31 Aug 2008 ... BS EN ISO 3580 ............................................10, 28. BS EN 3745 . .... BS EN ISO
13918 ................................................12. BS EN 14200 .
British Standards – Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.
Building and civil engineering BS 6088 ..............................................................26 BS 6472 ................................................................8 BS 7808 ........................................................18, 28 BS 8100 ..............................................................23 BS EN 131 ............................................................8 BS EN 12602 ......................................................11 BS EN 12620 ......................................................21 BS EN 12697 ......................................................11 BS EN 13036 ......................................................11 BS EN 13755 ......................................................11 BS EN 13967 ......................................................21 BS EN 13984 ......................................................21 BS EN 14500 ......................................................12 BS EN 15037 ......................................................12 BS EN 15435 ......................................................12 BS ISO 15686 ...............................................17, 28 DD IEC/TS 61251 ..........................................18, 28
COMING IN AUTUMN The BSI Companion Guide to the Structural Eurocodes This guide will be available FREE to all purchasers of the Eurocodes and their National Annexes. It will include practical advice on how the new Eurocodes will work and their benefits to construction professionals.
For further information visit www.bsigroup.com/bip2159
Consumer products and services BS 4585 ........................................................17, 27 BS 7087 ........................................................16, 27 BS 7423 ..............................................................27 BS 7872 ..............................................................24 BS 8404 ..............................................................26 BS 8473 ..............................................................21 BS EN ISO 3093 ..................................................19 BS EN ISO 10360 ................................................19 BS EN 14164 ......................................................12 BS EN ISO 14978 ................................................19 BS EN 15338 ......................................................12 BS EN 15372 ......................................................12 BS EN 50136 ......................................................21 DD ENV ISO 14253 .............................................19 DD ENV 14164 ...................................................12 BS ISO 517 .........................................................16 BS ISO 1003 .................................................16, 27 BS ISO 2254 .......................................................25 BS ISO 3976 .......................................................16 BS ISO 5800 .......................................................20 BS ISO 6571 .................................................17, 27 BS ISO 11085 .....................................................17 BS ISO 13450 .....................................................20 BS ISO 15740 .....................................................17
4
BS ISO 15819 .....................................................17 BS ISO 17792 .....................................................17 BS ISO 20481 .....................................................17 BS ISO 21094 .....................................................17 DD ISO/TS 6733 ..................................................18 DD ISO/TS 21872 ................................................20
Electrotechnical BS 196 ................................................................26 BS 442 ................................................................25 BS 581 ................................................................25 BS 697 ................................................................25 BS 727 ................................................................27 BS 1659 ..............................................................25 BS 1745 ..............................................................26 BS 3676 ..............................................................27 BS 5467 ..............................................................21 BS 6651 ..............................................................27 BS 6724 ..............................................................21 BS 6878 ..............................................................21 BS 6910 ..............................................................27 BS 7288 ..............................................................23 BS 7315 ..............................................................19 BS 7808 ........................................................18, 28 BS 7933 ..............................................................27 BS EN 13201 ......................................................19 BS EN 50083 ................................................14, 28 BS EN 50086 ......................................................28 BS EN 50393 ................................................20, 27 BS EN 55016 ......................................................21 BS EN 60079 ......................................................20 BS EN 60254 ......................................................14 BS EN 60335 ..........................................20, 22, 28 BS EN 60456 ......................................................20 BS EN 60539 ......................................................14 BS EN 60728 ................................................14, 28 BS EN 60738 ......................................................14 BS EN 60749 ......................................................14 BS EN 60898 ......................................................20 BS EN 60915 ......................................................20 BS EN 60970 ......................................................20 BS EN 61058 ......................................................22 BS EN 61076 ......................................................22 BS EN 61386 ......................................................28 BS EN 61557 ......................................................15 BS EN 61800 ................................................15, 16 BS EN 61995 ......................................................16 BS EN 62271 ......................................................16 BS EN 62305 ................................................20, 27 BS EN 186150 ....................................................27 BS EN 186160 ....................................................27 BS EN 186170 ....................................................27 BS EN 186180 ....................................................27 BS EN 186210 ....................................................27 BS IEC 60287 ......................................................22 DD IEC/PAS 61169 ..............................................18 DD CLC/TS 50466 ...............................................18 DD IEC/TS 61251 ..........................................18, 28 DD IEC/TS 62371 ................................................18 PD CLC/TR 62125 ...............................................18
Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS
811 ................................................................22 949 ................................................................19 1726 ..............................................................22 3628 ..............................................................27 3648 ..............................................................27 5315 ..............................................................23 5892 ..............................................................21 6102 ..............................................................23 6472 ................................................................8 7517 ........................................................18, 28 8726 ..............................................................23 EN 415 ............................................................8 EN 440 ....................................................12, 28 EN ISO 636 ................................................8, 28 EN 758 ....................................................14, 28 EN 970 ..........................................................24 EN 1173 ..........................................................8 EN 1597 ..................................................14, 28 EN 1599 ..................................................10, 28 EN 1668 ....................................................8, 28 EN 1756 ........................................................21 EN 1792 ........................................................24
Prices may be subject to change.
BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS
EN 1870 ........................................................19 EN 2349 ..........................................................8 EN 2467 ..........................................................8 EN 2591 ..........................................................8 EN 3017 ..........................................................8 EN 3160 ........................................................10 EN 3359 ........................................................10 EN 3361 ........................................................10 EN 3364 ........................................................10 EN 3365 ........................................................10 EN ISO 3580 ............................................10, 28 EN 3745 ........................................................10 EN 4098 ........................................................10 EN 4165 ........................................................10 EN 4216 ........................................................10 EN 4379 ........................................................10 EN 4461 ........................................................10 EN 4463 ........................................................10 EN 4464 ........................................................10 EN 4465 ........................................................10 EN 4466 ........................................................10 EN 4467 ........................................................10 EN 4468 ........................................................10 EN 4470 ........................................................10 EN 4471 ........................................................11 EN 4472 ........................................................11 EN 4626 ........................................................11 EN 4627 ........................................................11 EN 4628 ........................................................11 EN 4629 ........................................................11 EN ISO 9692 ..................................................24 EN 10056 ......................................................24 EN 10058 ......................................................24 EN 10059 ......................................................24 EN 10060 ......................................................24 EN 10061 ......................................................24 EN 10084 ......................................................11 EN 10092 ......................................................25 EN ISO 11303 ................................................16 EN 12385 ......................................................21 EN 13298 ......................................................28 EN 13597 ......................................................29 EN ISO 13680 ................................................19 EN ISO 13703 ................................................19 EN 13779 ......................................................12 EN 13913 ......................................................29 EN ISO 13918 ................................................12 EN 14200 ......................................................29 EN ISO 14341 ..........................................12, 28 EN ISO 14744 ................................................12 EN ISO 15012 ................................................12 EN 15162 ......................................................12 EN 15163 ......................................................12 EN 15164 ......................................................12 EN 15240 ......................................................12 EN 15241 ......................................................12 EN 15242 ......................................................12 EN 15243 ......................................................12 EN 15302 ......................................................12 EN ISO 15324 ................................................16 EN 15528 ......................................................12 EN ISO 15792 ..........................................14, 28 EN ISO 16151 ................................................16 EN ISO 16701 ................................................16 EN ISO 17081 ................................................16 EN ISO 17475 ................................................16 EN ISO 17632 ..........................................14, 28 EN ISO 17864 ................................................16 EN ISO 22829 ................................................16 EN 50505 ......................................................14 EN 60861 ......................................................16 ISO 7975 .......................................................28 ISO 9129 .......................................................17 ISO 9136 .......................................................25 ISO 10998 .....................................................17 ISO 11303 .....................................................16 ISO 15324 .....................................................16 ISO 15637 .....................................................25 ISO 16151 .....................................................16 ISO 16701 .....................................................16 ISO 17081 .....................................................16 ISO 17475 .....................................................16 ISO 17615 .....................................................20 ISO 17864 .....................................................16 ISO 21244 .....................................................17 ISO 21537 .....................................................25
Update Standards Aug 2008
British Standards – Quick Reference Guide continued... BS ISO 21538 .....................................................25 BS ISO 22829 .....................................................16 BS ISO 22917 .....................................................25 BS ISO 23935 .....................................................18 BS ISO 26021 .....................................................18 BS IEC 61227 ...............................................18, 28 BS IEC 62363 ......................................................18 DD ISO/TS 22240 ................................................18 PD ISO/TR 29846 ................................................18 BS 4A 4 ..............................................................23 BS 6L 16 .............................................................23 BS 6L 17 .............................................................23 BS 5L 36 .............................................................23 BS 7L 37 .............................................................23 BS 4L 54 .............................................................23 BS 4L 56 .............................................................23 BS 4L 59 .............................................................23 BS 3L 63 .............................................................24 BS 2L 77 .............................................................24 BS L 105 .............................................................24 BS L 109 .............................................................24 BS L 110 .............................................................24 BS L 113 .............................................................24 BS L 114 .............................................................24 BS L 115 .............................................................24 BS L 117 .............................................................24 BS L 118 .............................................................24 BS L 119 .............................................................24 BS 2L 126 ...........................................................24 BS L 154 .............................................................24 BS L 155 .............................................................24 BS HC 404 ..........................................................26 BS AU 5 ..............................................................27 BS AU 205 ..........................................................28
Health and environment BS 6068 ........................................................16, 28 BS 7445 ..............................................................23 BS 7807 ..............................................................28 BS EN 471 ..........................................................21 BS EN 980 ............................................................8 BS EN 1650 ..........................................................8 BS EN ISO 6009 ..................................................19 BS EN ISO 9241 ..................................................11 BS EN ISO 9999 ..................................................19 BS EN 13506 ......................................................28 BS EN 14385 ......................................................25 BS EN ISO 14505 ................................................19 BS EN 15333 ......................................................20 BS EN 15546 ......................................................12 BS EN ISO 16000 ................................................14 BS EN ISO 17852 ..........................................16, 28 BS EN 60601 ................................................14, 20 BS ISO 7176 .......................................................17 BS ISO 17852 .....................................................16 DD ISO/TS 22367 ................................................18
Information systems DD 8788 .............................................................28 BS EN ISO 3166 ..................................................19 BS EN 13606 ......................................................11 BS EN ISO 19131 ................................................16 BS EN ISO 19137 ................................................16 BS EN 61158 ................................................14, 15 DD ENV 13606 ...................................................11 BS ISO/IEC 7811 .................................................17 BS ISO/IEC TR 13335 ....................................18, 28 BS ISO/IEC 14143 ...............................................17 BS ISO/IEC 15944 ...............................................17 BS ISO/IEC 18013 ...............................................17 BS ISO 19131 .....................................................16 BS ISO 19137 .....................................................16 BS ISO 24517 .....................................................18 BS ISO/IEC 27005 .........................................18, 28 BS ISO/IEC 38500 ...............................................18
Management systems DD CEN/TS 15448 ..............................................20 DD CEN/TS 15511 ..............................................18
Materials and chemicals BS 490 ................................................................26 BS 558 and 564 ..................................................22
Update Standards Aug 2008
BS 622 ................................................................22 BS 1042 ..............................................................27 BS 1468 ..............................................................22 BS 1561 ..............................................................22 BS 1872 ..............................................................22 BS 2000 ..............................................................19 BS 2657 ..............................................................22 BS 2868 ..............................................................22 BS 3406 ..............................................................27 BS 3597 ..............................................................22 BS 3900 ..............................................................22 BS 4098 ..............................................................22 BS 4223 ..............................................................22 BS 4290 ..............................................................22 BS 4292 ..............................................................22 BS 4443 ..............................................................20 BS 4493 ..............................................................22 BS 4601 ..............................................................27 BS 4641 ..............................................................27 BS 4682 ........................................................22, 23 BS 4758 ..............................................................27 BS 4790 ..............................................................23 BS 4805 ..............................................................23 BS 5229 ..............................................................23 BS 5287 ..............................................................23 BS 5325 ..............................................................23 BS 5350 ..............................................................23 BS 5658 ..............................................................23 BS 5920 ..............................................................23 BS 5921 ..............................................................23 BS 6137 ..............................................................23 BS 6654 ..............................................................23 BS 6728 ..............................................................27 BS 7078 ..............................................................23 BS 7825 ..............................................................26 BS 8407 ..............................................................23 BS EN ISO 284 ....................................................24 BS EN 285 ..........................................................21 BS EN ISO 291 ......................................................8 BS EN 923 ..........................................................21 BS EN 1470 ..........................................................8 BS EN 1811 ........................................................21 BS EN ISO 5163 ..................................................19 BS EN ISO 9073 ..................................................11 BS EN ISO 9856 ..................................................24 BS EN ISO 12947 ................................................19 BS EN 13827 ......................................................25 BS EN 15012 ......................................................12 BS EN ISO 15883 ................................................14 BS EN ISO 17132 ................................................14 BS ISO 37 ...........................................................20 BS ISO 125 .........................................................25 BS ISO 126 .........................................................25 BS ISO 1629 .......................................................22 BS ISO 2302 .......................................................25 BS ISO 3899 .......................................................25 BS ISO 4659 .......................................................25 BS ISO 5794 .......................................................25 BS ISO 7663 .......................................................25 BS ISO/TR 9464 ......................................18, 20, 27 BS ISO 12637 .....................................................17 BS ISO 15930 .....................................................17 BS ISO 17484 .....................................................20 BS ISO 18283 .....................................................20 BS ISO 21870 .....................................................25 BS ISO 22412 .....................................................17 BS ISO 23499 .....................................................17 BS ISO 24698 .....................................................18 PD ISO/TR 9464 ..................................................18 PD ISO/TR 11330 ................................................18
Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS
196 ................................................................26 442 ................................................................25 490 ................................................................26 558 and 564 ..................................................22 581 ................................................................25 622 ................................................................22 697 ................................................................25 727 ................................................................27 811 ................................................................22 949 ................................................................19 1042 ..............................................................27 1468 ..............................................................22
Prices may be subject to change.
BS 1561 ..............................................................22 BS 1659 ..............................................................25 BS 1726 ..............................................................22 BS 1745 ..............................................................26 BS 1872 ..............................................................22 BS 2000 ..............................................................19 BS 2657 ..............................................................22 BS 2868 ..............................................................22 BS 3406 ..............................................................27 BS 3597 ..............................................................22 BS 3628 ..............................................................27 BS 3648 ..............................................................27 BS 3676 ..............................................................27 BS 3900 ..............................................................22 BS 4098 ..............................................................22 BS 4223 ..............................................................22 BS 4290 ..............................................................22 BS 4292 ..............................................................22 BS 4443 ..............................................................20 BS 4493 ..............................................................22 BS 4585 ........................................................17, 27 BS 4601 ..............................................................27 BS 4641 ..............................................................27 BS 4682 ........................................................22, 23 BS 4758 ..............................................................27 BS 4790 ..............................................................23 BS 4805 ..............................................................23 BS 5229 ..............................................................23 BS 5287 ..............................................................23 BS 5315 ..............................................................23 BS 5325 ..............................................................23 BS 5350 ..............................................................23 BS 5467 ..............................................................21 BS 5658 ..............................................................23 BS 5892 ..............................................................21 BS 5920 ..............................................................23 BS 5921 ..............................................................23 BS 6068 ........................................................16, 28 BS 6088 ..............................................................26 BS 6100 ................................................................8 BS 6102 ..............................................................23 BS 6137 ..............................................................23 BS 6472 ................................................................8 BS 6651 ..............................................................27 BS 6654 ..............................................................23 BS 6724 ..............................................................21 BS 6728 ..............................................................27 BS 6878 ..............................................................21 BS 6910 ..............................................................27 BS 7078 ..............................................................23 BS 7087 ........................................................16, 27 BS 7288 ..............................................................23 BS 7315 ..............................................................19 BS 7423 ..............................................................27 BS 7445 ..............................................................23 BS 7517 ........................................................18, 28 BS 7807 ..............................................................28 BS 7808 ........................................................18, 28 BS 7825 ..............................................................26 BS 7872 ..............................................................24 BS 7933 ..............................................................27 BS 8100 ..............................................................23 BS 8404 ..............................................................26 BS 8407 ..............................................................23 BS 8473 ..............................................................21 BS 8726 ..............................................................23 BIP 0020 .............................................................19 BIP 2003 .............................................................28 BIP 2048 .............................................................28 DD CEN/TS 15448 ..............................................20 DD CEN/TS 15511 ..............................................18 DD 8788 .............................................................28 BS EN 131 ............................................................8 BS EN ISO 284 ....................................................24 BS EN 285 ..........................................................21 BS EN ISO 291 ......................................................8 BS EN 415 ............................................................8 BS EN 440 ....................................................12, 28 BS EN 471 ..........................................................21 BS EN ISO 636 ................................................8, 28 BS EN 758 ....................................................14, 28 BS EN 923 ..........................................................21 BS EN 970 ..........................................................24 BS EN 980 ............................................................8 BS EN 1173 ..........................................................8 BS EN 1470 ..........................................................8
5
Alpha-numeric sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS
6
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
1597 ..................................................14, 28 1599 ..................................................10, 28 1650 ..........................................................8 1668 ....................................................8, 28 1756 ........................................................21 1792 ........................................................24 1811 ........................................................21 1870 ........................................................19 2349 ..........................................................8 2467 ..........................................................8 2591 ..........................................................8 3017 ..........................................................8 ISO 3093 ..................................................19 3160 ........................................................10 ISO 3166 ..................................................19 3359 ........................................................10 3361 ........................................................10 3364 ........................................................10 3365 ........................................................10 ISO 3580 ............................................10, 28 3745 ........................................................10 4098 ........................................................10 4165 ........................................................10 4216 ........................................................10 4379 ........................................................10 4461 ........................................................10 4463 ........................................................10 4464 ........................................................10 4465 ........................................................10 4466 ........................................................10 4467 ........................................................10 4468 ........................................................10 4470 ........................................................10 4471 ........................................................11 4472 ........................................................11 4626 ........................................................11 4627 ........................................................11 4628 ........................................................11 4629 ........................................................11 ISO 5163 ..................................................19 ISO 6009 ..................................................19 ISO 9073 ..................................................11 ISO 9241 ..................................................11 ISO 9692 ..................................................24 ISO 9856 ..................................................24 ISO 9999 ..................................................19 10056 ......................................................24 10058 ......................................................24 10059 ......................................................24 10060 ......................................................24 10061 ......................................................24 10084 ......................................................11 10092 ......................................................25 ISO 10360 ................................................19 ISO 11303 ................................................16 12385 ......................................................21 12602 ......................................................11 12620 ......................................................21 12697 ......................................................11 ISO 12947 ................................................19 13036 ......................................................11 13201 ......................................................19 13298 ......................................................28 13506 ......................................................28 13597 ......................................................29 13606 ......................................................11 ISO 13680 ................................................19 ISO 13703 ................................................19 13755 ......................................................11 13779 ......................................................12 13827 ......................................................25 13913 ......................................................29 ISO 13918 ................................................12 13967 ......................................................21 13984 ......................................................21 14164 ......................................................12 14200 ......................................................29 ISO 14341 ..........................................12, 28 14385 ......................................................25 14500 ......................................................12 ISO 14505 ................................................19 ISO 14744 ................................................12 ISO 14978 ................................................19 15012 ......................................................12 ISO 15012 ................................................12 15037 ......................................................12
BS EN 15162 ......................................................12 BS EN 15163 ......................................................12 BS EN 15164 ......................................................12 BS EN 15240 ......................................................12 BS EN 15241 ......................................................12 BS EN 15242 ......................................................12 BS EN 15243 ......................................................12 BS EN 15302 ......................................................12 BS EN ISO 15324 ................................................16 BS EN 15333 ......................................................20 BS EN 15338 ......................................................12 BS EN 15372 ......................................................12 BS EN 15435 ......................................................12 BS EN 15528 ......................................................12 BS EN 15546 ......................................................12 BS EN ISO 15792 ..........................................14, 28 BS EN ISO 15883 ................................................14 BS EN ISO 16000 ................................................14 BS EN ISO 16151 ................................................16 BS EN ISO 16701 ................................................16 BS EN ISO 17081 ................................................16 BS EN ISO 17132 ................................................14 BS EN ISO 17475 ................................................16 BS EN ISO 17632 ..........................................14, 28 BS EN ISO 17852 ..........................................16, 28 BS EN ISO 17864 ................................................16 BS EN ISO 19131 ................................................16 BS EN ISO 19137 ................................................16 BS EN ISO 22829 ................................................16 BS EN 50083 ................................................14, 28 BS EN 50086 ......................................................28 BS EN 50136 ......................................................21 BS EN 50393 ................................................20, 27 BS EN 50505 ......................................................14 BS EN 55016 ......................................................21 BS EN 60079 ......................................................20 BS EN 60254 ......................................................14 BS EN 60335 ..........................................20, 22, 28 BS EN 60456 ......................................................20 BS EN 60539 ......................................................14 BS EN 60601 ................................................14, 20 BS EN 60728 ................................................14, 28 BS EN 60738 ......................................................14 BS EN 60749 ......................................................14 BS EN 60861 ......................................................16 BS EN 60898 ......................................................20 BS EN 60915 ......................................................20 BS EN 60970 ......................................................20 BS EN 61058 ......................................................22 BS EN 61076 ......................................................22 BS EN 61158 ................................................14, 15 BS EN 61386 ......................................................28 BS EN 61557 ......................................................15 BS EN 61800 ................................................15, 16 BS EN 61995 ......................................................16 BS EN 62271 ......................................................16 BS EN 62305 ................................................20, 27 BS EN 186150 ....................................................27 BS EN 186160 ....................................................27 BS EN 186170 ....................................................27 BS EN 186180 ....................................................27 BS EN 186210 ....................................................27 DD ENV ISO 14253 .............................................19 DD ENV 13606 ...................................................11 DD ENV 14164 ...................................................12 BS ISO 37 ...........................................................20 BS ISO 125 .........................................................25 BS ISO 126 .........................................................25 BS ISO 517 .........................................................16 BS ISO 1003 .................................................16, 27 BS ISO 1629 .......................................................22 BS ISO 2254 .......................................................25 BS ISO 2302 .......................................................25 BS ISO 3899 .......................................................25 BS ISO 3976 .......................................................16 BS ISO 4659 .......................................................25 BS ISO 5794 .......................................................25 BS ISO 5800 .......................................................20 BS ISO 6571 .................................................17, 27 BS ISO 7176 .......................................................17 BS ISO 7663 .......................................................25 BS ISO/IEC 7811 .................................................17 BS ISO 7975 .......................................................28 BS ISO 9129 .......................................................17 BS ISO 9136 .......................................................25 BS ISO/TR 9464 ......................................18, 20, 27
Prices may be subject to change.
BS ISO 10998 .....................................................17 BS ISO 11085 .....................................................17 BS ISO 11303 .....................................................16 BS ISO 12637 .....................................................17 BS ISO/IEC TR 13335 ....................................18, 28 BS ISO 13450 .....................................................20 BS ISO/IEC 14143 ...............................................17 BS ISO 15324 .....................................................16 BS ISO 15637 .....................................................25 BS ISO 15686 ...............................................17, 28 BS ISO 15740 .....................................................17 BS ISO 15819 .....................................................17 BS ISO 15930 .....................................................17 BS ISO/IEC 15944 ...............................................17 BS ISO 16151 .....................................................16 BS ISO 16701 .....................................................16 BS ISO 17081 .....................................................16 BS ISO 17475 .....................................................16 BS ISO 17484 .....................................................20 BS ISO 17615 .....................................................20 BS ISO 17792 .....................................................17 BS ISO 17852 .....................................................16 BS ISO 17864 .....................................................16 BS ISO/IEC 18013 ...............................................17 BS ISO 18283 .....................................................20 BS ISO 19131 .....................................................16 BS ISO 19137 .....................................................16 BS ISO 20481 .....................................................17 BS ISO 21094 .....................................................17 BS ISO 21244 .....................................................17 BS ISO 21537 .....................................................25 BS ISO 21538 .....................................................25 BS ISO 21870 .....................................................25 BS ISO 22412 .....................................................17 BS ISO 22829 .....................................................16 BS ISO 22917 .....................................................25 BS ISO 23499 .....................................................17 BS ISO 23935 .....................................................18 BS ISO 24517 .....................................................18 BS ISO 24698 .....................................................18 BS ISO 26021 .....................................................18 BS ISO/IEC 27005 .........................................18, 28 BS ISO/IEC 38500 ...............................................18 BS IEC 60287 ......................................................22 BS IEC 61227 ...............................................18, 28 BS IEC 62363 ......................................................18 DD ISO/TS 6733 ..................................................18 DD ISO/TS 21872 ................................................20 DD ISO/TS 22240 ................................................18 DD ISO/TS 22367 ................................................18 DD IEC/PAS 61169 ..............................................18 DD CLC/TS 50466 ...............................................18 DD IEC/TS 61251 ..........................................18, 28 DD IEC/TS 62371 ................................................18 PD ISO/TR 9464 ..................................................18 PD ISO/TR 11330 ................................................18 PD ISO/TR 29846 ................................................18 PD CLC/TR 62125 ...............................................18 BS 4A 4 ..............................................................23 BS 6L 16 .............................................................23 BS 6L 17 .............................................................23 BS 5L 36 .............................................................23 BS 7L 37 .............................................................23 BS 4L 54 .............................................................23 BS 4L 56 .............................................................23 BS 4L 59 .............................................................23 BS 3L 63 .............................................................24 BS 2L 77 .............................................................24 BS L 105 .............................................................24 BS L 109 .............................................................24 BS L 110 .............................................................24 BS L 113 .............................................................24 BS L 114 .............................................................24 BS L 115 .............................................................24 BS L 117 .............................................................24 BS L 118 .............................................................24 BS L 119 .............................................................24 BS 2L 126 ...........................................................24 BS L 154 .............................................................24 BS L 155 .............................................................24 BS HC 404 ..........................................................26 BS AU 5 ..............................................................27 BS AU 205 ..........................................................28 PAS 85 ................................................................19
Update Standards Aug 2008
British Standards
BRITISH STANDARDS
BS EN PUBLICATIONS
The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2).
The following are British Standard implementations of the English language versions of European Standards (ENs).
The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email:
[email protected] For this series, member pricing is applicable to BSI and Energy Institute members.
BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number.
Building and civil engineering. Vocabulary
BS 6100-4:2008
B/500
BS 6472:— Guide to evaluation of human exposure to vibration in buildings
BS 6472-1:2008 Vibration sources other than blasting supersedes BS 6472:1992 ISBN 978 0 580 53027 2 £57.00 members, £114.00 non-members
supersedes BS EN 1470:1998 ISBN 978 0 580 54611 2 £57.00 members, £114.00 non-members PRI/3
BS EN 1650:2008 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
BS EN 131:— Ladders
supersedes BS EN 1650:1998 ISBN 978 0 580 59692 6 £75.00 members, £150.00 non-members
BS EN 131-3:2007
CH/216
User instructions no current standard is superseded ISBN 978 0 580 53816 2 £57.00 members, £114.00 non-members
BS EN 2349:— Aerospace series. Requirements and test procedures for relays and contactors
B/512
BS EN ISO 291:2008 Plastics. Standard atmospheres for conditioning and testing supersedes BS EN ISO 291:2005 ISBN 978 0 580 62283 0 £40.00 members, £80.00 non-members
BS EN 2349-601:2007 Compass safety distance no current standard is superseded ISBN 978 0 580 56761 2 £32.00 members, £64.00 non-members ACE/6
PRI/21
BS EN 2467:2007 BS EN 415:— Safety of packaging machines
BS EN 415-8:2008 no current standard is superseded ISBN 978 0 580 54754 6 £85.00 members, £170.00 non-members MCE/3/3
Transport supersedes BS 6100-2.4.1:1992, BS 6100-2.4.2:1988, BS 6100-2.4.3:1992 and BS 6100-2.8:1990 ISBN 978 580 53724 0 £80.00 members, £160.00 non-members
Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
Note: The date referenced in the identifier is the date of the European standard.
Strapping machines
BS 6100:—
BS EN 1470:2008
Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm ≤ a ≤ 20 mm. 520 MPa ≤ Rm ≤ 670 MPa no current standard is superseded ISBN 978 0 580 56576 2 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 2591:— Aerospace series. Elements of electrical and optical connection. Test methods
BS EN ISO 636:2008 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
BS EN 2591-221:2007
supersedes BS EN 1668:1997 ISBN 978 0 580 59120 4 £40.00 members, £80.00 non-members
no current standard is superseded ISBN 978 0 580 56475 8 £40.00 members, £80.00 non-members
WEE/39
ACE/6
BS EN 980:2008
BS EN 2591-222:2007
Symbols for use in the labelling of medical devices supersedes BS EN 980:2003 which remains current ISBN 978 0 580 54636 5 £65.00 members, £130.00 non-members CH/210/3
Voltage standing wave ratio (VSWR)
Insertion loss (I.L.) no current standard is superseded ISBN 978 0 580 56476 5 £40.00 members, £80.00 non-members ACE/6
GME/21
BS EN 1173:2008
BS EN 3017:2008
Blast-induced vibration
Copper and copper alloys. Material condition designation
Aerospace series. Washers, facing/packing. Heat resisting steel
supersedes BS 6472:1992 ISBN 978 0 580 54383 8 £40.00 members, £80.00 non-members
supersedes BS EN 1173:1996 ISBN 978 0 580 59371 0 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 63675 2 £32.00 members, £64.00 non-members
GME/21/6
NFE/34
ACE/12
BS 6472-2:2008
8
Prices may be subject to change.
Update Standards Aug 2008
BS EN Publications continued... BS EN 3160:2007
BS EN 4098:2007
BS EN 4465:2007
Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa
Aerospace series. Steel FE-PL1507 (40CrMoV12). Remelted, hardened and tempered, forgings De ≤ 50 mm, 1250 MPa ≤ Rm ≤ 1400 MPa
no current standard is superseded ISBN 978 0 580 58055 0 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 61216 9 £32.00 members, £64.00 non-members
Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa
ACE/61/-/15
ACE/61/-/15
BS EN 3359:2007 Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm no current standard is superseded ISBN 978 0 580 61212 1 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 4165:— Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous
BS EN 4165-001:2007 Technical specification no current standard is superseded ISBN 978 0 580 53137 8 £75.00 members, £150.00 non-members ACE/6
no current standard is superseded ISBN 978 0 580 63436 9 £32.00 members, £64.00 non-members ACE/61/-/15
Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
Aerospace series. Steel FE-CM3801 (GX5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa no current standard is superseded ISBN 978 0 580 63407 9 £32.00 members, £64.00 non-members
BS EN 4379:2007 Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated, forging De ≤ 200 mm
no current standard is superseded ISBN 978 0 580 63437 6 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 61222 0 £32.00 members, £64.00 non-members
ACE/61/-/15
ACE/61/-/48
BS EN 3365:2007 Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D ≤ 300 mm no current standard is superseded ISBN 978 0 580 61213 8 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 4461:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa no current standard is superseded ISBN 978 0 580 61224 4 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN ISO 3580:2008 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification supersedes BS EN 1599:1997 ISBN 978 0 580 59118 1 £57.00 members, £114.00 non-members WEE/39
BS EN 4463:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa no current standard is superseded ISBN 978 0 580 61226 8 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 3745:— Aerospace series. Fibres and cables, optical, aircraft use. Test methods
General no current standard is superseded ISBN 978 0 580 60566 6 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 61227 5 £32.00 members, £64.00 non-members
ACE/6
ACE/61/-/15
10
Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa no current standard is superseded ISBN 978 0 580 61229 9 £32.00 members, £64.00 non-members
BS EN 4467:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa no current standard is superseded ISBN 978 0 580 61230 5 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 4468:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa no current standard is superseded ISBN 978 0 580 61231 2 £32.00 members, £64.00 non-members ACE/61/-/15
BS EN 4470:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≤ 1200 MPa no current standard is superseded ISBN 978 0 580 61233 6 £32.00 members, £64.00 non-members ACE/61/-/15
Please do not send confirmation
BS EN 4464:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa
BS EN 3745-100:2008
BS EN 4466:2007
BS EN 4216:2007
ACE/61/-/15
BS EN 3364:2007
ACE/61/-/15
ACE/61/-/15
BS EN 3361:2007 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa
no current standard is superseded ISBN 978 0 580 61228 2 £32.00 members, £64.00 non-members
Prices may be subject to change.
of orders placed by telephone as it can lead to duplication
Update Standards Aug 2008
BS EN 4471:2007
BS EN 4628:2007
BS EN 12602:2008
Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa
Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De ≤ 150 mm. 1100 MPa ≤ Rm ≤ 1300 MPa
Prefabricated reinforced components of autoclaved aerated concrete
no current standard is superseded ISBN 978 0 580 61234 3 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 56543 4 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 53916 9 £108.00 members, £216.00 non-members B/523
ACE/61/-/15
ACE/61/-/15
BS EN 12697:— BS EN 4472:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa no current standard is superseded ISBN 978 0 580 61235 0 £32.00 members, £64.00 non-members
BS EN 4629:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forging stock. De ≤ 300 mm no current standard is superseded ISBN 978 0 580 56544 1 £32.00 members, £64.00 non-members ACE/61/-/15
ACE/61/-/15
BS EN ISO 9073:— BS EN 4626:— Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts
BS EN 4626-002:2008 Specification of performance and contact arrangements no current standard is superseded ISBN 978 0 580 60587 1 £32.00 members, £64.00 non-members ACE/6
Textiles. Test methods for nonwovens
BS EN ISO 9073-15:2008 Determination of air permeability no current standard is superseded ISBN 978 0 580 56794 0 £32.00 members, £64.00 non-members TCI/24
Bituminous mixtures. Test methods for hot mix asphalt
BS EN 12697-12:2008 Determination of the water sensitivity of bituminous specimens supersedes BS EN 12697-12:2003 ISBN 978 0 580 60790 5 £40.00 members, £80.00 non-members B/510/1
BS EN 13036:— Road and airfield surface characteristics. Test methods
BS EN 13036-6:2008
BS EN ISO 9073-17:2008 Determination of water penetration (spray impact)
Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges no current standard is superseded ISBN 978 0 580 56378 2 £40.00 members, £80.00 non-members
BS EN 4626-003:2008
no current standard is superseded ISBN 978 0 580 56796 4 £32.00 members, £64.00 non-members
Adaptor for plug
TCI/24
no current standard is superseded ISBN 978 0 580 60588 8 £32.00 members, £64.00 non-members
BS EN ISO 9073-18:2008
Determination of transverse unevenness indices
Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
no current standard is superseded ISBN 978 0 580 56380 5 £57.00 members, £114.00 non-members
ACE/6
BS EN 4626-004:2008 Adaptor for receptacle no current standard is superseded ISBN 978 0 580 60589 5 £32.00 members, £64.00 non-members ACE/6
B/510/5
BS EN 13036-8:2008
no current standard is superseded ISBN 978 0 580 56797 1 £32.00 members, £64.00 non-members
B/510/5
TCI/24
BS EN 13606:— BS EN ISO 9241:—
Health informatics. Electronic health record communication
Ergonomics of human-system interaction
BS EN 4626-101:2008 Optical contact (sub-assembly) for plug. Product standard no current standard is superseded ISBN 978 0 580 60590 1 £32.00 members, £64.00 non-members ACE/6
BS EN ISO 9241-151:2008 Guidance on World Wide Web user interfaces no current standard is superseded ISBN 978 0 580 53858 2 £80.00 members, £160.00 non-members
BS EN 13606-3:2008 Reference archetypes and term lists supersedes DD ENV 13606-3:2000 ISBN 978 0 580 57889 2 £75.00 members, £150.00 non-members IST/35
PH/9
BS EN 4627:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De ≤ 150 mm. 1100 MPa ≤ Rm ≤ 1300 MPa
BS EN 10084:2008
BS EN 13755:2008
Case hardening steels. Technical delivery conditions
Natural stone test methods. Determination of water absorption at atmospheric pressure
no current standard is superseded ISBN 978 0 580 56542 7 £32.00 members, £64.00 non-members
supersedes BS EN 10084:1998 ISBN 978 0 580 56375 1 £65.00 members, £130.00 non-members
supersedes BS EN 13755:2002 ISBN 978 0 580 58537 1 £32.00 members, £64.00 non-members
ACE/61/-/15
ISE/31
B/545
Update Standards Aug 2008
Prices may be subject to change.
11
BS EN Publications continued... BS EN 13779:2007
BS EN 15012:2007
BS EN 15242:2007
Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints
Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration
supersedes BS EN 13779:2004 ISBN 978 0 580 55019 5 £85.00 members, £170.00 non-members RHE/2
no current standard is superseded ISBN 978 0 580 54577 1 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 55014 0 £80.00 members, £160.00 non-members RHE/2
PRI/88/1
BS EN 15243:2007
BS EN ISO 13918:2008 Welding. Studs and ceramic ferrules for arc stud welding supersedes BS EN ISO 13918:1998 ISBN 978 0 580 55180 2 £65.00 members, £130.00 non-members WEE/-/1
BS EN 15037:— Precast concrete products. Beam-and-block floor systems
BS EN 15037-1:2008 Beams
BS EN 14164:2008 Foodstuffs. Determination of vitamin B6 by HPLC supersedes DD ENV 14164:2002 ISBN 978 0 580 58610 1 £40.00 members, £80.00 non-members
no current standard is superseded ISBN 978 0 580 54648 8 £85.00 members, £170.00 non-members B/524
BS EN 15162:2008 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
BS EN ISO 14341:2008
no current standard is superseded ISBN 978 0 580 55097 3 £57.00 members, £114.00 non-members
supersedes BS EN 440:1995 ISBN 978 0 580 59121 1 £40.00 members, £80.00 non-members WEE/39
BS EN 14500:2008 Blinds and shutters. Thermal and visual comfort. Test and calculation methods no current standard is superseded ISBN 978 0 580 54050 9 £80.00 members, £160.00 non-members B/538/3
BS EN ISO 14744:—
MCE/3/15
BS EN 15338:2007 Hardware for furniture. Strength and durability of extension elements and their components no current standard is superseded ISBN 978 0 580 55829 0 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 55098 0 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 55927 3 £32.00 members, £64.00 non-members
MCE/3/15
FW/0/2
BS EN 15164:2008 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chainand belt-slotting machines
Principles and acceptance conditions
Furniture. Strength, durability and safety. Requirements for non-domestic tables
BS EN 15435:2008 Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance no current standard is superseded ISBN 978 0 580 56218 1 £75.00 members, £150.00 non-members B/524
BS EN 15528:2008 BS EN 15240:2007 Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of airconditioning systems no current standard is superseded ISBN 978 0 580 55016 4 £65.00 members, £130.00 non-members RHE/2
Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure no current standard is superseded ISBN 978 0 580 57116 9 £80.00 members, £160.00 non-members RAE/1/-/8
BS EN 15546:—
BS EN 15241:2007 BS EN ISO 15012-2:2008
RAE/1/-/8
BS EN 15372:2008
MCE/3/15
Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration
Railway applications. Method for determining the equivalent conicity
Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
BS EN ISO 14744-1:2008
BS EN ISO 15012:—
BS EN 15302:2008
FW/0/1
no current standard is superseded ISBN 978 0 580 55099 7 £57.00 members, £114.00 non-members
WEE/-/1
RHE/2
BS EN 15163:2008
Welding. Acceptance inspection of electron beam welding machines
supersedes BS EN ISO 14744-1:2001 ISBN 978 0 580 57187 9 £40.00 members, £80.00 non-members
no current standard is superseded ISBN 978 0 580 55433 9 £108.00 members, £216.00 non-members
no current standard is superseded ISBN 978 0 580 55590 9 £98.00 members, £196.00 non-members
AW/-/3
Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems
Small bore connectors for liquids and gases in healthcare applications
Determination of the minimum air volume flow rate of captor hoods and nozzles
Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in commercial buildings
BS EN 15546-1:2008
no current standard is superseded ISBN 978 0 580 53143 9 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 55015 7 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 57351 4 £57.00 members, £114.00 non-members
WEE/40
RHE/2
CH/100
12
Prices may be subject to change.
General requirements
Update Standards Aug 2008
BS EN Publications continued... BS EN ISO 15792:—
BS EN 60254:—
BS EN 60738-1-3:2008
Welding consumables. Test methods
Lead-acid traction batteries
Inrush current application. Assessment level EZ
BS EN ISO 15792-1:2008
BS EN 60254-2:2008
Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
Dimensions of cells and terminals and marking of polarity on cells
supersedes BS EN 60738-1-3:1999 ISBN 978 0 580 58311 7 £40.00 members, £80.00 non-members
supersedes BS EN 1597-1:1997 ISBN 978 0 580 59115 0 £32.00 members, £64.00 non-members
supersedes BS EN 60254-2:1997 ISBN 978 0 580 55808 5 £32.00 members, £64.00 non-members
BS EN 60738-1-4:2008
WEE/39
PEL/21
Sensing application. Assessment level EZ
BS EN ISO 15792-2:2008 Preparation of single-run and two-run technique test specimens in steel supersedes BS EN 1597-2:1997 ISBN 978 0 580 59116 7 £32.00 members, £64.00 non-members WEE/39
BS EN 60539:— Directly heated negative temperature coefficient thermistors
BS EN 60539-1:2008 Generic specification
BS EN ISO 15883:—
supersedes BS EN 60539-1:2002 ISBN 978 0 580 57373 6 £75.00 members, £150.00 non-members
Washer-disinfectors
EPL/40X
BS EN ISO 15883-4:2008
BS EN 60601:—
Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
Medical electrical equipment
no current standard is superseded ISBN 978 0 580 59065 8 £80.00 members, £160.00 non-members LBI/35
BS EN ISO 16000:— Indoor air
BS EN 60601-1-9:2008
no current standard is superseded ISBN 978 0 580 56562 5 £57.00 members, £114.00 non-members EH/2/3
BS EN ISO 17132:2007 Paints and varnishes. T-bend test no current standard is superseded ISBN 978 0 580 56827 5 £40.00 members, £80.00 non-members
supersedes BS EN 60738-1-4:1999 ISBN 978 0 580 58312 4 £40.00 members, £80.00 non-members EPL/40X
BS EN 60749:— Semiconductor devices. Mechanical and climatic test methods
BS EN 60749-38:2008 Soft error test method for semiconductor devices with memory no current standard is superseded ISBN 978 0 580 54875 8 £40.00 members, £80.00 non-members
General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally conscious design
EPL/47
no current standard is superseded ISBN 978 0 580 54461 3 £65.00 members, £130.00 non-members
Industrial communication networks. Fieldbus specifications
CH/62/1
BS EN 61158-5:—
BS EN 61158:—
Application layer service definition
BS EN ISO 16000-12:2008 Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs)
EPL/40X
BS EN 60728:— Cable networks for television signals, sound signals and interactive services
BS EN 60728-4:2008 Passive wideband equipment for coaxial cable networks supersedes BS EN 50083-4:1999 ISBN 978 0 580 56972 2 £65.00 members, £130.00 non-members EPL/100
BS EN 61158-5-2:2008 Type 2 elements supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61588 7 £108.00 members, £216.00 non-members AMT/7
BS EN 61158-5-3:2008 Type 3 elements
STI/10
Thermistors. Directly heated positive stepfunction temperature coefficient
supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61589 4 £145.00 members, £290.00 non-members
BS EN ISO 17632:2008
BS EN 60738-1:—
AMT/7
Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification supersedes BS EN 758:1997 ISBN 978 0 580 59119 8 £65.00 members, £130.00 non-members WEE/39
BS EN 50505:2008 Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes
BS EN 60738:—
Blank detail specification
BS EN 60738-1-1:2008 Current limiting application. Assessment level EZ supersedes BS EN 60738-1-1:1999 ISBN 978 0 580 58309 4 £40.00 members, £80.00 non-members EPL/40X
BS EN 61158-5-4:2008 Type 4 elements supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61590 0 £85.00 members, £170.00 non-members AMT/7
BS EN 60738-1-2:2008
BS EN 61158-5-5:2008
Heating element application. Assessment level EZ
Type 5 elements
no current standard is superseded ISBN 978 0 580 57717 8 £85.00 members, £170.00 non-members
supersedes BS EN 60738-1-2:1999 ISBN 978 0 580 58310 0 £40.00 members, £80.00 non-members
supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61591 7 £153.00 members, £306.00 non-members
WEE/29
EPL/40X
AMT/7
14
Prices may be subject to change.
Update Standards Aug 2008
BS EN 61158-5-7:2008
BS EN 61158-6-8:2008
BS EN 61158-6-17:2008
Type 7 elements
Type 8 elements
Type 17 elements
supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61592 4 £118.00 members, £236.00 non-members
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61628 0 £90.00 members, £180.00 non-members
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61638 9 £85.00 members, £170.00 non-members
AMT/7
AMT/7
AMT/7
BS EN 61158-5-8:2008 Type 8 elements supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61593 1 £85.00 members, £170.00 non-members AMT/7
BS EN 61158-6-9:2008 Type 9 elements supersedes BS EN 61156-6:2004 which remains current ISBN 978 0 580 61629 7 £90.00 members, £180.00 non-members AMT/7
BS EN 61158-6-18:2008 Type 18 elements supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61640 2 £80.00 members, £160.00 non-members AMT/7
BS EN 61158-6-19:2008
BS EN 61158-5-9:2008 Type 9 elements
BS EN 61158-6-10:2008
Type 19 elements
supersedes BS EN 61158-5:2004 which remains current ISBN 978 0 580 61594 8 £98.00 members, £196.00 non-members
Type 10 elements
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61641 9 £57.00 members, £114.00 non-members
AMT/7
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61630 3 £170.00 members, £340.00 non-members
AMT/7
AMT/7
BS EN 61158-6-20:2008
BS EN 61158-6:— Application layer protocol specification
BS EN 61158-6-11:2008 Type 11 elements
BS EN 61158-6-2:2008 Type 2 elements supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61623 5 £123.00 members, £246.00 non-members
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61631 0 £65.00 members, £130.00 non-members
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61624 2 £140.00 members, £280.00 non-members
AMT/7
BS EN 61557:— BS EN 61158-6-12:2008
Type 3 elements
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61642 6 £80.00 members, £160.00 non-members
AMT/7
AMT/7
BS EN 61158-6-3:2008
Type 20 elements
Type 12 elements supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61632 7 £103.00 members, £206.00 non-members AMT/7
AMT/7
BS EN 61158-6-13:2008
Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures
BS EN 61557-12:2008 Performance measuring and monitoring devices (PMD) no current standard is superseded ISBN 978 0 580 56285 3 £85.00 members, £170.00 non-members
BS EN 61158-6-4:2008
Type 13 elements
PEL/85
Type 4 elements
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61633 4 £80.00 members, £160.00 non-members
BS EN 61800:—
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61625 9 £65.00 members, £130.00 non-members
AMT/7
BS EN 61800-7:—
AMT/7
BS EN 61158-6-5:2008 Type 5 elements supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61626 6 £90.00 members, £180.00 non-members AMT/7
Adjustable speed electrical power drive systems
BS EN 61158-6-14:2008
Generic interface and use of profiles for power drive systems
Type 14 elements supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61634 1 £85.00 members, £170.00 non-members AMT/7
BS EN 61800-7-201:2008 Profile type 1 specification no current standard is superseded ISBN 978 0 580 56072 9 £103.00 members, £206.00 non-members PEL/22
BS EN 61158-6-7:2008
BS EN 61158-6-15:2008
Type 7 elements
Type 15 elements
BS EN 61800-7-202:2008
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61627 3 £108.00 members, £216.00 non-members
supersedes BS EN 61158-6:2004 which remains current ISBN 978 0 580 61635 8 £90.00 members, £180.00 non-members
Profile type 2 specification
AMT/7
AMT/7
Update Standards Aug 2008
no current standard is superseded ISBN 978 0 580 60076 0 £108.00 members, £216.00 non-members PEL/22
Prices may be subject to change.
15
BS EN Publications continued... BS EN 61800-7-203:2008
BS EN ISO 16701:2008
BS EN ISO 22829:2008
Profile type 3 specification no current standard is superseded ISBN 978 0 580 60077 7 £108.00 members, £216.00 non-members
Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer-rectifier units operating at 1000 Hz frequency
PEL/22
ISE/NFE/8
Implementation of European Standard EN ISO 22829 by amendment to BS ISO 22829:2007.
Implementation of European Standard EN ISO 16701 by amendment to BS ISO 16701:2003.
WEE/29
BS EN 61995:— Devices for the connection of luminaires for household and similar purposes
BS EN 60861:2008 BS EN ISO 17081:2008
BS EN 61995-1:2008 General requirements no current standard is superseded ISBN 978 0 580 54128 5 £80.00 members, £160.00 non-members
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique Implementation of European Standard EN ISO 17081 by amendment to BS ISO 17081:2004. Also incorporates Corrigendum 1.
BS EN 62271:—
BS EN 62271-205:2008 Compact switchgear assemblies for rated voltages above 52 kV no current standard is superseded ISBN 978 0 580 56281 5 £57.00 members, £114.00 non-members PEL/17/1
NCE/2
Implementation of European Standard EN 60861 by amendment to BS IEC 60861:2006.
ISE/NFE/8
PEL/23
High-voltage switchgear and controlgear
Equipment for monitoring of radionuclides in liquid effluents and surface waters
BS EN ISO 17475:2008 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements ISE/NFE/8
Implementation of European Standard EN ISO 17475 by amendment to BS ISO 17475:2005. Also incorporates Corrigendum 1.
BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.
BS ISO 517:2008 Photography. Apertures and related properties pertaining to photographic lenses. Designations and measurements
BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the ’Amendments to British Standards’ and ’Updated British Standards’ sections of this issue of Update Standards.
BS EN ISO 17852:2008 (BS 6068-2.98:2006) Water quality. Determination of mercury. Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
ISE/NFE/8
Implementation of European Standard EN ISO 11303 by amendment to BS ISO 11303:2002.
Implementation of European Standard EN ISO 17852 by amendment to BS ISO 17852:2006.
BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
ISE/NFE/8
Implementation of European Standard EN ISO 15324 by amendment to BS ISO 15324:2000.
Implementation of European Standard EN ISO 17864 by amendment to BS ISO 17864:2005.
BS EN ISO 19131:2008 Geographic information. Data product specifications
Spices. Ginger (Zingiber officinale Roscoe). Specification supersedes BS 7087-8:1996 ISBN 978 0 580 54140 7 £40.00 members, £80.00 non-members AW/7
BS ISO 3976:2006 Milk fat. Determination of peroxide value no current standard is superseded ISBN 978 0 580 54299 2 £40.00 members, £80.00 non-members AW/5
IST/36
Implementation of European Standard EN ISO 19131 by amendment to BS ISO 19131:2007.
e-mail
BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions
BS EN ISO 19137:2008
ISE/NFE/8
IST/36
Implementation of European Standard EN ISO 16151 by amendment to BS ISO 16151:2005.
Implementation of European Standard EN ISO 19137 by amendment to BS ISO 19137:2007.
16
BS ISO 1003:2008
ISE/NFE/8
BS EN ISO 15324:2008 Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
CPW/172/1
EH/3/2
BS EN ISO 11303:2008 Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion
no current standard is superseded ISBN 978 0 580 61341 8 £40.00 members, £80.00 non-members
Geographic information. Core profile of the spatial schema
Prices may be subject to change.
your order
[email protected]
Update Standards Aug 2008
BS ISO 6571:2008
BS ISO/IEC 14143:—
BS ISO 17792:2006
Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method)
Information technology. Software measurement. Functional size measurement
Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25°C
BS ISO/IEC 14143-1:2007
no current standard is superseded ISBN 978 0 580 54210 7 £40.00 members, £80.00 non-members
supersedes BS 4585-15:1985 ISBN 978 0 580 56901 2 £40.00 members, £80.00 non-members AW/7
Definition of concepts
BS ISO 7176:—
supersedes BS ISO/IEC 14143-1:1998 ISBN 978 0 580 54065 3 £32.00 members, £64.00 non-members
Wheelchairs
IST/15
AW/5
BS ISO/IEC 18013:— Information technology. Personal identification. ISO-compliant driving licence
BS ISO 7176-14:2008
BS ISO 15686:—
Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
Buildings and constructed assets. Service-life planning
supersedes BS ISO 7176-14:1997 ISBN 978 0 580 53794 3 £80.00 members, £160.00 non-members
BS ISO 15686-5:2008
Machine-readable technologies
Life cycle costing
no current standard is superseded ISBN 978 0 580 57118 3 £85.00 members, £170.00 non-members
CH/173/1
BS ISO/IEC 7811:— Identification cards. Recording technique
BS ISO/IEC 7811-6:2008 Magnetic stripe. High coercivity no current standard is superseded ISBN 978 0 580 62867 2 £65.00 members, £130.00 non-members IST/17
BS ISO/IEC 18013-2:2008
no current standard is superseded ISBN 978 0 580 54083 7 £80.00 members, £160.00 non-members
IST/17
B/500/3
BS ISO 15740:2008
BS ISO 20481:2008
Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method
supersedes BS ISO 15740:2005 ISBN 978 0 580 59154 9 £98.00 members, £196.00 non-members
no current standard is superseded ISBN 978 0 580 57553 2 £40.00 members, £80.00 non-members
CPW/42
AW/15
BS ISO 9129:2008 Motorcycles. Measurement methods for moments of inertia no current standard is superseded ISBN 978 0 580 57908 0 £57.00 members, £114.00 non-members AUE/14
BS ISO 10998:2008
BS ISO 15819:2008 Cosmetics. Analytical methods. Nitrosamines. Detection and determination of Nnitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS no current standard is superseded ISBN 978 0 580 55642 5 £40.00 members, £80.00 non-members
BS ISO 21094:2008 Optics and photonics. Telescopic systems. Specifications for night vision devices no current standard is superseded ISBN 978 0 580 55531 2 £32.00 members, £64.00 non-members CPW/172
CW/217
Agricultural tractors. Requirements for steering supersedes BS ISO 10998:1995 ISBN 978 0 580 57670 6 £57.00 members, £114.00 non-members
BS ISO 21244:2008 BS ISO 15930:— Graphic technology. Prepress digital data exchange using PDF
Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement hitch rings and attachment to tractor drawbars
BS ISO 15930-8:2008
no current standard is superseded ISBN 978 0 580 57186 2 £32.00 members, £64.00 non-members
AGE/6
BS ISO 11085:2008 Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method no current standard is superseded ISBN 978 0 580 61912 0 £57.00 members, £114.00 non-members AW/4
BS ISO 12637:—
Partial exchange of printing data using PDF 1.6 (PDF/X-5) no current standard is superseded ISBN 978 0 580 57446 7 £57.00 members, £114.00 non-members PAI/43
AGE/6
BS ISO 22412:2008 Particle size analysis. Dynamic light scattering (DLS)
BS ISO/IEC 15944:— Information technology. Business Operational View
no current standard is superseded ISBN 978 0 580 56196 2 £57.00 members, £114.00 non-members LBI/37
Graphic technology. Vocabulary
BS ISO/IEC 15944-5:2008 BS ISO 23499:2008
Postpress terms
Identification and referencing of requirements of jurisdictional domains as sources of external constraints
no current standard is superseded ISBN 978 0 580 57816 8 £32.00 members, £64.00 non-members
no current standard is superseded ISBN 978 0 580 54406 4 £123.00 members, £246.00 non-members
no current standard is superseded ISBN 978 0 580 56506 9 £40.00 members, £80.00 non-members
PAI/43
IST/40
PTI/16
BS ISO 12637-4:2008
Update Standards Aug 2008
Prices may be subject to change.
Coal. Determination of bulk density
17
BS Implementations continued... BS ISO 23935:2006
BS IEC 61227:2008
DD CEN/TS 15511:2008
Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
Nuclear power plants. Control rooms. Operator controls
Postal services. Quality of service. Information available on postal services
supersedes BS 7517:1995 ISBN 978 0 580 55528 2 £40.00 members, £80.00 non-members
no current standard is superseded ISBN 978 0 580 56951 7 £40.00 members, £80.00 non-members
NCE/8
SVS/4
BS ISO 24517:—
BS IEC 62363:2008
DD ISO/TS 22240:2008
Document management. Engineering document format using PDF
Radiation protection instrumentation. Portable photon contamination meters and monitors
Road vehicles. Vehicles safety information model (VSIM)
no current standard is superseded ISBN 978 0 580 54593 1 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 57492 4 £20.00 members, £40.00 non-members
no current standard is superseded ISBN 978 0 580 56808 4 £65.00 members, £130.00 non-members
NCE/2
AUE/7
IDT/1/2
PUBLISHED DOCUMENTS
DD ISO/TS 22367:2008
PD ISO/TR 9464:2008
no current standard is superseded ISBN 978 0 580 54506 1 £20.00 members, £40.00 non-members
no current standard is superseded ISBN 978 0 580 54464 4 £32.00 members, £64.00 non-members ACE/69
BS ISO 24517-1:2008 Use of PDF 1.6 (PDF/E-1)
BS ISO 24698:— Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR)
Guidelines for the use of ISO 5167:2003
BS ISO 24698-1:2008
supersedes BS ISO/TR 9464:1998 ISBN 978 0 580 55216 8 £85.00 members, £170.00 non-members
Combustion (Dumas) method
CPI/30/2
no current standard is superseded ISBN 978 0 580 58386 5 £32.00 members, £64.00 non-members PRI/23
BS ISO 24698-2:2008 Kjeldahl method no current standard is superseded ISBN 978 0 580 58389 6 £40.00 members, £80.00 non-members
PD ISO/TR 11330:1997 Determination of volume of water and water level in lakes and reservoirs no current standard is superseded ISBN 978 0 580 55266 3 £40.00 members, £80.00 non-members
BS ISO 26021-1:2008
AUE/4
General information and use case definitions
Information technology. Security techniques. Information security risk management supersedes BS ISO/IEC TR 13335-3:1998 and BS ISO/IEC TR 13335-4:2000 ISBN 978 0 580 54513 9 £80.00 members, £160.00 non-members
GEL/107
Radio-frequency connectors
Tyres, valves and tubes. kPa/psi equivalencies for inflation pressures no current standard is superseded ISBN 978 0 580 58308 7 £32.00 members, £64.00 non-members
BS ISO/IEC 27005:2008
no current standard is superseded ISBN 978 0 580 59096 2 £40.00 members, £80.00 non-members
DD IEC/PAS 61169:—
Road vehicles. End-of-life activation of onboard pyrotechnic devices
AUE/16
Long duration storage of electronic components. Specification for implementation
CPI/113/1
PD ISO/TR 29846:2008
no current standard is superseded ISBN 978 0 580 56887 9 £40.00 members, £80.00 non-members
CH/212
DD CLC/TS 50466:2006
PRI/23
BS ISO 26021:—
Medical laboratories. Reduction of error through risk management and continual improvement
PD CLC/TR 62125:2008
DD IEC/PAS 61169-39:2008 Sectional specification for CQM series quick lock RF connectors no current standard is superseded ISBN 978 0 580 61965 6 £32.00 members, £64.00 non-members EPL/46/2
Environmental statement specific to TC 20. Electric cables no current standard is superseded ISBN 978 0 580 55852 8 £40.00 members, £80.00 non-members GEL/20
DRAFTS FOR DEVELOPMENT
DD IEC/TS 61251:2008 Electrical insulating materials. A.C. voltage endurance evaluation. Introduction supersedes BS 7808:1995 ISBN 978 0 580 58885 3 £20.00 members, £40.00 non-members GEL/112
IST/33
DD IEC/TS 62371:2008 DD ISO/TS 6733:2006 Corporate governance of information technology
Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method
Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
no current standard is superseded ISBN 978 0 580 58381 0 £57.00 members, £114.00 non-members
no current standard is superseded ISBN 978 0 580 57807 6 £20.00 members, £40.00 non-members
no current standard is superseded ISBN 978 0 580 61281 7 £32.00 members, £64.00 non-members
IST/15
AW/5
PEL/36
BS ISO/IEC 38500:2008
18
Prices may be subject to change.
Update Standards Aug 2008
PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published.
BS EN 1870:—
BS EN ISO 12947-2:1998
Safety of woodworking machines. Circular sawing machines
Determination of specimen breakdown CORRIGENDUM 1 TCI/24
BS EN 1870-13:2007 Horizontal beam panel sawing machines CORRIGENDUM 1 MTE/23
BS EN ISO 12947-3:1998 Determination of mass loss CORRIGENDUM 1 TCI/24
BS EN ISO 3093:2007 PAS 86:2008 Professional inspection, maintenance, cleaning and restoration of textile floor coverings no current standard is superseded ISBN 978 0 580 60367 9 £50.00 members, £50.00 non-members This product is only available in hard copy format.
Wheat, rye and respective flours, durum wheat and durum wheat semolina. Determination of the Falling Number according to HagbergPerten
BS EN 13201-3:2003
AW/4
Calculation of performance CORRIGENDUM 2
BS EN ISO 3166:—
BS EN ISO 13680:2001 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions
IDT/2/11
CORRIGENDUM 1
BS EN ISO 5163:2005 (BS 2000-236:2005) Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method CORRIGENDUM 1
AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month.
PTI/13
PSE/17
BS EN ISO 13703:2000 Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms CORRIGENDUM 2
BS EN ISO 6009:1994 Hypodermic needles for single use. Colour coding for identification CORRIGENDUM 1 CH/84
PSE/17
Also incorporates Corrigendum 1.
DD ENV ISO 14253:— Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments
BS EN ISO 9999:2007 Assistive products for persons with disability. Classification and terminology CORRIGENDUM 1 CH/173
BS EN ISO 10360:— Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
DD ENV ISO 14253-2:2001 Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification CORRIGENDUM 1 TDW/4
BS EN ISO 14505:—
BS 949:— Screwing taps
Also incorporates Corrigendum 1.
Country codes
Securing Email and Electronic Messages no current standard is superseded ISBN 978 0 580 50728 1 £40.00 members, £40.00 non-members
CPL/34/8
BS EN ISO 3166-1:2006 CORRIGENDUM 1
BIP 0020:2008
Road lighting
CORRIGENDUM 1
Codes for the representation of names of countries and their subdivisions
SPECIALIST BOOKS FROM BSI
BS EN 13201:—
BS EN ISO 10360-6:2001
Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles
Estimation of errors in computing Gaussian associated features
BS 949-1:1992 Specification of general dimensions
CORRIGENDUM 1
BS EN ISO 14505-2:2006
TDW/4
Determination of equivalent temperature
CORRIGENDUM 1
CORRIGENDUM 1
MTE/5
BS EN ISO 12947:— BS 7315:1990+A1:1993
PH/9/1
Textiles. Determination of the abrasion resistance of fabrics by the Martindale method
Specification for wrought aluminium and aluminium alloy enclosures for gas-filled highvoltage switchgear and controlgear
BS EN ISO 12947-1:1998
CORRIGENDUM 1
Martindale abrasion testing apparatus
Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
PEL/17/1
CORRIGENDUM 1
CORRIGENDUM 1
Also incorporates Amendment 1.
TCI/24
TDW/4
Update Standards Aug 2008
BS EN ISO 14978:2006
Prices may be subject to change.
19
Amendments to British Standards continued... BS EN 15333:—
BS EN 60601:—
BS ISO 13450:1996
Respiratory equipment. Open-circuit umbilical supplied compressed gas driving apparatus
Medical electrical equipment
Photography. 110-size cartridge, film and backing paper. Dimensions CORRIGENDUM 1
BS EN 15333-1:2008
BS EN 60601-1-6:2007
CORRIGENDUM 1
General requirements for basic safety and essential performance. Collateral standard. Usability
PH/4/7
CORRIGENDUM 1
Demand apparatus
CH/62/1
DD CEN/TS 15448:2006 Postal services. Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CORRIGENDUM 1
CPW/42
BS ISO 17484:— Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)
BS EN 60898:— Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations
BS ISO 17484-1:2006 Specifications for systems CORRIGENDUM 1
SVS/4
PRI/88/2
BS EN 60898-1:2003+A1:2004 BS EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV CORRIGENDUM 1
Circuit-breakers for A.C. operation CORRIGENDUM 2
BS ISO 17615:2007
PEL/23/1
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
Also incorporates Amendments 1 & 11 and Corrigendum 1.
CORRIGENDUM 1 NFE/35
GEL/20/17
BS EN 60915:2007 BS EN 60079:— Explosive atmospheres
BS EN 60079-6:2007 Equipment protected by oil immersion “o” CORRIGENDUM 1
Capacitors and resistors for use in electronic equipment. Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
Insulating liquids. Methods for counting and sizing particles CORRIGENDUM 1
BS EN 60335-1:2002+A2:2006 INTERPRETATION SHEET
PTI/16
DD ISO/TS 21872:—
GEL/10
General requirements
CORRIGENDUM 1
EPL/40X
BS EN 60970:2007 Household and similar electrical appliances. Safety
Hard coal and coke. Manual sampling
CORRIGENDUM 1
GEL/31/17
BS EN 60335:—
BS ISO 18283:2006
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp.
DD ISO/TS 21872-1:2007 Detection of Vibrio parahaemolyticus and Vibrio cholerae CORRIGENDUM 1
BS EN 62305:—
AW/9
Protection against lightning
CPL/61
Also incorporates Amendments 1 & 2 and Corrigenda 1, 2 & 3.
BS EN 62305-1:2006 General principles
BS EN 60335-2-7:2003+A2:2006 Particular requirements for washing machines
CORRIGENDUM 1 GEL/81
CORRIGENDUM 3 CPL/61/14
Also incorporates Amendments 1 & 2 and Corrigenda 1 & 2.
BS ISO 37:2005 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties CORRIGENDUM 1
BS EN 60335-2-76:2005+A1:2006
PRI/22
Particular requirements for electric fence energizers CORRIGENDUM 1 CPL/61/01
Also incorporates Amendments 1 & 11.
UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately.
BS ISO 5800:1987 Photography. Colour negative films for still photography. Determination of ISO speed
BS 4443:— Methods of test for flexible cellular materials
CORRIGENDUM 1 CPW/42
BS EN 60456:2005
BS 4443-7:1992+A1:2008
Clothes washing machines for household use. Methods for measuring the performance
BS ISO/TR 9464:1998
CORRIGENDUM 1
Guide to the use of ISO 5167-1:1991
CPL/59/1
CORRIGENDUM 1
AMENDMENT 1 £32.00 members, £64.00 non-members
Also incorporates Amendments 1, 2 & 3.
CPI/30/2
PRI/24
20
Prices may be subject to change.
Method 17. Determination of tear strength of flexible cellular material with an integral skin
Update Standards Aug 2008
BS 5467:1997+A3:2008
BS EN 1756:—
BS EN 13984:2004+A1:2006
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements
Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
AMENDMENT 3 £65.00 members, £130.00 non-members
BS EN 1756-1:2001+A1:2008
GEL/20/17
Tail lifts for goods
Also incorporates Amendments 1 & 2.
AMENDMENT 1 £85.00 members, £170.00 non-members
BS 5892:—
MHE/12
Specification for steel bars for retaining rings for tyred wheels AMENDMENT 2 £32.00 members, £64.00 non-members RAE/3/-/1
Also incorporates Amendment 1.
B/546/2
BS EN 50136:— Alarm systems. Alarm transmission systems and equipment
Railway rolling stock material (metric)
BS 5892-5:1987+A2:2008
AMENDMENT 1 £57.00 members, £114.00 non-members
BS EN 1811:1998+A1:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin AMENDMENT 1 £40.00 members, £80.00 non-members STI/53
BS EN 50136-1-1:1998+A2:2008 General requirements for alarm transmission systems AMENDMENT 2 £40.00 members, £80.00 non-members GW/1/5
Also incorporates Amendment 1.
BS 6724:1997+A3:2008
BS EN 12385:—
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire
Steel wire ropes. Safety
AMENDMENT 3 £75.00 members, £150.00 non-members
Definitions, designation and classification
GEL/20/17
Also incorporates Amendments 1 & 2.
BS 6878:1988+A2:1993 Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures or gas-filled high-voltage switchgear and controlgear AMENDMENT 2 £57.00 members, £114.00 non-members
BS EN 55016:— BS EN 12385-2:2002+A1:2008 AMENDMENT 1 £80.00 members, £160.00 non-members
BS EN 55016-1:— Radio disturbance and immunity measuring apparatus
MHE/2
BS EN 12385-3:2004+A1:2008 Information for use and maintenance
BS EN 55016-1-1:2007+A2:2008
AMENDMENT 1 £57.00 members, £114.00 non-members
Measuring apparatus
MHE/2
AMENDMENT 2 £85.00 members, £170.00 non-members GEL/210/12
PEL/17/1
Also incorporates Amendment 1.
Specification for radio disturbance and immunity measuring apparatus and methods
Also incorporates Amendment 1.
BS EN 12385-4:2002+A1:2008 Stranded ropes for general lifting applications
BS 8473:2006+A1:2008 Intruder and hold-up alarm systems. Management of false alarms. Code of practice
AMENDMENT 1 £57.00 members, £114.00 non-members
BS EN 55016-1-4:2007+A1:2008
MHE/2
AMENDMENT 1 £85.00 members, £170.00 non-members
AMENDMENT 1 £57.00 members, £114.00 non-members
GEL/210/12
GW/1
BS EN 12385-10:2003+A1:2008
Also incorporates Corrigendum 1.
Spiral ropes for general structural applications
BS EN 285:2006+A1:2008
AMENDMENT 1 £57.00 members, £114.00 non-members
Sterilization. Steam sterilizers. Large sterilizers
MHE/2
AMENDMENT 1 £85.00 members, £170.00 non-members
Help Us to Help
LBI/35
BS EN 12620:2002+A1:2008
BS EN 471:2003+A1:2007
AMENDMENT 1 £80.00 members, £160.00 non-members
High-visibility warning clothing for professional use. Test methods and requirements
You!
Aggregates for concrete Always quote your Customer Number
B/502
Also incorporates Corrigendum 1.
AMENDMENT 1 £57.00 members, £114.00 non-members PH/3/7
BS EN 13967:2004+A1:2006
BS EN 923:2005+A1:2008 Adhesives. Terms and definitions
Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics
AMENDMENT 1 £80.00 members, £160.00 non-members
AMENDMENT 1 £57.00 members, £114.00 non-members
PRI/52
B/546/2
Update Standards Aug 2008
Ancillary equipment. Radiated disturbances
Prices may be subject to change.
Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
21
Updated British Standards continued... BS EN 60335:— Household and similar electrical appliances. Safety
BS EN 60335-2-69:2003+A2:2008 Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use AMENDMENT 2 £80.00 members, £160.00 non-members CPL/61/10
Also incorporates Amendment 1.
BS EN 61058:— Switches for appliances
BS EN 61058-1:2002+A2:2008 General requirements AMENDMENT 2 £108.00 members, £216.00 non-members EPL/23
Also incorporates Amendment 1.
BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action.
BS 2657:1974 Specification for fluoroboric acid and metal fluoroborates for electroplating STI/33
BS 2868:1968 Specification for cadmium anodes and cadmium oxide for electroplating STI/33
Circumstances may lead to an earlier review.
BS 3597:1984
Confirmation indicates the continuing currency of a standard.
STI/33
A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to
[email protected] by 30 September, 2008.
BS 3900:—
Specification for electroplated coatings of 65/35 tin/nickel alloy
Methods of test for paints
BS 3900-0:1989 General introduction STI/10
BS 4098:1975
BS EN 61076:— Connectors for electronic equipment
BS EN 61076-2-101:2003+A1:2006
BS 558 and 564:1970 Specifications for nickel anodes, anode nickel and nickel salts for electroplating
Method for the determination of thickness, compression and recovery characteristics of textile floor coverings PRI/3
Circular connectors. Detail specification for circular connectors M8 with screw- or snaplocking, M12 with screw-locking for low voltage applications
STI/33
AMENDMENT 1 £80.00 members, £160.00 non-members
Specification for potassium and sodium cyanides for electroplating
EPL/48
STI/33
BS ISO 1629:1995+A1:2007
BS 811:1950
Rubber and lattices. Nomenclature
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
GME/25
STI/33
BS 1468:1967
BS 4292:—
AMENDMENT 1 £32.00 members, £64.00 non-members
BS 622:1967
BS 4223:1989 Methods for determination of constructional details of textile floor coverings with yarn pile PRI/3
BS 4290:1989
PRI/10
BS IEC 60287:— Electric cables. Calculation of the current rating
Specification for tin anodes and tin salts for electroplating
Method for specifying electroplated coatings of gold and gold alloys
STI/33
BS IEC 60287-2-1:1994+A2:2006 Thermal resistance. Calculation of thermal resistance AMENDMENT 2 £65.00 members, £130.00 non-members
BS 4292-2:1989 BS 1561:1966 Specification for silver anodes and silver salts for electroplating
BS 4493:1969 BS 1726:— Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing
Please do not send confirmation
telephone
BS 1726-2:2002 Extension springs
22
STI/33
Methods of test for dimensional stability of textile floor coverings
GME/15
BS 4682-2:1988 BS 1726-3:2002
Determination of dimensional changes due to changes in ambient humidity
Torsion springs
PRI/3
GME/15
as it can lead to duplication
Specification for copper salts for electroplating
BS 4682:—
of orders placed by
STI/33
STI/33
GEL/20/16
Also incorporates Amendment 1.
Gold and gold alloys for decorative and protective purposes
BS 4682-3:1981 BS 1872:1984 Specification for electroplated coatings of tin
Determination of dimensional changes after exposure to heat
STI/33
PRI/3
Prices may be subject to change.
Update Standards Aug 2008
BS 4682-4:1981
BS 6102-16:1997
BS 8726-2:2002
Determination of dimensional changes after immersion in water
Specification for replacement brake blocks
Torsion springs
GME/25
GME/15
BS 6137:1982
BS 4A 4:—
PRI/3
BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
Specification for electroplated coatings of tin/lead alloys
Specification for test pieces and test methods for metallic materials
STI/33
PRI/3
BS 6654:1985 BS 4805:1989 Method for determination of the dimensions of rectangular textile floor coverings
Method for determination of the electrical resistivity of textile floor coverings PRI/3
Elevated temperature
BS 7078:1989 Method for determination of tuft withdrawal force of carpets
Method for determination of the electrical resistance to earth of an installed textile floor covering
PRI/3
PRI/3
BS 5287:1988
BS 7288:1990
Specification for assessment and labelling of textile floor coverings tested to BS 4790 PRI/3
BS 5315:1991 Hose clamps (worm drive type) for general purpose use (metric series) PSE/6
Tensile tests
BS 4A 4-1.2:1967
PRI/3
BS 5229:1975
BS 4A 4-1:—
ACE/61
BS 4A 4-1.3:1967 Uninterrupted creep and rupture tests. Metric units
Specification for socket outlets incorporating residual current devices (S.R.C.D.s) PEL/23
ACE/61
BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
BS 7445:—
ACE/61/-/24
Description and measurement of environmental noise
BS 6L 17:1985
BS 5325:2001
BS 7445-1:2003
Specification for sheet and strip of 99% aluminium (temper designation-O)
Installation of textile floor coverings. Code of practice
Guide to quantities and procedures
ACE/61/-/24
EH/1/3
PRI/3
BS 8100:— BS 5350:—
Lattice towers and masts
Methods of test for adhesives
BS 5350-C5:2002 Determination of bond strength in longitudinal shear for rigid adherends
BS 8100-2:1986 Guide to the background and use of Part 1 ’Code of practice for loading’ B/525/32
BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) ACE/61/-/24
BS 7L 37:1989
Specification for gold potassium cyanide for electroplating
Code of practice for strength assessment of members of lattice towers and masts
Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-siliconmanganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
STI/33
B/525/32
ACE/61/-/24
BS 5920:1980
BS 8100-4:1995
BS 4L 54:1986
Method for determination of dimensions of textile floor covering test specimens
Code of practice for loading of guyed masts
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
PRI/52
BS 5658:1979
BS 8100-3:1999
B/525/32
PRI/3
ACE/61/-/24
BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground PRI/67
PRI/3
BS 8726:— BS 6102:— Cycles
Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design
BS 4L 56:1986 Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24
BS 4L 59:1985 BS 6102-2:1982 Specification for photometric and physical requirements of reflective devices
BS 8726-1:2002 Compression springs
Specification for sheet and strip of aluminiummanganese alloy (temper designation H16 or H26)
GME/25
GME/15
ACE/61/-/24
Update Standards Aug 2008
Prices may be subject to change.
23
British Standards Proposed for Confirmation continued... BS 3L 63:1971
BS L 118:1975
BS EN 970:1997
Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
Non-destructive examination of fusion welds. Visual examination
ACE/61/-/24
WEE/46
ACE/61/-/24
BS EN 1792:2003 BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24
BS L 105:1971 Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24
BS L 109:1971 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titaniumzirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
BS 2L 126:1970
BS EN ISO 9692-1:2003
Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
Manual metal-arc welding, gas-shielded metalarc welding, gas welding, TIG welding and beam welding of steels
Specification for sheet and strip of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24
BS L 114:1971 Specification for tube of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24
BS L 115:1971 Specification for plate of aluminiummagnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24
BS L 117:1975
WEE/1
ACE/61/-/24
BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
BS EN ISO 9692-4:2003 Clad steels WEE/1
ACE/61/-/24
BS EN ISO 9856:2003
Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1) ACE/61/-/24
Conveyor belts. Determination of elastic modulus PRI/67
BS EN 10056:— Specification for structural steel equal and unequal angles
ACE/61/-/24
BS L 113:1971
BS EN ISO 9692:— Welding and allied processes. Recommendations for joint preparation
BS L 155:1977 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
WEE/1
ACE/61/-/24
ACE/61/-/24
BS L 110:1971
Welding. Multilingual list of terms for welding and related processes
BRITISH STANDARDS REVIEWED AND CONFIRMED
BS EN 10056-1:1999 Dimensions ISE/13
It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.
BS EN 10058:2003 Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31
BS EN 10059:2003 Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31
BS EN 10060:2003 BS 7872:2002 Manned security services. Cash-in-transit services (collection and delivery). Code of practice
Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31
GW/3
Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
BS EN ISO 284:2003 Conveyor belts. Electrical conductivity. Specification and test method
Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions
ACE/61/-/24
PRI/67
ISE/31
24
BS EN 10061:2003
Prices may be subject to change.
Update Standards Aug 2008
BS EN 10092:—
BS ISO 7663:2005
Hot rolled spring steel flat bars
Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures PRI/50
BS EN 10092-1:2003 Flat bars. Dimensions and tolerances on shape and dimensions
BS ISO 9136:—
ISE/31
Abrasive grains. Determination of bulk density
BS EN 10092-2:2003
BS ISO 9136-1:2004
Ribbed and grooved spring leaves. Dimensions and tolerances on shape and dimensions
MTE/13
Macrogrits
ISE/31
BS ISO 15637:— BS EN 13827:2003 Steel cord conveyor belts. Determination of the lateral and vertical displacement of steel cords PRI/67
BS EN 14385:2004 Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V EH/2/1
Holding fixtures of cylindrical abrasive sleeves
BS ISO 15637-1:2002 Holding fixtures with shank for hand-held grinding machines MTE/13
BS ISO 15637-2:2002
BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to
[email protected] by 30 September, 2008. Unless otherwise stated, the standards below are proposed as re-declaration of obsolescence.
Holding fixtures for stationary machines MTE/13
BS ISO 125:2003 Natural rubber latex concentrate. Determination of alkalinity PRI/50
BS ISO 126:2005 Natural rubber latex concentrate. Determination of dry rubber content
BS 442:1950
BS ISO 21537:— Clamping flanges for superabrasive cutting-off wheels. Natural stone
Specification for terminals for electrical apparatus for railway signalling purposes GEL/9
BS ISO 21537-1:2004 Natural stone MTE/13
This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
PRI/50
BS ISO 21537-2:2004 Building and construction
BS ISO 2254:2004
BS 581:1950
MTE/13
Cloves, whole and ground (powdered). Specification
Specification for electrically-driven pointoperating machines for railways
AW/7
BS ISO 21538:2004
BS ISO 2302:2005
Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
Isobutene-isoprene rubber (IIR). Evaluation procedures
MTE/13
PRI/50
GEL/9
This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
BS ISO 21870:2005 BS ISO 3899:2005 Rubber. Nitrile latex. Determination of residual acrylonitrile content
Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry
PRI/50
PEL/78
BS ISO 22917:2004 BS ISO 4659:2003 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS 697:1986 Specification for rubber gloves for electrical purposes
PRI/50
Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
This standard has been proposed for obsolescence as it is no longer relevant. It is superseded by BS EN 60903:1993
MTE/13
PRI/50
BS 1659:1950 BS ISO 5794:— Rubber compounding ingredients. Silica, precipitated, hydrated
e-mail your order
BS ISO 5794-1:2005
[email protected]
Non-rubber tests PRI/50
Update Standards Aug 2008
Prices may be subject to change.
Specification for tractive armature direct current neutral track and line relays for railway signalling GEL/9
This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
25
British Standards Proposed for Obsolescence continued... BS 1745:1951
BS 7825-3.2:1997
BS 490:—
Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position)
Electrical properties
Conveyor and elevator belting
GEL/9
This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come
BS 6088:1981 Specification for solid glass beads for use with road marking compounds and for other industrial uses B/510
This standard has been re-proposed for obsolescence for a further period as it is no longer relevant
BS 8404:2001 Packaging. Child-resistant packaging. Requirements and testing procedures for nonreclosable packages for pharmaceutical products PKW/0
PRI/20
This standard has been declared obsolescent as there are more applicable ISO standards now available
Mechanical properties of plastics
BS 490-10.1:1983
PRI/20
Introduction
This standard has been declared obsolescent as there are more applicable ISO standards now available
PRI/67
Mechanical properties of rubber PRI/20
This standard has been declared obsolescent as there are more applicable ISO standards now available
BS 7825-3.5:1997 Optical and weathering properties
BS HC 404:1977
BS 7825-3.6:1997
This standard has been re-proposed for obsolescence for a further period as it is no longer relevant
BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. Unless otherwise stated, the standards below are re-declared obsolescent for a further period.
This standard has been proposed for withdrawal as it is superseded following the publication of BS EN ISO 14890:2003, BS EN ISO 3289 and various other BS EN ISO test methods
BS 7825-3.4:1998
PRI/20
ACE/61/-/15
Testing for physical properties
BS 7825-3.3:1997
This standard has been proposed for obsolescence as it is superseded by BS EN 14375:2003. It will be withdrawn when the MHRA regulations 2003 are updated
Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)
BS 490-10:—
This standard has been declared obsolescent as there are more applicable ISO standards now available
BS 490-10.5:1984 Method for determination of tensile strength and elongation at break of rubber covers PRI/67
This standard has been proposed for withdrawal as it is superseded following the publication of BS EN ISO 14890:2003, BS EN ISO 3289 and various other BS EN ISO test methods
BS 490-10.7:1984 Method for determination of length of an endless belt
Dimensional properties PRI/20
PRI/67
This standard has been proposed for withdrawal as it is superseded by BS EN ISO 16851:1994
This standard has been declared obsolescent as there are more applicable ISO standards now available
BRITISH STANDARDS PROPOSED FOR WITHDRAWAL
WITHDRAWN STANDARDS
A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to
[email protected] by 30 September, 2008. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.
BS 7825:— Calibration of rubber and plastics test equipment
BS 196:1961 BS 7825-3:— Calibration schedules
Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase A.C. circuits up to 250 volts PEL/23
BS 7825-3.1:1997 Thermal properties PRI/20
This standard has been declared obsolescent as there are more applicable ISO standards now available
26
This standard has been proposed for withdrawal as the products have almost been replaced by those manufactured to BS EN 60309-1:1999 and BS 60309-2:1999. The ’sliding earth’ contact associated with BS 196 products has been found to be less reliable that the pin and socket tube design
Prices may be subject to change.
For further information visit
www.bsigroup.com/ withdrawn Update Standards Aug 2008
BS 3406:—
BS 7423:1999
Methods for determination of particle size distribution
Specification for safety requirements for children’s travel cots of internal base length not less than 900 mm CW/41
BS 3406-7:1988 Recommendations for single particle light interaction methods
This standard has been proposed for withdrawal as it is superseded by BS EN 716-1:1996 and BS EN 716-2:1996
BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn
LBI/37
This standard has been proposed for withdrawal as it is superseded by BS ISO 13323-1:2000
BS EN 186150:1997 BS 3628:1963 Specification for hose clips (worm drive type) for general purpose use PSE/6
This standard has been proposed for withdrawal as it is no longer relevant
Connector sets for optical fibres and cables. Type OCCA-BU GEL/86/2
This standard has been proposed for withdrawal as the CENELEC standard is also proposed for withdrawal
BS 3648:1963
BS EN 186160:1997
Specification for cycle rear lamps
Connector sets for optical fibres and cables. Type OCCA-PC
GME/25
This standard has been proposed for withdrawal as it is superseded by BS 6102-3:1986
BS 727:1983 Specification for radio-interference measuring apparatus GEL/210/12
This standard has been withdrawn. It was superseded by BS CISPR 16-1:1998 and BS CISPR 162:1996 which have been withdrawn and subsequently superseded by the BS EN 55016 series. This standard is no longer used
BS 1042:— Measurement of fluid flow in closed conduits
GEL/86/2
This standard has been proposed for withdrawal as the CENELEC standard is also proposed for withdrawal
BS 3676:—
BS 1042-1.4:1992 Pressure differential devices. Guide to the use of devices specified in Sections 1.1 and 1.2 CPI/30
Switches for household and similar fixed electrical installations
Superseded by BS ISO/TR 9464:1998
BS EN 186170:1998 BS 3676-1:1989 Specification for general requirements PEL/23
This standard has been proposed for withdrawal as it is superseded by BS EN 60669-1:1996
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type RCC GEL/86/2
This standard has been proposed for withdrawal as the CENELEC standard is also proposed for withdrawal
STI/33
This standard has been proposed for withdrawal as it is superseded by BS ISO 4525:2003
BS 4641:1986 Method for specifying electroplated coatings of chromium for engineering purposes STI/33
BS EN 186180:1996 Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSB GEL/86/2
This standard has been proposed for withdrawal as the CENELEC standard is also proposed for withdrawal
BS EN 186210:1996 Method for specifying electroplated coatings of nickel for engineering purposes STI/33
This standard has been proposed for withdrawal as it is superseded by BS EN ISO 4526:2004
BS 4585-15:1985 Determination of volatile oil content AW/7
BS 6651:1999 Code of practice for protection of structures against lightning GEL/81
Superseded by BS EN 62305-1:2006, BS EN 623052:2006, BS EN 62305-3:2006 and BS EN 623054:2006
BS 6910:—
This standard has been proposed for withdrawal as it is superseded by BS EN ISO 6158:2004
BS 4758:1986
Methods of test for spices and condiments
Superseded by BS ISO 6571:2008
BS 4601:1970 Specification for electroplated coatings of nickel plus chromium on plastics materials
BS 4585:—
Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V A.C. and 1500 V D.C.
Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type CF08
BS 6910-1:1988
GEL/86/2
GEL/20/11
This standard has been proposed for withdrawal as the CENELEC standard is also proposed for withdrawal
Superseded by BS 7933-1:2007, BS 7933-2:2007, HD 631.1 S2:2007, HD 631.2:2007 and BS EN 50393:2006
Specification for materials
BS 6728:— Thermoplastics hot water bottles
BS 6728-2:1993 Specification for hot water bottles manufactured from polyolefin materials PRI/68
This standard has been proposed for withdrawal as the product is no longer made
Update Standards Aug 2008
BS 7087:— BS AU 5:1963
Herbs and spices ready for food use
Specification for dimensions of a ’contact’ type coupling for vacuum and pressure braking systems on trailers and semi-trailers
BS 7087-8:1996
AUE/11
This standard has been proposed for withdrawal as it is superseded by BS AU 138a:1980 and subsequently superseded by BS AU 138B:2000
Prices may be subject to change.
Specification for dried ginger (whole and ground) AW/7
Superseded by BS ISO 1003:2008
27
British Standards Withdrawn continued... BS 7517:1995
BS EN 758:1997
BS EN 50086-2-2:1996
Nuclear power plants. Control rooms. Operator controls
Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine grain steels. Classification
Pliable conduit systems
NCE/8
Superseded by BS IEC 61227:2008
PEL/213
Superseded by BS EN 61386-22:2004
WEE/39
Superseded by BS EN ISO 17632:2008
BS 7807:1995 Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings FSH/12
This standard has been withdrawn as it is no longer relevant
Flexible conduit systems
BS EN 1597:—
PEL/213
Welding consumables. Test methods
Superseded by BS EN 61386-23:2004
BS EN 1597-1:1997
BS EN 60335:—
Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
Safety of household and similar electrical appliances
WEE/39
Superseded by BS EN ISO 15792-1:2008
BS 7808:1995 Electrical insulating materials. A.C. voltage endurance evaluation. Introduction B/520
Superseded by DD IEC/TS 61251:2008
BS EN 50086-2-3:1996
BS EN 1597-2:1997 Preparation of test piece for single-run and two-run technique test specimens in steel
BS EN 60335-2-76:1999 Particular requirements for electric fence energizers CPL/61/01
Superseded by BS EN 60335-2-76:2005+A1:2006
WEE/39
Superseded by BS EN ISO 15792-2:2008
BS ISO/IEC TR 13335:—
BIP 2003:2003 Fire Extinguishing Systems. A guide to the types, application and considerations This product has been withdrawn as it is no longer produced
BIP 2048:2004 Buildings and constructed assets: Service life planning This product has been withdrawn as it is superseded by BS ISO 15686-5:2008
DD 8788:— UK lifelong learner information profile (UKLeaP)
DD 8788-1:2006 Guide IST/43
BS EN 1599:1997
Information technology. Guidelines for the management of IT security
Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
BS ISO/IEC TR 13335-3:1998
WEE/39
Techniques for the management of IT security
Superseded by BS EN ISO 3580:2008
IST/33
Superseded by BS ISO/IEC 27005:2008
BS EN 1668:1997 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification WEE/39
Superseded by BS EN ISO 636:2008
BS EN 13506:2002 (BS 6068-2.74:2002) Water quality. Determination of mercury by atomic fluorescence spectrometry EH/3/2
DD 8788-2:2006
BS EN 50083:—
Representation and terminology in implementing the UK lifelong learner information profile. Code of practice
Cabled distribution systems for television and sound signals
This draft for development has been withdrawn as it no longer represents the current requirements of UK academia
BS EN 50083-4:1999 Passive wideband equipment for coaxial cable networks EPL/100/4
DD 8788-3:2006 IST/43
This draft for development has been withdrawn as it no longer represents the current requirements of UK academia
IST/33
Superseded by BS ISO/IEC 27005:2008
BS AU 205:1986 Method of test for effect of braking on steady state cornering behaviour of road vehicles AUE/15
Superseded by BS EN ISO 17852:2008, BS 60682.98:2006
Superseded by BS EN 60728-4:2008 UKLeaP. Specification
Selection of safeguards
Superseded by BS ISO 7975:2006
This draft for development has been withdrawn as it no longer represents the current requirements of UK academia
IST/43
BS ISO/IEC TR 13335-4:2000
BS EN 50086:— Specification for conduit systems for cable management
BS EN 50086-2:—
BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to
[email protected] by 30 September, 2008, in order to be considered by the relevant UK Committee.
Particular requirements
BS EN 440:1995 Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS EN 50086-2-1:1996
WEE/39
PEL/213
Railway applications. Suspension components. Helical suspension springs, steel
Superseded by BS EN ISO 14341:2008
Superseded by BS EN 61386-21:2004
RAE/3
28
Rigid conduit systems
Prices may be subject to change.
BS EN 13298:2003
Update Standards Aug 2008
BS EN 13597:2003
BS 8848:2007/Amendment 1
BS EN 809:1998/Amendment 1
Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom
Pumps and pump units for liquids. Common safety requirements
RAE/3/-/4
SVS/2/-/5
BS EN 13913:2003
BS EN 54:—
Railway applications. Rubber suspension components. Elastomer-based mechanical parts
Fire detection and fire alarm systems
MCE/6
BS EN 820:— Advanced technical ceramics. Thermomechanical properties of monolithic ceramics
RAE/3/-/4
BS EN 54-3 (Revision) Fire alarm devices. Sounders
BS EN 14200:2004
will supersede BS EN 54-3:2001
Railway applications. Suspension components. Parabolic springs, steel
FSH/12/5
BS EN 820-4 Determination of flexural creep deformation at elevated temperatures will supersede DD ENV 820-4:2002
RAE/3/-/4
BS EN 116 (Revision)
RPI/13
Diesel and domestic heating fuels. Determination of cold filter plugging point
NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.
will supersede BS EN 116:1998
BS EN 820-5
PTI/13
Determination of elastic moduli at elevated temperatures RPI/13
BS EN 179:2008/Amendment 1 Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods B/538
BS EN 836 (Revision) Garden equipment. Powered lawnmowers. Safety will supersede BS EN 836:1997 AGE/20
BS EN 438:— BS XXXX Specification for Submission of Digital Evidence for Examination Coursework
High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates)
IST/43
BS EN 438-9 BS 6643:— Recharging fire extinguishers (manufactured to BS 5423 ’Specification for portable fire extinguishers’)
BS EN 843-6
PRI/76
Guidance for fractographic investigation will supersede DD CEN/TS 843-6:2004
BS 6643-1 (Revision)
Gypsum plasterboards. Definitions, requirements and test methods
Specification for procedure and materials
B/544/2
Specification for powder refill charges will supersede BS 6643-2:1985
RPI/13
BS EN 894:— Safety of machinery. Ergonomics requirements for the design of displays and control actuators
will supersede BS 6643-1:1985
BS 6643-2 (Revision)
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
Classification and specifications for alternative core laminates
BS EN 520:2004/Amendment 1
FSH/2
BS EN 843:—
BS EN 590 (Revision) Automotive fuels. Diesel. Requirements and test methods, to allow for 7% of FAME blending will supersede BS EN 590:2004 PTI/2
BS EN 894-4 Location and arrangement of displays and control actuators PH/9
FSH/2
BS EN 615 (Revision) BS 7863 (Revision) Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers will supersede BS 7863:1996
Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders) will supersede BS EN 615:1995
Greywater treatment systems
Paints and varnishes. Coating materials and coating systems for exterior wood
FSH/18/4
FSH/2
BS 8525:—
BS EN 927:—
BS EN 927-1 (Revision) BS EN 623:—
Classification and selection
Advanced technical ceramics. General and textural properties of monolithic ceramics
will supersede BS EN 927-1:1997 STI/28
BS EN 623-5 BS 8525-1
Determination of phase volume fraction by evaluation of micrographs
BS EN 927-7
Code of practice for installation B/505/21
RPI/13
STI/28
Update Standards Aug 2008
Prices may be subject to change.
Assessment of knot staining resistance
29
New Work Started continued... BS EN 933:—
BS EN 1119
BS EN 1463:—
Tests for geometrical properties of aggregates
Plastics piping systems. Joints for glassreinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
Road marking materials. Retroreflecting road studs
PRI/88/2
Initial performance requirements
BS EN 933-8 (Revision) Assessment of fines. Sand equivalent test will supersede BS EN 933-8:1999
BS EN 1463-1 (Revision) will supersede BS EN 1463-1:1998
B/502/6
B/509/2
BS EN 1125:2008/Amendment 1 BS EN 933-10 (Revision) Assessment of fines. Grading of fillers (air-jet sieving)
Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods B/538
will supersede BS EN 933-10:2001
BS EN 1527 (Revision) Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods will supersede BS EN 1527:1998
B/502/6
BS EN 1254:—
B/538
Copper and copper alloys. Plumbing fittings
BS EN 1006 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties RPI/13
BS EN 1639 (Revision) BS EN 1254-3 (Revision)
Dentistry. Medical devices for dentistry. Instruments
Fittings with compression ends for use with plastics pipes
will supersede BS EN 1639:2004
will supersede BS EN 1254-3:1998
BS EN 1007:—
NFE/34/3
BS EN 1640 (Revision)
Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements
BS EN 1254-4 (Revision) BS EN 1007-5 (Revision) Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature will supersede BS EN 1007-5:2003 RPI/13
BS EN 1071:— Advanced technical ceramics. Methods of test for ceramic coatings
Fittings combining other end connections with capillary or compression ends NFE/34/3
will supersede BS EN 1641:2004 CH/106
BS EN 1317-5:2007/Amendment 2
BS EN 1642 (Revision)
Product requirements and evaluation of conformity for vehicle restraint systems
Dentistry. Medical devices for dentistry. Dental implants
B/509/1
will supersede BS EN 1642:2004 CH/106
Slabs of natural stone for external paving. Requirements and test methods
BS EN 1676 (Revision)
will supersede BS EN 1341:2001
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
B/507/2
will supersede BS EN 1676:1997
Determination of coating thickness by cross sectioning
Tests for mechanical and physical properties of aggregates
BS EN 1641 (Revision)
Road restraint systems
BS EN 1341 (Revision)
BS EN 1097:—
CH/106
BS EN 1317:—
RPI/13
RPI/13
will supersede BS EN 1640:2004
Dentistry. Medical devices for dentistry. Materials
Determination of fracture strain
will supersede DD CEN/TS 1071-10:2004
Dentistry. Medical devices for dentistry. Equipment
will supersede BS EN 1254-4:1998
BS EN 1071-9
BS EN 1071-10
CH/106
NFE/35
BS EN 1343 (Revision) Kerbs of natural stone for external paving. Requirements and test methods
BS EN 1706 (Revision)
will supersede BS EN 1343:2001
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
B/507/2
will supersede BS EN 1706:1998 NFE/35
BS EN 1344 (Revision) BS EN 1097-8 (Revision)
Clay pavers. Requirements and test methods
BS EN 1751 (Revision)
Determination of the polished stone value
will supersede BS EN 1344:2002
will supersede BS EN 1097-8:2000
Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves
B/507/3
B/502/6
will supersede BS EN 1751:1999 RHE/2
BS EN 1423 (Revision) BS EN 1106 (Revision)
Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
BS EN 1790 (Revision)
Manually operated taps for gas burning appliances will supersede BS EN 1106:2001
will supersede BS EN 1423:1998
will supersede BS EN 1790:1998
GSE/22
B/509/2
B/509/2
30
Prices may be subject to change.
Road marking materials. Preformed road markings
Update Standards Aug 2008
BS EN 1811 (Revision)
BS EN 2997:—
BS EN 9300:—
Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak
Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
will supersede BS EN 1811:1998+A1:2008 STI/53
BS EN 9300-002 BS EN 1824 (Revision) Road marking materials. Road trials will supersede BS EN 1824:1998
BS EN 2997-011 (Revision)
Requirements
Dummy receptacle. Product standard
ACE/1
will supersede BS EN 2997-011:2006 ACE/6
BS EN 9300-005
B/509/2
Authentication and Verification
BS EN 3388 BS EN 1828 (Revision) Health informatics. Categorical structure for classifications and coding systems of surgical procedures will supersede BS EN 1828:2002 IST/35
BS EN 1856:— Chimneys. Requirements for metal chimneys
BS EN 1856-2 (Revision) Metal liners and connecting flue pipes
Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa/650°C. Manufacturing method optional. Technical specification ACE/12
ACE/1
BS EN 9300-007 Terms and References ACE/1
BS EN 3389
BS EN 9300-015
Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification
Explicit CAD assembly structure
ACE/12
BS EN 9300-100
ACE/1
Common concepts for Long term archiving and retrieval of CAD 3D mechanical information
will supersede BS EN 1856-2:2004 B/506
BS EN ISO 6886
BS EN 1871 (Revision)
Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test)
Road marking materials. Physical properties
will supersede BS ISO 6886:2006
will supersede BS EN 1871:2000
AW/307
B/509/2
ACE/1
BS EN 9300-110 CAD mechanical 3D Explicit geometry information ACE/1
BS EN ISO 8503:— BS EN 1889:— Machines for underground mines. Mobile machines working underground. Safety
BS EN 1889-1 (Revision)
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates
BS EN ISO 8503-1 (Revision)
will supersede BS EN 1889-1:2003
Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
MRE/1
will supersede BS EN ISO 8503-1:1995
Rubber tyred vehicles
BS EN WI EC019029:— Prestressing steels. Protected and sheathed strands for prestressing
BS EN WI EC019029-1 General ISE/9
STI/21
BS EN WI EC019031-3 BS EN 1935 (Revision) Building hardware. Single-axis hinges. Requirements and test methods will supersede BS EN 1935:2002 B/538
Adherent strands
BS EN ISO 8503-2 (Revision) Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure will supersede BS EN ISO 8503-2:1995 STI/21
BS EN 2283 (Revision) Aerospace series. Testing of aircraft wiring will supersede BS EN 2283:1996 ACE/6
BS EN ISO 8503-3 (Revision) Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
BS EN ISO 2898:—
will supersede BS EN ISO 8503-3:1995
Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials
STI/21
ISE/9
BS EN WI 00019363 Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method PTI/15
BS EN WI 00023142 Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing PVE/3/7
BS EN ISO 8503-4 (Revision) BS EN ISO 2898-2 (Revision) Preparation of test specimens and determination of properties
Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
will supersede BS EN ISO 2898-2:2000
will supersede BS EN ISO 8503-4:1995
Transportable gas cylinders. Porous masses for acetylene cylinders
PRI/82
STI/21
PVE/3/3
Update Standards Aug 2008
Prices may be subject to change.
PD CEN/TR WI 00023144
31
New Work Started continued... PD CEN/TR WI 00033345
BS EN 10294:—
BS EN 12561-4 (Revision)
Building hardware. Door fittings for use by children, elderly and disabled people in domestic and public buildings. A guide for specifiers
Hollow bars for machining. Technical delivery conditions
Top devices for top emptying and filling of liquid products
B/538
BS EN 10294-2
will supersede BS EN 12561-4:2002 RAE/1/-/9
Stainless steels with specified machinability properties
BS EN WI 00033360 Building hardware. Single swing spring hinge closing devices. Requirements and test methods B/538
BS EN 12561-5 (Revision) Top devices for bottom emptying and top filling of liquid products
ISE/19
will supersede BS EN 12561-5:2002
BS EN ISO 11354:—
RAE/1/-/9
Requirements for establishing manufacturing enterprising interoperability
BS EN 12561-6 (Revision)
PD CEN/TR WI 00156114
Manholes
Ventilation for buildings. Chilled beams. Testing and rating of passive chilled beams
BS EN ISO 11354-1
will supersede BS EN 12561-6:2002
RHE/2
Framework for enterprise interoperability
RAE/1/-/9
AMT/5
PD CEN/TR WI 00156115 Air flow measurements in ventilation systems RHE/2
BS EN 12561-7 (Revision) BS EN 12101:—
Platforms and ladders
Smoke and heat control systems
will supersede BS EN 12561-7:2004 RAE/1/-/9
DD CEN/TS WI 00184206 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by the single fibre push-out method RPI/13
BS EN 12101-7 Smoke duct sections
BS EN 12561-8 (Revision)
FSH/25
Heating connections will supersede BS EN 12561-8:2004 RAE/1/-/9
BS EN 12101-10:2005/Amendment 1 Power supplies FSH/25
BS EN 12665 (Revision)
BS EN 12209 (Revision)
will supersede BS EN 12665:2002
Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test methods
CPL/34/10
will supersede BS EN 12209:2003
BS EN 12696 (Revision)
DD CEN/TS WI 00184207 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites RPI/13
Cathodic protection of steel in concrete
B/538
will supersede BS EN 12696:2000
BS EN WI 00192046
GEL/603
Firefighting hoses. Test methods FSH/17/6
BS EN 12212 Advanced technical ceramics. Unified method for classification
BS EN WI 00193223
will supersede DD ENV 12212:1996
Adhesives. Emulsion polymerized isocyanat (EPI) for load bearing timber structures. Classification and performance requirements
RPI/13
PRI/52
BS EN 12513 (Revision)
PD CEN/TR WI 00325007:— Prevention of crime. Urban planning and building design
Light and lighting. Basic terms and criteria for specifying lighting requirements
BS EN 12802 (Revision) Road marking materials. Laboratory methods and identification will supersede BS EN 12802:2000 B/509/2
Founding. Abrasion resistant cast irons
BS EN 12948 (Revision)
will supersede BS EN 12513:2000
Liming materials. Determination of size distribution by dry and wet sieving
ISE/NFE/9
will supersede BS EN 12948:2002 CII/37
BS EN 12561:— PD CEN/TR WI 00325007-8 Protection of buildings and sites against criminal attacks with vehicles B/562
Railway applications. Tank wagon
BS EN 12952:— Water-tube boilers and auxiliary installations
BS EN 12561-1 (Revision) Marking of tank wagons for the carriage of dangerous goods
BS EN 12952-2 (Revision)
BS EN WI 00344006
will supersede BS EN 12561-1:1999
Materials for pressure parts of boilers and accessories
Steel static storage systems. Adjustable pallet racking. Terms and definitions
RAE/1/-/9
will supersede BS EN 12952-2:2001 PVE/2
MHE/8
BS EN 12561-3 (Revision) Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12952-3 (Revision)
BS EN WI 00348007 Facility management. Processes
will supersede BS EN 12561-3:2002
will supersede BS EN 12952-3:2001
FMW/1
RAE/1/-/9
PVE/2
32
Prices may be subject to change.
Design and calculation for pressure parts
Update Standards Aug 2008
BS EN 12952-4 (Revision)
BS EN 13126-19
BS EN 13195
Inservice boiler life expectance calculations
Requirements and test procedures for durability, strength, security and functionality of Sliding Closing Devices (SCD) for windows and door height windows
Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
will supersede BS EN 12952-4:2000 PVE/2
NFE/35
B/538
BS EN 12952-5 (Revision) Workmanship and construction of pressure parts of the boiler will supersede BS EN 12952-5:2001 PVE/2
BS EN 12952-6 (Revision)
BS EN 13197 (Revision) BS EN 13141:—
Road marking materials. Wear simulators
Ventilation for buildings. Performance testing of components/products for residential ventilation
will supersede BS EN 13197:2001
BS EN 13141-7 (Revision)
will supersede BS EN 12952-6:2002
Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
PVE/2
will supersede BS EN 13141-7:2004
Inspection during construction, documentation and marking of pressure parts of the boiler
RHE/2
BS EN 13146:— Railway applications. Track. Test methods for fastening systems
Road marking materials. Requirements for factory production control will supersede BS EN 13212:2001 B/509/2
Railway applications. Track. Switches and crossings
BS EN 13232-4:2005/Amendment 1 Actuation, locking and detection
BS EN 12966-1:2005/Amendment 1 Product standard
BS EN 13146-1 (Revision)
B/509/20
Determination of longitudinal rail restraint will supersede BS EN 13146-1:2002
BS EN 13001:—
BS EN 13212 (Revision)
BS EN 13232:—
BS EN 12966:— Road vertical signs. Variable message traffic signs
B/509/2
RAE/2
RAE/2
BS EN 13232-5:2005/Amendment 1 Switches RAE/2
Cranes. General design
BS EN 13146-2 (Revision) BS EN 13001-2:2004/Amendment 3 Load actions MHE/3/1
BS EN 13050 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
Determination of torsional resistance will supersede BS EN 13146-2:2002
BS EN 13232-6:2005/Amendment 1 Fixed common and obtuse crossings
RAE/2
RAE/2
BS EN 13146-3 (Revision)
BS EN 13232-7:2006/Amendment 1
Determination of attenuation of impact loads will supersede BS EN 13146-3:2002
Crossings with moveable parts RAE/2
RAE/2
will supersede DD ENV 13050:2001 B/538
BS EN 13110 (Revision) Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction will supersede BS EN 13110:2002 PVE/19
BS EN 13232-8:2007/Amendment 1 BS EN 13146-4 (Revision)
Expansion devices
Effect of repeated loading
RAE/2
will supersede BS EN 13146-4:2002 RAE/2
BS EN 13232-9:2006/Amendment 1 Layouts
BS EN 13146-5 (Revision) will supersede BS EN 13146-5:2002 RAE/2
BS EN 13126:— Building hardware. Specifications for the fittings for the operation of windows and door height windows
BS EN 13146-6 (Revision) Effect of severe environmental conditions will supersede BS EN 13146-6:2002
BS EN 13126-5 Specification for devices that restrict the opening of windows will supersede DD CEN/TS 13126-5:2004 B/538
RAE/2
Determination of electrical resistance
BS EN 13303 (Revision) Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens will supersede BS EN 13303:2003 PTI/13
RAE/2
BS EN 13304 (Revision) BS EN 13146-7 (Revision) Determination of clamping force will supersede BS EN 13146-7:2002
Bitumen and bituminous binders. Framework for specification of oxidised bitumen will supersede BS EN 13304:2003 B/510/19
RAE/2
BS EN 13126-18 Requirements and test procedures for durability, strength, security and functionality of fan light openers for windows and door height windows B/538
Update Standards Aug 2008
BS EN 13305 (Revision) BS EN 13146-8 (Revision) In service testing
Bitumen and bituminous binders. Framework of specification of hard industrial bitumens
will supersede BS EN 13146-8:2002
will supersede BS EN 13305:2003
RAE/2
B/510/19
Prices may be subject to change.
33
New Work Started continued... BS EN 13411:—
BS EN 13633
BS EN 14034-2:2006/Amendment 1
Termination of steel wire ropes. Safety
Building hardware. Electrically controlled panic exit systems for use on escape routes. Requirements and test methods
Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds
BS EN 13411-8
B/538
FSH/23/-/1
Swage terminals and swaging MHE/2
BS EN 13637 Road marking materials. Sampling and testing
Building hardware. Electrically controlled emergency exit systems for use on escape routes. Requirements and test methods
B/509/2
B/538
BS EN 13459
BS EN 14034-3:2006/Amendment 1 Determination of the lower explosion limit LEL of dust clouds FSH/23/-/1
DD CEN/TS 14038:— BS EN 13481:— Railway applications. Track. Performance requirements for fastening systems
BS EN 13674:—
Electrochemical re-alkalisation and chloride extraction treatments for reinforced concrete
Railway applications. Track. Rail
DD CEN/TS 14038-2 BS EN 13481-1 (Revision) Definitions
Chloride extraction
BS EN 13674-1 (Revision)
will supersede BS EN 13481-1:2002
will supersede BS EN 13674-1:2003
RAE/2
RAE/2
BS EN 13481-2 (Revision)
GEL/603
Vignole railway rails 46 kg/m and above
BS EN 14078 (Revision) Liquid petroleum products. Determination of fatty methyl ester (FAME) content in middle distillates. Infrared spectrometry method
BS EN 13674-2:2006/Amendment 1
will supersede BS EN 14078:2003
will supersede BS EN 13481-2:2002
Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
PTI/2
RAE/2
RAE/2
Fastening systems for concrete sleepers
BS EN 14232 BS EN 13481-3 (Revision) Fastening systems for wood sleepers will supersede BS EN 13481-3:2002
BS EN 13674-3:2006/Amendment 1
Advanced technical ceramics. Terms, definitions and abbreviations
Check rails
will supersede DD ENV 14232:2003
RAE/2
RPI/13
RAE/2
BS EN 13674-4:2006/Amendment 1 BS EN 13481-4 (Revision) Fastening systems for steel sleepers
Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
will supersede BS EN 13481-4:2002
RAE/2
BS EN 14353:2007/Amendment 1 Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods B/544/2
RAE/2
BS EN 13481-5 (Revision) Fastening systems for slab track will supersede BS EN 13481-5:2002 RAE/2
BS EN 13732 (Revision)
PD CEN/TR 14383:—
Food processing machinery. Bulk milk coolers on farms. Requirements for construction, performance, suitability for use, safety and hygiene
Prevention of crime. Urban planning and design
will supersede BS EN 13732:2002
Petrol stations
AW/24
B/562
PD CEN/TR 14383-5
BS EN 13481-7 (Revision) Special fastening systems for switches and crossings and check rails
BS EN 13834:2007/Amendment 1
will supersede BS EN 13481-7:2003
Cookware. Ovenware for use in traditional domestic ovens
RAE/2
PD CEN/TR 14383-6 Schools B/562
CW/9
BS EN 14419 (Revision)
Founding. Austenitic cast irons
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
will supersede BS EN 13835:2002
will supersede BS EN 14419:2003
ISE/NFE/9
RHE/9
BS EN 13507 (Revision) Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying will supersede BS EN 13507:2001
BS EN 13835 (Revision)
STI/40
BS EN 14034:—
BS EN 14425:—
Determination of explosion characteristics of dust clouds
Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics
BS EN 14034-1:2004/Amendment 1
BS EN 14425-3
Visual inspection coding system
Determination of the maximum explosion pressure pmax of dust clouds
will supersede DD CEN/TS 14425-3:2003
B/505/22
FSH/23/-/1
BS EN 13508:— Conditions of drain and sewer systems outside buildings
BS EN 13508-2:2003/Amendment 1
34
Prices may be subject to change.
Chevron notched beam (CNB) method RPI/13
Update Standards Aug 2008
BS EN 14439:2006/Amendment 1
BS EN 15304 (Revision)
BS EN 15863
Cranes. Safety. Tower cranes
Determination of the freeze-thaw resistance of autoclaved aerated concrete
Characterization of waste. Leaching behaviour test for basic characterisation. Dynamic Monolithic Leaching Test with periodic leachant renewal under fixed test conditions
MHE/3/5
will supersede BS EN 15304:2007 B/523
B/508/3
BS EN 14566:2008/Amendment 1 Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods B/544/2
BS EN 14655:2005/Amendment 1 Food processing machinery. Baguette slicers. Safety and hygiene requirements MCE/3/5
BS EN 15416:— Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
BS EN 15416-3:2007/Amendment 1 Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
BS EN 15864 Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic Monolithic Leaching Test with continuous leachant renewal under conditions relevant for specified scenario(s) B/508/3
PRI/52
DD CEN/TS 15866
BS EN 14730:—
Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
Railway applications. Track. Aluminothermic welding of rails
DD CEN/TS 15436:—
BS EN 14730-1:2006/Amendment 1
DD CEN/TS 15436-3
Approval of welding processes
Classification
RAE/2
B/513
DD CEN/TS 15867
BS EN 14811:2006/Amendment 1
BS EN 15643:—
Railway applications. Track. Special purpose rail. Grooved and associated construction
Sustainability of construction works. Integrated assessment of building performance
Advanced technical ceramics. Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical test
Road service area maintenance equipment
RPI/13
RPI/13
RAE/2
BS EN 15643-4 BS EN 14993 Swap bodies for combined transport. Stackable swap bodies type A 1371. Dimensions, design requirements and testing will supersede DD CEN/TS 14993:2005 TW/1
Framework for the assessment of economic performance B/558
BS EN 15649:— Floating leisure articles for use on and in the water
BS EN 15267:— Air quality. Certification of automated measuring systems
BS EN 15649-4 Additional specific safety requirements and test methods for Class B devices
BS EN ISO 23275:— Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate
BS EN ISO 23275-1 Determination of the presence of cocoa butter equivalents will supersede BS ISO 23275-1:2006 AW/307
SW/136
BS EN 15267-4 Performance criteria and test procedures for automated measuring systems for monitoring ambient air quality EH/2/4
BS EN 15283:— Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods
BS EN ISO 23275-2 Quantification of cocoa butter equivalents
BS EN 15859 Air quality. Automated measuring systems. Performance criteria and test procedures for certain dust monitors and dust arrestment plant monitors
will supersede BS ISO 23275-2:2006 AW/307
EH/2/4
BS EN ISO 27107
BS EN 15860
Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
BS EN 15283-1:2008/Amendment 1
Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
Gypsum boards with mat reinforcement
PRI/21
will supersede BS ISO 27107:2008 AW/307
B/544/2
BS EN 15283-2:2008/Amendment 1 Gypsum fibre boards B/544/2
BS EN 15861
BS EN 50173:—
Food processing machinery. Smoke facilities. Safety and hygiene requirements
Information technology. Generic cabling systems
MCE/3/5
BS EN 15862
BS EN 50173-6
will supersede BS ISO 15303:2001
Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
Design of generic cabling within existing and new cabling structures in support service/application overlays rather than those explicitly detailed in the other premises-specific standards
AW/307
B/508/3
TCT/7
BS EN ISO 15303 Animal and vegetable fats and oils. Detection and identification of a volatile organic contaminant by GC/MS
Update Standards Aug 2008
Prices may be subject to change.
35
New Work Started continued... BS EN 60061:—
BS EN 61643-312
BS ISO/IEC 1989 (Revision)
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety
Performance specification for gas discharge tubes (GDT)
Information technology. Programming languages. COBOL
will supersede BS EN 61643-311:2001
will supersede BS ISO/IEC 1989:2002
PEL/37/1
IST/5
BS EN 61643-313
BS ISO 3951:—
BS EN 60061-1:1997/Amendment 42 Lamp caps and holders CPL/34/2
BS EN 60061-2:1997/Amendment 39 Lampholders
Selection and application principles for gas discharge tubes (GDT) will supersede BS EN 61643-311:2001 PEL/37/1
CPL/34/2
BS EN 61709 (Revision) Gauges
Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
CPL/34/2
will supersede BS EN 61709:2000
BS EN 60061-3:1997/Amendment 40
Sampling procedures for inspection by variables
BS ISO 3951-2:2006/Amendment 1 General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics SS/5
DS/1
BS ISO 4666:—
Guidelines and general information
BS EN 61760:—
Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing
CPL/34/2
Surface mounting technology
BS EN 60335:—
BS EN 61760-3
Compression flexometer
Household and similar electrical appliances. Safety
Standards methods for the specification of components for through hole reflow (THR) soldering
will supersede BS 903-A50:1984
BS EN 60061-4:1992/Amendment 12
BS ISO 4666-3
PRI/22
EPL/501
BS EN 60335-2-14:2006/Amendment 11
BS ISO 6914
Particular requirements for kitchen machines CPL/61/01
BS EN 80601:— Medical electrical equipment
BS EN 60439:— Low-voltage switchgear and controlgear assemblies
PRI/22
BS EN 80601-2-60 Particular requirements for basic safety and essential performance of dental equipment CH/62/1
BS EN 60439-3 (Revision) Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards will supersede BS EN 60439-3:1991
Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation
BS ISO 9270:— Tapers for spindle noses for automatic tool changers
DD CEN/TS 843:— Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature
PEL/17/3
BS ISO 9270-1 Dimensions and designation of spindle noses of forms S and SF MTE/15
DD CEN/TS 843-7 BS EN 60728:—
C-ring tests
Cable networks for television signals, sound signals and interactive services
RPI/13
BS EN 60728-1-1 RF cabling for two way home networks
BS ISO 9270-2 Dimensions and designation of spindle noses of forms J and JF
DD CEN/TS 843-8 Guidelines for conducting proof tests
MTE/15
RPI/13
EPL/100
BS ISO 10110:— BS EN 60728-13 Optical systems for broadcast signal transmissions
DD CEN/TS 843-9 Method of test for edge-chip resistance
Optics and photonics. Preparation of drawings for optical elements and systems
RPI/13
EPL/100
BS ISO 10110-8 (Revision) BS ISO/IEC 1539:—
Surface texture will supersede BS ISO 10110-8:1997
Low voltage surge protective devices
Information technology. Programming languages. Fortran
BS EN 61643-311 (Revision)
BS ISO/IEC 1539-1 (Revision)
Specification for gas discharge tubes (GDT)
Base language
BS ISO 10210
will supersede BS EN 61643-311:2001
will supersede BS ISO/IEC 1539-1:2004
Plastics. Preparation of test and reference materials for biodegradation testing
PEL/37/1
IST/5
PRI/21
BS EN 61643:—
36
Prices may be subject to change.
CPW/172/1
Update Standards Aug 2008
BS ISO/IEC 10373:—
BS ISO 11638
BS ISO 12769
Identification cards. Test methods
Resilient floor coverings. Heterogeneous polyvinyl chloride flooring foam. Specification
Wellness spas services
BS ISO/IEC 10373-8 USB-ICC IST/17
BS ISO 10676 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen RPI/13
BS ISO 14066 BS ISO 11665:— Measurement of radioactivity in the environment air
BS ISO 11665-2 Radon-222. Integrated measuring methods of the potential alpha energy concentration of short-lived radon decay products in the atmospheric environment NCE/2
RPI/13
BS ISO 10678 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in aqueous medium by degradation of methylene blue RPI/13
BS ISO 10845:—
Greenhouse gases. Competency requirements for greenhouse gas validators and verifiers SES/1/7
BS ISO/IEC 14543:— Information technology. Home Electronic System (HES) Architecture. Intelligent grouping and resource sharing for HES Class 2 & Class 3
BS ISO/IEC 14543-5-1
BS ISO 10677 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
SVS/2/-/2
PRI/3/60
Core protocol
BS ISO 11665-3
IST/6
Radon-222. Short-term measuring methods of the potential alpha energy concentration of short-lived radon decay products in the atmospheric environment
BS ISO/IEC 14882 (Revision)
NCE/2
will supersede BS ISO/IEC 14882:2003
Programming languages. C++ IST/5
BS ISO 11665-4 Radon-222. Integrated measuring methods of the average radon activity concentration in the atmospheric environment using passive sampling and delayed analysis
BS ISO/IEC 15026 (Revision) Information technology. System and software integrity levels will supersede BS ISO/IEC 15026:1998
NCE/2
IST/15
BS ISO 10845-1
BS ISO 11665-5
BS ISO 15031:—
Processes, methods and procedures
Radon-222. Continuous measuring methods of radon activity concentration in the atmospheric environment
Construction procurement
B/500
Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics
NCE/2
BS ISO/IEC 10967:—
BS ISO 15031-6 (Revision)
Information technology. Language independent arithmetic
BS ISO 11665-6
BS ISO/IEC 10967-1 (Revision)
Radon-222. Methods of estimating the exhalation surface rate by accumulation in the environment
Integer and floating point arithmetic
NCE/2
Diagnostic trouble code definitions will supersede BS ISO 15031-6:2005 AUE/16
BS ISO 16000:—
will supersede BS ISO/IEC 10967-1:1994
Indoor air
IST/5
BS ISO 11665-7 Elementary numerical functions
Radon-222. Short-term measuring methods of radon activity concentration in the atmospheric environment
will supersede BS ISO/IEC 10967-2:2001
NCE/2
BS ISO/IEC 10967-2 (Revision)
Complex integer and floating point arithmetic and complex elementary numerical functions
Determination of the emission of semi volatile organic compounds for building products. Micro-chamber method EH/2/3
IST/5
BS ISO/IEC 10967-3 (Revision)
BS ISO 16000-25
BS ISO 11665-8 Radon-222 in buildings. Methodologies for screening and additional investigations NCE/2
will supersede BS ISO/IEC 10967-3:2006
BS ISO 18874 Plastics. Determination of fracture toughness under plane-stress conditions PRI/21
IST/5
PD ISO/TR 11864 BS ISO 11063 Soil quality. Method to directly extract DNA from soil samples
Document management. Guidelines for the creation of a metadata crosswalk IDT/1/2
EH/4
e-mail
BS ISO 11938
will supersede BS ISO 11323:2002
Microbeam analysis. Electron probe microanalysis. Quantification method for elemental area analysis using wavelength dispersive spectroscopy
ISE/58
CII/9
BS ISO 11323 (Revision) Iron ore and direct reduced iron. Vocabulary
Update Standards Aug 2008
Prices may be subject to change.
your order
[email protected]
37
New Work Started continued... BS ISO/IEC 19796:—
BS ISO 24501
PD ISO/TR 28380:—
Information technology. Learning, education and training. Quality management, assurance and metrics
Guidelines for all people including elderly persons and persons with disabilities. Auditory signals on consumer products. Sound pressure levels of signals for the elderly and in noisy conditions
Health Informatics. IHE Global Standards Adoption
BS ISO/IEC 19796-2
PH/9/1
Integration and content profiles
Harmonized quality model
IST/35
IST/43
BS ISO 24502
BS ISO/IEC 20000:—
Guidelines for all people including elderly persons and persons with disabilities. Visual signs and displays. Specification of age-related relative luminance and its use in assessment of light
Information technology. Service management
PD ISO/TR 28380-2
BS ISO 29081 Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction CII/60
PH/9/1
BS ISO/IEC 20000-1 (Revision) Specification
BS ISO 24503
BS ISO/IEC 29104:—
will supersede BS ISO/IEC 20000-1:2005
Ergonomics. Marking tactile dots on consumer products. Guidelines for all people, including elderly persons and persons with disabilities
Information technology. Centralized Management Protocol (CMP) for Ubiquitous Home Network Services
IST/15/-/8
PH/9
BS ISO/IEC 29104-1
BS ISO/IEC 20000-2 (Revision) Code of practice will supersede BS ISO/IEC 20000-2:2005
BS ISO/IEC 24792 Session Management Protocol (MSMP)
Remote Management of Residential Gateways IST/6
IST/15/-/8
IST/6
BS ISO 21461:2006/Amendment 2
PD ISO/IEC TR 24796
Remote Management of Application Servers
Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
Information technology. Intelligent homes. Taxonomy of specifications
IST/6
PRI/23
IST/6
BS ISO/IEC 29104-2
BS ISO/IEC 29104-3 Remote Management of User Terminals
DD ISO/TS 21547:— Health informatics. Security requirements for archiving of electronic health records
PD ISO/IEC TR 24797
IST/6
Information technology. Terminology for intelligent homes
BS ISO/IEC 29105
IST/6
Information technology. Guidelines on the use of converged networks for customer premises
DD ISO/TS 21547-1 Principles and requirements IST/35
BS ISO/IEC 27002 (Revision) Information technology. Security techniques. Code of practice for information security management will supersede BS ISO/IEC 27002:2005 IST/33
PD ISO/TR 21547:— Health informatics. Security requirements for archiving of electronic health records
IT-Telecommunications cabling guidelines for remote powering of data terminal equipment TCT/7
IST/33
Guidelines IST/35
BS ISO/IEC 29125
BS ISO/IEC 27012 Information technology. Security techniques. ISM guidelines for e-government services
PD ISO/TR 21547-2
IST/6
BS ISO/IEC 29145:— Interconnection of Information Technology Equipment. WiBEEM Standard for Wireless Home Network Services
BS ISO/IEC 27035 Information technology. Security techniques. Information security incident management
BS ISO/IEC 29145-1
DD ISO/TS 22028:—
will supersede PD ISO/IEC TR 18044:2004
IST/6
Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange
IST/33
DD ISO/TS 22028-4 European Colour Initiative RGB colour image encoding [eciRGB (2008)]
PHY Layer Specifications
BS ISO/IEC 29145-2 PD ISO/IEC TR 27036
MAC Layer Specifications
Information technology. Security techniques. Information security incident management
IST/6
will supersede PD ISO/IEC TR 18044:2004
BS ISO/IEC 29145-3
IST/33
NWK Layer Specifications
CPW/42
IST/6
BS ISO/IEC 27037 BS ISO 24500 Guidelines for all people, including elderly persons and persons with disabilities. Auditory signals on consumer products PH/9/1
38
Information technology. Security techniques. Information security management. Sector to sector interworking and communications for industry and government
BS ISO 29281
will supersede PD ISO/IEC TR 18044:2004
Intelligent transport systems. Communications access for land mobiles (CALM). CALM non-IP networking
IST/33
EPL/278
Prices may be subject to change.
Update Standards Aug 2008
DD IEC/TS 62001 Guide to the specification and design evaluation of A.C. filters for high-voltage direct current (HVDC) systems will supersede DD IEC PAS 62001:2004
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – NATIONAL BRITISH STANDARDS
PEL/22
BS ISO/IEC 80600 Medical electrical equipment. Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph CH/121/5
PD ISO/IEC TR 12860 Next Generation Corporate Networks (NGCN). General IST/6
PD ISO/IEC TR 12861 Next Generation Corporate Networks (NGCN). Identification and Routing IST/6
PD ISO/IEC TR 24798 Information technology. Generic cabling. Introduction to the MICE environmental classification TCT/7
PD ISO/IEC TR 24799 Information technology. Guidelines on the use of converged networks for customer premises
You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting http://drafts.bsigroup.com. All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at http://drafts.bsigroup.com. The deadline for the following drafts is 30 September, 2008 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see ’How to order’ on page 2).
08/30140557 DC BS 8298-3 Code of practice for the design and installation of natural stone cladding and lining. Part 3. Stone-faced pre-cast concrete cladding systems B/545
08/30145245 DC NA to BS EN 1990 AMD1 UK National Annex to Eurocode 0. Basis of structural design B/525/1
08/30162761 DC BS 499-1 Welding terms and symbols. Part 1. Glossary for welding, brazing and thermal cutting £18.00 members, £36.00 non-members WEE/1
08/30166539 DC BS 6798 Specification for installation and maintenance of gas fired boilers of rated input not exceeding 70 kW net GSE/30
Comments for the above document are required by 31 August, 2008
08/30166965 DC BS 25777 Code of practice for ICT continuity BCM/1
Comments for the above document are required by 17 October, 2008
08/30171388 DC BS 8888 Technical product specification. Specification
IST/6
TDW/4
PAS 44
08/30019827 DC
Official identification eartags for cattle. Specification
BS 7996 Torque measuring devices. Calibration and classification using continual torque application. Method
will supersede PAS 44:2002
ISE/NFE/4
CEN Workshop 45
Comments for the above document are required by 17 October, 2008
Comments for the above document are required by 15 September, 2008
08/30177004 DC BS 6396 Electrical systems in office furniture and educational furniture. Specification FW/0
Specification and guidance for impact rated vehicle security barriers
08/30089959 DC BS 3998 Recommendations for tree work B/213
Help Us to Help
Comments for the above document are required by 31 October, 2008
Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
BS 2SP 90 Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series ACE/12
08/30185210 DC
You! Always quote your Customer Number
08/30178678 DC
08/30128156 DC NA to BS EN 1993-5 UK National Annex to Eurocode 3. Design of steel structures. Part 5. Piling
BS 8848 AMD1 Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom SVS/2/-/5
B/525/31
Comments for the above document are required by 15 September, 2008 e-mail
08/30129607 DC BS 8521 Specification for dual-tone multifrequency (DTMF) signalling protocol for social alarm systems (21TC)
your order
[email protected]
GW/1/12
Update Standards Aug 2008
Prices may be subject to change.
39
Draft British Standards for Public Comment
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below.
08/30140155 DC
08/30162072 DC
BS IEC 62438 Radiation protection instrumentation. Mobile instrumentation for measurement of photon and neutron radiation in the environment
BS EN 62507-1 Requirements for identification systems enabling unambiguous information interchange. Part 1. Principles and methods GEL/3
NCE/2
Comments for the above document are required by 31 October, 2008
08/30142528 DC BS ISO 26203-1 Metallic materials. Tensile testing method at high strain rates. Part 1. Elastic bar type system
08/30162354 DC BS ISO 24097-1 Using Web Services (machinemachine delivery) for ITS service delivery. Part 1. Realization of interoperable web services EPL/278
Comments for the above document are required by 31 October, 2008
ISE/NFE/4/1
08/30164878 DC Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 September, 2008 unless otherwise stated, to be considered by the relevant BSI committee.
BS EN ISO 25140 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
Draft standards may be modified before adoption and issue as British Standards.
08/30146238 DC
08/19974897 DC
IST/33
BS ISO 16269-4 Statistical interpretation of data. Part 4. Detection and treatment of outliers
Comments for the above document are required by 8 September, 2008
08/30142566 DC
B/517/1
08/30164881 DC
EH/2/1
BS EN 12350-2 Testing fresh concrete. Part 2. Slump test BS ISO/IEC 27000 Information technology. Security techniques. Information security management system. Overview and vocabulary
SS/2
Comments for the above document are required by 15 September, 2008
BS EN 12350-1 Testing fresh concrete. Part 1. Sampling
08/30153153 DC BS EN 15821 Multi firing sauna stoves fired by solid fuel. Requirements and test methods
B/517/1
08/30164884 DC BS EN 12350-3 Testing fresh concrete. Part 3. Vebe test B/517/1
08/30164887 DC BS EN 12350-4 Testing fresh concrete. Part 4. Degree of compactability B/517/1
RHE/28
08/30084134 DC BS ISO 22538-5 Space systems. Oxygen safety. Part 5. Operational and emergency procedures
08/30157012 DC
ACE/68
BS ISO 28640 Random variate generation methods
08/30164890 DC BS EN 12350-5 Testing fresh concrete. Part 5. Flow table test B/517/1
SS/5
08/30091038 DC BS ISO/IEC 19792 Information technology. Security techniques. Security evaluation of biometrics IST/33
Comments for the above document are required by 8 September, 2008
Comments for the above document are required by 15 September, 2008
BS EN 12350-6 Testing fresh concrete. Part 6. Density
08/30158227 DC BS EN ISO 21258 Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide. Reference method. Nondispersive infrared method EH/2/1
IST/33
B/517/1
08/30164896 DC BS EN 12350-7 Testing fresh concrete. Part 7. Air content. Pressure methods B/517/1
08/30134763 DC BS ISO/IEC 27004 Information technology. Security techniques. Information security management. Measurement
08/30164893 DC
08/30159339 DC BS EN 12668-1 Non-destructive testing. Characterization and verification of ultrasonic testing equipment. Part 1. Instruments WEE/46
08/30164902 DC BS EN 12390-2 Testing hardened concrete. Part 2. Making and curing specimens for strength tests B/517/1
08/30135616 DC BS EN 1708-1 Welding. Basic welded joint details in steel. Part 1. Pressurized components WEE/39
08/30159342 DC BS EN 12668-2 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Part 2. Probes WEE/46
08/30164905 DC BS EN 12390-3 Testing hardened concrete. Part 3. Compressive strength of test specimens B/517/1
08/30139611 DC 08/30164908 DC
BS ISO/IEC 17007 Conformity assessment. Guidelines for drafting normative documents suitable for use for conformity assessment
08/30159958 DC BS EN 338 Structural timber. Strength classes
BS EN 12390-5 Testing hardened concrete. Part 5. Flexural strength of test specimens
CAS/1
B/518
B/517/1
40
Prices may be subject to change.
Update Standards Aug 2008
08/30164911 DC
08/30169975 DC
08/30173486 DC
BS EN 12390-7 Testing hardened concrete. Part 7. Density of hardened concrete
BS ISO 26382 Cogeneration systems. Technical declarations for planning
B/517/1
MCE/16
BS EN 61606-2 Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics. Part 2. Consumer use EPL/100
08/30164914 DC BS EN 12390-8 Testing hardened concrete. Part 8. Depth of penetration of water under pressure B/517/1
08/30164917 DC
08/30170500 DC BS EN 60601-2-33 Medical electrical equipment. Part 2-33. Particular requirements for basic safety and essential performance of magnetic resonance equipment for medical diagnosis £18.00 members, £36.00 non-members
BS EN 12504-1 Testing concrete in structures. Part 1. Cored specimens. Taking, examining and testing in compression
CH/62/2
B/517/1
08/30171383 DC
08/30165047 DC BS EN ISO 9906 Rotodynamic pumps. Hydraulic performance acceptance tests
08/30174059 DC BS ISO 81060-2 Non-invasive sphygmomanometers. Part 2. Clinical validation of automated measurement type CH/121/5
08/30174283 DC
BS EN 12871 Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
BS ISO 10130 Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivitisation
B/541
CW/217
Comments for the above document are required by 31 October, 2008
MCE/6
08/30171597 DC 08/30165875 DC BS ISO/IEC 18000-6 Information technology. Radio frequency identification for item management. Part 6. Parameters for air interface communications at 860 MHz to 960 MHz £33.00 members, £66.00 non-members IST/34
08/30166039 DC BS ISO 17824 Petroleum and natural gas industries. Downhole equipment. Sand-control screens
BS EN 61753-111-7 Fibre optic interconnecting devices and passive components. Performance standard. Part 111-7. Sealed closures for Category A. Aerial
BS ISO 4691 Iron ores. Determination of titanium content. Diantipyrylmethane spectrophotometric method
GEL/86/2
ISE/58
08/30171606 DC
08/30178316 DC
08/30177243 DC
BS EN 61753-111-8 Fibre optic interconnecting devices and passive components. Performance standard. Part 111-8. Sealed closures for Category G. Ground
BS EN 1870-1 AMD1 Safety of woodworking machines. Circular sawing machines. Part 1. Circular saw benches (with and without sliding table), dimension saws and building site saws
GEL/86/2
MTE/23
PSE/17/-/4
08/30166255 DC BS IEC 60965 Nuclear power plants. Control rooms. Supplementary control points for reactor shutdown without access to the main control room
08/30171613 DC BS EN 61753-111-9 Fibre optic interconnecting devices and passive components. Performance standard. Part 111-9. Closures for Category S. Subterranean
BS EN 1870-3 AMD1 Safety of woodworking machines. Circular sawing machines. Part 3. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
GEL/86/2
MTE/23
NCE/8
08/30167713 DC
08/30172575 DC
BS ISO 6944-2 Fire containment. Elements of building construction. Part 2. Kitchen extract ducts
BS EN 1168 AMD2 Precast concrete products. Hollow core slabs B/524
FSH/22/9
Comments for the above document are required by 31 October, 2008
08/30168345 DC BS ISO 15136-1 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 1. Pumps £18.00 members, £36.00 non-members PSE/17/-/4
Comments for the above document are required by 31 October, 2008
08/30178319 DC
08/30178819 DC BS EN 13384-2 AMD1 Chimneys. Thermal and fluid dynamic calculation methods. Part 2. Chimneys serving more than one heating appliance B/506
08/30179319 DC 08/30173423 DC BS EN 60601-2-5 Medical electrical equipment. Part 2-5. Particular requirements for basic safety and essential performance of ultrasonic physiotherapy equipment
BS EN 15559 Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd CII/37
CH/62/4
08/30179322 DC
Comments for the above document are required by 31 October, 2008
BS EN 15560 Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free CII/37
08/30169505 DC BS ISO/IEC 13888-1 Information technology. Security techniques. Non-repudiation. Part 1. General IST/33
Comments for the above document are required by 1 October, 2008
Update Standards Aug 2008
08/30173482 DC BS EN 61606-1 Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics. Part 1. General
08/30179326 DC
EPL/100
CII/37
Prices may be subject to change.
BS EN 15561 Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
41
Draft British Standards for Public Comment continued... 08/30179329 DC
08/30180156 DC
08/30180838 DC
BS EN 15562 Fertilizers. Determination of cyanamide nitrogen
BS EN 10264-4 Steel wire and wire products. Steel wire for ropes. Part 4. Stainless steel wire
CII/37
ISE/26
BS EN 10245-2 Steel wire and wire products. Organic coatings on steel wire. Part 2. PVC finished wire ISE/26
08/30179332 DC
08/30180264 DC
BS EN 15604 Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS EN 13942 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves PSE/17
CII/37
08/30180841 DC BS EN 10245-3 Steel wire and wire products. Organic coatings on steel wire. Part 3. PE coated wire ISE/26
08/30180281 DC 08/30179692 DC BS EN 791 AMD2 Drill rigs. Safety B/513/2
BS EN 1966 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method PRI/52
08/30180844 DC BS EN 10245-4 Steel wire and wire products. Organic coatings on steel wire. Part 4. Polyester coated wire ISE/26
08/30180072 DC BS EN ISO 13967 Thermoplastics fittings. Determination of ring stiffness PRI/88/4
08/30180284 DC BS EN 1465 Adhesives. Determination of tensile lap-shear strength of bonded assemblies PRI/52
BS EN 13476-3 AMD1 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 3. Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
08/30180463 DC
PRI/88/1
08/30180499 DC
Comments for the above document are required by 30 August, 2008
BS EN 15823 Packaging. Braille on packaging for medicinal products
BS EN 15825 Textile floor coverings. Classification of machine-made rugs and runners without pile PRI/3/60
ISE/26
08/30180144 DC BS EN 10244-2 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Part 2. Zinc or zinc alloy coatings ISE/26
08/30180850 DC BS EN 10270-1 Steel wire for mechanical springs. Part 1. Patented cold drawn unalloyed spring steel wire ISE/26
PKW/0/-/5
BS EN 10244-1 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Part 1. General principles
BS EN 10245-5 Steel wire and wire products. Organic coatings on steel wire. Part 5. Polyamide coated wire ISE/26
08/30180138 DC
08/30180141 DC
08/30180847 DC
08/30180723 DC BS ISO 9682-1 Iron ores. Determination of manganese content. Part 1. Flame atomic absorption spectrometric method
08/30180853 DC BS EN 10270-2 Steel wire for mechanical springs. Part 2. Oil hardened and tempered spring steel wire ISE/26
08/30180856 DC BS EN 10270-3 Steel wire for mechanical springs. Part 3. Stainless spring steel wire
ISE/58
ISE/26
08/30180726 DC BS ISO 9683-2 Iron ores. Determination of vanadium. Part 2. Flame atomic absorption spectrometric methods ISE/58
08/30180859 DC BS EN 10218-1 Steel wire and wire products. General. Part 1. Test methods ISE/26
08/30180147 DC BS EN 10264-1 Steel wire and wire products. Steel wire for ropes. Part 1. General requirements ISE/26
08/30180150 DC BS EN 10264-2 Steel wire and wire products. Steel wire for ropes. Part 2. Cold drawn non alloy steel wire for ropes for general applications ISE/26
08/30180729 DC BS ISO 11533 Iron ores. Determination of cobalt content. Flame atomic absorption spectrometric method
08/30180862 DC
ISE/58
ISE/26
BS EN 10218-2 Steel wire and wire products. General. Part 2. Wire dimensions and tolerances
Comments for the above document are required by 31 August, 2008
08/30181044 DC 08/30180829 DC BS EN 15826 Vitreous and porcelain enamels. Terminology
BS EN 15828 Hardware for furniture. Strength and durability of hinges and their components. Stays and hinges pivoting on a horizontal axis FW/0/1
STI/36
08/30181049 DC
08/30180153 DC BS EN 10264-3 Steel wire and wire products. Steel wire for ropes. Part 3. Round and shaped non alloyed steel wire for high duty applications
08/30180835 DC BS EN 10245-1 Steel wire and wire products. Organic coatings on steel wire. Part 1. General rules
BS EN 1143-1 AMD1 Secure storage units. Requirements, classification and methods of test for resistance to burglary. Part 1. Safes, ATM safes, strongroom doors and strongrooms
ISE/26
ISE/26
GW/2
42
Prices may be subject to change.
Update Standards Aug 2008
08/30181440 DC
08/30183256 DC
08/30183838 DC
BS EN 622-4 Fibreboards. Specifications. Part 4. Requirements for softboards
BS ISO 11363-2 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 2. Inspection gauges
BS EN ISO 11148-4 Hand-held non-electric power tools. Safety requirements. Part 4. Nonrotary percussive power tools
PVE/3/1
MCE/8/-/2
B/541
Comments for the above document are required by 31 October, 2008
Comments for the above document are required by 31 August, 2008
08/30183287 DC 08/30181443 DC BS EN 622-5 Fibreboards. Specifications. Part 5. Requirements for dry process boards (MDF) B/541
Comments for the above document are required by 31 October, 2008
BS ISO 12625-12 Tissue paper and tissue products. Part 12. Determination of tensile strength of perforated lines. Calculation of perforation efficiency PAI/11
BS EN 1069-1 Water slides. Part 1. Safety requirements and test methods SW/136
Comments for the above document are required by 31 October, 2008
08/30181449 DC BS EN 1069-2 Water slides. Part 2. Instructions SW/136
Comments for the above document are required by 31 October, 2008
BS EN ISO 11148-6 Hand-held non-electric power tools. Safety requirements. Part 6. Assembly power tools for threaded fasteners MCE/8/-/2
08/30183443 DC 08/30181446 DC
08/30183842 DC
BS EN 55014-1 AMD2 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 1. Emission. Inclusion of induction cooking appliances GEL/210/11
08/30183518 DC BS EN 61000-4-3 AMD Electromagnetic compatibility (EMC). Part 4-3. Testing and measurement techniques. Radiated, radiofrequency, electromagnetic field immunity test. Interpretation of Clause 5 GEL/210/12
Comments for the above document are required by 31 August, 2008
08/30183905 DC BS ISO/IEC 14496-4 AMD35 Information technology. Coding of audio-visual objects. Part 4. Conformance testing IST/37
08/30183914 DC BS EN 60358-1 Coupling capacitors and capacitor dividers. Part 1. Common clauses PEL/33
08/30181461 DC BS EN 15830 Rough terrain variable reach trucks. Visibility. Test methods and verification MHE/7
08/30181799 DC BS EN 15835 Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column clean up AW/-/3
Comments for the above document are required by 31 October, 2008
08/30181802 DC BS EN 15829 Foodstuffs. Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs. HPLC method with immunoaffinity column cleanup and fluorescence detection AW/-/3
08/30182461 DC
08/30183566 DC BS ISO 11148-3 Hand-held non-electric power tools. Safety requirements. Part 3. Drills and tappers MCE/8/-/2
Comments for the above document are required by 31 August, 2008
Comments for the above document are required by 12 August, 2008
08/30183918 DC BS EN 60335-2-14 AMD Household and similar electrical appliances. Safety. Part 2-14. Particular requirements for kitchen machines CPL/61/01
08/30183606 DC BS EN 60335-2-109 Household and similar electrical appliances. Safety. Part 2-109. Particular requirements for UV radiation water treatment appliances CPL/61/01
08/30183921 DC BS EN 60335-2-97 AMD Household and similar electrical appliances. Safety. Part 2-97. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment CPL/61/01
08/30183769 DC BS EN 61340-4-6 Electrostatics. Part 4-6. Standard test methods for specific applications. Wrist straps GEL/101
BS ISO 20369 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content
08/30183777 DC
AW/40
GEL/101
08/30182464 DC
08/30183784 DC
BS ISO 20370 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content
BS ISO/IEC 20926 Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
BS IEC 61340-4-8 Electrostatics. Part 4-8. Standard test methods for specific applications. Discharge shielding. Bags
08/30183936 DC BS EN 61987-10 Industrial-process measurement and control. Data structures and element process equipment catalogues. Part 10. Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals AMT/7
08/30183974 DC BS EN 31010 Risk management. Risk assessment techniques DS/1
Comments for the above document are required by 31 August, 2008
IST/15
AW/40
08/30183795 DC 08/30183252 DC BS ISO 11363-1 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 1. Specifications
BS EN 62271-106 High-voltage switchgear and controlgear. Part 106. Alternating current contactors, contactor-based controllers and contactor-based motor-starters
PVE/3/1
PEL/17/1
Update Standards Aug 2008
Prices may be subject to change.
08/30184142 DC BS EN ISO 12499 Industrial fans. Mechanical safety of fans. Guarding RHE/2
Comments for the above document are required by 10 August, 2008
43
Draft British Standards for Public Comment continued... 08/30184146 DC
08/30184200 DC
08/30184415 DC
BS EN ISO 5801 Industrial fans. Performance testing using standardized airways
BS ISO 29805 Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes
BS EN 60851-5 AMD1 Winding wires. Test methods. Part 5. Electrical properties
B/540/8
Comments for the above document are required by 31 August, 2008
RHE/2
Comments for the above document are required by 10 August, 2008
GEL/55
08/30184210 DC 08/30184150 DC BS EN ISO 5802 Industrial fans. Performance testing in situ
BS EN ISO 81714-1 Design of graphical symbols for use in the technical documentation of products. Part 1. Basic rules
08/30184419 DC
RHE/2
TDW/4
GEL/55
Comments for the above document are required by 10 August, 2008
BS EN 60851-1 AMD2 Winding wires. Test methods. Part 1. General Comments for the above document are required by 31 August, 2008
08/30184317 DC 08/30184154 DC BS EN ISO 13349 Industrial fans. Vocabulary and definitions of categories RHE/2
Comments for the above document are required by 10 August, 2008
08/30184158 DC BS EN ISO 13350 Industrial fans. Performance testing of jet fans
BS ISO 8139 Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod end spherical eyes MCE/18/-/3
CH/212
BS ISO 8140 Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod end clevis MCE/18/-/3
08/30184338 DC
08/30184162 DC
BS ISO/IEC 23000-11 Information technology. Multimedia application format (MPEG-A). Part 11. Stereoscopic video application format
BS EN ISO 13351 Industrial fans. Dimensions
IST/37
RHE/2
BS ISO 8143 Thermal insulation products for building equipment and industrial installations. Calcium silicate products B/540/8
08/30184343 DC BS ISO/IEC 19763-3 Information technology. Metamodel framework for interoperability (MFI). Part 3. Metamodel for ontology registration IST/40
Comments for the above document are required by 21 August, 2008
Comments for the above document are required by 31 August, 2008
08/30184169 DC BS EN 61243-3 Live working. Voltage detectors. Part 3. Two-pole low-voltage type PEL/78
08/30184522 DC BS ISO 2129 Geometrical Product Specifications (GPS). Indication of dimensions and tolerances. Mechanical engineering drawings TDW/4
Comments for the above document are required by 10 August, 2008
08/30184166 DC
BS EN ISO 1135-4 Transfusion equipment for medical use. Part 4. Transfusion sets for single use
08/30184322 DC
RHE/2
Comments for the above document are required by 10 August, 2008
08/30184486 DC
08/30184542 DC BS EN 3155-076 Aerospace series. Electrical contacts used in elements of connection. Part 076. Contacts, electrical, male, type A, crimp, class R. Product standard ACE/6
08/30184545 DC BS EN 3155-077 Aerospace series. Electrical contacts used in elements of connection. Part 077. Contacts, electrical, female, type A, crimp, class R. Product standard ACE/6
08/30184354 DC
08/30184548 DC
BS ISO/IEC 23001-4 Information technology. MPEG systems technologies. Part 4. Codec configuration representation £18.00 members, £36.00 non-members
BS EN 6049-002 Aerospace series. Electrical cables, installation. Protection sleeves in metaaramid fibres. Part 002. General and list of product standard ACE/6
IST/37
08/30184178 DC 08/30184355 DC
BS EN 61400-25-6 Wind turbines. Part 25-6. Communications for monitoring and control of wind power plants. Logical node classes and data classes for condition monitoring
BS ISO/IEC 23002-4 Information technology. MPEG video technologies. Part 4. Video tool library
PEL/88
IST/37
08/30184551 DC BS EN 50329 AMD1 Railway applications. Fixed installations. Traction transformers GEL/9/3
08/30184557 DC
BS ISO 8894-1 Refractory materials. Determination of thermal conductivity. Part 1. Hot-wire (cross-array) and resistance thermometer methods
BS EN 62271-111 High-voltage switchgear and controlgear. Part 111. Pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV £18.00 members, £36.00 non-members
RPI/1
PEL/17/1
08/30184193 DC BS ISO 29803 Thermal insulation products for building applications. Determination of the resistance to impact of external thermal insulation composite systems (ETICS) B/540/8
08/30184395 DC
08/30184196 DC BS ISO 29804 Thermal insulation products for building applications. Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material B/540/8
44
08/30184562 DC 08/30184405 DC BS EN 62532 Fluorescent induction lamps. Safety requirements
BS EN 62271-103 High-voltage switchgear and controlgear. Part 103. Switches for rated voltages above 1 kV up to and including 52 kV
CPL/34/1
PEL/17/1
Prices may be subject to change.
Update Standards Aug 2008
08/30184566 DC
08/30184762 DC
08/30185108 DC
BS ISO 21931-1 Sustainability in building construction. Framework for methods of assessment for environmental performance of construction works. Part 1. Buildings
BS EN 61300-2-24 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-24. Tests. Screen testing of ceramic alignment split sleeve by stress application
BS EN 4604-008 Aerospace series. Cable, electrical, for signal transmission. Part 008. Cable, coaxial, 50 ohms, 200°, Type WD. Product standard
GEL/86/2
Comments for the above document are required by 31 October, 2008
B/558
08/30184575 DC BS EN ISO 787-7 General methods of test for pigments and extenders. Part 7. Determination of residue on sieve. Water method. Manual procedure STI/1
08/30184583 DC BS IEC/TS 60034-18-32 Rotating electrical machines. Part 18-32. Functional evaluation of insulation systems. Test procedures for formwound windings. Electrical evaluation of insulation systems used in rotating electrical machines B/540/8
08/30184585 DC BS EN ISO 3924 Petroleum products. Determination of boiling range distribution. Gas chromatography method PTI/13
ACE/6
08/30184786 DC BS ISO/IEC 26513 Software and systems engineering. Requirements for assessors and testers of user documentation IST/15
08/30184911 DC BS EN 62365 Digital audio. Digital inputoutput interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks EPL/100
Comments for the above document are required by 31 October, 2008
08/30184920 DC BS EN 60034-18-31 Rotating electrical machines. Part 18-31. Functional evaluation of insulation systems. Test procedures for formwound windings. Thermal evaluation and classification of insulation systems used in rotating machines
08/30185130 DC BS EN 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 42. Part 2. Lampholders. Amendment 39. Part 3. Gauges. Amendment 40. Part 4. Guidelines and general information. Amendment 12 CPL/34/2
Comments for the above document are required by 31 October, 2008
08/30185152 DC BS EN 60335-2-97 AMD1 Household and similar electrical appliances. Safety. Part 2-97. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment CPL/61/01
Comments for the above document are required by 31 October, 2008
PEL/2
08/30184667 DC BS EN ISO 2062 Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester TCI/24
08/30184703 DC BS EN 50164-5 Lightning Protection Components (LPC). Part 5. Requirements for earth electrode inspection housings and earth electrode seals GEL/81
Comments for the above document are required by 31 October, 2008
08/30185179 DC
08/30184950 DC
ACE/12
BS EN 50291-1 Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1. Test methods and performance requirements GEL/31
Comments for the above document are required by 31 October, 2008
08/30185105 DC
BS ISO 6145-5 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 5. Capillary calibration devices
BS EN 50377-15-1 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 15-1. Type MPO with PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
PTI/15
GEL/86/2
08/30184727 DC
08/30184738 DC
Comments for the above document are required by 31 October, 2008
BS EN 4673-001 Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 001. Installation and removal procedure
08/30185184 DC BS EN 4673-002 Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 002. Design standard ACE/12
08/30185194 DC BS EN 60335-2-40 AMD2 Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers CPL/61/4
Comments for the above document are required by 31 October, 2008
08/30185221 DC BS ISO 8811 Earth-moving machinery. Rollers and land-fill compactors. Terminology and commercial specifications
BS EN 353-1 Personal protective equipment against falls from a height. Part 1. Guided type fall arresters including a rigid anchor line
B/513/1
PH/5
Please 08/30184746 DC BS ISO 22199 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
do not send confirmation of
MHE/4
orders placed by 08/30184758 DC BS EN 378-1 AMD1 Refrigerating systems and heat pumps. Safety and environmental requirements. Part 1. Basic requirements, definitions, classification and selection criteria
BS EN 4673-004 Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 004. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating ACE/12
telephone as it can lead to duplication
RHE/18
Update Standards Aug 2008
08/30185224 DC
08/30185229 DC BS EN ISO 25745-1 Energy performance of lifts and escalators. Part 1. Energy measurement and conformance MHE/4
Prices may be subject to change.
45
Draft British Standards for Public Comment continued... 08/30185233 DC
08/30185468 DC
EN ISO 7328
BS EN 4673-005 Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 005. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
BS ISO/IEC 20926 Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
ACE/12
Comments for the above document are required by 31 October, 2008
IST/15
08/30185236 DC 08/30185588 DC
BS EN 4673-006 Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 006. In heat resisting steel FE-PA2601 (A286), MoS2 coated
BS ISO 8153-1 Aerospace. Fluid systems and components. Part 1. Terminology of hose assemblies
ACE/12
ACE/69
Comments for the above document are required by 31 October, 2008
08/30185258 DC BS EN 60269-5 Low-voltage fuses. Part 5. Guidance for the application of low-voltage fuses PEL/32
Comments for the above document are required by 31 October, 2008
08/30185263 DC BS EN 62271-102 AMD1 High-voltage switchgear and controlgear. Part 102. Alternating current disconnectors and earthing switches PEL/17/1
Comments for the above document are required by 31 October, 2008
ACE/6
Comments for the above document are required by 17 October, 2008
EPL/278
BS ISO 10643 Dimensions of accessories for cutting tools and their attachments MTE/5
Comments for the above document are required by 31 October, 2008
BS EN ISO 10360-7 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 7. CMMs equipped with imaging probing systems TDW/4
Comments for the above document are required by 31 October, 2008
DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000
EPL/278
Comments for the above document are required by 31 October, 2008
EN ISO 1736 Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS EN 55035 Electromagnetic Compatibility (EMC). Immunity standard for multimedia products GEL/210/11
Comments for the above document are required by 31 October, 2008
46
Particular requirements for spin extractors IEC/TC 61 has issued a sixth edition of IEC 60335-2-4 as a Final Draft International Standard. This will cancel and replace the fifth edition published in 2002 together with its amendments 1 (2004) and 2 (2006) and constitutes a technical revision. Its main changes are alignment of the text with IEC 60335-1 Edition 4.2, clarification of criteria for the protection against mechanical hazards for double lid appliances (in clauses 20.103 and 20.104) and conversion of notes to normative text in clauses 1, 20.102 and Annex AA. If agreed this will be implemented by BSI as a revision of BS EN 60335-2-4:2002. Contact: Geraldine Salt Email:
[email protected] CPL/61/14
ISO 488
The above draft has been circulated as a ISO/FDIS. This second edition cancels and replaces the first edition (ISO 488:1983). Copies are available on request from the contact point (below). Contact: Committee Service Centre Email:
[email protected] AW/5
ISO 2898:— EN ISO 1854 Whey cheese. Determination of fat content. Gravimetric method (Reference method)
Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials
ISO 2898-2 EN ISO 2450
08/30185354 DC
Household and similar electrical appliances. Safety
Milk. Determination of fat content. Gerber butyrometers
EN ISO 1737
BS ISO 15622 Transport information and control systems. Adaptive cruise control systems. Performance requirements and test procedures
IEC 60335:—
IEC 60335-2-4 08/30185684 DC
Comments for the above document are required by 31 October, 2008
08/30185313 DC
These standards have been circulated to members as Final Draft International Standards (FDIS) documents by ISO/TC34/SC5. They incorporate minor revisions to the earlier versions of the International Standards. Contact: Committee Service Centre Email:
[email protected] AW/5
08/30185306 DC BS ISO 17386 Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method)
08/30185600 DC
08/30185299 DC BS EN 6049-006 Aerospace series. Electrical cables, installation. Protection sleeve in metaaramid fibres. Part 006. Self-wrapping protective sleeve, flexible post installation. Product standard
EN ISO 8381
Cream. Determination of fat content. Gravimetric method (Reference method)
EN ISO 7208 Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method)
Prices may be subject to change.
Preparation of test specimens and determination of properties The above draft has been circulated for ISO/FDIS. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email:
[email protected] PRI/82
Update Standards Aug 2008
ISO 3302:—
prEN 3388
EN 474-5:2006/Amendment 1
Rubber. Tolerances for products
Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa/650°C. Manufacturing method optional. Technical specification
Requirements for hydraulic excavators
ISO 3302-2 Geometrical tolerances A copy of the above document is available from the contact point (below). Contact: Committee Service Centre Email:
[email protected] PRI/73
ISO 10242:— Tools for pressing. Punch holder shanks
ISO 10242-2 Type C
ISO 10242-3
prEN 3389 Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification These documents have now been issued as Final Drafts. To view the drafts, please email the contact point (below). Contact: Committee Service Centre Email:
[email protected] ACE/12
Type D ISO 10242 Parts 2 and 3 have been circulated at final draft (FDIS) stage. These have not previously been issued as DPC’s as they constitute only minor revisions of earlier editions. Copies of the texts are available from the contact point (below). Contact: Committee Service Centre Email:
[email protected] MTE/12
This document, which will not be issued as a Draft for Public Comment, amends BS EN 4745:2006. The amendment updates the normative references, modifies the requirement for Falling Object Protective Structures (FOPS) to include walking excavators, clarifies the requirement for the minimum performance of the swing service brake and adds informative annex ZB, which latter explains the relationship of the standard to the revised Machinery Directive 2006/42/EC. Please submit any comments by 30 September, 2008 to the Programme Manager (below). Contact: Mike Hodson Email:
[email protected] B/513/1
EN 474-6:2006/Amendment 1 Requirements for hydraulic excavators
CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000
ISO 11602:— Fire protection. Portable and wheeled fire extinguishers
This document, which will not be issued as a Draft for Public Comment, amends BS EN 4746:2006. The amendment adds the requirement for compact dumpers fitted with cabs to have Falling Object Protective Structures (FOPS) fitted and adds informative annex ZB, which latter explains the relationship of the standard to the revised Machinery Directive 2006/42/EC. Please submit any comments by 30 September, 2008 to the Programme Manager (below). Contact: Mike Hodson Email:
[email protected] B/513/1
EN 474:— ISO 11602-1
Earth-moving machinery. Safety
This is a revision of the first edition (ISO 116021:2000). There is no intention to adopt this standard in the UK as a BS ISO. A copy of this draft is available from the Programme Manager (below). Comments are invited by 31 October, 2008. Contact: Beverley Webb Email:
[email protected] FSH/2
ISO 11602-2 Inspection and maintenance This is a revision of the first edition (ISO 116022:2000). There is no intention to adopt this standard in the UK as a BS ISO. A copy of this draft is available from the Programme Manager (below). Comments are invited by 31 October, 2008. Contact: Beverley Webb Email:
[email protected]
EN 474-3:2006/Amendment 1 Requirements for loaders
B/513/1
EN 474-4:2006/Amendment 1 Requirements for backhoe loaders
This standard has been circulated by ISO at final draft (FDIS) stage. The text of the draft is available from the contact point (below). Contact: Committee Service Centre Email:
[email protected] NFE/36
B/513/1
ISO 12745 Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques
Update Standards Aug 2008
EN 474-8:2006/Amendment 1 Requirements for graders
This document, which will not be issued as a Draft for Public Comment, amends BS EN 4743:2006. The amendment updates the normative references, modifies the requirement for Falling Object Protective Structures (FOPS) to include machines under 700 kg and adds informative annex ZB, which latter explains the relationship of the standard to the revised Machinery Directive 2006/42/EC. Please submit any comments by 30 September, 2008 to the Programme Manager (below). Contact: Mike Hodson Email:
[email protected]
This document, which will not be issued as a Draft for Public Comment, amends BS EN 4744:2006. The amendment updates the normative references, modifies the requirement for Falling Object Protective Structures (FOPS) to include machines under 700 kg, corrects crossreferencing and adds informative annex ZB, which latter explains the relationship of the standard to the revised Machinery Directive 2006/42/EC. Please submit any comments by 30 September, 2008 to the Programme Manager (below). Contact: Mike Hodson Email:
[email protected]
FSH/2
EN 474-7:2006/Amendment 1 Requirements for scrapers
Selection and installation
Prices may be subject to change.
EN 474-9:2006/Amendment 1 Requirements for pipelayers
EN 474-10:2006/Amendment 1 Requirements for trenchers These documents, which will not be issued as Drafts for Public Comment, amend the equivalent current UK implementations. The amendments update the normative references and add informative annex ZB, which latter explains the relationship of the standards to the revised Machinery Directive 2006/42/EC. Please submit any comments by 30 September, 2008 to the Programme Manager (below). Contact: Mike Hodson Email:
[email protected] B/513/1
EN 12635:2002/Amendment 1 Industrial, commercial and garage doors and gates. Installation and use Copies are available on request from the contact point (below). Please note that there is no DPC for this. Contact: Committee Service Centre Email:
[email protected] B/538/5
47
CEN/CENELEC Unique Acceptance Procedure continued... EN ISO 12777:—
prEN ISO 11553:—
prEN 12350-7
Methods of test for pallet joints
Safety of machinery. Laser processing machines
Air content. Pressure methods
prEN ISO 11553-1
prEN 12390:—
General safety requirements
Testing hardened concrete
prEN ISO 11553-2
prEN 12390-2
Safety requirements for hand-held laser processing devices
Making and curing specimens for strength tests
These documents, which will not be issued as Draft for Public Comment, are identical to ISO 11553-1:2005 and ISO 11553-2:2007. They have been circulated to CEN members for voting. Please submit any comments by 5 September, 2008 to the Programme Manager (below). Contact: Sue Barden Email:
[email protected]
prEN 12390-3
CPW/172/9
Density of hardened concrete
EN ISO 12777-1:1996/Amendment 1 Determination of bending resistance of pallet nails, other dowel-type fasteners and staples This document, which will not be issued as a Draft for Public Comment, is identical to ISO 12777-1:1994/FDAM 1:2008 and has been circulated to CEN members for voting. Please submit any comments by 12 August, 2008 to the Programme Manager (below). Contact: Caroline Langdon Email:
[email protected] PKW/0/-/11
EN 13102:2005/Amendment 1 Ceramic machines. Safety. Loading and unloading of fine clay tiles A copy of the above document is available from the contact point (below). Contact: Committee Service Centre Email:
[email protected] MCE/3/14
prEN ISO 4528 Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
ISO 11348-1:2007
ISO 11348-3:2007 Method using freeze-dried bacteria The UK approved of these three reference ISO documents as drafts and is proposing to support their adoption as European standards. Contact: Roger Wellings Email:
[email protected]
Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry BSI intends to submit UK votes for the European adoption of the above standards since they have already been implemented as British Standards. Contact: Committee Service Centre Email:
[email protected] STI/36
prEN 12350:—
Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio)
Testing fresh concrete
prEN 12350-1 Sampling
prEN 12350-2 Slump test
EH/3/5
Non-destructive testing. Ultrasonic examination
Depth of penetration of water under pressure
prEN 12504-1
ISO 15088:2007
prEN 583:—
prEN 12390-8
Testing concrete in structures
EH/3/5
The UK approved of this reference ISO document at draft stage and is proposing to support adoption as a European standard. Contact: Roger Wellings Email:
[email protected]
prEN 12390-7
Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
prEN ISO 13807 Method using liquid-dried bacteria
Flexural strength of test specimens
prEN ISO 13805
Method using freshly prepared bacteria
ISO 11348-2:2007
prEN 12390-5
prEN 12504:—
ISO 11348:— Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test)
Compressive strength of test specimens
prEN 12350-3
Cored specimens. Taking, examining and testing in compression Copies of the above documents are available from the Programme Manager (below). Comments should be submitted by 30 September, 2008. Contact: Mussa Awaleh Email:
[email protected] B/517/1
CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.
Vebe test
prEN 583-6
prEN 12350-4
EN 228:2008
Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
Degree of compactability
Automotive fuels. Unleaded petrol. Requirements and test methods
This document proposed the adoption of ENV 583-6:2000 as a full European Standard. Contact: Anne Hannan Email:
[email protected] WEE/46
48
PTI/2
prEN 12350-5 Flow table test
EN 289:2004+A1:2008 prEN 12350-6
Plastics and rubber machines. Presses. Safety requirements
Density
MCE/3/2
Prices may be subject to change.
Update Standards Aug 2008
EN 349:1993+A1:2008
EN 840:—
EN 1094:—
Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
Mobile waste containers
Insulating refractory products
EN 840-6:2004+A1:2008
EN 1094-1:2008
MCE/3
EN 415:— Safety of packaging machines
EN 415-7:2006+A1:2008 Group and secondary packaging machines MCE/3/3
EN 473:2008 Non-destructive testing. Qualification and certification of NDT personnel. General principles
Safety and health requirements B/508/1
Terminology, classification and methods of test for high temperature insulation wool products RPI/1
EN 999:1998+A1:2008
EN 1303:—
Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
Building hardware. Cylinders for locks. Requirements and test methods
MCE/3
to EN 1303:2005
CORRIGENDUM 1:June 2008 B/538/4
EN 1028:— Fire-fighting pumps. Fire-fighting centrifugal pumps with primer
EN 1317:—
Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
EN 1028-1:2002+A1:2008
EN 1317-5:2007+A1:2008
Classification. General and safety requirements
B/542/5
FSH/17/4
Product requirements and evaluation of conformity for vehicle restraint systems
WEE/46
Road restraint systems
EN 506:2008
B/509/1
EN 508:— Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet
EN 1088:1995+A2:2008 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
EN 1591:— Flanges and their joints. Design rules for gasketed circular flange connections
MCE/3
EN 508-1:2008
EN 1591-2:2008
Steel B/542/5
Gasket parameters
EN 1090:—
PSE/15
Execution of steel structures and aluminium structures
EN 508-2:2008
EN 1645:—
Aluminium B/542/5
Leisure accommodation vehicles. Caravans
EN 1090-3:2008 Technical requirements for aluminium structures
EN 508-3:2008
B/525/9
Stainless steel
EN 1645-1:2004+A1:2008 Habitation requirements relating to health and safety B/511
B/542/5
EN 1093:— EN 574:1996+A1:2008
Safety of machinery. Evaluation of the emission of airborne hazardous substances
MCE/3
EN 1645-2:2008 User payload
Safety of machinery. Two-hand control devices. Functional aspects. Principles for design
B/511
EN 1093-2:2006+A1:2008 Tracer gas method for the measurement of the emission rate of a given pollutant
EN 1646:—
MCE/3
Leisure accommodation vehicles. Motor caravans
EN 1093-3:2006+A1:2008
EN 1646-1:2004+A1:2008
Test bench method for the measurement of the emission rate of a given pollutant
Habitation requirements relating to health and safety
MCE/3
B/511
EN 1093-4:1996+A1:2008
EN 1646-2:2008
Methodology leading to verification procedures
Capture efficiency of an exhaust system. Tracer method
B/511
MCE/3
MCE/3
EN 626:— Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery
EN 626-1:1994+A1:2008 Principles and specifications for machinery manufacturers MCE/3
EN 626-2:1996+A1:2008
User payload
EN 1647:2004+A1:2008 EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels
EN 1093-11:2001+A1:2008 Decontamination index
Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
GSE/27
MCE/3
B/511
Update Standards Aug 2008
Prices may be subject to change.
49
CEN European Standards continued... EN 1670:—
EN 13071-2:2008
EN 14805:2008
Building hardware. Corrosion resistance. Requirements and test methods
Additional requirements for underground or partly underground systems
CORRIGENDUM 1:March 2008
B/508/1
Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology
to EN 1670:2007 B/538/4
EN 1995:— Eurocode 5. Design of timber structures
EN 1995-1-1:2004+A1:2008 General. Common rules and rules for buildings B/525/5
EN 3241:2008 Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA 92 HT (A 286), silver coated. Classification: 1100 MPa (at ambient temperature)/425°C
CII/59
EN 13077:2008 Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B B/504/4
EN 13094:2008 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
EN 14891:— Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation CORRIGENDUM 1:June 2008
to EN 14891:2007 B/539
AUE/18
EN 13121:— GRP tanks and vessels for use above ground
ACE/12
EN 15092:2008 Building valves. Inline hot water supply tempering valves. Tests and requirements B/504
EN 13121-3:2008 EN 3327:2008
Design and workmanship
Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (INCO 718), uncoated. Classification: 1275 MPa/650°C
PRI/5
EN 13592:—
CORRIGENDUM 1:June 2008
ACE/12
Plastics sacks for household waste collection. Types, requirements and test methods
to EN 15285:2008
EN 3545:— Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C
Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
to EN 13592:2003 PKW/0
Railway applications. Track. Track geometry quality
Specification of performance and contact arrangements ACE/6
B/545
AMENDMENT 1:CORRIGENDUM 1:June 2008
EN 13848:— EN 3545-002:2008
EN 15285:—
EN 13848-1:2003+A1:2008 Characterisation of track geometry
EN 15316:— Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies
EN 15316-4-2:2008 Space heating generation systems, heat pump systems RHE/24
RAE/2
EN 3545-009:2008 Protective cover for plug and receptacle. Product standard ACE/6
EN 3733:— Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous
EN 15377:— EN 14466:2005+A1:2008 Fire-fighting pumps. Portable pumps. Safety and performance requirements, tests
Heating systems in buildings. Design of embedded water based surface heating and cooling systems
FSH/17/4
EN 15377-1:2008 EN 14617:— Agglomerated stone. Test methods
Determination of the design heating and cooling capacity RHE/24
EN 3733-101:2008 Protective cover receptacle. Product standard ACE/6
EN 14617-2:2008 Determination of flexural strength (bending)
EN 15377-2:2008
B/545
Design, dimensioning and installation RHE/24
EN 12649:2008 Concrete compactors and smoothing machines. Safety
EN 14710:— Fire-fighting pumps. Fire-fighting centrifugal pumps without primer
EN 15451:2008
B/513
EN 14710-1:2005+A1:2008
Fertilizers. Determination of chelating agents. Determination of iron chelated by EDDHSA by ion pair chromatography
EN 13071:—
Classification, general and safety requirements
CII/37
Stationary waste containers up to 5000 l, top lifted and bottom emptied
FSH/17/4
EN 15452:2008 EN 14761:2006+A1:2008 General requirements
Wood flooring. Solid wood parquet. Vertical finger, wide finger and module brick
Fertilizers. Determination of chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC
B/508/1
B/543
CII/37
EN 13071-1:2008
50
Prices may be subject to change.
Update Standards Aug 2008
EN 15527:2008 Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) B/508/3
EN 45510:— Guide for procurement of power station equipment
EN 45510-2-9:2008 Electrical equipment. Cabling systems E/-/20
CEN WORKSHOP AGREEMENTS CWA 15846:2008 Measuring method for dynamic compactness and bearing capacity with SP-LFWD (small-plate light falling weight deflectometer)
CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.
EN 60216:— Electrical insulating materials. Thermal endurance properties
EN 60216-5:2008 (IEC 60216-5:2008) Determination of relative thermal endurance index (RTE) of an insulating material GEL/112
EN 60317:— Specifications for particular types of winding wires
EN 60317-0-1:2008 (IEC 60317-0-1:2008) EN 50264:— Railway applications. Railway rolling stock power and control cables having special fire performance
General requirements. Enamelled round copper wire GEL/55
EN 60335:— EN 50264-1:2008
Household and similar electric appliances. Safety
no current standard is superseded £57.00 members, £114.00 non-members
General requirements
CWA 15847:2008
EN 50264-2:—
EN 60335-2-3:— (IEC 60335-2-3:2002/A2:2008)
Innovation, coordination and collaboration in service driven manufacturing supply chains. Reference model for industrial services
Cables with crosslinked elastomeric insulation
Particular requirements for electric irons
no current standard is superseded £80.00 members, £160.00 non-members
EN 50264-2-1:2008
GEL/20/12
AMENDMENT 2:June 2008
Single core cables
to EN 60335-2-3:2002 CPL/61/07
GEL/20/12
CWA 15849:2008 Coding of information and traceability of human tissues and cells
EN 50264-2-2:2008
no current standard is superseded £80.00 members, £160.00 non-members
GEL/20/12
Multicore cables
CEN REPORTS
Cables with crosslinked elastomeric insulation with reduced dimensions
CEN/TR 10345:2008
EN 50264-3-1:2008
ISE/18
Single core cables GEL/20/12
EN 50264-3-2:2008
CEN/TR 15753:2008 Packaging. Package leaflets for medicinal products. Braille and other formats for visually impaired people
CPL/61/07
EN 60335-2-10:— (IEC 60335-2-10:2002/A1:2008) Particular requirements for floor treatment machines and wet scrubbing machines
to EN 60335-2-10:2003 CPL/61/01
GEL/20/12
Solid recovered fuels. Determination of combustion behaviour PTI/17
AMENDMENT 2:May 2008
AMENDMENT 1:June 2008
Multicore cables
CEN/TR 15716:2008
Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
to EN 60335-2-6:2003 EN 50264-3:—
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
EN 60335-2-6:— (IEC 60335-2-6:2002/A2:2008)
EN 50475:2008
EN 60335-2-12:— (IEC 60335-2-12:2002/A1:2008)
Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting service transmitters in the HF bands (3 MHz – 30 MHz)
Particular requirements for warming plates and similar appliances
GEL/106
CPL/61/07
EN 50476:2008
EN 60335-2-16:— (IEC 60335-2-16:2002/A1:2008)
AMENDMENT 1:June 2008
to EN 60335-2-12:2003
PKW/0/-/5
Road transport and traffic telematics. Electronic fee collection (EFC). Ensuring the correct function of EFC equipment installed behind metallised windshield
Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic restrictions related to public exposure to radio frequency electromagnetic fields (3 MHz – 30 MHz)
EPL/278
GEL/106
CEN/TR 15762:2008
Update Standards Aug 2008
Prices may be subject to change.
Particular requirements for food waste disposers AMENDMENT 1:June 2008
to EN 60335-2-16:2003 CPL/61/01
51
CENELEC Publications continued... EN 60335-2-23:— (IEC 60335-2-23:2003/A1:2008)
EN 60794-2-50:2008 (IEC 60794-2-50:2008)
Particular requirements for appliances for skin or hair care
Family specification for simplex and duplex cables for use in terminated cable assemblies
AMENDMENT 1:May 2008
GEL/86/1
to EN 60335-2-23:2003 CPL/61/01
EN 61784-3:— Functional safety fieldbuses
EN 61784-3-1:2008 (IEC 61784-3-1:2007) Additional specifications for CPF 1
EN 60904:—
AMT/7
Photovoltaic devices
EN 60335-2-26:— (IEC 60335-2-26:2002/A1:2008) Particular requirements for clocks AMENDMENT 1:June 2008
to EN 60335-2-26:2003 CPL/61/01
EN 60904-3:2008 (IEC 60904-3:2008) Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data GEL/82
EN 60335-2-28:— (IEC 60335-2-28:2002/A1:2008) Particular requirements for sewing machines AMENDMENT 1:June 2008
EN 61784-3-2:2008 (IEC 61784-3-2:2007) Additional specifications for CPF 2 AMT/7
EN 61784-3-3:2008 (IEC 61784-3-3:2007) Additional specifications for CPF 3
EN 61318:2008 (IEC 61318:2007)
to EN 60335-2-28:2002
Live working. Conformity assessment applicable to tools, devices and equipment
CPL/61/01
PEL/78
AMT/7
EN 61784-3-6:2008 (IEC 61784-3-6:2007) Additional specifications for CPF 6 AMT/7
EN 60335-2-44:— (IEC 60335-2-44:2002/A1:2008) Particular requirements for ironers
EN 61326:— Electrical equipment for measurement, control and laboratory use. EMC requirements
AMENDMENT 1:June 2008
to EN 60335-2-44:2002 CPL/61/07
EN 60335-2-45:— (IEC 60335-2-45:2002/A1:2008) Particular requirements for portable heating tools and similar appliances AMENDMENT 1:June 2008
to EN 60335-2-45:2002
EN 61326-3:— Immunity requirements for safety-related systems and for equipment intended to perform safety related functions (functional safety)
EN 61326-3-1:2008 (IEC 61326-3-1:2008) General industrial applications
EN 61784-5:— Installation of fieldbuses
EN 61784-5-2:2008 (IEC 61784-5-2:2007) Installation profiles for CPF 2 AMT/7
EN 61784-5-3:2008 (IEC 61784-5-3:2007) Installation profiles for CPF 3 AMT/7
GEL/65/1
CPL/61/07
EN 60335-2-51:— (IEC 60335-2-51:2002/A1:2008) Particular requirements for stationary circulation pumps for heating and service water installations
EN 61326-3-2:2008 (IEC 61326-3-2:2008) Industrial applications with specified electromagnetic environment GEL/65/1
AMENDMENT 1:June 2008
EN 61784-5-6:2008 (IEC 61784-5-6:2007) Installation profiles for CPF 6 AMT/7
EN 61784-5-10:2008 (IEC 61784-5-10:2007)
to EN 60335-2-51:2003
EN 61754:—
Installation profiles for CPF 10
CPL/61/01
Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
AMT/7
EN 60335-2-105:— (IEC 60335-2-105:2004/A1:2008) Particular requirements for multifunctional shower cabinets AMENDMENT 1:May 2008
EN 61754-7:2008 (IEC 61754-7:2008) Type MPO connector family
Installation profiles for CPF 11 AMT/7
GEL/86/2
to EN 60335-2-105:2005 CPL/61/07
EN 61784-5-11:2008 (IEC 61784-5-11:2007)
EN 61784:— Industrial communication networks. Profiles
EN 60794:— Optical fibre cables
EN 61784-1:2008 (IEC 61784-1:2007)
EN 60794-2:—
Fieldbus profiles
Indoor optical fibre cables
AMT/7
EN 61918:2008 (IEC 61918:2007) Industrial communication networks. Installation of communication networks in industrial premises AMT/7
EN 62246:— Reed contact units
EN 60794-2-42:2008 (IEC 60794-2-42:2008)
EN 61784-2:2008 (IEC 61784-2:2007)
Product specification for simplex and duplex cables with A4 fibres
Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
GEL/86/1
AMT/7
52
EN 62246-2:2008 (IEC 62246-2:2007) Heavy-duty reed switches EPL/94
Prices may be subject to change.
Update Standards Aug 2008
CENELEC Publications continued... EN 62256:2008 (IEC 62256:2008) Hydraulic turbines, storage pumps and pumpturbines. Rehabilitation and performance improvement MCE/15
EN 62317:— Ferrite cores. Dimensions
IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)
EN 62317-13:2008 (IEC 62317-13:2008)
IEC 60050:—
PQ-cores for use in power supply applications
International Electrotechnical Vocabulary
IEC 60512:— Connectors for electronic equipment. Tests and measurements
IEC 60512-16:— Mechanical tests on contacts and terminations
IEC 60512-16-1:2008 Probe damage £21.12 members, £22.00 non-members EPL/48
IEC 60512-16-2:2008
EPL/51
EN 62320:—
IEC 60050-461:2008
Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS)
(Edition 2) Electric cables £168.00 members, £175.00 non-members
Restricted entry £17.28 members, £18.00 non-members EPL/48
IEC 60512-16-4:2008 Tensile strength (crimped connections) £21.12 members, £22.00 non-members
GEL/1
EN 62320-2:2008 (IEC 62320-2:2008)
EPL/48
AIS AtoN Stations. Operational and performance requirements, methods of testing, and required test results
IEC 60050-851:2008
EPL/80
Electric welding £137.28 members, £143.00 non-members
(Edition 2)
IEC 60534:— Industrial-process control valves
WEE/6
IEC 60534-9:—
CENELEC REPORTS
Test procedure for response measurements from step inputs
IEC 60191:— CLC/TR 50462:2008 Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors PEL/14
Mechanical standardization of semiconductor devices
IEC 60191-2:—
to IEC 60191-2:1966 £28.80 members, £30.00 non-members
Particular requirements for Active Optoelectronic Protective Devices responsive to Diffuse Reflection (AOPDDR) MCE/3
HARMONIZATION DOCUMENTS
IEC 60335:— Household and similar electrical appliances. Safety
Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
to CENELEC HD 60364-7-704:2005 JPEL/64
54
CH/62/3
Automatic electrical controls for household and similar use
IEC 60730-2-9:2008
to IEC 60335-2-42:2002
(Edition 3)
£14.40 members, £15.00 non-members
Particular requirements for temperature sensing controls £156.48 members, £163.00 non-members
CPL/61/5
CPL/72
IEC 60384:— IEC 60794:— Optical fibre cables
CENELEC HD 60364-7-704:—
CORRIGENDUM 1:April 2008
Particular requirements for basic safety and essential performance of radiotherapy simulators £78.72 members, £82.00 non-members
AMENDMENT 1:June 2008
Fixed capacitors for use in electronic equipment Requirements for special installations or locations. Construction and demolition site installations
IEC 60601-2-29:2008
IEC 60730:— IEC 60335-2-42:—
CENELEC HD 60364:— Low-voltage electrical installations
Medical electrical equipment
(Edition 3)
CLC/TS 61496:—
CLC/TS 61496-3:2008 (IEC 61496-3:2008)
IEC 60601:—
AMENDMENT 17:May 2008
EPL/47
Safety of machinery. Electro-sensitive protective equipment
to IEC 60534-9:2007 GEL/65/2
Dimensions
CENELEC TECHNICAL SPECIFICATIONS
CORRIGENDUM 1:June 2008
IEC 60384-1:2008 (Edition 4)
IEC 60794-2-41:2008
Generic specification £168.00 members, £175.00 non-members
Indoor cables. Product specification for simplex and duplex buffered A4 fibres £72.00 members, £75.00 non-members
EPL/40X
GEL/86/1
Prices may be subject to change.
Update Standards Aug 2008
IEC 60825:—
IEC 61753-085-2:2008
IEC 62220:—
Safety of laser products
Medical electrical equipment. Characteristics of digital X-ray imaging devices
IEC 60825-4:—
Non-connectorized single-mode pigtailed CWDM devices for category C. Controlled environment £45.12 members, £47.00 non-members
Laser guards
GEL/86/2
IEC 62220-1-3:2008
to IEC 60825-4:2006
IEC 61968:—
£41.28 members, £43.00 non-members
Application integration at electric utilities. System interfaces for distribution management
Determination of the detective quantum efficiency. Detectors used in Dynamic Imaging £96.00 members, £100.00 non-members
AMENDMENT 1:June 2008
EPL/76
CH/62/2
IEC 61968-13:2008 IEC 61000:— Electromagnetic compatibility (EMC)
CIM RDF Model exchange format for distribution £137.28 members, £143.00 non-members
IEC 62310:— Static transfer systems (STS)
PEL/57
IEC 62310-3:2008
IEC 61000-3-3:2008 (Edition 2)
IEC 61970:—
Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection £78.72 members, £82.00 non-members
Energy management system application program interface (EMS-API)
GEL/210/12
PEL/22
IEC 61970-402:2008 Common services £105.60 members, £110.00 non-members PEL/57
IEC 61000-4-7:—
IEC 61970-403:2008
Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
Generic data access £105.60 members, £110.00 non-members
AMENDMENT 1:June 2008
IEC 61970-453:2008
to IEC 61000-4-7:2002
CIM based graphics exchange £50.88 members, £53.00 non-members
£78.72 members, £82.00 non-members GEL/210/12
Safety of machinery. Electro-sensitive protective equipment
IEC 62335:2008 Circuit breakers. Switched protective earth portable residual current devices for class I and battery powered vehicle applications £180.48 members, £188.00 non-members PEL/23/1
PEL/57
IEC/TS 62395:— Electrical resistance trace heating systems for industrial and commercial applications
PEL/57
IEC/TS 62395-2:2008 IEC 62002:—
IEC 61496:—
Method for specifying performance and test requirements £137.28 members, £143.00 non-members
Mobile and portable DVB-T/H radio access
IEC 62002-1:2008
Application guide for system design, installation and maintenance £168.00 members, £175.00 non-members PEL/27
(Edition 2) General requirements and tests
Interface specification £156.48 members, £163.00 non-members
CORRIGENDUM 1:June 2008
EPL/100
IEC 61496-1:—
to IEC 61496-1:2004 MCE/3
IEC/TR 62510:2008 Standardising the characteristics of electricity £35.52 members, £37.00 non-members GEL/8
IEC 62002-2:2008 (Edition 2)
IEC 61512:— Batch control
Interface conformance testing £120.00 members, £125.00 non-members
IEC CISPR 16:— Specification for radio disturbance and immunity measuring apparatus and methods
EPL/100
IEC CISPR 16-1-4:—
IEC 61512-3:2008
IEC 62040:—
General and site recipe models and representation £156.48 members, £163.00 non-members
Uninterruptible power systems (UPS)
Radio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
IEC 62040-1:2008
AMENDMENT 2:June 2008
General and safety requirements for UPS £156.48 members, £163.00 non-members
to IEC CISPR 16-1-4:2007
PEL/22
GEL/210/12
GEL/65/1
IEC 61753:—
£14.40 members, £15.00 non-members
Fibre optic interconnecting devices and passive components performance standard
IEC 62135:— Resistance welding equipment e-mail
IEC 61753-031-6:2008 Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category O. Uncontrolled environment £65.28 members, £68.00 non-members GEL/86/2
Update Standards Aug 2008
IEC 62135-1:2008 Safety requirements for design, manufacture and installation £156.48 members, £163.00 non-members
your order
[email protected]
WEE/29
Prices may be subject to change.
55
ISO Publications
ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)
ISO 3581:—
ISO 5801:—
Welding consumables. Covered electrodes for manual metal arc welding of stainless and heatresisting steels. Classification
Industrial fans. Performance testing using standardized airways
CORRIGENDUM 1:June 2008
to ISO 5801:2007
CORRIGENDUM 1:July 2008
to ISO 3581:2003
MCE/17
WEE/39
Will be implemented as an identical British Standard
Will not be implemented as a British Standard
ISO 6336:— ISO 3601:—
Calculation of load capacity of spur and helical gears
Fluid power systems. O-rings
ISO 6336-1:—
ISO 734:— ISO 3601-1:2008
Basic principles, introduction and general influence factors
(Edition 4)
CORRIGENDUM 1:June 2008
Inside diameters, cross-sections, tolerances and designation codes £91.20 members, £95.00 non-members
to ISO 6336-1:2006
Oilseed meals. Determination of oil content
ISO 734-2:2008 (Edition 2) Rapid extraction method £38.40 members, £40.00 non-members AW/307
MCE/5
Will be implemented as an identical British Standard
MCE/11
Will be implemented as an identical British Standard
ISO 6336-2:— Calculation of surface durability (pitting)
Will be implemented as an identical British Standard
CORRIGENDUM 1:June 2008
ISO 1893:2007 (Edition 3)
ISO 3601-2:2008
to ISO 6336-2:2006
Housing dimensions for general applications £94.08 members, £98.00 non-members
MCE/5
Will be implemented as an identical British Standard
Refractory products. Determination of refractoriness under load. Differential method with rising temperature £62.40 members, £65.00 non-members
MCE/11
RPI/1
ISO 3823:—
Will be implemented as an identical British Standard
to ISO 6336-3:2006
Dentistry. Rotary bur instruments
MCE/5
Will be implemented as an identical British Standard
ISO 6336-3:— Calculation of tooth bending strength CORRIGENDUM 1:June 2008
Will be implemented as an identical British Standard
ISO 2709:2008
ISO 3823-2:—
(Edition 4)
Finishing burs
Information and documentation. Format for Information Exchange £38.40 members, £40.00 non-members
AMENDMENT 1:June 2008
Tobacco and tobacco products. Determination of water content. Karl Fischer method
to ISO 3823-2:2003
CORRIGENDUM 1:June 2008
£11.52 members, £12.00 non-members
IDT/2/7
to ISO 6488:2004
CH/106/4
Will be implemented as an identical British Standard
AW/40
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 2867:— Earth-moving machinery. Access systems
ISO 6626:— ISO 5006:—
CORRIGENDUM 1:June 2008
Earth-moving machinery. Operator’s field of view. Test method and performance criteria
to ISO 2867:2006
CORRIGENDUM 1:June 2008
B/513/1
to ISO 5006:2006
Will be implemented as an identical British Standard
ISO 3382-2:2008 Reverberation time in ordinary rooms £62.40 members, £65.00 non-members EH/1/6
Internal combustion engines. Piston rings
ISO 6626-3:2008
B/513/1
Coil-spring-loaded oil control rings made of steel £65.28 members, £68.00 non-members
Will be implemented as an identical British Standard
MCE/14/-/10
Will be implemented as an identical British Standard
ISO 3382:— Acoustics. Measurement of room acoustic parameters
ISO 6488:—
ISO 5293:— Conveyor belts. Determination of minimum transition distance on three idler rollers CORRIGENDUM 1:June 2008
to ISO 5293:2004 PRI/67
Will be implemented as an identical British Standard
ISO 6709:2008 (Edition 2) Standard representation of geographic point location by coordinates £78.72 members, £82.00 non-members IST/36
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 5364:2008
ISO 6752:2008
(Edition 4)
(Edition 2)
Oil of amyris (Amyris balsamifera L.) £38.40 members, £40.00 non-members
Anaesthetic and respiratory equipment. Oropharyngeal airways £49.92 members, £52.00 non-members
Tools for pressing. Round punches with 60° conical head and straight shank £33.60 members, £35.00 non-members
AW/54
CH/121/5
MTE/12
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 3525:2008 (Edition 2)
56
Prices may be subject to change.
Update Standards Aug 2008
ISO Publications continued... ISO 8534:2008
ISO 9276:—
ISO/IEC 11694:—
(Edition 2)
Representation of results of particle size analysis
Identification cards. Optical memory cards. Linear recording method
ISO 9276-3:2008
ISO/IEC 11694-3:2008
Adjustment of an experimental curve to a reference model £70.08 members, £73.00 non-members
(Edition 3)
Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free) £45.12 members, £47.00 non-members AW/307
Will be implemented as an identical British Standard
LBI/37
ISO/IEC 8824:—
Will be implemented as an identical British Standard
Information technology. Abstract Syntax Notation One (ASN.1)
ISO 10190:2008 ISO/IEC 8824-1:—
(Edition 2)
Specification of Basic Notation
Motorcycle chains. Characteristics and test methods £57.60 members, £60.00 non-members
AMENDMENT 4:July 2008
to ISO/IEC 8824-1:2002
Optical properties and characteristics £28.80 members, £30.00 non-members IST/17
Will be implemented as an identical British Standard
ISO/IEC 11694-4:2008 (Edition 3) Logical data structures £70.08 members, £73.00 non-members
MCE/1
IST/17
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 10426:—
ISO/IEC 11770:—
Terminal units for medical gas pipeline systems
Petroleum and natural gas industries. Cements and materials for well cementing
Information technology. Security techniques. Key management
ISO 9170-1:2008
ISO 10426-6:2008
ISO/IEC 11770-2:2008
(Edition 2)
Methods for determining the static gel. Strength of cement formulations £45.12 members, £47.00 non-members
(Edition 2)
£11.52 members, £12.00 non-members IST/6
Will not be implemented as a British Standard
ISO 9170:—
Terminal units for use with compressed medical gases and vacuum £65.28 members, £68.00 non-members CH/121/6
PSE/17/-/3
Will be implemented as an identical British Standard
Mechanisms using symmetric techniques £78.72 members, £82.00 non-members IST/33
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 9170-2:2008 (Edition 2) Terminal units for anaesthetic gas scavenging systems £70.08 members, £73.00 non-members CH/121/6
ISO/IEC 10779:2008 Information technology. Office equipment accessibility guidelines for elderly persons and persons with disabilities £70.08 members, £73.00 non-members
ISO/IEC 11770-3:2008 (Edition 2) Mechanisms using asymmetric techniques £129.60 members, £135.00 non-members
IST/3
IST/33
Will not be implemented as a British Standard
Will be implemented as an identical British Standard
ISO 11064:—
ISO 12135:—
Ergonomic design of control centres
Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
Will be implemented as an identical British Standard
ISO 9186:— Graphical symbols. Test methods
ISO 11064-5:2008 ISO 9186-2:2008 Method for testing perceptual quality £54.72 members, £57.00 non-members PH/8/2
Displays and controls £100.80 members, £105.00 non-members
CORRIGENDUM 1:June 2008
to ISO 12135:2002 ISE/NFE/4
PH/9
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 11143:2008 ISO 9211:— Optics and photonics. Optical coatings
(Edition 2) Dentistry. Amalgam separators £73.92 members, £77.00 non-members
ISO 9211-3:2008
CH/106/4
(Edition 2)
Will be implemented as an identical British Standard
Environmental durability £38.40 members, £40.00 non-members CPW/172/3
Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems
ISO 12176-2:2008 (Edition 2) Electrofusion £65.28 members, £68.00 non-members
ISO 11357:— Plastics. Differential scanning calorimetry (DSC)
Will be implemented as an identical British Standard
ISO 11357-6:2008 ISO 9244:2008
ISO 12176:—
(Edition 2)
PRI/88/2
Will be implemented as an identical British Standard
ISO 12189:2008
Earth-moving machinery. Machine safety labels. General principles £120.00 members, £125.00 non-members
Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) £49.92 members, £52.00 non-members
Implants for surgery. Mechanical testing of implantable spinal devices. Fatigue test method for spinal implant assemblies using an anterior support £49.92 members, £52.00 non-members
B/513/1
PRI/21
CH/150/5
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
Will not be implemented as a British Standard
(Edition 2)
58
Prices may be subject to change.
Update Standards Aug 2008
ISO Publications continued... ISO 12241:2008
ISO/IEC 14496-4:—
ISO 15270:2008
(Edition 2)
Conformance testing
(Edition 2)
Thermal insulation for building equipment and industrial installations. Calculation rules £94.08 members, £98.00 non-members
AMENDMENT 29:July 2008 £54.72 members, £57.00 non-members
Plastics. Guidelines for the recovery and recycling of plastics waste £54.72 members, £57.00 non-members
B/540
IST/37
PRI/89
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 12576:—
ISO/IEC 14496-4:—
Thermal insulation products. Conformity control systems
to ISO/IEC 14496-4:2004
Conformance testing AMENDMENT 8:CORRIGENDUM 1:June 2008
ISO/IEC 15444:— Information technology. JPEG 2000 image coding system
to ISO/IEC 14496-4:2004 ISO 12576-2:2008
IST/37
In-situ products £54.72 members, £57.00 non-members
ISO/IEC 15444-9:—
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
Interactivity tools, APIs and protocols
B/540/8
to ISO/IEC 15444-9:2005
Will be implemented as an identical British Standard
IST/37
ISO/IEC 14496-4:— ISO 12776:2008 (Edition 2) Pallets. Slip sheets £54.72 members, £57.00 non-members PKW/0/-/11
CORRIGENDUM 2:June 2008
Conformance testing
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
AMENDMENT 19:CORRIGENDUM 1:July 2008
to ISO/IEC 14496-4:2004 IST/37
ISO 15686:—
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
Buildings and constructed assets. Service-life planning
Will be implemented as an identical British Standard
ISO 13408:—
ISO/IEC 14496-5:—
Aseptic processing of health care products
Reference software AMENDMENT 10:CORRIGENDUM 2:June 2008
to ISO/IEC 14496-5:2001 ISO 13408-1:2008 (Edition 2) General requirements £94.08 members, £98.00 non-members
ISO 13823:2008 General principles on the design of structures for durability £91.20 members, £95.00 non-members B/525/1
Reference service life and service-life estimation £91.20 members, £95.00 non-members B/500
Will be implemented as an identical British Standard
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 15743:2008
ISO/IEC 14496-16:—
Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management £83.52 members, £87.00 non-members
CH/198
Will not be implemented as a British Standard
ISO 15686-8:2008
Animation Framework eXtension (AFX)
PH/9/1
AMENDMENT 1:CORRIGENDUM 1:July 2008
Will be implemented as an identical British Standard
to ISO/IEC 14496-16:2006 IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
Will be implemented as an identical British Standard
ISO 15970:2008 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor £100.80 members, £105.00 non-members
ISO 15002:2008
PTI/15
ISO 13906:2008
(Edition 2)
Will be implemented as an identical British Standard
Animal feeding stuffs. Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents £62.40 members, £65.00 non-members
Flow-metering devices for connection to terminal units of medical gas pipeline systems £70.08 members, £73.00 non-members
ISO 16293:—
AW/10
Will be implemented as an identical British Standard
CH/121/6
Glass in building. Basic soda lime silicate glass products
Will be implemented as an identical British Standard
ISO/IEC 14496:—
ISO 15223:—
Information technology. Coding of audio-visual objects
Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied
ISO 16293-1:2008 Definitions and general physical and mechanical properties £28.80 members, £30.00 non-members B/520/1
Will be implemented as an identical British Standard
ISO/IEC 14496-3:— Audio
ISO 15223-1:—
AMENDMENT 9:July 2008
General requirements
to ISO/IEC 14496-3:2005
AMENDMENT 1:June 2008
£100.80 members, £105.00 non-members
to ISO 15223-1:2007
IST/37
£11.52 members, £12.00 non-members
Earth-moving machinery. Determination of ground contact pressure for crawler machines £33.60 members, £35.00 non-members
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
CH/210/3
B/513/1
Will not be implemented as a British Standard
Will be implemented as an identical British Standard
60
Prices may be subject to change.
ISO 16754:2008
Update Standards Aug 2008
ISO 16889:2008
ISO 19338:—
ISO 21003-2:2008
(Edition 2)
Performance and assessment requirements for design standards on structural concrete
Pipes £62.40 members, £65.00 non-members
CORRIGENDUM 1:June 2008
PRI/88/2
to ISO 19338:2007
Will be implemented as an identical British Standard
Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element £94.08 members, £98.00 non-members MCE/18/-/6
B/525/2
Will not be implemented as a British Standard
Will be implemented as an identical British Standard
ISO/IEC 19762:— ISO 17402:2008 Soil quality. Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials £86.40 members, £90.00 non-members EH/4
Will not be implemented as a British Standard
Information technology. Radio frequency identification for item management
PRI/88/2
ISO/IEC 19762-1:2008
ISO 21003-5:2008
(Edition 2) General terms relating to (AIDC) £86.40 members, £90.00 non-members
(Edition 2) Reference architecture and definition of parameters to be standardized £100.80 members, £105.00 non-members
Will be implemented as an identical British Standard
Fitness for purpose of the system £45.12 members, £47.00 non-members PRI/88/2
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO/TS 21003-7:2008 ISO/IEC 19762-2:2008 (Edition 2)
ISO/IEC 18000-1:2008
Fittings £45.12 members, £47.00 non-members
Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary
IST/34
ISO/IEC 18000:—
ISO 21003-3:2008
Optically readable media (ORM) £70.08 members, £73.00 non-members
Guidance for the assessment of conformity £57.60 members, £60.00 non-members PRI/88
Will be implemented as an identical British Standard
IST/34
Will be implemented as an identical British Standard
ISO 21527:—
IST/34
ISO/IEC 19762-3:2008
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of yeasts and moulds
Will be implemented as an identical British Standard
(Edition 2) Radio frequency identification (RFID) £62.40 members, £65.00 non-members
ISO/IEC TR 18037:2008
IST/34
(Edition 2)
Will be implemented as an identical British Standard
Programming languages. C. Extensions to support embedded processors £129.60 members, £135.00 non-members
ISO/IEC 19762-4:2008
IST/5
Will be implemented as an identical British Standard
Information technology. Radio frequency identification device conformance test methods
ISO 21527-2:2008
IST/34
AW/9
Locating systems £28.80 members, £30.00 non-members
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 21573:— Building construction machinery and equipment. Concrete pumps
ISO/IEC 19790:—
IST/34
Information technology. Security techniques. Security requirements for cryptographic modules
Will not be implemented as a British Standard
CORRIGENDUM 1:June 2008
to ISO/IEC TR 18047-3:2004
Colony count technique in products with water activity less than or equal to 0,95 £45.12 members, £47.00 non-members
ISO/IEC 19762-5:2008
Test methods for air interface communications at 13,56 MHz CORRIGENDUM 2:June 2008
Will be implemented as an identical British Standard
General terms relating to radio communications £78.72 members, £82.00 non-members
IST/34
ISO/IEC TR 18047-3:—
Colony count technique in products with water activity greater than 0,95 £38.40 members, £40.00 non-members AW/9
Will be implemented as an identical British Standard
ISO/IEC TR 18047:—
ISO 21527-1:2008
ISO 21573-2:2008
to ISO/IEC 19790:2006
Procedure for examination of technical parameters £62.40 members, £65.00 non-members
IST/33
B/513
Will be implemented as an identical British Standard
Will not be implemented as a British Standard
ISO 21003:—
ISO 21873:—
Multilayer piping systems for hot and cold water installations inside buildings
Building construction machinery and equipment. Mobile crushers
ISO 21003-1:2008
ISO 21873-1:2008
to ISO 18431-2:2004
General £45.12 members, £47.00 non-members
Terminology and commercial specifications £36.00 members, £60.00 non-members
GME/21/2
PRI/88/2
B/513
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
Will not be implemented as a British Standard
Update Standards Aug 2008
Prices may be subject to change.
ISO 18431:— Mechanical vibration and shock. Signal processing
ISO 18431-2:— Time domain windows for Fourier Transform analysis CORRIGENDUM 1:June 2008
61
ISO Publications continued... ISO/TR 22694:2008
ISO 24034:—
ISO/IEC 29361:2008
Gas cylinders. Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing £105.60 members, £110.00 non-members
Welding consumables. Solid wires and rods for fusion welding of titanium and titanium alloys. Classification
Information technology. Basic Profile Version 1.1 £105.60 members, £110.00 non-members
AMENDMENT 1:June 2008
ICT/-/1
to ISO 24034:2005
Will not be implemented as a British Standard
PVE/3/7
£11.52 members, £12.00 non-members
Will be implemented as an identical British Standard
WEE/39
Will be implemented as an identical British Standard
ISO/IEC 29362:2008
ISO 24157:2008
Information technology. Web Services Interoperability. WS-I Attachments. Profile Version 1.0 £83.52 members, £87.00 non-members
ISO 22734:— Hydrogen generators using water electrolysis process
ISO 22734-1:2008 Industrial and commercial applications £91.20 members, £95.00 non-members
Ophthalmic optics and instruments. Reporting aberrations of the human eye £83.52 members, £87.00 non-members
ISO 22915:— Industrial trucks. Verification of stability
Will not be implemented as a British Standard
CH/172/6
Will be implemented as an identical British Standard
PVE/3
Will be implemented as an identical British Standard
ICT/-/1
ISO/IEC 24759:2008 Information technology. Security techniques. Test requirements for cryptographic modules £137.28 members, £143.00 non-members
ISO/IEC 29363:2008 Information technology. Simple SOAP Binding Profile Version 1.0 £54.72 members, £57.00 non-members ICT/-/1
Will not be implemented as a British Standard
IST/33
Will be implemented as an identical British Standard
ISO 32000:— Document management. Portable document format
ISO 22915-8:2008
ISO 24999:2008
Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated £28.80 members, £30.00 non-members
Flexible cellular polymeric materials. Determination of fatigue by a constant strain procedure £33.60 members, £35.00 non-members
MHE/7
PRI/24
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 22915-10:2008
ISO 25620:2008
Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices £28.80 members, £30.00 non-members
Laminate floor coverings. Determination of long-side friction for mechanically assembled panels £28.80 members, £30.00 non-members
MHE/7
PRI/60
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 22915-20:2008
ISO/IEC 26514:2008
Additional stability test for trucks operating in the special condition of offset load, offset by utilization £28.80 members, £30.00 non-members
Systems and software engineering. Requirements for designers and developers of user documentation £146.88 members, £153.00 non-members
MHE/7
IST/15
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
ISO 32000-1:2008 PDF 1.7 £252.48 members, £263.00 non-members IDT/1/2
Will be implemented as an identical British Standard
ISO/PAS PUBLICATIONS ISO/PAS 30003:2008 Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management system £94.08 members, £98.00 non-members SME/32
Help Us to Help You!
ISO/IEC 23002:— Information technology. MPEG video technologies
ISO 27799:2008 Health informatics. Information security management in health using ISO/IEC 27002 £105.60 members, £110.00 non-members IST/35
Will be implemented as an identical British Standard
ISO/IEC 23002-1:— Accuracy requirements for implementation of integer-output 8x8 inverse discrete cosine transform
ISO 28300:2008
£11.52 members, £12.00 non-members
Petroleum, petrochemical and natural gas industries. Venting of atmospheric and lowpressure storage tanks £120.00 members, £125.00 non-members
IST/37
PSE/17/-/6
Will be implemented as an identical British Standard
Will be implemented as an identical British Standard
AMENDMENT 1:June 2008
to ISO/IEC 23002-1:2006
62
Prices may be subject to change.
Always quote your Customer Number Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
Update Standards Aug 2008