Angus Fire Ltd. Station Road, Bentham, Lancaster, LA2 7NA, UK. Tel: +44 (0)1524 264000 ⢠Fax: +44 (0)1524 264180. Emai
REMS 80
REMS 200
Titan REMS200 Stainless Steel Fire Monitor Nominal flow 20,000 l/min z Simple and reliable design z Low maintenance z Most models available with lever or gearbox control z Suitable for use where explosive atmospheres may be present
The Angus REMS200 stainless steel fire monitor is designed for electrical remote control in both the horizontal and vertical planes and for remote control of a fog/jet nozzle or branch pipe spreader where fitted.
All Electric motors are provided with manual override handles to enable the monitor to be steered manually if power fails. All REMS monitors are based on a proven low maintenance design developed over 20 years
Electric motors, fitted to the monitor body, move the waterway in the horizontal and vertical planes while solenoid valves channel water pressure via hydraulic pistons to move a fog/jet nozzle or foam cannon spreader.
Monitor materials Stainless steel body to AISI 16 / SS316 Material certification to EN 10204 3.1 is available on request
Manual operation: The electric motors for the horizontal and vertical movements are fitted with hand wheels for manual operation in the event of failure of electrical power. Inlet connection Standard flange 6” ANSI 150 RF. (DIN and non standard flange options available) Outlet connection 6” ANSI 150 RF (alternative outlet connections are available to match cannon and nozzle options)
Electrical power is normally supplied from a remote control panel. A slave or secondary panel can also be sited close to the monitor.
Bearing materials
Both the Electric motors, the master and slave panels and the solenoid valves can certified for use in areas where explosive gasses may be present.
Electric motor characteristics
Hydraulic factory test pressure 24 bar
Electrical supply: 380VAC 3ph 50 Hz (alternative voltages are available on request) Power: 0.75 kW Protection: IP67 Explosive rating: EExd IIB T3 Insulation class: F Cable entry: No 2 – PG 21. No 1 - PG 13.5
Performance
Stainless steel (SS316) double ball race bearings on both axis with Viton seals rated up to 120ºC
Each integral motor and gearbox incorporates an adjustable, electrical torque limiting control and infinitely adjustable limit switching.
Operating pressure Design pressure 16 bar
Pressure loss at 20,000 l/min 1.6 bar. (For pressure losses at other flow rates refer to the pressure loss graph.) Weight 150 kg Movement 340º stop to stop rotation in the horizontal plane
477
+90º / -90º movement in the vertical 90 plane
90 6" ANSI 150# RF 140
6" ANSI 150# RF
617
-90
350
386 817
487
340 Stop to Stop
326 813
-90
340 Stop to Stop
360 Continuous
Titan REMS200 Stainless Steel Fire Monitor Nominal flow 20,000 l/min
Optional Paint Finish Surface preparation Primer coat Intermediate coat Finish coat Total dry film thickness
Solvent cleaning Epoxy 30μm Epoxy grey 40μm Polyurethane 40μm Red RAL3000 110μm
Length and height of monitor water jet FJH23300 nozzle at 11 bar monitor inlet pressure: Flow 24960 l/min Maximum jet throw at 32°, 123m Maximum jet height at 75°, 71m
1.8 1.6 1.4
ΔP bar
1.2 1.0 0.8 0.6 0.4 0.2 6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
Flow l/min
Nozzle and cannon options: Bronze bodied, electro/hydraulic controlled, fog/jet nozzles: FJH range: 15,000 to 20,000 l/min Stainless steel body and barrel hydraulically operated fog/jet nozzles: WC range: 20,000 and 25,000 l/min Stainless steel barrel aspirating foam cannons and optional foam inducing venturi FC range: 15,000 l/min All foam cannons come with the option of an electro/hydraulically operated spreader. (For technical details of nozzles and branchpipes see separate data sheets.)
Note: The jet throw depends on a number of variables such as wind direction, type and concentration of foam in the water and the condition of the monitor water ways and nozzle. For throw and height calculations at different inlet pressures and flows and for different nozzles and angles refer to the Angus interactive electronic data sheet.
Fog/Jet Nozzles
71m
Maximum throw
Foam Cannons E
G
h
123m
The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 50,000 l/min. Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control. All are suitable for use where explosive atmospheres may be present. Angus is a company assessed to ISO 9001:2008
INTERNATIONAL SALES Angus Fire Ltd Angus House, Haddenham Business Park, Pegasus Way, Haddenham, Aylesbury, HP17 8LB, UK Tel: +44 (0)1844 293600 • Fax: +44 (0)1844 293664
UK SALES Angus Fire Ltd Station Road, Bentham, Lancaster, LA2 7NA, UK Tel: +44 (0)1524 264000 • Fax: +44 (0)1524 264180
Email:
[email protected] • Web: www.angusfire.co.uk
Angus Fire operates a continuous programme of product development. The right is therefore reserved to modify any specification without prior notice and Angus Fire should be contacted to ensure that the current issues of all technical data sheets are used. © Angus Fire 6422/3 02.14