Resistance to deformation under compression (DIN 53576/B). Crushing on ...
Residual deformation after compression (DIN 53572) ... In mineral oil DIN 53428.
McGuiness Works, Mount Osborne Industrial Park, Oakwell View, Barnsley, South Yorkshire, S71 1HH. T. +44 (0) 1226 329 200 F. +44 (0) 1226 204 558 E.
[email protected] W. www.eriks-gaskets.co.uk
FT8 810 Expanded PVC Data Sheet Properties:
Description
Result - N
Colour White / Brown / Black / Grey Density 100 Kg/m³ Resistance to deformation under compression (DIN 53576/B) Crushing on initial thickness of 25% 89 Crushing on initial thickness of 40% 247 Crushing on initial thickness of 65% 1050 Residual deformation after compression (DIN 53572) Room temperature, crushing 50%, 72 hours Residual deformation after 30 hours 14.6 Residual deformation after 4 hours 8.2 Residual deformation after 24 hours 5.3 Dimensional stability after heat treatment 4h at 60°C (longitu. dir) -0.6 4h at 60°C (transver. dir) -0.5 4h at -30°C (longitu. dir) +0.1 4h at -30°C (transver. dir) +0.1 Resistance to tensile strength / maximum extension (DIN 53571) and change in terms of dimensions of original sample and after different treatments / ageing.
McGuiness Works, Mount Osborne Industrial Park, Oakwell View, Barnsley, South Yorkshire, S71 1HH. T. +44 (0) 1226 329 200 F. +44 (0) 1226 204 558 E.
[email protected] W. www.eriks-gaskets.co.uk
Description Original Sample Warm (60°C) Cold (-30°C) Ageing 24h in steam (hydrolysis 100°C DIN 53578) In mineral oil DIN 53428 In alcohol DIN 53428 In alkaline solution (NaCl 25%) DIN 53428 In water DIN 53428 In petrol (iso-octane) DIN 53428 In concentrated acid solution (H2SO4 40%) DIN 53428 In concentrated alkaline solution (NaOH 40%) DIN 53428
Tract N/mm²
Extens. %
Aver. Dims.VA %
0.34
221
0.29
258
+4.4
0.42
195
-4.7
0.32
200
-56.6
0.23
102
-4.1
0.18
24
-14.3
0.32
237
+1.5
0.33
232
+2.5
0.59
19
-26.5
0.35
233
+0.1
0.35
226
-0.1
Available in a range of thickness from 2mm Adhesive coatings are available. See separate data sheet for details
Figures shown in this data sheet are typical values. The above information is supplied in good faith but no liability is accepted by SPG Ltd. The data sheet does not act as a warranty and the end user should satisfy themselves of its suitability of the product for its intended use.
Rev. 20.07.2010
