Pro4700 Assembly Instructions

PRO4700 WIRELESS AUDIO KIT (800MHz or 900MHz) KEYPAD, CONSOLE AND RECEIVER ASSEMBLY

ASSEMBLY AND OPERATIONS INSTRUCTIONS

PRO4700 WIRELESS AUDIO KIT CONTENTS Console Box Contents:  PRO4700 Wireless Audio Console

 PRO4700 Wireless Audio Keypad

Auto Adjusts to Your Activity

Focus on Push and Pull of Upper Body

Like a Personal Trainer

Focus on Lower Body Using Stationary Arms

EQ

Customize Your Stride Length

 Audio Jack Assembly

 900MHz (800MHz) Receiver

 Keypad Cable

 Audio Cable

 Heart Rate Cable

 800MHz or 900MHz Receiver Cable

 Console Hardware

 Assembly and Operations Instructions

C-1 C-2

#2 Phillips PRO4700 WIRELESS AUDIO KIT (800MHz or 900MHz)

#2 Phillips

KEYPAD, CONSOLE AND RECEIVER ASSEMBLY

C-3 C-4

ASSEMBLY AND OPERATIONS INSTRUCTIONS

*Hardware illustrated to scale; not actual size.

1

PRO4700 WIRELESS AUDIO KIT ASSEMBLY INSTRUCTIONS Complete these instructions during initial assembly of the PRO4700 elliptical, after mounting the keypad on the mast. For a fully-assembled PRO4700, remove the console, keypad and cable, top cover, and left side shroud to complete these instructions. *Retain all screws for use in this assembly.

A. Audio Jack

 

B. Wireless (800MHz/900 MHz) Receiver

  



Cables not shown

 Route audio cable up through mast hole and out through hole under keypad plate.  Remove bottom screw from water bottle holder.



Cables not shown

 Route receiver cable through mast hole and out through top mast hole on the console side of the mast (not pictured).

 Connect audio cable to audio jack assembly (not illustrated).

 Place receiver on top bar of frame; insert cable tie C-4 (Qty 2) through holes in receiver bracket and secure bracket to frame.

 Loosen screws on audio jack assembly; place assembly over mast plate; tighten screws. Secure with screw to water bottle holder.

 Connect audio jack cable and receiver cable to receiver.

 Remove upper left screw from water bottle holder; insert C-1(Qty 1) through C-3 (cable tie); re-attach to water bottle holder and tighten.

 Remove slack from audio jack cable and secure under keypad plate with cable tie C-3 (not pictured).

C. Keypad



 Route and connect keypad cables per diagram on keypad. Attach ground wires; attach keypad to mast plate with C-2 (Qty 4). 2

D. Console

E. User Settings



Keypad (black, 14-pin)

Heart Rate (white, 3-pin)

Console to Base (white, 14-pin)

Fan (white, 2-pin)

Handlebar Control (white, 6-pin)

Console Ground (metal; green wire)

Pedal the unit to activate the keypad for programming.

900MHz Receiver/C-SAFE (white, 5-pin)

Fan (white, 2-pin) Handlebar Control (white, 6-pin)

Focus on Push and Pull of Upper Body

EQ

 Remove original CSAFE cable (white, 5-pin cable under keypad) and replace with the 900 MHz Receiver/CSAFE cable included in this kit. Route cables (Qty 7) through mast plate.



Auto Adjusts to Your Activity

Console Ground Console to Base Reserved for (white, 14-pin) (metal; green wire) Software Update (black) Heart Rate (white, 3-pin) Keypad (black, 14-pin)

Unused (audio jack) Unused 900MHz Receiver/C-SAFE (white, 8-pin) (white, 5-pin)

Like a Personal Trainer

Focus on Lower Body Using Stationary Arms

EXIT WITHOUT SAVING

PRESS AND HOLD

 EXIT AND SAVE

VIEW OPTIONS

Customize Your Stride Length

 Press and hold / to display programming options.  Press Enter to view setting options as described on following page; press  to select option and move to next setting. (Factory setting shown in BOLD.)  Press Enter when “Exit” is displayed to save selections. Press Pause Clear twice to exit without saving changes.

I. Complete Installation  Match cable connectors to sockets on console back; connect. Note: White 8-pin socket on console back and audio jack are not used for 900MHz (800MHz) installation.  Attach console and covers to mast plate with C-1 (Qty 4).

3

 Replace top cover and left side shroud, or return to PRO4700 Assembly Instructions to complete assembly of new unit.

Warm-Up Clock Direction Max Workout Time Unit Type 900MHz (800MHz) Channels

USER SETTINGS Controls 3-minute warm-up: ON or OFF Controls clock counting: UP or DOWN Sets limit for workout time: 1 to 99 minutes (factory-set at 30:00). Press Enter to scroll in 15-minute increments, or enter value using number keypad. Controls weight and distance display units: ENGLISH (pounds and miles) or METRIC (kilograms and kilometers) Initiates channel programming; press Enter to begin. Press CH () to select the appropriate program modes for your facility: P-1 = MYE Entertainment 900MHz (800MHz) transmitters P-2 = Cardio Theater LCS 900MHz (800MHz) transmitters P-3 = Cardio Theater / Enercise x TV 900MHz (800MHz) transmitters P-4 = BroadcastVision 900MHz (800MHz) transmitters To automatically scan and program channels: With the proper transmitter mode displayed, press Enter to auto-scan and lock transmitters. Repeat as needed for each transmitter type. Press CH () or CH () to verify that “PRESET” appears in the display, indicating that all transmitters have been locked in. Press EQ to save 900MHz (800MHz) CHANNELS and return to user settings. To manually program channels: With the proper transmitter mode displayed, press EQ. Press CH () or CH () to scroll through all transmitter channels. To add or delete a transmitter channel press Enter. NOTE: “PRESET” will appear in the display when a transmitter channel is programmed. To exit manual program mode press the EQ button. The display will blink briefly and will default to first transmitter channel programmed. Use the CH () or CH () to select another transmitter type (P-1 to P-4) as needed and repeat these manual steps.

900MHz (800MHz) Near/Far Beep

Press EQ to save 900MHZ (800MHZ) CHANNELS and return to user settings. Sets the reception sensitivity of the 900MHz (800MHz) receiver, FAR (for most installations) or NEAR (when receiver is installed 1-5 feet from a transmitter). Press Enter to switch from one setting to the other. The Message Center displays the revised setting for 5 seconds, then returns to 900 MHZ (800mhz) NEAR/FAR. Controls console sounds: ON or OFF.

Brightness Controls brightness of the console LEDs: 1 (dim) to 8 (bright). Exit Press Enter to Exit and save settings. Press Pause Clear twice to exit without saving.

4

900MHz (800MHz) Keypad Buttons The table below describes the buttons controlling wireless audio functions on the PRO4700. Refer to PRO4700 Operations Manual for descriptions of the elliptical programming buttons on the keypad. Mute EQ VOL (/)

CH (/)

EQ

Turn TV audio on/off. Change the audio ambiance. Press EQ to select one of 5 preset EQ tones: FLAT, CLASSICAL, JAZZ, ROCK, BASS Increase/decrease audio volume. Note: When the user stops pedaling for 10 seconds or the console is reset, the volume control is automatically reset to level 2. (VOL () is also used to program 900MHz (800MHz) NEAR/FAR in User Settings.) Move backward () or forward () through the 900MHz (800MHz) channels programmed for your facility.

Learn More at www.octanefitness.com Log on to www.octanefitness.com for additional information about product features and answers to many common questions and tips on using your elliptical. If you would like to speak to an Octane Fitness Customer Service specialist, please call 1-888-OCTANE4 or 763-757-2662, extension 1.

5

N O T E S

6

Are you passionate about your workout and the results? Share your story with others on the Octane Fitness web site. Go to: www.octanefitness.com/testimonials Then click on “Share My Story” and show the world how fueled you are. www.octanefitness.com www.youtube.com/user/octanefitness www.facebook.com/octanefitness

F U E L

Y O U R

Octane Fitness US & Canada, Latin America, Asia & Asian Pacific 7601 Northland Drive North Suite 100 Brooklyn Park, MN 55428 Phone: 888.OCTANE4 (US and Canada) 763.757.2662 (Latin America, Asia and Asian Pacific) Fax: 763.323.2064

L I F E™

Octane Fitness International Europe, Middle East, Africa Rivium Westlaan 19 2909 LD, Capelle a/d Ijssel The Netherlands Phone: +31 10 2662412 Fax: +31 10 2662444

©2012 Octane Fitness, LLC. All rights reserved. Octane Fitness and Fuel Your Life are registered trademarks of Octane Fitness. Any use of these trademarks, without the express written consent of Octane Fitness, is forbidden.

105603-001 REV C