gearbox control, automatic oscillation or with hydraulic or electric ... +44 (0)1524 264180. Email: general.enquiries@an
Titan FJH 16250 - 50000 Titan Monitor Nozzle z Adjustable from straight jet to
fog pattern
z Nominal flow 16,250 @ 7 bar to
50,000 l/min @ 16 bar
The Angus FJH fog/jet nozzle is a simple and reliable design fitted with a sliding sleeve which allows the water or foam stream to be adjusted from straight jet to partial fog pattern.
Water inlet connection 8”/10”/12” ANSI 150 RF
The FJH fog/jet nozzle is designed for fully hydraulic operation.
Operating pressure Design pressure and maximum operating pressure16 bar
Flow at 7 bar (100 psi) 16250 l/min 4300 US gal/min 18000 l/min 4750 US gal/min 23200 l/min 6100 US gal/min 26000 l/min 6900 US gal/min 30550 l/min 8100 US gal/min 32600 l/min 8600 US gal/min
ANSI 150# RF
Jet throw 104 m 340 ft 110 m 360 ft 111 m 365 ft 111 m 365 ft 111 m 365 ft 112 m 370 ft
Flow at 11.7 bar (170 psi) 21000 l/min 5550 US gal/min 23200 l/min 6100 US gal/min 30000 l/min 7900 US gal/min 33600 l/min 8900 US gal/min 39500 l/min 10400 US gal/min 42200 l/min 11150 US gal/min
Jet throw 140 m 460 ft 150 m 490 ft 165 m 540 ft 165 m 540 ft 165 m 540 ft 170 m 560 ft
26
Nozzle materials Body: SS316 stainless steel Fixings and internal parts: SS316 stainless steel
Hydraulic connections Female gland - 10mm Ø OD hydraulic pipe inlet and outlet
Titan FJH 16250 - 50000 Titan Monitor Nozzle
Length and height of nozzle jet Maximum water throw 175m + at an angle to the horizontal of 32° depending on model, operating conditions and inlet pressure. Note: The jet throw depends on a number of variables such as wind direction, type and concentration of foam in the water and the condition of the monitor water ways and nozzle.
Remote control operation The FJH nozzle is available with an internal hydraulic piston to move from straight jet to partial fog jet. The piston can be operated by external hydrauilc pressure or by using an EEXD solenoid valve to take water under pressure from the main monitor body. Alternatively a hand hydraulic pump can be used.
Titan large flow FJH nozzle flows range from 16,250 l/min at 7 bar inlet pressure to 50,000 l/min at 16 bar. Nozzles are usually manufactured to meet customer’s specific flow and pressure requirements. Optional Paint Finish Surface preparation
Solvent cleaning
Primer coat
Epoxy 30μm
Intermediate coat
Epoxy grey 40μm
Finish coat
Polyurethane 40μm Red RAL3000
Total dry film thickness 110μm
Monitors The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 50,000 l/min.
Fog/Jet Nozzles Angus fog/jet nozzles cover the range 200 to 20,000 l/min with self inducing options up to 4,000 l/min.
Cannons Angus foam cannons cover the range 800 to 15,000 l/min with a self inducing option and foam spreaders on all models.
Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control. All are suitable for use where explosive atmospheres may be present.
Most models are available with hydraulic or electric remote control options suitable for use in explosive rated areas.
Angus is a company assessed to ISO 9001:2008.
Monitors RHEMB 50
GMS 30
REMS 200
Fog/Jet Nozzles
Cannons
RHEMB 85
LMB 30 REMS 80
Specialist nozzles for dry powder are also available – refer to Angus.
GMS 45
LMB 40 REMS 300
GMS 60
GMS 200
LMB 85
GMS 80
GMS 300
INTERNATIONAL SALES Angus Fire Ltd Angus House, Haddenham Business Park, Pegasus Way, Haddenham, Aylesbury, HP17 8LB, UK Tel: +44 (0)1844 293600 • Fax: +44 (0)1844 293664
UK SALES Angus Fire Ltd Station Road, Bentham, Lancaster, LA2 7NA, UK Tel: +44 (0)1524 264000 • Fax: +44 (0)1524 264180
Email:
[email protected] • Web: www.angusfire.co.uk
Angus Fire operates a continuous programme of product development. The right is therefore reserved to modify any specification without prior notice and Angus Fire should be contacted to ensure that the current issues of all technical data sheets are used. © Angus Fire 6458/3 02.14
