electrical resistance (EN 61340-4-3:2005). – electrical resistance (EN 61340-5-1:
2002). III. Test results (MΩ): Test. Value. Requirement. EN 61340-4-3:2005.
Technical sheet Footwear with plastic toe cap
Type numbers: A-S01, A-S02, A-S03, A-S04, A-S05, A-S06, A-S07, A-S08 I. Measured items: ESD footwear (sandals, shoes, boots) with plastic toe cap. These footwear do not contain any metal, so can be used during access on control-systems, and metal-detectors as well! II. Measures taken: –
electrical resistance (EN 61340-4-3:2005)
–
electrical resistance (EN 61340-5-1:2002)
III. Test results (MΩ): Test
Value
Requirement
EN 61340-4-3:2005
20,0
(1)
0,1-100(2)
EN 61340-5-1:2002
13,4(3)
0,75-35(4)
(1): Regarding value to a footwear. This correspondence to the environmental class 1, it is said, 23 °C and 50 % RH. (2): For „Electrostatic dissipative footwear” regarding the explanation EN 61340-4-3:2005 (3): Medium value of the tested shoes. (4): Reference value according to EN 61340-5-1:2002 when system footwear-ground is the main
Tel.: +36-24-517-490 Tel./Fax: +36-24-517-491 H-2316 Tököl, Aradi u. 8.
[email protected] www.auszer.hu
way of connection to ground for the employers. IV. Environmental conditions: Temperature: 23 °C (±2) Relative humidity: 50 % (±5) Resistance should be measured between the operator's hand and the metal plate, both feet should be on the plate. Before the first measuring, footwear should be worn for minimum 30 minutes.
Plastic toe cap
PLastic toe cap: –
Highly resistant to impacts of 200 Joule
–
high resilience
–
50 % lighter than steel, also lighter than aluminium
–
practically returns to its original shape after impact
–
cannot splinter or crack on impact
–
certified: DIN EN 12568, DIN EN 345-1
Electrical values of these products meet the requirements of EN 61340-5-1.
Tel.: +36-24-517-490 Tel./Fax: +36-24-517-491 H-2316 Tököl, Aradi u. 8.
[email protected] www.auszer.hu