Manual. 353551-007. Carton. 352380-001. Pad (2). 352379-001. Filler (1).
355108-001. Pkg,Microfoam. (8). 49790P. Sheets. VRX-AF. Array Frame
Accessory.
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
Technical Manual
JBL VRX932LA-1 SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
SYSTEM COMPONENTS: (CONT’D)
• Nominal Impedance: Passive: 8 Ohms Bi-amp LF: 8 ohms Bi-amp HF: 8 ohms • Power Rating: Continuous / Program / Peak Passive: 800W / 1600W / 3200W Bi-amp LF: 800W / 1600W / 3200W Bi-amp HF: 75W / 150W / 300W • Freq. Response: 75 Hz - 20 kHz (±3 dB) • Frequency Range: 57 Hz – 20 kHz (–10 dB) • System Max. SPL: 130 dB SPL peak (passive mode) LF: 130 dB; HF: 139 dB • System Sensitivity: 95 dB SPL (passive mode) (1 watt @ 1 meter ) LF: 95 dB (Bi-amp mode) HF: 114 dB (Bi-amp mode) • Input Connectors: Neutrik Speakon NL-4 (x2) • Crossover Freq: 1.2 kHz
• Low Frequency Transducers:
SYSTEM COMPONENTS: • Cabinet: • Grille:
Enclosure (Not For Sale) 352282-001
• • • •
2262HPL, 305 mm (12 in) Differential Drive woofer with Neodymium magnet and dual voice coils, and dual magnetic gaps. DC Resistance: 5.1 ohms ± 10% High Frequency (3) 2408J, 38 mm (1.5 in) voice coil, Transducer: Neodymium Compression Driver DC Resistance: 8.9 ohms ± 0.2% Crossover Network: 364375-001
AURAL SWEEP TEST SPECIFICATIONS: A. System Aural Sweep Test: 10.0V Input, 20 Hz to 20 kHz B. L.F. Aural Sweep Test: 10.0V Input, 20 Hz to 1 kHz C. H.F. Aural Sweep Test: 1.0V Input, 200 Hz to 1.5 kHz
PHYSICAL SPECIFICATIONS: • Enclosure Dimensions: • Net Weight:
349 x 597 x 381 mm D (13.75 x 23.5. x 15.0 in. D) 46 lb (21 kg.)
WARRANTY INFORMATION: • Refer to Warranty Statement packed with each product.
WIRING DIAGRAM
PACKAGE Warranty 59660
Manual 353551-007 Carton 352380-001 Pad (2) 352379-001 Filler (1) 355108-001 Pkg,Microfoam (8) 49790P Sheets
Driver Low Freq 2262HPL (338312-004X) Cone Repl C8R2262
Driver (3) High Freq 2408J (361549-003X) Diaph Repl D16R2408
GRN
YEL
Bi-Amp ±1 LF: 8 ohms ±2 HF: 8 ohms Passive ±1 IN: 8 ohms ±2 N/C
GRN/BLK YEL/BLK
Network Assembly 443853-001 Wire Harness Assembly 354410-002
SEE NETWORK SCHEMATIC PAGE - 364375-001 WIRING HARNESS 354410-002
JBL VRX932LA-1 REV E
Faston, Female (3) 0.250 x 0.032 Tinned Brass Negative 17” Filler 361091-001
VRX-AF Array Frame Accessory
Carton 361094-001 Pad 361257-001 Receptacle, 4.20SP 3x3, Molex PN 39-01-2065 or Equiv. Faston, Female (3) 0.187 x 0.020 Tinned Brass Positive
Socket (6) Molex P/N 39-00-0078 or Equiv 02-13
JBL VRX932LA-1 SCHEMATIC 443853-001
2.1uF, 250V
4.8mH
20uF, 250V
0.35mH
20.0 Ohm, 25W
5.1uF, 250V
0.80mH
JBL VRX932LA-1
4.0 Ohm, 25W
3.0uF, 250V
2.5 Ohm, 25W
14uF, 250V
24uF, 250V
100.0 Ohm,25W
12uF, 250V
0.60mH
4.3uF, 250V
1.8 Ohm, 25W
0.5 Ohm, 25W
2.00mF
12uF, 250V
0.15mH 0.30mH
850nF, 250V
1.8 Ohm, 25W
Individual Parts for the above crossover are not available. A complete replacement assembly should be ordered.
COMPONENT EXPLODED VIEW
JBL VRX932LA-1
Network Assembly 443853-001
Bolt (2) 854-00010-64 1/4-20 x 4 HEX,BLKZINC LCS
H/F Harness 354410-002 Mounting Support (4) 381-00023-01 2X M10 90 Degrees (internal cabinet) Screw (8) 882-41110-12 6 x 3/4 PAN,PH,PB,BLK ZINC,LCS
Clip, Pin (4) 363764-001
Screw (7) 882-41110-12 6 x 3/4 PAN,PH,PB, BLK Enclosure Assembly ZINC, LCS VRX932LA-1 (Not Available for Sale)
Screw (4) 882-41110-10 6 x 5/8 PAN,PH,PB, BLK ZINC, LCS
Washer (2) 844-0110-07 1/4 SAE,REG, BLK,ZINC, LCS Washer (2) 844-03110-06 3/8 BLK SPLIT LOCK
Screw (8) 352051-001 M10 x 25MM FLT,PH,BLK ZINC,LCS
T-Nut (8) 61861 10-32 x 7/16 Step Barrel
Drop Lever (2) 364591-003 BLK Nylon Nut (2) 364173-001 #8 U Channel (2) 361417-001 Handle, Front (2) 354543-001
Screw (2) 354379-003 3/16 Dia x 1 LG (shldr) Foam Pad (2) 361372-001
Screw (4) 803-11010-12 8-32 x 3/4 FLT,PH,BLK ZINC,LCS Grille Assembly 352282-001 Screw (6) 882-51110-12 6 x 3/4 OV,PH,PTCL, BLK ZINC,LCS
Driver, Low Freq. 2262HPL (338312-004X) Cone Repl C8R2262 Screw (8) 804-01110-16 10-32 x 1 FIL,PH,BLK ZINC,LCS Gasket 339391-001 12” Dust Dome 71646-04
Horn 364432-001 Gasket (2) 352378-002 Horn Line Array H/F
Pole Cup, Dual 363602-001
Screw (6) 806-11010-12 1/4-20 x 3/4 FLT,PH,UNC, Driver, High Freq. BLK ZINC 2408J (361549-003X) Gasket Diaph Repl 363605-001 D16R2408 Pole Cup Overlay 364659-001
Foot (4) 353445-001 Screw (4) 884-41110-12 10 x 3/4 PAN,PH,PB BLK ZINC, LCS Air Seal Cover (2) 353376-002
JBL VRX932LA-1
Screw (12) 882-41110-12 6 x 3/4 PAN,PH,PB, BLK ZINC, LCS Air Cover Gasket (2) 353538-001
Quick Release Pin (2) 361239-003 W/ Lanyard, L/Shape Handle, Rear (2) 354544-001 Screw (4) 722-90008-08 6-19 x 1/2 HI-LO,PAN,PH, BLK-OX
JBL VRX-AF
ARRAY FRAME ASSEMBLY
Manual 353551-007
• 4” 1/4-20 bolts to horn — 5” — caution! You can break the horn at 60”/lbs, which is prety easy with a ratchet (pull on the end of a 1’ handle with 5 pounds). 35”/lbs = 2.9 ft/lbs. • Screws to handle cup from outside of rigging frame — 16”/lbs. Current production is getting machine screw and keps nut on deviation (which could take much more torque), but when we switch to sheetmetal screw (which can be serviced without removing horn/grille), it wil be sensitive (likely failure torque