Hydroelectric Power Stations. Wind Power Plant. Solar Energy Power Plant. Power Substation. IEEE 1588 PTP V2. Ethernet e
Industrial Product DM
IEC 61850-3 Ethernet Switch Power substation
Communication exTension Conversion
IEEE 1588 V2
Negative voltage
UL60950-1
EN50121-4 IEC61850-3 SmartView
u-Ring
IEEE 1588v2
GOOSE
Features
In power substation environments, where electromagnetic interference is very high, the IPS series of Ethernet switches, complying with IEC61850-3 and IEEE 1613 standards, are especially designed for power substation. In smart grid applications, zero packet loss must be maintained with wide temperature tolerances to ensure reliable packet transmissions.
• Redundant & wide range power inputs (isolated 24/48VDC,110/220V DC/AC) • u-Ring (up-to 5 rings) for redundancy cabling • Cable diagnostic, Green Ethernet • SmartConfigTM for quick & easy mass configuration • SmartViewTM for centralized management • Supports negative power input with isolated RS-232 console port (for example in telecom system) • SNMP, Web, Telnet, CLI, IPV6, DHCP, RMON, MIB II, QoS, CoS, Security, IGMP, VLAN, LACP, IEEE1588 V2
Key Features GOOSE Message For mission-critical applications, GOOSE messages can be placed into the highest QoS priority so as to avoid packet loss and delay. • IPS series Ethernet switches can communicate with GOOSE multicasts. • Critical communications are prioritized with the highest QoS priority. • Achieve zero packet loss to ensure reliable transmissions.
GOOSE
Hydroelectric Power Stations
Wind Power Plant
Solar Energy Power Plant
Power Substation
IEEE 1588 PTP V2 Ethernet equipment has become a widely accepted commodity as it replaces traditional and expensive legacy technology. The multitude of nodes needed to be synchronized as precisely as possible over the network are ever increasing. IEEE1588 PTP V2 is a packet based network protocol that carries time stamps in Ethernet format. The applications requiring this technology fall within the major markets for smart grids and telecommunication networks. IEEE 1588 PTP v2 Application in Power substation & Smart Grid Power Substation
Supports 5 operating mode
Primary Reference Clock (PRC)
• Ordinary-Boundary • Peer to Peer Transparent Clock
IEEE 1588 v2
Wind Power Plant
• End to End Transparent Clock
IEEE 1588 v2
• Master
Backbone Network
• Slave Solar Energy Power Plant
Model List Model IPS-G803SM IPS-803GSM R
Managed
Total Port
11 11
RJ45 Port
Fiber
10/100 10/100/1000 100/1000 Base-TX Base-T Base-X
Redundant Input Power
8
110/220V AC/DC or 24/48, -48V DC 110/220V AC/DC or 24/48, -48V DC
8
3 SFP 3 SFP
CTC UNION TECHNOLOGIES CO., LTD.
8F, No.60, Zhouzi St. Neihu, Taipei 114, Taiwan
TEL : +886 2 2659-1021
Certification IEC61850-3 Railway IEEE1613 EN50121-4
Safety UL60950-1
EN61000-6-2 EN61000-6-4
CE, FCC
FAX : +886 2 2659-0237
[email protected]
Copyright 2017 CTC UNION TECHNOLOGIES CO., LTD.
CTC UNION and the CTC UNION logo are trademarks of CTC UNION TECHNOLOGIES CO., LTD. All rights reserved. All other trademarks are the property of their respective owners.
Specifications & design are subject to change without prior notice. Please visit CTC UNION website for more details.
www.ctcu.com 03/2017 V1.0
