185 °C. 4,400 psi. 30 MPa. 140%. 140%. 36,000 psi. 248 MPa. 13.7 ft-lbf /in. 7.3 N-m/cm. 72. 72. 248 °F. 120 °C. Solu
MonoPol™ C100
®
Technical Data Sheet
Product Description MonoPol C100 is a cold water-soluble PVOH compound for injection molding and extrusion applications.
Typical Properties at 23 °C, 50% rh Characteristics
English
Metric
Melt Flow Index (ISO 1133, 190C, 21.6kg)
---
27 g/10 min
Density
---
1.28 g/cm 3
365 °F
185 °C
4,400 psi
30 MPa
140%
140%
36,000 psi
248 MPa
13.7 ft-lbf /in
7.3 N-m/cm
72
72
248 °F
120 °C
Melting Point, DSC Tensile Strength at Yield (ASTM D638) Elongation at Break (ASTM D638) Flexural Modulus (ASTM D790) Izod Impact Strength (ASTM D256) Durometer Hardness, Shore D (ASTM D2240) Vicat Softening Point, 10N, 50°C/hr (ASTM D1525)
*Properties are based on 0.125" thick injection molded plaques. These properties are representative of the product and not to be used for specification purposes. Values are dependent on moisture content, which varies with storage and use conditions.
Solubility @ 0.125" thickness Conditions
Dissolution (hrs)
23°C Distilled Water (MSTM 205)
TBD
MONOSOL, LLC OFFERS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED AND DISCLAIMED. MONOSOL, LLC OFFERS NO WARRANTIES FOR ITS PRODUCTS BEYOND WHAT IS STATED IN THE DESCRIPTION OF THE PRODUCT SET FORTH ON THE FACE HEREOF. data rev: 11/13/2003
MonoSol, LLC 1701 County Line Road Portage, IN 46368 - USA
www.monosol.com
MonoPol® is a Registered Trade Mark of MonoSol, LLC – copyright© 2009 MonoSol,LLC
MonoSol AF, Ltd Oak Dr. Hartlebury Trading Estate Hartlebury, Worcestershire DY10 4JB, UK Rev. Date:
17-Feb-09
