BS EN 14620:-. Design and manufacture of site built, vertical, cylindrical, flat-
bottomed steel tanks for the storage of refrigerated, liquefied gases with
operating ...
BRITISH STANDARDS BS 434:Bitumen road emulsions
BS 434-2:2006
BS 4592-2:2006
BS 5392:-
Expanded metal gratings.
Acrylonitrile-butadiene-styrene
Specification
(ABS) fittings for use with ABS
supersedes BS 4592-2:1987 ISBN 0 580 48255 3 £34.00 members, £68.00 non-members
pressure pipe
B/208/1
Code of practice for the use of cationic bitumen emulsions on roads and other paved areas
Specification
supersedes BS 5392-1:1976 ISBN 0 580 49183 8 £34.00 members, £68.00 non-members
BS 4592-3:2006
supersedes BS 434-2:1984 ISBN 0 580 49879 4 £56.00 members, £112.00 non-members
BS 5392-1:2006
Cold formed metal planks.
PRI/88/2
Specification
B/510
supersedes BS 4592-3:1987 ISBN 0 580 48256 1 £34.00 members, £68.00 non-members
BS 6068:-
B/208/1
BS 2000:-
Water quality
Methods of test for petroleum and its products
BS 6068-2.99:-
BS 4592-4:2006
Physical, chemical and
Glass reinforced plastics (GRP)
BS 2000-391:-
open bar gratings. Specification
Determination of aromatic
supersedes BS 4592-4:1992 ISBN 0 580 48257 X £34.00 members, £68.00 non-members
hydrocarbon types in middle distillates. High performance liquid
biochemical methods. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge.
B/208/1
chromatography method with refractive index detection
Method using extraction and gas chromatography/mass spectrometry
BS 4592-5:2006 BS 4592:-
Solid plates in metal and glass
Industrial type flooring and stair
reinforced plastics (GRP).
treads
Specification
BS 6068-5.45:Biological methods. Evaluation of genotoxicity by measurement of
supersedes BS 4592-5:1995 ISBN 0 580 48258 8 £34.00 members, £68.00 non-members
BS 4592-0:2006 Common design requirements and
the induction of micronuclei. Mixed population method using the cell
B/208/1
line V79
recommendations for installation
supersedes BS 4592 Parts 1-5 ISBN 0 580 48253 7 £49.00 members, £98.00 non-members
BS 6700:2006
BS 5391:-
Design, installation, testing and
Acrylonitrile-butadiene-styrene
B/208/1
maintenance of services supplying
(ABS) pressure pipe
water for domestic use within buildings and their curtilages.
BS 4592-1:2006
BS 5391-1:2006
Specification
Metal open bar gratings.
Specification
Specification
supersedes BS 5391-1:1976 ISBN 0 580 49182 X
supersedes BS 6700:1997 ISBN 0 580 49786 0 £90.00 members, £180.00 non-members
supersedes BS 4592-1:1995 ISBN 0 580 48254 5
£49.00 members, £98.00 non-members
£34.00 members, £68.00 non-members
B/504/2 PRI/88/2/P4
B/208/1
BRITISH STANDARDS
Page 1 of 71
BS 7270:2006
BS EN ISO 140-18:2006
DD CEN/TS 1071:-
Metallic materials. Constant
Laboratory measurement of sound
Advanced technical ceramics.
amplitude strain controlled axial
generated by rainfall on building
Methods of test for ceramic
fatigue. Method of test
elements
coatings
supersedes BS 7270:1990 ISBN 0 580 49023 8 £49.00 members, £98.00 non-members
no current standard is superseded ISBN 0 580 49831 X £49.00 members, £98.00 non-members ISE/NFE/4/6
EH/1/6
BS 8468:-
BS EN 284:2006
Respiratory protective devices for
Swap bodies. Non-stackable swap
use against chemical, biological,
bodies of class C. Dimensions and
radiological and nuclear (CBRN)
general requirements
agents
supersedes BS EN 284:1992 ISBN 978 058049902 9 £49.00 members, £98.00 non-members
BS 8468-2:2006
DD CEN/TS 1071-11:2005 the Stoney formula
no current standard is superseded ISBN 978 058049935 7 £17.00 members, £34.00 non-members RPI/13
BS EN ISO 1269:2006 Plastics. Homopolymer and
TW/1
Negative pressure, air purifying
Determination of internal stress by
devices with full face mask.
copolymer resins of vinyl chloride. Determination of volatile matter (including water)
Specification
BS EN 415:-
no current standard is superseded ISBN 0 580 49762 3
Safety of packaging machines
supersedes BS 2782-4:Method 454D:1978 ISBN 0 580 49816 6 £28.00 members, £56.00 non-members
£64.00 members, £128.00 non-members
PH/4
BS EN 415-6:2006
PRI/82
Pallet wrapping machines
no current standard is superseded ISBN 978 058049933 3
BS EN 1297:2004
£74.00 members, £148.00 non-members
BS EN PUBLICATIONS
Flexible sheets for waterproofing.
MCE/3/3
BS EN ISO 105:-
Bitumen, plastic and rubber sheets for roof waterproofing. Method of
Textiles. Tests for colour fastness
artificial ageing by long term
BS EN 541:2006
exposure to the combination of UV
BS EN ISO 105-C12:2006
Aluminium and aluminium alloys.
radiation, elevated temperature
Colour fastness to industrial
Rolled products for cans, closures
and water
laundering
and lids. Specifications
no current standard is superseded ISBN 0 580 49848 4 £28.00 members, £56.00 non-members
supersedes BS EN 541:1995 ISBN 978 058049934 0 £49.00 members, £98.00 non-members
no current standard is superseded ISBN 0 580 49818 2 £34.00 members, £68.00 non-members
B/546/2 NFE/35
TCI/81
BS EN 1337:BS EN ISO 140:-
BS EN 545:2006
Acoustics. Measurement of sound
Ductile iron pipes, fittings,
insulation in buildings and of
accessories and their joints for
building elements
water pipelines. Requirements and
Structural bearings
BS EN 1337-2:2004 Sliding elements
test methods
supersedes BS EN 545:2002 ISBN 0 580 49821 2 £74.00 members, £148.00 non-members PSE/10
BS EN PUBLICATIONS
supersedes BS EN 1337-2:2001 which is withdrawn, partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49849 2 £74.00 members, £148.00 non-members B/522
Page 2 of 71
BS EN 1337-3:2005
BS EN 1881:2006
BS EN 1993-1-4:2006
Elastomeric bearings
Products and systems for the
Supplementary rules for stainless
partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49850 6 £74.00 members, £148.00 non-members B/522
protection and repair of concrete
steels
structures. Test methods. Testing
no current standard is superseded ISBN 0 580 49666 X £56.00 members, £112.00 non-members
BS EN 1337-5:2005
of anchoring products by the pull-out method
no current standard is superseded ISBN 0 580 49827 1 £28.00 members, £56.00 non-members
B/525/31
B/517/8
Pot bearings
partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49851 4 £68.00 members, £136.00 non-members B/522
BS EN 1993-1-5:2006 Plated structural elements
partially supersedes BS 449-2:1969, BS 5400-3:2000 and BS 5950-1:2000 ISBN 0 580 49667 8 £68.00 members, £136.00 non-members B/525/31
BS EN 1926:2006 Natural stone test methods. Determination of uniaxial compressive strength
supersedes BS EN 1926:1999 ISBN 978 058049936 4
BS EN 1337-7:2004
BS EN 1993-1-11:2006
£34.00 members, £68.00 non-members
Spherical and cylindrical PTFE
B/545
bearings
supersedes BS EN 1337-7:2001 which is withdrawn, partially supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983 ISBN 0 580 49852 2 £49.00 members, £98.00 non-members B/522
BS EN 1936:2006 Natural stone test methods.
B/525/31
Determination of real density and apparent density, and of total and
BS EN 2335:2005
supersedes BS EN 1936:1999 ISBN 978 058049919 7 £28.00 members, £56.00 non-members
Personal eye protection. Mesh eye and face protectors
Aerospace series. Bearings, spherical plain in corrosion
B/545
supersedes BS EN 1731:1998 ISBN 0 580 49882 4 £34.00 members, £68.00 non-members
resisting steel without assembly slot. Dimensions and loads
supersedes BS EN 2335:1990 ISBN 0 580 49854 9 £28.00 members, £56.00 non-members
BS EN 1993:-
PH/2/2
components
no current standard is superseded ISBN 0 580 49668 6 £56.00 members, £112.00 non-members
open porosity
BS EN 1731:2006
Design of structures with tension
Eurocode 3. Design of steel
ACE/12
structures
BS EN ISO 1805:2006 Fishing nets. Determination of
BS EN 1993-1:-
BS EN 3155:-
breaking force and knot breaking
General rules
Aerospace series. Electrical contacts used in elements of
force of netting yarns
no current standard is superseded ISBN 0 580 49883 2 £34.00 members, £68.00 non-members
connection
BS EN 1993-1-3:2006 Supplementary rules for
TCI/77
cold-formed members and
BS EN 3155-014:2006
sheeting
Contacts, electrical, male, type A,
supersedes DD ENV 1993-1-3:2001 which is withdrawn and partially supersedes BS 5950-5:1998, BS 5950-6:1995 and BS 5950-9:1994 ISBN 0 580 49665 1
crimp, class S. Product standard
£90.00 members, £180.00 non-members
no current standard is superseded ISBN 978 058049937 1 £28.00 members, £56.00 non-members ACE/6/-/3
B/525/31
BS EN PUBLICATIONS
Page 3 of 71
BS EN 3155-015:2006
BS EN 3645-004:2006 BS EN ISO 3166-1:2006
Contacts, electrical, female, type A,
Receptacle, hermetic, square
Country codes
crimp, class S. Product standard
flange mounting. Product standard
no current standard is superseded ISBN 978 058049938 8 £28.00 members, £56.00 non-members ACE/6/-/3
supersedes BS EN ISO 3166-1:1998 ISBN 0 580 49824 7 £74.00 members, £148.00 non-members IDT/2/11
BS EN 3155-030:2006
BS EN 3339:2006
BS EN 3645-005:2006
Contacts, electrical, coaxial,
Aerospace series. Aluminium alloy
Receptacle, hermetic, round
shielded, size 12, male, type D,
AL-P7010-T76. Die forgings. a $3L
flange, brasage mounting. Product
crimp, class R. Product standard
200 mm
standard
no current standard is superseded ISBN 0 580 49948 7 £28.00 members, £56.00 non-members ACE/6/-/3
no current standard is superseded ISBN 978 058049939 5 £28.00 members, £56.00 non-members ACE/6/-/3
no current standard is superseded ISBN 978 058049943 2 £64.00 members, £128.00 non-members ACE/61/-/24
BS EN 3155-031:2006
BS EN 3476:2006
BS EN 3645-006:2006
Contacts, electrical, coaxial,
Aerospace series. Steel
Protective cover for receptacle.
shielded, size 12, female, type D,
FE-PL1501 (30CrMo12). Air
Product standard
crimp, class R. Product standard
melted. Softened. Forging stock. a
no current standard is superseded ISBN 978 058049940 1
or D $3L 300 mm
no current standard is superseded ISBN 978 058049950 0 £28.00 members, £56.00 non-members ACE/6/-/3
£28.00 members, £56.00 non-members
ACE/6/-/3
no current standard is superseded ISBN 978 058049944 9 £28.00 members, £56.00 non-members
no current standard is superseded ISBN 978 058049949 4 £17.00 members, £34.00 non-members ACE/6/-/3
ACE/61/-/15 BS EN 3645-009:2006 BS EN 3155-035:2006
Receptacle, round flange, jam nut
Contacts, electrical, triaxial, size
BS EN 3645:-
mounting. Product standard
08, female, type D, crimp, class R.
Aerospace series. Connectors,
Product standard
electrical, circular, scoop-proof,
no current standard is superseded ISBN 978 058049941 8
triple start threaded coupling,
£34.00 members, £68.00 non-members
no current standard is superseded ISBN 978 058049951 7 £28.00 members, £56.00 non-members ACE/6/-/3
200$0DC continuous
operating temperature 175$0DC or
ACE/6/-/3 BS EN 3645-010:2006 BS EN 3645-003:2006
Receptacle, hermetic, round
BS EN 3155-059:2006
Receptacle square flange
flange, jam nut mounting. Product
Contacts, electrical, coaxial, size
mounting. Product standard
standard
16, female, type D, solder, class R. Product standard
no current standard is superseded ISBN 978 058049942 5 £34.00 members, £68.00 non-members ACE/6/-/3
no current standard is superseded ISBN 978 058049947 0 £28.00 members, £56.00 non-members
ACE/6/-/3
no current standard is superseded ISBN 978 058049952 4 £28.00 members, £56.00 non-members ACE/6/-/3
BS EN ISO 3166:Codes for the representation of names of countries and their subdivisions
BS EN PUBLICATIONS
Page 4 of 71
BS EN 3645-011:2006
BS EN 12588:2006 BS EN ISO 9333:2006
Lanyard release plug with
Lead and lead alloys. Rolled lead
Dentistry. Brazing materials
grounding fingers. Type 1. Product standard
no current standard is superseded ISBN 978 058049953 1 £28.00 members, £56.00 non-members ACE/6/-/3
sheet for building purposes
supersedes BS EN 29333:1992 ISBN 0 580 49735 6 £34.00 members, £68.00 non-members CH/106/2
supersedes BS EN 12588:1999 ISBN 978 058049960 9 £34.00 members, £68.00 non-members NFE/22
BS EN 10130:2006
BS EN 12788:2005
BS EN 3645-012:2006
Cold rolled low carbon steel flat
Advanced technical ceramics.
Lanyard release plug with
products for cold forming.
Mechanical properties of ceramic
grounding fingers. Type 2. Product
Technical delivery conditions
composites at high temperature
standard
no current standard is superseded ISBN 978 058049954 8 £28.00 members, £56.00 non-members ACE/6/-/3
supersedes BS EN 10130:1999 ISBN 0 580 49900 6 £34.00 members, £68.00 non-members
under inert atmosphere. Determination of flexural strength
ISE/10
supersedes DD ENV 12788:1998 ISBN 0 580 49862 X £34.00 members, £68.00 non-members RPI/13
BS EN 10300:2005 BS EN 3716:-
Steel tubes and fittings for onshore
Aerospace series. Connector,
and offshore pipelines. Bitumen hot
single-way with triaxial interface,
applied materials for external
BS EN 12916:2006 (BS 2000-391:2006)
for transmission of digital data
coating
Petroleum products. Determination
supersedes BS 4147:1980 ISBN 0 580 49877 8
of aromatic hydrocarbon types in
£68.00 members, £136.00 non-members
performance liquid
BS EN 3716-005:2006 Crimp receptacle. Product
middle distillates. High
ISE/16/-/11
standard
no current standard is superseded ISBN 978 058049955 5 £28.00 members, £56.00 non-members
refractive index detection
supersedes BS EN 12916:2000 ISBN 0 580 49803 4
BS EN 12012:-
£17.48 members, £23.30 non-members
Plastics and rubber machines. Size
ACE/6/-/3
chromatography method with
reduction machines
PTI/13
BS EN ISO 4618:2006
BS EN 12012-4:2006
BS EN 13234:2006
Paints and varnishes. Terms and
Safety requirements for
Advanced technical ceramics.
definitions
agglomerators
Mechanical properties of ceramic
supersedes BS EN 971-1:1996, BS EN ISO 4618-2:2000 and BS EN ISO 4618-3:2000 ISBN 0 580 49555 8 £74.00 members, £148.00 non-members STI/11
no current standard is superseded ISBN 0 580 49788 7 £34.00 members, £68.00 non-members
composites at ambient temperature. Evaluation of the resistance to crack propagation by
MCE/3/2
supersedes DD ENV 13234:2000 ISBN 0 580 49864 6 £34.00 members, £68.00 non-members
BS EN 12372:2006 BS EN ISO 5840:2005 Cardiovascular implants. Cardiac valve prostheses
supersedes BS 6444-1:1990 and BS EN 12006-1:1999 ISBN 0 580 49872 7 £74.00 members, £148.00 non-members CH/150/2 BS EN PUBLICATIONS
notch sensitivity testing
Natural stone test methods.
RPI/13
Determination of flexural strength under concentrated load
supersedes BS EN 12372:1999 ISBN 978 058049920 3 £34.00 members, £68.00 non-members B/545
Page 5 of 71
BS EN 13235:2006
BS EN 13981:-
BS EN 14358:2006
Advanced technical ceramics.
Aluminium and aluminium alloys.
Timber structures. Calculation of
Mechanical properties of ceramic
Products for structural railway
characteristic 5-percentile values
composites at high temperature
applications. Technical conditions
and acceptance criteria for a
under inert atmosphere.
for inspection and delivery
sample
no current standard is superseded ISBN 978 058049962 3 £28.00 members, £56.00 non-members
Determination of creep behaviour
supersedes DD ENV 13235:2000 ISBN 0 580 49863 8 £34.00 members, £68.00 non-members
BS EN 13981-4:2006 Forgings
RPI/13
B/518
no current standard is superseded ISBN 0 580 49832 8 £49.00 members, £98.00 non-members
BS EN 13307:-
BS EN 14439:2006
NFE/35
no current standard is superseded ISBN 978 058049963 0 £64.00 members, £128.00 non-members
Timber blanks and semi-finished profiles for non-structural uses
Cranes. Safety. Tower cranes
BS EN 14220:2006 Timber and wood-based materials
MHE/3/5
BS EN 13307-1:2006
in external windows, external door
Requirements
leaves and external doorframes.
no current standard is superseded ISBN 0 580 49753 4 £34.00 members, £68.00 non-members
Requirements and specifications
BS EN 14452:2005
no current standard is superseded ISBN 0 580 49754 2 £49.00 members, £98.00 non-members
Devices to prevent pollution by
B/543
backflow of potable water. Pipe interrupter with atmospheric vent
B/543
and moving element DN 10 to DN 20. Family D, type B
BS EN ISO 13705:2006 Petroleum, petrochemical and
BS EN 14221:2006
natural gas industries. Fired
Timber and wood-based materials
heaters for general refinery service
in internal windows, internal door
supersedes BS EN ISO 13705:2002 ISBN 0 580 49790 9
leaves and internal doorframes.
£106.00 members, £212.00 non-members
PSE/17/-/6
no current standard is superseded ISBN 0 580 49769 0 £34.00 members, £68.00 non-members
B/505/4
Requirements and specifications
no current standard is superseded ISBN 0 580 49755 0
BS EN 14512:2006 Tanks for the transport of
£49.00 members, £98.00 non-members
dangerous goods. Tank equipment
B/543 BS EN 13803:-
for the transport of liquid chemicals. Hinged manhole cover
Railway applications. Track. Track alignment design parameters.
BS EN 14255:-
Track gauges 1435 mm and wider
Measurement and assessment of personal exposures to incoherent optical radiation
BS EN 13803-2:2006
and neckrings with pivoting bolts
no current standard is superseded ISBN 0 580 49880 8 £28.00 members, £56.00 non-members AUE/18
Switches and crossings and comparable alignment design
BS EN 14255-4:2006
situations with abrupt changes of
Terminology and quantities used in
curvature
UV-, visible and IR-exposure
no current standard is superseded ISBN 978 058049961 6
measurements
£64.00 members, £128.00 non-members
RAE/2/-/3
BS EN PUBLICATIONS
no current standard is superseded ISBN 0 580 49676 7 £34.00 members, £68.00 non-members CPL/34/10
BS EN 14620:Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0$0DC and -165$0DC
Page 6 of 71
BS EN 14620-1:2006
BS EN 14704:-
BS EN 14885:2006
General
Determination of the elasticity of
Chemical disinfectants and
supersedes BS 7777-1:1993 ISBN 0 580 49775 5 £56.00 members, £112.00 non-members
fabrics
antiseptics. Application of European standards for chemical
PVE/15
disinfectants and antiseptics
BS EN 14704-3:2006
no current standard is superseded ISBN 0 580 49757 7 £56.00 members, £112.00 non-members
Narrow fabrics
no current standard is superseded ISBN 978 058049964 7 £34.00 members, £68.00 non-members
BS EN 14620-2:2006 Metallic components
supersedes BS 7777-2:1993 ISBN 0 580 49776 3 £68.00 members, £136.00 non-members
CH/216 TCI/24 BS EN 14932:2006
PVE/15
Plastics. Stretch thermoplastic
BS EN 14879:-
films for wrapping bales.
Organic coating systems and
Requirements and test methods
linings for protection of industrial
BS EN 14620-3:2006
apparatus and plants against
Concrete components
corrosion caused by aggressive
supersedes BS 7777-3:1993 ISBN 0 580 49777 1 £49.00 members, £98.00 non-members
media
PVE/15
no current standard is superseded ISBN 978 058049966 1 £56.00 members, £112.00 non-members PRI/75
BS EN 14879-2:2006
BS EN 14982:2006
Coatings on metallic components
Plastics piping systems.
no current standard is superseded ISBN 978 058049918 0 £68.00 members, £136.00 non-members
BS EN 14620-4:2006 Insulation components
supersedes BS 7777-3:1993 ISBN 0 580 49778 X £56.00 members, £112.00 non-members
Thermoplastics shafts or risers for inspection chambers and
ISE/16
PVE/15
BS EN 14879-3:2006 Coatings on concrete components
£68.00 members, £136.00 non-members
Testing, drying, purging and
BS EN 14984:2006
ISE/16
cool-down
no current standard is superseded ISBN 0 580 49779 8 £34.00 members, £68.00 non-members
stiffness
no current standard is superseded ISBN 0 580 49721 6 £34.00 members, £68.00 non-members PRI/88/1/P1
no current standard is superseded ISBN 978 058049917 3
BS EN 14620-5:2006
manholes. Determination of ring
Liming materials. Determination of product effect on soil pH. Soil incubation method
BS EN ISO 14880:-
PVE/15
no current standard is superseded ISBN 0 580 49825 5 £49.00 members, £98.00 non-members
Optics and photonics. Microlens arrays
CII/37
BS EN 14673:2006
BS EN ISO 14880-2:2006
Safety of machinery. Safety
Test methods for wavefront
requirements for hydraulically
BS EN 14987:2006
aberrations
powered open die hot forging presses for the forging of steel and non-ferrous metals
no current standard is superseded ISBN 0 580 49756 9 £64.00 members, £128.00 non-members
no current standard is superseded ISBN 978 058049965 4
Plastics. Evaluation of disposability
£56.00 members, £112.00 non-members
Test scheme for final acceptance
CPW/172
MCE/23
in waste water treatment plants. and specifications
no current standard is superseded ISBN 0 580 49792 5 £28.00 members, £56.00 non-members PRI/21
BS EN PUBLICATIONS
Page 7 of 71
DD CEN/TS 14997:2006
BS EN 15035:2006
BS EN 15205:2006
Characterization of waste.
Heating boilers. Special
Determination of hexavalent
Leaching behaviour tests.
requirements for oil fired room
chromium in corrosion protection
Influence of pH on leaching with
sealed units up to 70 kW
layers. Qualitative analysis
continuous pH-control
no current standard is superseded ISBN 978 058049906 7 £56.00 members, £112.00 non-members
no current standard is superseded ISBN 0 580 49888 3 £28.00 members, £56.00 non-members
no current standard is superseded ISBN 0 580 49885 9 £28.00 members, £56.00 non-members
RHE/10
STI/33
B/508/3 DD CEN/TS 15084:2006
BS EN 15207:2006
DD CEN/TS 15022:-
Liming materials. Guide to the
Tanks for transport of dangerous
Copper and copper alloys.
determination of the lime
goods. Plug/socket connection and
Determination of tin content
requirement
supply characteristics for service
no current standard is superseded ISBN 0 580 49802 6 £17.00 members, £34.00 non-members
equipment in hazardous areas with
DD CEN/TS 15022-4:2006 Medium tin content. Flame atomic
24 V nominal supply voltage
CII/37
absorption spectrometry method (FAAS)
no current standard is superseded ISBN 978 058049968 5 £34.00 members, £68.00 non-members
AUE/18
no current standard is superseded ISBN 978 058049914 2 £13.00 members, £26.00 non-members
BS EN 15109:2006 Surface active agents.
NFE/34
DD CEN/TS 15023:-
Determination of the active matter
DD CEN/TS 15211:2006
content of
Health informatics. Mapping of
alkylamidopropylbetaines
hierarchical message descriptions
no current standard is superseded ISBN 0 580 49886 7
to XML
no current standard is superseded ISBN 0 580 49732 1
£34.00 members, £68.00 non-members
Copper and copper alloys. Determination of nickel content
CII/34
£56.00 members, £112.00 non-members
IST/35 DD CEN/TS 15023-3:2006
BS EN 15146:2006
Flame atomic absorption spectrometry method (FAAS)
no current standard is superseded ISBN 978 058049912 8 £17.00 members, £34.00 non-members
NFE/34
Solid softwood panelling and
DD CEN/TS 15231:2006
cladding. Machined profiles without
Open data communication in
tongue and groove
building automation, controls and
no current standard is superseded ISBN 978 058049967 8 £34.00 members, £68.00 non-members
building management. Mapping between Lonworks and BACnet
B/543 DD CEN/TS 15025:2006
no current standard is superseded ISBN 0 580 49889 1 £34.00 members, £68.00 non-members RHE/16
Copper and copper alloys.
BS EN 15202:2006
Determination of magnesium
LPG equipment and accessories.
content. Flame atomic absorption spectrometry method (FAAS)
no current standard is superseded ISBN 978 058049913 5 £17.00 members, £34.00 non-members
NFE/34
Essential operational dimensions
BS EN 15238:2006
for LPG cylinder valve outlet and
Soil improvers and growing media.
associated equipment connections
Determination of quantity for
no current standard is superseded ISBN 978 058049916 6 £64.00 members, £128.00 non-members
materials with particle size greater than 60 mm
PVE/19
no current standard is superseded ISBN 978 058049921 0 £34.00 members, £68.00 non-members AW/20
BS EN PUBLICATIONS
Page 8 of 71
DD CEN/TS 15451:2006
DD CEN/TS 15478:2006
BS EN ISO 18753:2005
Fertilizers. Determination of
Fertilizers. Determination of total
Fine ceramics (advanced
chelating agents. Determination of
nitrogen in urea
ceramics, advanced technical
iron chelated by EDDHSA by ion
no current standard is superseded ISBN 0 580 49798 4 £17.00 members, £34.00 non-members
ceramics). Determination of
pair chromatography
no current standard is superseded ISBN 0 580 49830 1 £17.00 members, £34.00 non-members
absolute density of ceramic powders by pyknometer
CII/37 CII/37 DD CEN/TS 15479:2006
supersedes BS EN 725-7:1996 ISBN 0 580 49892 1 £34.00 members, £68.00 non-members RPI/13
Fertilizers. Spectrophotometric
DD CEN/TS 15452:2006
determination of biuret in urea
Fertilizers. Determination of
no current standard is superseded ISBN 0 580 49797 6 £13.00 members, £26.00 non-members
chelating agents. Determination of iron chelated by o,p-EDDHA by reversed phase HPLC
BS EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical
CII/37
no current standard is superseded ISBN 0 580 49829 8
ceramics). Determination of fracture toughness of monolithic
£17.00 members, £34.00 non-members
ceramics at room temperature by
BS EN ISO 15535:2006
CII/37
the surface crack in flexure (SCF)
General requirements for
method
establishing anthropometric
no current standard is superseded ISBN 0 580 49897 2 £56.00 members, £112.00 non-members
databases
supersedes BS EN ISO 15535:2003 ISBN 978 058049969 2 £49.00 members, £98.00 non-members
DD CEN/TS 15475:2006 Fertilizers. Determination of ammoniacal nitrogen
no current standard is superseded ISBN 0 580 49801 8
RPI/13 PH/9/4 BS EN ISO 18757:2005
£17.00 members, £34.00 non-members
CII/37
Fine ceramics (advanced
BS EN ISO 17201:-
ceramics, advanced technical
Acoustics. Noise from shooting
ceramics). Determination of
ranges
specific surface area of ceramic
DD CEN/TS 15476:2006
powders by gas adsorption using
Fertilizers. Determination of nitric
the BET method
BS EN ISO 17201-2:2006
and ammoniacal nitrogen
supersedes BS EN 725-6:1996 ISBN 0 580 49891 3 £34.00 members, £68.00 non-members
Estimation of muzzle blast and
according to Devarda
projectile sound by calculation
no current standard is superseded ISBN 0 580 49800 X £17.00 members, £34.00 non-members CII/37
no current standard is superseded ISBN 0 580 49766 6 £56.00 members, £112.00 non-members
RPI/13
EH/1/3
BS EN ISO 20776:Clinical laboratory testing and in
DD CEN/TS 15477:2006
vitro diagnostic test systems.
BS EN ISO 18453:2005
Fertilizers. Determination of the
Susceptibility testing of infectious
Natural gas. Correlation between
water-soluble potassium content
agents and evaluation of
water content and water dew point
no current standard is superseded ISBN 0 580 49799 2
performance of antimicrobial
no current standard is superseded ISBN 0 580 49782 8
£13.00 members, £26.00 non-members
CII/37
susceptibility test devices
£56.00 members, £112.00 non-members
PTI/15
BS EN PUBLICATIONS
Page 9 of 71
BS EN ISO 20776-1:2006
BS EN ISO 21182:2006
BS EN ISO 24013:2006
Reference method for testing the in
Light conveyor belts. Determination
Optics and photonics. Lasers and
vitro activity of antimicrobial agents
of the coefficient of friction
laser-related equipment.
against rapidly growing aerobic
supersedes BS EN 1724:1999 ISBN 0 580 49807 7 £34.00 members, £68.00 non-members
Measurement of phase retardation
bacteria involved in infectious diseases
no current standard is superseded ISBN 0 580 49791 7 £49.00 members, £98.00 non-members
of optical components for polarized laser radiation
PRI/67
CH/212
BS EN ISO 21183:Light conveyor belts
BS EN ISO 21178:2006
no current standard is superseded ISBN 0 580 49898 0 £49.00 members, £98.00 non-members CPW/172
BS EN 50116:2006 BS EN ISO 21183-1:2006
Light conveyor belts. Determination
Information technology equipment.
Principal characteristics and
of electrical resistances
Routine electrical safety testing in
applications
supersedes BS EN 1637:1999 ISBN 0 580 49809 3 £49.00 members, £98.00 non-members
production
supersedes BS EN 873:1997 ISBN 0 580 49808 5 PRI/67
£28.00 members, £56.00 non-members
PRI/67
supersedes BS EN 50116:1996 which remains current ISBN 0 580 49860 3 £28.00 members, £56.00 non-members EPL/108
BS EN ISO 21179:2006 BS EN ISO 21549:-
Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
Health informatics. Patient
BS EN 50470:-
healthcard data
Electricity metering equipment (A.C.)
supersedes BS EN 1718:1999 ISBN 0 580 49804 2 BS EN ISO 21549-4:2006
£28.00 members, £56.00 non-members
PRI/67
BS EN ISO 21180:2006
Extended clinical data
BS EN 50470-1:2006
no current standard is superseded ISBN 0 580 49789 5 £49.00 members, £98.00 non-members
General requirements, tests and test conditions. Metering equipment (class indexes A, B and
IST/35
Light conveyor belts. Determination
no current standard is superseded ISBN 0 580 49810 7 £68.00 members, £136.00 non-members
of the maximum tensile strength
supersedes BS EN 1722:1999 ISBN 0 580 49805 0 £34.00 members, £68.00 non-members
BS EN ISO 22675:2006 Prosthetics. Testing of ankle-foot
PRI/67
Light conveyor belts. Determination
Requirements and test methods
BS EN 50470-2:2006 Particular requirements. Electromechanical meters for
CH/168
of the relaxed elastic modulus
active energy (class indexes A and B)
supersedes BS EN 1723:2000 ISBN 0 580 49806 9 £34.00 members, £68.00 non-members PRI/67
BS EN PUBLICATIONS
PEL/13
devices and foot units.
no current standard is superseded ISBN 0 580 48654 0 £78.00 members, £156.00 non-members
BS EN ISO 21181:2006
C)
no current standard is superseded ISBN 0 580 49811 5 £49.00 members, £98.00 non-members PEL/13
Page 10 of 71
BS EN 50470-3:2006
BS EN 60745:-
BS EN 60870:-
Particular requirements. Static
Hand-held motor-operated electric
Telecontrol equipment and
meters for active energy (class
tools. Safety
systems
BS EN 60745-1:2006
BS EN 60870-5-104:2006
General requirements
Transmission protocols. Network
supersedes BS EN 606745-1:2003 which remains current ISBN 0 580 49842 5 £96.00 members, £192.00 non-members CPL/61/6
access for IEC 60870-5-101 using
indexes A, B and C)
no current standard is superseded ISBN 0 580 49812 3 £56.00 members, £112.00 non-members PEL/13
BS EN 55015:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting
standard transport profiles
supersedes BS EN 60870-5-104:2001 ISBN 0 580 49781 X £74.00 members, £148.00 non-members PEL/57
BS EN 60745-2-15:2006
and similar equipment
supersedes BS EN 55015:2001 which remains current ISBN 978 058050001 5 £64.00 members, £128.00 non-members
GEL/210/11
Particular requirements for hedge
BS EN 60904:-
trimmers
Photovoltaic devices
supersedes BS EN 50144-2-15:2001 which remains current ISBN 0 580 49841 7 £49.00 members, £98.00 non-members
Measurement of photovoltaic
CPL/61/6
BS EN 60749:-
and immunity measuring apparatus
Semiconductor devices.
and methods
current-voltage characteristics
supersedes BS EN 60904-1:1993 ISBN 0 580 49894 8 £34.00 members, £68.00 non-members
BS EN 55016:Specification for radio disturbance
BS EN 60904-1:2006
GEL/82
Mechanical and climatic test methods
BS EN 60958:-
BS EN 55016-1-3:2006 Radio disturbance and immunity
Digital audio interface
BS EN 60749-35:2006
measuring apparatus. Ancillary
Acoustic microscopy for plastic
equipment. Disturbance power
supersedes BS EN 55016-1-3:2004 which remains current ISBN 978 058050002 2 £56.00 members, £112.00 non-members GEL/210/12
encapsulated electronic
BS EN 60958-3:2006
components
Consumer applications
no current standard is superseded ISBN 0 580 49739 9 £49.00 members, £98.00 non-members
EPL/47
supersedes BS EN 60958-3:2003 which remains current ISBN 0 580 49677 5 £68.00 members, £136.00 non-members EPL/100
BS EN 60216:BS EN 60749-39:2006
Electrical insulating materials. Thermal endurance properties
Measurement of moisture
BS EN 61000:-
diffusivity and water solubility in
Electromagnetic compatibility
organic materials used for
(EMC)
BS EN 60216-6:2006
semiconductor components
Determination of thermal
partially supersedes BS EN 60749:1999 ISBN 0 580 49866 2
BS EN 61000-4-5:2006
£28.00 members, £56.00 non-members
techniques. Surge immunity test
endurance indices (TI and RTE) of an insulating material using the fixed time frame method
EPL/47
supersedes BS EN 60216-6:2004 ISBN 0 580 49815 8 £68.00 members, £136.00 non-members GEL/112
BS EN PUBLICATIONS
Testing and measurement
supersedes BS EN 61000-4-5:1995 which remains current ISBN 0 580 49796 8 £68.00 members, £136.00 non-members GEL/210/12
Page 11 of 71
BS EN 62002-1:2006 BS EN 61204:-
Interface specification
BS EN 62317:-
Low voltage power supplies, D.C.
no current standard is superseded ISBN 0 580 49813 1 £68.00 members, £136.00 non-members
Ferrite cores. Dimensions
Output
EPL/100
BS EN 61204-7:2006 Safety requirements
no current standard is superseded ISBN 0 580 49893 X £96.00 members, £192.00 non-members
Interface conformance testing
no current standard is superseded ISBN 0 580 49814 X £56.00 members, £112.00 non-members
EPL/51
EPL/100
BS EN 61747:-
E-cores
partially supersedes BS EN 62358:2004 ISBN 978 058049915 9 £34.00 members, £68.00 non-members
BS EN 62002-2:2006
PEL/22
BS EN 62317-8:2006
BS EN 62384:2006 D.C. or A.C. supplied electronic
Liquid crystal display devices
control gear for LED modules.
BS EN 62047:-
Performance requirements
Semiconductor devices.
BS EN 61747-3:2006
no current standard is superseded ISBN 0 580 49678 3 £34.00 members, £68.00 non-members CPL/34/3
Micro-electromechanical devices
Liquid crystal display (LCD) cells. Sectional specification
supersedes BS EN 61747-3:2000 ISBN 0 580 49819 0 £34.00 members, £68.00 non-members
BS EN 62047-2:2006 Tensile testing method of thin film materials
EPL/47
BS EN 61937:-
no current standard is superseded ISBN 0 580 49740 2 £34.00 members, £68.00 non-members
BS ENs IMPLEMENTED BY AMENDMENT BS EN ISO 13628:-
EPL/47
Digital audio. Interface for
Petroleum and natural gas industries. Design and operation of
non-linear PCM encoded audio bitstreams applying IEC 60958
subsea production systems
BS EN 62076:2006 Industrial electroheating installations. Test methods for
BS EN 61937-5:2006
BS EN ISO 13628-10:2006
induction channel and induction
Non-linear PCM bitstreams
Specification for bonded flexible
crucible furnaces
according to the DTS (digital
supersedes BS 7690:1993 and BS EN 60646:1999 ISBN 0 580 48991 4 £34.00 members, £68.00 non-members PEL/27
theatre systems) format(s)
supersedes BS EN 61937-5:2002 which remains current ISBN 978 058049903 6 £34.00 members, £68.00 non-members
pipe
BS EN ISO 13679:2006 Petroleum and natural gas industries. Procedures for testing casing and tubing connections
EPL/100 BS EN 62271:BS EN 62002:Mobile and portable DVB-T/H radio
High-voltage switchgear and
BS EN ISO 16712:2006
controlgear
Water quality. Determination of acute toxicity of marine or
access
estuarine sediment to amphipods
BS EN 62271-3:2006 Digital interfaces based on IEC 61850
no current standard is superseded ISBN 0 580 49820 4
BS EN ISO 17294:Water quality. Application of inductively coupled plasma mass
£68.00 members, £136.00 non-members
spectrometry (ICP-MS)
PEL/17/1 BS ENs IMPLEMENTED BY AMENDMENT
Page 12 of 71
BS EN ISO 17294-1:2006
BS ISO 4831:2006
BS ISO 6886:2006
General guidelines
Microbiology of food and animal
Animal and vegetable fats and oils.
feeding stuffs. Horizontal method
Determination of oxidative stability
for the detection and enumeration
(accelerated oxidation test)
of coliforms. Most probable number
supersedes BS 684-2.25:1997 ISBN 0 580 49768 2 £34.00 members, £68.00 non-members
BS EN ISO 19739:2005 Natural gas. Determination of
technique
sulfur compounds using gas
supersedes BS 5763-3:1991 ISBN 0 580 48505 6 £34.00 members, £68.00 non-members
chromatography
AW/307 AW/9 BS ISO/IEC 7816:-
BS IMPLEMENTATIONS
Identification cards. Integrated
BS ISO 368:2006
DD ISO/TS 4869:-
Spinning preparatory, spinning and
Acoustics. Hearing protectors
circuit cards
doubling (twisting) machinery.
BS ISO/IEC 7816-3:2006
Tubes for ring-spinning, doubling and twisting spindles, taper 1:38
DD ISO/TS 4869-5:2006
Cards with contacts. Electrical
and 1:64
Method for estimation of noise
interface and transmission
supersedes BS ISO 368:1991 ISBN 0 580 49839 5
reduction using fitting by
protocols
£28.00 members, £56.00 non-members
inexperienced test subjects
no current standard is superseded ISBN 0 580 49881 6 £28.00 members, £56.00 non-members
no current standard is superseded ISBN 0 580 49823 9 £68.00 members, £136.00 non-members
TCI/33
IST/17 EH/1/1
BS ISO 871:2006 BS ISO 8068:2006
Plastics. Determination of ignition temperature using a hot-air furnace
BS ISO 5700:2006
Lubricants, industrial oils and
supersedes BS ISO 871:1996 ISBN 0 580 49847 6 £28.00 members, £56.00 non-members
Wheeled tractors for agriculture
related products (class L). Family T
and forestry. Roll-over protective
(turbines). Specification for
structures (ROPS). Static test
lubricating oils for turbines
method and acceptance conditions
no current standard is superseded ISBN 0 580 49884 0 £49.00 members, £98.00 non-members
PRI/26
supersedes BS 5947:1992 ISBN 978 058049957 9 £56.00 members, £112.00 non-members
BS ISO 4306:Cranes. Vocabulary
PTI/7 AGE/6 BS ISO 8422:2006
BS ISO 4306-5:2005 Bridge and gantry cranes
no current standard is superseded ISBN 0 580 49899 9 £34.00 members, £68.00 non-members
BS ISO 6743:-
Sequential sampling plans for
Lubricants, industrial oils and
inspection by attributes
related products (class L).
supersedes BS 6001-4:1994 ISBN 978 058049584 1 £56.00 members, £112.00 non-members
Classification
MHE/3/3
SS/5
BS ISO 6743-5:2006 Family T (turbines)
supersedes BS 6413-5:1988 ISBN 0 580 49878 6
BS ISO 9911:2006 Agricultural irrigation equipment.
£28.00 members, £56.00 non-members
Manually operated small plastics
PTI/7
valves
no current standard is superseded ISBN 0 580 49770 4 £34.00 members, £68.00 non-members AGE/30
BS IMPLEMENTATIONS
Page 13 of 71
BS ISO 13300:-
BS ISO 14572:2006
BS ISO/IEC 9973:2006
Sensory analysis. General
Road vehicles. Round, screened
Information technology. Computer
guidance for the staff of a sensory
and unscreened, 60 V and 600 V
graphics, image processing and
evaluation laboratory
multi-core sheathed cables. Test
environmental data representation.
methods and requirements for
Procedures for registration of items
basic and high-performance cables
BS ISO 13300-1:2006
supersedes BS ISO/IEC 9973:1994 ISBN 0 580 49845 X £56.00 members, £112.00 non-members
no current standard is superseded ISBN 0 580 49727 5 £49.00 members, £98.00 non-members
Staff responsibilities
IST/31
no current standard is superseded ISBN 0 580 49873 5 £34.00 members, £68.00 non-members
AUE/16 AW/12
BS ISO 11076:2006
BS ISO/IEC 14888:-
Aircraft. Ground-based de-icing/anti-icing methods with
BS ISO 13300-2:2006
fluids
Recruitment and training of panel
supersedes BS ISO 11076:2000 ISBN 0 580 49003 3
leaders
£56.00 members, £112.00 non-members
ACE/57
Information technology. Security techniques. Digital signatures with appendix
no current standard is superseded ISBN 0 580 49874 3 £34.00 members, £68.00 non-members
BS ISO/IEC 14888-3:2006 Discrete logarithm based
AW/12
mechanisms
supersedes BS ISO/IEC 14888-3:1998 ISBN 0 580 49846 8
BS ISO 11534:2006 Iron ores. Determination of tin.
BS ISO 13674:-
Flame atomic absorption
Road vehicles. Test method for the
spectrometric method
quantification of on-centre handling
no current standard is superseded ISBN 978 058049905 0 £34.00 members, £68.00 non-members
£74.00 members, £148.00 non-members
IST/33
BS ISO 15003:2006 BS ISO 13674-2:2006
ISE/58
BS ISO 11629:2004
Agricultural engineering. Electrical
Transition test
and electronic equipment. Testing
no current standard is superseded ISBN 978 058049911 1 £34.00 members, £68.00 non-members
resistance to environmental conditions
AUE/15
Cranes. Measurement of the mass of a crane and its components
no current standard is superseded ISBN 0 580 49895 6 £28.00 members, £56.00 non-members
supersedes BS 7691:1994 ISBN 0 580 49817 4 £49.00 members, £98.00 non-members AGE/6
DD ISO/TS 13899:Steel. Determination of Mo, Nb and
MHE/3
W contents in alloyed steel.
BS ISO/IEC 15434:2006
Inductively coupled plasma atomic
Information technology. Automatic
emission spectrometric method
identification and data capture
BS ISO 12082:2006
techniques. Syntax for
Processed cheese and processed
high-capacity ADC media
DD ISO/TS 13899-3:2005
cheese products. Calculation of the
supersedes BS ISO/IEC 15434:2005 ISBN 0 580 49857 3 £49.00 members, £98.00 non-members
Determination of W content
content of added citrate
no current standard is superseded ISBN 0 580 49855 7
emulsifying agents and
£17.00 members, £34.00 non-members
acidifiers/pH-controlling agents, expressed as citric acid
IST/34 ISE/18
supersedes BS 770-11:1997 ISBN 0 580 49865 4 £28.00 members, £56.00 non-members AW/5
BS IMPLEMENTATIONS
Page 14 of 71
BS ISO 15553:2006
BS ISO 17499:2006
BS ISO 19904:-
Water quality. Isolation and
Carbonaceous materials used in
Petroleum and natural gas
identification of Cryptosporidium
the production of aluminium.
industries. Floating offshore
oocysts and Giardia cysts from
Determination of baking level
structures
water
expressed by equivalent
no current standard is superseded ISBN 0 580 49843 3 £64.00 members, £128.00 non-members
temperature
EH/3/4
BS ISO 19904-1:2006
no current standard is superseded ISBN 0 580 49840 9 £28.00 members, £56.00 non-members
Monohulls, semi-submersibles and spars
CII/24 BS ISO/IEC 16085:2006 Systems and software engineering.
DD ISO/TS 17996:2006
Life cycle processes. Risk
Cheese. Determination of
management
rheological properties by uniaxial
supersedes BS ISO/IEC 16085:2004 ISBN 978 058049977 7 £56.00 members, £112.00 non-members
compression at constant
B/525/12
BS ISO 20302:2006 Health informatics. Health cards.
displacement rate
IST/15
no current standard is superseded ISBN 0 580 49856 5 £96.00 members, £192.00 non-members
Numbering system and registration
no current standard is superseded ISBN 0 580 49828 X £28.00 members, £56.00 non-members
procedure for issuer identifiers
AW/5 BS ISO 17087:2006
no current standard is superseded ISBN 978 058049910 4 £28.00 members, £56.00 non-members IST/35
Specifications for adhesives used for finger joints in non-structural
BS ISO 18898:2006
lumber products
Rubber. Calibration and verification
no current standard is superseded ISBN 0 580 49844 1
of hardness testers
£49.00 members, £98.00 non-members
PRI/52
BS ISO 21308:-
no current standard is superseded ISBN 0 580 49765 8
Road vehicles. Product data
£49.00 members, £98.00 non-members
bodywork manufacturers (BEP)
exchange between chassis and
PRI/20 BS ISO 21308-2:2006
BS ISO 17321:Graphic technology and
DD ISO/TS 19138:2006
photography. Colour
Geographic information. Data
characterization of digital still
quality measures
cameras (DSCs)
no current standard is superseded ISBN 0 580 49896 4 £64.00 members, £128.00 non-members
BS ISO 17321-1:2006
Dimensional bodywork exchange parameters
no current standard is superseded ISBN 0 580 49774 7 £74.00 members, £148.00 non-members
AUE/9 IST/36
Stimuli, metrology, and test
BS ISO 21427:-
procedures
no current standard is superseded ISBN 978 058049907 4 £56.00 members, £112.00 non-members
Water quality. Evaluation of
BS ISO 19903:2006
genotoxicity by measurement of
Petroleum and natural gas
the induction of micronuclei
industries. Fixed concrete offshore
CPW/42
structures
no current standard is superseded ISBN 978 058049909 8
BS ISO 21427-2:2006 (BS 6068-5.45:2006)
£84.00 members, £168.00 non-members
Mixed population method using the
B/525/12
cell line V79
no current standard is superseded ISBN 0 580 49771 2 £49.00 members, £98.00 non-members EH/3/5 BS IMPLEMENTATIONS
Page 15 of 71
BS ISO 21485:2006
BS ISO 22896:2006
BS ISO/IEC 24730:-
Textile machinery. Draw frame for
Road vehicles. Deployment and
Information technology. Real-time
cotton spinning. Vocabulary and
sensor bus for occupant safety
locating systems (RTLS)
principles of construction
systems
no current standard is superseded ISBN 0 580 49838 7 £34.00 members, £68.00 non-members
no current standard is superseded ISBN 0 580 49772 0 £68.00 members, £136.00 non-members TCI/33
BS ISO/IEC 24730-2:2006 2,4 GHz air interface protocol
AUE/16
BS ISO 21543:2006
BS ISO 23058:2006
Milk products. Guidelines for the
Milk and milk products. Ovine and
application of near infrared
caprine rennets. Determination of
spectrometry
total milk-clotting activity
no current standard is superseded ISBN 0 580 49764 X £56.00 members, £112.00 non-members
no current standard is superseded ISBN 0 580 49763 1 £34.00 members, £68.00 non-members AW/5
no current standard is superseded ISBN 978 058049975 3 £56.00 members, £112.00 non-members IST/34
DD ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification
AW/5
and design, installation, testing and inspection
BS ISO 21988:2006
BS ISO 23273:-
Abrasion-resistant cast irons.
Fuel cell road vehicles. Safety
Classification
specifications
no current standard is superseded ISBN 978 058049976 0 £64.00 members, £128.00 non-members PSE/17/-/6
BS ISO 23273-3:2006
DD ISO/TS 26844:2006
Protection of persons against
Milk and milk products.
electric shock
Determination of antimicrobial
no current standard is superseded ISBN 0 580 49773 9
residues. Tube diffusion test
no current standard is superseded ISBN 978 058049901 2 £49.00 members, £98.00 non-members
ISE/35
BS ISO 22032:2006 (BS 6068-2.99:2006)
no current standard is superseded ISBN 0 580 49853 0
£34.00 members, £68.00 non-members
Water quality. Determination of
PEL/69
selected polybrominated diphenyl
£17.00 members, £34.00 non-members
AW/5
ethers in sediment and sewage sludge. Method using extraction
BS ISO 23833:2006
and gas chromatography/mass
Microbeam analysis. Electron
DD ISO/PAS 28003:2006
spectrometry
probe microanalysis (EPMA).
Security management systems for
no current standard is superseded ISBN 978 058049971 5 £56.00 members, £112.00 non-members
Vocabulary
the supply chain. Requirements for
no current standard is superseded ISBN 978 058049972 2 £68.00 members, £136.00 non-members
bodies providing audit and
EH/3/2
certification of supply chain security management systems
CII/9 BS ISO 22779:2006 Metallic coatings. Physical
BS ISO 24342:2006
vapour-deposited coatings of
Resilient floor-covering tiles.
aluminium. Specification and test
Determination of side length, edge
methods
straightness and squareness
SME/32
no current standard is superseded ISBN 0 580 49793 3 £34.00 members, £68.00 non-members
no current standard is superseded ISBN 0 580 49822 0 £49.00 members, £98.00 non-members
STI/33
BS IMPLEMENTATIONS
no current standard is superseded ISBN 0 580 49876 X £56.00 members, £112.00 non-members
PRI/60
Page 16 of 71
BS IEC 62275:2006
PD CEN/TR 15310-4:2006
PD ISO/TR 17165-2:2006
Cable management systems.
Guidance on procedures for
Recommended practices for
Cable ties for electrical installations
sample packaging, storage,
hydraulic hose assemblies
no current standard is superseded ISBN 0 580 49682 1 £49.00 members, £98.00 non-members
preservation, transport and
no current standard is superseded ISBN 0 580 49867 0 £49.00 members, £98.00 non-members MCE/18/-/4
delivery
PEL/213
no current standard is superseded ISBN 0 580 49836 0 £49.00 members, £98.00 non-members B/508/3
PUBLISHED DOCUMENTS
AEROSPACE SERIES
PD 6689:2006
PD CEN/TR 15310-5:2006
BS N:-
Surface dressing. Guidance on the
Guidance on the process of
Aircraft oxygen systems and
use of BS EN 12271
defining the sampling plan
equipment
no current standard is superseded ISBN 0 580 49837 9 £64.00 members, £128.00 non-members
no current standard is superseded ISBN 0 580 48851 9 £34.00 members, £68.00 non-members
BS 5N 100-5:2006
B/508/3
B/510/2
Guide to fire and explosion hazards associated with oxygen, including handling, storage and
PD CEN/TR 15310:-
PD CEN/TR 15472:2006
replenishment
Characterization of waste.
Postal services. Measurement of
Sampling of waste materials
transit times for parcels by the use
supersedes BS 4N 100-5:1999 ISBN 0 580 49312 1 £34.00 members, £68.00 non-members
of a track and trace system
no current standard is superseded ISBN 0 580 49750 X £49.00 members, £98.00 non-members
PD CEN/TR 15310-1:2006 Guidance on selection and application of criteria for sampling
ACE/38
SVS/4
PUBLICLY AVAILABLE SPECIFICATIONS
under various conditions
no current standard is superseded ISBN 0 580 49833 6 £74.00 members, £148.00 non-members B/508/3
PD CISPR/TR 16:-
PAS 69:2006
Specification for radio disturbance
Guidelines for the specification and
and immunity measuring apparatus
installation of vehicle security
and methods
barriers
no current standard is superseded ISBN 0 580 49683 X £49.00 members, £98.00 non-members
PD CEN/TR 15310-2:2006 Guidance on sampling techniques
PD CISPR/TR 16-4-5:2006
no current standard is superseded ISBN 0 580 49834 4 £68.00 members, £136.00 non-members
Uncertainties, statistics and limit modelling. Conditions for the use of alternative test methods
B/508/3
no current standard is superseded ISBN 0 580 49875 1 £64.00 members, £128.00 non-members
PD CEN/TR 15310-3:2006 sub-sampling in the field
PD ISO/TR 17165:-
no current standard is superseded ISBN 0 580 49835 2 £49.00 members, £98.00 non-members
Hydraulic fluid power. Hose
Guidance on codes of practice, standardised methods and regulations for cell-based
GEL/210/12
Guidance on procedures for
PAS 83:2006
therapeutics
no current standard is superseded ISBN 0 580 49088 2 £18.00 members, £18.00 non-members
assemblies
B/508/3
PUBLICLY AVAILABLE SPECIFICATIONS
Page 17 of 71
PAS 90:2006
KIT 189
BS 6068-2.91:-
Specification for safe working
BS 6465 sanitary installations kit
Physical, chemical and
practice for on-site maintenance
no current standard is superseded ISBN 0 580 49890 5 £95.00 members, £190.00 non-members
biochemical methods. Application
and repair of industrial trucks
no current standard is superseded ISBN 0 580 48698 2 £30.00 members, £30.00 non-members
of inductively coupled plasma mass spectrometry (ICP-MS)
B/503 BS 6068-5.37:Biological methods. Determination
PAS 105:2007 Recovered paper sourcing and quality. Code of practice
supersedes PAS 105:2005 ISBN 0 580 45246 8 £0.00 members, £0.00 non-members
SPECIALIST BOOKS FROM BSI BIP 2047:2006 Winning with fire safety. A guide for
AMENDMENTS TO BRITISH STANDARDS
of acute toxicity of marine or estuarine sediment to amphipods
BS 848:Fans for general purposes
BS 7531:2006 Rubber bonded fibre jointing for
BS 848-2.2:-
industrial and aerospace purposes.
Methods of noise testing. Determination of fan sound power
Specification CORRIGENDUM 1 AMD 16859
levels under standardized
AMD 16859
PSE/2
laboratory conditions. Reverberant room method
BS 7858:2006
business
no current standard is superseded ISBN 0 580 44095 8 £55.00 members, £55.00 non-members
BS 4875:-
Security screening of individuals
Strength and stability of furniture
employed in a security environment. Code of practice CORRIGENDUM 1 AMD 16681 AMD 16681
BS 4875-7:2006 BIP 2089:2006
Domestic and contract storage
A guide to corporate social
furniture. Performance
responsibility
requirements CORRIGENDUM 1 AMD 16830
no current standard is superseded ISBN 0 580 49310 5 £19.95 members, £19.95 non-members
GW/3
BS 8468:Respiratory equipment for use
AMD 16830
FW/0
against chemical, biological, radiological and nuclear (CBRN) agents
BS 5499:BIP 2102:2006
Graphical symbols and signs.
Environment management report.
Safety signs, including fire safety
BS 8468-1:2006
Trends and best practice in waste
signs
Positive pressure, self-contained,
management
no current standard is superseded ISBN 0 580 48412 2 £95.00 members, £95.00 non-members
open-circuit breathing apparatus.
BS 5499-11:2002
Specification CORRIGENDUM 1 AMD 16807
Water safety signs
AMD 16807
PH/4
AMENDMENT 1 AMD 16783 AMD 16783
PH/8/2
KITS, SETS, PACKS AND SERIES
BS 8888:2006 Technical product specification
BS 6068:Water quality
(TPS). Specification CORRIGENDUM 1 AMD 16851 AMD 16851
TDW/4
AMENDMENTS TO BRITISH STANDARDS
Page 18 of 71
BS EN 26:1998
BS EN ISO 4126:-
Gas fired instantaneous water
Safety devices for protection
BS EN 13458:-
heaters for the production of
against excessive pressure
Cryogenic vessels. Static vacuum insulated vessels
domestic hot water, fitted with atmospheric burners AMENDMENT 3 AMD 16769
BS EN ISO 4126-1:2004
AMD 16769
GSE/29
Safety valves
BS EN 13458-2:2002
CORRIGENDUM 1 AMD 16817 AMD 16817
Design, fabrication, inspection and
PVE/12
testing CORRIGENDUM 1 AMD 16823 AMD 16823
BS EN 30:-
PVE/18
Domestic cooking appliances
BS EN ISO 4126-2:2003
burning gas
Bursting disc safety devices
CORRIGENDUM 2 AMD 16820 AMD 16820
BS EN 30-1-3:2003
BS EN 13530:-
PVE/12
Safety. Appliances having a glass
Cryogenic vessels. Large transportable vacuum insulated vessels
ceramic hotplate AMENDMENT 1 AMD 16803
BS EN 10028:-
AMD 16803
GSE/35
Flat products made of steels for
BS EN 13530-2:2002
pressure purposes
Design, fabrication, inspection and testing CORRIGENDUM 1 AMD 16816
BS EN 542:2003 BS EN 10028-2:2003
Adhesives. Determination of
AMD 16816
Non-alloy and alloy steels with
density CORRIGENDUM 1 AMD 16855
PVE/18
specified elevated temperature
AMD 16855
PRI/52
properties CORRIGENDUM 1 AMD 16824
BS EN 14041:2004
AMD 16824
ISE/73/2 BS EN 543:2003
Resilient, textile and laminate floor coverings. Essential characteristics CORRIGENDUM 2 AMD 16776 AMD 16776
Adhesives. Determination of
BS EN 10028-4:2003
apparent density of powder and
PRI/60
Nickel alloy steels with specified
granule adhesives CORRIGENDUM 1 AMD 16856
low temperature properties CORRIGENDUM 1 AMD 16825
AMD 16856
PRI/52
BS EN 14125:2004
AMD 16825
ISE/73/2
pipework for underground installation at petrol filling stations AMENDMENT 1 AMD 16792
BS EN 1251:BS EN 12092:2001
Cryogenic vessels. Transportable
Thermoplastic and flexible metal
AMD 16792
Adhesives. Determination of
vacuum insulated vessels of not
PVE/21
viscosity CORRIGENDUM 1 AMD 16854
more than 1000 litres volume
AMD 16854
BS EN 14398:-
PRI/52
BS EN 1251-2:2000
Cryogenic vessels. Large transportable non-vacuum
Design, fabrication, inspection and testing CORRIGENDUM 1 AMD 16822
insulated vessels
BS EN 13229:2001 Inset appliances including open
AMD 16822
PVE/18
fires fired by solid fuels. Requirements and test methods CORRIGENDUM 1 AMD 16546 AMD 16546
RHE/28
AMENDMENTS TO BRITISH STANDARDS
Page 19 of 71
BS EN 14398-2:2003
BS EN 60335-2-43:2003
BS EN 60684-3-212:2006
Design, fabrication, inspection and
Particular requirements for
Heat-shrinkable polyolefin
testing CORRIGENDUM 1 AMD 16821
appliances for clothes dryers and
sleevings CORRIGENDUM 1 AMD 16815
towel rails CORRIGENDUM 1 AMD 16827
AMD 16821
PVE/18
AMD 16815
AMD 16827
GEL/15/3/5 CPL/61/07
BS EN ISO 15605:2004
BS EN 60684-3-233:2006
Adhesives. Sampling
BS EN 60371:-
Heat-shrinkable fluoroelastomer
CORRIGENDUM 1 AMD 16857
Insulating materials based on mica
sleeving, flame retarded, fluid
AMD 16857
resistant, shrink ratio 2:1 CORRIGENDUM 1 AMD 16839
PRI/52
AMD 16839
BS EN 60371-3:-
GEL/15/3/5
Specifications for individual
BS EN ISO/IEC 17025:2005
materials
General requirements for the
BS EN 60998:-
competence of testing and calibration laboratories CORRIGENDUM 1 AMD 16767
BS EN 60371-3-2:2006
Connecting devices for low-voltage
AMD 16767
Mica paper
circuits for household and similar
CORRIGENDUM 1 AMD 16814 AMD 16814
purposes
CAS/1
GEL/15/3/11 BS EN 60998-2-3:2004
BS EN 60060:High voltage test techniques
Particular requirements for
BS EN 60371-3-5:2006
connecting devices as separate
Glass-backed mica paper with an
entities with insulation-piercing
epoxy resin binder for
BS EN 60060-3:2006
clamping units CORRIGENDUM 1 AMD 16841
post-impregnation (VPI) CORRIGENDUM 1 AMD 16813
Definitions and requirements for
AMD 16841
AMD 16813
on-site tests CORRIGENDUM 1 AMD 16784
PEL/23/2 GEL/15/3/11
AMD 16784
PEL/42
BS EN 61000:BS EN 60664:-
Electromagnetic compatibility
Insulation coordination for
BS EN 60068:-
(EMC)
equipment within low-voltage
Environmental testing
systems
BS EN 61000-4-4:2004 BS EN 60068-2-78:2002
Testing and measurement
BS EN 60664-4:2006
Test methods. Test Cab. Damp
techniques. Electrical fast
Consideration of high-frequency
heat, steady state CORRIGENDUM 1 AMD 15891
transient/burst immunity test CORRIGENDUM 1 AMD 16840
voltage stress CORRIGENDUM 1 AMD 16804
AMD 15891
GEL/104
BS EN 60335:Household and similar electrical
AMD 16840
AMD 16804
GEL/210/12 GEL/109 BS EN 61009:-
BS EN 60684:Flexible insulating sleeving
appliances. Safety
Residual current operated circuit-breakers with integral overcurrent protection for
BS EN 60684-3:Specifications for individual types
household and similar uses (RCBO's)
of sleeving
AMENDMENTS TO BRITISH STANDARDS
Page 20 of 71
BS EN 61009-1:2004
BS ISO 13628:-
BS ISO 19739:2004
General rules
Petroleum and natural gas
Natural gas. Determination of
CORRIGENDUM 1 AMD 16594 AMD 16594
industries. Design and operation of
sulfur compounds using gas
subsea production systems
chromatography AMENDMENT 1 AMD 16788
PEL/23/1
AMD 16788
PTI/15
BS ISO 13628-10:2005
BS EN 62040:-
Specification for bonded flexible
Uninterruptible power systems
pipe AMENDMENT 1 AMD 16775
(UPS)
CP 2010:Code of practice for pipelines
AMD 16775
PSE/17/-/4 BS EN 62040-2:2006 CP 2010-2:1970
Electromagnetic compatibility (EMC) requirements CORRIGENDUM 1 AMD 16838 AMD 16838
PEL/22
BS ISO 13679:2002
Design and construction of steel
Petroleum and natural gas
pipelines in land AMENDMENT 1 AMD 16832
industries. Procedures for testing
AMD 16832
casing and tubing connections AMENDMENT 1 AMD 16774
PSE/17
AMD 16774
BS ISO 7540:2006
PSE/17
Ground paprika (Capsicum annuum L.). Specification CORRIGENDUM 1 AMD 16834
UPDATED BRITISH STANDARDS
DD ISO/TS 16489:2006
AMD 16834
AW/7
BS 5410:-
Water quality. Guidance for
Code of practice for oil firing
establishing the equivalency of results CORRIGENDUM 1 AMD 16787
BS ISO TR 10064:-
BS 5410-1:1997
AMD 16787
Code of inspection practice
EH/3/2
Installations up to 45 kW output capacity for space heating and hot
BS ISO TR 10064-2:1996 Inspection related to radial
BS ISO 16712:2005 (BS 6068-5.37:2005)
composite deviations, runout, tooth
Water quality. Determination of
thickness and backlash CORRIGENDUM 2 AMD 16771
acute toxicity of marine or
water supply purposes AMENDMENT 2
£68.00 members, £136.00 non-members
RHE/13
estuarine sediment to amphipods AMENDMENT 1 AMD 16801
AMD 16771
MCE/5
BS EN 1603:1997
AMD 16801
EH/3/5
Thermal insulating products for building applications.
BS ISO 13347:-
Determination of dimensional
Industrial fans. Determination of
BS ISO 17294:-
stability under constant normal
fan sound power levels under
Water quality. Application of
laboratory conditions
standardized laboratory conditions
inductively coupled plasma mass
(23$0DC/50% relative humidity) AMENDMENT 2
spectrometry (ICP-MS)
BS ISO 13347-2:2004 (BS 848-2.2:2004) Reverberant room method
£28.00 members, £56.00 non-members
B/540
BS ISO 17294-1:2004 (BS 6068-2.91:2004) General guidelines
CORRIGENDUM 1 AMD 16790 AMD 16790
MCE/17
AMENDMENT 1 AMD 16802 AMD 16802
EH/3/2
UPDATED BRITISH STANDARDS
Page 21 of 71
BS EN 1606:1997
BS EN 13041:2000
BS EN 60335-1:2002
Thermal insulating products for
Soil improvers and growing media.
General requirements
building applications.
Determination of physical
AMENDMENT 4
Determination of compressive
properties. Dry bulk density, air
creep AMENDMENT 2
volume, water volume, shrinkage
£96.00 members, £192.00 non-members
CPL/61
value and total pore space AMENDMENT 1
£34.00 members, £68.00 non-members
B/540
£49.00 members, £98.00 non-members
BS EN 60371:-
AW/20
Insulating materials based on mica
BS EN 1609:1997 Thermal insulating products for
BS EN 50117:-
building applications.
Coaxial cables
BS EN 60371-3:Specifications for individual materials
Determination of dimensional short term water absorption by partial
BS EN 50117-1:2002
immersion AMENDMENT 2
£28.00 members, £56.00 non-members
B/540
Generic specification
BS EN 60371-3-4:1996
AMENDMENT 1
Polyester film-backed mica paper
£34.00 members, £68.00 non-members
with a B-stage epoxy resin binder AMENDMENT 1
EPL/46
£28.00 members, £56.00 non-members
GEL/15/3/11
BS EN 12430:1998 BS EN 50216:-
Thermal insulating products for
Power transformer and reactor
building applications.
BS EN 60371-3-6:1996
fittings
Determination of behaviour under point load AMENDMENT 1
Gloss-backed mica paper with a B-stage epoxy resin binder AMENDMENT 1
BS EN 50216-3:2002
£28.00 members, £56.00 non-members
£34.00 members, £68.00 non-members
Protective relay for hermetically
B/540
sealed liquid-immersed
GEL/15/3/11
transformers and reactors without gaseous cushion AMENDMENT 2
BS EN 12431:1998 Thermal insulating products for
PD CISPR/TR 16:-
£28.00 members, £56.00 non-members
building applications.
Specification for radio disturbance
PEL/14
Determination of thickness for
and immunity measuring apparatus and methods
floating floor insulating products AMENDMENT 1
BS EN 50216-5:2002
£28.00 members, £56.00 non-members
PD CISPR/TR 16-4-3:2004
Liquid level, pressure and flow
B/540
Uncertainties, statistics and limit
indicators, pressure relief devices
modelling. Statistical
and dehydrating breathers AMENDMENT 3
BS EN 12525:2000
considerations in the determination of EMC compliance of
£34.00 members, £68.00 non-members
Agricultural machinery. Front
PEL/14
loaders. Safety AMENDMENT 1
mass-produced products AMENDMENT 1
£56.00 members, £112.00 non-members
£49.00 members, £98.00 non-members
BS EN 60335:-
AGE/6
GEL/210/12
Household and similar electrical appliances. Safety
SPECIAL ANNOUNCEMENTS
SPECIAL ANNOUNCEMENTS
Page 22 of 71
BS MA 7
ISO/DIS 8873:-
BS 2853:1957
Specification for manholes with
Rigid cellular plastics.
Specification for the design and
bolted covers
Spray-applied polyurethane foam
testing of steel overhead runway
The withdrawal of this standard
for thermal insulation
beams
B/525/31
was announced in the December 2006 edition of Update Standards.
ISO/DIS 8873-2
A note of objection has since been
BS 4481:-
Application
received, and the committee have
Bonded abrasive products
This draft international standard
decided that its withdrawal should
has now been circulated by
be reviewed.
ISO/TC61/SC10, of which the UK
Contact: Caroline Langdon Email:
[email protected]
BS 4481-2:1983
is currently an observer member
SME/32
Specification for dimensions of
since efforts within the industry are
grinding wheels and segments
more centralized within CEN.
MTE/13
However copies of the DIS are
ISO/FDIS 1138:2007
available from the Programme
Rubber compounding ingredients.
Manager until 27th March, 2007.
BS 4678:-
Contact: Alex Price Email:
[email protected]
Cable trunking
Carbon black. Determination of sulfur content
PRI/72
This publication was originally an
BS 4678-2:1973
amendment (ISO
Steel underfloor (duct) trunking
1138:1981/Damd1), however after
ISO/DIS 8873-3
the DIS stage it was decided that it
Test methods
would be changed at FDIS stage to
This draft international standard
a full revision of the standard. The
has now been circulated by
BS 4678-4:1982
UK intend to adopt this revised
ISO/TC61/SC10, of which the UK
Specification for cable trunking
standard if it is now approved at
is currently an observer member
made of insulating material
the FDIS stage.
since efforts within the industry are
Contact: Charlotte Armstrong Email:
[email protected]
more centralized within CEN.
PEL/213
PEL/213
However copies of the DIS are
PRI/50
BS 4999:-
available from the Programme
General requirements for rotating
Manager until 27th March, 2007.
electrical machines
Contact: Alex Price Email:
[email protected]
ISO/DIS 1922
PRI/72
Rigid cellular plastics.
BS 4999-140:1987
Determination of shear strength
Specification for voltage regulation
This draft international standard has now been circulated by
and parallel operation of A.C.
is currently an observer member
BRITISH STANDARDS PROPOSED FOR CONFIRMATION
since efforts within the industry are
BS 449:-
more centralized within CEN.
Specification for the use of
BS 5950:-
However copies of the DIS are
structural steel in building
Structural use of steelwork in
ISO/TC61/SC10, of which the UK
synchronous generators
PEL/2
building
available from the Programme Manager until 27th March, 2007.
BS 449-2:1969
Contact: Alex Price Email:
[email protected]
Metric units
PRI/72
BS 5950-1:2000
B/525/31
Code of practice for design. Rolled and welded sections
B/525/31
BRITISH STANDARDS PROPOSED FOR CONFIRMATION
Page 23 of 71
BS 5950-5:1998
BS ISO 14152:2001
BS 3680-7:2000
Code of practice for design of cold
Neutron radiation protection
Specification of equipment for the
formed thin gauge sections
shielding. Design principles and
measurement of water level
B/525/31
CPI/113/5
considerations for the choice of appropriate materials
NCE/2 BS 5950-6:1995
BS 4359:-
Code of practice for design of light
Determination of the specific
gauge profiled steel sheeting
surface area of powders
B/525/31
BS 5950-9:1994 Code of practice for stressed skin
BRITISH STANDARDS REVIEWED AND CONFIRMED BS 2955:1993
BS 4359-2:1982
Glossary of terms relating to
Recommended air permeability methods
particle technology
design
LBI/37
LBI/37 B/525/31
BS ISO 8529:Reference neutron radiations
BS 3406:-
BS 4359-4:1995
Methods for determination of
Recommendations for methods of
particle size distribution
determination of metal surface area using gas adsorption techniques
BS ISO 8529-1:2001
BS 3406-1:1986
Characteristics and methods of
LBI/37
Guide to powder sampling
production
LBI/37 NCE/2
BS 4604:Specification for the use of high
BS ISO 11929:Determination of the detection limit
BS 3406-4:1993
strength friction grip bolts in
Guide to microscope and image
structural steelwork. Metric series
analysis methods
and decision threshold for ionizing
LBI/37
radiation measurements
BS 4604-1:1970 General grade
BS 3406-9:1997 BS ISO 11929-4:2001
Recommendations for the filter
Fundamentals and application to
blockage method (mesh
measurements by use of
obscuration)
B/521
BS 4604-2:1970
LBI/37
linear-scale analogue ratemeters,
Higher grade (parallel shank)
B/521
without the influence of sample treatment
NCE/2
BS 3625:1963 Specification for eyepiece and
BS 5531:1988
screen graticules for the
Code of practice for safety in
BS ISO 12006:-
determination of the particle size of
erecting structural frames
Building construction. Organization
powders
B/521 LBI/37
of information about construction works
BS 5950:BS 3680:-
Structural use of steelwork in
BS ISO 12006-2:2001
Measurement of liquid flow in open
building
Framework for classification of
channels
information
B/500
BRITISH STANDARDS REVIEWED AND CONFIRMED
Page 24 of 71
BS 5950-2:2001
BS 6043-2.4:2000
Specification for materials,
Analysis by X-ray fluorescence
fabrication and erection. Rolled
spectroscopy
BS 6043-3.1:Sampling
CII/24
and welded sections
B/521 BS 6043-3.1.1:1999 Sampling of cathodes
BS 6043-2.9:2000 BS 5950-3.1:1990
Determination of particle size
Design in composite construction.
distribution
CII/24 CII/24
Code of practice for design of
BS 6043-3.1.2:1999
simple and continuous composite
Sampling of anodes
beams
B/525/4
CII/24
BS 6043-2.10:1996 Determination of electrical resistivity of calcined coke
BS 5950-4:1994
BS 6043-3.3:2000
granules
CII/24
Code of practice for design of
Determination of the bulk density (apparent density) of cathode
composite slabs with profiled steel
blocks and prebaked anodes using
sheeting
B/525/4
BS 6043-2.11:1995
a dimensions method
CII/24
Determination of volatile matter content
CII/24
BS 6043:-
BS 6043-3.4:2000
Methods of sampling and test for
Determination of the open porosity
carbonaceous materials used in aluminium manufacture
BS 6043-2.13:1996
and bulk density (apparent density)
Determination of tapped bulk
of cathode blocks and prebaked
density of green and calcined coke
CII/24
BS 6043-1:-
anodes by a hydrostatic method
CII/24
Electrode pitch
BS 6043-1.10:2000
BS 6043-2-18:2001
BS 6043-3.5.1:2000
Determination of total sulfur by the
Determination of flexural strength.
Eschka method
Determination of volatile matter
CII/24
content
Three point method
CII/24
CII/24
BS 6043-1.11:2000
BS 6043-2.20:-
BS 6043-3.6:2000
Carboxy reactivity of calcined coke
Determination of electrical resistivity of cathode blocks and
Determination of the atomic C/H ratio of the quinoline-insoluble
prebaked anodes at ambient
BS 6043-2.20.1:2001
material
CII/24
temperature
Determination of the reactivity by a
CII/24
loss in mass method
CII/24 BS 6043-3.8.1:2001
BS 6043-1.13:2000 Determination of sulfur content
CII/24
Carboxy reactivity of prebaked
BS 6043-2.21.1:2001
anodes. Determination of the
Determination of the reactivity by
reactivity by a loss in mass method
determination of ignition
BS 6043-2:-
CII/24
temperature
CII/24
Electrode coke
BS 6043-3:Electrodes
BRITISH STANDARDS REVIEWED AND CONFIRMED
Page 25 of 71
BS 6043-3.9.1:2002
BS 6920-2.2.3:2000
BS 7591-4:1993
Chemical reactivity to air of
Method of testing odours and
Method of evaluation by liquid
prebaked anodes. Determination of
flavours imparted to water by
expulsion
the reactivity by a loss in mass
hoses for conveying water for food
method
LBI/37
and drink preparation
CII/24
EH/6 BS 7843:Guide to the acquisition and
BS 6043-4.1:2000
BS 6920-2.3:2000
Cold ramming pastes. Methods of
Appearance of water
management of meteorological precipitation data
EH/6
sampling
CII/24 BS 7843-3.1:1999 BS 6920-2.4:2000
Specification for raingauges.
BS 6161:-
Growth of aquatic micro-organisms
Storage raingauges
Methods of test for anodic
test
CPI/113 EH/6
oxidation coatings on aluminium and its alloys
BS 7898:1997 BS 6920-3:2000
Guide to hydrometric data
High temperature tests
BS 6161-18:1991
EH/6
Determination of surface abrasion
management
CPI/113
resistance
STI/32
BS 7022:1988
BS ISO 9083:2001
Guide for geophysical logging of
Calculation of load capacity of spur
BS 6920:-
boreholes for hydrogeological
and helical gears. Application to
Suitability of non-metallic products
purposes
CPI/113
for use in contact with water
marine gears
MCE/5
intended for human consumption with regard to their effect on the quality of the water
BS 7405:1991
BS ISO 10300:-
Guide to selection and application
Calculation of load capacity of
of flowmeters for the measurement
bevel gears
of fluid flow in closed conduits
BS 6920-2:-
CPI/30
Methods of test
BS ISO 10300-1:2001 Introduction and general influence
BS 7591:-
BS 6920-2.2:-
factors
Porosity and pore size distribution
Odour and flavour of water
MCE/5
of materials
BS ISO 10300-2:2001
BS 6920-2.2.2:2000 Method of testing odours and flavours imparted to water by
BS 7591-1:1992
Calculation of surface durability
Method of evaluation by mercury
(pitting)
MCE/5
porosimetry
hoses and composite pipes and
LBI/37
tubes
EH/6
BS ISO 10300-3:2001 BS 7591-2:1992
Calculation of tooth root strength
MCE/5
Method of evaluation by gas adsorption
LBI/37
BRITISH STANDARDS REVIEWED AND CONFIRMED
Page 26 of 71
BS ISO 14606:2000
BS 7568-27:1993
BS 2011-2.1Ca:1977
Surface chemical analysis. Sputter
Guide pillars. Type B, end-locking
Damp heat, steady state
depth profiling. Optimization using
pillars
GEL/104 MTE/12
layered systems as reference materials
BS 2011-2.1Cb:1990
CII/60
BS ISO 14706:2000
BS 7568-28:1993
Damp heat, steady state, primarily
Guide pillars. Type C, pillars with
for equipment
GEL/104
taper lead and bush
MTE/12
Surface chemical analysis. Determination of surface elemental
BS 2782:-
contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
CII/60
BS 7568-29:1993
Methods of testing plastics.
Guide pillars. Type D, end-locking
Chemical properties
pillars with flange
MTE/12 BS 2782-4:Method 454D:1978 Determination of volatile matter
BS C 15:1960 Specification for coupling
(including water) of PVC resins
BRITISH STANDARDS WITHDRAWN
dimensions for aircraft-to-tractor tow bar connections
ACE/57
PRI/21
BS 684:Methods of analysis of fats and
BS 3970:-
fatty oils
Sterilizing and disinfecting equipment for medical products
BRITISH STANDARDS DECLARED OBSOLESCENT
BS 684-2.25:1997
BS 7044:-
Other methods. Determination of
BS 3970-6:1993
Artificial sports surfaces
oxidative stability (accelerated
Specification for sterilizers using low-temperature steam with
oxidation test)
AW/307
formaldehyde
LBI/35
BS 7044-4:1991 Specification for surfaces for
BS 770:-
multi-sports use
PRI/57
Methods for chemical analysis of
BS 4147:1980
cheese
Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including
BRITISH STANDARDS PROPOSED FOR WITHDRAWAL
BS 770-11:1997
BS 7568:-
acidifiers/pH-controlling agents in
Press tools
processed cheese and processed
suitable primers where required
Calculation of the content of added
ISE/16
citrate emulsifying agents and
BS 5350:Methods of test for adhesives
cheese products
AW/5 BS 7568-25:1993
BS 5350-B1:1978
Guide pillars. Types
MTE/12
BS 2011:-
Determination of density
PRI/52
Basic environmental testing procedures
BS 7568-26:1993
BS 5350-B8:1990
Guide pillars. Type A, straight
BS 2011-2.1:-
pillars
MTE/12
BRITISH STANDARDS WITHDRAWN
Tests
Determination of viscosity
PRI/52
Page 27 of 71
BS 5350-E2:1979 Guide to sampling
PRI/52
BS 6444-1:1990
BS 7777-2:1993
Methods of test for heart valve
Specification for the design and
substitutes and requirements for
construction of single, double and
their packaging and labelling
full containment metal tanks for the
CH/150/2 BS 5524:-
storage of liquefied gas at temperatures down to -165$0DC
Gas-insulated metal-enclosed
PVE/15
switchgear for rated voltages of
BS 7087:-
72.5 kV and above
Herbs and spices ready for food
BS 7777-3:1993
use
Recommendations for the design
BS 5763:Methods for microbiological
BS 7087-11:1996
examination of food and animal
Specification for ground paprika
and construction of prestressed and reinforced concrete tanks and
AW/7
feeding stuffs
tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings
BS 7208:-
BS 5763-3:1991
PVE/15
Contact lenses
Enumeration of coliforms. Most probable number technique
AW/9
BS EN 725:-
BS 7208-9:-
Advanced technical ceramics.
Optics and optical instruments.
BS 5947:1992
Determination of strains for rigid
Method of test for static loading of
contact lenses
Methods of test for ceramic powders
protective cabs and frames for agricultural wheeled tractors,
BS EN 725-6:1996
BS 7690:1993
including acceptance conditions
AGE/6
Determination of the specific
Test methods for induction channel
surface area
furnaces
RPI/13
PEL/27 BS 6331:Mounting dimensions of single rod
BS EN 725-7:1996
BS 7691:1994
double acting hydraulic cylinders
Determination of the absolute
Methods for testing resistance to
density
environmental conditions of
BS 6331-4:1985
electronic equipment used in
Specification for 63 bar series,
agriculture and horticulture
RPI/13
AGE/6
including associated components
MCE/18
BS EN 873:1997 Light conveyor belts. Principal characteristics and applications
BS 7777:BS 6413:-
Flat-bottomed, vertical, cylindrical
Lubricants, industrial oils and
storage tanks for low temperature
related products (class L)
service
PRI/67
BS EN 971:Paints and varnishes. Terms and
BS 6413-5:1988
definitions for coating materials
BS 7777-1:1993
Classification for family T (turbines)
Guide to the general provisions
PTI/7
applying for design, construction,
BS EN 971-1:1996 General terms
installation and operation
PVE/15 BS 6444:-
STI/11
Cardiovascular implants
BRITISH STANDARDS WITHDRAWN
Page 28 of 71
BS EN 1637:1999
BS EN ISO 21269:2004
DD ENV 61112:2002
Light conveyor belts. Test methods
Hexagon socket head cap screws
Blankets of insulating material for
for the measurement of the
with metric fine pitch thread
electrical purposes
FME/9/3
electrical resistances
PEL/78
PRI/67 BS EN 29333:1992
BS EN 61300:-
BS EN 1718:1999
Specification for dental brazing
Fibre optic interconnecting devices
Light conveyor belts. Test method
materials
and passive components. Basic
CH/106/2
for the measurement of the
test and measurement procedures
electrostatic field generated by a running light conveyor belt
PRI/67
BS EN 60298:1996
BS EN 61300-2:-
A.C. metal-enclosed switchgear
Tests
and controlgear for rated voltages
BS EN 1722:1999
above 1 kV and up to and including
Light conveyor belts. Test method
52 kV
BS EN 61300-2-3:1997
PEL/17/1
for the determination of the
Static shear load
GEL/86/2
maximum tensile strength
PRI/67 BS EN 60517:1997 (BS 5524:1992)
BS EN 61300-2-20:1997
BS EN 1723:2000
Gas-insulated metal-enclosed
Climatic sequence
Light conveyor belts. Method of
switchgear for rated voltages of
test for the determination of the
72.5 kV and above
GEL/86/2 PEL/17/1
relaxed elastic modulus
BS EN 61300-2-31:1997
PRI/67
Nuclear radiation
GEL/86
BS EN 60646:1999 BS EN 1724:1999
Test methods for crucible induction
Light conveyor belts. Test method
furnaces
PEL/27
for the determination of the
BS ISO/IEC 13250:2000 Information technology. SGML
coefficient of friction
PRI/67
applications. Topic maps
IST/41
BS EN 60947:Specification for low-voltage switchgear and controlgear
BS EN ISO 9340:1999 (BS 7208-9:1999)
BS ISO/IEC 14496:Information technology. Coding of
Optics and optical instruments.
audio-visual objects
BS EN 60947-5-1:1998
Contact lenses. Determination of
Control circuit devices and
strains for rigid contact lenses
MCE/18
switching elements.
BS ISO/IEC 14496-16:2004
Electromechanical control circuit
Animation framework extension
devices
BS EN 12006:-
PEL/17/2
(AFX)
IST/37
Non-active surgical implants. Particular requirements for cardiac
DD ENV 61111:2002
and vascular implants
BS IEC 60050:-
Matting of insulating material for
International electrotechnical
electrical purposes
PEL/78
BS EN 12006-1:1999
vocabulary
Heart valve substitutes
CH/150/2
BS IEC 60050-351:1998 Automatic control
GEL/1
BRITISH STANDARDS WITHDRAWN
Page 29 of 71
BS 2975:-
BS 7273-3 (Revision)
PD 6534:1993
Sampling and analysis of glass
Electrical actuation of pre-action
Guide to the use in the UK of DD
making sands
water mist and sprinkler systems
will supersede BS 7273-3:2000
ENV 206:1992. Concrete.
FSH/12/4
Performance, production, placing
BS 2975-2
and compliance criteria
B/517/1
Methods for chemical analysis
will partially supersede BS 2975:1988 LBI/36/5
BS 7273-5 Electrical actuation of water mist systems
BRITISH STANDARDS UNDER REVIEW
FSH/12/4 BS 3108:-
BS 4607:-
Sampling and analysis of glass
Non-metallic conduits and fittings
making limestone and dolomite
BS 7858:2006/Amendment 1 Security screening of individuals
for electrical installations
employed in a security
BS 3108-1 (Revision) BS 4607-5:1982
Specification, methods for
Specification for rigid conduits,
sampling and physical testing
environment. Code of practice
GW/3
will supersede BS 3108:1980
fittings and components of
LBI/36/1
insulating material
BS 9004 Gas meter box. Specification
PEL/213
GSE/25 BS 3108-2 (Revision) Methods for chemical analysis
BS EN 1369:1997
DD XXXX
will supersede BS 3108:1980
Founding. Magnetic particle
LBI/36/1
inspection
equipment rated for use by children
ISE/NFE/9
and young people in educational
BS 5335:-
establishments
Specification for quilts
BS EN 1370:1997
Safety requirements for electrical
EPL/66
Founding. Surface roughness inspection by visual tactile
BS 5335-1:1991/Amendment 1
comparators
Quilts with fillings other than
ISE/NFE/9
BS EN 40:Lighting columns
feather and or down
TCI/66 BS EN 40-3-3 (Revision)
BS EN 1754:1997 Magnesium and magnesium alloys.
BS 5444 (Revision)
Magnesium and magnesium alloy
Recommendations for preparation
anodes, ingots and castings.
of copy for microcopying
Design and verification. Verification by calculation
will supersede BS EN 40-3-3:2003 B/509/50
will supersede BS 5444:1977
Designation system
IDT/1
NFE/35
BS EN 338 (Revision) BS EN ISO 4516:2002
BS 6105:-
Metallic and other inorganic
Blanks for superabrasive
coatings. Vickers and Knoop
cutting-off wheels
microhardness tests
will supersede BS EN 338:2003 B/518
BS EN 384 (Revision)
STI/33
NEW WORK STARTED
Structural timber. Strength classes
BS 7273:-
Structural timber. Determination of
Code of practice for the operation
characteristic values of mechanical
of fire protection measures
properties and density
will supersede BS EN 384:2004 B/518
NEW WORK STARTED
Page 30 of 71
BS EN 408 (Revision)
BS EN 3155:-
BS EN 12737:2004/Amendment 1
Timber structures. Structural
Aerospace series. Electrical
Precast concrete products. Floor
timber and glued laminated timber.
contacts used in elements of
slats for livestock
Determination of some physical
connection
B/524
and mechanical properties
will supersede BS EN 408:2003 B/518
BS EN 3155-005:2006/Corrigendum
BS EN 12790 (Revision)
Contacts, electrical, female, type A,
Child use and care articles. Reclined cradles
crimp, class T. Product standard
BS EN 543:2003/Corrigendum
ACE/6/-/3
will supersede BS EN 12790:2002 CW/41
Adhesives. Determination of apparent density of powder and
BS EN 4496:2005/Corrigendum
granule adhesives
PRI/52
BS EN 13203:-
Aerospace series. Screws, 100$0D
Solar supported gas-fired domestic
countersunk normal head, offset
appliances producing hot water.
cruciform recess, close tolerance
BS EN ISO 661:2005/Corrigendum
Appliances not exceeding 70kW
normal shank, short thread, in
Animal and vegetable fats and oils.
heat input and 500 litres water
titanium alloy, anodized, with
Preparation of test sample
AW/307
storage capacity
aluminium pigmented coating. Classification: 1 100MPa (at ambient temperature) / 315$0DC
ACE/12
DD CEN/TS 1187 (Revision) Test methods for external fire
BS EN 13203-3 Assessment of energy consumption
exposure to roofs
will supersede DD ENV 1187:2002 FSH/22/8
GSE/29
BS EN ISO 10993:Biological evaluation of medical devices
BS EN 13225 Precast concrete products. Linear
BS EN 1194 (Revision)
structural elements
BS EN ISO 10993-5 (Revision)
Timber structures. Glued laminated
B/524
Tests for in vitro cytotoxicity
timber. Strength classes and
will supersede BS EN ISO 10993-5:1999
determination of characteristic values
CH/194
will supersede BS EN 1194:1999
BS EN 13353 (Revision) Solid wood panels (SWP).
B/518
Requirements
will supersede BS EN 13353:2003
BS EN 12369:-
B/541
Wood-based panels. Characteristic
BS EN 1382 (Revision)
values for structural design
Timber structures. Test methods.
BS EN 13354 (Revision)
Withdrawal capacity of timber fasteners
will supersede BS EN 1382:1999 B/518
BS EN 12369-3
Solid wood panels. Bonding
Solid-wood panels
quality. Test method
B/541
will supersede DD CEN/TS 13354:2003 B/541
BS EN 1383 (Revision)
BS EN 12392 (Revision)
Timber structures. Test methods. Pull through resistance of timber fasteners
will supersede BS EN 1383:1999 B/518
Aluminium and aluminium alloys.
BS EN 13369
Wrought and cast materials.
Common rules for precast concrete
Special requirements for materials
products
intended for pressure purposes
B/524
will supersede BS EN 12392:2000 NFE/35
NEW WORK STARTED
Page 31 of 71
BS EN 13566:-
BS EN 14250 (Revision)
BS EN ISO 21809:-
Plastics piping systems for
Timber structures. Product
Petroleum and natural gas
renovation of underground
requirements for prefabricated
industries. External coatings for
non-pressure drainage and
structural members assembled
buried and submerged pipelines
sewerage networks
with punched metal plate fasteners
used in pipeline transportation
will supersede BS EN 14250:2004 B/518
systems
BS EN 13566-3:2002/Amendment 1 Lining with close-fit pipes
PRI/88/3
BS EN ISO 21809-5
BS EN 14354
External concrete coatings
Wood-based panels. Wood veneer
PSE/17/2
floor covering
B/541
BS EN ISO 13628:-
BS EN ISO 23251 (Revision)
Petroleum and natural gas industries. Design and operation of
Petroleum, petrochemical and
BS EN 14647
subsea production systems
natural gas industries.
Calcium aluminate cement.
Pressure-relieving and
composition, specification and
depressuring systems
conformity criteria
BS EN ISO 13628-1:2005/Amendment 1
B/516/6
will supersede BS ISO 23251:2006 PSE/17/-/6
General requirements and recommendations
PSE/17/-/4
BS EN 13747
BS EN 14648
BS EN 50122:-
Building hardware. Fittings for
Railway applications. Fixed
shutters. Requirements and test
installations. Electrical safety,
methods
B/538
Precast concrete products. Floor
earthing and bonding
plates for floor systems
B/524
BS EN 50122-1 (Revision)
BS EN 14651:2005/Amendment 1
Protective provisions relating to
Test method for metallic fibered
BS EN ISO 13855
concrete. Measuring the flexural
Safety of machinery. The
tensile strength (limit or
positioning of protective equipment
proportionality (LOP), residual)
electrical safety and earthing
will supersede BS EN 50122-1:1998 GEL/9/3 B/524
in respect of approach speeds of
BS EN 60352:-
parts of the human body
Solderless connections
will supersede BS EN 999:1999 MCE/3
BS EN 14721:2005/Amendment 1 Test method for metallic fibre
BS EN 14175:Fume cupboards
concrete. Measuring the fibre
BS EN 60352-8
content in fresh and hardened
Compression mount connections. General requirements, test
concrete
B/524
methods and practical guidance
EPL/48
BS EN 14175-1 Vocabulary
DD CEN/TS 15643:-
LBI/18
BS EN 14175-2
Sustainability of construction
BS EN 60512:-
works. Framework for assessment
Connectors for electronic
of integrated building performance
equipment. Tests and measurements
Safety and performance requirements
LBI/18
DD CEN/TS 15643-1 Environmental, health and comfort and life cycle cost performances
B/558
NEW WORK STARTED
Page 32 of 71
BS EN 60512-9-3:2006/Corrigendum
BS EN 61892-7
Endurance tests. Test 9c:
BS EN 61338-1-4:2006/Corrigendum
Hazardous areas
Mechanical operation
General information and test
(engaging/separating) with
conditions. Measurement method
will supersede BS IEC 61892-7:1997 JPEL/18
of complex relative permittivity for
electrical load
EPL/48
dielectric resonator materials at
BS EN 62431
millimetre-wave frequency
EPL/49
Measurement methods for
BS EN 60512-12:-
reflectivity of electromagnetic wave
Soldering tests
absorbers in millimetre wave
BS EN 61391:-
frequency
Ultrasonics. Pulse echo scanners
will supersede DD IEC/PAS 62431:2005
BS EN 60512-12-2:2006/Corrigendum
EPL/46/2
Test 12b: Solderability, wetting,
BS EN 61391-2
soldering iron method
EPL/48
Techniques for measurement of
BS EN ISO XXXXX
maximum depth of visualization
Performance testing of safety
and d the displayed dynamic range
EPL/87 BS EN 60512-12-3:2006/Corrigendum Test 12c: Solderability, de-wetting
devices against excessive pressure
PVE/12 EPL/48
BS EN 61557:Electrical safety in low voltage
BS EN 00124095
distribution systems up to 1000 V
Timber structures. Test methods.
A.C. and 1500 V D.C. Equipment
BS EN 60512-12-4:2006/Corrigendum
Torsional strength and resistance
for testing, measuring or
to driving of screws
monitoring of protective measures
Test 12d: Resistance to soldering
B/518
heat, solder bath method
EPL/48
BS EN 60512-12-5:2006/Corrigendum
BS EN 61557-11
BS EN 00124096
Effectiveness of residual current
Timber structures. Test methods.
monitors (RCMs) type A and type
Withdrawal capacity of punched
B in TT, TN and IT systems
Test 12e: Resistance to soldering
PEL/85
metal plate fasteners
B/518
heat, soldering iron method
EPL/48
BS EN 60601:Medical electrical equipment
BS EN 61892:-
BS ISO 1922
Mobile and fixed offshore units.
Rigid cellular plastic. Determination
Electrical installations
of shear strength
PRI/72 BS EN 61892-3
BS EN 60601-1-8 General requirements for safety. Collateral standard. General
Equipment
BS ISO 4378:-
will supersede BS IEC 61892-3:1999 JPEL/18
Plain bearings. Terms, definitions,
BS EN 61892-6
BS ISO 4378-1
requirements, tests and guidance for alarm systems in medical electrical equipment and medical
Installation
electrical systems
CH/62/1
will supersede BS IEC 61892-6:1999 JPEL/18
classification and symbols
Design, bearing materials and their properties
MCE/12
BS EN 61338:Waveguide type dielectric resonators
NEW WORK STARTED
Page 33 of 71
BS ISO 4378-2
BS ISO 8611-1
Friction and wear
Test methods
MCE/12
BS ISO/IEC 18004:Information technology.
PKW/0
Radio-frequency identification for item management
BS ISO 4378-3
DD ISO/TS 8611-2
Lubrication
Performance requirements and
MCE/12
BS ISO/IEC 18004-4 (Revision)
selection of tests for flat pallets
PKW/0
communications at 2, 45 GHz
will supersede BS ISO/IEC 18004:2000
BS ISO 4869:Acoustics. Hearing protectors
Parameters for air interface
DD ISO/TS 8611-3
IST/34
Maximum working load
PKW/0 BS ISO 4869-2:1995/Corrigendum
BS ISO 18549:-
Estimation of effective A-weighted
Metallic powders. Determination of
sound pressure levels when
BS ISO XXXX
apparent density and flow rate at
hearing protectors are worn
Determination of the emission of
elevated temperatures
PH/7
semi-volatile organic compounds for building products. Micro
BS ISO 18549-1
chamber method
BS ISO 6104:2005/Corrigendum
EH/2/3
Superabrasive products. Rotating
Determination of apparent density at elevated temperatures
grinding tools with diamond or
ISE/65
cubic boron nitride. General
DD ISO/TS 12032
survey, designation and
Document imaging. Statistical
multilingual nomenclature
sampling for document images
BS ISO/IEC 20000:-
IDT/1/2
MTE/13
Information technology. Service management
BS ISO 12776
BS ISO 6105-1:2004/Corrigendum
Pallets. Slip sheets
Manually guided cutting-off in
BS ISO/IEC 20000-3
PKW/0
building and civil engineering
MTE/13
Guide on compliance with ISO/IEC 20000-1
IST/15/-/8
BS ISO 14717 BS ISO 6105-2:2004/Corrigendum
Oil of origanum, Spanish type
Hand-held cutting-off in building
[Coridothymus capitatus (L.) Rchb.
BS ISO 21549:-
f. syn.thymus capitatus (L.)
Health informatics: patient
and civil engineering
MTE/13
Haffmanns. & Link]
AW/54 BS ISO 7590
BS ISO 21549-8
Steel cord conveyor belts. Methods
BS EN ISO 14890:2003/Corrigendum
for the determination of total
Conveyor belts. Specification for
thickness and cover thickness
rubber or plastics covered
PRI/67
Links
IST/35
conveyor belts of textile
BS ISO 22006
construction for general use
PRI/67 BS ISO 8611:-
Quality management systems. Guidelines for the application of
Pallets for materials handling. Flat pallets
healthcard data
ISO 9001:2000 in crop production
BS ISO 16345
AW/90
Cooling towers. Testing and rating for performance
RHE/17
NEW WORK STARTED
Page 34 of 71
BS ISO 22178
BS IEC 60919:-
06/30058730 DC
Intelligent transport systems. Low
Performance of high-voltage D.C.
ISO 12651 Electronic imaging.
speed following systems.
(HVDC) systems
Vocabulary
IDT/1/3
Performance requirements and test procedures
EPL/278
BS IEC 60919-2 06/30111445 DC
Faults and switching
PEL/22 BS ISO 26910:-
BS ISO 369 Machine tools. Symbols for indications appearing
Springs. Shot peening
on machine tools
DD IEC/TS 62239 (Revision)
MTE/1
Process management for avionics.
BS ISO 26910-1
Preparation of an electronic
General procedures
components management plan
06/30112041 DC
will supersede DD IEC/TS 62239:2003 GEL/107
EN ISO 9241-304 Ergonomics of
GME/15
human-system interaction. Part 304. User performance test
BS ISO 27547:Plastics. Preparation of test
PD CEN/TR 14383:-
specimens of thermoplastic
Prevention of urban planning by
materials using mouldless
urban planning and building design
methods
PH/9
06/30117301 DC
technologies
ISO 16754 Earth-moving
PD CEN/TR 14383-2
machinery. Determination of
Urban planning
BS ISO 27547-1
will supersede DD ENV 14383-2:2003 B/562
General principles, and laser-sintering of specimens
ground contact pressure. Crawler machines
B/513/1
PRI/82 PD ISO/TR 28118
06/30125306 DC
Information and documentation.
BS ISO TS 28479
EN 15609 LPG equipment and
Performance indicators for national
Crop protection equipment.
accessories. LPG propulsion
libraries
Substitute materials for testing
IDT/2/15
AGE/15
systems for boats, yachts and other craft. Installation requirements
PVE/19
PD IEC/TR IEC 61946
BS ISO 28981
Mineral insulating oils.
Mopeds. Methods for setting the
Characterisation of the paraffinic /
running resistance on a chassis
06/30126364 DC
naphthenic nature by low
dynamometer
AUE/14
IEC 80000-14 Quantities and units.
temperature differential scanning
Part 14. Telebiometrics related to
calorimetry. Test method
GEL/10
human physiology
SS/7
DD IEC/TS 60479:Effects of current on human beings
PAS 911
and livestock
06/30128759 DC
Fire strategies for businesses.
BS ISO 15086-3 Hydraulic fluid
Guidance and framework for their
power. Determination of the
formulation
DD IEC/TS 60479-1:2005/Corrigendum General aspects
ZZ/1
fluid-borne noise characteristics of components and systems. Part 3. Measurement of hydraulic
JPEL/64
impedance
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
MCE/18/-/8
Page 35 of 71
06/30133574 DC
06/30141790 DC
06/30146511 DC
BS 5979 Code of practice for
BS ISO 10245-1 Cranes. Limiting
BS ISO 18113-1 Clinical laboratory
remote centres receiving signals
and indicating devices. Part 1.
testing and in vitro diagnostic
from security systems
General
GW/1/11
medical systems. Information
MHE/3
supplied by the manufacturer (labelling). Part 1. Terms,
06/30135901 DC
06/30144982 DC
ISO 14132-5 Optics and photonics.
EN 1301-1 Aluminium and
Vocabulary for telescopic systems.
aluminium alloys. Drawn wire. Part
Part 5. Terms for night vision
1. Technical conditions for
systems
definitions and general requirements
CH/212
06/30146515 DC
inspection and delivery
CPW/172
NFE/35
BS ISO 18113-2 Clinical laboratory testing and in vitro diagnostic
06/30137137 DC
06/30144985 DC
ISO 11992-3 AMD1 Road vehicles.
EN 1301-2 Aluminium and
Interchange of digital information
aluminium alloys. Drawn wire. Part
on electrical connections between
2. Mechanical properties
medical systems. Information supplied by the manufacturer (labelling). Part 2. In vitro diagnostic reagents for
NFE/35
towing and towed vehicles. Part 3.
professional use
CH/212
Application layer for equipment other than brakes and running gear
AUE/16
06/30144988 DC
06/30146518 DC
EN 1301-3 Aluminium and
BS ISO 18113-3 Clinical laboratory
aluminium alloys. Drawn wire. Part
06/30137313 DC
testing and in vitro diagnostic
3. Tolerances on dimensions
NFE/35
ISO/IEC 81060-1 Non-invasive
medical systems. Information supplied by the manufacturer
sphygmomanometers. Part 1.
(labelling). Part 3. In vitro
Requirements and test methods for mechanical type
CH/62/4
06/30145817 DC
diagnostic instruments for
BS ISO 23499 Coal. Determination
professional use
CH/212
of bulk density
PTI/16 06/30138756 DC
06/30146522 DC
ISO 12620 Terminology and other content and language resources. Data categories. Specification of data categories and management of a data category registry for
06/30145835 DC
BS ISO 18113-4 Clinical laboratory
BS ISO 10329 Coal. Determination
testing and in vitro diagnostic
of plastic properties.
medical systems. Information
Constant-torque Giessler
supplied by the manufacturer (labelling). Part 4. In vitro
plastometer method
language resources
PTI/16
TS/1
diagnostic reagents for self-testing
CH/212 06/30146339 DC
06/30139418 DC EN 15602 Security service providers. Terminology
GW/3
ISO 16000-16 Indoor air. Part 16.
06/30146526 DC
Detection and enumeration of
BS ISO 18113-5 Clinical laboratory testing and in vitro diagnostic
moulds. Sampling by filtration
EH/2/3
medical systems. Information supplied by the manufacturer
06/30141785 DC
(labelling). Part 5. In vitro
06/30146347 DC
ISO 4918 Resilient, textile and
diagnostic instruments for
ISO 16000-17 Indoor air. Part 17.
laminate floor coverings. Castor
self-testing
Detection and enumeration of
chair test
PRI/60
CH/212
moulds. Culture-based method
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
EH/2/3
Page 36 of 71
06/30147281 DC
06/30151657 DC
06/30155256 DC
BS 7499 Static site guarding and
BS EN ISO 3452-5 Non-destructive
BS ISO 2597-2 Iron ores.
mobile patrol services. Code of
testing. Penetrant testing. Part 5.
Determination of total iron content.
Penetrant testing at temperatures
Part 2. Titrimetric methods after
practice
GW/3
higher than 50$0DC
titanium (III) chloride reduction
WEE/46
ISE/58
06/30148066 DC BS 8487 Design and construction
06/30151661 DC
06/30157290 DC
of gas boosters used in association
BS EN ISO 3452-6 Non-destructive
BS ISO 28003 Security
with combustion equipment.
testing. Penetrant testing. Part 6.
management systems for the
Penetrant testing at temperatures
supply chain. Requirements for
Specification
GSE/33
lower than 10$0DC
bodies providing audit and
WEE/46
certification of supply chain security management systems
06/30148102 DC
SME/32
ISO/IEC 15420 Information
06/30151815 DC
technology. Automatic identification
BS ISO 898-1 Mechanical
and data capture techniques.
properties of fasteners made of
06/30157587 DC
EAN/UPC bar code symbology
carbon steel and alloy steel. Part 1.
BS ISO 28300 Petroleum,
specification
Bolts, screws and studs
IST/34
petrochemical and natural gas
FME/9/1
industries. Venting of atmospheric and low-pressure storage tanks
PSE/17/-/6 06/30148192 DC
06/30151927 DC
BS EN 61169-4:2007
BS ISO 14744-1 REV Welding.
Radio-frequency connectors. Part
Acceptance inspection of electron
06/30157864 DC
4. R.F. coaxial connectors with
beam welding machines. Part 1.
BS EN 60947-5-1/prA2
inner diameter of outer conductor
Principles and acceptance
Low-voltage switchgear and
16 mm (0.63 in) with screw lock.
conditions
controlgear. Part 5-1. Control
WEE/-/1
Characteristic impedance 50 ohms (Type 7-16)
circuit devices and switching elements. Electromechanical
EPL/46/2
control circuit devices
06/30153386 DC
PEL/17/2
BS ISO 6752 Tools for pressing.
06/30151143 DC
Round punches with 60° conical
BS ISO 10245-3 Cranes. Limiting
head and straight shank
06/30158008 DC
MTE/12
and indicating devices. Part 3. Tower cranes
BS EN 3373-014 Aerospace series. Terminal lugs and in-line
MHE/3/5
splices for crimping on electric
06/30153680 DC
conductors. Part 014. In-line
BS ISO 27107 Animal and
06/30151146 DC
vegetable fats and oils.
BS ISO 11660-3 Cranes. Access,
Determination of peroxide value.
guards and restraints. Part 3.
Potentiometric end-point
Tower cranes
determination
MHE/3
splices, insulated and sealed, for crimping on copper conductors, temperature up to 200°C. Product standard
ACE/6/-/8
AW/307
06/30151267 DC
06/30154066 DC
BS ISO CD 10840 Plastics.
BS ISO/IEC 15457-1 Identification
Guidance for the use of standard
cards. Thin flexible cards. Part 1.
fire tests
Physical characteristics
PRI/26
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30158501 DC BS ISO 11660-1 Cranes. Access, guards and restraints. Part 1. General
IST/17
MHE/3
Page 37 of 71
06/30158613 DC
06/30159143 DC
06/30159347 DC
BS EN 15607 Foodstuffs.
BS EN 15608 Surface active
BS EN 62148-11 Fibre optic active
Determination of d-biotin by HPLC
agents. Quantitative determination
components and devices. Package
of free fatty acid in
and interface standards. Part 11.
alkylamidopropylbetaines.
14-pin pump lasers and
AW/-/3
Gas-chromatographic method
06/30158810 DC
modulator-integrated laser
CII/34
BS EN 1474-2 Installation and
transmitters
GEL/86/3
equipment for liquefied natural gas. Design and testing of marine
06/30159238 DC
transfer systems. Part 2. Design
BS EN 61549/prA2 Miscellaneous
and testing of transfer hoses
06/30159355 DC
lamps
FSH/18/3
BS EN 61753-085-2 Fibre optic
CPL/34/1
interconnecting devices and passive components performance
06/30158813 DC
06/30159274 DC
BS EN 1474-3 Installation and
BS EN 80601-2-30 Medical
equipment for liquefied natural gas.
electrical equipment. Part 2-30.
Design and testing of marine
Particular requirements for basic
transfer systems. Part 3. Offshore
safety and essential performance
transfer systems
standard. Part 085-2. Non-connectorised single-mode pigtailed CWDM devices for category C-controlled environment
GEL/86/2
of automated type non-invasive
FSH/18/3
06/30159359 DC
sphygmomanometers
CH/62/4
BS EN 60255-22-1 Measuring relays and protection equipment.
06/30158897 DC BS EN 15606 Foodstuffs.
06/30159293 DC
Determination of acesulfame-K,
BS EN 15597-1 Winter
aspartame,
maintenance equipment.
neohesperidinedihydrochalcone
Spreading machines (gritting
and saccharin. High performance
machines). Part 1. Requirements
liquid chromatographic method
Part 22-1. Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
PEL/95
on dosage and on static test on
AW/-/3
06/30159382 DC
dosage
B/513
BS ISO 16484-5 Building automation and control systems.
06/30158977 DC BS EN 1124-3 Pipes and fittings of
06/30159311 DC
longitudinally welded stainless
BS EN 61300-3-13 Fibre optic
steel pipes with spigot and socket
interconnecting devices and
for waste water systems. Part 3.
passive components. Basic test
System X. Dimensions
Part 5. Data communication protocol £40.00 members, £80.00 non-members
RHE/2
and measurement procedures.
ISE/8
Part 3-13. Examinations and
06/30159392 DC
measurements. Control stability of
BS EN 1506 Ventilation for
a fibre optic switch
06/30159042 DC
GEL/86/2
BS EN 14349 Chemical
buildings. Sheet metal air ducts and fittings with circular
disinfectants and antiseptics.
cross-section. Dimensions
Quantitative surface test for the
06/30159323 DC
evaluation of bactericidal activity of
BS EN 61300-3-9 Fibre optic
chemical disinfectants and
interconnecting devices and
antiseptics used in veterinary area
passive components. Basic test
on non-porous surfaces without
and measurement procedures.
mechanical action. Test method
Part 3-9. Examinations and
and requirements (phase 2, step 2)
RHE/2
measurements. Crosstalk
CH/216
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
GEL/86/2
Page 38 of 71
06/30159403 DC
06/30159551 DC
06/30159746 DC
BS EN 60450/prA1 Measurement
BS EN ISO 21068-3 Chemical
BS EN 50503 Fluids for
of the average viscometric degree
analysis of silicon carbide
electrotechnical applications.
of polymerization of new and aged
containing raw materials and
Standard for the inventory control,
cellulosic electrically insulating
refractory products. Part 3.
management, decontamination
materials
Determination of nitrogen, oxygen
and/or disposal of electrical
and metallic and oxidic
equipment and insulating liquids
GEL/112
constituents
containing PCBs
RPI/1
GEL/10
06/30159429 DC BS EN 60745-2-19/prA1 Hand-held motor-operated electric tools.
06/30159593 DC
06/30159752 DC
Safety. Part 2-19. Particular
BS ISO/IEC 15457-3 Identification
BS ISO/IEC 19781-1 Information
requirements for jointers
cards. Thin flexible cards. Part 3.
technology. Learning, education
CPL/61/6
Test methods
and training. Registry. Part 1.
IST/17
Registry content
IST/43 06/30159436 DC EN 15303-1 Design and
06/30159628 DC
application of plasterboard systems
BS EN 60268-5/prA1 Sound
06/30159756 DC
system equipment. Part 5.
BS ISO/IEC 19781-2 Information
on frames. Part 1. General
B/544/3
Loudspeakers
technology. Learning, education
EPL/100
and training. Registry. Part 2. Registration authority process
06/30159524 DC
IST/43
BS EN ISO 12625-10 Tissue paper
06/30159668 DC
and tissue products. Part 10.
BS EN 50508 Multi-purpose
Determination of demand water
insulating sticks for electrical
06/30159760 DC
absorption rate and capacity, under
operations on high voltage
BS ISO/IEC 19778-1 Information
controlled hydraulic pressure
installations
PAI/11
technology. Learning, education
PEL/78
and training. Collaborative workplace. Part 1. Collaborative workplace data model
06/30159543 DC
06/30159671 DC
BS EN ISO 21068-1 Chemical
BS EN 13363-1/prA1 Solar
analysis of silicon carbide
protection devices combined with
containing raw materials and
glazing. Calculation of solar and
06/30159763 DC
refractory products. Part 1.
light transmittance. Part 1.
BS ISO/IEC 19778-2 Information
General information and sample
Simplified method
IST/43
technology. Learning, education
B/540
preparation
RPI/1
and training. Collaborative workplace. Part 2. Collaborative environment data model
06/30159694 DC 06/30159547 DC
BS ISO 23601 Safety identification.
BS EN ISO 21068-2 Chemical
Escape plan signs
IST/43
PH/8/1
analysis of silicon carbide
06/30159766 DC
containing raw materials and
BS ISO/IEC 19778-3 Information
refractory products. Part 2.
technology. Learning, education
Determination of loss on ignition,
and training. Collaborative
total carbon, free carbon and
technology. Collaborative
silicon carbide, total and free silica
workplace. Part 3. Collaborative
and total and free silicon
group data model
RPI/1
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
IST/43
Page 39 of 71
06/30159770 DC
06/30160017 DC
06/30160085 DC
BS ISO 2575 AMD5 Road
BS ISO 1496-1:1990/DAM 6 Series
BS ISO 15970 Natural gas.
vehicles. Symbols for controls,
1. Freight containers. Specification
Measurement of properties.
and testing. Part 1. General cargo
Volumetric properties. density,
containers for general purposes.
pressure, temperature and
Amendment 6. Racking test for 45
compression factor
indicators and tell-tales
AUE/12
PTI/15
ft containers
06/30159843 DC
TW/1
BS ISO 13680 Petroleum and
06/30160122 DC
natural gas industries. Corrosion. resistant alloy seamless tubes for
06/30160027 DC
ISO/DIS 26603 Plastics. Aromatic
use as casing, tubing and coupling
BS EN 62055-52 Electricity
isocyanates for use in the
stock. Technical delivery
metering. payment systems. Part
production of polyurethanes.
conditions
52. Standard transfer specification
Determination of total chlorine
PSE/17/-/5
PRI/72/4
(STS). Physical layer protocol for a two-way virtual token carrier for direct local connection
06/30159940 DC
PEL/13
BS EN 60034-15 Rotating
06/30160162 DC BS EN 3155-074 Aerospace
electrical machines. Part 15.
series. Electrical contacts used in
Impulse voltage withstand levels of
06/30160031 DC
elements of connection. Part 074.
rotating A.C. machines with
BS ISO 17564 Hydrogenated nitrile
Contacts, electrical, quadrax, size
rubber (HNBR). Determination of
08, male, type E, crimp, class R.
residual unsaturation by iodine
Product standard
form-wound stator coils
PEL/2
ACE/6/-/3
value
PRI/23 06/30159993 DC 06/30160165 DC
BS EN 61373 Railway applications. Rolling stock equipment. Shock
06/30160034 DC
BS EN 3155-075 Aerospace
and vibration tests
BS ISO 7781 Styrene-butadiene
series. Electrical contacts used in
rubber, raw. Determination of soap
elements of connection. Part 075.
GEL/9/2
and organic-acid content
Contacts, electrical, quadrax, size
PRI/23 06/30160003 DC
08, female, type E, crimp, class R. Product standard
BS ISO 17712 Freight containers.
ACE/6/-/3 06/30160058 DC
Mechanical seals
TW/1
06/30160006 DC
BS EN ISO 8536-4 Infusion equipment for medical use. Part 4.
06/30160259 DC
Infusion sets for single use, gravity
BS ISO 8829-1 Aerospace. Test
feed
BS EN ISO 11644 Leather. Test for
methods for polytetrafluoroethylene
CH/212
adhesion of finish
(PTFE) innnertube hose assemblies. Part 1. Metallic
TCI/69
(stainless steel) braid
06/30160065 DC
ACE/69
BS EN ISO 11143 ED 2 Dental
06/30160010 DC
equipment. Amalgam separators
BS EN ISO 3950 Dentistry.
CH/106/4
Designation system for teeth and
06/30160262 DC BS EN 4642 Aerospace series.
areas of the oral cavity
CH/106/3
Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet. 0.6 mm $3L a $3L 50 mm. 900 MPa $3L Rm $3L 1 050 Mpa
ACE/61/-/15
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
Page 40 of 71
06/30160265 DC
06/30160391 DC
07/30135624 DC
BS ISO 21462 Aerospace. Fluid
BS ISO 5145 AMD 2 Cylinder
BS ISO/IEC 15946-1 Information
systems. Geometrical configuration
valve outlets for gases and gas
technology. Security techniques.
mixtures. Selection and
Cryptographic techniques based
of flareless acorn. Inch series
ACE/69
dimensioning
on elliptic curves. Part 1. General
PVE/3
IST/33
06/30160268 DC BS ISO 21463 Aerospace. Fluid
06/30160408 DC
07/30142135 DC
systems. Geometrical configuration
BS EN 60966-2-4 Radio frequency
BS EN 1012-1 Compressors and
of bosses, fluid connection, internal
and coaxial cable assemblies. Part
vacuum pumps. Safety
2-4. Detail specification for cable
requirements. Part 1. Air
assemblies for radio and TV
compressors
straight threads. Inch series
ACE/69
MCE/8/-/4
receivers. Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
06/30160271 DC
EPL/46 07/30143612 DC
BS ISO 21464 Aerospace. Fluid systems. Geometrical configuration
BS ISO 8586-2 Sensory analysis.
of blunt nose flareless. Inch series
ACE/69
07/30090385 DC
General guidance for the selection,
ISO 13408-1 Aseptic processing of
training and monitoring of
health care products. Part 1.
assessors. Part 2. Expert sensory
General requirements
06/30160338 DC
assessors
CH/198
AW/12
BS EN 50504 Validation of arc welding equipment
WEE/6
06/30160356 DC
07/30117272 DC
07/30145003 DC
BS ISO/IEC 27005 Information
EN 1386 Aluminium and aluminium
technology. Security techniques.
alloys. Tread plate. Specifications
NFE/35
Information security risk
BS EN 60318-4 ED 1
management
Electroacoustics. Simulators of
IST/33 07/30152595 DC
human head and ear. Occluded-ear simulator for the
BS IEC 62024-2 High frequency
measurement of earphones coupled to the ear by insert
EPL/29
07/30125841 DC
inductive components. Electrical
IEC 62097 ED 1.0 Hydraulic
characteristics and measuring
machines. Determination of
methods. Part 2. Rated current of
performance from model
inductors for D.C. to D.C. converter
EPL/51
acceptance tests of radial and axial
06/30160368 DC
flow hydraulic machines with
BS EN 80100 Basic safety and
consideration of scale effects
essential performance
07/30154505 DC
including the effect of surface
requirements of clinical
BS 3882 Specification for top soil
roughness
thermometer for body temperature
AW/20
MCE/15
measurement
CH/121/3 07/30154860 DC
07/30135157 DC
BS 594987 Hot rolled asphalt for
BS ISO/IEC 18014-1 Information
06/30160373 DC
roads and other paved areas.
technology. Security techniques.
BS EN 60601-2-4 ED 3 Medical
Specification for transport, laying
Time-stamping services. Part 1.
electrical equipment. Particular
and compaction and design
Framework
requirements for basic safety and
IST/33
essential performance of cardiac
protocols
B/510/1
defibrillators
CH/62/4
DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
Page 41 of 71
07/30158318 DC
07/30160567 DC
BS EN 1367-1:1999
BS 4N 100-1 AMD 2 Aircraft
BS ISO/IEC 26514 Software and
Determination of resistance to
oxygen systems and equipment.
systems engineering. User
freezing and thawing
documentation requirements for
The text of this draft European
documentation designers and
standard was circulated under the
developers £18.00 members, £36.00 non-members
CEN unique acceptance procedure
Part 1. Design and installation
ACE/38
07/30159086 DC
for approval to publish. Although
IST/15
BS EN 15616 Copper and copper alloys. Determination of cadmium
the formal consultation period on the proposal is now closed, a copy of the text can be made available
content. Flame atomic absorption spectrometry method (FAAS)
RHE/19
07/30160570 DC
on request using document
BS EN 61169-24 Radio-frequency
reference B/502/6.0041/06 from
connectors. Part 24. Sectional
the Programme Manager (below).
Contact: Ray Kerrigan Email:
[email protected]
specification. Radio frequency
07/30159715 DC
coaxial connectors with screw
BS EN 62317-13 Ferrite cores.
coupling, typically for use in 75
Dimensions. Part 13. PQ-cores for
ohm cable distribution systems
use in power supply applications
EPL/51
B/502/6
BS EN ISO 22610
(type F)
EPL/46/2
Surgical drapes, gowns and clear air suits, used as medical devices,
07/30160401 DC
07/30160645 DC
BS EN ISO 9994/prA1 Lighters.
BS EN ISO 15378 Primary
Safety specification
packaging materials for medicinal
CW/32
for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration
products. Particular requirements
Please note that copies of this text
for the application of ISO
are available from the Programme
9001:2000, with reference to good
07/30160560 DC
Manager (below).
manufacturing practice (GMP)
PD 5500 AMD 2 Specification for
CH/212
unfired fusion welded pressure vessels
PVE/1
Contact: Philippa Younas Email:
[email protected] CH/62/1
07/30160659 DC BS EN 62024-1 High frequency
07/30160561 DC BS ISO/IEC 12207 Systems and software engineering. Software life
inductive components. Electrical
BS EN 61223:-
characteristics and measuring
Evaluation and routine testing in
methods. Part 1. Nanohenry range
medical imaging departments
chip inductor
cycle processes £18.00 members, £36.00 non-members
EPL/51 BS EN 61223-3-6 Acceptance tests. Image display
IST/15
devices
DOCUMENTS NOT ISSUED AS DPCs
Copies of the text to this standard,
BS ISO/IEC 15288 Systems and
BS EN 1367:-
CENELEC members as a draft for
software engineering. System life
Tests for thermal and weathering
enquiry by CENELEC/TC 62, are
cycle processes
properties of aggregates
available from the Programme
07/30160564 DC
IST/15
which has been circulated to
Manager (below).
Contact: Philippa Younas Email:
[email protected] CH/62/2
DOCUMENTS NOT ISSUED AS DPCs
Page 42 of 71
IEC 61076:-
ISO/IEC 14496-4:2004/FPDAM 16
Connectors for electronic
Conformance testing. Amendment
equipment. Product requirements
16: MPEG-J GFX conformance
IEC 61076-3-117 Rectangular connectors. Protective housings for use with 8-way
CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE
Copies of the text to this standard,
EN 13454:-
which has been circulated to ISO
Binders, composite binders and
members as a final committee draft
factory made mixtures for floor
by ISO/IEC JTC 1/SC 29, are
screeds based on calcium sulfate
available from the Programme
shielded and unshielded
Manager (below) to whom
connectors for frequencies up to
EN 13454-2:2003/prA1
comments should be submitted by
1000 MHz for industrial
Test methods
19 April, 2007.
environments incorporating the
This draft European amendment
Contact: Jean Stride Email:
[email protected]
60603-7. Variant 14 related to IEC
makes a modification to clause
IST/37
61076-3-106. Push pull coupling
4.4.2.1. Please direct any comment on this proposed change by e-mail
This document has been issued at CD stage to adopt IEC PAS
to the Programme Manager
ISO/IEC FCD 21000:-
61076-3-117:2006 as an
(below) before 31 March, 2007.
Information technology. Multimedia
international standard. Copies are
Contact: Bernard Williams Email:
[email protected]
framework (MPEG-21)
available on request from the
B/544/1
contact point (below).
Contact: Committee Service Centre Email:
[email protected]
ISO/IEC FCD 21000-14
EPL/48
Conformance testing
prEN 1436
Copies of the text to this standard,
Road marking materials. Road
which has been circulated to ISO
ISO/DIS 11699:-
members as a final committee draft
Non-destructive testing. Industrial
by ISO/IEC JTC 1/SC 29, are
radiographic film
available from the Programme
marking performance for road users This work failed the CEN formal vote and this updated draft has
Manager (below) to whom
ISO/DIS 11699-1 Classification of film systems for industrial radiography
now been issued, for which only
comments should be submitted by
editorial comments will be
5 March, 2007.
considered. Any such comments
Contact: Jean Stride Email:
[email protected]
should be submitted using the CEN
IST/37
Copies of this document, which is
the Programme Manager (below)
identical to EN 584-1:2006, are available from the Programme Manager (below).
Contact: Anne Hannan Email:
[email protected] WEE/-/1
comment template and e-mailed to before 1 March, 2007.
ISO/IEC FCD 23001:-
Contact: Bernard Williams Email:
[email protected]
Information technology. MPEG systems technologies
B/509/2
ISO/IEC FCD 23001-2 ISO/IEC 14496:-
Fragment request units
Coding of audio-visual objects
Copies of the text to this standard,
CEN EUROPEAN STANDARDS
which has been circulated to ISO
EN 3:-
members as a final committee draft
Portable fire extinguishers
by ISO/IEC JTC 1/SC 29, are available from the Programme Manager (below) to whom
EN 3-9:2006
comments should be submitted by
Additional requirements to EN 3-7
21 March, 2007.
for pressure resistance of CO$d2
Contact: Jean Stride Email:
[email protected]
extinguishers
IST/37
CEN EUROPEAN STANDARDS
FSH/2
Page 43 of 71
EN 30:-
EN 455-3:2006
EN 474-10:2006
Domestic cooking appliances
Requirements and testing for
Requirements for trenchers
burning gas fuel
biological evaluation
B/513/1 CH/205/3 EN 474-11:2006
EN 30-1:Safety
EN 474:-
Requirements for earth and landfill
Earth-moving machinery. Safety
compactors
B/513/1 EN 30-1-3:EN 474-1:2006
Appliances having a glass ceramic
EN 474-12:2006
General requirements
hotplate CORRIGENDUM 1:September 2004
B/513/1
Requirements for cable excavators
B/513/1
GSE/35 EN 474-2:2006 EN 565:2006
Requirements for tractor-dozers
EN 30-1-4:-
B/513/1
Appliances having one or more
Mountaineering. Tape. Safety requirements and test methods
burners with an automatic burner
SW/136/5
control system AMENDMENT 1:November 2006
EN 474-3:2006
GSE/35
Requirements for loaders
B/513/1
EN 566:2006 Mountaineering. Slings. Safety
EN 81:-
requirements and test methods
EN 474-4:2006
Safety rules for the construction
SW/136/5
Requirements for backhoe loaders
and installation of lifts. Particular
B/513/1
applications to passenger lifts and
EN 843:-
goods passenger lifts
Advanced technical ceramics.
EN 474-5:2006
Monolithic ceramics. Mechanical
Requirements for hydraulic
EN 81-71:-
properties at room temperature
excavators
Vandal resistant lifts
B/513/1
AMENDMENT 1:December 2006
EN 843-1:2006
MHE/4
Determination of flexural strength
EN 474-6:2006
RPI/13
Requirements for dumpers
EN 339:2006
B/513/1
Aerospace series. Aluminium alloy
EN 843-2:2006
AL-P7010-T76. Die forgings. a $3L 200mm
ACE/61/-/24
Determination of Young's modulus,
EN 474-7:2006
shear modulus and Poisson's ratio
Requirements for scrapers
RPI/13
B/513/1 EN 420:Protective gloves. General
EN 474-8:2006
requirements and test methods CORRIGENDUM:November 2006
Requirements for graders
EN 843-3:2005 Determination of subcritical crack
B/513/1
PH/3/8
growth parameters from constant stressing rate flexural strength tests
EN 455:Medical gloves for single use
CEN EUROPEAN STANDARDS
RPI/13
EN 474-9:2006 Requirements for pipelayers
B/513/1
Page 44 of 71
EN 843-4:2005
EN 1015-2:-
EN 1093-3:2006
Vickers, Knoop and Rockwell
Bulk sampling of mortars and
Bench test method for the
superficial hardness
preparation of test mortars AMENDMENT 1:December 2006
measurement of the emission rate
RPI/13
B/519/2
of a specified pollutant
MCE/3
EN 843-5:2006 Statistical analysis
RPI/13
EN 1015-3:-
EN 1634:-
Determination of consistence of
Fire resistance and smoke control
fresh mortar (by flow table) AMENDMENT 2:December 2006
tests for door and shutter
B/519/2
EN 927:Paints and varnishes. Coating materials and coating systems for
EN 1015-6:-
exterior wood
Fire resistance test for doors and
fresh mortar AMENDMENT 1:December 2006
shutter assemblies and openable
B/519/2
Natural weathering test
and elements of building hardware
EN 1634-1:-
Determination of bulk density of
EN 927-3:2006
assemblies, openable windows
STI/28
windows CORRIGENDUM:November 2006
FSH/22 EN 1015-9:-
EN 927-5:2006
Determination of workable life and
Assessment of the liquid water
correction time of fresh mortar AMENDMENT 1:December 2006
permeability
EN 2947:2006 Aerospace series. Steel
B/519/2
STI/28
melted. Non heat treated. Cold drawn wire. A or D $3L 2,3 mm
EN 1015-10:-
EN 958:2006
FE-PA3004 (X10CrNi18-09). Air
ACE/61/-/15
Determination of dry bulk density of
Mountaineering. Energy absorbing
hardened mortar AMENDMENT 1:December 2006
systems for use in kletter-steig (via ferrata) climbing. Safety
EN 3114:-
B/519/2
requirements and test methods
Aerospace series. Microstructure of (alpha + beta) titanium alloy
SW/136/5
products
EN 1015-11:Determination of flexural and
EN 997:WC pans with integral trap
AMENDMENT 1:December 2006
B/503
compressive strength of hardened
EN 3114-001:2006
mortar AMENDMENT 1:December 2006
General requirements
ACE/61/-/49
B/519/2 EN 3114-003:2006
EN 1015:-
EN 1093:-
Methods of test for mortar for
Microstructure of plate
Safety of machinery. Evaluation of
masonry
ACE/61/-/49
the emission of airborne hazardous substances
EN 3114-004:2006
EN 1015-1:-
Microstructure of sheet for
Determination of particle size
EN 1093-2:2006
distribution (by sieve analysis) AMENDMENT 1:December 2006
Tracer method for assessing the
B/519/2
superplastic forming
ACE/61/-/49
emission rate of a specified pollutant
MCE/3
EN 3155:Aerospace series. Electrical contacts used in elements of connection
CEN EUROPEAN STANDARDS
Page 45 of 71
EN 3155-005:2006
EN 3716:-
EN 3976:2006
Contacts, electrical, female, type A,
Aerospace series. Connector,
Aerospace series. Titanium and
crimp, class T. Product standard
single-way with triaxial interface,
titanium alloys. Test method.
for transmission of digital data
Chemical analysis for the
ACE/6/-/3
determination of hydrogen content
ACE/61/-/49 EN 3155-005:-
EN 3716-006:2006
Contacts, electrical, female, type A,
Crimp plug. Product standard
ACE/6/-/3
crimp, class T. Product standard CORRIGENDUM 1:December 2006
Aerospace series. Aluminium alloy
ACE/6/-/3
AL-P2220-T88. Sheet and strip.
EN 3816:2006
0,5 mm $3L a $3L 6 mm
Aerospace series. Steel
EN 3375:-
EN 4003:2006
ACE/61/-/24
FE-PA3601 (X6CrNiT118-10). Air
Aerospace series. Cable, electrical,
melted. Softened and cold rolled.
for digital data transmission
EN 4008:-
Sheet and strip. a $3L 3 mm. Rm
Aerospace series. Elements of
$3M 800 MPa
ACE/61/-/15
EN 3375-006:2006
electrical and optical connection. Crimping tool and associated
Single braid. 78 Ohms. Type XM. Product standard
ACE/6/-/2
EN 3375-007:2006 Double braid. 77 Ohms. Type WW.
accessories
EN 3969:2006 Aerospace series. Steel FE-PL1507 (40CrMoV12). Air
EN 4008-017:2006
melted. Annealed. Forging stock. a
Head for crimping tool
or D $3L 350 mm
M22520/4-01. Product standard
ACE/61/-/15
Product standard
ACE/6/-/3
ACE/6/-/2
EN 3491:2006 Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air
EN 3971:2006
EN 4049:-
Aerospace series. Steel FE-P1507
Aerospace series. Thermocouple
(40CrMoV12). Consumable
extension cable. Operating
electrode remelted. Annealed.
temperatures between -65$0DC
Forging stock. a or D $3L 350 mm
melted. Hardened and tempered.
and +260$0DC
ACE/61/-/15
Forgings. De $3L 100 mm. 900 MPa $3L Rm $3L 1 100 MPa
ACE/61/-/15
EN 4049-001:2006 EN 3972:2006
Technical specification
ACE/6/-/2
Aerospace series. Steel FE-PL1507 (40CrMoV12).
EN 3507:2006
Consumable electrode remelted.
Aerospace series. Steel
EN 4049-003:2006
Hardened and tempered. Bar for
FE-PL1501 (30CrMo12). Air
Single core nickel chromium /
machining. De $3L 50 mm. 1 250
melted. Hardened and tempered.
nickel-aluminium. Product standard
MPa $3L Rm $3L 1 400 MPa
Forgings. De $3L 100 mm. 930
ACE/6/-/2
ACE/61/-/15
MPa $3L Rm $3L 1080 MPa
ACE/61/-/15 EN 4049-004:2006
EN 3973:2006
aluminium shielded and jacketed.
FE-CM3801 (X5CrNiCuNb16-4).
Aerospace series. Heat resisting
Homogenised, solution treated and
alloy NI-PH2301
precipitation hardened. Investment
(NiCr21Fe18Mo9). Non heat
Product standard
ACE/6/-/2
casting. De $3L 50 mm. Rm $3M 1
treated. Forging stock. a or D $3L
030 Mpa
250mm
ACE/61/-/48 CEN EUROPEAN STANDARDS
Two core nickel chromium / nickel
Aerospace series. Steel
EN 3668:2006
ACE/61/-/15 Page 46 of 71
EN 4057:-
EN 4057-406:2006
EN 4359:2006
Cable ties for harnesses. Test
Cable ties for harnesses, test
Aerospace series. Six lobe recess.
methods
methods. Locking barb retention
Drivers. Technical specification
ACE/6/-/8
ACE/12
EN 4057-100:2006 Cable ties for harnesses, test
EN 4108:2006
EN 4382:2006
methods. General
Aerospace series. Wrenches, crow
Aerospace series. Heat resisting
foot attachment socket, socket
alloy NI-PH3601 (NiCr22Mo9Nb).
ACE/6/-/8
drive
Solution treated. Seamless tube.
ACE/12 EN 4057-302:2006
For hydraulic application. D $3L 50 mm, a $3L 3 mm
Cable ties for harnesses, test
ACE/61/-/48 EN 4109:2006
methods. Flammability
ACE/6/-/8
Aerospace series. Wrenches,
EN 4383:2006
socket, face spanner
ACE/12 EN 4057-304:2006
Aerospace series. Heat resisting alloy NI-CH2601
Cable ties for harnesses, test methods. Loop tensile strength at
EN 4110:2006
maximum working temperature
Aerospace series. Wrenches, open
ACE/6/-/8
(NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock
ACE/61/-/48
end, box
ACE/12 EN 4496:EN 4057-306:2006 Cable ties for harnesses, test
EN 4158:2006
methods. Heat ageing test
Aerospace series. Paints and
ACE/6/-/8
Aerospace series. Screws, 100$0Dcountersunk normal head, offset cruciform recess, close
varnishes. Test method for
tolerance normal shank, short
measurement of electrical surface
thread, in titanium alloy, anodized,
resistance of conductive layers
EN 4057-307:2006
ACE/65/-/4
with aluminium pigmented coating. Classification: 1 100MPa (at
Resistance to ultra violet radiation
ambient temperature) / 315$0DC CORRIGENDUM:November 2006
ACE/6/-/8 EN 4354:2006
ACE/12
Aerospace series. Six lobe recess.
EN 4057-401:2006
Drivers, relieved
Cable ties for harnesses, test
ACE/12
methods. Loop tensile strength
EN 4530:Aerospace series. Sealing sleeves
ACE/6/-/8
used in elements of connection
EN 4356:2006 Aerospace series. Six lobe recess.
EN 4057-402:2006
Drivers, short
Cable ties for harnesses, test
ACE/12
EN 4530-005:2006 Sealing sleeves. For external
methods. Life cycle
diameter cable 3 mm to 4,1 mm.
ACE/6/-/8 EN 4357:2006
Product standard
ACE/6/-/3
Aerospace series. Six lobe recess.
EN 4057-404:2006
Drivers, handle
Cable ties for harnesses, test
ACE/12
methods. Low temperature
EN 4530-006:2006 Sealing sleeves. For external
installation
ACE/6/-/8
EN 4358:2006
diameter cable 4.68 mm to 5.05
Aerospace series. Six lobe recess.
mm. Product standard
ACE/6/-/3
Drivers, double ended, 90$0D
ACE/12
CEN EUROPEAN STANDARDS
Page 47 of 71
EN 10021:2006
EN 13501:-
EN 13964:-
General technical delivery
Fire classification of construction
Suspended ceilings. Requirements
requirements for steel products
products and building elements
and test methods AMENDMENT 1:November 2006
ISE/5
B/548 EN 13501-5:EN 12271:2006
Classification using data from
Surface dressing
B/510/2
EN 13967:-
external fire exposure to roofs tests CORRIGENDUM:November 2006
Flexible sheets for waterproofing.
FSH/22/8
Plastic and rubber damp proof sheets including plastic and rubber
EN 12674:Transport packaging. Roll
EN 13707:-
containers
Flexible sheets for waterproofing.
basement tanking sheet. Definitions and characteristics AMENDMENT 1:November 2006
B/546/2
Reinforced bitumen sheets for roof waterproofing. Definitions and
EN 12674-4:2006
characteristics AMENDMENT 1:November 2006
Performance requirements
PKW/0
EN 13969:-
B/546/1
Flexible sheets for waterproofing. Bitumen damp proof sheets
EN 12923:-
EN 13758:-
Advanced technical ceramics.
Textiles. Solar UV protective
Monolithic ceramics
properties
including bitumen basement tanking sheets. Definitions and characteristics AMENDMENT 1:November 2006
B/546/5 EN 12923-1:2006
EN 13758-1:-
General practice for undertaking
Method of test for apparel fabrics
corrosion tests
AMENDMENT 1:December 2006
EN 13970:-
TCI/66
RPI/13
Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and
EN 13445:-
EN 13758-2:-
Unfired pressure vessels
Classification and marking of
characteristics AMENDMENT 1:November 2006
B/546/5
apparel AMENDMENT 1:December 2006
TCI/66
EN 13445-6:Requirements for the design and
EN 13984:Flexible sheets for waterproofing.
fabrication of pressure vessels and
Plastic and rubber vapour control
EN 13858:2006
pressure parts constructed from
layers. Definitions and
Corrosion protection of metals.
spheroidal graphite cast iron AMENDMENT 2:December 2006
characteristics AMENDMENT 1:November 2006
Non-electrolytically applied zinc
PVE/1
flake coatings on iron or steel
B/546/2
components
STI/33 EN 13480:-
EN 14132:2003
Metallic industrial piping
Foodstuffs. Determination of
EN 13947:2006
ochratoxin A in barley and roasted
Thermal performance of curtain
EN 13480-3:-
walling. Calculation of thermal
Design and calculation
transmittance
AMENDMENT 2:November 2006
coffee. HPLC method with immunoaffinity column clean-up
B/540
AW/-/3
PVE/10
CEN EUROPEAN STANDARDS
Page 48 of 71
EN 14133:2003
EN 14476:-
EN 15115:2006
Foodstuffs. Determination of
Chemical disinfectants and
Textile floor coverings.
ochratoxin A in wine and beer.
antiseptics. Virucidal quantitative
Determination of sensitivity to
HPLC method with clean-up on a
suspension test for chemical
spilled water
immunoaffinity column
disinfectants and antiseptics used
AW/-/3
PRI/3
in human medicine. Test method and requirements (phase 2, step 1) AMENDMENT 1:October 2006
EN 15161:2006
EN 14133:-
CH/216
Foodstuffs. Determination of
Products used for treatment of water intended for human
ochratoxin A in wine and beer.
consumption. Anthracite
HPLC method with immunoaffinity
EN 14492:-
column clean-up CORRIGENDUM 1:December 2006
Cranes. Power driven winches and
B/504/13
hoists
EN 15168:2006
AW/-/3
Surface active agents.
EN 14492-2:2006 EN 14140:-
Determination of hydroxyl value.
Power driven hoists
p-Toluensulfonyl isocyanate (TSI)
MHE/3/6
LPG equipment and accessories. Transportable refillable welded
method and potentiometric titration with tetrabutylammonium
steel cylinders for LPG. Alternative
hydroxide
EN 14647:-
design and construction AMENDMENT 1:December 2006
CII/34
Calcium aluminate cement.
PVE/19
Composition, specifications and
EN 15219:2006
conformity criteria CORRIGENDUM 1:November 2006
EN 14346:2006
B/516/6
Characterization of waste.
Water equipment inside buildings. Nitrate removal devices. Requirements for performance,
Calculation of dry matter by
safety and testing
EN 14797:2006
determination of dry residue or
B/504
Explosion venting devices
water content
FSH/23
B/508/3
EN 15257:2006 Cathodic protection. Competence
EN 14975:2006
EN 14354:-
levels and certification of cathodic
Loft ladders. Requirements,
Wood-based panels. Wood veneer
protection personnel
marking and testing
floor covering CORRIGENDUM 1:November 2006
GEL/603
B/512 B/541 EN 14995:2006
EN 14411:2006
Plastics. Evaluation of
Ceramic tiles. Definitions,
compostability. Test scheme and
classification, characteristics and
specifications
CEN WORKSHOP AGREEMENTS CWA 15627:2006
PRI/82
marking
Small punch test method for metallic materials
B/539
no current standard is superseded £68.00 members, £136.00 non-members
EN 15091:2006 EN 14438:2006
Sanitary tapware. Electronic
Gas-fired insets for heating more
opening and closing sanitary tapware
than one room
GSE/36
B/504
CEN REPORTS CEN/TR 12101:Smoke and heat control systems
CEN REPORTS
Page 49 of 71
CEN/TR 12101-4:2006
EN 60317:-
Installed SHEVS systems for smoke and heat ventilation
FSH/25
EN 55014-1:2006 (CISPR 14-1:2005) Emission
Specifications for particular types of winding wires
GEL/210/11 EN 60317-0-6:(IEC 60317-0-6:2001/AMD 1:2006)
CEN/TR 15481:2006 EN 55016:-
Welding of reinforcing steel. Tack
General requirements. Glass-fibre
Specification for radio disturbance
weldability. Test methods and
wound resin or varnish
and immunity measuring apparatus
performance requirements
WEE/43
impregnated, bare or enamelled
and methods
round copper wire AMENDMENT 1:December 2006
GEL/55 EN 55016-1-2:(CISPR 16-1-2:2003/AMD 2:2006)
CEN TECHNICAL SPECIFICATIONS
Ancillary equipment. Conducted
EN 60335:-
CEN/TS 13547:2006
disturbances. Update of LISN
Household and similar electrical
Industrial valves. Copper alloy ball
specifications AMENDMENT 2:December 2006
appliances. Safety
valves
GEL/210/12
PSE/7
EN 60335-2-15:(IEC 60335-2-15:2002)
EN 55016-2-3:2006 (CISPR 16-2-3:2006)
CEN/TS 14421:2006 Hose tail and ferrule for crimping
Particular requirements for appliances for heating liquids CORRIGENDUM:December 2006
Methods of measurement of
and swaging
PRI/66
disturbances and immunity.
CPL/61/07
Radiated disturbance measurements
GEL/210/12
CEN/TS 15379:2006
EN 60454:Pressure-sensitive adhesive tapes
Building management. Terminology and scope of services
RHE/16
for electrical purposes
EN 60034:Rotating electrical machines
EN 60454-3-8:(IEC 60454-3-8:2006)
CEN/TS 15440:2006 EN 60034-26:2006 (IEC 60034-26:2006)
Solid recovered fuels. Method for the determination of biomass
Specifications for individual materials. Woven fabric tapes with
Effects of unbalanced voltages on
content
PTI/17
pressure-sensitive adhesive based
the performance of three-phase
on glass, cellulose acetate alone or
cage induction motors
PEL/2
combined with viscose fibre CORRIGENDUM:December 2001
GEL/15/3
CENELEC PUBLICATIONS
EN 60118:-
EN 45020:2006 (ISO/IEC GUIDE 2:2004)
Hearing aids
EN 60464:Varnished used for electrical
Standardization and related activities. General vocabulary
QS/3
insulation
EN 60118-4:2006 (IEC 60118-4:2006) Induction loop systems for hearing
EN 55014:Electromagnetic compatibility. Requirements for household
EN 60464-2/A1:(IEC 60464-2:2001/A1:2006) Methods of test
aid purposes. Magnetic field strength
EPL/29
CORRIGENDUM:December 2001 GEL/15/3/7
appliances, electric tools and similar apparatus
CENELEC PUBLICATIONS
Page 50 of 71
EN 60512:Connectors for electronic
EN 60670-22:2006 (IEC 60670-22:2003 MODIFIED)
EN 61000-4-12:2006 (IEC 61000-4-12:2006)
equipment. Tests and
Particular requirements for
Testing and measurement
measurements
connecting boxes and enclosures
techniques. Ring wave immunity
PEL/23
test
GEL/210/12 EN 60512-9-3:(IEC 60512-9-3:2006)
EN 60745:-
Endurance tests. Test 9c:
Safety of hand-held
Mechanical operation
motor-operated electric tools
EN 61033:2006 (IEC 61033:1991/A1:2006) Test methods for the determination
(engaging/separating) with
of bond strength of impregnating
electrical load CORRIGENDUM:December 2006
EPL/48/2
EN 60745-2-6:(IEC 60745-2-6:2003/AMD 1:2006) Particular requirements for
agents to an enamelled wire substrate
GEL/15/3/7
hammers AMENDMENT 1:May 2006
EN 60512-12:-
CPL/61/6
Soldering tests
EN 61061:Insulating materials. Non-impregnated densified
EN 60929:(IEC 60929:2006)
EN 60512-12-2:2006 (IEC 60512-12-2:2006)
laminated wood for electrical purposes
A.C.-supplied electronic ballasts for
Test 12b: Solderability, wetting,
tubular fluorescent lamps.
soldering iron method
EPL/48/2
Performance requirements CORRIGENDUM:December 2005
CPL/34/3 EN 60512-12-3:(IEC 60512-12-3:2006) Test 12c: Solderability, de-wetting
EN 61061-1:2006 (IEC 61061-1:2006) Definitions, designation and general requirements
GEL/15/3/6
EN 60947:-
CORRIGENDUM 1:December 2006 EPL/48/2
Low-voltage switchgear and controlgear
EN 61076:Connectors for electronic
EN 60512-12-4:(IEC 60512-12-4:2006)
EN 60947-4-2:(IEC 60947-4-2:1999/AMD 2:2006)
Test 12d: Resistance to soldering
Contactors and motor-starters.
heat, solder bath method CORRIGENDUM 1:December 2006
A.C. semiconductor motor
EPL/48/2
equipment. Product requirements
EN 61076-3-106:2006 (IEC 61076-3-106:2006)
controllers and starters AMENDMENT 2:December 2006
Rectangular connectors. Detail
PEL/17/2
specification for protective housings for use with 8-way
EN 60512-12-5:(IEC 60512-12-5:2006)
shielded and unshielded
Test 12e: Resistance to soldering heat, soldering iron method CORRIGENDUM:December 2006
EPL/48/2
EN 60947-5-8:2006 (IEC 60947-5-8:2006)
connectors for industrial
Control circuit devices and
60603-7 series interface
environments incorporating the IEC
switching elements. Three-position
EPL/48
enabling switches
PEL/17/2 EN 61163:-
EN 60670:-
Reliability stress screening
Boxes and enclosures for electrical
EN 61000:-
accessories for household and
Electromagnetic compatibility
similar fixed electrical installations
(EMC)
CENELEC PUBLICATIONS
Page 51 of 71
EN 61163-1:2006 (IEC 61163-1:2006)
EN 61300-2-38:2006 (IEC 61300-2-38:2006)
EN 61755-1:(IEC 61755-1:2005)
Repairable items manufactured in
Sealing for pressurized fibre optic
Optical interfaces for single mode
lots
devices
DS/1
non-dispersion shifted fibres.
GEL/86/2
General and guidance CORRIGENDUM:December 2001
GEL/86/2 EN 61212:-
EN 61326:-
Industrial rigid round laminated
Electrical equipment for
tubes and rods based on
measurement, control and
thermosetting resins for electrical
laboratory use. EMC requirements
EN 61788:Superconductivity
purposes
EN 61212-2:2006 (IEC 61212-2:2006) Methods of test
GEL/15/3/6
EN 61326-2-4:2006 (IEC 61326-2-4:2006)
EN 61788-7:2006 (IEC 61788-7:2006)
Particular requirements. Test
Electronic characteristic
configurations, operational
measurements. Surface resistance
conditions and performance criteria
of superconductors at microwave
for insulation monitoring devices,
frequencies
L/-/90
according to IEC 61557-8 and for
EN 61241:-
equipment for insulation fault
Electrical apparatus for use in the
location according to IEC 61557-9
presence of combustible dust
GEL/65/1
EN 62132:Integrated circuits. Measurement of electromagnetic immunity, 150 kHz
EN 61241-0:2006
to 1 GHz
EN 61338:-
(IEC 61241-0:2004 MODIFIED/CORR:2005)
Waveguide type dielectric resonators
General requirements
EN 62132-1:(IEC 62132-1:2006/CORR 2006) General conditions and definitions
GEL/31/20 EN 61338-1-4:(IEC 61338-1-4:2005)
EN 61241-1:2006 (IEC 61241-1:2004) Protection by enclosures "tD"
CORRIGENDUM:November 2006
EPL/47
General information and test conditions. Measurement method
GEL/31/20
of complex relative permittivity for
EN 62217:(IEC 62217:2005)
dielectric resonator materials at
Polymeric insulators for indoor and
millimetre-wave frequency CORRIGENDUM:November 2006
EN 61300:Fibre optic interconnecting devices
EPL/49
and passive components. Basic test and measurement procedures
outdoor use with a nominal voltage > 1 000 V. General definitions, test methods and acceptance criteria CORRIGENDUM:December 2006
EN 61672:-
PEL/36
Electroacoustics. Sound level
EN 61300-2:-
meters
Tests
EN 62271:-
EN 61300-2-16:2006 (IEC 61300-2-16:2006) Mould growth
controlgear
EPL/29 GEL/86/2 EN 61755:Fibre optic connector optical interfaces
CENELEC PUBLICATIONS
High-voltage switchgear and
EN 61672-3:2006 (IEC 61672-3:2006) Periodic tests
EN 62271-100:(IEC 62271-100:2001/A2:2006) High-voltage alternating-current circuit-breakers AMENDMENT 2:December 2001
PEL/17/1
Page 52 of 71
EN 62271-109:2006 (IEC 62271-109:2006)
EN 175301-801:2006 High density rectangular
EN 301 925: December 2006 (Version 1.2.1)
Alternating- current series
connectors, round removable
Electromagnetic compatibility and
capacitor by-pass switches
PEL/17/1
radio spectrum matters (ERM).
crimp contacts
EPL/48
Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands.
EN 62290:Railway applications. Urban guided transport management and
CENELEC TECHNICAL SPECIFICATIONS
command/control systems
CLC/TS 61111:2006
Technical characteristics and methods of measurement
(IEC 61111:1992/CORR:2000/A1:2002)
EN 302 842:Electromagnetic compatibility and
Matting of insulating material for
EN 62290-1:2006 (IEC 62290-1:2006)
radio spectrum matters (ERM).
electrical purposes
PEL/78
System principles and fundamental
VHF air-ground and air-air digital link (VDL) mode 4 radio
concepts
equipment. Technical
GEL/9 CLC/TS 61112:2006
characteristics and methods of
(IEC 61112:1992/CORR:2000/A1:2002)
EN 62308:2006 (IEC 62308:2006)
measurement for aeronautical mobile (airborne) equipment
Blankets of insulating material for electrical purposes
Reliability assessment and
PEL/78
durability analysis
DS/1
ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) EUROPEAN PUBLICATIONS
EN 62329:Heat shrinkable moulded shapes
EN 62329-1:(IEC 62329-1:2005)
EN 300 162:-
Definitions and general
radio spectrum matters (ERM).
requirements CORRIGENDUM 1:December 2006
Radiotelephone transmitters and
Electromagnetic compatibility and
GEL/15/3/5
EN 62343:-
receivers for the maritime mobile service operating in VHF bands
EN 300 162-2: December 2006 (Version 1.2.1)
Dynamic modules
Harmonized EN covering essential
EN 302 842-1: December 2006 (Version 1.2.1) Physical layer
EN 302 842-2: December 2006 (Version 1.2.1) General description and data link layer
EN 302 842-3: December 2006 (Version 1.2.1) Additional broadcast aspects
EN 302 842-4: December 2006 (Version 1.2.1) Point-to-point functions
requirements of article 3.2 of the
EN 62343-1-3:2006 (IEC 62343-1-3:2006)
R&TTE directive
Performance standards. Dynamic gain tilt equaliser with pigtails for
EN 300 162-3: December 2006 (Version 1.2.1)
use in controlled environment (category C)
GEL/86/3
Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE directive
EN 175301:Detail specification
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS EG 202 416: December 2006 (Version 1.1.2) Human factors (HF). User interfaces. Setup procedure design guidelines for mobile terminals and services
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 53 of 71
EG 202 417: December 2006 (Version 1.1.2)
ES 201 915-11: December 2006 (Version 1.6.1)
Human factors (HF). User
Account management SCF (Parlay
education guidelines for mobile
3)
terminals and services
EG 202 549: December 2006 (Version 1.1.1)
ES 201 915-12: December 2006 (Version 1.6.1) Charging SCF (Parlay 3)
Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Design guide. Application of security
ES 202 391:Open service access (OSA).
ES 201 915:-
ES 202 391-1: December 2006 (Version 1.2.1) Common (Parlay X 2)
Open service access (OSA). Application programming interface (API)
ES 201 915-1: December 2006 (Version 1.6.1) Overview (Parlay 3)
ES 201 915-2: December 2006 (Version 1.6.1) Common data definitions (Parlay 3)
ES 201 915-4: December 2006 (Version 1.6.1) Call control SCF (Parlay 3)
ES 201 915-5: December 2006 (Version 1.6.1) User interaction SCF (Parlay 3)
ES 201 915-6: December 2006 (Version 1.5.1) Mobility SCF (Parlay 3)
ES 201 915-8: December 2006 (Version 1.6.1) Data session control SCF (Parlay 3)
ES 202 391-10: December 2006 (Version 1.2.1) Call handling (Parlay X 2)
ES 202 391-11: December 2006 (Version 1.2.1) Audio call (Parlay X 2)
Parlay X web services
countermeasures to service capabilities
ES 202 391-9: December 2006 (Version 1.2.1) Terminal location (Parlay X 2)
ES 202 391-2: December 2006 (Version 1.2.1) Third party call (Parlay X 2)
ES 202 391-12: December 2006 (Version 1.2.1) Multimedia conference (Parlay X 2)
ES 202 391-13: December 2006 (Version 1.2.1) Address list management (Parlay X 2)
ES 202 391-3: December 2006 (Version 1.2.1) Call notification (Parlay X 2)
ES 202 391-14: December 2006 (Version 1.2.1) Presence (Parlay X 2)
ES 202 391-4: December 2006 (Version 1.2.1) Short messaging (Parlay X 2)
ES 202 915:Open service access (OSA). Application programming interface (API)
ES 202 391-5: December 2006 (Version 1.2.1) Multimedia messaging (Parlay X 2)
ES 202 391-6: December 2006 (Version 1.2.1) Payment (Parlay X 2)
ES 202 391-7: December 2006 (Version 1.2.1) Account management (Parlay X 2)
ES 202 391-8: December 2006 (Version 1.2.1) Terminal status (Parlay X 2)
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
ES 202 915-1: December 2006 (Version 1.4.1) Overview (Parlay 4)
ES 202 915-2: December 2006 (Version 1.4.1) Common data definitions (Parlay 4)
ES 202 915-3: December 2006 (Version 1.4.1) Framework (Parlay 4)
ES 202 915-4:Call control
Page 54 of 71
ES 202 915-4-1: December 2006 (Version 1.4.1)
ES 202 915-10: December 2006 (Version 1.4.1)
TR 102 522: December 2006 (Version 1.1.1)
Call control common definitions
Connectivity manager SCF (Parlay
Electromagnetic compatibility and
(Parlay 4)
4)
radio spectrum matters (ERM). Short range devices (SRD).
ES 202 915-4-2: December 2006 (Version 1.4.1) Generic call control SCF (Parlay 4)
ES 202 915-11: December 2006 (Version 1.4.1) Account management SCF (Parlay 4)
ES 202 915-4-3: December 2006 (Version 1.4.1) Multi-party call control SCF (Parlay 4)
Equipment for detecting movement. Radio equipment operating in the frequency range 17,1 GHz to 17,3 GHz. System reference document for ground based synthetic aperture radar
ES 202 915-12: December 2006 (Version 1.4.1) Charging SCF (Parlay 4)
(GBSAR)
TR 102 648:Speech processing, transmission
ES 202 915-4-4: December 2006 (Version 1.4.1) Multi-media call control SCF
ES 202 915-13: December 2006 (Version 1.3.1) Policy management SCF (Parlay 4)
(Parlay 4)
ES 202 915-4-5: December 2006 (Version 1.4.1) Conference call control SCF
and quality aspects (STQ). Test methodologies for ETSI test events and results. Test methodologies for ETSI test events
SR 002 564: December 2006 (Version 1.1.1) ETSI/3GPP deliverables to eHealth
TR 102 648-1: December 2006 (Version 1.1.1) VoIP speech quality testing
TR 102 505: December 2006 (Version 1.1.1)
TR 133 978: December 2006 (Version 6.6.0)
Speech processing, transmission
Universal mobile
and quality aspects (STQ).
telecommunications system
Development of a reference web
(UMTS). Security aspects of early
page
IP multimedia subsystem (IMS)
Applicability of existing ETSI and
(Parlay 4)
ES 202 915-5: December 2006 (Version 1.4.1) User interaction SCF (Parlay 4)
ES 202 915-6: December 2006 (Version 1.4.1) Mobility SCF (Parlay 4)
ES 202 915-7: December 2006 (Version 1.4.1) Terminal capabilities SCF (Parlay 4)
ES 202 915-8: December 2006 (Version 1.4.1)
(3GPP TR 33.978 version 6.6.0
TR 102 513: December 2006 (Version 1.1.1) Terrestrial trunked radio (TETRA).
release 6)
Feasibility study into the
TS 101 456: December 2006 (Version 1.4.2)
implications of operating public
Electronic signatures and
safety sector (PSS) TEDS using
infrastructures (ESI). Policy
the proposed "tuning range"
requirements for certification
concept in the 410 MHz to 430
authorities issuing qualified
MHz and 450 MHz to 470 MHz
certificates
frequency bands
Data session control SCF (Parlay 4)
TS 102 042: December 2006 (Version 1.2.3) Electronic signatures and
ES 202 915-9: December 2006 (Version 1.3.1) Generic messaging SCF (Parlay 4)
infrastructures (ESI). Policy requirements for certification authorities issuing public key certificates
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 55 of 71
TS 102 165:Telecommunications and internet converged services and protocols for advanced networking (TISPAN). Methods and protocols
TS 102 232-3: December 2006 (Version 2.1.1)
TS 102 462: December 2006 (Version 1.1.1) Satellite earth stations and
Service-specific details for internet
systems (SES). Broadband
access services
satellite multimedia (BSM). QoS functional architecture
TS 102 165-1: December 2006 (Version 4.2.1) Method and proforma for threat, risk, vulnerability analysis
TS 102 232-4: December 2006 (Version 2.1.1) Service-specific details for layer 2
TS 102 465: December 2006 (Version 1.1.1)
services
Satellite earth stations and systems (SES). Broadband
TS 102 173: December 2006 (Version 1.3.1) Services for computer supported telecommunications applications
TS 102 232-6: December 2006 (Version 2.1.1) PSTN/ISDN services
TS 102 361:Electromagnetic compatibility and
TS 102 174: December 2006 (Version 1.3.1)
radio spectrum matters (ERM).
applications (CSTA) phase III (ISO/IEC DIS 18056 Modified)
TS 102 472: December 2006 (Version 1.2.1) Digital video broadcasting (DVB). IP datacast over DVB-H: content delivery protocols
Digital mobile radio (DMR) systems
TS 102 551:-
XML protocol for computer supported telecommunications
General security architecture
Service-specific details for
(CSTA) phase III (ISO/IEC 18051:2000 Modified)
satellite multimedia (BSM).
TS 102 361-1: December 2006 (Version 1.4.1) DMR air interface (AI) protocol
Satellite earth stations and systems (SES). Satellite digital radio (SDR) systems. Inner physical layer of the radio interface
TS 102 182: December 2006 (Version 1.2.1) Emergency communications (EMTEL). Requirements for communications from
TS 102 385:Broadband radio access networks (BRAN). HiperMAN. Conformance testing for WiMAX/HiperMAN 1.2.1
authorities/organizations to individuals, groups or the general public during emergencies
TS 102 551-1: December 2006 (Version 1.1.1) Single carrier transmission
TS 102 385-1: December 2006 (Version 2.3.1)
TS 102 551-2: December 2006 (Version 1.1.1) Multiple carrier transmission
Protocol implementation
TS 102 232:Lawful interception (LI). Handover
conformance statement (PICS) proforma
interface and service-specific details (SSD) for IP delivery
TS 102 385-2: December 2006 (Version 2.3.1) Test suite structure and test
TS 102 232-1: December 2006 (Version 2.1.1)
purposes (TSS&TP)
Handover specification for IP delivery
TS 102 385-3: December 2006 (Version 2.3.1) Abstract test suite (ATS)
TS 102 232-2: December 2006 (Version 2.1.1) Service-specific details for E-mail
TS 102 558: December 2006 (Version 1.1.1) Methods for testing and specification (MTS). Internet protocol testing (IPT): IPv6 security. Requirements catalogue
TS 102 559: December 2006 (Version 1.1.1) Methods for testing and specification (MTS). Internet protocol testing (IPT): IPv6 mobility. Requirements catalogue
services
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 56 of 71
TS 122 101: December 2006 (Version 7.8.0)
TS 124 109: December 2006 (Version 6.8.0)
TS 125 143: December 2006 (Version 5.12.0)
Universal mobile
Universal mobile
Universal mobile
telecommunications system
telecommunications system
telecommunications system
(UMTS). Service aspects. Service
(UMTS). Bootstrapping interface
(UMTS). UTRA repeater
principles (3GPP TS 22.101
(Ub) and network application
conformance testing (3GPP TS
version 7.8.0 release 7)
function interface (Ua). Protocol
25.143 version 5.12.0 release 5)
details (3GPP TS 24.109 version
TS 122 234: December 2006 (Version 7.5.0) Universal mobile
6.8.0 release 6)
telecommunications system
TS 124 247: December 2006 (Version 6.7.0)
(UMTS). Requirements on 3GPP
Digital cellular telecommunications
system to wireless local area
system (phase 2+). Universal
network (WLAN) interworking
mobile telecommunications system
(3GPP TS 22.234 version 7.5.0
(UMTS). Messaging using the IP
release 7)
multimedia (IM) core network (CN) subsystem. Stage 3 (3GPP TS
TS 123 060: December 2006 (Version 3.17.0) Digital cellular telecommunications
TS 125 143: December 2006 (Version 6.6.0) (3GPP TS 25.143 version 6.6.0 release 6)
TS 125 143: December 2006 (Version 7.2.0) (3GPP TS 25.143 version 7.2.0 release 7)
24.247 version 6.7.0 release 6)
system (phase 2+). Universal
TS 125 106: December 2006 (Version 5.12.0)
mobile telecommunications system
Universal mobile
(UMTS). General packet radio
telecommunications system
service (GPRS). Service
(UMTS). UTRA repeater radio
description. Stage 2 (3GPP TS
transmission and reception (3GPP
23.060 version 3.17.0 release
TS 25.106 version 5.12.0 release
1999)
5)
TS 123 060: December 2006 (Version 4.11.0)
TS 125 106: December 2006 (Version 6.6.0)
(3GPP TS 23.060 version 4.11.0
(3GPP TS 25.106 version 6.6.0
release 4)
release 6)
TS 123 060: December 2006 (Version 5.13.0)
TS 125 106: December 2006 (Version 7.2.0)
(3GPP TS 23.060 version 5.13.0
(3GPP TS 25.106 version 7.2.0
release 5)
release 7)
TS 123 060: December 2006 (Version 6.15.0)
TS 125 113: December 2006 (Version 7.5.0)
(3GPP TS 23.060 version 6.15.0
Universal mobile
release 6)
telecommunications system (UMTS). Base station and repeater
TS 125 214: December 2006 (Version 6.11.0) Universal mobile telecommunications system (UMTS). Physical layer procedures (FDD) (3GPP TS 25.214 version 6.11.0 release 6)
TS 125 214: December 2006 (Version 7.3.0) (3GPP TS 25.214 version 7.3.0 release 7)
TS 125 401: December 2006 (Version 6.9.0) Universal mobile telecommunications system (UMTS). UTRAN overall description (3GPP TS 25.401 version 6.9.0 release 6)
TS 125 401: December 2006 (Version 7.2.0) (3GPP TS 25.401 version 7.2.0 release 7)
electromagnetic compatibility (EMC) (3GPP TS 25.113 version 7.5.0 release 7)
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 57 of 71
TS 125 430: December 2006 (Version 7.2.0)
TS 125 462: December 2006 (Version 6.4.0)
TS 131 122: December 2006 (Version 6.3.0)
Universal mobile
Universal mobile
Universal mobile
telecommunications system
telecommunications system
telecommunications system
(UMTS). UTRAN Iub Interface:
(UMTS). UTRAN Iuant interface:
(UMTS). Universal subscriber
general aspects and principles
signalling transport (3GPP TS
identity module (USIM)
(3GPP TS 25.430 version 7.2.0
25.462 version 6.4.0 release 6)
conformance test specification
release 7)
TS 125 434: December 2006 (Version 7.1.0)
(3GPP TS 31.122 version 6.3.0
TS 125 463: December 2006 (Version 7.4.0) Universal mobile
release 6)
Universal mobile
telecommunications system
TS 131 124: November 2006 (Version 6.7.0)
telecommunications system
(UMTS). UTRAN Iuant interface:
Universal mobile
(UMTS). UTRAN Iub interface data
remote electrical tilting (RET)
telecommunications system
transport and transport signalling
antennas application part (RETAP)
(UMTS). Mobile equipment (ME)
for common transport channel data
signalling (3GPP TS 25.463
conformance test specification.
streams (3GPP TS 25.434 version
version 7.4.0 release 7)
Universal subscriber interface
7.1.0 release 7)
TS 125 435: December 2006 (Version 7.3.0)
module application toolkit (USAT)
TS 131 102: December 2006 (Version 6.16.0) Universal mobile
conformance test specification (3GPP TS 31.124 version 6.7.0 release 6)
Universal mobile
telecommunications system
telecommunications system
(UMTS). Characteristics of the
(UMTS). UTRAN Iub interface user
universal subscriber identity
TS 133 102: December 2006 (Version 7.1.0)
plane protocols for common
module (USIM) application (3GPP
Universal mobile
transport channel data streams
TS 31.102 version 6.16.0 release
telecommunications system
(3GPP TS 25.435 version 7.3.0
6)
(UMTS). 3G security. Security
release 7)
TS 125 450: December 2006 (Version 7.1.0) Universal mobile
architecture (3GPP TS 33.102
TS 131 102: December 2006 (Version 7.7.0) (3GPP TS 31.102 version 7.7.0 release 7)
telecommunications system (UMTS). UTRAN Iupc interface general aspects and principles (3GPP TS 25.450 version 7.1.0 release 7)
version 7.1.0 release 7)
TS 133 203: December 2006 (Version 7.4.0) Digital cellular telecommunications
TS 131 121: November 2006 (Version 6.6.0) Universal mobile telecommunications system (UMTS). UICC-terminal interface.
TS 125 461: December 2006 (Version 7.3.0)
Universal subscriber identity
Universal mobile
specification (3GPP TS 31.121
telecommunications system
version 6.6.0 release 6)
system (phase 2+). Universal mobile telecommunications system (UMTS). 3G security. Access security for IP-based services (3GPP TS 33.203 version 7.4.0 release 7)
module (USIM) application test
TS 133 210: December 2006 (Version 7.2.0)
(UMTS). UTRAN Iuant interface:
Digital cellular telecommunications
layer 1 (3GPP TS 25.461 version
system (phase 2+). Universal
7.3.0 release 7)
mobile telecommunications system (UMTS). 3G security. Network domain security (NDS). IP network layer security (3GPP TS 33.210 version 7.2.0 release 7)
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 58 of 71
TS 133 220: December 2006 (Version 6.11.0)
TS 134 229-2: December 2006 (Version 6.0.0)
TS 144 018: December 2006 (Version 6.20.0)
Digital cellular telecommunications
(3GPP TS 34.229-2 version 6.0.0
Digital cellular telecommunications
system (phase 2+). Universal
release 6)
system (phase 2+). Mobile radio
mobile telecommunications system (UMTS). Generic authentication architecture (GAA). Generic bootstrapping architecture (3GPP TS 33.220 version 6.11.0 release 6)
TS 133 220: December 2006 (Version 7.6.0)
interface layer 3 specification.
TS 141 101: December 2006 (Version 6.7.0) Digital cellular telecommunications specifications and technical reports
TS 148 018: December 2006 (Version 5.14.0)
(3GPP TS 41.101 version 6.7.0
Digital cellular telecommunications
release 6)
system (phase 2+). General packet radio service (GPRS). Base station
TS 143 020: December 2006 (Version 4.3.0) Digital cellular telecommunications
Universal mobile
Security-related network functions
telecommunications system
(3GPP TS 43.020 version 4.3.0
(UMTS). 3G security. Security of
release 4)
system (phase 2+).
multimedia broadcast/multicast version 6.9.0 release 6)
6.20.0 release 6)
for a GERAN-based 3GPP system
TS 133 246: December 2006 (Version 6.9.0)
service (MBMS) (3GPP TS 33.246
protocol (3GPP TS 44.018 version
system (phase 2+). Technical
(3GPP TS 33.220 version 7.6.0 release 7)
Radio resource control (RRC)
system (BSS) - serving GPRS support node (SGSN). BSS GPRS protocol (BSSGP) (3GPP TS 48.018 version 5.14.0 release 5)
TS 148 018: December 2006 (Version 6.16.0) (3GPP TS 48.018 version 6.16.0
TS 143 246: December 2006 (Version 6.10.0)
release 6)
Digital cellular telecommunications
TS 151 010:-
TS 134 229:-
system (phase 2+). Multimedia
Digital cellular telecommunications
Universal mobile
broadcast/multicast service
system (phase 2+). Mobile station
telecommunications system
(MBMS) in the GERAN. Stage 2
(MS) conformance specification
(UMTS). Internet protocol (IP)
(3GPP TS 43.246 version 6.10.0
multimedia call control protocol
release 6)
TS 151 010-2: December 2006 (Version 7.4.0)
based on session initiation protocol (SIP) and session description protocol (SDP)
TS 134 229-1: December 2006 (Version 5.2.0)
TS 143 318: December 2006 (Version 6.8.0)
Protocol implementation
Digital cellular telecommunications
proforma specification (3GPP TS
system (phase 2+). Generic
51.010-2 version 7.4.0 release 7)
access to the A/Gb interface.
Protocol conformance specification
Stage 2 (3GPP TS 43.318 version
(3GPP TS 34.229-1 version 5.2.0
6.8.0 release 6)
release 5)
TS 134 229-2: December 2006 (Version 5.2.0)
conformance statement (PICS)
TS 151 010-4: November 2006 (Version 4.3.0) Subscriber identity module (SIM)
TS 144 006: December 2006 (Version 6.5.0)
application toolkit conformance test
Digital cellular telecommunications
version 4.3.0 release 4)
Implementation conformance
system (phase 2+). Mobile station -
statement (ICS) specification
base stations system (MS - BSS)
(3GPP TS 34.229-2 version 5.2.0
interface data link (DL) layer
release 5)
specification (3GPP TS 44.006
specification (3GPP TS 51.010-4
version 6.5.0 release 6)
OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
Page 59 of 71
TS 151 010-5: December 2006 (Version 7.4.0)
IEC 60050:-
Inter-radio-access-technology
vocabulary
IEC 60118:-
International electrotechnical
Electroacoustics. Hearing aids
(RAT) (GERAN / UTRAN) interaction abstract test suite (ATS) (3GPP TS 51.010-5 version 7.4.0 release 7)
TS 187 005: December 2006 (Version 1.1.1)
IEC 60050-351:2006 (Edition 3) Control technology
IEC 60118-4:2006 (Edition 2)
£192.00 members, £200.00 non-members
aid purposes. Magnetic field
Induction loop systems for hearing
GEL/65
Telecommunications and internet
strength £116.80 members, £121.67 non-members
EPL/29
converged services and protocols
IEC 60079:-
for advanced networking
Explosive atmospheres
(TISPAN). NGN lawful interception.
IEC 60155:Glow-starters for fluorescent lamps
Lawful interception functional
IEC 60079-19:2006 (Edition 2)
entities, information flow and reference points
AMENDMENT 2:November 2006 £17.60 members, £18.33 non-members
Equipment repair, overhaul and
CPL/34/1
reclamation £131.20 members, £136.67 non-members
IEC PUBLICATIONS
GEL/31/11
IEC 60027:-
IEC 60269:Low-voltage fuses
Letter symbols to be used in
IEC 60086:-
electrical technology
IEC 60027-4:2006 (Edition 2) Rotating electrical machines £68.80 members, £71.67 non-members
SS/7
Primary batteries
IEC 60269-1:2006 (Edition 4) General requirements
IEC 60086-1:2006 (Edition 10) General
£168.00 members, £175.00 non-members
PEL/32
£116.80 members, £121.67 non-members
CPL/35 IEC 60027-6:2006
IEC 60269-2:2006 (Edition 3) Supplementary requirements for
Control technology
£46.40 members, £48.33 non-members
SS/7
IEC/TS 60034:-
IEC 60086-2:2006 (Edition 11)
fuses for use by authorised
Physical and electrical
application). Examples of
specifications £131.20 members, £136.67 non-members
standardized systems of fuses A to
persons (fuses mainly for industrial
CPL/35
Rotating electrical machines
I £193.60 members, £201.67 non-members
PEL/32 IEC 60095:Lead-acid starter batteries
IEC/TS 60034-27:2006 Off-line partial discharge off-line measurements on the stator
IEC 60095-1:2006 (Edition 7)
winding insulation of rotating electrical machines £131.20 members, £136.67 non-members
General requirements and test
PEL/2
methods £84.80 members, £88.33 non-members
PEL/21
IEC PUBLICATIONS
Page 60 of 71
IEC 60269-3:2006 (Edition 3)
IEC 60317-0-6:-
IEC/TS 60479-1:-
Glass-fibre wound resin or varnish
General aspects
Supplementary requirements for
impregnated, bare or enamelled
CORRIGENDUM 1:October 2006
fuses for use by unskilled persons
round copper wire AMENDMENT 1:October 2006
(fuses mainly for household or
JPEL/64
£17.60 members, £18.33 non-members
similar application). Examples of standardized systems of fuses A to
IEC 60601:-
GEL/55
F £192.00 members, £200.00 non-members
PEL/32
Medical electrical equipment
IEC 60335:-
IEC 60601-1:-
Household and similar electrical
General requirements for basic
appliances. Safety
safety and essential performance CORRIGENDUM 1:December 2006
IEC 60269-4:2006 (Edition 4)
CH/62/1
Supplementary requirements for
IEC 60335-2-35:-
fuse-links for the protection of
Particular requirements for
semiconductor devices £131.20 members, £136.67 non-members
instantaneous water heaters AMENDMENT 1:October 2006
PEL/32
IEC 60601-1-6:2006 (Edition 2) General requirements for basic
£17.60 members, £18.33 non-members
CPL/61/07 IEC 60287:-
safety and essential performance. Collateral standard: usability £155.20 members, £161.67 non-members
IEC 60384:-
Electric cables. Calculation of the
CH/62/1
Fixed capacitors for use in
current rating
electronic equipment
IEC/TR 60728:Cable networks for television
IEC 60287-1-1:2006 (Edition 2)
IEC 60384-3:2006 (Edition 3)
Current rating equations (100 %
signals, sound signals and interactive services
Sectional specification: surface
load factor) and calculation of
mount fixed tantalum electrolytic
losses. General £92.80 members, £96.67 non-members
GEL/20/16
capacitors with manganese dioxide
IEC/TR 60728-6-1:2006
solid electrolyte £84.80 members, £88.33 non-members
System guidelines for analogue
EPL/40X
optical transmission systems £116.80 members, £121.67 non-members
EPL/100
IEC 60317:Specifications for particular types of winding wires
IEC 60384-3-1:2006 (Edition 2)
IEC 60825:-
Blank detail specification: surface
Safety of laser products
IEC 60317-0:-
mount fixed tantalum electrolytic
General requirements
capacitors with manganese dioxide
IEC 60317-0-5:2006 (Edition 2)
solid electrolyte. Assessment level
IEC 60825-2:-
EZ £46.40 members, £48.33 non-members
Safety of optical fibre
EPL/40X
Glass-fibre braided resin or varnish impregnated, bare or enamelled
£35.20 members, £36.67 non-members
EPL/76
rectangular copper wire £68.80 members, £71.67 non-members
IEC/TS 60479:Effects of current on human beings
GEL/55
IEC PUBLICATIONS
communication systems AMENDMENT 1:November 2006
and livestock
Page 61 of 71
IEC/TR 60825-8:2006 (Edition 2)
IEC 60947:Low-voltage switchgear and
IEC 61000-4-20:-
Guidelines for the safe use of laser
controlgear
Emission and immunity testing in
beams on humans £100.80 members, £105.00 non-members
transverse electromagnetic (TEM)
EPL/76
waveguides AMENDMENT 1:November 2006
IEC 60947-4-2:-
£17.60 members, £18.33 non-members
Contactors and motor-starters. A.C. semiconductor motor
GEL/210/12
controllers and starters AMENDMENT 2:November 2006
IEC 60874:Connectors for optical fibres and
£92.80 members, £96.67 non-members
cables
PEL/17/2 IEC 60874-1:2006 (Edition 5) General specification
IEC 60947-5-9:2006
£84.80 members, £88.33 non-members
switching elements. Flow rate
IEC 61025:2006 (Edition 2) Fault tree analysis (FTA) £131.20 members, £136.67 non-members
DS/1
Control circuit devices and
GEL/86/2
switches £92.80 members, £96.67 non-members
IEC 61061:Non-impregnated densified
PEL/17/2
IEC 60874-1-1:2006 (Edition 2) Blank detail specification
laminated wood for electrical purposes
IEC 61000:-
£38.40 members, £40.00 non-members
IEC 61061-1:2006 (Edition 3)
Electromagnetic compatibility
GEL/86/2
(EMC)
IEC 60915:2006 (Edition 2)
IEC/TR 61000-2-14:2006
Fixed capacitors for use in
pubic electricity distribution
electronic equipment. Preferred
networks £116.80 members, £121.67 non-members
Definitions, designation and general requirements £25.60 members, £26.67 non-members
Environment. Overvoltages on
dimensions of shaft ends, bushes and for the mounting of single hole,
GEL/15/3/6
IEC 61161:2006 (Edition 2)
GEL/210/8
bush-mounted, shaft-operated
Ultrasonics. Power measurement. Radiation force balances and
electronic components £51.20 members, £53.33 non-members
performance requirements £116.80 members, £121.67 non-members
IEC 61000-4:-
EPL/40X
Testing and measurement techniques
EPL/87
IEC 60938:IEC 61000-4-1:2006 (Edition 3) Overview of IEC 61000-4 series
Fixed inductors for electromagnetic interference suppression
IEC 61169:Radio-frequency connectors
£51.20 members, £53.33 non-members
IEC 60938-2:-
GEL/210/12
Sectional specification
AMENDMENT 1:October 2006 £41.60 members, £43.33 non-members
IEC 61000-4-18:2006
EPL/40X
Damped oscillatory wave immunity test £100.80 members, £105.00 non-members
GEL/210/12
IEC PUBLICATIONS
Page 62 of 71
IEC 61169-16:2006
IEC 61340:-
Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristics impedance 50
IEC 61300-2-26:2006 (Edition 2) Salt mist
Electrostatics
£35.20 members, £36.67 non-members
IEC 61340-3:-
GEL/86/2
ohms (75 Ohms) (type N) £92.80 members, £96.67 non-members
EPL/46/2
IEC 61300-2-37:2006 (Edition 2)
Human body model (HBM)
closures £32.00 members, £33.33 non-members
Evaluation and routine testing in
GEL/86/2
medical imaging departments
IEC 61300-3:-
IEC 61223-2-6:2006 (Edition 2)
discharge test waveforms £35.20 members, £36.67 non-members
IEC 61300-3-10:2006 (Edition 2) Gauge retention force
tomography X-ray equipment £92.80 members, £96.67 non-members
CH/62/2
GEL/101
£20.80 members, £21.67 non-members
GEL/86/2 IEC/TR 61282:IEC 61300-3-14:2006 (Edition 2)
design guides
IEC/TR 61282-3:2006 (Edition 3) Calculation of link polarization mode dispersion £92.80 members, £96.67 non-members
Accuracy and repeatability of the
IEC 61400-25:-
attenuation settings of a variable
Communications for monitoring
attenuator £38.40 members, £40.00 non-members
and control of wind power plants
GEL/86/2
IEC 61400-25-1:2006 Overall description of principles
GEL/86/3
Dome eccentricity of a convex
Calculating dispersion penalty from
polished ferrule endface £35.20 members, £36.67 non-members
measured time-resolved chirp data £64.00 members, £66.67 non-members
and models £92.80 members, £96.67 non-members
IEC 61300-3-15:2006 (Edition 2)
IEC/TR 61282-8:2006
PEL/88
IEC 61400-25-2:2006
GEL/86/2
Information models
£168.00 members, £175.00 non-members
GEL/86/3
test and measurement procedures
IEC 61400:Wind turbines
Fibre optic communication system
and passive components. Basic
GEL/101
Machine model (MM) electrostatic
performance of computed
Fibre optic interconnecting devices
electrostatic discharge waveforms £38.40 members, £40.00 non-members
IEC 61340-3-2:2006 (Edition 2)
Examinations and measurements
Constancy tests. Imaging
IEC 61300:-
electrostatic effects
IEC 61340-3-1:2006 (Edition 2)
Cable bending for fibre optic
IEC 61223:-
Methods for simulation of
PEL/88
IEC 61300-3-24:2006 (Edition 2) Keying accuracy of optical connectors for polarization
IEC 61400-25-3:2006
maintaining fibre £38.40 members, £40.00 non-members
£92.80 members, £96.67 non-members
Information exchange models
GEL/86/2
PEL/88
IEC 61300-2:Tests IEC PUBLICATIONS
Page 63 of 71
IEC 61400-25-5:2006
IEC/TS 62045:-
Conformance testing
IEC/TR 61804:-
Multimedia security. Guideline for
£116.80 members, £121.67 non-members
Function blocks (FB) for process
privacy protection of equipment
control
and systems in and out of use
IEC/TR 61804-4:2006
IEC/TS 62045-1:2006
EDD interoperability guideline
General
£131.20 members, £136.67 non-members
£51.20 members, £53.33 non-members
PEL/88
IEC 61672:Electroacoustics. Sound level meters
AMT/7
EPL/100
IEC 61672-3:2006 Periodic tests
IEC 61937:-
IEC 62056:-
£56.00 members, £58.33 non-members
Digital audio. Interface for
Electricity metering. Data
non-linear PCM encoded audio
exchange for meter reading, tariff
bitstreams applying IEC 60958
and load control
IEC 61937-8:2006
IEC 62056-46:-
Non-linear PCM bitstreams
Data link layer using HDLC
according to the windows media
protocol AMENDMENT 1:December 2006
EPL/29
IEC 61753:Fibre optic interconnecting devices and passive components performance standard
audio (WMA) professional format £41.60 members, £43.33 non-members
IEC 61753-101-3:2006
£27.20 members, £28.33 non-members
PEL/13
EPL/100
Fibre management systems for category U. Uncontrolled environment £76.80 members, £80.00 non-members
GEL/86/2
IEC/TR 61948:-
IEC 62056-47:2006
Nuclear medicine instrumentation.
COSEM transport layers for IPv4
Routine tests
networks £100.80 members, £105.00 non-members
PEL/13
IEC/TR 61948-4:2006
IEC 61788:-
Radionuclide calibrators
Superconductivity
£20.80 members, £21.67 non-members
CH/62/3 IEC 61788-2:2006 (Edition 2) Critical current measurement. DC
IEC 61987:-
critical current of Nb3Sn composite
Industrial-process measurement
superconductors £100.80 members, £105.00 non-members
and control. Data structures and
L/-/90
IEC 62056-53:2006 (Edition 2) COSEM application layer £192.00 members, £200.00 non-members
PEL/13
elements in process equipment
IEC 62153:-
catalogues
Metallic communication cable test methods
IEC 61987-1:2006
IEC 61788-7:2006 (Edition 2) Electronic characteristic measurements. Surface resistance of superconductors at microwave
Measuring equipment with
IEC 62153-4-8:2006
analogue and digital output £116.80 members, £121.67 non-members
Electromagnetic compatibility (EMC). Capacitive coupling
GEL/65/2
frequencies £92.80 members, £96.67 non-members
admittance £35.20 members, £36.67 non-members
EPL/46 L/-/90
IEC PUBLICATIONS
Page 64 of 71
IEC 62257:-
IEC 62343-1-3:2006
IEC/TR 62461:2006
Recommendation for small
Performance standards. Dynamic
Radiation protection
renewable energy and hybrid
gain tilt equalizer with pigtails for
instrumentation. Determination of
systems for rural electrification
use in controlled environments
uncertainty in measurement £116.80 members, £121.67 non-members
IEC 62257-7-1:2006
(category C) £41.60 members, £43.33 non-members
NCE/2 GEL/86/3
Generators. Photovoltaic arrays
£168.00 members, £175.00 non-members
IEC CISPR 15:-
GEL/82
IEC 62271:High-voltage switchgear and
IEC 62347:2006
Limits and methods of
Guidance on system dependability
measurement of radio disturbance
specifications £92.80 members, £96.67 non-members
characteristics of electrical lighting
DS/1
controlgear
and similar equipment AMENDMENT 1:October 2006
£32.00 members, £33.33 non-members
GEL/210/11 IEC 62271-300:2006
IEC/TR 62350:2006
Seismic qualification of alternating
Guide on the correct use of
current circuit-breakers £76.80 members, £80.00 non-members
protective devices (RCDs) for
residual current-operated
PEL/17/1
IEC/PAS PUBLICATIONS
household and similar use £84.80 members, £88.33 non-members
IEC/PAS 62500:2006 Process management for avionics.
PEL/23/1 IEC 62337:2006 Commissioning of electrical,
Electrical and instrumentation loop
systems in the process industry.
highly accelerated tests in avionic systems £92.80 members, £96.67 non-members
IEC 62382:2006
instrumentation and control
Guide for defining and performing
GEL/107
check £64.00 members, £66.67 non-members
Specific phases and milestones £84.80 members, £88.33 non-members
GEL/65
GEL/65
ISO PUBLICATIONS ISO 180:-
IEC 62339:-
IEC 62392:2006
Plastics. Determination of Izod
Modular component interfaces for
Suitability of typical electrical
impact strength AMENDMENT 1:December 2006
insulating material (EIM) for
surface-mount fluid distribution
£12.80 members, £13.33 non-members
polymer recycling £64.00 members, £66.67 non-members
components
PRI/21 GEL/15
IEC 62339-1:2006 Elastomeric seals
ISO 839:-
£27.20 members, £28.33 non-members
GEL/65/4
IEC/TS 62441:2006
Milling machine arbors with 7/24
Accidentally caused candle flame
tapers
ignition for audio/video, communication and information
IEC 62343:Dynamic modules
ISO 839-1:2006 (Edition 2) Dimensions
technology equipment £32.00 members, £33.33 non-members
EPL/108
£35.20 members, £36.67 non-members
MTE/5
ISO PUBLICATIONS
Page 65 of 71
ISO 845:2006 (Edition 3)
ISO 2780:2006 (Edition 3)
ISO 5418-1:2006 (Edition 2)
Cellular plastics and rubbers.
Milling cutters with tenon drive.
2,2'-biquinolyl spectrophotometric
Determination of apparent density £30.40 members, £31.67 non-members
Interchangeability dimensions for
method £51.20 members, £53.33 non-members
PRI/72
cutter arbors. Metric series £35.20 members, £36.67 non-members
ISE/58 MTE/5
ISO 1017:2006 (Edition 3)
ISO 5418-2:2006
Brown coals and lignites.
ISO 3842:2006 (Edition 4)
Determination of acetone- soluble
Road vehicles. Fifth wheels.
material (resinous substances) in
Interchangeability £40.00 members, £41.67 non-members
the benzene-soluble extract £30.40 members, £31.67 non-members
Flame atomic absorption spectrophotometric method £51.20 members, £53.33 non-members
ISE/58 AUE/13 ISO 5659:-
PTI/16
Plastics. Smoke generation
ISO 3889:2006 (Edition 2)
ISO 1522:2006 (Edition 3)
Milk and milk products.
Paints and varnishes. Pendulum
Specification of Mojonnier-type fat
damping test £46.40 members, £48.33 non-members
extraction flasks £35.20 members, £36.67 non-members
ISO 5659-2:2006 (Edition 2) Determination of optical density by
STI/10
AW/5
a single-chamber test £94.40 members, £98.33 non-members
PRI/26 ISO 1739:2006 (Edition 2)
ISO 4568:2006 (Edition 3)
ISO 5667:-
Butter. Determination of the
Shipbuilding. Sea-going vessels.
Water quality. Sampling
refractive index of the fat
Windlasses and anchor capstans £46.40 members, £48.33 non-members
(reference method) £30.40 members, £31.67 non-members
SME/32/4 AW/5
Guidance on sampling programmes and techniques £86.40 members, £90.00 non-members
ISO 4869:Acoustics. Hearing protectors
ISO 2692:2006 (Edition 2)
ISO 5667-1:2006 (Edition 2)
EH/3/6
Technical drawings. Geometrical tolerancing. Maximum material
ISO 4869-2:-
requirement, minimum material
Estimation of effective A-weighted
ISO 6070:-
requirement, reciprocity
sound pressure levels when
Auxiliary tables for vibration
requirement £86.40 members, £90.00 non-members
hearing protectors are worn CORRIGENDUM 1:September 2006
generators. Methods of describing
PH/7
equipment characteristics CORRIGENDUM 1:September 2006
GME/21
TDW/4 ISO 5418:Iron ores. Determination of copper
ISO 6993:-
content
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels
ISO PUBLICATIONS
Page 66 of 71
ISO 6993-2:2006
ISO/IEC 8824:-
ISO 9096:-
Fittings at a maximum operating
Information technology. Abstract
Stationary source emissions.
pressure of 200 mbar (20 kPa) £64.00 members, £66.67 non-members
syntax notation one (ASN.1)
Manual determination of mass
PRI/88/2/P6
concentration of particulate matter CORRIGENDUM 1:December 2006
EH/2/1
ISO/IEC 8824-1:Specification of basic notation
AMENDMENT 3:December 2006
ISO 7500:-
ISO 9682:-
£94.40 members, £98.33 non-members
Metallic materials. Verification of
IST/6
static uniaxial testing machines
ISO 7500-2:2006 (Edition 2)
ISO/IEC 8824-2:-
Tension creep testing machines.
CORRIGENDUM 1:December 2006
Periodate spectrophotometric
IST/6
ISE/NFE/4/1
manganese content
ISO 9682-2:2006
Information object specification
Verification of the force applied £64.00 members, £66.67 non-members
Iron ores. Determination of
method £56.00 members, £58.33 non-members
ISE/58
ISO/IEC 8825:Encoding rules
ISO 9683:-
ISO 8510:Adhesives. Peel test for a
ISO/IEC 8825-3:-
flexible-bonded-to-rigid test
Specification of encoding control
specimen assembly
notation (ECN) AMENDMENT 2:December 2006
Iron ores. Determination of vanadium content
ISO 9683-1:2006
£12.80 members, £13.33 non-members
ISO 8510-2:2006 (Edition 2) 180$0D peel
BPHA spectrophotometric method
IST/6
£51.20 members, £53.33 non-members
ISE/58
£35.20 members, £36.67 non-members
ISO/IEC 8825-4:-
PRI/52
ISO/IEC 8802:-
Information technology. ASN.1 encoding rules: XML encoding
ISO 9816:2006 (Edition 2)
rules (XER) AMENDMENT 2:December 2006
Passenger cars. Power-off reaction of a vehicle in a turn. Open-loop
£12.80 members, £13.33 non-members
Information technology. Telecommunications and
IST/6
information exchange between
test method £73.60 members, £76.67 non-members
AUE/15
systems. Local and metropolitan area networks. Specific
ISO 8873:-
requirements
Rigid cellular plastics.
ISO 10303:-
Spray-applied polyurethane foam
Industrial automation systems and integration. Product data
ISO/IEC 8802-11:Wireless LAN medium access
ISO 8873-1:2006
control (MAC) and physical layer
Material specifications
(PHY) specifications. Amendment
£46.40 members, £48.33 non-members
6: Medium access AMENDMENT 6:December 2006
representation and exchange
ISO 10303-112:2006
PRI/72
Integrated application resource: modelling commands for the
£160.00 members, £166.67 non-members
IST/6
exchange of procedurally represented 2D CAD models £124.80 members, £130.00 non-members
AMT/4 ISO PUBLICATIONS
Page 67 of 71
ISO 11898-3:ISO 10303-503:-
Low-speed, fault-tolerant,
Application interpreted construct:
medium-dependent interface CORRIGENDUM 1:December 2006
geometrically bounded 2D
ISO 14224:2006 (Edition 2) Petroleum, petrochemical and natural gas industries. Collection
AUE/16
wireframe CORRIGENDUM 1:December 2006
and exchange of reliability and maintenance data for equipment £160.00 members, £166.67 non-members
AMT/4 ISO 11962:-
PSE/17
Micrographics. Image mark (blip)
ISO 10535:2006 (Edition 2)
used with 16 mm and 35mm roll microfilm CORRIGENDUM 1:December 2006
Hoists for the transfer of disabled
IDT/1/2
persons. Requirements and test
ISO 14229:2006 (Edition 2) Road vehicles. Unified diagnostic
methods £110.40 members, £115.00 non-members
services (UDS). Specification and
ISO 13041:-
CH/173/-/6
requirements £198.40 members, £206.67 non-members
Test conditions for numerically controlled turning machines and
AUE/16
turning centres
ISO 10813:Vibration generating machines. Guidance for selection
ISO/IEC 14496:-
ISO 13041-5:2006
Information technology. Coding of
Accuracy of feeds, speeds and
audio-visual objects
interpolations £46.40 members, £48.33 non-members
ISO 10813-1:Equipment for environmental
MTE/1
testing CORRIGENDUM 1:December 2006
Animation framework extension
GME/21/2
(AFX) £168.00 members, £175.00 non-members
ISO 13584:Industrial automation systems and
ISO 11535:2006 (Edition 2)
ISO/IEC 14496-16:2006 (Edition 2)
integration. Parts library
IST/37
Iron ores. Determination of various elements. Inductively coupled
ISO 13584-511:2006
plasma atomic emission
Mechanical systems and
spectrometric method £76.80 members, £80.00 non-members
components for general use.
ISE/58
ISO 14505:Ergonomics of the thermal environment. Thermal environment
Reference dictionary for fasteners £168.00 members, £175.00 non-members
in vehicles
AMT/4 ISO 11565:2006 (Edition 2)
Determination of equivalent temperature £76.80 members, £80.00 non-members
ISO 13994:-
Road vehicles. Spark plugs. Test
Clothing for protection against
methods and requirements £46.40 members, £48.33 non-members
liquid chemicals. Determination of
PH/9/1
the resistance of protective clothing
MCE/9
materials to penetration by liquids under pressure CORRIGENDUM 1:October 2006
ISO 11898:Road vehicles. Controller area network (CAN)
ISO 14505-2:2006
ISO 14890:-
PH/3/3
Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use CORRIGENDUM 1:November 2006
PRI/67
ISO PUBLICATIONS
Page 68 of 71
ISO 15071:-
ISO 15901-2:2006
ISO 17775:2006
Hexagon bolts with flange. Small
Analysis of mesopores and
Aircraft. Ground service
series. Product grade A CORRIGENDUM 1:December 2006
macropores by gas adsorption £86.40 members, £90.00 non-members
connections. Potable water,
FME/9/3
LBI/37
toilet-flush water and toilet drain £30.40 members, £31.67 non-members
ACE/69 ISO 15072:Hexagon bolts with flange with
ISO 16100:-
metric fine pitch thread. Small
Industrial automation systems and
ISO/TR 18124:2006
series. Product grade A CORRIGENDUM 1:December 2006
integration. Manufacturing software
Plastics piping systems. Multilayer
capability profiling for
M (metal) pipes. Test method for
interoperability
strength of the weld line in the
FME/9/3
metal layer and bonding between
ISO/IEC 15444:-
ISO 16100-4:2006
Information technology. JPEG
Conformance test methods, criteria
2000 image coding system
and reports £86.40 members, £90.00 non-members
layers by use of a cone £35.20 members, £36.67 non-members
PRI/88/4
AMT/5
ISO/IEC 15444-9:-
ISO 18909:Photography. Processed
Interactivity tools, APIs and protocols AMENDMENT 1:December 2006
photographic colour films and
ISO 16234:2006
paper prints. Methods for
Heavy commercial vehicles and
£12.80 members, £13.33 non-members
IST/37
measuring image stability CORRIGENDUM 1:December 2006
buses. Straight ahead braking on
CPW/42
surfaces with split coefficient of friction. Open test method £60.80 members, £63.33 non-members
ISO 15662:2006 Intelligent transport systems. Wide
ISO 19092:-
AUE/15
Financial services. Biometrics
area communication. Protocol management information £89.60 members, £93.33 non-members
EPL/278
ISO 16792:2006
ISO 19092-1:2006
Technical product documentation
Security framework
(TPD). Digital product definition,
£134.40 members, £140.00 non-members
data practices £134.40 members, £140.00 non-members
ISO/IEC 15693:Identification cards. Contactless
IST/12 TDW/4 ISO/IEC 19798:2006
integrated circuit cards. Vicinity cards
Method for the determination of
ISO/IEC 17345:2006 (Edition 2) ISO/IEC 15693-2:2006 (Edition 2) Air interface and initialization
Information technology. Data
£12.80 members, £13.33 non-members
density optical (UDO) disk
Pore size distribution and porosity of solid materials by mercury
electrophotographic printers and multi-function devices that contain
interchange on 130 mm rewritable
printer components £64.00 members, £66.67 non-members
and write once read many ultra
IST/17
ISO 15901:-
toner cartridge yield for colour
IST/3
cartridges. Capacity: 30 Gbytes per cartridge. First generation £160.00 members, £166.67 non-members
ISO/IEC 21000:-
ICT/-/1
Information technology. Multimedia framework (MPEG-21)
porosimetry and gas adsorption
ISO PUBLICATIONS
Page 69 of 71
ISO/IEC 21000-6:-
ISO 22489:2006
Rights data dictionary. Amendment
Microbeam analysis. Electron
1: Digital item identifier relationship
probe microanalysis. Quantitative
types AMENDMENT 1:December 2006
point analysis for bulk specimen
ISO/IEC 23360-5:2006 Specification for PPC32
£124.80 members, £130.00 non-members
using wavelength dispersive X-ray
£12.80 members, £13.33 non-members
IST/37
IST/5
spectroscopy £56.00 members, £58.33 non-members
CII/9
ISO/IEC 23002:-
Amendment 1: Additional C++
Information technology. MPEG
bindings AMENDMENT 1:December 2006
video technologies
Specification for PPC64
£124.80 members, £130.00 non-members
ISO/IEC 21000-10:Digital item processing.
ISO/IEC 23360-6:2006
IST/5
ISO/IEC 23360-7:2006
£12.80 members, £13.33 non-members
Specification for S390
IST/37
ISO/IEC 23002-1:2006
£124.80 members, £130.00 non-members
Accuracy requirements for
IST/5
implementation of integer-output
ISO 21078:-
8x8 inverse discrete cosine
Determination of boron (III) oxide in
transform £51.20 members, £53.33 non-members
refractory products
ISO/IEC 23360-8:2006 Specification for S390X
IST/37 ISO 21078-2:2006 Acid extraction method for the
architecture £124.80 members, £130.00 non-members
IST/5
ISO/IEC 23360:-
determination of boron (III) oxide in
Linux standard base (LSB) core
binder components £46.40 members, £48.33 non-members
specification 3.1
RPI/1
ISO 21487:2006 Small craft. Permanently installed
ISO/IEC 24711:2006 Method for determination of ink
ISO/IEC 23360-1:2006
cartridge yield for colour inkjet
Generic specification
printers and multi-function devices
£233.60 members, £243.33 non-members
that may contain printer
IST/5
petrol and diesel fuel tanks £40.00 members, £41.67 non-members
components £81.60 members, £85.00 non-members
IST/3 GME/33
ISO/IEC 23360-2:2006 Specification for IA32
ISO/IEC 24712:2006
£124.80 members, £130.00 non-members
ISO 21849:2006
IST/5
Aircraft and space. Industrial data.
ISO/IEC 23360-3:2006 Specification for IA64
ACE/1
of office equipment consumable yield £81.60 members, £85.00 non-members
Product identification and traceability £110.40 members, £115.00 non-members
Colour test pages for measurement
IST/3
£134.40 members, £140.00 non-members
IST/5
ISO/IEC 24738:2006 Information technology. Icon symbols and functions for
ISO/IEC 23360-4:2006
multimedia link attributes £68.80 members, £71.67 non-members
Specification for AMD64
£124.80 members, £130.00 non-members
IST/5
ISO PUBLICATIONS
ICT/-/1
Page 70 of 71
ISO/IEC 25436:2006 Information technology. Eiffel: analysis, design and programming language £160.00 members, £166.67 non-members
IST/5
ISO/IEC 26300:2006 Information technology. Open document format for office applications (open document) v1.0 £241.60 members, £251.67 non-members
IST/41
ISO/IEC/TR 26927:2006 Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Mobility for enterprise communications £84.80 members, £88.33 non-members
IST/6
ISO/IEC GUIDE 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation £86.40 members, £90.00 non-members
GEL/3
ISO/PAS PUBLICATIONS ISO/PAS 11154:2006 Road vehicles. Roof load carriers
£134.40 members, £140.00 non-members
AUE/9
ISO/PAS PUBLICATIONS
Page 71 of 71