 6800 2270 5220 35 1,2 5,5 95306800 30 6,1 860 540 850 1790 1,5 8160 8160 6670 5220 4260 6670 6,7 730 430 720 25 1530 4540 3540 1,8 7,3 71206530 6530 6530 630 380 590 20 1360 3670 320 2680 15 2,4 7,9 55305530 540 -3960 510 3960 1190 2720 270 1810 10 3,0 8,5 46304630 480 - 2810 440 2810 1060 -2090 380 2090 930 360 2040 180 1310 5 3810 3,7 9,4 3810- 310 1570 790 270 1590 110 1040 0 3220 4,3 10,4 -11,0 270 710 230 80 1270 820 4,9 1270 2720 220 620 11,6 180 40 1040 680 5,5 12,2 1060 -2270 180 560 150 10 860 540 6,1 12,8 -1790 - 130 850 510 110 0 6,7 13,4 730 430 -1530 - 110 720 460 90 0 - 90 590 420 80 0 7,3 14,0 630 380 -1360 - 80 510 380 70 0 540 320 7,9 14,6 1190 --

JIB

MAIN BOOM

RETRACTED 360

°

440

480

270

1) The rated loads are the maximum 380 360 180 lifting capacities as determined 310 270 110 by operating radius only. Any 270 230 80 combination of boom lengths 220 180 40 and angles may be used to obtain 180 150 10 operating radius. The operating 130 110 0 radius is the horizontal distance 110 90 0 from a projection of the axis of 90 80 0 rotation to the supporting surface, 80 70 0 before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of operator, and proper training must all be taken into account by the operator.

3,7 m JIB

5,5 m JIB

15° 0° 30° 0° 15° 30° OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET

3400 2310 1590 1810 1500 1040 3180 2180 1540 JIB STRUCTURAL 1700 1410 CAPACITIES 1000 (kg) 2590 1860 1410 1450 1220 910 MAIN 2040 1590 1270 1270 1090 840 3,7 m JIB 5,5 m JIB BOOM1360 1590 1160 1110 980 770 ANGLE 1130 1270 1040 980 880 730 ° ° ° 30790 0° 15° 3 1040 680 (deg) 1000 0 910 15 860 OFFSET OFFSET OFFSET OFFSET OFFSET OF 910 860 820 770 730 640 810 72 760 3400 730 2310690 660 610 1590 1810 1500 10 730 680 640 640 590 590 70 3180 2180 1540 1700 1410 10 660 640 580 540 65 610 2590 - 1860530 1410 1450 1220 9 610 510 1590500 1270 1270 1090 8 59060 590 2040 500 1360480 11601110 980 7 58055 - 1590 56050 - 1270 1130460 1040980 880 7 54045 - 1040 1000450 910860 790 6

40 910 860 820 770 35 810 760 730 690 30 730 680 640 640 25 660 640 580 20 610 610 530 15 590 590 500 10 580 480 4) Ratings on outriggers are with 5 560 460 outriggers fully extended. 0 540 450

5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (6,9 bar). Loads on rubber may be transported at a maximum speed of 4 km/h on a smooth, hard level surface with boom retracted to the shortest length possible and centered over front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 5440 kg. The maximum deck load only is 6350 kg. 8) Do not induce any external side loads to boom or jib.



1302120YB

730 660 590 540 510 500 -

6 6 5

Symbols glossary Axles

Boom

Boom elevation

Boom extension

Boom length

Boom nose

Brakes

Cab

Counterweight

Grade

Outriggers

Drive

Heavy duty jib

Radius

Electrical system

Hoist

Rotation

Hookblock

Speed

Hydraulic system

Steering

Engine

Extension

Frame

Fuel tank capacity

Gear

H

Lights

Oil

Outrigger controls

Suspension

Swing

Tires

Transmission

Grove YB4400 Series

33

Notes

34

Notes

Grove YB4400 Series

35

Manitowoc Cranes Regional headquarters Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277

Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00

China Shanghai, China Tel: +86 21 6457 0066 Fax: +86 21 6457 4955

Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040

Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062

Regional offices Americas Brazil Alphaville Mexico Monterrey Chile Santiago Europe, Middle East, Africa Czech Republic Netvorice France Baudemont Cergy Decines Germany Langenfeld Hungary Budapest Italy Lainate Netherlands Breda Poland Warsaw Portugal Baltar Russia Moscow U.A.E. Dubai U.K. Buckingham

©2011 Manitowoc Form No.YB4400 Series PG Part No. 04-019-2M-0811

China Beijing Chengdu Guangzhou Xian Greater Asia-Pacific Australia Adelaide Brisbane Melbourne Sydney India Calcutta Chennai Delhi Hyderabad Pune Korea Seoul Philippines Makati City Singapore

Factories Brazil Alphaville China TaiAn Zhangjiagang France Charlieu Moulins Germany Wilhelmshaven India Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris USA Manitowoc Port Washington Shady Grove

This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.

www.manitowoc.com

Specs Document

Specs Document

Suggest Documents

Specs Document

Specs

Specs

Download 2011 Advertising Specs & Specs PDF - Openminds.tv

2010 specs

Download Specs

download specs

Hardware Specs

Download Specs

Get Specs

Beetle specs

tech specs

Print Specs

Technical Specs

OEM Specs

Download Specs

JMR (2011 Specs)

2009 Ranger Specs

Vacuum Advance Specs

JMR (2011 Specs)

Download Specs - Konica Minolta

jaguar technical specs

Volvo L180E Specs

Theatre Workshop Tech Specs