Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
... More tables wi
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
ff
HH
Value Parts Catalogue
October/November Edition 2014 issue of the Koncept Tech High Value Parts catalogue Our October / November edition contains among others, the following news:
Heavily expanded grinder/mincer list of machinery we supply parts for Simo® Grinder/mincer list of machinery we supply parts for More tables with part numbers for easy reference when placing orders/asking for quotations Cozzini® table of part numbers for Cozzini® pumps
Our range of parts is expanded every month by 10-50 new parts – which are added to the Koncept Tech Parts Portal www.koncepttech.com.
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® / Simo Grinder Parts We supply parts for the following mincers/grinders: GEA® PowerGrind 280 GEA® AutoGrind 280 GEA® AutoGrind 200 GEA® UniGrind 160 GEA® UniGrind 200 GEA® UniGrind 250 GEA® ComboGrind 1500/250 GEA® MaxiGrind 400 GEA® MaxiGrind 400 HD (Heavy Duty) CFS® PowerGrind 280 CFS® AutoGrind 280 CFS® AutoGrind 200 CFS® UniGrind 160 CFS® UniGrind 200 CFS® UniGrind 250 CFS® SpeedGrind 250 CFS® ComboGrind 1500/250 CFS® ComboGrind 850/200 CFS® MaxiGrind 400 CFS® MaxiGrind 400 HD (Heavy Duty) CFS® ChunkMaster 400 CFS® SuperGrind 300/150 CFS® SuperGrind 300/230 CFS® SuperGrind 400/190
CFS® SuperGrind 400/260 CFS® SuperGrind 400/260-HD CFS® SuperGrind 550/260-HD CFS®ComboGrind 850/200 CFS® ComboGrind 1500/250 CFS® SpeedGrind 250/75 CFS® SpeedGrind 250/125 Wolfking® C.400-UNI-(L, S or S2T) Wolfking® C.400-UNI-HD (S or S2T) Wolfking® C.400-2T70 Wolfking® B.400-UNI-(L, S or S2T) Wolfking® B.400-UNI-HD (L, S or S2T) Wolfking® BB.400 Wolfking® BF.400 Wolfking® BMF.400 Wolfking® Self Feeding Grinder, SFG 800/200 Wolfking® Self Feeding Grinder, SFG 1500/250 Wolfking® Homogenizer 250/75 Wolfking® Homogenizer 250/125
Simo® SuperGrind 300/150 Simo® SuperGrind 300/230 Simo® SuperGrind 400/190 Simo® SuperGrind 400/260 Simo® SuperGrind 400/260-HD Simo® SuperGrind 550/260-HD
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 1 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® / Simo Grinder Parts
Grinder Parts Type: Waliant 140, C.160-UNI, C.200-UNI, C.250-UNI, C.300-UNI, C.400-UNI, C.400-2T70, B.400, BB.400, BF.400, FBG.300 -
Worms/augers Linings Knife housings Clamps for knife housings Clamps for linings Distance rings for knife housings Major parts BES Major parts CFD Gear boxes Pulleys Belt pulleys Knife sets all types Pilot bearings Roller bearings Bushings D-nuts for bushings
-
Machine shoes Accessory trolleys Screw caps
Lining for C.250-UNI
Ø400 knife housing
Machine shoes
Cylinder for BES Roller bearing, bushing, and D-nut
Machine Type
Part number
C.250 C.400
34006 30690
Clamps
Lining for C.160-UNI
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 1 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA®/ Simo Grinder Parts - Continued
Machine Type
nut
Bushing
Roller bearing
C.160-Uni C.200-Uni C.250-Uni C.300-Uni C.400-Uni
30667 30664 30005 36588 309664/30666
30991 30819 31246 35920 3037832554
N/A N/A 31177 36587 32549
D-Nut, lining and roller bearing
D-nut, roller bearing and lining.
Machine Type
Pilot Bearing
C.160 C.200 C.250 C.400
30353 30343 30351/367446 32555
Pilot bearing for C.400-UNI
Pilot bearing for C.250-UNI
Pilot bearing for C.160-UNI
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 2 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger Worm/Auger types
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger Worm/Auger types Part number Description Diameter mm Lenght (L1) 30186 Worm, C250-L 1189 Wolfking® / CFS® / GEA® Grinder Parts –192 Worm / Auger 30053 Worm, C250-S 192 929 Worm/Auger types 30179 Worm, TSMG-XXXX/250-L 192 1047 32455 Worm, C200-L (SS) 126 1072 32924 Worm, C200-S (SS) Grinder Parts –126 Wolfking® / CFS® / GEA® Worm / Auger 32923 types Worm, TSMG-XXXX/200-L (SS) 126 Worm/Auger 37327 Worm, C300 (SS) 192 979 31035 Worm, C400-S (SS) 310/354 1241 (48,875) 30960 Worm, C400-S2T (SS) 255/354 1241 (48,875) 31200 Worm, B400-S2T 255/354 1641 (64,625) 45260 Worm, BF400 HD Part number Description Diameter mm Lenght (L3) 30182 Worm, TSMG-XXXX/250-L/CFD 192 1033 30302 Worm, C250-L/CFD 192 1175 30303 Worm, C250-S/CFD 192 915 30551 Worm, C250-s2T/CFD 147/192 854 35540001 Feeding worm AG 280 3550847K Grinding worm AG 280 3550847K-S Grinding worm AG 280, special 3550848M Grinding worm AG 280 840 3550848M-S Grinding worm AG 280, special
Lenght (L2) Pin part number 153 30024 153 30024 153 30024 32933 32933 32933 153 37328 220 (8,66) 30229 221 (8,66) 30229 222 (8,66) 30229 Lenght (L4) Pin part number 110 30228 112 30228 112 30228 153 30024
130
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 3 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger
Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger Worm pin
Auger/worm for C.160-UNI-L & S
Worm pin
Auger/worm for C.160-UNI-L & S
Worm pin
Auger/worm for C.160-UNI-L & S
Worm pin
Auger/worm for C.160-UNI-L & S
Worm pin
Auger/worm for C.400-UNI-S & S2T
Worm pin
Auger/worm for C.400-UNI-S & S2T
Worm pin
Auger/worm for C.400-UNI-S & S2T
Worm pin
Auger/worm for C.400-UNI-S & S2T
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 4 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.400/B.400
Gear box for C.250
Gear box for C.160/C.200
Gear box for C.160/C.200
Drive shaft for C.400/B.400 Gearbox
Drive shaft for C.250 Gearbox
Drive shaft for C.160/C.200 Gearbox Gear box for C.160/C.200
Gear box for C.160/C.200 Drive shaft for C.400/B.400 Gearbox Gearbox Gear box for C.400/B.400
Drive shaft for C.250 Gearbox Gearbox Gear box for C.250
Drive shaft for C.400/B.400 Gearbox
Drive shaft for C.250 Gearbox
Shaft sealing for C.400/B.400 Gearbox
Shaft sealing for C.250 Gearbox
Drive forC.400/B.400 C.400/B.400 Gearbox Gearshaft box for Gearbox
Drive shaft for C.400/B.400 Gearbox
Drivebox shaft C.250 Gearbox Gear forfor C.250 Gearbox
Drive shaft for C.250 Gearbox David Brown Gearbox for C.400/B.400-UNI/Heavy Duty
Drive shaft for C.160/C.200 Gearbox Gearbox
Drive shaft for C.160/C.200 Gearbox PS Seal for C.160/C.200 Gearbox
Drive shaft for C.160/C.200 Gearbox Gearbox
Drive shaft for C.160/C.200 Gearbox
PS Seal for C.160/C.200 Gearbox Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
Shaft sealing for C.400/B.400 Gearbox
Shaft sealing for C.250 Gearbox
www.koncepttech.com
All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Gear box for C.400/B.400 Drive shaft for C.400/B.400 Gearbox Gearbox
Gear box for C.250
shaft PageDrive 5 of 18for C.250 Gearbox Gearbox
Drive shaft for C.160/C.200 Gearbox Gearbox
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts
Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Pos. no. for BF400/BB400 HD
Description
Complete gear unit 1 GearParts housing, belt Box pulleyParts Wolfking® / CFS® / GEA® Grinder - Gear 2 Gear housing, worm 3 Drive shaft 19 teeth Ø80 4 Drive shaft gear 5:2:1 5 Toothed 99 Box teethParts Wolfking® / CFS® / GEA® Grinder Partswheel - Gear
Pos. no. for C.400/B.400
Description
1 2 3 4 5
Complete gear unit Gear housing, belt pulley Gear housing, worm Drive shaft 19 teeth Ø75 Drive shaft gear 5:2:1 Toothed wheel 99 teeth
Pos. no. for C.250
Description
1 2 3 4 5
Complete gear unit Driving shaft 19 teeth Driving shaft Toothed wheel 84 teeth Gear housing, internal part Gear housing, external part
Pos. no. for C.160/200
Description
3 7 19 20
Complete gear unit Pinion shaft 14 TD Driving shaft gear 3.2:1 Toothed wheel 45 TD Gearbox 30HP outer part
Part number 302421 302421 46115 302422 46635 46119 37647
Part number 30861 30861 46115 302422
Part number 45087 45087 30943 30944 30945 35677 30947
Part number 30860 30860 30286 30245 30295 30410
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 6 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Emulsifier Parts - Ecocut E.225 Emulsifier Ecocut E.225 - Knife housings Emulsifier Parts - Ecocut E.225 -
Pilot bearings QuadroCut: o 4 double knife sets Emulsifier - Ecocut o Parts 3 holeplates andE.225 o 4 knives - Belt pulleys - Pulleys Emulsifier Parts - Ecocut E.225 - Machine shoes - Accessory trolleys QuadroCut knife housing for E. 225
Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® Emulsifiers Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCut knife housing for E.
Ecocut 225 emulsifiers 225
Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® Emulsifiers The scansteel foodtech QuadroCut 225 retrofit kit for Wolfking®/ CFS®/Ecocut GEA® E.225 emulsifiers, type Ecocut E.225, upgrades your existing emulsifier befor capable of RetrofittoKit Wolfking® / CFS® Emulsifiers running production with a knife set consisting of 3 holeplates and/ GEA® 4 knives.
Ecocut 225 emulsifiers
Ecocut 225 emulsifiers Ecocut 225 emulsifiers
The scansteel foodtech QuadroCut 225 retrofit kit is fully adaptable to your existing Wolfking®/CFS®/GEA® emulsifier, type Ecocut E.225./ GEA® Emulsifiers Ecocut E.225 Retrofit Kit for Wolfking® / CFS®
Knife housing shaft for QuadroCut 225
Knife housing shaft for QuadroCut 225
Knife housing shaft for QuadroCut 225
Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® Emulsifiers EmulsifiersQuadroCut knife housing for E. 225
Ecocut 225 emulsifiers
Knife housing shaft for QuadroCut 225
QuadroCut 225 cassette system and QaudroCut 225 knife housing
QuadroCut 225 cassette system
Ecocut E.225 Retrofit Kit for Wolfking® / CFS® GEA® QuadroCut 225 cassette system/ and QaudroCut 225 knife housing Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected] EmulsifiersQuadroCut knife housing for E. Wolfking® / CFS® / www.koncepttech.com 225 GEA® Mixers & Mixer / All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Weiler®, QuadroCut 225 cassette system and QaudroCut 225Haarslev®, knife housing Grinders PartsQuadroCut Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® 225Mincemaster® cassette system type, Weiler® type, type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 7 of 18
QuadroCut 225 cassette system and QaudroCut 225 knife housing
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts Mixers & Mixer/Grinders Type: TSM/TSMV/TSMG/TSMI/TSMIV/TSMIG From 400 L – 7250Parts L Wolfking® / CFS® / GEA® Mixers & Mixer / Grinders - Conical shafts - Shaft sealing sets - Sealings /for discharge gate(s)Mixers & Mixer / Grinders Parts Wolfking® CFS® / GEA®/ - Lid sealings - Machine shoes - For mixer/grinder ->As per above Wolfking® CFS® GEA® Mixers & Mixer / Grinders Parts and see/parts for/grinders
Part number 36290 36068 30272 30273 30276
Description Conical Shaft Conical Shaft UniMix 1500 Conical Shaft Conical Shaft TSM 1500 Conical shaftTSM 600
Lid sealing
Sealing for discharge gate
Lid sealing
Sealing for discharge gate
Lid sealing
Sealing for discharge gate
MachineLid shoes sealing
ShaftSealing sealingfor setdischarge gate
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: +Shaft 45 70271410 sealing set E-mail:
[email protected]
Wolfking® / CFS® / www.koncepttech.com GEA® / Simo® Type All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment Pump Parts Machine manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev®
Shaft sealing set type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that shoes these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 8 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® / Simo® Type Pump Parts Simo® Type Pumps Model 200, 250, 290
Please press ctrl+click to view part numbers at our Parts Portal
Wolfking® / CFS® / GEA® / Simo® Type Pump Parts
Wolfking® / CFS® / GEA® / Simo® Type Pump Parts Description
Part no. DC 200
Part no. DC 250
Drivehub 0120-89 0120-285 Wolfking® / CFS® / GEA® / Simo® Type Pump Parts Staybolt 0120-87H 0120-212H Nut for staybolt 0120-463 0120-202H Impeller ( 1 set = 7 pcs.) 0120-75H 0120-199H Wear plate, lining end 0120-292H 0120-293H Wear plate, bearing end 0120-295H 0120-296H Center cam 0120-76 0120-101 Center cam HD pur/steel N/A N/A Allen screw otmm901-xm16x130 xallenm16x160 Pump Housing 0120-71 0120-204 Axle Journal 0120-251H 0120-211H Pump Worm 0120-649 0120-600
Part no. DC 290 0120-934 0120-236H 0120-202H 012ctrl0-247H 0120-385H 0120-297H 0120-145 0120-0145Pur 290xUnbraco16x200 0120-139H 0120-664H 0120-639
Pump housings 200, 250 and 290
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected] Pump housings 200, 250 and 290 www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that housingsstated 200,otherwise, 250 and 290Tech Aps, has no association or affiliation with any entities/ companies these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers.Pump Unless specifically Koncept listed.
Page 9 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® / Simo® Type Pump Parts
Dr
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® / Simo® Type Pump Parts
Dr
Dr
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF Center Cam for 290, 250 and 200
Dr
Cam for 290, 250 and–200 Wolfking® / CFS® / GEA®Center Contiflow Pump 250 & Vanepump SF & DFWolfking® / CFS® / GEA® / Simo® Type Pump Parts Allen screw Center Cam for 290, 250 and 200 Drive hub Axle Journal
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® / Simo® Type Pump Parts Center Cam for 290, 250 and 200 Axle Journal Axle Journal
Impellers for 290, 250 and 200
Axle Journal Axle Journal
Impellers for 290, 250 and 200
Axle Journal Center Cam HD for 290,pur/steel Pur/Steeland 200
Axle Journal
Impellers for 290, 250 and 200 Axle Journal
Impellers for 290, 250 and 200 Axle Journal Wear plate, lining end
Wear plate, bearing end Axle Journal
Wolfking® / CFS® / GEA® / Simo® Type Pump Parts
Wear plate, bearing end
Wear plate, lining end Wear plate, bearing end Pump worm for DC 290 pump
Wolfking® / plate, bearing end ApS, Energivej Phone: + 45 70271410 E-mail:
[email protected] CFS® /Koncept GEA®Tech / Simo® Type 3, 4180 Soroe, DenmarkWear www.koncepttech.com Pump worm for DC 290 pump Pump Parts All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed. Pump worm for DC 290 pump
Wolfking® / CFS® / GEA® Side plate/pressure part CFD, Contiflow Pump – 250 &
Page 10 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF Side plate/pressure part CFD, SS
Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF Impellers and inserts for impellers Various ContiFlow 250 Pump parts Various ContiFlow 250 Pump parts
Wolfking® / CFS® / GEA® / CFS® GEA® Recoscreen – Mechanical deboning machine Recoscreen – Mechanical VariousWolfking® ContiFlow 250 Pump /parts deboning machineImpellers and Various ContiFlow 250 Pump parts
inserts for impellers
Parts available for Mechanical Deboning Machine types:
Wolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machine
RecoScreen (deboner):
Type RS 100 and Type RS 150
Filter types:
Split Filter
Various ContiFlow 250 Pump parts
Hole Filter
Cozzini® Type Pump Parts Various ContiFlow 250 Pump parts
Wolfking® / Wolfking® / CFS® / GEA® Recoscreen Mechanical deboning machine 0.4 / 0.25 mm 3.00 – mm CFS® / GEA® Recoscreen – 0.5 mm 3.25 mm Mechanical deboning machine Cozzini® Type 0.6 mm 4.00 mm Pump Partsparts Wolfking® / CFS® / GEA® Recoscreen – Mechanical machine Various ContiFlow 250 Pumpdeboning 0.8 mm Other parts:
Screw Cone
Pumps:
5.25 mm
Wolfking® / CFS® / GEA® Recoscreen – Mechanical Cozzini® Type Pump deboning machineImpellers and PartsCozzini® Type Pump Parts inserts for impellers
Cozzini® Type Pump Parts
Wolfking® / CFS® / GEA® Recoscreen – Mechanical Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected] deboning machineImpellers and
Type DC 200 (see pump section for details)Type DC 250 (see pump section for details)
www.koncepttech.com
inserts for impellers
All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 11 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Cozzini® Type Pump Parts
Cozzini® Type Pump PartsCozzini® Type Pump Parts
Cozzini® Type Pump Parts
Cozzini® Type Pump PartsCozzini® Type Pump Parts
Cozzini® Type Pump PartsCozzini® Type Pump Parts
Position numbers for Cozzini Pump 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Cozzini Part number CVP3X002 CVP3X021 CVP3X006 CVP3X012 CVP3X016 CVP3X028 CVP3X034 CVP3X037 07-001-0010 98-SPX9P113B 98-SPX9P111B 11-005-0111 CVP3X022 CVP3X025 FNC10142 FNC04065 03-012-1759 12-001-0001 03-012-1759 03-012-1752
Description HOUSING PUMP PUMP COVER CAM COVER BUSHING WEAR LINER THRUST WASHER VANE SET ROTOR BUSHINGS THRUST WASHER PUMP DRIVE SHAFT CLAMP HINGE PUMP & COVER ADAPTOR HINGE Hex Bolt -3 8-16 NC - 5 NC Hex Nut Nylon Insert 3 8 - 16 NC Hex Bolt -3 8-16 UNC - 0.75 NC O RING Socket Bolt -3 8-16 NC - .75 NC Socket Bolt -3 8-16 NC - 1.5 NC
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 12 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Cozzini® Type Pump Parts
Full range of spare and wear parts for Cozzini® pumps – Feel free to Cozzini® Type Pump send usParts your parts number list plus the pump type/model name in order for us to provide you with our quotation
Cozzini® Type Pump Parts
Cozzini®
Full range of spare and wear parts for Cozzini® pumps – Feel free to send us your parts number list plus the pump type/model name in Type Pump Parts order for us to provide you with our quotation
Full range of spare and wear parts for Cozzini® pumps – Feel free to send us your parts number list plus the pump type/model name in order for us to provide you with our quotation
Full range of spare and wear parts for Cozzini® pumps – Feel free to send us your parts number list plus the pump type/model name in order for us to provide you with our quotation
Example of Cozzini® type pump.
For complete new scansteel pumps, please ask scansteel foodtech for a quote for our scansteel foodtech pump
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
For complete new scansteel pumps, please ask scansteel www.koncepttech.com foodtech for a quote for our scansteel foodtech pump
All items, parts, and accessoriesand listed onExchange the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment Refurbishments manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech®® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® Parts Example of Cozzini type type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies
pump. listed.
Page 13 ofFor 18 complete new scansteel pumps, please ask scansteel foodtech for a quote for our scansteel foodtech pump
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Refurbishments and Exchange Parts
Refurbishments and Exchange Parts For all worms/augers, linings, knife housings, and gear boxes we are able to supply you with
Refurbishments and Exchange Parts a repair service. You send us the part that needs refurbishment and we return the refurbished part to you. Furthermore, we also offer you the possibility to get an extra 15% discount when buying new parts! This discount will be obtained when you return your old worm/auger, lining, knife housing, or gear box.
Refurbishments and Exchange Parts
Refurbishments and Exchange Parts For all worms/augers, linings, knife housings, and gear boxes we are able to supply you with a repair service. You send us the part that needs refurbishment and we return the Refurbishments Exchange Parts refurbishedand part to you. Furthermore, we also offer you the possibility to get an extra 15% discount when buying new parts! This discount will be obtained when you return your old worm/auger, lining, knife housing, or gear box. Ø400 knife housing refurbished
Gear box for C.400 refurbished
New Machines – www.scansteelfoodtech.com Gear box for C.400 refurbished New Machines – www.scansteelfoodte For all worms/augers, linings, knife housings, and gear boxes we are able to supply you with ch.comØ400 knife housing Gear box C.400 refurbished a repair service. You send us the part that needs refurbishment andforwe return the refurbished New Machines – www.scansteelfoodtech.com
Refurbishments and Exchange Parts
refurbished part to you. Furthermore, we also offer you the possibility to get an extra 15% discount when buying new parts! This discount will be obtained when you return your old Gear box for C.400 refurbished worm/auger, lining, knife housing, or gear box.
New MachinesNew – www.scansteelfoodtech.com Machines – THE SCANSTEEL FOODTECH GROUP – www.scansteelfoodtech.com www.scansteelfoodte - ch.com Suppliers of our own manufactured grinders, mixers, vacuum mixers, mixer/grinders, pumps,
Refurbishments and Exchange Parts
conveyors, as well as complete processing lines. Newemulsifiers, Machinessilos, – www.scansteelfoodtech.com -
scansteel For allfoodtech worms/augers, Group is linings, amongknife the World's housings, most andinnovative gear boxesmanufacturers we are able toofsupply food preparation you with machinery, complete processing linesrefurbishment and solutions for a repair equipment, service. Youand send us the part that needs andthe weglobal returnfood the processing New Machines – industry. refurbished The main part focus to you. is on Furthermore, the global meat, we also poultry, offer and you cheese the possibility processing to get industries, an extraas15% well as on www.scansteelfoodte new and parts! discount will be obtained when you return your old the discount global petwhen food,buying rendering, furThis industry. ch.com Ø400 knife housing worm/auger, lining, knife housing, or gear box. refurbished
New Machines – Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected] www.scansteelfoodte www.koncepttech.com THE SCANSTEEL GROUP – www.scansteelfoodtech.com ch.comØ400 knifeFOODTECH housing All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment refurbished manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
-
Suppliers of our own manufactured grinders, mixers, vacuum mixers, mixer/grinders, pumps, emulsifiers, silos, conveyors, as well as complete processing lines. scansteel foodtech Group is among the World's Page 14most of 18innovative manufacturers of food preparation machinery, equipment, and complete processing lines and solutions for the global food processing
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Meet our Global Team
New Machines – www.scansteelfoodtech.com Denmark www.koncepttech.com
Used Machines – www.koncepttech.com/used-machines
Robert Holst Sales and parts shipping Tel: +45 20 38 68 64 Fax: +45 70 27 14 11 E-mail:
[email protected] Helle Friis Olsen Sales and global agent support Tel: +45 21 28 27 85 E-mail:
[email protected]
Ms. Tatjana Jensen Russian/English/Finnish/Danish: Tel: +45 2019 5666 E-mail:
[email protected]
Used Machines – www.koncepttech.com/used-machinesMeet our Global Team
Denmark (Fur Industry)
Mr. Kaj Jensen English/German/Danish: Tel: +45 9843 1166 E-mail:
[email protected]
New Machines – www.scansteelfoodtech.com Sales Mr. Franck Bernardot cell: +33 6080 34314 E-mail:
[email protected]
France www.francedanemarkmateriel.fr
Director Mr. Löic Le Coz cell +33 608 27 8628 E-mail:
[email protected]
Marta Staniszewska E-mail:
[email protected] Tel: +48 531 464 264 Poland www.premac.pl
Wojciech Nawrocki E-mail:
[email protected] E-Mail:
[email protected] Tel: +48 531 463 475
Chile
DANIEL MORELLATTO e-mail:
[email protected] Phone +56 9 98415415
Mexico
Sr. Jose Luis Malagon Phone: (044 81) 82 53 03 90 E-Mail:
[email protected] www.tpdemos.com/clientes/ssteel
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 15 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Daglig leder: Odd Breigutu E-post:
[email protected] Phone: +47 22 91 44 03 Mobil: +47 901 88 910 Salg: Petter Breigutu E-post:
[email protected] Phone: +47 22 91 44 08 Mobil: +47 908 56 777
Norway www.bokken.no
Teknisk: Bjørn Schjelderup-Roemers E-post:
[email protected] Phone: +47 22 91 44 07 Mobil: +47 900 29 998
Mr. Daniel Nielsen Phone: + 34 938 711 177 Mobil: +34 647650362 E-Mail:
[email protected] Spain www.danmix.es
Sr. Javier Urquiza Phone: + 34 938 711 177 Mobil: +34 659 454 599 E-Mail:
[email protected]
Managing Director Charles Parker E-Mail:
[email protected] Sales Aaron Chabino E-Mail:
[email protected]
USA www.scanamcorp.com
Spareparts Mr. Greg Cole Phone: +01 816-210-5528 E-Mail:
[email protected]
Sales/technique Mr. Marc Baaijens E-mail:
[email protected] Sales/technology Mr. Tom Baaijens E-mail:
[email protected]
Belgium Netherlands
Spareparts Mrs. Angeli Merkenhof E-mail:
[email protected]
www.baaijens.nl
Sales support/spareparts Ms. Natasja Janssen E-mail:
[email protected]
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 16 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Mats Strandvall Managing Director Tel direct: +358(0) 207 280 682 Mobil: +358(0) 400 862 694
[email protected]
Finland www.mesmec.fi
Anders Asplund Senior Vice President Tel direct: +358(0) 207 280 683 Mobil: +358(0) 50 50 50 587
[email protected] Jonny Granvik Sales Manager, Trading Services Tel direct: +358(0) 207 280 684 Mobil: +358(0) 40 648 1996
[email protected]
Raz Pessach Business and development Cell phone: +972 (0)52 6440 318 Company phone: +972 9865 1152 Email:
[email protected] Israel www.pessach.net
Orit Sadeh Marketing & customer relations manager Company phone: +972 9865 1152 Email:
[email protected]
Ian Stansfield Sales Executive phone: +44 (0)845 293 2910 Email:
[email protected]
Cell
UK / Ireland
www.selo.com
Joanne Hayes Customer Support Administrator Cell phone: +44 (0)845 293 5990 Email:
[email protected]
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 17 of 18
Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn
Used Machines – www.koncepttech.com/used-machines Interested in used machines? Check out our used machines on the parts portal
Used Machines – www.koncepttech.com/used-machines
Wolfking® / CFS® / GEA® / Simo Grinder PartsUsed Machines – www.koncepttech.com/usedmachines
Used Machines – www.koncepttech.com/used-machines
Koncept Tech ApS, Energivej 3, 4180 Soroe, Denmark Phone: + 45 70271410 E-mail:
[email protected]
www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed.
Page 18 of 18